Академический Документы
Профессиональный Документы
Культура Документы
ViewSonic VG2030m-1
Model No. VS11234
20 Color TFT LCD Display
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranty of merchantability or fitness for any
particular purpose. Further, ViewSonic reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation of ViewSonic to notify any
person of such revision or changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision SM Editing Date ECR Number Description of Changes Editor
Timing Table
Item Timing Analog Digital
1. 640 x 400 @ 70Hz, 31.5kHz Yes Yes
2. 640 x 480 @ 60Hz, 31.5kHz Yes Yes
3. 640 x 480 @ 67Hz, 35.0kHz Yes Yes
4. 640 x 480 @ 72Hz, 37.9kHz Yes Yes
5. 640 x 480 @ 75Hz, 37.5kHz Yes Yes
6. 720 x 400 @ 70Hz, 31.5kHz Yes Yes
7. 800 x 600 @ 56Hz, 35.1kHz Yes Yes
8. 800 x 600 @ 60Hz, 37.9kHz Yes Yes
9. 800 x 600 @ 75Hz, 46.9kHz Yes Yes
10. 800 x 600 @ 72Hz, 48.1kHz Yes Yes
11. 832 x 624 @ 75Hz, 49.7kHz Yes Yes
12. 1024 x 768 @ 60Hz, 48.4kHz Yes Yes
13. 1024 x 768 @ 70Hz, 56.5kHz Yes Yes
14. 1152X 864 @75Hz, 67.5kHz Yes Yes
15. 1152X 870 @75Hz, 70.8kHz Yes Yes
Input Priority
This function is defined the auto detect priority when the display has several inputs. Please refer to the detail flow chart as the
appendix D
Panel Characteristics:
st
1 Source Panel A201P1
Type TN Technology
Active Size 408.24 (H) x 306.18(V)
Pixel Arrangement RGB Vertical Stripe
Pixel Pitch 0.2916 mm
GLASS TREATMENT Anti Glare (Hard coating 3H)
# OF BACKLIGHTS 4 CCFL edge-light (2 top / 2 bottom)
BACKLIGHT LIFE 50,000 Hours (Min)
Luminance Condition: 300 cd/m2 (Typ after 30 minute warm up)
CT = 6500K, Contrast = Max, 200 cd/m2 (Min after 30 minute warm up)
Brightness = Max
Brightness Uniformity 77%(typ); 67% (min)
Contrast Ratio 500:1 (Typ), 350:1 (Min)
Color Depth 16.2 million colors (6 bit +FRC panel)
Viewing Angle (Horizontal/ vertical) 150/130 (typ), 130/110(min) @ CR>10,
170/150 (typ), 150/130 (min) @ CR>5
Response Time 8 ms (Tr= 2 ms, Tf = 6 ms) (Typ)
10%-90% @ Ta=25C 18 ms (Tr= 7 ms, Tf = 11 ms) (Max)
Panel Defects Please see Panel Quality Specifications.
Factory Defaults
Item Defaults Item Defaults
Contrast 70% Sharpness 100%
Brightness 100% OSD H. Position 50%
Volume 50% OSD V. Position 50%
Balance N/A OSD Time Out 15 Sec
Bass N/A OSD Background On
Treble N/A OSD PIVOT N/A
Color Temperature 6500K Resolution Notice on
720x400/640x400 720x400
Display Size
Horizontal Display Size, Primary Preset Full Screen
Vertical Display Size, Primary Preset Full Screen
Luminance
Lv (Max) Condition:
Brightness / Contrast = 100% Lv (Max) = The Luminance requirement of
section 4-7 TFT LCD PANEL
CCT = USER COLOR (R/G/B=100%)
Lv (9300K) Condition:
Brightness / Contrast = Default Lv (9300K) / Lv (Def) x 100% > 70%
CCT = 9300K
Lv (5400K) Condition:
Brightness / Contrast = Default Lv (5400K) / Lv (Def) x 100% > 75%
CCT = 5400K
Lv (Brightness) Condition:
Contrast = 100% Lv(Brightness=0%)/Lv(Brightness=100%) x 100% 55%
Saturation
Contrast = Default
Brightness = Default 2 level saturation (Max)
TEST PATTERN = 64-GRAY
Contrast = Default
Brightness = 100% No visible saturation
Test pattern = 32 gray
Main Menu
with OSD controls
Displays the Main Menu or exits the control screen and saves
adjustments.
NOTE: All OSD menus and adjustment screens disappear automatically after about 15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.
3. After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
Control Explanation
Auto Image Adjust sizes and centers the screen image automatically.
Contrast adjusts the difference between the image background (black level)
and the foreground (white level).
Input Select toggles between inputs if you have more than one computer
connected to the VG2030m.
Audio Adjust
Volume increases the volume, decreases the volume, and mutes the audio.
Mute temporarily silences audio output.
Color Adjust provides several color adjustment modes, including preset color
temperatures and a User Color mode which allows independent adjustment of
red (R), green (G), and blue (B). The factory setting for this product is 6500K
(6500 Kelvin).
9300K-Adds blue to the screen image for cooler white (used in most office
settings with fluorescent lighting).
6500K-Adds red to the screen image for warmer white and richer red.
5000K-Adds blue and green to the screen image for a darker color.
User Color Individual adjustments for red (R), green (G), and blue (B).
1. To select color (R, G or B) press button [2].
2. To adjust selected color, pressSandT.
Important: If you select RECALL from the Main Menu when the product is
set to a Preset Timing Mode, colors return to the 6500K factory preset.
Information displays the timing mode (video signal input) coming from the
graphics card in the computer, the LCD model number, the serial number, and
the ViewSonic website URL. See your graphics cards user guide for
instructions on changing the resolution and refresh rate (vertical frequency).
NOTE: VESA 1400 x 1050 @ 60Hz (recommended) means that the resolution
is 1400 x 1050 and the refresh rate is 60 Hertz.
Fine Tune sharpens the focus by aligning text and/or graphics with pixel
boundaries.
NOTE: Try Auto Image Adjust first.
Language Select allows the user to choose the language used in the menus and
control screens.
If you enable the Resolution Notice shown above and your computer is set at a
resolution other than 1400 x 1050, the following screen appears.
OSD Position allows the user to move the OSD menus and control screens.
OSD Timeout sets the length of time the OSD screen is displayed. For example,
with a 30 second setting, if a control is not pushed within 30 seconds, the
display screen disappears.
OSD Background allows the user to turn the OSD background On or Off.
Memory Recall returns the adjustments back to factory settings if the display is
operating in a factory Preset Timing Mode listed in the Specifications of this
manual.
Vertical:
Active Time: 1050 lines Blanking Time: 39 lines
Sync Offset: 3 lines Sync Pulse Width: 4 lines
Border: 0 lines Frequency: 59.98 Hz
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VG2030m
Vertical:
Active Time: 1050 lines Blanking Time: 39 lines
Sync Offset: 3 lines Sync Pulse Width: 4 lines
Border: 0 lines Frequency: 59.98 Hz
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VG2030m
4. DCC
Test Patten: EDID program
-Make sure it can pass test program.
6. Window BG
Test Signal: 1280*1024@60Hz
Test Pattern:
7. 25 Gray
Test Signal: 1280*1024@60Hz
Test Pattern:
8. 50 Gray
Test Signal: 1280*1024@60Hz
Test Pattern:
9. White Box
Test Signal: 1280*1024@60Hz
Test Pattern:
11. RED
Test Signal: 1280*1024@60Hz
Test Pattern:
12. Green
Test Signal: 1280*1024@60Hz
Test Pattern:
13. Blue
Test Signal: 1280*1024@60Hz
Test Pattern:
14. Gray_Scale_0-100_V64
Test Signal: 1280*1024@60Hz
Test Pattern:
Figure3 Figure4
Figure5 Figure6
Figure7 Figure8
Hardware:
PC or Notebook , Parallel(Printer) cable , ISP tool( Fig 1)
Software:
ISP driver .
If the O.S. was Win2000 or Win XP please have to install PORT95NT.exe
Figure 1
In order to ensure can execute ISP program, please set BIOS in PC or Notebook as Fig 2
Fig 2
2. Install ISP
2.1 User could download ISP driver and PORT95NT install file from Myson Century website( //www.myson.com.tw )
2.2 After extracting the zip file, the total files list as Fig 2.2, and double click the file of setup.exe to install.
Fig 2.2
Fig 2.3
2.4 Keep default setting or press Change button for selecting the path that you want , and then pressNextbutton to
continue, see Fig 2.4.
Fig 2.4
2.5 Press Install button to continue, see Fig 2.5
2.6 The Installer Information shows package warning, press Ignore button to continue,see Fig 2.6.
Fig 2.6
Fig 2.7
3. ISP security code
3.1 After installation, we could find the shortcut in the setting path or the program bar (default setting),see Fig 3.1.
Fig 3.1
Fig 3.2
3.3 The warning is used to remind user of that different CPU rate may cause ISP function fail(it is limited by IIC protocol),
press button, see Fig 3.3.
Fig 3.3
Fig 3.4
Fig 3.5
Fig 3.6
Fig 3.7
4.2 If user changes the MTV type, it must load file again, or the buffer of load file will be cleared.
4.3 CRC (cyclic redundancy check): the host can check CRC registers result instead of reading every byte in flash. The
message of Check MCU CRC OK means that the Host verify ok for the progress of program.
Fig 4.1
Fig 5.1
Fig 5.2
9. Adaptor Linking
ISP Adaptor
Connect with
The Monitor Set Printer Cable PC/HOST
25Pins to 25Pins
Connect with
VGA Cable
15Pins to 15Pins
1. Packing Procedure
1.2 Put the monitor in the PE bag and seal the bag with tape. (Figure 2)
Figure1 Figure2
1.3 Put the cushion into the carton then place the monitor on the cushion. (Figure 3)
1.4 Put the cushion then place all the accessories into the carton. As last, close the carton
and seal it with tape. (Figure 4)
Figure3 Figure4
Step 1 :
Remove the Stand Cover.
Step 2 :
Press the connect place.
Step 3 :
Remove the Stand Assy
Step 4 :
Completed.
Step 1 :
Loose and remove 4 screws.
Step 2 :
Separate Bezel hooks to take
Bezel and Rear Cover apart.
Step 3 :
Remove Rear Cover.
Step 4 :
Completed.
Step 2 :
Lift up LCD module and remove bezel.
Step 4 :
Remove 2 pieces of Backlight wires.
Step 6 :
Loose and remove 4 screws.
Step 7 :
Loose and remove 2 screws.
Step 9 :
Loose and remove 2 screws.
Step 10 :
Remove the PCBA Cover
Step 1 :
Loose and remove 4 screws.
Step 2 :
Remove Lips Board
Step 4 :
Remove 2 pieces of FFCs.
Step 5 :
Loose and remove 4 screws.
Step 6 :
Remove AD PCBA.
Step7 :
Completed.
Step 1 :
Place new AD Board.
And fasten 4 fixed screws.
Step 3 :
Insert 2 pieces of FFCs .
Step 4 :
Insert FFC.
Step 5 :
Insert new Lips Board.
Step 6 :
Fasten 4 fixed screws.
Step 7 :Completed.
Step 1 :
Remove the FFC
Step 2 :
Separate both Audio Cables.
Step 3 :
Loose and remove 2 screws.
Step 4 :
Remove the FFC and OSD board.
Step 5:
Completed.
Step 1 :
Place New OSD Board and insert
FFC.
Step 2 :
Fasten 2 screws.
Step 3 :
Insert Audio cables
Step 4:
Completed.
Step 1 :
Join the PCB Cover.
Step 2 :
Fasten 2 fixed screws.
Step 3 :
Fasten 2 fixed screws.
Step 4 :
Fasten 2 fixed screws.
Step 7 :
Insert 2 pieces of Backlight wires.
Step 8 :
Insert 2 pieces of Backlight wires.
Step 9 :
Join LCD module and remove bezel.
Step 10 :
Insert FFC.
Step 11 :
Completed.
Step 2 :
Fasten 4 fixed screws.
Step 3 :
Place the Stand Assy.
Step 4 :
Join the Stand Cover.
Step 5 :
Completed.
Flash Dots
Abnormal
Display Bright Dot
Dark Dot
Backlight
Light Leakage
Brightness spot
Particle
Dot Defect
Image Remain
Group Bright
Dots
Others Cosmetics
Defect
NG
Next Step TEST
A
Completed
Display Noise
Beat Display
Flicker
Check Panel Panel Change
Beat Display
Shut Down
AD/B Change
Display Wave
Check PCBA Power/B Change
CNT/B Change
NG
Next Step TEST
B Completed
B
Display White
Check PCBA AD/B Change
Out
Power/B Change
Booting Delay Check PCBA
Inverter/B Change
Brightness
OSD/B Change
Even
Abnormal Power/B Change
Check PCBA
Inverter/B Change
Beat Display
No Backlight Check Panel Panel Change
No signal
AD/B Change
NG
Next Step TEST
C
Completed
Horizontal
Line Defect
Vertical
Weak Line AD/B Change
Check PCBA
Horizontal
Weak Line
Vertical
Check Panel Panel Change
Band Defect
Horizontal
Band Defect
Power Saving
Display Check PCBA AD/B Change
Abnormal
AD/B Change
Power/B Change
Peculiar Smell Check PCBA
Inverter/B Change
NG
Next Step TEST
Completed
AD/B Change
Power/B Change
Check Wire
OSD Cable
Check Wire
AC Power Change
DC Power CNT
Cable Change
Check Adapter Adapter Change
AD/B Change
LED Abnormal
OSD Cable Change
Check Wire
LED Loss DC Power CNT
Cable Change
LED Flicker
Adapter Change
NG
Next Step TEST
Completed
OSD No
D-sub cable Change
Display
Check Wire OSD cable Change
Loudspeaker
L/R Same Check Loudspeaker
Change Completed
Volume
Loudspeaker
Noise
CNT/B Change
NG
Next Step TEST
Completed
Check the information in this section to see if the problems can be solved before requesting repair.
NoteThe consumers are only allowed to solve the problems described as below. Any unauthorized
product modification, or failure to follow instructions supplied with the product will end the
warranty immediately.
z No image
Make sure power button is ON.
Check whether the LCD monitor and computer power cords are plugged and whether there is a
supply of power.
z No Signal Input
Check the signal connection between the computer and LCD monitor.
z Out of Range
Check the computer image output resolution and frequency and compare the value with the preset
values (Please refer to [Appendix-Display Mode]).
z Fuzzy Image
Adjust Phase.
z Irregular image
Check the signal connection between the computer and LCD monitor.
Perform Auto Adjust.
z Distorted image
Reset the LCD monitor
Take off extra accessories (such as signal extension cord).
z Image is not centered
Use OSD Image Menu to adjust H_Position and V_Position.
Check image size setting.
Perform Auto Adjust.
z Uneven color
Use OSD Color Menu to adjust color setting.
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to
eliminate repeated cross checks of each item between this version and prior versions.
3.3V
DVI-D 5V
Digital Video Main Board
LCD Module
D-sub 12V
Analog Video
Signal
LDO
DC-5V DC-12V
B3 B6 B8 PANEL_INTERFACE
BR2N
DSUB_DET BR2N BR2P BR2N
DSUB_DET SOG DSUB_DET BR2P BR1N BR2P
SOG DDCA_DAT SOG BR1N BR1P BR1N
VGADDCA_DAT DDCA_DAT BR1P BR1P
DDCA_CLK BR0N
V5A DDCA_CLK RIN DDCA_CLK BR0N BR0P BR0N
VGA_5V RIN GNDR RIN BR0P BR0P
VGA_5V GNDR GIN GNDR BG2N
GIN GNDG GIN BG2N BG2P BG2N
GNDG BIN GNDG BG2P BG1N BG2P
BIN GNDB BIN BG1N BG1P BG1N
V5A_ESD GNDB HSYNC GNDB BG1P BG0N BG1P
V5A_ESD HSYNC VSYNC HSYNC BG0N BG0P BG0N
VSYNC VSYNC BG0P BG0P
B4 BB2N
BB2N BB2P BB2N
BB2P BB1N BB2P
BB1N BB1P BB1N
DDCD_CLK BB1P BB0N BB1P
V5A_ESD DDCD_CLK DDCD_DAT DDCD_CLK BB0N BB0P BB0N
DDCD_DAT R+ DDCD_DAT BB0P BB0P
V5A R+ R- R+ FR2N
R- R- FR2N FR2N
DVI G+
G+
G+ FR2P
FR2P
FR2P
G- FR1N
DVI_5V G- B+ G- FR1N FR1P FR1N
DVI_5V B+ B- B+ FR1P FR0N FR1P
B- CLK+ B- FR0N FR0P FR0N
B1 CLK+ CLK- CLK+ FR0P FR0P
CLK- CLK- FG2N
FG2N FG2P FG2N
OSD FG2P FG2P
FG1N
FG1N FG1P FG1N
FG1P FG0N FG1P
FG0N FG0P FG0N
LED_OR FG0P FG0P
LED_OR LED_GL LED_OR FB2N
LED_GL LED_GL SCALER FB2N FB2N
TURBO FB2P
TURBO MENU TURBO FB2P FB1N FB2P
MENU LEFT MENU FB1N FB1P FB1N
LEFT RIGHT LEFT FB1P FB0N FB1P
RIGHT AUTO RIGHT FB0N FB0P FB0N
AUTO POWER AUTO FB0P FB0P
POWER POWER FCKN
V33C FCKN FCKP FCKN
FCKP FSTH FCKP
AUDIO_ON FSTH FSTH
INV_ON/OFF AUDIO_ON BCKN
DCDC_ON/OFF INV_ON/OFF BCKN BCKP BCKN
PANEL_ON/OFF DCDC_ON/OFF BCKP BSTH BCKP
AUDIOR- VCM_PWM PANEL_ON/OFF BSTH BSTH
AUDIOR- VOL_ADJ VCM_PWM STB
AUDIOR+ INV_ADJ VOL_ADJ STB POL STB
AUDIOR+ AUD_DET INV_ADJ POL POL
AUDIOL- AUD_DET CPV
AUDIOL- CPV STV CPV
AUDIOL+ STV OE STV
AUDIOL+ DVI_5V OE OE
B5
GVOFF
GVOFF GVOFF
B2 VCTRL VCTRL
INVERTER I/F V5A
V5A
V12A
V12A
AUDIOL+ V18C
Vref V33C
AUDIOL- DVI_5V Vref Vref VCM_PWM
V5A PANEL_ON/OFF VCM_PWM
AUDIOR+ PANEL_ON/OFF
VGA_5V DCDC_ON/OFF
AUDIOR- DCDC_ON/OFF
AUD_DET V12A
AUD_DET V12A
V33C
V18C
LED_GL V18C
V5A
V33C
V12A
V12A
INV_ON/OFF
INV_ON/OFF
INV_ADJ
INV_ADJ
ViewSonic Corporation
Model
Title BLOCK
Date Rev:
103
115
117
0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7
44
50
34
52
60
14
67
95
12
97
68
4
U1 GND GND
11 VCTRL
AVDD_DVI
AVDD_DVI
VDDP
VDDP
VDDP
VDDP
VDDP
VDD_OTP
AVDD_MPLL
AVDD_MPLL
AVDD_PLL
AVDD_ADC
VDDC
VDDC
VDDC
VCTRL
Close to respective power Pins
NC/LVACKP/NC 107
RIN RIN 59 108 GND
GNDR RIN0P NC/LVACKM/NC FB0N
GNDR 58 RIN0N RA1P/LVA2P/RA2 109 FB0N
GIN GIN 56 110 FB0P VDVI
GIN0P RA1N/LVA2M/RA3 FB0P L11 VDVI1
GNDG GNDG 55 111 FB1N
GIN0N RA2P/LVA1P/RA4 FB1N
SOG SOG 57 112 FB1P 1 2 1
SOGIN0 RA2N/LVA1M/RA5 FB1P TP
BIN BIN 54 113 FB2N
BIN0P RA3P/LVA0P/RA6 FB2N
GNDB GNDB 53 114 FB2P
BIN0N RA3N/LVA0M/RA7 FB2P
HSYNC HSYNC 63 TP
VSYNC HSYNC0 FG0N C65
VSYNC 64 VSYNC0 GA1P/NC/GA2 98 FG0N
DDCA_DAT 65 99 FG0P 1206/10u/16V/X/PbF C66 C67
DDCA_DAT DDCA_SDA/RS232_Tx GA1N/NC/GA3 FG0P 0603/100n/25V/7 0603/100n/25V/7
DDCA_CLK 66 100 FG1N
DDCA_CLK DDCA_SCL/RS232_Rx GA2P/NC/GA4 FG1N
101 FG1P
GA2N/NC/GA5 FG1P
R+ 39 105 FG2N
R+ RX2P GA3P/LVA3P/GA6 FG2N
R-
R- 40 RX2N GA3N/LVA3M/GA7 106 FG2P
FG2P Close to respective power Pins
G+ 42 GND
G+ RX1P
G- 43 89 FR0N
G- RX1N BA1P/NC/BA2 FR0N
B+ 45 90 FR0P VMPLL
B+ RX0P BA1N/NC/BA3 FR0P
B- 46 91 FR1N
B- RX0N BA2P/NC/BA4 FR1N VMPLL1
CLK+ 48 92 FR1P L12 HCB2012KF-420T40
CLK+ RXCKP BA2N/NC/BA5 FR1P
CLK- 49 93 FR2N 1 2 1
CLK- RXCKN BA3P/NC/BA6 FR2N TP
DDCD_DAT 36 94 FR2P
DDCD_DAT DDCD_SDA BA3N/NC/BA7 FR2P
DDCD_CLK 37
DDCD_CLK DDCD_SCL
9 BB0N
RB1P/NC/RB2 BB0N
10 BB0P C74
RB1N/NC/RB3 BB0P
15 BB1N 1206/10u/16V/X/PbF C75
RB2P/NC/RB4 BB1N 0603/100n/25V/7
R124 0603/390R/1%
51 16 BB1P
AVDD REXT RB2N/NC/RB5 BB1P
17 BB2N
RB3P/NC/RB6 BB2N
VCC33 18 BB2P
RB3N/NC/RB7 BB2P
62 REFP Close to respective power Pins
C91 2 BG0N GND
GB1P/NC/GB2 BG0N
3 BG0P VPLL
GB1N/NC/GB3 BG0P
0603/100n/25V/7 61 5 BG1N
REFM GB2P/NC/GB4 BG1N L13 VPLL1
6 BG1P
GB2N/NC/GB5 BG1P
7 BG2N 1 2 1 VDDC
GB3P/NC/GB6 BG2N TP
V5A TSUM57AK GB3N/NC/GB7 8 BG2P
BG2P
VCC18
U2 FCKP L17 VDDC1
CLKAP/LVB3P/LHSYNC 118 FCKP
8 2 70 119 FCKN C76 1 2 1
VDD SDO SDO CLKAN/LVB3M/LVSYNC FCKN V18C TP
C90 WP 7 1 71 120 BCKP 1206/10u/16V/X/PbF C77
HOLD# CE# SCZ CLKBP/LVBCKP/LCK_ODD BCKP 0603/100n/25V/7
WP 3 6 72 121 BCKN
WP# SCK SCK CLKBN/LVBCKM/LDE BCKN
0603/100n/25V/7 4 5 73 122
VSS SDI SDI NC/LVB2P/NC C84
NC/LVB2M/NC 123
C80 124 BR0N 1206/4.7u/16V/Y C85 C86 C87
BB1P/LVB1P/BB2 BR0N
1206/10u/16V/X/PbF GND Pm25LV512
BB1N/LVB1M/BB3 125 BR0P
BR0P Frame inversion : GPO5 Close to respective power Pins 0603/100n/25V/7 0603/100n/25V/7 0603/100n/25V/7
126 BR1N
19
BB2P/LVB0P/BB4
127 BR1P
BR1N , GPO6 POL ( GND
RST BB2N/LVB0M/BB5 BR1P
BB3P/NC/BB6 128 BR2N
BR2N GPO5 GVOFF), GPO0 AVDD Close to respective power Pins
1 BR2P
GVOFF (GVON)
0603/10K/5%
80 BSTH 1 2 1
ESP BSTH TP
32 81 FSTH VCC33 VCC33 VCC33
XIN OSP FSTH
C94 0603/22p/50V/N 88 GVOFF
GPO0 GVOFF
Y1 87 STB
0603/10K/5%/open
GPO1 STB
14.31818MHz 86 STV C78
GPO2 STV
33 85 CPV 1206/10u/16V/X/PbF C79
0603/10K/5%
0603/10K/5%
XOUT GPO3 GPO51 CPV 0603/100n/25V/7
GND C93 0603/22p/50V/N 84 OE
R111
R122
R113
GPO4 OE V12A
GPO5 83 1 TP
82 POL
GPO6 POL
GND V5A
AUDIO_ON
GPIO_P22 75 GND Close to respective power Pins
GPIO_P23 74
VCC33 26
0603/20K/1%/OPEN
GPIO_P03
R209
AUD_DET V5A
35 R103 0603/100R/5% AUTO DVI (R,G,B ) 5V,12v
0603/10K/5%/OPEN
R118 R0603/OPEN GPIO_P16/PWM2 R104 0603/100R/5%
102 69
0603/30K/5%
MODE[0] GPIO_P15/PWM0 POWER
R119 R0603/OPEN 104 78
R79
OPEN/R0603
MODE[1] PWM2/GPIO_P24 VCM_PWM
79
R210
R112
DVI
GPIO_P27/PWM1 PANEL_ON/OFF
DSUB
GPIO_P12 20 INV_ON/OFF
21
0603/10K/5%
0603/10K/5%
PWM1/GPIO_P25 INV_ADJ
GND DVI 0603/0R/5%/open
R114
R115
DVI_5V
22 GND R120 0603/10K/5% R214
RSTN SAR1 R110 0603/100R/5%
GPIO_P00/SAR1 23 MENU
24 SAR2 R117 0603/100R/5% LEFT
GPIO_P01/SAR2 R121 0603/100R/5% C88 0603/100n/25V/7
GPIO_P02/SAR3 25 RIGHT
27 LED_GL DSUB 0603/0R/5%/open DSUB_DET
GPIO_P06 LED_GL
28 LED_OR GND R213
GPIO_P07 LED_OR
PWM0/GPIO_P26 29 VOL_ADJ
GND 30 R105 0603/100R/5% TURBO VCC33
GPIO_P13
GPIO_P14 31
VCC33
77
0603/10K/5%
0603/10K/5%
DDCROM_SCL
76
R108
R109
GND
GND
GND
GND
GND
GND
DDCROM_SDA
C81
0603/10K/5%
0603/10K/5%
0603/100n/25V/7
R106
R107
13
38
41
47
96
116
U7 DCDC_ON/OFF
DCDC_ON/OFF
AT24C16AN-10SU-2.7/RoHS
3
8 VCC A0 1
R1000603/100R/5% R102 1 Q7 C89
GND R101 0603/100R/5% 7 2 0603/4.7K/0.1%/RoHS MMBT3904-F 0603/100n/25V/7
WP A1
need to modify, the SAR is
2
6 3
6 bits and the max voltage SCL A2
is 1.8V 5 4 POWER_ON-OFF
SDA GND
erased, Write Protect
GND
GND
U5
VCC33
PIN VOLTAGE VCC33
4 NC VSS 3 GND
RIGHT 1.77V C152 2 Vref
C150 VDD
0805/10u/6.3V/5/open R127 5 1 VCC33
POWER 1.24V 0603/20K/1%/OPEN 0805/10u/6.3V/5/open R137 CD OUT
0603/20K/1%/OPEN
GND C70
AUTO 0.47V SAR1 R128 GND 0603/10n/25V/7/RoHS RN5VD40AA/RoHS
LEFT
1
3
C7 Q1 R14 0603/4.7K/5%/RoHS INV_ON/OFF1
2N7002/RoHS 1 INV_ON/OFF 1
INV_ADJ TP
0603/1u/10V/Y/open Q2
3
0603/4.7K/5%/RoHS C8 2N7002/RoHS [GND_INV] GND
R10 INV_ADJ1
0603/0.1u/25V/open 0603/4.7K/5%/RoHS
1 INV_ADJ 1
INV_ON/OFF TP
GND
2
R11
0603/10K/5%/OPEN
V5A
LP1
GND
V5A
FBMJ2125HS420/PbF
+ CP2 CP3
3
8 1 2 V12A 1
VOL Q18
7 MUTE Q16
3216FF/1206/3A/RoHS 1 LED_GL
6
1
AUD_Shutdown 2N7002/RoHS
0603/10K/5%/RoHS
5
2
R182
AUDIOR-
0603/0R/5%/RoHS/OPEN
4 R22 CP4 CP5 CP6 C161
3 AUDIOR+
LV470M025E055R 1210/4.7u/25V/5/RoHS
1210/4.7u/25V/5/RoHS 0603/100n/25V/Y/RoHS
2 AUDIOL-
2
1 AUDIOL+
R183 GND GND
CN4 GND 0603/1K/5%/RoHS
Header2X8FR2.54 MUTE
GND
AUD_Shutdown
3
TP0610K/PbF 1
OPEN/0603 Q4
Q3 1 AUDIO_ON
0603/10K/5%/RoHS 2N7002/RoHS
3
2
R18 VOL
3
C3
0603/100n/25V/Y/RoHS
1 Q5 R17
VOL_ADJ
C6 C5
2
GND
MUTE
R20
GND
0603/0R/5%/RoHS/OPEN
ViewSonic Corporation
Model
Title
Date Rev:
DVI_5V
1 0603/0R/5%/open
0603/0R/5%/open
VCTRL
R202
0603/51R/1%
R1 R5
V18C
2
D7
BAV70W/open
V18C
3 Q8 C160
1 4 0805/4.7u/16V/Y
B GND
3 E C 2
V33C1
1
H2907AS
R203
TP
TP
0603/2K/1%
2
FBMJ2125HS420/PbF
U4 V18V1
1
L18 D9 LM1117MPX-3.3/RoHS D35
1 2 3 V33C
V5A VIN VOUT 2 V33C 1N4148WS-F
VOUT 4
GND
GND
B240A-F (SCALER VCC)
1
1
C42 C44 R204
C43 C45
1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS 1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS 0603/100R/1% Heat-Sink
Vref
GND
V33P1
TP (POWER FOR SCALER)
U6
1
L9 FBMJ2125HS420/PbF LM1117MPX-3.3/RoHS
3 2 V33P
V5A VIN VOUT V33P
4
GND
VOUT
(Panel VCC)
1
GND
ViewSonic Corporation
Model
Title
Date Rev:
DDCA_DAT 11 1
0603/0R/5%/OPEN 6 R21 0603/56R/1% C9 0603/47n/16V/7/RoHS
RIN
12 2
7 R34 0603/56R/1% C10 0603/47n/16V/7/RoHS
GIN
13 3
8 R23 0603/56R/1% C11 0603/47n/16V/7/RoHS
BIN
14 4
9 R24 0603/470R/1% C15 0603/1n/16V/7
SOG
15 5 R78 R30 R29
10 0603/75R/1% 0603/75R/1% 0603/75R/1%
CN7
89263-6762
3
1
D1 D2 R144 D24 1 1
0603/0R/5%/OPEN BAV99W/RoHS D25 D5
0603/10p/varistor/OPEN BAV99W/RoHS BAV99W/RoHS
0603/10p/varistor/OPEN
V5A_ESD GND
2
V5A_ESD
2
GND C157 C158 C159
DDCA_CLK 0603/100n/25V/X/RoHS 0603/100n/25V/X/RoHS 0603/100n/25V/X/RoHS
GND : Mstar
HSI L20 0603/0R/5%/RoHS R57 0603/1K/1%/RoHS
HSYNC C100 ,C128
2
D32 ,R57 0.68
UDZSF-5.6B/PbF R55 C128 C126 k 1k,
0603/33p/50V/N/RoHS 0603/33p/50V/N/RoHS/open
1
0603/2.2K/5%/RoHS
R540.1K1k,
C126 ,C127 OPEN
GND
D33
R129 C127
C100
UDZSF-5.6B/PbF
0603/33p/50V/N/RoHS/open HSYNC
1
0603/2.2K/5%/RoHS HSYNC1 TP
1
0603/220p/50V/N
GND 1 VSYNC
VSYNC1 TP
GNDGND GND
R64 0603/100R/5%/RoHS
DDCA_CLK
R131 0603/100R/5%/RoHS
DDCA_DAT
DSUB_DET
VGA_5V
2VGA_5V
L8 R133
BK1608LL121/PbF 0603/10R/5%/RoHS V5A
V5A
1
0603220KV05T/RoHS
C129 D30 R135 0603/10K/5%/RoHS
0603/100n/25V/X/RoHS BZT52-C5V6S/RoHS
1
Title
Date Rev:
2
D14 D16
2
18 UDZSF-5.6B/PbF
DAT0+ C162 C163 C26 BAV70W C25
DAT0- 17
10 0603/100n/25V/Y/RoHS R50 R51
DAT1+
3
9 D13 0603/100p/50V/N D15 U10 0603/3.9K/5%/RoHS 0603/100n/25V/Y/RoHS
DAT1- 0603/100p/50V/N UDZSF-5.6B/PbF R48 0603/10K/5%/RoHS
DAT2+ 2 1 NC VCC 8
1
1
1 2 NC R49 0603/47K/5%/RoHS 0603/10K/5%/RoHS
DAT2- VCLK 7
DAT3+ 13 3 NC SCL 6
12 UDZSF-5.6B/PbF 4 GND
DAT3- SDA 5
DAT4+ 5
4 AT24C02-10TU-1.8/RoHS
DAT4- 0603/10R/5%/RoHS GND
DAT5+ 21 GND
20 R40
DAT5- B+
23 R41 0603/10R/5%/RoHS
clk+ B-
24 R42 0603/10R/5%/RoHS
clk- G+
R43 0603/10R/5%/RoHS
G-
R44 0603/10R/5%/RoHS
R+
2DS-0342-001 R45 0603/10R/5%/RoHS
R-
R46 0603/10R/5%/RoHS
CLK+
GND D18 D19 D20 D21 D22 D23 D3 R47 0603/10R/5%/RoHS
CLK-
3
3
BAV99W/RoHS BAV99W/RoHS BAV99W/RoHS BAV99W/RoHS D4
BAV99W/RoHS BAV99W/RoHSBAV99W/RoHS BAV99W/RoHS
1 1 1 1 1 1 1 1
L5
C28 C29 C30 C31 C32 C33 C34 C35
V5A 0603/0R/5% V5A_ESD
2
2
2
GND
ViewSonic Corporation
Model
GND Title
Date Rev:
5
6
7
8
5
6
7
8
RP46 RP47
0603*4/10K/5%/RoHS 0603*4/10K/5%/RoHS
4
3
2
1
4
3
2
1
Bead Array LP8,LP9,LP11=>modified RoHs
CN3
LP6 1 8 BK32164M121
MENU 15
LEFT 2 7 14
RIGHT 3 6 13
TURBO 4 5 12
LP7 1 8 BK32164M121
AUTO 11
LED_O 2 7
LED_G 10
3 6 9
POWER 4 5 8
L1 7
6
AUDIOR- 1 2 5
MPZ1608S221/RoHS 4
3
L2 2
1
4
3
2
1
4
3
2
1
V33C 1 2
AUDIOR+
V33C
V33C CP7 CP8 MPZ1608S221/RoHS HEADER 10_2/RoHS
0603*4/100n/25V/RoHS 0603*4/100n/25V/RoHS
L3
R36
R62 1 2
AUDIOL-
5
6
7
8
5
6
7
8
0603/10K/5%/RoHS 0603/1K/5%/RoHS/OPEN GND
R7
MPZ1608S221/RoHS
L4
2
1 0603/0R/5%/RoHS 1 2
TP0610K/PbF AUDIOL+
Q13
Q12 1 MPZ1608S221/RoHS
LED_OR
2N7002/RoHS/OPEN
3
C2
R3 0603/100n/25V/Y/RoHS/OPEN
0603/249R/1%/RoHS GND
GND GND
LED_O
V33C V33C
R2
R63 0603/1K/5%/RoHS/OPEN
0603/10K/5%/RoHS
R8
2
1 0603/0R/5%/RoHS
TP0610K/PbF Q15
Q14 1 LED_GL
2N7002/RoHS/OPEN
3
R4 C1
0603/249R/1%/RoHS 0603/100n/25V/Y/RoHS/OPEN
Title OSD
Date Rev:
CN2
STV1 CN1
36 36
STV 1 35 36 36
FSTH 35 35
FSTH 34 34 35
33 BB2P 34 34
FB2P 33 33
32 BB2N 33
FB2N 32 32
31 BB1P 32
CPV1 FB1P 31 31
30 BB1N 31
FB1N 30 30
CPV 1 29 BB0P 30
FB0P 29 29
28 BB0N 29
FB0N 28 28
27 27 28
26 BG2P 27 27
FG2P 26 26
25 BG2N 26
OE1 FG2N 25 25
24 BG1P 25
FG1P 24 24
OE 1 23 BG1N 24
FG1N 23 23
22 BG0P 23
FG0P 22 22
21 BG0N 22
FG0N 21 21
20 20 21
STB1 20
FCKP 19 BCKP 20
STB 1 18 BCKN 19 19
FCKN 18 18
17 17 18
STB 16 BR2P 17 17
STB 16 16
POL 15 BR2N 16
POL1 POL 15 15
14 BR1P 15
POL 14 BR1N 14
1 FR2P 13 13 14
12
19 BR0P 13 13
FR2N 12 12
11 BR0N 12
FR1P 11 11
FR1N 10 10 11
BSTH 10
FR0P 9 9 BSTH 10
PANEL_ON/OFF1 9
FR0N 8 8 9
PANEL_ON/OFF 1 7 8 8
V33P OE 7 GVOFF 7
OE 6 6 V5A GVOFF 7
CPV VCM_PWM 6
CPV 5 5 VCM_PWM 6
GND STV GND DCDC_ON/OFF 5
STV 4 4 DCDC_ON/OFF 5
PANEL_ON/OFF 4
3 3 PANEL_ON/OFF 4
DCDC_ON/OFF1 L7 FBMJ2125HS420/PbF 3
2 2 V5A 3
DCDC_ON/OFF 1 VCC 1 2
V33P 1 2
1 1
IL-FHR-F36S-HF/RoHS IL-FHR-F36S-HF/RoHS
C118
0603/100n/25V/X/RoHS C119 C120
VCM_PWM1 1206/22u/16V/Y/RoHS 0603/100n/25V/7/RoHS
VCM_PWM 1
GND
V12A
GND
V12A
GVOFF1
GVOFF 1 C121 C122
1206/4.7u/35V/Y/E
FSTH1 0603/100n/25V/X/RoHS
FSTH 1
GND
BSTH1
BSTH 1
S Board X Board
RA N/P --> BA P/N
GA N/P --> GA P/N
BA N/P --> RA P/N
ViewSonic Corporation
Model
Title
Date Rev:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit Excellent Good Fair Bad
1. Precautions and Safety Notices
2. Specification
4. Circuit Description
5. Adjustment Procedure
9. Block Diagrams
C. Do you have any other opinions or suggestions regarding this service manual?