Академический Документы
Профессиональный Документы
Культура Документы
PMMW Issue 16
Model News 6
We cover the latest developments in the plant
& construction world
Bobcat Minis 23
Model Reviews
14 Bauer MC96 Foundation Rig Caterpillar D9T Dozer 30 Caterpillar 18M3 Grader 31
Model Preview
Caterpillar D10T2 32
Model Review
Steven Downes
Plant and Machinery Model World Editor
Email - editor@plantmodelworld.co.uk Website - www.plantmodelworld.co.uk
http://www.facebook.com/PlantModelWorld
Conrad Models
Exciting NEW models.
Conrad has unveiled several new
Putzmeister models including a new 4-axle
P9G UL concrete mixer, a Pumi 25-4 mixer
with concrete pump and both M38-5 (3-axle)
and M42-5 (4-axle) concrete pumps, all Putzmeister M42-5
based on Mercedes Benz Arocs chassis. Concrete Pump.
Putzmeister M38-5
concrete pump and
P9G UL Mixer.
Komatsu
HM400-5
Articulated Hauler
NEW 1:50th scale model.
First Gear has announced a new 1:50th scale construction replica
1:50th scale Komatsu HM400-5 ADT from First Gear.
due sometime in the second half of 2016. The HM400-5 is an update
to the previously released version with new tooling and the latest
markings. The pre-production model looks promising.
Historic
Kaelble Tipper
NEW model announced.
First Gear has announced a new 1:50th scale construction
replica due sometime in the first half of 2016. The D275 will
join previous Komatsu dozer models produced by First Gear
and the pre-production model looks promising. Exclusive 1:50th scale
Kaelble KDV 22 E8 with
Meiller tipper body.
Manitowoc MLC300
(Towsleys / Weiss Brothers 1:50th).
Manitowoc MLC650
(Towsleys / Weiss Brothers 1:50th).
Manitowoc Cranes
Showcasing two models ahead of release next year.
Manitowoc have shown prototypes of two new lattice boom crawler cranes, the
300 ton capacity Manitowoc MLC300 and the larger MLC650, both of which are
expected to be released early next year with development being undertaken by
Weiss Brothers for Towsleys.
Prototypes shown and subject to change
Bauma Roundup
(Conrad 1:50th).
Wacker Neuson
RD45 roller, TH522
Telehandler and
EW100 wheeled
excavator (1:50th).
Terex 3160 Challenger Mobile
Images by Daniel Wietlisbach.
Caterpillar M318F
Wheeled Excavator
(Diecast Masters 1:50th).
Hamm HD14 VV
Tandem Drum
Roller
NZG 1:50th Scale
Above: Hamm HD 14 VV
Tandem Drum Roller on
display at Bauma 2016.
Left:
The drums have a silver
finish and rotate freely.
Above:
The new release
features a number of
casting changes from
the earlier version.
Right:
The drivers
station has
been accurately
modelled.
he Hamm HD14 VV is featuring new tooling for the The markings reflect the latest
T an articulating tandem
drum roller with two
vibratory drums, tipping
the scales at 4.3
ton and powered by a Kubota
4-cylinder engine. The new
engine cover, side drum frames
and grab rails fitted to the
operators station. It has working
articulated steering and a fully
populated driver area showing
the steering wheel and control
corporate design and are crisply
applied. Fine detailing includes
the painted light lenses front
and back while the engine
cover has black highlighted
engine grills with silver dots
1:50th scale model from NZG is levers while the ROPs frame is representing the bolt heads
an update to the earlier design, topped with an amber beacon. on the roller frames.
Manufacturer: NZG
Scale: 1:50thmod
Left:
The perfect pair,
the Hamm HD14VV
and the Vogele
Super 800-3i.
1:50th Scale
ompanies regularly
C
transfer chain and also reducing been convincingly replicated.
Manufacturer: Conrad
update equipment the width of the machine during Two versions of the model have
to use the latest transport. The front strike rollers been produced, the Super 800-3i Item No: 2519/0 (800-3i)
technologies and can also be folded up to allow a for the European market and the 2519/1 (700-3i)
often, scale models are narrow paving width and the rear Super 700-3i for the US market,
updated to reflect the tweaks and screed has height adjustment differing only in the printing of Scale: 1:50thmod
enhancements. This is the case with extending side sections to the machine designation. A
with the Vogele Super 800-3i increase the paving width. The small size reproduction of the Star Rating:
tracked paver and interestingly, operator stands on a platform specification brochure is included
Conrad has been selected to with a silver finished panel in the box to round out another
produce the new version which, printed with an array of switches welcome addition to the
despite its size, packs plenty of and controls which really does Vogele model fleet.
functionality. The chassis has look good. The model is
narrow rubber tracks with a produced predominantly from
raised tread pattern which rotate. metal with very little plastic
The hopper has pivoting sides used which is good to see and
which have a dual purpose of the updated engine compartment
dumping the material onto the design, with the deep slots has
Right:
The main control
panel is authentically
replicated with the
various buttons and
switched shown.
Above:
The hopper sides fold up,
as do the front roller
bars which are mounted
to a pivoting frame.
Right:
Right:
Every aspect of the
The array of printed
real machine has corporate markings and from what I can
safety labels really
been expertly cap- see, there are no casting changes on the
stand out and give
tured. model. Opening engine covers, a folding
the model an authen-
tic look. canopy with extending sun screens,
pivoting seats, a sliding control panel and
height adjustable extending rear screed
are just some of the many features found
on the model.
Manufacturer: WSI
Scale: 1:50thmod
Bauer MC96
with HDS-T & BC35
Trench Cutter 1:50th Scale
I
It would have been easy for
version of the MC96 which Bymo just to reproduce the
came with the BC35 trench MC96 using the same tooling
cutter and HTS60 hose and yet, they have taken the
tensioning system. Bymo opportunity to update the model
has now followed up with a new with changes to the outside of
derivative of the equipment which the track frames to incorporate
still uses the MC96 as the carrier twelve access steps while the
but this time, the HDS-T system side platforms with metal safety
is modelled. The model reviewed railings are now a different layout
her is one of a small number without the steps at the rear.
produced for the Bauma trade Another small difference is the
show and as such, the box exhaust stack which is larger.
does not contain some of the The undercarriage is still
components to allow the model extending to provide a stable
to be set up as a standard lifting base and the side panel can be
crane. When the full production detached to uncover the winch
begins later in the year, the holes and winders. Unfortunately,
model will have the ability to be the winches themselves are the
set up as a duty crane and the same as the previous version and
box will also include assem- there is no brake on the lines, so
bly instructions. it is not possible to have them set
up holding any weight.
Left:
When fully rigged,
the MC96 with HDS-T
and BC35 trench
cutter is an
impressive model.
Left:
The head consists
Above: The model strips down to a transport configuration. of pulleys and reel
supports for the
hydraulic and hose
lines.
Below:
The model is supplied with
several attachments to
demonstrate the capabilities
of the loader.
Conrad
1:50th Scale
M interesting portfolio
of innovative
equipment, ideally
suited for a
multitude of tasks and at the
recent Bauma show, several
on the demonstration area.
The AS900 swing loader is
an interesting development,
powered by a Deutz TDC 2,9 L4
diesel engine generating 75hp.
The hydrostatic drive and
design with internal Z-Kinematics
offer optimum visibility, high
tear-out forces and parallel
motion allowing all the tasks
of a standard wheel loader to
be performed while extending
machines from their range all-wheel steer provide excellent its use for more interesting
applications, particularly with
additional work tools and this
has been fully realised with the
new 1:50th scale replica from
Conrad.
Below:
The 4-in-1 loader bucket is a
great addition to the model.
Above:
The rigid chassis has working
linked steering of both axles.
Below:
The pallet forks allow loading
operations to be performed
.
Manufacturer: Conrad
Scale: 1:50thmod
Left:
The monoboom
loader arm can
rotate through
180 degrees.
Below:
The cabin has
a modelled interior
and slightly tinted
glazing.
Sennebogen 6113E
Telescopic Crawler
Ros 1:50th Scale
Right:
The cabin has a
modelled interior
and can be tilted.
The Sennebogen
6113E is an
excellent 1:50th
scale model
with tons of
functionality.
Below:
The extending jib is
Previous Sennebogen
T
eyes is a nice touch, as are a nice addition, complete
models from Ros have the warning labels. The final with adjustable angle
been interesting drive housing shows all the bolt and second winch.
releases, but have details and the linked tracks
had aspects that do rotate with tensioned idler
are lacking in some of the finer wheels. The central section
details, with some build quality of the undercarriage frame has
issues, and the use of plastic for pivoting jacks which are used
parts which would have been during self assembly when
better realised in metal. That the track frames need to be
has all changed with the release detached and these are height
of the 6113E telescopic crawler adjustable by rotating them.
crane. The model has a The upper body has a
significant weight to it and a detachable side panel hiding the
solid build which is enhanced winch winding key, something
with plenty of detail and realism. we have seen before from Ros
The undercarriage features and a nice touch to prevent
extending track frames which losing the winder. The cabin
are rather plain in appearance has a light coloured interior
with all the lower roller detailing consisting of the side console
integrated into the frame casting. and hand levers with platforms
Green painting of the lifting integrated into the front and side
Left:
All the grab
handless and safety
rails are produced
from metal which
is great to see.
Right
The work platform
is very well
engineered, with
pivoting side gates
and hinged floor
panels allowing
adjustment of
the length.
Right: Below:
The jib has an Everywhere you look,
extending support, the level of detail is
just like the full high with plastic
sized machine. used very sparingly.
Right:
The rear engine
cover can be
opened to reveal
the interior.
Tracked Excavator
Scale: 1:32ndmod
Yanmar V8
Wheel Loader
Ros 1:32nd Scale
Below:
The loader arms rise
Manufacturer: Ros to a realistic dump height.
Scale: 1:32ndmod
Left:
The opening cabin
door reveals all
the interior details.
Left:
The undercarriage has a
working blade and rubber tracks.
Right:
Good surface
engraving of the
grills and handles.
Scale: 1:22ndmod
Bobcat E20
Mini Excavator Above: The rubber tracks fitted
Universal Hobbies 1:25th Scale to the undercarriage look good.
Right:
The addition
of a thumb is
a nice touch
from UH.
ollowing the release of very limited on both the bucket although there are no hydraulic
rdict
PMMW Ve
The Bobcat S450 compact skid steer loader is a nimble machine, weighing in a little over 2 ton
and powered by a Kubota 4-cylinder diesel engine. The equivalent tracked machine is the T450
which is a little heavier at 2.7 ton. Following the release of the Bobcat E20, Universal Hobbies have
now followed up with 1:25th scale replicas of the S450 wheeled skid steer and T450 compact
track loader.
oth models share the
B
Right:
majority of parts with The S450 wheeled
differences to the skid steer has an
undercarriage and unglazed cabin.
upper engine housing
design the most noticeable. The
cabin interior has been finished
with the drivers seat, safety
support bar and joystick controls
all visible while the T450 is fitted
with a glazed front door and
glazed side panels. The open
mesh style cabin frame has
integrated work lights with clear
glazed lenses while the rear
engine panel has red tinted
and clear lenses along with
the distinctive Bobcat logo.
The upper engine panels are
slightly different between the
S and T versions and it is good
to see Universal Hobbies actually
model the small differences. The
loader arms have a good range
of movement with silver finished
hydraulic supply lines fitted,
terminating with valves ready
Left:
The loader arms
have a full range of
height adjustment
and bucket tip.
Above:
The T450 multi-terrain loader has a tracked
undercarriage and fully glazed cabin.
MMW Verdict
P
Below:
All four outriggers pivot outwards.
.
Above:
The compact dimensions
are captured well, here
in the transport configuration.
.
Unic UR-W295C
Mini Crawler Crane 1:24th Scale
he Unic UR-W295C predominantly from die-cast been replicated, like the four be rotated through 360 degrees
T crawler crane is capable metal parts and has some great outriggers which pivot out and there is a graphic depicting
of lifting a load of 2.93 functionality. The chassis has into position. Each leg has a the loading chart on the sides
ton at a reach of 1.4m rubber tracks which are very telescopic extension with a of the boom along with the
and has a maximum thin with a ridged tread pattern pivoting pad and they fold into Unic markings and logo.
lifting height above ground while the main body has a clear the working position before being The model has been
level of 8.8m. Tipping the scales sticker populated with the various lowered using the fairly stiff produced for promotional
at 1850kg, the crane is narrow switches, dials and warning hydraulics which allow the entire purposes and as such, it is not
enough to pass through a labels with levers fitted to the chassis to be lifted off the currently available to purchase,
standard size doorway and is upper edge which would control ground. The lifting boom has an so anyone wanting to get their
powered by either a Mitsubishi the various functions on the full integrated winch with winding hands on this rather interesting
petrol engine or an electric sized machine. handle allowing the hook to be model will need to keep a keen
power unit. When holding the model, the adjusted while the single stage eye on Ebay.
One of the surprise finds at weight is impressive and once telescopic section extends
Bauma was a 1:24th scale model you start to investigate the out with height adjustment
of the UR-W295C mini crawler model, all the main provided by another stiff
crane which is constructed functionality has cylinder. The boom can
Above:
The clear sticker is printed with
the various dials and switches.
.
Above:
The extending legs are strong
enough to lift the entire chassis
off the ground.
.
Above:
The main boom is
telescopically extending
with a working winch.
.
26 PMMW Magazine - Spring 2016 www.plantmodelworld.co.uk
Product Review Grove GMK6300L Mobile Crane
Grove
GMK6300L
Mobile Crane
Conrad 1:50th Scale
Right:
The new Grove
GMK6300L from
Conrad is a fine
addition to the
Grove crane fleet.
Until recently, the full range of diecast models for the Manitowoc crane
group were supplied by THW and since their demise, new models of any
Manitowoc group range have been lacking. That has now changed with
Conrad once again producing Grove crane models, starting with the
launch of the 6-axle GMK6300L telescopic mobile crane. As is typical of
a Conrad model, the weight is considerable with plenty of functionality
built into the replica.
Above:
The engine bay has
The chassis has a full and work fairly well, reducing the
T
collector. The upper surface textured surfaces.
set of steering axles, of the deck has a fine textured width of the chassis by tucking
linked in pairs and finish with access ladders in during road travel.
the axles have some integrated into the sides along The upper structure houses a
oscillation to simulate with two simulated storage single winch with a 3 pulley hook
suspension movement. The front compartments. The two stage block included in the box. The
cabin is mounted low with silver extending outriggers provide the rear ballast is split into 5 main
steps protruding from the lower added stability for the crane with plates which slide onto the
body, complete with a textured each of the jacks able to lower brackets on the underside of the
anti-slip upper surface while inset by rotating them, with the screw frame and click into place while
lights are integrated into the front thread only on the upper part additional ballast fits onto the
body panel. Windscreen wipers of the legs so they look like ends of the main ballast with a
are fitted to the front window hydraulic pistons which is a nice simple fit mechanism. The angle
while the rear view and safety addition while the sliding blocks of the upper crane cabin can be
mirrors require fitting by the are a new feature from Conrad adjusted to provide a better view
Right:
The counterweight
segments consist of 5
main blocks with two
different shaped
extension blocks
fitting to each side.
of the work area and this is stiff further increases the lifting
in operation, so holds at any height and this has hydraulic
chosen position. The telescopic adjustment of the angle, pinning
boom has a typical design with into place on the brackets of
spring clips inside the sections the boom head.
locking into place as the This new release from Conrad
sections extend while the main may not have some of the finer
lift cylinder uses the locking detailing found on the models
mechanism first introduced from TWH but it does capture
on the Terex AC1000 using a the aesthetics of the original
Right: spanner to tighten the end of crane very well, while being
The counterweight the cylinder to grip the piston both functional and of solid build
block slides into place and hold the angle of the boom. quality with authentic placement
on the upper structure This works very well and allows of the various Grove logos and
using a little force to any boom angle to be set. The markings.
lock it in place. addition of a 2-part folding jib
Right:
The upper cabin is
hinged, allowing it
to tilt for a better
view when
working at
height.
Manufacturer: Conrad
Scale: 1:50thmod
Left:
The main lift cylinder has a locking
mechanism which allows the boom
to be securely set at any angle.
Caterpillar D9T
Bulldozer Below & Right:
Diecast Masters 1:50th Scale Both the blade
and ripper have an
authentic range
of movement.
Above:
Diecast Masters
are continuing
where Tonkin left
off with all metal
safety railings.
Below:
All the hydraulic
cylinders are fitted
with hoses which
look good.
he Caterpillar D9T Caterpillar markings and all casing showing all the bolt
T track-type tractor is
one of the first models
from Diecast Masters
to show what the new
licence holder plans for their
future models, with plenty of
rivet heads covered over. Safety
walkways and scaled metal
railings are prominent on the
model with grab rails integrated
into the cabin frame while the
replicated interior is populated by
heads and toothed sprocket.
The tensioned idler wheels allow
the linked tracks with single
grouser design to rotate freely.
At the rear, all the cylinders for
the ripper frame are piped up,
detail and functionality packed a driver figure. The track frames including a feed for the simulated
into the popular sized dozer. have the lower roller assembly pin puller. One disappointment is
At the front, the blade can be details incorporated into the that the single ripper shank is
adjusted in height with some castings with the final drive integrated into the frame casting.
angular movement of the blade
possible, topped with flexible
hoses to the main lift cylinders
which have integrated lights and
mirrors although on the sample,
these are not painted silver. The Below:
The raised sprocket
printing of the side engine grill
and linked tracks
perforations looks realistic and
rotate freely.
the paint finish is to a high
standard throughout with
accurate placement of the
Scale: 1:50thmod
Caterpillar 18M3
Motor Grader
Diecast Masters 1:50th Scale
Above:
The cabin is
surrounded with
safety railings
which are a nice
addition.
he Caterpillar 18M3
T motor grader is
another example of
the increased level of
detail and functionality
being added to the latest
Caterpillar models by Diecast
possible. The articulating frame
offers limited steering and the
rear bogies do allow some
oscillation. The angular shape
of the cabin has been accurately
modelled and shows off the
safety railings integrated into the
rear wheel fenders with operator
access achieved from the rear
of the machine. Even the fire
suppression canister has been
realised, fitted to the rear of the
Masters. The front axle has fine detailing including grab rails, engine bay while printing has
working steering and some extending mirrors and all-round been used to highlight the
pivoting movement with the work lights with painted lenses. perforations in the engine panels.
Above: mouldboard fully piped up with What makes the model shine If this is the standard we can
The rear scarifier is height flexible hydraulic lines. The range is the decision to add the full expect from Diecast Masters
adjustable and finished of movement of the blade is fairly mining spec package which moving forward, then collectors
with hydraulic lines. realistic, with height, rotation and has been accurately modelled to of Caterpillar models should be
angular blade movements all include the side walkways and happy with the results.
Scale: 1:50thmod
Left:
The model
has plenty
of functionality.
Caterpillar D10T2
Track-Type
Tractor
CCM 1:24th Scale
Right:
An impressive model,
packed with detail and
functionality.
In the last issue, I took a detailed look at the coal blade version of the 1:24th scale Caterpillar D10T2
from Classic Construction Models. I now cast my eyes over the ripper version which shares many
of the same castings with a different blade and rear ripper assembly so for this review; I will only
highlight the differences starting with the blade which is of a semi-U design with a slotted upper spill
guard which looks good. The two-tone yellow and black colours are authentically applied with all pin
heads painted over. The main cylinders allow height adjustment of the blade with tilting motion also
possible from the small cylinders mounted to the blade arms. The three ripper shanks are separate
in the box and slide into the recesses in the ripper frame where they are secured with a metal pin.
There are two height options for the shanks and not all of them need to be fitted. The lift and tilt
cylinders on the ripper are fairly stiff and have all the flexible hydraulic lines added.
A
s a large model, the Below:
packaging has to The configuration
be strong enough of rear 3-shank ripper
to protect the model and front semi-U blade
is authentic.
during transport
and while the box was solidly
constructed and undamaged,
I was unlucky with my purchase
as it arrived with a broken main lift
cylinder along with several loose
parts rattling around inside the
box. The loose parts were easy
enough to glue back in place but
for the cylinder, this required more
work to fix, starting with an email
to CCM to request a new
Below:
The cabin interior has been
convincingly modelled.
Right:
The paint finish and
printing of the model is
to a high level.
Doosan
DX140W Universal Hobbies 1:50th Scale
Wheeled Excavator
niversal Hobbies outriggers at the other end, all and light cluster. The two piece
Scale: 1:50thmod
Liebherr L546
Wheel Loader
Conrad
1:50th Scale
Above:
Good detailing of the cabin,
both inside and out.
Manufacturer: Conrad
Above:
Perforated grills are fitted
to the engine bay.
Above: The underside has a replicated drive-train and oscillating rear axle.
Above:
1:43rd scale Kraz 255B
with KC-3575 crane body
from Start Scale Models.
1/87
Scale Corner
by Dan Goins
I have been invited replica featured at MinExpo 2012.
S to write a recurring
section for this
magazine focusing
exclusively on 1/87th
scale replicas. As many of you
are aware 1/87th (3.5mm=1 Ft.)
Lead researcher on all
of the brass 1/87 Classic Mint
Collectibles Peterbilt, Komatsu
and John Deere projects, a
diorama for Porsche NA,
production of an IH vacuum
is the accurate proportionate truck and numerous custom
model railroad scale known as build projects for private clients.
HO gauge, slightly smaller than I was once hired to provide
1/76 or OO gauge which is onsite repair and custom work
popular in the UK. My name on a large notable private
is Dan Goins and I am sole collection in Australia.
proprietor of Zycon Models I started in the model business
an internet retail/manufacture as a partner in Lonestar Models
operation. I am a past president (not the UK diecast company) Above: Zycon Models 1/87th IH 7600 Vacuum Truck.
of the 1/87 Vehicle & Equipment that produces several American
Club and have numerous style tractor trailer models such
enterprise links with various as the Willson grain trailer and
model production firms such Trailmobile flatbed etc. and
as Classic Construction Models, branched out into brass
Sword Models, Norscot and model retailing when Classic
Athearn Trains to name a few. Construction Models announced
I provide contract research the 12pc 1/87th scale Caterpillar
and OEM license approval set in 1995. This led to several
for companies interested in exclusive co-productions
producing miniature replicas. with CCM including the Cat
Notable projects include the 777D/Klein K1800,Cat
pre-production research on D250E/K500 water trucks and a
the 1/50th Mammoet Coke Cat 325L upgrade undercarriage
Drum Move from WSI, model all Zycon Model exclusives.
production of the Cummins My wife and I maintain two Above: ALL World Models - 1/87th Brass Heavy Haul Set Contractors Cargo.
QSK95 1/18 and 1/87 engine fulltime eBay stores seller ID:
Below: Zycon Models - 1/87th Mack M75 Heavy Haul Tractor. Three of these unique collectibles will be given away in
a draw and to enter, fill in the details below clearly and
carefully and return to us at:
Diecast Masters Competition. 3 Orchard Close, Saracens
Head, Holbeach, Spalding, Lincs. PE12 8AR. UK
Surname
Address
Postcode
E- mail
WIN
OW
pt n 16 es
N
0 s
ac cop t 2 Clo
Y
ot 31 ion
. es
TR
ed tri
Ph g tit
s
e
Au pe
ce y
EN
m
Co
C company to produce
models for the
Manitowoc group
and reviewed here is
the 1:50th scale Potain HUP 32-27
fast erecting tower crane. With
can be shown at different stages
of erection. Once the mast is
vertical, it can be telescopically
extended into two working
positions and is secured in place
with the included pin. As the mast
Left:
The main mast
authentically folds
to the upright position.
new crane technology, the crane is extended, the jib begins to pivot
offers multiple configurations for into the horizontal position and a
more lifting options and these can small pin is used on the bracing Manufacturer: Conrad
0 0 0
be demonstrated on the replica, to set the angle to 10 , 20 or 30 .
from the fully road-ready transport The jib uses more hydraulics to Item No: 2029/0
consisting of a front pivoting unfold the four sections. When
Scale: 1:50thmod
axle with drawbar and a rear axle fully extended, the ballast plates
which clips onto the main mast are needed to prevent the model
Star Rating: mel.
section. The four pivoting stabiliser toppling over and these consist of
arms provide a sturdy base for the three separate interlocking pieces,
crane and the screw down legs each depicting four plates with
ensure a level setting on uneven integrated steps. Conrad has done
surfaces. The main mast is raised a good job in realising the HUP
using a single hydraulic cylinder design.
Above:
The MAN TGS tipper with
Fliegl trailer is an exclusive
model from the MAN
merchandise store.
C
rotating wheels while the front ramps are fitted which have
commissioned to axle has a pivoting drawbar sideways adjustment to allow
produce a 1:43rd scale and 360 degree rotation. The loading of different width
model of their latest underside also has the air equipment while plastic bars
design 3-axle low canisters for the braking system lock the ramps in the raised
loader trailer which has been and a spare wheel. The metal position. To provide support
implemented to Conrads usual deck has simulated wooden during loading, a pair of fold
high standard. The underside of panel detailing and textured down stabiliser legs are fixed to
the trailer has suspension arms areas with a fine diamond the underside of the trailer. Small
holding the axles with freely pattern. At the rear, folding holes are located along the outer
edges of the trailer deck and a
Above: pair of warning boards with red
The ramps fold and white printing are included
up with locking which fit into the holes toward
bars and can the front of the trailer.
be adjusted MAN has commissioned an
in width. exclusive model of the MAN TGS
2-axle tipper with knuckle boom
crane which is paired with the
Fliegl 3-axle low loader trailer and
finished in a blue colour scheme.
The truck uses existing tooling
for the chassis and dump body
which has a steering front axle
and oscillating rear axle. The
42 PMMW Magazine - July/August 2016 www.plantmodelworld.co.uk
Left:
The dump body
tips conventionally
with a pivoting
tailgate and drop
down side panels.
Right:
The Palfinger
knuckle boom
crane allows
self loading
of materials,
complete with
extending
stabilisers.
Manufacturer: Conrad
Above:
For collectors, the
Fliegl trailer is available
with a MAN TGS
3-axle tipper truck.
www.plantmodelworld.co.uk PMMW Magazine - July/August 2016 43
Product Review Palfinger PK200002L-SH Truck Crane on MAN TGS Chassis
Left:
The crane unfolds realistically,
and all cylinders are stiff
so it holds position.
P
to rest lengthways
a new crane class to during travel.
its offerings in the form
of the PK200002L-SH
which closes the gap
between the knuckle boom crane
and the mobile crane. The new
crane features a long arm design,
specifically developed for opera-
tions with a large outreach. It is
the first crane to use the P-profile
extension boom for enhanced
Below: The rear body has an
stability when compared to the
integrated counterweight and
conventional design and also
rear extending stabiliser.
reduces the cranes dead weight.
The main boom comprises eight
hydraulic extensions to provide an five axle truck chassis direct from front frame of the truck with
outreach of 25.6 metres while the the factory allowing standard an extending rear stabiliser
additional PJ 300L fly jib extends optimised mounting. For stability, integrated into the cranes
the outreach to an impressive the crane deploys a H-pattern frame.
45.3 metres corresponding to a 3-stage stabiliser system with 180 This new crane has been
lift height in excess of 49 metres. degree rotational jacks while an released in 1:50th scale by
The crane is matched to four or additional jack is mounted to the German model manufacturer
Above:
A version on a 4-axle
MAN chassis in the ATS
decoration will be available
for collectors.
Loading Buckets
There are several different styles of
general purpose bucket available along
with a narrow trenching bucket. All of
themare directly fitted to the quick
coupler and have some rather good
surface detailing of the wear protection
on the underside of the bucket while
the teeth are particularly well defined,
with both chisel teeth and Tiger teeth
options available. All three buckets
shown here have been printed in the
ultra high detail material which gives
excellent definition of the fine detailing.
Grading Buckets
Two grading buckets are available with different widths. The widest
version has a shallow profile and is printed in the ultra high detail
material which is semi-transparent. The narrower of the two has
drainage holes and has been printed in the standard plastic material
which does have a slightly rough finish.
Chuck Blade
One rather interesting attachment for the 336E is a chuck
blade which is again printed in the ultra high detail plastic.
The main blade has a smooth front surface with lower cutting
blade detailing while the rear has excellent structural detailing.
It is mounted to a pivoting bracket which allows angular
adjustment and the fit here is fairly stiff, so the angle chosen
will remain in position. Interestingly, on this attachment, the
fixed pin on the coupler plate is a part of the printed part unlike
the other attachments which require a metal pin to be fitted.
Thumb
A mechanical thumb
attachment has been designed
for the 336E and this fixes in
place onto the front surface of
the stick. It has an integrated
frame with a pivoting thumb
arm and support bar which
can be fixed into the working
or storage position with the
use of a small metal pin. It has
been printed from the ultra
high detail plastic.
Root Rake
The rake attachment is actually produced from a metal material and
has been cast from a mold using a 3D printed master. The casting of
the ripper tines is very crisp with contoured tip and structural ribbing
details. It is a good addition when paired with the thumb attachment
for land clearance work.
Below:
The XC60 is a much larger version
of the XC30 and both are available
from the GEM webshop.
Left:
The bottom plate can be
adjusted, just like on the
full sized unit.
Right:
The Indeco HP3500ABF
hammer is supplied with
a quick coupler bracket.
Right:
12mm Double Grouser
(Left) and 9.8mm Triple
Grouser (Right).
The full range of GEM finished models are now available to purchase from the new online shop
(www.gem-models.co.uk) as well as their worldwide agents.