Академический Документы
Профессиональный Документы
Культура Документы
Title page
Alcatel-Lucent 9353
Wireless Management System | UA08.1
Activation of an Operator Configurable Split of IP Traffic over Hybrid Iub
9YZ-03450-3544-PGZZA
Issue 4 | January 2013
Alcatel-Lucent Proprietary
Use pursuant to applicable agreements
Use pursuant to applicable agreements
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2013 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Alcatel-Lucent Proprietary
Use pursuant to applicable agreements
Contents
Flexible operator configurable split of IP traffic over hybrid Iub ........................................................................... 2-2
2-2
3 Configuration details
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary iii
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Contents
....................................................................................................................................................................................................................................
Configuration prerequisites
Configuration impact
Configuration parameters
....................................................................................................................................................................................................................................
iv Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Contents
....................................................................................................................................................................................................................................
(Optional) Configuring I&C parameters using TIL ................................................................................................... 4-37
4-37
7 Maintenance procedures
Index
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary v
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
vi Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
List of tables
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary vii
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
viii Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
List of figures
4-4 Setting feature activation flag in the Iub wizard- Hybrid # 6 ................................................................. 4-13
4-5 Setting feature activation flag at BTSEquipment level- Hybrid # 6 ..................................................... 4-14
4-16 Changing the IP address and the subnet mask .............................................................................................. 4-39
4-17 Sending the I&C parameter changes to the iBTS ........................................................................................ 4-40
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary ix
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
x Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
About this document
About this document
Purpose
The purpose of this document is to describe the procedures for configuring split IP traffic
over hybrid Iub.
Note: This feature is supported for iBTS only.
In UA8.1 the activation of the split IP Iub feature over hybrid Iub is supported only for
the configuration scenarios listed in Configuration scenarios for split IP Iub support
(p. 4-3).
Activation of the split IP Iub feature for all other hybrid Iub scenarios is under restriction
in UA08.1
For more information, contact Alcatel-Lucent Customer Support team.
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary xi
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
About this document
....................................................................................................................................................................................................................................
119409, Possibility to lock the IP interface on Hybrid Iub, see Locking the IP interface
on hybrid Iub (p. 7-2).
Other changes:
Updated roadmap
Intended audience
The audience for this document is configuration management personnel.
Supported systems
This document applies to Alcatel-Lucent W-CDMA UA08.1 system release and the
following systems:
Alcatel-Lucent 939x NodeB (NodeB)
Alcatel-Lucent 9370 Radio Network Controller (RNC)
Alcatel-Lucent 7750 Service Router (SR)
Alcatel-Lucent 7710 Service Router (SR)
Alcatel-Lucent 9952 Wireless Provisioning System (WPS)
Alcatel-Lucent 9353 Wireless Management System (WMS)
Prerequisites
Before performing this procedure, ensure that you have the required knowledge of the
network, the configuration, and the provisioning principles.
Conventions used
Vocabulary conventions
Table 1, List of vocabulary conventions (p. xii) lists the generic terms used in this
document.
....................................................................................................................................................................................................................................
xii Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
About this document
....................................................................................................................................................................................................................................
Table 1 List of vocabulary conventions (continued)
Typographical conventions
Table 2, List of typographical conventions (p. xiii) lists the typographical conventions
used in this document.
Appearance Description
italicized text File and directory names
Emphasized information
graphical user interface text Text that is displayed in a graphical user interface or in
a hardware label
variable A value that the user supplies
key name The name of a key on the keyboard
command-syntax Command names that the user types
input text Text that the user types or selects as input to a system
output text Text that a system displays or prints
IP reference, reference number Related document that is referenced in the document
Related information
For information on subjects related to the content of this document, see the documents
listed in Table 3, List of related resources (p. xiii).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary xiii
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
About this document
....................................................................................................................................................................................................................................
Table 3 List of related resources (continued)
....................................................................................................................................................................................................................................
xiv Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
About this document
....................................................................................................................................................................................................................................
Table 3 List of related resources (continued)
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
1-888-582-3688 (for the United States)
1-630-224-2485 (for all other countries)
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com).
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary xv
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
xvi Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
1 1oadmap to Configuration
R
Management
documentation
Overview
Purpose
This chapter provides the roadmap for Configuration Management documentation.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 1-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Roadmap to Configuration Management documentation Roadmap to Configuration Management documentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
2 I2ntroduction to split IP
traffic over hybrid Iub
Overview
Purpose
The purpose of this chapter is to provide an overview of the split IP Iub feature in hybrid
Iub scenarios.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 2-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Introduction to split IP traffic over hybrid Iub Flexible operator configurable split of IP traffic over hybrid
Iub
....................................................................................................................................................................................................................................
Feature overview
Flexible operator configurable split Iub is an iBTS feature which allows support of
additional IP Iub traffic separation options apart from those available in the standard
hybrid Iub configuration.
These new configuration possibilities are referred to as either Evolved hybrid Iub or
Hybrid Iub Plus configurations. With this enhancement, IP in hybrid configurations can
carry OAM traffic and all PS UPlane traffic. Signaling (CPlane and SRB) and all CS
traffic remains on ATM.
In UA8.1, traffic may be separated into up to seven flows at the NodeB and five flows at
the RNC side according to a combination of the following three criteria:
Per traffic category (CPlane or UPlane or HSPA or R99)
Per quality of service (DSCP)
Per operator (in case of UTRAN sharing)
Note: Traffic can be separated at Layer 2 by use of different VLANs and at Layer 3
by use of different NodeB IP addresses. If traffic is separated at Layer 2, there is one
IP address and subnet associated with each VLAN.
....................................................................................................................................................................................................................................
2-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Introduction to split IP traffic over hybrid Iub Flexible operator configurable split of IP traffic over hybrid
Iub
....................................................................................................................................................................................................................................
Figure 2-1, Separation of UPlane traffic on hybrid with VLANs (p. 2-3) illustrates an
example where IP UPlane traffic is mapped into separate VLANs by DSCP.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 2-3
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Introduction to split IP traffic over hybrid Iub Flexible operator configurable split of IP traffic over hybrid
Iub
....................................................................................................................................................................................................................................
Figure 2-2, Virtual Interface and Ethernet Bandwidth Pools (p. 2-4) illustrates the
connection between VIs and EBPs.
....................................................................................................................................................................................................................................
2-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Introduction to split IP traffic over hybrid Iub Flexible operator configurable split of IP traffic over hybrid
Iub
....................................................................................................................................................................................................................................
A BP is a traffic management entity and can be configured, for example, to correspond to
the traffic of one operator in case of UTRAN sharing. There is a one-to-one
correspondence between an RNC BP and a NodeB EBP.
To support this behaviour, the following changes are made:
Enhanced Call Admission Control (CAC):
An option to choose either the IP flow with the most available bandwidth or the IP
flow being least used is added.
The CN Domain (PS or CS) is taken into account to map R99 PS calls, preferably
on IP.
Transport Map (Tm): An R99 PS RAB can be mapped on two BPs (ATM and IP or IP
and IP). However, IP is preferred for PS calls.
IP flow: An IP flow corresponds to a specific QoS of a traffic flow either at L2
(VLAN) or at L3 (IP address). RNC is configured with up to 16 IP flows per BP.
Note: For more details, see Native IP and Hybrid Iub in UA08 - Operational
Engineering Method, UMT/IRC/APP/035927.
Continuity check
An end-to-end continuity check is needed for each VI to ensure that the UPlane IP link
connectivity exists between RNC and iBTS.
Proprietary (UDP) heartbeat mechanism is used for the end-to-end continuity check in
evolved hybrid Iub scenario. This mechanism is used for each VI carrying UPlane traffic.
Continuity check initialization
In UA8.1, the NodeB ATTACH message is used for both hybrid and native IP Iub. The
message contains additional information communicating the VIs and IP addresses
configured on the BTS. In both standard hybrid and evolved hybrid Iub modes, ATTACH
messages are sent for each UPlane VI until the Heartbeat request is received in the
corresponding UPlane flow.
Note: ATTACH messages are sent with additional VI information even if split IP Iub
feature is not licensed or activated. So, the RNC no longer has to wait until the first IP
call to know the BTS IP address in standard hybrid Iub scenarios.
Loss of Continuity
When a loss of continuity is detected for a VI, all the IP flows mapped on the VI are taken
out of service.
The following actions are taken to bring the VI out of service:
RABs established on this VI are released.
New RAB is established on another available VI according to the TM configuration.
Proprietary (UDP) heartbeat alarm is raised.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 2-5
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Introduction to split IP traffic over hybrid Iub Flexible operator configurable split of IP traffic over hybrid
Iub
....................................................................................................................................................................................................................................
Configuration scope and restrictions
Flexible Operator Configurable Split IP Iub applies to Evolved split hybrid Iub with the
following scope and constraints:
Scope
OAM traffic may be either on IP or on ATM
PS UPlane may either be on IP or on ATM with preference on IP
Restrictions
CS User Plane must be on ATM
OAM traffic cannot be split across two different virtual interfaces (VIs)
Traffic can not be split across two different physical ports. Dual port split Iub
configurations are not supported.
Signaling must be on ATM: CPlane (NBAP message) and SRB (RRC message)
The maximum number of VLANs (VIs) is limited to seven.
The maximum number of UPlane VLANs (VIs) is limited to four.
The maximum number of EBPs is limited to seven.
Note: For evolved hybrid Iub configurations, up to five flows at the NodeB (one
OAM flow and up to four UPlane flows) and four flows at the RNC (up to four
UPlane flows, since OAM is not seen by the RNC) are allowed.
....................................................................................................................................................................................................................................
2-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
3 Configuration details
3
Overview
Purpose
The purpose of this chapter is to list the configuration requirements, tasks, impact, and
parameters.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Overview
Configuration prerequisites
....................................................................................................................................................................................................................................
Configuration prerequisites
Overview
Purpose
The purpose of this section is to list the hardware and software requirements and
pre-configuration checks.
Contents
....................................................................................................................................................................................................................................
3-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Hardware requirements
Configuration prerequisites
....................................................................................................................................................................................................................................
Hardware requirements
Overview
The split IP Iub option is supported only on iBTS equipped with x/e-CCM card variants.
Table 3-1, Supported hardware (p. 3-3) lists the supported variants of iBTS controller
cards with different MDA variants.
9370 iBTS
RNC Iub mode Port Controller xCCM(-U) eCCM-U
cards
MDA 4 GiGE 4 GiGE
board E1/T1 E1/T1
4p Standard Mother- Yes No Yes No
GigE hybrid Iub board port
card MDA port NA Yes NA Yes
Evolved Mother- Yes No Yes No
hybrid Iub board port
MDA port NA Yes NA Yes
Note: When x/eCCM module is equipped with a GigE MDA card, the Iub interface
must be configured on one of the GigE MDA ports as the Motherboard Fast Ethernet
port do not function when a GigE MDA is enabled.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-3
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Required access
Configuration prerequisites
....................................................................................................................................................................................................................................
Required access
Logins
For configuring and activating split IP Iub, ensure that you have access to the following
systems:
WPS
WMS
TIL
Note: Administrator privileges are required to perform activation tasks in WMS.
....................................................................................................................................................................................................................................
3-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Pre-configuration checks
Configuration prerequisites
....................................................................................................................................................................................................................................
Pre-configuration checks
Purpose
The purpose of this section is to list the checks that you need to perform to ensure that the
prerequisites for the configuration of split IP Iub support are met.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-5
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Overview
Configuration tasks and duration
....................................................................................................................................................................................................................................
Overview
Purpose
The purpose of this section is to list the tasks and the sequence in which the tasks need to
be performed for successful activation.
Contents
....................................................................................................................................................................................................................................
3-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Task sequence and estimated duration
Configuration tasks and duration
....................................................................................................................................................................................................................................
Activation tasks
Table 3-2, Task sequence (p. 3-7) lists the tasks to be performed in sequential order for
successful activation of split IP Iub.
Step Procedure
1 Configuring RNC
2 Configuring BTSEquipment
3 Exporting workorders
4 Performing pre-activation checks
5 Activating the workorder in WMS
6 Performing post-activation checks
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-7
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Overview
Configuration impact
....................................................................................................................................................................................................................................
Configuration impact
Overview
Purpose
The purpose of this section is to list the NEs impacted by the configuration of split IP Iub
support.
Contents
....................................................................................................................................................................................................................................
3-8 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Impacted network elements
Configuration impact
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-9
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Overview
Configuration parameters
....................................................................................................................................................................................................................................
Configuration parameters
Overview
Purpose
The purpose of this section is to list and describe the input parameters required for
configuring flexible split IP Iub.
Contents
....................................................................................................................................................................................................................................
3-10 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Parameter Description
Object: BTSEquipment
Status: Modified object
synchronizationMethodList Purpose: Defines the list of synchronization
methods listed as per the preference order of
the operators.
Value: Accepts enumerated data, for example
dedicatedE1T1.
Object: EthernetPort
Parent object: BTSEquipment
Status: Modified object
Object description: EthernetPort instance represents the physical port available in the CCM
board. This object specifies the maximum UL bandwidth that can be supported by this port.
ulBandwidth Purpose: Defines the UL bandwidth available
in the Ethernet port.
Value: Accepts integer within the range of
0..1000000, for example 50000.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-11
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-4 List of BTSEquipment parameters (continued)
Parameter Description
efmMode Value: Accepts enumerated data, for example
Active.
efmOamPduFrequencyRate Purpose: Frequency rate of the emission of
EFM OAM PDUs (PDUs per second)
Value: Accepts integer within the range of
1..10, for example 1.
efmRemLoopbackSupport Purpose: Determines if the remote DTE can
put this port into loopback mode.
Value: Accepts enumerated data, for example
false.
Object: IpRan
Parent object: BTSEquipment
Status: Modified object
dscpToPBit Purpose: Defines the mapping table from
DSCP (level 3) QoS class to p-bit to be used
by the NodeB for UL traffic on IP.
Value: Accepts structure of 8 elements
separated by ','., for example
0,0,1,3,5,6,7,7.
EpForArp Purpose: Defines the EP used by the NodeB
for ARP traffic for which it is not possible to
rely on DSCP value.
Value: Accepts integer within the range of
0..7, for example 5.
EpForNonIptrafficExceptArp Purpose: Defines the Emission Priority (EP)
used by the NodeB for all UL non-IP traffic
except ARP.
Value: Accepts integer within the range of
0..7, for example 5.
....................................................................................................................................................................................................................................
3-12 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-4 List of BTSEquipment parameters (continued)
Parameter Description
heartbeatTimer Purpose: Indicates the heartbeat mechanism
and timer for sending heartbeat request for
each VI carrying UP traffic from RNC. If the
NodeB does not receive any heartbeat request
message from RNC for such a VI during
heartbeatTimer, NodeB sends an alarm to the
OMC for loss of communication on that VI.
Value: Accepts integer within the range of
100..100000, for example 7700.
isFlexibleOperatorConfig- Purpose: Indicates if advanced IP QoS
urableSplitAllowed management is allowed through split IP Iub.
Value: Accepts enumerated data, for example
true.
pBitForArp Purpose: Defines the p-bit value used by the
NodeB for all ARP traffic for which it is not
possible to rely on DSCP value, since ARP is
not transported on IP.
Value: Accepts integer within the range of
0..7, for example 0.
pBitForNonIptrafficExceptArp Purpose: Defines the p-bit value to used by
the NodeB for all UL non-IP traffic.
Value: Accepts integer within the range of
0..7, for example 7.
Object: EthernetBandwidthPool
Parent object: IpRan
Status: New object
Object description: EthernetBandwidthPool gathers the VIs as a common pool for traffic
management for the traffic flow and includes common BW parameters to be used for the traffic
flow associated to the VIs pointing to it.
physicalPortId Purpose: Points to the EthernetPort object to
be used to transmit the traffic flow associated
to the respective EBP.
Value: Accepts the portID, for example
EthernetPort/0.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-13
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-4 List of BTSEquipment parameters (continued)
Parameter Description
epToCIR Purpose: Defines the Commited Information
Rate (CIR) per Emission Priority (EP).
The value of this parameter is measured as rate
at RNC side and percentage at BTS side.
Value: Accepts a structure of eight elements
separated by ',', for example
0,0,0,4,48,48,0,0.
epToCongestionEnd Purpose: Defines the mapping table from EP
to Congestion End Threshold used by the
NodeB for UL traffic on the EBP.
Value: Accepts a structure of eight elements
separated by ',', for example
0,60,0,70,70,70,70,70
epToCongestionStart Purpose: Defines the mapping table from EP
to Congestion Start Threshold used by the
NodeB for UL traffic on the EBP.
Value: Accepts a structure of eight elements
separated by ',', for example
0,80,0,90,90,90,90,90.
epToCBS Purpose: Defines the mapping table from EP
to Committed Burst Size (CBS) used by the
NodeB for UL traffic on the EBP.
Value: Accepts a structure of eight elements
separated by ',',, for example
1,1,1,1,10,100,0,0.
epToMBS Purpose: Defines the mapping table from EP
to Maximum Burst Size (MBS) used by the
NodeB for UL traffic on the EBP.
Value: Accepts a structure of eight elements
separated by ',',, for example
1,1,1,1,10,100,0,0.
epToPIR Purpose: Defines the Peak Information Rate
(PIR) per EP.
The value of this parameter is measured as rate
at RNC side and percentage at BTS side.
Value: Accepts a structure of eight elements
separated by ',', for example
0,0,0,10,100,100,0,0.
....................................................................................................................................................................................................................................
3-14 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-4 List of BTSEquipment parameters (continued)
Parameter Description
epToQueueSize Purpose: Defines the mapping table from EP
to Queue Size used by the NodeB for UL
traffic on the EBP.
Value: Accepts a structure of eight elements
separated by ',', for example
0,0,0,10,45,45,0,0.
committedInformationRate Purpose: Defines the UL Committed
Information Rate, UL bandwidth used by the
NodeB for UL traffic on IP per EBP.
The value of this parameter is measured as rate
at RNC side and percentage at BTS side.
Value: Accepts integers within the range of
0..100, for example 50.
peakInformationRate Purpose: Defines the Peak Information Rate
(PIR) used by the NodeB for UL traffic on IP
per EBP.
The value of this parameter is measured as rate
at RNC side and percentage at BTS side.
Value: Accepts integers within the range of
0..100, for example 100.
isDefaultEthernetBandwidthPool Purpose: Indicates whether this instance of
EthernetBandwidthPool is the default one.
Default value: true
Value: Accepts enumerated data, for example
true.
Object: IpTrafficShaping
Parent object: IpRan
Status: Modified object
dscpToEP Purpose: Defines the mapping table from
DSCP (level 3) QoS class to Emission Priority
(EP) to be used by the NodeB for UL traffic on
IP
Value: Accepts structure of 8 elements
separated by ',', for example
5,5,4,4,3,1,2,0.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-15
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-4 List of BTSEquipment parameters (continued)
Parameter Description
Object: VirtualInterface
Parent object: IpRan
Status: New object
Object description: VirtualInterface describes the common parameters associated to a
traffic flow, after separation of traffic. For example, the IP address and VLAN Id for PTP traffic.
An instance of VI can point to one Ethernet Bandwidth Pool only.
ethernetBandwidthPoolId Purpose: Points to the EBP object where the
traffic flow associated to the considered VI is
directed.
Value: Accepts the EBP ID, for example
EthernetBandwidthPool/0.
ipAddress Purpose: Indicates the IP address to be used,
if present at NodeB side for the traffic flow
associated to the respective VI.
Value: Accepts IPv4 address, for example
10.37.2.34.
subnetMask Purpose: Indicates subnet mask of the IP
address, if present for the traffic flow
associated to the respective VI.
Value: Accepts IPv4 address, for example
255.255.255.0.
typeOfTraffic Purpose: Describes the type of traffic
associated to the respective VI.
Value: Accepts enumerated data, for example
UP.
vlanId Purpose: Indicates the VLAN to be used, if
present at NodeB side for the traffic flow
associated to the respective VI.
Value: Accepts integer within the range of
0..4095, for example 23.
....................................................................................................................................................................................................................................
3-16 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-5, List of RNC parameters (p. 3-17) lists and describes the configuration
parameters required to be set or checked at RNC side for configuring split IP Iub feature.
Parameter Description
Object: IpIf
Parent object: casRoot (EM)
Status: Modified object
ipFlowSelectMethod Purpose: Specifies the ipFlow selection method on
IP link to be performed on this interface to indicate
load balancing schemes between bandwidth pools.
Value: Accepts enumerated data, for example
mostAvlBandwidth.
ipUmtsInterfaceList Purpose: Contains the list of links, each link
representing an Iub interface component attached
to this IpIf.
Value: Accepts list of links, for example Iub/37
IuUplane IpLk/1.
cacMethod Purpose: Specifies the type of call admission
control to be performed on this interface.
Value: Accepts enumerated data, for example
ipIf.
Object: BwPool
Parent object: IpIf
Status: Modified object
transportMap Purpose: Specifies a link reference to a valid
instance of RncIn TransportMap.
Value: Accepts the transport map ID, for example
RncIn Tm/22.
congestionManagement Purpose: Specifies a link reference to a valid
instance of RncIn CongestionManagement
component.
Value: Accepts the CM ID, for example RncIn
Cm/31
Object: IpFlow
Parent object: BwPool
Status: Modified object
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-17
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-5 List of RNC parameters (continued)
Parameter Description
nodebTransportVirtualInter- Purpose: specifies proprietary reference shared
faceRef between NodeB and RNC and signifies an instance
of the transport media on the NodeB side.
Value: Ensure that this parameter value is the same
at the NodeB and the RNC side.
Accepts integer within the range of 1..7, for
example 1.
downlinkCommittedRate Purpose: Specifies the down link committed rate.
Value: Accepts integer within the range of
0..1000000, for example 7000.
downlinkPeakRate Purpose: Specifies the down link peak rate.
Value: Accepts integer within the range of
0..1000000, for example 7000.
qos Purpose: Specifies quality of service. QoS must be
unique across the Bandwidth Pool.
Value: Accepts integer within the range of 0..3, for
example 2.
uplinkCommittedRate Purpose: Specifies the up link committed rate.
Value: Accepts integer within the range of
0..1000000, for example 7000.
uplinkPeakRate Purpose: Specifies the up link peak rate.
Value: Accepts integer within the range of
0..1000000, for example 7000.
Object: Cm
Parent object: RncIn
Status: Modified object
activation Purpose: Sets the level of congestion management
in the Aal2If or BwPool.
Value: Accepts enumerated data, for example
discardAndBackPressure.
bwPoolCellColor Purpose: Specifies whether Iub Aal2If downlink
usage should be included in the cell color
algorithm.
Value: Accepts enumerated data, for example
enabled.
....................................................................................................................................................................................................................................
3-18 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-5 List of RNC parameters (continued)
Parameter Description
bwPoolQosBackPressureThreshold Purpose: Specifies the thresholds (in percentages
of discard threshold) at which back pressure is
provided to the radio network layer for each of the
quality of service values.
Value: Accepts structure of 4 elements separated
by ',', for example 0,50,95,95.
bwPoolQosDiscardThreshold Purpose: Specifies the discard thresholds (in
percentages) for each of the quality of service
values. For Aal2If, the threshold applies to the sum
of ECR of all Aal2 paths with given quality of
service value (bandwidth reservation may modify
the base value).
Value: Accepts structure of 4 elements separated
by ',', for example 0,200,300,500.
commentText Purpose: Specifies an arbitrary string whose use is
left to the discretion of the system administrator.
Value: Accepts Ascii string with 0 to 60 characters.
This parameter is optional.
Object: Tm
Parent object: RncIn
Status: Modified object
commentText Purpose: Specifies an arbitrary string whose use is
left discretion of the system administrator.
Value: Accepts Ascii string with 0 to 60 characters,
for example ATM shared Tm with HSPA
Streaming Qos1.
interfaceType Purpose: Specifies the UTRAN interfaces to
which the TM applies.
Value: Accepts multi enumeration, for example
iub.
preference Purpose: This attribute is valid for IubIf only and
is used in cell color calculations.
Default value: Unset
Value: Accepts enumerated data, for example
sharedForAllTrafficTypes.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-19
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Table 3-5 List of RNC parameters (continued)
Parameter Description
Object: Tse
Parent object: Tm
Status: Modified object
arpLevel Purpose: Specifies Allocation or Retention
Priority Level as defined in 3GPP TS25.413.
Value: Accepts enumerated data, for example
ignore.
diffServCodePoint Purpose: Specifies differentiated services code
point of an IP transport bearer as defined in RFC
2474. This attribute is not used for ATM transport
bearers.
Value: Accepts enumerated data, for example
cs6X110000.
qos Purpose: Specifies the quality of service value for
the Aal2If Path, Aal2IF BwPool Path, or IpIf
BwPool IpFlow.
Value: Accepts integer within the range of 0..3, for
example 0.
rbSetQos Purpose: Specifies value for the Qualify of
Service as configured in the RBSetConf Managed
Object in the Cnode MIB.
Value: Accepts integer within the range of 0..3, for
example 0.
trafficClass Purpose: Specifies traffic class of a transport
bearer.
Value: Accepts enumerated data, for example
signalling.
trafficHandlingPriority Purpose: Specifies Traffic Handling Priority as
defined in 3GPP TS25.413.
Value: Accepts enumerated data, for example
ignore.
uplinkDownlinkPreference Purpose: Specifies the preference of the related
TM for the specific traffic type described with the
combination (trafficClass, rbSetQos, arpPl, thp).
Value: Accepts enumerated data, for example
noPreference.
....................................................................................................................................................................................................................................
3-20 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuration details Parameters for configuration
Configuration parameters
....................................................................................................................................................................................................................................
Note: For more information on the configuration parameters, see the following
documents:
NodeB parameters: Alcatel-Lucent 9353 Wireless Management System -
Parameters Reference Guide: Node B Parameters, NN-20500-027P4
RNC parameters: Alcatel-Lucent 9353 Wireless Management System - Parameters
Reference Guide: 9370 RNC I-Node Parameters, NN-20500-027P3
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 3-21
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuration details Parameters for configuration
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-22 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
4 4 onfiguring split IP on
C
hybrid Iub
Overview
Purpose
The purpose of this chapter is to provide procedural information to configure and activate
split IP traffic on hybrid Iub.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Overview
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Overview
Purpose
The purpose of this section is to provide the following information:
An overview of the supported configuration scenarios.
The procedural steps to perform the following tasks:
1. Configure hybrid Iub for split IP support.
2. Export workorder.
Contents
....................................................................................................................................................................................................................................
4-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuration scenarios for split IP Iub support
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Scenario 1 - Hybrid # 3
In this scenario, the traffic is split in the following way at the NodeB side:
CS R99 conversational, streaming, and Control Plane (CPlane) traffic over ATM
HSxPA, PS R99, and OAM traffic over single IP Path
RNC: In this scenario, one BP is linked to the corresponding EBP at the NodeB side.
NodeB: In this scenario, only one VI must be created containing both Uplane and OAM
traffic and linked to one EBP.
To configure split IP Iub for this scenario, perform the following tasks in order:
1. (Optional) Adding or configuring Transport Map (p. 4-5)
2. (Optional) Adding or configuring Congestion Management objects (p. 4-8)
3. Steps to set the feature activation flag (p. 4-12)
4. Steps to add additional UPlane streams (p. 4-15)
5. Steps to configure the UPlane streams (p. 4-17)
6. Steps to delete the ATM streams (p. 4-19)
7. Steps to configure Ethernet resources for the BTSEquipment (p. 4-25)
8. Steps to add or re-configure VIs and EBPs (p. 4-28)
9. (Optional) Steps to apply IPRan or IPTraffic shaping settings (p. 4-30)
10. (Optional) Applying Aal2 or Ipif settings (p. 4-22)
11. (Optional) Verifying BTS synchronization configuration (p. 4-34)
12. (Optional) Configuring I&C parameters using TIL (p. 4-37)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-3
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuration scenarios for split IP Iub support
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Scenario 2 - Hybrid # 6
In this scenario, the traffic is split in the following way at the NodeB side:
CS R99 conversational, streaming, and CPlane traffic over ATM
HSxPA, PS R99 traffic over the first IP Path
OAM traffic over the second IP Path
RNC: In this scenario, one BP is linked to the corresponding EBP at the NodeB side.
NodeB: In this scenario, two VIs must be created containing both Uplane and OAM
traffic, respectively, and linked to one EBP.
To configure split IP Iub for this scenario, perform the following tasks in order:
1. (Optional) Adding or configuring Transport Map (p. 4-5)
2. (Optional) Adding or configuring Congestion Management objects (p. 4-8)
3. Steps to set the feature activation flag (p. 4-12)
4. Steps to add additional UPlane streams (p. 4-15)
5. Steps to configure the UPlane streams (p. 4-17)
6. Steps to delete the ATM streams (p. 4-19)
7. Steps to configure Ethernet resources for the BTSEquipment (p. 4-25)
8. Steps to add or re-configure VIs and EBPs (p. 4-28)
9. (Optional) Steps to apply IPRan or IPTraffic shaping settings (p. 4-30)
10. (Optional) Steps to add, configure, or remove IP routes (p. 4-32)
11. (Optional) Applying Aal2 or Ipif settings (p. 4-22)
12. (Optional) Verifying BTS synchronization configuration (p. 4-34)
13. (Optional) Configuring I&C parameters using TIL (p. 4-37)
Note: All other procedures described in this chapter are optional. For more
information, see the respective procedure in this chapter.
....................................................................................................................................................................................................................................
4-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Transport Map
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
1 From the WPS Network tree, select the NodeB that you want to configure.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-5
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Transport Map
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-1, Adding Transport Map - Hybrid # 6 (p. 4-6) shows the Operation:
Configure Transport Map window.
...................................................................................................................................................................................................
8 Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
4-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Transport Map
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Steps to configure transport maps
Perform the following steps to configure transport maps:
...................................................................................................................................................................................................
1 From the WPS Network tree, panel, select the transport map object under
RNC/RNCEquipment/INode/RNCNAMEIN0/RncIn/Tm.
Expand the Tm object.
...................................................................................................................................................................................................
3 From the Object Editor: Edition, ensure that appropriate values are provided for the
following attributes:
arpLevel
diffServCodePoint
qos
rbSetQos
trafficClass
trafficHandlingPriority
uplinkDownlinkPreference
Result: Transport maps are created and configured.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-7
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Congestion Management
Configuring hybrid Iub for split IP support objects
....................................................................................................................................................................................................................................
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
Result: The Operation: Configure Congestion Management window appears.
...................................................................................................................................................................................................
5 Ensure that the appropriate template is selected, and then click OK.
Figure 4-2, Adding CM object - Hybrid # 6 (p. 4-9) shows the Operation: Configure
Congestion Management window.
....................................................................................................................................................................................................................................
4-8 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Congestion Management
Configuring hybrid Iub for split IP support objects
....................................................................................................................................................................................................................................
Result: CM is created.
E...................................................................................................................................................................................................
N D O F S T E P S
1 From the Network tree of the WPS main window, select the RNC.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-9
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Congestion Management
Configuring hybrid Iub for split IP support objects
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
4 Ensure that the appropriate values are defined for the following attributes:
activation
bwPoolCellColor
bwPoolQosBackPressureThreshold
bwPoolQosDiscardThreshold
commentText
....................................................................................................................................................................................................................................
4-10 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Adding or configuring Congestion Management
Configuring hybrid Iub for split IP support objects
....................................................................................................................................................................................................................................
Result: Appropriate settings are completed to enable CM for proper differentiation
and queueing of traffic.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-11
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Select the operation Add UPlane streams from the current status panel.
Result: The Operation: Add UPlane streams window appears.
...................................................................................................................................................................................................
5 Select the Is Flexible IP Iub Split Allowed check box to activate the flag setting for split
IP Iub feature.
....................................................................................................................................................................................................................................
4-12 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-4, Setting feature activation flag in the Iub wizard- Hybrid # 6
(p. 4-13) illustrates how to set activation flag.
Figure 4-4 Setting feature activation flag in the Iub wizard- Hybrid # 6
...................................................................................................................................................................................................
6 Click OK.
Result: The activation flag for split IP Iub support is set.
...................................................................................................................................................................................................
7 (Optional) Alternatively, you can also set the activation flag directly at the
BTSEquipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-13
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Perform the following steps to set the activation flag at the BTSEquipment level:
1. From the WPS main window, select the Network tab.
2. From the WPS network tree, select the BTSEquipment.
3. From the Object Editor: Overview tab, click Flags Setting.
Result: The Operation: Flags Setting window appears.
4. Select the Is Flexible IP Iub Split allowed check box in the BTSEquipment section to
configure split IP Iub support.
5. Click OK.
Figure 4-6, Adding UPlane streams - Hybrid # 6 (p. 4-16) shows the Operation: Add
UPlane streams window
....................................................................................................................................................................................................................................
4-14 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Select the operation Add UPlane streams from the current status panel.
Result: The Operation: Add UPlane streams window appears.
...................................................................................................................................................................................................
5 If required, select the appropriate number of Ip streams to add the additional number of
UPlane streams.
Ensure that Is Flexible IP Iub Split Allowed check box is enabled.
Note: For configuration scenario 1 and 2, one IP flow for QOS 2 (PS R99) must be
added.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-15
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-6, Adding UPlane streams - Hybrid # 6 (p. 4-16) shows the Operation: Add
UPlane streams window.
....................................................................................................................................................................................................................................
4-16 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 In the IpFlow section, ensure that appropriate values are set for the following attributes:
Transport Virtual Interface
Qos
IpFlow Template
Result: The BPs are mapped with the respective VIs.
...................................................................................................................................................................................................
7 Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Select the operation Configure Uplane Streams from the current status panel.
Result: The Operation: Configure Uplane Streams window appears.
...................................................................................................................................................................................................
5 In the Aal2 Bearer section, ensure that the appropriate values are set for the following
parameters:
BandwidthPool
Congestion Link
Transport Map
Note: Ensure that you make appropriate changes if required; for example, a new
transport map.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-17
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 In the Ip flow section, select the appropriate value for the following parameters:
Bandwidth Pool
Bwp template
Congestion Link
Transport Map
IpFlow Template
Ensure that the appropriate values are set for Transport Virtual Interface and Qos.
Figure 4-7, Configuring User Plane streams - Hybrid # 6 (p. 4-18) shows the
Operation: Configure Uplane Streams window.
Result: Each BP is linked to the appropriate Transport Map. Each IpFlow defined on
the RNC is mapped to the appropriate BTS VI id.
...................................................................................................................................................................................................
7 Click OK.
....................................................................................................................................................................................................................................
4-18 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Note: Ensure that UPlane streams are added, before you perform this procedure.
E...................................................................................................................................................................................................
N D O F S T E P S
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Select the operation Delete Streams from the current status panel.
Result: The Operation: Delete Streams window appears.
...................................................................................................................................................................................................
5 In the Select streams to delete section, select the check boxes of ATM streams under
the Remove column to delete.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-19
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-8, Deleting ATM streams - Hybrid # 6 (p. 4-20) shows the Operation:
Configure Uplane Streams window.
....................................................................................................................................................................................................................................
4-20 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring RNC streams
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 Click OK.
Result: The selected ATM streams are deleted.
Note: Ensure that you remove the ATM OAM stream if OAM is migrating to IP.
In general, ALU recommends keeping all ATM UPlane streams unchanged, unless
there is a requirement to explicitly remove the ATM fallback paths for traffic
primarily routed to IP.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-21
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Applying Aal2 or Ipif settings
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the Streams Definition task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Click Configure Call Admission Control from the Current status panel.
....................................................................................................................................................................................................................................
4-22 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Applying Aal2 or Ipif settings
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Result: The Operation: Configure Call Admission Control streams window appears.
Figure 4-9, Applying Aal2 or Ipif settings - Hybrid # 6 (p. 4-23) shows the
Operation: Configure Call Admission Control window.
...................................................................................................................................................................................................
5 In the Aal2if configuration section, ensure that the appropriate values are defined for the
following attributes:
Aal2if Cac Method
Aal2 Template
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-23
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Applying Aal2 or Ipif settings
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 In the IpIf configuration section, ensure that the appropriate values are defined for the
following attributes:
IpIf Cac Method
IpIf Template
...................................................................................................................................................................................................
7 Click OK.
...................................................................................................................................................................................................
8 From the Network tree of the WPS main window, select the RNC.
...................................................................................................................................................................................................
10 From the Object Editor: Edition panel, ensure that appropriate values are set for the
following attributes:
pathSelectMethod
ipUmtsInterfaceList
...................................................................................................................................................................................................
12 From the Object editor: Edition panel, ensure that appropriate values are set for the
following attributes:
ipFlowSelectMethod
ipUmtsInterfaceList
Result: Appropriate Aal2 and IpIf settings are applied to reserve bandwidth for each
QOS for CAC.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
4-24 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Mapping EBPs to physical ports
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
5 In Ethernet port section, select the appropriate check boxes or values for the following
parameters:
Ethernet port
EthernetPort Template
EthernetBandwidthPool/<id> used
Default EthernetBandwidthPool
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-25
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Mapping EBPs to physical ports
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-10, Configuring Ethernet resources - Hybrid # 6 (p. 4-26) shows the
Operation: Configure Ethernet resource for BTSEquipment window.
Note: In UA8.1, all EBPs must be selected under the same EP, since dual port split
Iub configurations are not supported.
...................................................................................................................................................................................................
6 Click OK.
Result: EBPs are mapped to the appropriate physical port.
...................................................................................................................................................................................................
10 Ensure that appropriate values are set for the following attributes:
efmMode
efmOamPduFrequencyRate
efmRemLoopbackSupport
ulBandwidth
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-27
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring BTSEquipment IP parameters
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the BTS IP configuration task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Click Configure Vlan IP subnet for BTSEquipment from the Current status panel.
Result: The Operation: Configure Vlan IP subnet for BTSEquipment window
appears.
...................................................................................................................................................................................................
5 To use any Iub rules template, select the template from the Network Design drop-down
menu, and click Apply.
...................................................................................................................................................................................................
6 To add a VI and map specific type of traffic, click Add new subnet.
Note: Adding of one VI is applicable only for configuration scenario 2 - Hybrid # 6,
as UPlane traffic is split in two VIs. Scenario 1 uses the single default VI.
....................................................................................................................................................................................................................................
4-28 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring BTSEquipment IP parameters
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
7 For each VI, ensure that you define appropriate values for the following parameters, as
per the required configuration:
EthernetBandwidthPool instance:
EthernetBandwidthPool template: To set the traffic management characteristics of
the Ethernet bandwidth pool
Type of traffic: To map specific traffic type to a specific VI. For example, UP, CP,
and OAM.
IP address
subnetMask: To specify the subnet mask of the IP address set.
Note: IP address and subnetMask values are required to be set for VIs that do not
carry OAM traffic.
Vlan Id
Ensure that the appropriate BwPool/<id> IpFlow/<id>s for VIs carrying UPlane traffic is
selected.
Note: For the VI carrying OAM traffic, the VLAN Id and the IP address values are
ignored by the iBTS as commissioned values configured through TIL are used.
If required, use TIL to change OAM IP address or Subnet mask while the
configuration workorders are exported. For more details, see (Optional) Configuring
I&C parameters using TIL (p. 4-37)
The maximum number of Vis for CPlane traffic is 0 for hybrid and evolved hybrid
configurations; that is, the mapping of CP traffic to an IP traffic flow in any hybrid
Iub configuration is not supported.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-29
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring BTSEquipment IP parameters
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-11, Configuring Vlan IP subnets - Hybrid # 6 (p. 4-30) shows the Operation:
Configure Vlan IP subnet for BTSEquipment window
...................................................................................................................................................................................................
8 Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the BTS IP configuration task from the Iub wizard task tree.
....................................................................................................................................................................................................................................
4-30 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring BTSEquipment IP parameters
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-31
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring BTSEquipment IP parameters
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the BTS IP configuration task from the Iub wizard task tree.
...................................................................................................................................................................................................
4 Click Define IP route AND GW for BTSEquipment from the Current status panel.
Result: The Operation: Define IP route AND GW for BTSEquipment window
appears.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-32 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Configuring BTSEquipment IP parameters
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-13, Configuring the IP routes - Hybrid # 6 (p. 4-33) shows the Operation:
Define IP route AND GW for BTSEquipment window.
...................................................................................................................................................................................................
6 Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-33
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Verifying BTS synchronization configuration
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
1 From the Network tree of the WPS main window, select the NodeB.
...................................................................................................................................................................................................
2 Select the Iub wizard from the Object Editor: Overview panel.
Result: The Iub wizard window appears.
...................................................................................................................................................................................................
3 Select the BTS Synchronisation Configuration task from the Iub wizard task tree.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-34 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Verifying BTS synchronization configuration
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-14, Configuring the BTS Synchronization - Hybrid # 6 (p. 4-35) shows the
Operation: Configure BtsEquipment Synchronization window.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-35
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Verifying BTS synchronization configuration
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
4-36 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Configuring I&C parameters using TIL
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
2 From the main menu, click I&C > Change I&C parameters.
Result: The Display I&C parameters window appears.
...................................................................................................................................................................................................
3 To change the type of incoming link, on the BACKHAUL tab, change the Type of
Incoming Link to Fast Ethernet or Gigabit Ethernet, as appropriate for the BTS
hardware.
Note: Use this step if OAM traffic is moving from ATM to IP.
...................................................................................................................................................................................................
4 To change the EP used for the Iub IF, on the ETHERNET tab, select the appropriate value
for Eth Port used for iub IF parameter, if GigE MDA is selected
...................................................................................................................................................................................................
5 Ensure that VLAN TAGGING option is enabled on the ETHERNET tab, if applicable.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-37
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Configuring I&C parameters using TIL
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-15, Changing the VLan ID (p. 4-38) shows the Ethernet parameters.
....................................................................................................................................................................................................................................
4-38 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Configuring I&C parameters using TIL
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Figure 4-16, Changing the IP address and the subnet mask (p. 4-39) shows the IP
Parameters.
Enter the appropriate values for the BTS IP address and the Sub-network mask
parameters.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-39
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub (Optional) Configuring I&C parameters using TIL
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Result: A dialog box indicating that the message has been successfully sent and that
the new I&C parameters will be activated at the next reset.
Figure 4-17, Sending the I&C parameter changes to the iBTS (p. 4-40) shows the
Changing I&C parameters result window.
Note: Ensure that the TIL changes have been successfully sent to the iBTS before
proceeding with the next steps to export the workorder and activate the
configuration changes.
Do not use the TIL tool to reset the iBTS.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
4-40 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Exporting the workorder
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
Steps
Perform the following steps to export workorders:
...................................................................................................................................................................................................
2 Select an option to save the workspace. If required, enter a new workspace name, and
click Run.
...................................................................................................................................................................................................
5 Right-click on the selected workorder and select Export workorder from the contextual
menu.
To export the workorder to a local directory, select the on local file system option.
To export the workorder to a live server repository, select on live server repository
option.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-41
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Exporting the workorder
Configuring hybrid Iub for split IP support
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-42 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Overview
Activating the workorder
....................................................................................................................................................................................................................................
Overview
Purpose
The purpose of this section is to provide step-by-step instructions for running
pre-activation checks and activating workorders.
Contents
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-43
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Performing pre-activation checks
Activating the workorder
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-44 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Activating the workorder
Activating the workorder
....................................................................................................................................................................................................................................
Steps
Perform the following steps to activate a workorder in WMS:
...................................................................................................................................................................................................
1 From the WMS menu bar, select Configuration -> Sessions Manager.
Result: The Sessions Manager window appears.
...................................................................................................................................................................................................
2 From the Sessions Manager window, select any of the following options:
In Session Tasks panel, click Create new session, or
In Available Sessions panel, right-click Sessions list and select New.
Result: The Create Session window appears.
...................................................................................................................................................................................................
8 If OAM configuration changes are pending in TIL, ensure that the BTSEquipment
changes Activation Type is CRITICAL and will result in BTS reset.
...................................................................................................................................................................................................
10 Click Launch.
...................................................................................................................................................................................................
13 (Optional) If OAM traffic is on ATM or on IP, select the workorder and all the impacted
I-Nodes and BTS nodes, and click Launch.
Ensure the status is successful and progress is 100%.
Result: The modified configuration is activated on both the RNC and BTSEquipment.
...................................................................................................................................................................................................
14 (Optional) If OAM traffic is moving to IP, select the impacted BTS nodes, and click
Launch.
....................................................................................................................................................................................................................................
4-46 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Configuring split IP on hybrid Iub Activating the workorder
Activating the workorder
....................................................................................................................................................................................................................................
Ensure that the status is successful and progress is 100%.
Then select all the impacted I-Nodes and click Launch.
Ensure that the status is successful and progress is 100%.
Result: The modified configuration is activated on both the RNC and BTSEquipment.
...................................................................................................................................................................................................
15 To check that all the impacted nodes are in the Activated state, click Summary for
<session name>.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 4-47
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Configuring split IP on hybrid Iub Activating the workorder
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-48 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
5 Verifying the configuration
5
Overview
Purpose
The purpose of this chapter is to describe the checks to be performed in the
post-configuration phase.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 5-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Verifying the configuration Performing post-activation checks
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
5-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
6 6estoring the initial
R
settings
Overview
Purpose
The purpose of this chapter is to describe the procedure to restore the initial settings.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 6-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Restoring the initial settings Activating reverse workorder
....................................................................................................................................................................................................................................
1 From the WMS menu bar, select Configuration -> Sessions Manager.
Result: The Sessions Manager window appears.
...................................................................................................................................................................................................
2 From the Sessions Manager window, select any of the following options:
In the Session Tasks panel, click Create new session.
In Available Sessions panel, right-click Sessions list and select New.
Result: The Create Session window appears.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
6-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Restoring the initial settings Activating reverse workorder
....................................................................................................................................................................................................................................
Result: The Excluded Nodes panel on the Create Session window appears.
...................................................................................................................................................................................................
8 After the session is created without any errors, click Validation in the Actions for
<reverse session name> panel.
...................................................................................................................................................................................................
9 Click Launch.
...................................................................................................................................................................................................
13 Perform the following actions to check the validation report for each node in the summary
section:
Click Summary for <reverse session name>.
Ensure that the impacted nodes are in the Excluded state.
Ensure that the NodesBs are removed.
...................................................................................................................................................................................................
14 After the validation is completed without any errors, if the I-Nodes are not listed in the
summary, go to Step 15. Otherwise, perform the following actions:
In the Actions for <reverse session name> panel, click Activation.
Select all the impacted nodes, and then click Launch.
Click Summary for <reverse session name> and ensure that all the impacted nodes
are in the Activated state.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 6-3
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Restoring the initial settings Activating reverse workorder
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
15 After the changed NEs are validated without errors, click Activation in the Actions for
<reverse session name> panel, and perform the following actions:
Select all the impacted RNCs and click Launch.
When all tasks are completed, click Summary for <reverse session name> to ensure
that the impacted RNCs are in the Activated state.
...................................................................................................................................................................................................
16 From the Sessions Manager window, right-click on the Session List, and select
Terminate.
E...................................................................................................................................................................................................
N D O F S T E P S
Troubleshooting
Table 6-1, Reverse workorder activation (p. 6-4) describes the troubleshooting actions
to perform, in case of failed operations.
....................................................................................................................................................................................................................................
6-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Restoring the initial settings Activating reverse workorder
....................................................................................................................................................................................................................................
Table 6-1 Reverse workorder activation (continued)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 6-5
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Restoring the initial settings Activating reverse workorder
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
6-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
7 Maintenance procedures
7
Overview
Purpose
The purpose of this chapter is to explain the maintenance or troubleshooting related
procedures, applicable to an Evolved hybrid Iub configuration.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 7-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Maintenance procedures Overview
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
Overview
Purpose
The purpose of this section is to provide information on the following topics:
An overview of the locking of IP interface feature.
Procedural steps to lock and unlock the IP interface.
Contents
....................................................................................................................................................................................................................................
7-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Maintenance procedures Possibility to lock the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 7-3
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
4 Right click RNC to which the NodeB is parented and click Equipment Monitor.
Result: The Equipment Monitor window appears displaying the network tree.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 7-5
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
Figure 7-2, Supervising command status (p. 7-6) shows the Command Manager
window.
....................................................................................................................................................................................................................................
7-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
To unlock Hybrid Iub IP BP
Perform the following steps to unlock the
...................................................................................................................................................................................................
4 Right click RNC to which the NodeB is parented and click Equipment Monitor.
Result: The Equipment Monitor window appears displaying the network tree.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 7-7
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
Result: Set Administrative State Action Window appears.
Figure 7-3, Unlocking IP (p. 7-8) shows the Set Administrative State Action
Window.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-8 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
Locking the IP interface on hybrid Iub
....................................................................................................................................................................................................................................
Figure 7-4, Supervising command status (p. 7-9) shows the Command Manager
window.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary 7-9
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Maintenance procedures Locking the IP interface on Hybrid Iub
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-10 Alcatel-Lucent Proprietary Alcatel-Lucent 9353 WMS
Use pursuant to applicable agreements 9YZ-03450-3544-PGZZA UA08.1
Issue 4 January 2013
Index
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS Alcatel-Lucent Proprietary IN-1
9YZ-03450-3544-PGZZA UA08.1 Use pursuant to applicable agreements
Issue 4 January 2013
Index
....................................................................................................................................................................................................................................
................................................................................................
P post-configuration, 5-1
S stream
configure, 4-12
supported systems, xii
................................................................................................
technical support, xv
transport map
configure, 4-5
troubleshoot reverse workorder activation, 6-4
................................................................................................
V verification, 5-1
Vlan IP subnet
configuring, 4-28
................................................................................................
W WMS