Академический Документы
Профессиональный Документы
Культура Документы
Level Probes
Types CLH
Flexible conductive level probe
1 to 5 electrodes
User defined electrode length
Isolated or unisolated electrodes
1 1/2 pipe thread according to ISO 228/1-G11/2A
Specifications
Probe Head Diameter 4 mm
Material PP (Polypropylen) Isolation CLE.K. Kynar (PVDF)
No of electrodes CLH3 3 CLE.P. Polyolefine (FR)
CLH5 5 Environment
Electrode connection M4 Overvoltage category III (IEC 60664)
Tightening torque 2.7 Nm by hand -K & -P Degree of protection
Cable connection Screw terminals Housing IP 65
Electrodes Electrode connections IP 68
Material Stainless steel Pollution degree 2(IEC 60664/60664A, 60947-1)
AISI316/DIN1.4401 Operating temperature -20 to +90C (-4 to +194F)
Length CLE1 1000 mm Storage temperature -40 to +100C (-40 to +212F)
CLE2 2000 mm Pressure 5 bar at 60C
Mode of Operation
Functionality - example Example not to damage the isolation
The diagram shows the level material of the isolated elec-
control system connected as trodes.
max. and min control, i.e. reg-
istration of 2 levels + 2 alarm Connection cable
levels. The relays react to the Control Probe 2, 3, 4 or 5 conductor PVC
Y4 Y2 Y5
low alternating current creat- Unit cable, normally screened.
LoLo
REF
HiHi
Y3 Y1
Lo
Hi
ed when the electrodes is in 12
24
Cable length: max. 100 m.
14
contact with the liquid. Pump on/off A1 Alarm on/off
The resistance between the
The reference (Ref) must be A2 cores and the ground must
connected to the container or 11 21 be at last 200k. In normal
if the container are made of a cases it is recommended to
nonconductive material, to an Power Supply use screened cable between
additional electrode. In the probe and controller, e.g.
diagram this electrode is where the cable is placed in
shown by the dotted line. to the desirable length. If and heat it with a heat gun. parallel to the load cables
using extended electrodes, Mount the electrodes in the (mains). The screen has to be
Electrodes place the enclosed isolation probehead by means of the connected to Y5 (reference).
Cut or extend the electrodes tube over the extension joint, M4 screw inserts. Take care
Dimensions Accessories
Extension joint 4 VD
M12 x 1.5 60 mm Kynar for isolation VDK
60 mm Polyolefine for isolation VDP
M12 Cable Gland M12 Cable Gland
M20 Cable Gland M20 Cable Gland
Delivery Contents
Probe Head
M20 Cable Gland
M12 Blind flange
Installation Instruction
M20 x 1.5