Вы находитесь на странице: 1из 1

High performance structural steels Alloyed steels for elevated service

HISTAR temperature 16 Mo3


HISTAR steels are more sophisticated The brochure HISTAR, Innovative Thanks to its improved mechanical properties
thermomechanical structural steels that are High-Strength Steels for Economical (specified up to 500C) and improved creep
manufactured with the in-line heat treatment Steel Structures provides additional resistance, 16 Mo3 alloyed steel grade is
process QST (Quenching and Self-Tempering) information including mechanical values and particularly recommented for use at elevated
that is used by ArcelorMittal. With low alloy manufacturing advantages for all available service temperatures.
contents, these steels are characterised by HISTAR brand steels. The advantages 16Mo3 + AR in relation with EN10273 and
excellent welding properties and in addition of HISTAR compared to conventional EN 10028 is now also available in sections
to their high strength are very tough. They structural steels, especially for power plant and merchant bars. Rolled sections of 16Mo3
are manufactured with minimum yield construction, are presented on page 13. grade are far more economical than cutting
strengths of 355 and 460 MPa. HISTAR
and welding plates to build up sections of
steels are delivered in thermomechanically
16Mo3 grade.
rolled condition and are in full compliance
with the requirements of EN 10025-4 The 16Mo3 steel can be welded with all manual
use of HISTAR steels is regulated in Germany and automatic welding processes according to
by the national technical approval Z-30.2-5, the general rules for welding.
in Europe by ETA-10/0156 (ETA : European
Technical Approval).
Table   Mo Mechanical properties
Minimum elongation A
Minimum yield strength ReH Tensile strength Rm L0  S0 Notch impact test
MPa MPa %
Standard Nominal thickness (mm) Nominal thickness (mm) Temperature Min. absorbed energy
! ! C J
 
0 0
0 )
(N 00 00   0 0  0  0 )
(N 0 00 0 0
Table    Mo Mechanical properties at eleYated temperatures
0% prooI strength at temperature min.
Standard Nmm
Nominal thickness 50C 00C 50C 00C 50C 00C 50C 00C 50C 500C
(N 00 00   mm   50    5 5  
(N 0 00
 mm t 0 mm  5 5  0 0  5 5 
Table    MoChemical composition
Cast analysis

Standard Si P S Al total N Cr Cu Ni
C Mn Mo
max. max. max. min. max. max. max. max.
% % %
% % % % % % % %

(N 00 00  0  00 0 00  00 00 000 )


00 00 00 0  0 00
(N 0 00
)
A Yalue may be agreed at the time oI enTuiry and order.
)
The Al content oI the cast shall be determined and giYen in the inspection document.

Вам также может понравиться