2CDs 1-2 corks Vanilla Folders Tape Glue gun Optional Popsicle sticks 6-12Volt Motor 4:Alligator clips 20 milliamps LED Clear with red light Or Circuit Scribe lights
Step 1, cut the cork in half.
Step 2, Hot Glue the CD center to the level uncut side of the Cork. Wait Step 3, Fold the vanilla folder into fourths like a hotdog. Cut each rectangular section out. Step4, Place the vanilla folders individually in four sections on the cd, Have them curve inward like a cup and tape them down one by one. Step5, Tap the he vanilla folders with a curve to the top cd. Step6, Glue the Cork on the top using the hot glue gun. Step7, Critical step find the center of the cork and press the motor axle into the center of the cork. Step8, Attach one end of the alligator clips to the positive and respectively the negative terminals of the alligator clips to the motor power and ground. Step9, Clip the other end of the a LED, if it is a bi-led your done, rotate the blades and see the light flicker. Step10, If using regular Led rotate until you see light flashing, if it is not working reverse the alligator clips to the other direction on the motor. (note LEDs are not reversible they have a directionality.) Cork