Вы находитесь на странице: 1из 20

Data Sheet, V1.5, Nov.

2007

Uni- and Bipolar Hall IC Switches for


Magnetic Field Applications

TLE4905L, TLE4935L,
TLE4945L, TLE4945-2L

Sensors

N e v e r s t o p t h i n k i n g .
Edition 2007-11
published by Infineon Technologies AG,
Am Campeon 1-12,
81726 Mnchen, Germany
Infineon Technologies AG 2007.
All Rights Reserved.

Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.

Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com).

Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Uni- and Bipolar Hall IC Switches for TLE4905L, TLE4935L,
Magnetic Field Applications TLE4945L, TLE4945-2L

Features
Digital output signal
For unipolar and alternating magnetic fields
Large temperature range
Temperature compensated magnetic performance
Protection against reversed polarity
Output protection against electrical disturbances
PG-SSO-3-2P-SSO-3-2

Type Marking Package


TLE4905L 05 L PG-SSO-3-2
TLE4935L 35 L PG-SSO-3-2
TLE4935-2L 35 2 PG-SSO-3-2
TLE4945L 45 L PG-SSO-3-2
TLE4945-2L 45 2 PG-SSO-3-2
TLE4905/35/45/45-2 L (Unipolar/Bipolar Magnetic Field Switches) have been designed
specifically for automotive and industrial applications. Reverse polarity protection is included on-
chip as is output protection against negative voltage transients.
Typical applications are position/proximity indicators, brushless DC motor commutation,
rotational indexing etc.

Data Sheet 1 2007-05


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Pin Configuration
(view on branded side of component)

Center of
sensitive area
2.08 0.1

1.35 0.1

1 2 3

VS GND Q
AEP01364

Figure 1

Pin Definitions and Functions


Pin No. Symbol Function
1 VS Supply voltage
2 GND Ground
3 Q Output

Data Sheet 2 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Circuit Description
The circuit includes Hall generator, amplifier and Schmitt-Trigger on one chip. The internal
reference provides the supply voltage for the components. A magnetic field perpendicular to the
chip surface induces a voltage at the hall probe. This voltage is amplified and switches a Schmitt-
trigger with open-collector output. A protection diode against reverse power supply is integrated.
The output is protected against electrical disturbances.

Threshold
Generator

1 3
VS Q
Hall-
Generator

VS
VRef

Amplifier Schmitt-
Trigger
Output
2 Stage
GND AEB01243

Figure 2 Block Diagram

Data Sheet 3 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Functional Description Unipolar Type TLE4905 (Figure 3 and 4)


When a positive magnetic field is applied in the indicated direction (Figure 3) and the turn-on
magnetic induction BOP is exceeded, the output of the Hall-effect IC will conduct (Operate Point).
When the current is reduced, the output of the IC turns off (Release Point; Figure 4).

Branded Side

VQ
N

+ -
VS AES01231

Figure 3 Sensor/Magnetic-Field Configuration

BOP

BRP Induction

0
t
VQ

VQH

Output Voltage

VQL

t
AED01420

Figure 4 Switching Characteristics Unipolar Type

Data Sheet 4 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Functional Description Bipolar Type TLE4935/45/45-2 (Figure 5 and 6)


When a positive magnetic field is applied in the indicated direction (Figure 5) and the turn-on
magnetic induction BOP is exceeded, the output of the Hall-effect IC will conduct (Operate Point).
The output state does not change unless a reverse magnetic field exceeding the turn-off magnetic
iinduction BRP is exceeded. In this case the output will turn off (Release Point; Figure 6).

Branded Side

VQ
N

+ -
VS AES01231

Figure 5 Sensor/Magnetic-Field Configuration

BOP
0 Induction
t
BRP

VQ

VQH

Output Voltage

VQL

t
AED01421

Figure 6 Switching Characteristics Bipolar Type

Data Sheet 5 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Absolute Maximum Ratings


Tj = 40 to 150 C
Parameter Symbol Limit Values Unit Remarks
min. max.
Supply voltage VS 40 32 V
Supply voltage VS 40 V t < 400 ms; = 0.1
Output voltage VQ 32 V
Output current IQ 100 mA
Output reverse current IQ 100 mA
Junction temperature Tj 40 150 C
Junction temperature Tj 170 C 1000 h
Junction temperature Tj 210 C 40 h
Storage temperature Tstg 50 150 C
Thermal resistance Rth JA 190 K/W

Note: Stresses above those listed here may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.

Operating Range
Parameter Symbol Limit Values Unit Remarks
min. max.
Supply voltage VS 3.8 24 V
Junction temperature Tj 40 150 C
170 1000 h,
thresholds may
exceed the limits

Note: In the operating range the functions given in the circuit description are fulfilled.

Data Sheet 6 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

AC/DC Characteristics
3.8 V VS 24 V; 40 C Tj 150 C
Parameter Symbol Limit Values Unit Test Condition Test
min. typ. max. Circuit

Supply current ISHigh 3 7 mA B < BRP 1


ISLow 4 8 mA B > BOP 1
Output saturation VQSat 0.25 0.5 V IQ = 40 mA 1
voltage
Output leakage IQL 10 A VQ = 24 V 1
current
Rise/fall time tr / tf 1 s RL = 1.2 k 1
CL 33 pF

Note: Typical characteristics specify mean values expected over the production spread. If not
otherwise specified, typical characteristics apply at Tj = 25 C and the given supply
voltage.

Data Sheet 7 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Magnetic Characteristics
3.8 V VS 24 V
Parameter Symbol Limit Values Unit
TLE4905 TLE4935 TLE4945 TLE4945-2
unipolar bipolar latch bipolar bipolar
switch switch
min. max. min. max. min. max. min. max.
Junction Temperature Tj = 40 C
Turn-ON
induction BOP 7.5 19 10 20 6 10 3 6 mT
Turn-OFF
induction BRP 5.5 17 20 10 10 6 6 3 mT
Hysteresis
(BOP BRP) BH 2 6.5 20 40 2 10 1 5 mT
Junction Temperature Tj = 25 C
Turn-ON
induction BOP 7 18 10 20 6 10 3 6 mT
Turn-OFF
induction BRP 5 16 20 10 10 6 6 3 mT
Hysteresis
(BOP BRP) BH 2 6 20 40 2 10 1 5 mT
Junction Temperature Tj = 85 C
Turn-ON
induction BOP 6.5 17.5 10 20 6 10 3 6 mT
Turn-OFF
induction BRP 4.5 15 20 10 10 6 6 3 mT
Hysteresis
(BOP BRP) BH 2 5.5 20 40 2 10 1 5 mT

Data Sheet 8 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Magnetic Characteristics (contd)


3.8 V VS 24 V
Parameter Symbol Limit Values Unit
TLE4905 TLE4935 TLE4945 TLE4945-2
unipolar bipolar latch bipolar bipolar
switch switch
min. max. min. max. min. max. min. max.
Junction Temperature Tj = 150 C
Turn-ON
induction BOP 6 17 10 20 6 10 3 6 mT
Turn-OFF
induction BRP 4 14 20 10 10 6 6 3 mT
Hysteresis
(BOP BRP) BH 2 5 20 40 2 10 1 5 mT

Note: The listed magnetic characteristics are ensured over the operating range of the integrated
circuit. Typical characteristics specify mean values expected over the production spread.
If not otherwise specified, typical characteristics apply at Tj = 25 C and the given supply
voltage.

Data Sheet 9 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

S 1
VS VS
+
4.7 nF
- 2 TLE
RL GND
4905/35/35-2/45-2
CL
3
Q
Q
AES01244

Unipolar Type TLE4905 Bipolar Type TLE4935


VQ VQ

VQH VQH

VQL VQL

0 B RP B OP B B RP 0 B OP B
B HY B HY AED01422

AED01426
8
B 3.8 V <
_V <
_ 24 V
S
mT

B HYmax

B HYtyp

2
B HYmin

0
-40 0 50 100 C 200
Tj

Figure 7 Test Circuit 1

Data Sheet 10 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Mainframe Line Sensor

1
VS VS

4.7 nF
2 TLE
1.2 k GND
4905/35/35-2/45-2
4.7 nF
3
Signal Q

AES01247

Figure 8 Application Circuit

Data Sheet 11 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

If not otherwise specified, all curves reflect typical values at Tj = 25 C and VS = 12 V


Quiescent Current versus Quiescent Current versus
Supply Voltage Junction Temperature
AED01248 AED01249
8 8
S S
mA VQ = High mA
VQ = High
6 6

4 T j = -40 C 4
VS = 24 V

T j = 150 C
VS = 4.0 V
2 2

0 0
0 5 10 15 V 25 -50 0 50 100 C 200
VS Tj

Quiescent Current Difference Saturation Voltage versus


versus Temperature Output Current
AED01459 AED01461
1.0 1.2
S VQ V
mA
S = SLow - SHigh 1.0 3.8 V <_ VS <_ 24 V

0.75 Q = 40 mA
0.8

0.5 0.6 T j = 125 C

0.4
0.25
0.2 T j = -40 C

0 0
-40 0 50 100 150 C 200 0 20 40 60 mA 100
Tj Q

Data Sheet 12 2007-05


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

TLE4905 Operate-and Release-Point TLE4905 Hysteresis versus Junction


versus Junction Temperature Temperature
AED03289 AED03290
25 8
3.8 V <_ VS <_ 24 V B 3.8 V <_ VS <_ 24 V
B mT mT

20
6
B OPmax
B HYmax
15
B RPmax
4

10

B OPmin 2
B HYmin
5
B RPmin

0 0
-40 0 50 100 C 200 -40 0 50 100 C 200
Tj Tj

TLE4935 Operate-and Release-Point TLE4945 Operate-and Release-Point


versus Junction Temperature versus Junction Temperature
AED03291 AED03293
30 30
B 3.8 V <_ VS <_ 24 V 3.8 V <_ VS <_ 24 V
mT
mT B
B OPmax 20
20

B OPmax
10
B OPmin
10 B RPmax

0 B OPmin
-10
B RPmin
B RPmax
-10
-20

B RPmin
-20 -30
-40 0 50 100 C 200 -40 0 50 100 C 200
Tj Tj

Data Sheet 13 2007-05


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

TLE4945-2 Operate-and Release-Point


versus Junction Temperature
AED03294
18
mT 3.8 V <_ VS <_ 24 V
B
12

B OPmax
6
B RPmax

B OPmin
-6
B RPmin

-12

-18
-40 0 50 100 C 200
Tj

Data Sheet 14 2007-05


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Package Outlines

PG-SSO-3-2
(Plastic Single Small Outline Package)
0.8 0.1 x 45

4.160.05
0.2
0.15 MAX.

4.060.08 2 A

3.290.08
1 .9 MAX. 1.520.05

3 0.06

0.35 0.1 x 45
(0.25)

7
1)
1 MAX.

0.6 MAX. (0.79)

0.4 0.05 0.2 +0.1

1 2 3
1.270.25
1.270.25

12.71
23.8 0.5
38 MAX.

1-1
6 0.5
+0.75
9 -0.5

180.5

A Adhes iv e
Tape

Tape
6.350.4 4 0.3 0.25-0.15
12.70.3 0.39 0.1
1) N o s older func tion area Total toleranc e at 10 pitc hes 1 GP O05358

Data Sheet 15 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Branded Side

Hall-Probe

d : Distance chip to branded side of IC


P-SSO-3-2 : 0.57 0.08 mm

AEA02510

You can find all of our packages, sorts of packing and others in our Infineon
Internet Page Products: http://www.infineon.com/products. Dimensions in mm

Data Sheet 16 V1.5, 2007-11


TLE4905L, TLE4935L, TLE4945L, TLE4945-2L

Revision History: 2007-11, V1.5


Previous Version: V1.4:
Page Subjects (major changes since last revision)
Package changed to PG-SSO-3-2

For questions on technology, delivery and prices please contact the Infineon Technologies offices
in Germany or the Infineon Technologies Companies and Representatives worldwide: see our
webpage at http://www.infineon.com

We Listen to Your Comments


Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
sensors@infineon.com

Data Sheet 1 V1.5, 2007-11


w w w . i n f i n e o n . c o m

Published by Infineon Technologies AG

Вам также может понравиться