Академический Документы
Профессиональный Документы
Культура Документы
Chapter 1.
Introduction
1-1
Chapter 1
Mainboard Specification
CPU
! Supports dual Intel Pentium III (FC-PGA/FC-PGA2) processor
! Supports 233MHz, 266MHz, 300MHz, 333MHz, 350MHz, 400MHz,
450MHz, 500MHZ, 533MHz, 667MHz, 700MHz, 733MHz, up to 1.13GHz
Chipset
! VIA 694X chipset (510 BGA)
- P-III FSB @133MHz
- AGP 4X and PCI plus Advanced ECC Memory Controller
- Supports PC100/133 SDRAM & VCM technology
! VIA VT82C686B chipset (352 BGA)
- Advanced Power Management Features
- Dual bus Master IDE Ultra DMA 33/66/100
! 1394 PHY Controller (optional)
- TI TSB41LV02 PHY Digital-to-Analog Transceiver
- Support up to Two 1394/1394A v 2.0 Compatible Data Channels
! 1394 Link Layer Controller (optional)
- TI TSB12LV26 1394 Link Layer Host Controller
- IEEE 1394, 1394 OHCI v1.0 & 1394A v2.0 compatible
- Supports 100/200/400 Mbps High Throughput
- 3.3V & 5V Operation for PCI-to-1394 Interface
Clock Generator
! 66.6MHz, 100MHz and 133MHz clocks are supported.
Main Memory
! Supports eight memory banks using four 168-pin unbuffered DIMM
! Supports a maximum memory size of 2GB
- Pin outs support 8 banks up to 2GB DRAM (256MB DRAM
Technology) at 100MHz. However, it is recommended to install a limit of
3 DIMMS or 6 banks at 133MHz for 1.5GB maximum memory.
! Supports ECC (1-bit Error Code Correct) function
! Supports 3.3V SDRAM DIMM
Slots
! One AGP 4X (Accelerated Graphics Port) slot
1-2
Introduction
On-Board IDE
! An IDE controller on the VIA VT82C686B chipset provides IDE HDD/
CD-ROM with PIO, Bus Master and Ultra DMA 66/100 operation modes.
! Can connect up to four IDE devices
On-Board Peripherals
! On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial ports (COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (2 Rear Connectors/ 2 from USB Front Pin Header -- one of
the ports supports USB PC to PC Networking function)
- 1 IrDA/HP connector for HPSIR
BIOS
! The mainboard BIOS provides Plug & Play BIOS which detects the
peripheral devices and expansion cards of the board automatically.
! The mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
Dimension
! ATX Form Factor: 25.4cm (W) x 30.4cm (L)
Mounting
! 9 mounting holes
1-3
Chapter 1
Mainboard Layout
Top : mouse
Bottom:
keyboard
Power Supply
ATX
CPUFAN1
USB
CPUFAN2
Ports
SOCKET 370
CPU 2
IDE 4 (ATA100-2)
IDE 3 (ATA100-1)
Top :
Parallel Port
SOCKET 370
Bottom:
COM A
COM B
DIMM 1
DIMM 2
DIMM 3
DIMM 4
J6
CPU 1 81)
D-LED $'":,2
JP1
JRMS1
AGP Slot
Promise
20265R
J11 (Optional)
(Optional) PCI Slot 1
FDD1
J12 (Optional)
PCI Slot 2
1394 PHY
Controller
(Optional)
PCI Slot 3
SYSFAN
IDE 2
IDE 1
VT82C
1394 Link
PCI Slot 4 686B JGS1
Layer
Controller
(Optional) JWOL1
JBAT1
PCI Slot 5
JFP1
J3
BIOS
BATT JGL1
CNR USB2
JMDM1
1-4
Introduction
1-5
Chapter 1
Key Features
1-6
Introduction
T.O.P Tech
The T.O.P TechTM is a extended sensing device that can 100% accu-
rately detect the CPUs temeprature. You can find out the temperature on BIOS
setup menu. The PC AlertTM also provides the information.
1-7
Chapter 1
PC Alert III
The PC AlertTM III is an utility you can find in the CD-ROM disk. The
utility is just like your PC doctor that can detect the following PC hardware
status during real time operation:
* monitor CPU & system temperatures
* monitor fan speed(s)
* monitor system voltage
* monitor chassis intrusion
If one of the items above is abnormal, the program main screen will be immedi-
ately shown on the screen, with the abnormal item highlighted in red. This will
continue to be shown,until user disables the warning.
Note: Items shown on PC Alert III vary depending on your systems status.
1-8
Introduction
Features:
! Network Management
- Monitoring & remote control
! Basic System Utilities
- Scandisk & Defragment to maintain your HDD
! 3D Graphics Design
- Enables a more friendly user interface
! Sofware Utilities
- SoftCooler Optimized Cooling
1-9
Chapter 1
Red Green
Initializing Keyboard Controller.
Testing VGA BIOS
1-10
Introduction
Initializing Video Interface
BIOS Sign On
Initializing Hard Drive Controller
Boot Attempt
- This will set low stack and boot via INT 19h.
1-11