Академический Документы
Профессиональный Документы
Культура Документы
Basiclly what G3/G4 means it the type of DOC used (Disk On Chip)
Soft reset your Prophet (insert the stylus into the little hole on the bottom of
your Prophet (to the left of the mini-USB connector)
When your prophet boots up, it will show you a number of things in red text.
For Example:
IPL: 2.09.000
SPL: 2.20.000
GSM: 02.47.21
OS: 2.20.7.34
If you look at the IPL and SPL numbers, you'll see they end in .000 in this case
your phone in a G3 model.
So, in short:
P.S.
It is not possible to upgrade from a G3 model to a G4 model through software, as
the DOC is a piece of Hardware.
********************
Once the colour bands are displayed you can connect to the device via USB. Using
mtty or a similiar program and specifying \\.\WCEUSBSH001 as the port.
Hard Reset
To Hard Reset device. Warning this will erase all information, contacts etc.
However data on the SD card will not be erased. Hold down camera button, comm
manager button and reset the device keep holding the buttons down until you get
the following message on the screen: "Press Send to restore factory default." At
this point press Send (Green Phone)
******************
==================================================================================
===============
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
========================
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
========================
========================
Change the width of the vertical scroll bar and the height of the horizontal
scroll
bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is
13
========================
========================
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button and a timer display showing how long GRPS is in use for
the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
========================
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:00000000
========================
1.HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE
2.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\FATFS
Original Value = 0
3.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Filters\fsreplxfilt
Original Value = 0
4.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Profiles\MSFlash\FATFS
For Step 4, if your PDA don't have this registry, add new registry and use DWORD
value.
========================
Make sure bluetooth is alive during a conversation. If you ever have trouble with
BT timing out, try:
HKEY_Current_User\ControlPanel\Phone
Change the Sleep key from a 1 to 0.
========================
Get skype to work without overclocking and increase general Skype performance:
"HKEY_LOCAL_MACHINE\SOFTWARE\Skype\Phone\Audio"
Change "DisableCodecs" to "ILBC G729 EG711U"
========================
"HKEY_CLASSES_ROOT\cabfile\DefaultIcon"
========================
EvilDaz
========================
hklm/software/htc/engineermode/
save
open file explorer and unhide files and folders. navigate to \\windows\ and search
for
GSMTestMode.exe and create a link to your programs or start or where ever you
would like
to run the file from.
=====================