Академический Документы
Профессиональный Документы
Культура Документы
0
Maccaferri Stability Analysis of Reinforced Slopes and Walls
Officine Maccaferri S.p.A. - Via Kennedy 10 - 40069 Zola Predosa (Bologna)
Tel. 051.6436000 - Fax 051.236507
Project Title :
Cross Section :
Site :
Folder :
File : dragan
Date : 01/26/2016
TABLE OF CONTENTS
STRATA PROFILES
REINFORCED BLOCKS
Block : TMS1
Block dimensions [m] : Base width = 7.50 Height = 3.00
Block Origin [m] : Abscissa = 20.00 Ordinate = 7.00
Face inclination [] : 0.00
Reinforcements pattern :
Maccaferri - Terramesh System - 8/2.7P - 0.5x0.8
Length [m] = 3.00
Gabion [m]: Height = 0.50 Width = 0.80
Block : TMS2
Block dimensions [m] : Base width = 4.00 Height = 4.00
Back Shift [m] = 0.00 by TMS1
Reinforcements pattern :
Maccaferri - Terramesh System - 8/2.7P -1.0x0.8
Length [m] = 3.00
Gabion [m]: Height = 1.00 Width = 0.80
Block : TMS3
Block dimensions [m] : Base width = 3.00 Height = 3.00
Back Shift [m] = 0.00 by TMS2
Face inclination [] : 0.00
Reinforcements pattern :
Maccaferri - Terramesh System - 8/2.7P -1.0x0.8
Length [m] = 3.00
Gabion [m]: Height = 1.00 Width = 0.80
SURCHARGE LOADS
12
10 TMS1
[m] 14 16 18 20 22 24 26 28 30
Proposal: Date:
01/26/2016
MacStARS W Section: Folder:
Maccaferri Stability Analysis of
Reinforced Slopes and Walls - Rel. 4.0 File: dragan
Internal Stability :
Multiplier combination : A2+M2+R3
Reinforcements active Forces according to Rigid Method
Stability analysis with circular surfaces according to Bishop's Method
Evaluated Safety Factor : 1.060
Block : TMS1
Maccaferri - Terramesh System - 8/2.7P - 0.5x0.8
Y Tb Tp Td Tb/Td Tp/Td
breakage pullout design 1/Fmax
[m] [kN/m] [kN/m] [kN/m]
1.500 50.0 548.3 39.4 1.27 13.92
2.000 50.0 233.7 39.4 1.27 5.93
2.500 50.0 194.4 39.4 1.27 4.93
Block : TMS1
Linear Composites - ParaGrid - 100
Y Tb Tp Td Tb/Td Tp/Td
breakage pullout design 1/Fmax
Block : TMS2
Linear Composites - ParaGrid - 100
Y Tb Tp Td Tb/Td Tp/Td
breakage pullout design 1/Fmax
[m] [kN/m] [kN/m] [kN/m]
0.000 100.0 257.0 61.0 1.64 4.21
Multiplier Class
1.30 Variable unfavourable
1.25 Angle of shearing resistance (Tan phi)
1.25 Effective cohesion
1.00 Weight density
1.00 Tensile strength of reinforcement
1.00 Pullout resistance of reinforcement
1.00 Ground resistance for overall stability
12
10 TMS1
[m] 16 18 20 22 24 26 28 30 32
Proposal: Date:
01/26/2016
MacStARS W Section: Folder:
Maccaferri Stability Analysis of
Reinforced Slopes and Walls - Rel. 4.0 File: dragan
Block : TMS1
Linear Composites - ParaGrid - 100
Y Tb Tp Td Tb/Td Tp/Td
breakage pullout design 1/Fmax
[m] [kN/m] [kN/m] [kN/m]
0.000 100.0 536.6 61.0 1.64 8.80
Multiplier Class
1.30 Variable unfavourable
1.25 Angle of shearing resistance (Tan phi)
1.25 Effective cohesion
1.00 Weight density
1.00 Tensile strength of reinforcement
1.00 Pullout resistance of reinforcement
1.00 Ground resistance for overall stability
MACSTARS W Copyright Maccaferri 1998 Release 4.0 Page 8/11
MACSTARS W Copyright Maccaferri 1998 Release 4.0 Page 9/11
Wall Checks List of
A2+M2+R3
SFsl = 1.670 SFov = 3.688 SFbc = 1.359 Reinforcements
18 TL TMS1 W=7.50 H=3.00 a=0.0
Maccaferri Terramesh System 8/2.7P - 0.5x0.8 3.00 - 0.50
TMS3 Linear Composites ParaGrid 100 6.00 - 1.00
12
10 TMS1
[m] 16 18 20 22 24 26 28 30 32
Proposal: Date:
01/26/2016
MacStARS W Section: Folder:
Maccaferri Stability Analysis of
Reinforced Slopes and Walls - Rel. 4.0 File: dragan
Wall Checks :
Multiplier combination : A2+M2+R3
Considered block : TMS1
Resisting force [kN/m] : 832.61
Active force [kN/m] : 498.52
Sliding class : Sliding resistance
Sliding safety factor : 1.670
Restoring moment [kN*m/m] : 7075.90
Overturning moment [kN*m/m] : 1918.60
Overturning class : Overturning
Overturning safety factor : 3.688
Ultimate bearing pressure computed with Limit Equilibrium method
Multiplier Class
1.30 Variable unfavourable
1.25 Angle of shearing resistance (Tan phi)
1.25 Effective cohesion
1.00 Weight density
1.00 Tensile strength of reinforcement
1.00 Pullout resistance of reinforcement
1.00 Sliding resistance
-----------------------------------------------------------------------------------------------------------------------------------
Officine Maccaferri assumes no responsibilities for the drawings and calculations submitted to the customer
based on the data provided by him, nor it is responsible for the project and site visits that were
subsequently realized without specific assignment.
This technical proposal is carried out on the basis of Officine Maccaferri products with the only purpose of
drawing up the offer. Therefore Officine Maccaferri is not liable for the possible use of this proposal with
products other than those of Officine Maccaferri, or at least not controlled by Officine Maccaferri itself.
------------------------------------------------------------------------------------------------------------------------------------