Академический Документы
Профессиональный Документы
Культура Документы
Declaration of
Performance
Ralf Podleschny
Construction Product Regulation
New:
Certification of the
product
Certification of the
Factory Production
Control
Slide 2
Construction Product Regulation
Systems of Assessment and Verification of Constancy of Performance
Systems
Tasks
1+ 1 2+ 2 3 4
Initial Type Testing of the product
Determination of the product-type on the basis of
Manufacturer
the product
Audit-testing of samples taken before placing the
product on the market
Initial inspection of the manufacturing plant and of
factory production control
Continuous surveillance, assessment and
evaluation of factory production control
Slide 3
Construction Product Regulation
General Information:
1 Superior goals:
2
3
4 Reduction of trade barriers
5 Free market
6 Placing construction products
on the market
Slide 4
Construction Product Regulation
General Information:
Content of CPR:
CE-marking and
Declaration of Performance (DoP)
Mechanical
Declaration resistance andDeclaration
of Conformity stability of Performance (DoP)
Approvalin
NationalSafety case of fire
Bodies Technical Assessment Bodies (TAB)
Hygiene,
EOTA health and the environment
Organization of TABs
Significance of CE-marking
As of today the manufacturer has to document by the CE-Mark
Manufacturer
that he takes the
responsibility for the
conformity of the product with
the declared performance
(DoP)
Slide 7
Construction Product Regulation
Manufacturer
Authorised representative
Importer
Distributor
Slide 8
Construction Product Regulation
Slide 9
Construction Product Regulation
Slide 10
Construction Product Regulation
Tasks for those responsible for placing the product on the market:
Slide 11
Construction Product Regulation
Tasks for those responsible for placing the product on the market:
If mandatory:
Execution of external inspection and surveillance in each plant based on the
requirements of the harmonized specification (EN or ETA)
4 --- ---
acc. to Annex V
Slide 12
Construction Product Regulation
Notified bodies shall inform the notifying authority of the following (Art. 53.1)
e.g.:
Slide 13
Construction Product Regulation
Such performances have to be declared which are mandatory in the state where
the product is placed on the market
national specialties
The responsible for placing the product on the market has to declare the
performance of at least 1 essential characteristic.
Slide 14
Construction Product Regulation
CE-mark and DoP always belong together
Declaration of Performance
Reference number: AB-123456
(equal for DoP and CE marking)
Reference number: AB-123456 7 The notified body NB 4711 has done the initial type testing of Manufacturer's declaration on the implementation of
4 the product according to system 3 and issued a report to the the initial type testing and the factory production
(equal for DoP and CE marking) initial type testing of the product. control.
9 Declared Performance
6 self-supporting wall covering Harmonised technical
Essential requirement Performance
specification
x,xx mm, class 1-3
7 corrugated profile made of aluminium (alloy) Thickness
acc. EN 508-2:2008
EN 14782:2006
Type: XYZ
Size tolerances complied acc. EN 508-2:2008 EN 14782:2006
8 Free from holes.
Water permeability EN 14782:2006
Visual check passed.
Thickness x,xx mm, class 1-3
Thermal expansion coefficient:
Dimensional change -6 -1 EN 14782:2006
organic coating: Aluminium: 2410 K
Side A: XX m, type Dangerous substances NPD EN 14782:2006
Side B: YY m, type A1 to F
1
Reaction to fire EN 14782:2006
Durability Hint: At steel, details to the acc. EN 13501-1:2007
corrosion protection system organic coating:
Side A: XX m
as appropriate: corrosivity resistance class RC 2 or Side B: YY m
better Hint: At steel, details to the
Durability EN 14782:2006
corrosion protection system
Reaction to fire A1 to F or NPD as appropriate: corrosivity resistance
class RC 2 or better
acc. EN ISO 12944-2:1998
Related DoP:
www.homepage.de/dop The performance of the product in accordance with point 1 and 2 corresponds to the declared performance in point 9.
10
Type or Reference number: Responsible for creating this declaration of performance is only the manufacturer referred to in point 4 (or 5).
Signed on behalf of the manufacturer and in the name of the manufacturer by:
XYZ or AB-123456
(name and function)
1
Slide 15
Construction products according class F shall not be used in Germany; class E is at least required.
Construction Product Regulation
CE-mark and DoP always belong together
1 0815
(number(s) of notified bodies)
2 Any Co
12345 Any City
or his authorized representative in the EU
Reference number the
3 13 same for DoP and
4 Reference number: AB-123456 CE-mark
(equal for DoP and CE marking)
5 EN 14782:2006
Related DoP:
www.homepage.de/dop
Type or Reference number:
XYZ or AB-123456 Slide 16
Construction Product Regulation
CE-mark and DoP always belong together
Declaration of Performance
Reference number: AB-123456
Reference number
the same for
(equal for DoP and CE marking)
4 Any Co
12345 Any City
6 System 3 System 4
7 The notified body NB 4711 has done the initial type testing of Manufacturer's declaration on the implementation of
the product according to system 3 and issued a report to the the initial type testing and the factory production
initial type testing of the product. control.
8 Not relevant
List of essential characteristics
9 Declared Performance
Harmonised technical
acc. to the harmonized standard,
and their declared performances
Essential requirement Performance
specification
x,xx mm, class 1-3
Thickness EN 14782:2006
acc. EN 508-2:2008
DoP
DoP
DoP
This promotes:
Strengthening of reliability
One voice
Slide 19
Construction Product Regulation
Notice to distributors:
Slide 20
Construction Product Regulation
Notice to distributors:
Acting as a manufacturer:
Slide 21
Construction Product Regulation
DoP and publications of the manufacturers must not contain any contradictory
information concerning the performances of a product
Where the product presents a risk, manufacturers shall immediately inform the
competent national authorities of the Member States (Art. 11,7)
Slide 23
Construction Product Regulation
Checking of CE marking
Distributor
acts as a manufacturer where he places a product on
the market under his name or trademark or modifies a
construction product already placed on the market in
such a way that conformity with the declaration of
performance may be affected (Art. 15).
Slide 24
Construction Product Regulation
The importer:
shall place on the market only construction products which are
compliant with the applicable requirements of the CPR
Importer
acts as a manufacturer where he places a product on
the market under his name or trademark or modifies a
construction product already placed on the market in
such a way that conformity with the declaration of
performance may be affected (Art. 15).
Slide 25
Construction Product Regulation
Communication with the person who places the products on the market
Slide 26
Construction Product Regulation
has to compare the DoP with the performance required by the design
Slide 27
Construction Product Regulation
Slide 28
Construction Product Regulation
Slide 29
Construction Product Regulation
Market Surveillance
Imposition of fines
Slide 31
Construction Product Regulation
Art. 7.3
Slide 32
Further information
Slide 33
Latest information on standardization
Sandwich panels
Slide 34
Profiled sheets and linear profiles
Mandat e 120 Mandate 121 Mandate 122
INTERNAL and EXTERNAL WALL ROOF COVERINGS, and
STRUCTURAL METALLIC CEILING FINISHES ROOFLIGHTS, ROOF
PRODUCTS WINDOWS and ANCILLARY PRODUCTS
Execution of steel structures and Self-supporting metal sheet for roofing, Fully supported metal sheet and
aluminium structures external cladding and internal lining strip for roofing, external cladding
Requirements for conformity and internal lining
assessment of structural
components
CE-Mark based on AVCP:
CE-Mark based on AVCP Fire : System 3 oder 4
For all characteristics: Dangerous Substances: System 3
System 2+ Mechanical etc.: System 4
Slide 35
Profiled sheets and linear profiles
EN1090
Execution of steel structures and aluminium structures
EN 1090-1 CE-Marking (harmonized part)
EN 1090-2 Technical requirements for steel structures
EN 1090-3 Technical requirements for aluminium structures
Execution acc. to EN 1090-2 or EN 1090-3 National regulation for external quality control
Slide 36
Sandwich Panels
Sandwich Panels
CE
Today
Slide 37
Sandwich Panels
Sandwich Panels
Self-supporting double skin metal Double skin metal faced insulating panels
faced insulating panels for structural applications
CE
Future
Slide 38
Thank you for your attention!
Slide 39