Академический Документы
Профессиональный Документы
Культура Документы
PC200-7
PC
200
HYDRAULIC EXCAVATOR
2
PC200-7
HYDRAULIC EXCAVATOR
Working Mode Selection *Measured with Power Max function, 2925 mm 9'7" arm
The PC200-7 excavator is equipped with four working modes
Working Mode Application Advantage
(A, E, L and B mode). Each mode is designed to match engine
speed, pump output, and system pressure with the current Maximum production/power
A Active mode
Fast cycle times
application. This provides the flexibility to match equipment
E Economy mode Excellent fuel economy
performance to the job at hand.
Hydraulic pressure is
L Lifting mode
increased by 7%
Economy Mode Optimum engine rpm,
B Breaker
Economy mode is environmentally friendly. Fuel consumption is operation hydraulic flow
4
PC200-7
HYDRAULIC EXCAVATOR
W
WORKING
ORKING
E
ENVIRONMENT
NVIRONMENT
PC200-7 cab interior is spacious and provides a comfortable working
environment
Pressurized Cab
The air conditioner, air filter and a higher internal air pressure
(6.0 mm Aq 0.2" Aq) prevent external dust from entering the
cab.
PC200-6
Multi-Layer Floor Vibration
Viscous Mount
Pitch vertical direction on graph shows size of vibration.
5
S
SPECIFICATIONS
PECIFICATIONS
6
PC200-7
HYDRAULIC EXCAVATOR
DIMENSIONS
WORKING RANGE
-2
at power max. 14100 kgf/31,080 lb 14100 kgf/31,080 lb
-3
C E D
-4 Arm crowd force 124 kN 101 kN
-5 at power max. 12600 kgf/27,780 lb 10300 kgf/22,710 lb
-6 Bucket digging force 149 kN 149 kN
ISO rating
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity
or 75% of tipping load.
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity
or 75% of tipping load.