2. Act as enclosure 3. Improve building appearance
Walls for SOFLO are made either by blocks, reinforced concrete, stone or precast concrete.
Type of walls Description Purpose
RC wall Reinforced concrete refers to RC wall adds strength and a type of concrete wall with durability to any wall. vertical steel support bars running through it. The steel Use: To cast these type of has a necessary amount of wall, use of mould ( deformations to allow it to Formworks @ Formscaff) bond with the cement and water making up the concrete. Shear wall Shear walls starts at Shear walls are usually foundation level and are provided along both length continuous throughout the and width of buildings. Shear building height. walls are like vertically- oriented wide beams that carry earthquake loads downwards to the foundation. Load Bearing wall The Load bearing wall are wall Depending on the type of that support all the weight of building and the number of a roof, conducting all its floors, load-bearing walls are weight to a foundation gauged to the appropriate structure. thickness to carry the weight above them. Without doing so, it is possible that an outer wall could become unstable if the load exceeds the strength of the material used, potentially leading to the collapse of the structure. (A load bearing wall cannot be demolish) Parapet wall A parapet is a barrier which is From the parapet wall, an extension of the wall at the another wall is built up. edge of the roof. Non load bearing wall A non bearing wall in only a Use as partitioning. partition that divides the (A non bearing wall can be various rooms of a building. demolish) Ref http://www.masonryconstruction.com/how-to/parapet-walls_o