Академический Документы
Профессиональный Документы
Культура Документы
17
Suggested real-time sea level stations
(India)
|18
Surface Currents (India)
|19
Disaster Information
Disaster Information
Earth Quake Early Warning
T Sunami Warning Systems
We always think about Safety of Each Life
Everybody Monitor for Human Safety
External/Internal Surge Source
Fire Accident in Solar PV Power Plant
Reason Lose Contact Earthing Disorder and Lightning
Sikhana to Padega Hi Follow NBC2016
Earthing and Protection
Surge in Systems and Result
Surge in DC Application
LIGHTNING FORMATION
Facts about Lightning
A strike can average 100 million volts of electricity
Current of up to 200,000 amperes
Can generate 54,000 oF
10/350MicroSec/50KA Fault Current/Discharge in
Nano Sec
Protection
Earthing Design100KA Fault Current/Joints Exothermic
/Flexible Down Conductor with Shortest Route &
Less Corner
Lightning Protection Standard use in India
(IS2309 Now IEC 62305-5)NBC2016
Working Principle Angullar No Compromise with Design
Max Protection 30Mtrs from One
No Product warrenty from Manufacturer
High Maintenance Require
Earthing below 10.00 Ohm
Lightning Risk assessment Study is actually the measure of risk of a lightning strike and
probability of damages. As Per IEC62305-2.
DMC Insulator .
GI/FRP Mast .
Step 1
Separation Sheet
Gel / Silicon
Step 2
Close the filled Silicon enclosure from top and
bottom , complete installation is done.
Step 3
Copper Clad Steel Solid ROD and Conductor
Copper Cladded Conductor For Electrical
Installation
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper. These
conductors/ wires
or strands are equipped with the strength of steel with the conductivity and copper with the better corrosion
resistance property. The concentric copper cladding is metallurgic ally bonded to a steel core through a continuous,
solid cladding process using pressure rolling for primary bonding. The copper cladding
thickness remains constant surrounding steel. We use different steel grades for the steel core result in Dead Soft
Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in Annealed
and Hard drawn. We are delivering products with varied conductivity and tensile strength as per the customer need.
Further, the wire can be processed to be silver plated or tinned copper clad steel wire.
Most Efficient JointProcess
DMC Insulator .
GI/FRP Mast .