Академический Документы
Профессиональный Документы
Культура Документы
Title page
Alcatel-Lucent 9326
digital 2U Node B | UA08.1
Maintenance Guide
NN-20500-110
Issue 08.06 | January 2013
Alcatel-Lucent Proprietary
Use pursuant to applicable agreements
Use pursuant to applicable agreements
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2013 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Alcatel-Lucent Proprietary
Use pursuant to applicable agreements
Contents
Prerequisites ..................................................................................................................................................................................... xx
2 Safety statements
....................................................................................................................................................................................................................................
Corrective maintenance activity .......................................................................................................................................... 3-2
3-2
....................................................................................................................................................................................................................................
North American regulatory requirement compliance ................................................................................................. A-4
A-4
Index
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary v
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
vi Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
List of figures
5-1 9326 d2U pyramidal view (without shielded faceplate) .............................................................................. 5-2
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary vii
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
viii Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
About this document
About this document
Purpose
The purpose of this document is to describe corrective maintenance procedures applicable
to the 9326 d2U rack.
Note: This document only describes maintenance procedures relating to 9326 d2U V1
product. For detailed information on 9326 d2U V2 maintenance, refer to the following
document: Alcatel-Lucent 9326 digital 2U Node B V2 - Maintenance Guide,
NN-20500-204.
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary ix
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
About this document
....................................................................................................................................................................................................................................
Intended audience
The audience for this document is Operations and maintenance personnel and those who
want to know the principles of 9326 d2U maintenance.
Supported systems
This document applies to Alcatel-Lucent W-CDMA UA08.1 system release.
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
Prerequisites
It is recommended that readers become familiar with the following documents:
Alcatel-Lucent 9326 digital 2U Node B - Technical Description, NN-20500-108
Alcatel-Lucent 9100 and 93xx Node B Commissioning and Fault Management User
Manual: TIL, NN-20500-019
Conventions used
Vocabulary conventions
For a list of terms used in this document, see Alcatel-Lucent W-CDMA System -
Terminology, NN-20500-002.
Typographical conventions
The following typographical conventions are used in this document:
Appearance Description
Italicized text Emphasized information
graphical user interface text Text that is displayed in a graphical user interface or
in a hardware label
Document reference, reference number Related document that is referenced in the document
....................................................................................................................................................................................................................................
x Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
About this document
....................................................................................................................................................................................................................................
Related information
For information on subjects related to the content of this document, refer to the
documents listed in the following table:
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
1-888-582-3688 (for the United States)
1-630-224-2485 (for all other countries)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary xi
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
About this document
....................................................................................................................................................................................................................................
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com)
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
xii Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
1 1oadmap to Distributed
R
Base Station
documentation
Overview
Purpose
This chapter provides the roadmap for Distributed Base Station documentation.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 1-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Roadmap to Distributed Base Station documentation Roadmap to Distributed Base Station documentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Roadmap to Distributed Base Station documentation Roadmap to Distributed Base Station documentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 1-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Roadmap to Distributed Base Station documentation Roadmap to Distributed Base Station documentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
2 Safety statements
2
Overview
Purpose
This chapter provides information on the structure of safety statements which may arise
in the course of your work.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 2-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Safety statements Structure of safety statements
....................................................................................................................................................................................................................................
General structure
Safety statements include the following structural elements:
B C D
CAUTION
MP L E
Lifting hazard E F
SA
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
G
Always use three people or a lifting device to transport
and position this equipment. [ABC123]
H
Item Structure element Purpose
1 Safety alert symbol Indicates the potential for personal injury
(optional)
2 Safety symbol Indicates hazard type (optional)
3 Signal word Indicates the severity of the hazard
4 Hazard type Describes the source of the risk of damage or
injury
5 Safety message Consequences if protective measures fail
6 Avoidance message Protective measures to take to avoid the hazard
7 Identifier The reference ID of the safety statement
(optional)
....................................................................................................................................................................................................................................
2-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Safety statements Structure of safety statements
....................................................................................................................................................................................................................................
Signal words
The signal words identify the hazard severity levels as follows:
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 2-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Safety statements Structure of safety statements
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
3 3 orrective maintenance
C
activity
Overview
Purpose
This chapter describes the corrective maintenance activity applicable to the 9326 d2U
rack.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 3-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Corrective maintenance activity Corrective maintenance activity
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Corrective maintenance activity Corrective maintenance activity
....................................................................................................................................................................................................................................
Intervention restrictions
There may be a lapse of time between the identification of the alarm at the Access OAM
Graphic User Interface (GUI) and the time you arrive at the site.
You must be synchronized with the access network controller or system administrator (by
telephone) before an on-site intervention, in the following cases:
Isolating procedures
Completion of an on-site intervention
Return to service procedure
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
4 9326 d2U introduction
4
Overview
Purpose
This chapter introduces the 9326 d2U.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 4-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U introduction 9326 d2U introduction
....................................................................................................................................................................................................................................
Benefits
The Alcatel-Lucent Remote Radio solution improves flexibility for deploying mobile
broadband Node Bs in space-constrained locations. It is particularly suited to
macro-cellular applications in dense areas, where site acquisition is difficult, and on sites
where installation constraints prevent the use of legacy Node Bs.
Compared to legacy Node B site deployment, the Remote Radio solution provides the
following benefits:
Reduced volume, weight, footprint, acoustic noise, and power consumption
Reduced cost of feeder paths from the Node B to the antenna
Increased RF power per carrier at the antenna feeder
Reduced radio loss with use of the remote RF block concept, which eliminates the
distance between the radio amplifier and the antenna
The Remote Radio solution provides for the UMTS system:
The means of communication between a User Equipment (UE) and a network using
Transport Channels
Physical layer channels, which are necessary to synchronize the downlink and
perform cell selection/reselection and handover preparation
Measurement information to the RNC for radio resource management (handover,
power control)
The 9326 d2U provides up to eight E1/T1 with Inversion Multiplexing ATM (IMA) or
Drop-and-Insert capability (fractional E1/T1). The 9326 d2U also supports multi-PCM
without IMA.
The 9326 d2U delivers high UMTS radio performances and supports the enhanced High
Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access
(HSUPA) solutions through easy software upgrade.
The 9326 d2U is compliant with the Common Public Radio Interface (CPRI).
....................................................................................................................................................................................................................................
4-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U introduction 9326 d2U introduction
....................................................................................................................................................................................................................................
9326 d2U enclosure
The 9326 d2U provides the operators with a suited solution whatever the site constraints.
The 9326 d2U can be installed in a standalone indoor mode or in the user space of an
existing indoor or outdoor Node B cabinet.
The 9326 d2U is factory-equipped with a specific shielded faceplate.
Important! During normal operation, the 9326 d2U must be fitted with its shielded
faceplate. For debug purposes, this shielded faceplate must be removed to allow
access to the iCEM-U connectors.
The following figure shows an outside view of the 9326 d2U.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 4-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U introduction 9326 d2U introduction
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
4-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
5 5326 d2U hardware
9
presentation
Overview
Purpose
This chapter describes the hardware of the 9326 d2U rack.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 5-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U hardware presentation 9326 d2U hardware presentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
5-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U hardware presentation 9326 d2U hardware presentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 5-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U hardware presentation 9326 d2U hardware presentation
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
5-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
6 6326 d2U power up and
9
power down procedures
Overview
Purpose
This chapter describes how to power up and power down the 9326 d2U.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 6-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U power up and power down procedures Powering up a 9326 d2U
....................................................................................................................................................................................................................................
Initial check
On the RUC module, check that the power switch is in the "O" position.
Procedure
...................................................................................................................................................................................................
1 At the operator DC power supply, put the site circuit breaker of the 9326 d2U in the "ON"
position.
...................................................................................................................................................................................................
2 On the RUC module, put the power switch in the "1" position.
...................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
6-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U power up and power down procedures Powering down the 9326 d2U
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
2 On the RUC module, put the power switch to the "O" position.
...................................................................................................................................................................................................
3 Check that all LEDs on the iCCM-U and on each iCEM-U are OFF.
...................................................................................................................................................................................................
5 At the operator DC power supply, put the site circuit breaker of the 9326 d2U in the
"OFF" position.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 6-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U power up and power down procedures Powering down the 9326 d2U
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
6-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
7 7326 d2U corrective
9
maintenance procedures
Overview
Purpose
This chapter contains the replacement procedures applicable to the 9326 d2U rack.
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Overview
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
Overview
Purpose
This section presents the replacement procedures applicable to the digital shelf.
Those replacement procedures concern the following modules:
integrated Channel Element Module-U (iCEM-U)
integrated Core Control Module-U (iCCM-U)
Optical transceiver
9326 d2U pre-cabled rack
Contents
....................................................................................................................................................................................................................................
7-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCEM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
Intervention time
Ten minutes
Tools required
Screwdriver
Extraction tool
NOTICE
ESD hazard
Electronic components can be destroyed by electrostatic discharge (ESD).
Hold circuit packs only at the edges or on the insertion and removal facilities.
Always observe the general ESD instructions.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCEM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
NOTICE
Service-disruption hazard
Following the procedure below will result in a loss of capacity or a loss of service
(depending on the number of iCEMs-U in the digital shelf).
Procedure
...................................................................................................................................................................................................
2 Locate the faulty iCEM-U in the digital shelf: its red triangular LED is ON.
...................................................................................................................................................................................................
3 Lock the faulty cem object at the OMC by Set Administrative State.
For more information, refer to Alcatel-Lucent 9353 Wireless Management System - User
Guide, NN-20500-032.
...................................................................................................................................................................................................
4 Untighten the eight screws from the shielded faceplate, as shown below.
...................................................................................................................................................................................................
5 Remove the 9326 d2U shielded faceplate, handling with care the associated gasket.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCEM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
9 Check the state of the LEDs. They should go on, then take the following state:
red triangular LED OFF and green rectangular LED ON.
...................................................................................................................................................................................................
10 Put in place the shielded faceplate, taking care not to damage the associated gasket.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-5
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCCM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
Intervention time
20 minutes
Tools required
Screwdriver
Extraction tool
DANGER
Laser hazard
This equipment operates with invisible laser radiation. Laser radiation can cause
considerable injuries to the eyes.
Never look into the end of an exposed fiber or into an open optical connector when the
optical source is switched on. Always observe the laser warning instructions.
....................................................................................................................................................................................................................................
7-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCCM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
NOTICE
ESD hazard
Electronic components can be destroyed by electrostatic discharge (ESD).
Hold circuit packs only at the edges or on the insertion and removal facilities.
Always observe the general ESD instructions.
NOTICE
Service-disruption hazard
Following the procedure below will result in a loss of service.
Important! There will be a loss of service on the Remote Radio device(s) associated
with the iCCM-U being replaced.
Procedure
...................................................................................................................................................................................................
2 Lock all the objects associated with the Remote Radio devices connected to the faulty
iCCM-U at the OMC by Set Administrative State.
For more information, refer to Alcatel-Lucent 9353 Wireless Management System - User
Guide, NN-20500-032.
...................................................................................................................................................................................................
4 Untighten the eight screws from the shielded faceplate, as shown below.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-7
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCCM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5 Remove the 9326 d2U shielded faceplate, handling with care the associated gasket.
...................................................................................................................................................................................................
6 Unplug the iCCM-U from its RBP connectors using the extraction tool.
...................................................................................................................................................................................................
9 Disconnect the digital cable (connector labeled "ALARM" on the shielded faceplate)
from the iCCM-U front panel.
...................................................................................................................................................................................................
10 Disconnect the E1/T1 connector (PCM link) from the iCCM-U front panel.
...................................................................................................................................................................................................
12 Insert the new iCCM-U into the slot guides without plugging it on the RBP.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-8 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCCM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
16 Insert completely the new iCCM-U into the digital shelf by plugging it into its RBP
connectors.
...................................................................................................................................................................................................
17 Put in place the shielded faceplate, taking care not to damage the associated gasket.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-9
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the iCCM-U
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
21 Reconnect the E1/T1 connector (PCM link) on the iCCM-U front panel.
...................................................................................................................................................................................................
22 Unlock from the OMC the objects previously locked through step 2.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-10 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing an optical transceiver
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
Intervention time
Five minutes
Tools required
None
DANGER
Laser hazard
This equipment operates with invisible laser radiation. Laser radiation can cause
considerable injuries to the eyes.
Never look into the end of an exposed fiber or into an open optical connector when the
optical source is switched on. Always observe the laser warning instructions.
NOTICE
ESD hazard
Electronic components can be destroyed by electrostatic discharge (ESD).
Hold circuit packs only at the edges or on the insertion and removal facilities.
Always observe the general ESD instructions.
Procedure
...................................................................................................................................................................................................
2 Locate the faulty SFP transceiver: its two green RX/TX OPTIC LEDs (close to the eight
PCM LEDs) are OFF.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-11
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing an optical transceiver
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 At the OMC, through Set Administrative State, lock the FDDCell object associated with
the Remote Radio device connected to the optical transceiver being replaced.
...................................................................................................................................................................................................
4 Disconnect the optical fiber connected to the defective SFP transceiver (optical output
labeled "OPTIC1", "OPTIC2" or "OPTIC3").
...................................................................................................................................................................................................
6 Check that the new replacing SFP transceiver has the same type as the SFP transceiver
being replaced.
Be sure to replace a SM SFP transceiver with a SM SFP transceiver and a MM SFP
transceiver with a MM SFP transceiver.
...................................................................................................................................................................................................
7 Put in place the new SFP transceiver and insert it in the iCCM-U.
....................................................................................................................................................................................................................................
7-12 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing an optical transceiver
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
9 Unlock from the OMC the FDDCell object previously locked through step 3.
...................................................................................................................................................................................................
10 Check the state of the two green RX/TX OPTIC LEDs: they should be ON.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-13
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
Intervention time
30 minutes
Tools required
Screwdrivers
Extraction tool
DANGER
Laser hazard
This equipment operates with invisible laser radiation. Laser radiation can cause
considerable injuries to the eyes.
Never look into the end of an exposed fiber or into an open optical connector when the
optical source is switched on. Always observe the laser warning instructions.
....................................................................................................................................................................................................................................
7-14 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
NOTICE
ESD hazard
Electronic components can be destroyed by electrostatic discharge (ESD).
Hold circuit packs only at the edges or on the insertion and removal facilities.
Always observe the general ESD instructions.
NOTICE
Service-disruption hazard
Following the procedure below will result in a loss of service.
Procedure
...................................................................................................................................................................................................
2 Lock the cem and ccm objects as well as all the objects associated with the Remote Radio
devices connected to the iCCM-U at the OMC, by Set Administrative State.
For more information, refer to Alcatel-Lucent 9353 Wireless Management System - User
Guide, NN-20500-032.
...................................................................................................................................................................................................
4 Remove the management sticker located on the right hand side of the RUC module front
panel.
This removable sticker contains a 6-digit Network IDentifier (NeID) that is used at 9326
d2U connection to the OMC. This sticker must be stored in a safe location since it will be
reused on the new 9326 d2U rack.
...................................................................................................................................................................................................
5 Untighten the eight screws from the shielded faceplate, as shown below.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-15
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
6 Remove the 9326 d2U shielded faceplate, handling with care the associated gasket.
...................................................................................................................................................................................................
11 Fix the NeID sticker on the right hand side of the RUC module, on the new 9326 d2U
rack.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-16 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
14 Put in place the shielded faceplate (with the gasket) on the new 9326 d2U rack.
...................................................................................................................................................................................................
18 Reconnect the E1/T1 connector (PCM link) on the iCCM-U front panel.
...................................................................................................................................................................................................
19 Unlock from the OMC the objects previously locked through step 2.
...................................................................................................................................................................................................
20 Connect the TIL on "PORT2" of the 9326 d2U to modify the pre-cabled rack inventory
parameters.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-17
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
23
...................................................................................................................................................................................................
25 The Serialisation number, Manufacturing Date, and Hardware Release fields are
linked with the defective 9326 d2U rack. This information must be updated.
....................................................................................................................................................................................................................................
7-18 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
26 Using the information written on the pre-cabled rack sticker present on the front face of
the 9326 d2U spare, fill out the Serialisation number, Manufacturing Date, and
Hardware Release fields.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-19
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
27 Click Send to iBTS and wait during the operation. At the end of the operation, the
following message is displayed:
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-20 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-21
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the pre-cabled 9326 d2U rack
Replacing the digital shelf equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-22 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Overview
Replacing the optional equipment
....................................................................................................................................................................................................................................
Overview
Purpose
This section presents the replacement procedures related to the following items:
External Alarm module
PCM Lightning Protection (LPPCM) module
Contents
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-23
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the External Alarm module
Replacing the optional equipment
....................................................................................................................................................................................................................................
Intervention time
10 minutes
Tools required
A Screwdriver
A wrench for hexagonal head (M6 nut)
NOTICE
ESD hazard
Wear the antistatic bracelet when performing the maintenance procedure described
below:
Electronic components can be destroyed by electrostatic discharge (ESD).
Hold circuit packs only at the edges or on the insertion and removal facilities.
Always observe the general ESD instructions.
Procedure
...................................................................................................................................................................................................
2 Locate the External Alarm module, just below the 9326 d2U shelf.
....................................................................................................................................................................................................................................
7-24 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the External Alarm module
Replacing the optional equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
3 On the External Alarm module, unplug the following cables from the front panel
connectors:
The two external alarm cables on ALARM 1 and ALARM 2 connectors
The alarm cable that connects the alarm module to the lightning protection module (if
exists)
The private alarm bus cable that is plugged to the front panel of the RUC module
The ground cable with the wrench for hexagonal head
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-25
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the LPPCM module
Replacing the optional equipment
....................................................................................................................................................................................................................................
Intervention time
15 minutes
Tools required
A screwdriver
A wrench for hexagonal head (M6 nut)
NOTICE
ESD hazard
Wear the antistatic bracelet when performing the maintenance procedure described
below.
Electronic components can be destroyed by electrostatic discharge (ESD).
Hold circuit packs only at the edges or on the insertion and removal facilities.
Always observe the general ESD instructions.
....................................................................................................................................................................................................................................
7-26 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the LPPCM module
Replacing the optional equipment
....................................................................................................................................................................................................................................
NOTICE
Service-disruption hazard
Following the procedure below will result in a loss of service.
Procedure
...................................................................................................................................................................................................
3 Locate the LPPCM module, just above the 9326 d2U shelf.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary 7-27
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
9326 d2U corrective maintenance procedures Replacing the LPPCM module
Replacing the optional equipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
7-28 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Appendix A: Product
conformance statements
Overview
Purpose
This appendix provides the 9326 d2U product conformance statements
Contents
...................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary A-1
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Product conformance statements European regulatory requirement compliance
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
A-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Product conformance statements European regulatory requirement compliance
....................................................................................................................................................................................................................................
The RoHS directive restricts the use of lead, mercury, cadmium, hexavalent
chromium, poly-brominated biphenyls (PBB) and poly-brominated diphenyl ethers
(PBDE) in electrical and electronic products. This directive applies to all electrical
and electronic products placed on the European Union (EU) and European Economic
Area (EEA) markets after July 1, 2006, with certain exemptions, including an
exemption for lead solder in network infrastructure equipment.
Waste of Electrical and Electronic Equipment (WEEE), 2002/96/EC.
The WEEE directive mandates the necessary treatment of such equipment when it
enters end-of-life. It specifically identifies requirements for recycling, reuse, and
disposal.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary A-3
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Product conformance statements North American regulatory requirement compliance
....................................................................................................................................................................................................................................
CAUTION
RF hazard
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Node B safety
The 9326 d2U complies with UL60950-1 and CAN/CSA C22.2 No. 60950-1 Safety
Standards.
The CSA mark is applied on the 9326 d2U and demonstrates compliance with both US
and Canadian Standards.
Node B EMC
The 9326 d2U complies with 47CFR Part 15 class A for EMC emission limits.
This Class A digital apparatus complies with Canadian ICES-003.
....................................................................................................................................................................................................................................
A-4 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Product conformance statements North American regulatory requirement compliance
....................................................................................................................................................................................................................................
On the core controller printed circuit board is a label that contains a product identifier in
the following format:
US: U3EXDNANICCMU for iCCM-U module
If requested, the following information must be provided to the telephone company:
ACTA Registered Number: U3E
Facility Interface Code (FIC): 04DU9.BN, 04DU9.DN, 04DU9.1KN, and
04DU9.1SN
Service Order Code (SOC): 6.0P
A FCC part 68 and ACTA compliant cable is provided with the Node B equipment, with
no connector at network interface side. The Node B equipment operates with a 1.544
Mbps digital channel. See Installation Instructions for details.
If the Node B equipment causes harm to the phone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if
advance notice is not practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes to its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice so you can make the necessary modifications to
maintain uninterrupted services.
If trouble is experienced with this equipment 9326 d2U, for repair or warranty
information, please contact:
Hernan R. Noguchi Global
Product Compliance Laboratory (GPCL)
Alcatel-Lucent
Phone: 1-732-332-6002 101
Crawfords Corner Road Building
11C, Room 165 Holmdel NJ 07733-3030
If the equipment is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved.
All repairs should be handled by authorized Alcatel-Lucent Service Personnel.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary A-5
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Product conformance statements North American regulatory requirement compliance
....................................................................................................................................................................................................................................
Node B data equipment
The following table shows which jacks are associated with which modes of operation.
Node B systems
Facility Interface Codes (FIC), Services Order Codes (SOC), USOC Jack Codes, and
Ringer Equivalence Number (REN) are shown in the table below for each port where
applicable.
....................................................................................................................................................................................................................................
A-6 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Product conformance statements Compliances for other regions/countries
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary A-7
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Product conformance statements Operating conditions
....................................................................................................................................................................................................................................
Operating conditions
Overview
The product compliance standards mentioned above are based on the following operating
conditions:
External cables must be of the same type as specified by Alcatel-Lucent.
No modification of any mechanical or electrical characteristics of the product shall be
made.
Any changes or modifications made to the product without written approval from
Alcatel-Lucent releases Alcatel-Lucent from responsibility regarding standards
compliance.
....................................................................................................................................................................................................................................
A-8 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Product conformance statements Cable specifications
....................................................................................................................................................................................................................................
Cable specifications
Overview
Compliance with these standards was verified using cables as specified by
Alcatel-Lucent. The continuing compliance of the product relies upon use of the correct
cabling scheme as well as use of identical type cables as specified by Alcatel-Lucent.
Refer to the installation guides for details on cable specifications.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary A-9
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Product conformance statements Product labelling
....................................................................................................................................................................................................................................
Product labelling
Overview
The product label can be located on the inside or the outside of the product, provided that
the operation and/or maintenance personnel have the information when working on the
product.
On the main regulatory label, compliance to 47 CFR Part 15 is stated along with:
Manufacturers name
Equipment designation
Nominal voltage operating range and maximum rated current
Compliance to Industry Canada ICES-003 is stated on additional regulatory label.
Compliance to the 47 CFR Part68 and IC CS-03 are stated through additional labels on
the Core Controller Module printed circuit board since certification is performed at
module level (Host Independent submission).
....................................................................................................................................................................................................................................
A-10 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Product conformance statements Product labelling
....................................................................................................................................................................................................................................
Manufacturer name
Equipment designation
Nominal voltage operating range and maximum rated current
....................................................................................................................................................................................................................................
Alcatel-Lucent 9326 d2U Alcatel-Lucent Proprietary A-11
NN-20500-110 UA08.1 Use pursuant to applicable agreements
Issue 08.06 January 2013
Product conformance statements Product labelling
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
A-12 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013
Index
Numerics ................................................................................................
9326 d2U
L LPPCM
benefit, 4-2 See: PCM Lightning Protection (LPPCM)
description, 5-2 ................................................................................................
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
IN-2 Alcatel-Lucent Proprietary Alcatel-Lucent 9326 d2U
Use pursuant to applicable agreements NN-20500-110 UA08.1
Issue 08.06 January 2013