Академический Документы
Профессиональный Документы
Культура Документы
The alloy EN AW-7003 is a high strength alloy for highly loaded structural
applications. Typical applications are scaffolding elements, mobile cranes, lifts, etc.
Weldability1
Gas: 3 TIG: 2 MIG: 1 Resistance welding: 6 Spot welding: 3
Typical filler materials (EN ISO18273): AlMg5Cr(A), AlMg4.5Mn0.7(A), AlMg4.5MnZr.
The alloy exhibits a good recovery of mechanical properties after welding, up to 90%
of the original values of the base metal (depening on welding conditions).These
properties can be achieved after natural aging for a prolonged period or after an
additional artificial aging treatment2.
Machining characteristics1:
T4 temper: 3 T6 temper: 2
Corrosion resistance1
General: 2 Marine: 4
The alloy is however susceptible to stress corrosion cracking
Coating properties1
Hard/protective anodising: 2 Bright/colour anodising: 3
1
Relative qualification ranging from 1-very good to 6 unsuitable
2
Werkstoffprfbericht 2003-710-0546GSI DLV Duisburg, March 2005
Nedal Aluminium Alloy data sheet jun-2005
P.O.-Box 2020 EN AW-7003
NL-3500 GA Utrecht, The Netherlands rev.00
T. +31 30 2925711 F. +31 30 2939512
sales@nedal.nl www.nedal.com