Академический Документы
Профессиональный Документы
Культура Документы
General Rule
1. Coverage
The policy covers all the PCR and TBR tyres manufactured by DAEWOO BRAND TYRE, and sold in the
replacement market.
2. Period of Validity
Any DAEWOO TYRE with a complete serial number is covered against defects in workmanship and materials for 3
years from date of purchase. After that time, the warranty is terminated.
Notice: The tire age calculated from the date of purchase. If the proof of purchase is not available, the tire date of
3. Warranty Exclusions:
3.2 The tread wear and damage will not be covered by the warranty influenced by the following conditions.
3.2.1 Transportation accident (including puncture, cut, impact breaks, crack-up), wreck, collision etc.
3.2.2 Fire, accident or vandalism including misalignment, wheel imbalance, abnormal vibration and
brake.
C.P.O. BOX 2810 Seoul 714-100, Korea (Tel. +82 2 759 3229 / Fax. +82 2 759 2506 / e-mail : jhchoi10@daewoo.com )
3.2.3 Improper inflation, overloading, over speed, misapplication, misuse, oversight, racing or unsuitable
3.2.4 Damage or indirect damage result from Aging, inconvenience, mechanical usage
3.2.7 After the tyre is away from factory, the appearance is changed consciously (For example, put a
3.2.8 After the tyre is away from factory, tyre material is added (Such as tyre stuffing, encapsulate or
counterweight).
3.2.9 Uniformity or vibration claims on tyres purchased more than 6 months prior to presentation for
adjustment, or if proof of purchase is not available, more than 6 months after the manufacture date.
3.3 Exclusion:
DAEWOO TYRE will not bear any indirect loss, time loss, vehicle loss and inconvenient loss within allowable scope
of the law.
TYRE and will be kept for 3 months by oversea dealers. Meanwhile, oversea dealers should make records of the
failure tyres and keep in file. After 3 months, the tyres can be disposed by oversea dealers.
5. Owner obligations:
5.1 Owner must guarantee to use tyre under a standard pressure, loading and speeding.
5.2 In order to be eligible for DAEWOO brand RADIAL TYRES limited warranty service, owner must present
the defective tyre and documents with sales date to a dealer or a representative authorized by DAEWOO TYRE.
C.P.O. BOX 2810 Seoul 714-100, Korea (Tel. +82 2 759 3229 / Fax. +82 2 759 2506 / e-mail : jhchoi10@daewoo.com )
POLICY OF WARRANTY
Any tire covered by this policy that becomes unserviceable due to a covered warranty condition, such tire will, on
1. TBR TYRE
Adjustment
1.1.1. Coverage 100
In case of any TBR tyres with the defects in the workmanship and materials, if the remaining
tread depth is worn out by less than 3.0MM(less than 1.6MM for the out of round and out of
balance), the DAEWOO will give 100% adjustment per the benchmark price.
In case of any TBR tyres with defects in the workmanship and materials, if the remaining tread
depth is worn out by more than 3.0MM and the remaining tread depth is worn out by not less
than 1.6MM, DAEWOO will give the adjustment on a pro-rata basis multiplying the
1.1.3. No Warranty
Once the tread remaining depth is less than 1.6MM, the tire is considered worn out completely
1) Vernier caliper is used when measuring, avoiding the wearing mark. The bottom of caliper spans in
the measuring groove, and the vernier caliper must be vertical to the bottom of groove.
C.P.O. BOX 2810 Seoul 714-100, Korea (Tel. +82 2 759 3229 / Fax. +82 2 759 2506 / e-mail : jhchoi10@daewoo.com )
2) For longitude pattern tyre: The position of measurement is groove depth of middle line on the tread.
Measure the depth of four equal indexes on the tread circle, and the average value of the four data is
regarded as the remaining tread depth and keep one decimal digits.
For lateral or block pattern tyre: The position of measure is groove depth of middle line on the tread
near to the wear mark. Measure the depth of four equal indexes on the the tread circle, and the
average value of the four data is regarded as the remaining tread depth and keep one decimal digits.
3) DAEWOO TBR Tyres Pattern List see the DAEWOO technical standard,the adjusted percentage is
2. PCR Tyre
2.1.1. In case of any PCR tyres with the defects in the workmanship and materials, if they are
worn out less than 15% of the original depth, DAEWOO will give 100% adjustment per
In case of any PCR tyres with the defects in the workmanship and materials, if the tread
are worn out more than 15% of original depth, and the remaining tread depth is more
than 25% of original depth, DAEWOO will give the adjustment on a pro-rata basis
2.1.3 No Warranty
Once the tread remaining depth is less than 25% of original depth, the tire is considered
1) Vernier caliper is used. when measuring, avoiding the wearing mark. The bottom of caliper spans in
the measuring groove,and the vernier caliper must be vertical to the bottom of groove.
C.P.O. BOX 2810 Seoul 714-100, Korea (Tel. +82 2 759 3229 / Fax. +82 2 759 2506 / e-mail : jhchoi10@daewoo.com )
2) The position of measurement is groove with wear mark. Measure the depth of four equal indexes on
the the tread circle, and the average value of the four data is regarded as the remaining tread depth
3) DAEWOO PCR Tyres Pattern List see the DAEWOO technical standard, the adjusted percentage is
The warranty is valid from November 1st, 2009 till there is any further notice
______________________________
J.S.Na / General Manager
Daewoo International Corp.