Академический Документы
Профессиональный Документы
Культура Документы
Version: V3.20.30
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
First edition.
II
III
IV
VI
VII
VIII
IX
XI
XII
Figures............................................................................................................. I
XIII
Intended Audience
l eNodeB deployment engineers
l Maintenance engineers
l Network management engineers
Chapter Summary
Chapter 1, Statistics of RRC Connection Describes the performance counters of RRC connection
Chapter 6, Statistics of Super Cell Describes the performance counters of Super Cell
Chapter 9, Statistics of Energy Saving Describes the performance counters of Energy Saving
Chapter 12Statistics of Cell Congestion Describes the performance counters of cell congestion
Chapter 13, Statistics of Service Time Describes the performance counters of service time
Chapter 16, Statistics of Traffic QoS Describes the performance counters of traffic QoS
Chapter 17, Statistics of Radio Resources Describes the performance counters of radio resources
Chapter 20, Statistics of System Describes the performance counters of system resources
Resources
II
1-1
1-2
Counter Name
Number of Successful Mt-Access RRC Establishment
Short Name
RRC.ConnEstabSucc.CauseMtAccess
Counter Description
The RRCConnectionSetupComplete message is used to confirm the successful
completion of an RRC connection establishment. The counter is used to count the
number of RRCConnectionSetupComplete message received by eNodeB from UE, and
the RRC establishment cause is mt-Access.
Triggering Point
When the eNodeB receives the RRCConnectionSetupComplete message from the UE and
the establishmentCause is mt-access.
1-3
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionSetupComplete message from the UE and the establishmentCause
is mt-access.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.2 C373200001
Counter Name
Number of Mt-Access RRC Establishment Failure due to Timeout
Short Name
RRC.ConnEstabFail.CauseMtAccess.Timeout
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE ,then sends
the RRCConnectionSetup message to the UE. While the eNodeB is waiting for the
RRCConnectionSetupComplete message from the UE, the timer expires and then the
eNodeB sends the RRCConnectionRelease message to the UE. The counter is used to
count the number of RRC establishment failures for timeout.
Triggering Point
When the timer of waiting for the RRCConnectionSetupComplete message expires and
the establishmentCause is mt-access.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the timer of waiting for the
RRCConnectionSetupComplete message expires and the establishmentCause is
mt-access.
1-4
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.3 C373200002
Counter Name
Number of Mt-Access RRC Establishment Failure due to ENB Admission Failure
Short Name
RRC.ConnEstabFail.CauseMtAccess.AdmissionFail
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is mt-Access. The eNodeB occurs admission failures during RRC
Connection setup procedure, then sends RRCConnectionReject message to the UE. The
counter is used to count the number of RRC establishment failures for admission failures.
Triggering Point
When the eNodeB occurs admission failures during RRC Connection setup procedure and
the establishmentCause is mt-access.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs admission failures during RRC
Connection setup procedure and the establishmentCause is mt-access.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-5
1.1.3.4 C373200003
Counter Name
Number of Mt-Access RRC Establishment Failure due to Other Reason
Short Name
RRC.ConnEstabFail.CauseMtAccess.Unspecified
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is mt-Access. The eNodeB occurs failures for other reason during
RRC Connection setup procedure, then sends RRCConnectionReject message to the UE.
The counter is used to count the number of RRC establishment failures for other reason.
Triggering Point
When the eNodeB occurs other failures during RRC Connection setup procedure and the
establishmentCause is mt-access.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs other failures during RRC
Connection setup procedure and the establishmentCause is mt-access.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.5 C373200004
Counter Name
Number of Successful Mo-Signalling RRC Establishment
Short Name
RRC.ConnEstabSucc.CauseMoSignalling
1-6
Counter Description
The RRCConnectionSetupComplete message is used to confirm the successful
completion of an RRC connection establishment.The counter is used to count the number
of RRCConnectionSetupComplete message received by eNodeB from UE, and the RRC
establishment cause is mo-Signalling.
Triggering Point
When the eNodeB receives the RRCConnectionSetupComplete message from the UE and
the establishmentCause is mo-signalling.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionSetupComplete message from the UE and the establishmentCause
is mo-signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.6 C373200005
Counter Name
Number of Mo-Signalling RRC Establishment Failure due to Timeout
Short Name
RRC.ConnEstabFail.CauseMoSignalling.Timeout
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE , then sends
the RRCConnectionSetup message to the UE. While the eNodeB is waiting for the
RRCConnectionSetupComplete from the UE, the timer expires and then the eNodeB
sends the RRCConnectionRelease message to the UE. The counter is used to count the
number of RRC establishment failures for timeout.
1-7
Triggering Point
When the timer of waiting for the RRCConnectionSetupComplete message expires and
the establishmentCause is mo-signalling.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the timer of waiting for the
RRCConnectionSetupComplete message expires and the establishmentCause is
mo-signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.7 C373200006
Counter Name
Number of Mo-Signalling RRC Establishment Failure due to ENB Admission Failure
Short Name
RRC.ConnEstabFail.CauseMoSignalling.AdmissionFail
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is mo-Signalling. The eNodeB occurs admission failures during RRC
Connection setup procedure, then sends RRCConnectionReject message to the UE. The
counter is used to count the number of RRC establishment failures for admission failures.
Triggering Point
When the eNodeB occurs admission failures during RRC Connection setup procedure and
the establishmentCause is mo-signalling.
Refer to Sampling Point 4.
1-8
Update Description
The counter is incremented by 1 when the eNodeB occurs admission failures during RRC
Connection setup procedure and the establishmentCause is mo-signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.8 C373200007
Counter Name
Number of Mo-Signalling RRC Establishment Failure due to Other Reason
Short Name
RRC.ConnEstabFail.CauseMoSignalling.Unspecified
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is mo-Signalling. The eNodeB occurs failures for other reason during
RRC Connection setup procedure, then sends RRCConnectionReject message to the UE.
The counter is used to count the number of RRC establishment failures for other reason.
Triggering Point
When the eNodeB occurs other failures during RRC Connection setup procedure and the
establishmentCause is mo-signalling.
Update Description
The counter is incremented by 1 when the eNodeB occurs failures for other reason during
RRC Connection setup procedure and the establishmentCause is mo-signalling.
Counter Type
Accumulated value
1-9
Sampling Period
Event triggered
Unit
times
1.1.3.9 C373200008
Counter Name
Number of Successful Mo-Data RRC Establishment
Short Name
RRC.ConnEstabSucc.CauseMoData
Counter Description
The RRCConnectionSetupComplete message is used to confirm the successful
completion of an RRC connection establishment.The counter is used to count the number
of RRCConnectionSetupComplete message received by eNodeB from UE, and the RRC
establishment cause is mo-Data.
Triggering Point
When the eNodeB receives the RRCConnectionSetupComplete message from the UE and
the establishmentCause is mo-Data.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionSetupComplete message from the UE and the establishmentCause
is mo-Data.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-10
1.1.3.10 C373200009
Counter Name
Number of Mo-Data RRC Establishment Failure due to Timeout
Short Name
RRC.ConnEstabFail.CauseMoData.Timeout
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE , then sends
the RRCConnectionSetup message to the UE. While the eNodeB is waiting for the
RRCConnectionSetupComplete from the UE, the timer expires and then the eNodeB
sends the RRCConnectionRelease message to the UE. The counter is used to count the
number of RRC establishment failures for timeout.
Triggering Point
When the timer of waiting for the RRCConnectionSetupComplete message expires and
the establishmentCause is mo-Data.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the timer of waiting for the
RRCConnectionSetupComplete message expires and the establishmentCause is
mo-Data.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.11 C373200010
Counter Name
Number of Mo-Data RRC Establishment Failure due to ENB Admission Failure
1-11
Short Name
RRC.ConnEstabFail.CauseMoData.AdmissionFail
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is mo-Data. The eNodeB occurs admission failures during RRC
Connection setup procedure, then sends RRCConnectionReject message to the UE. The
counter is used to count the number of RRC establishment failures for admission failures.
Triggering Point
When the eNodeB occurs admission failures during RRC Connection setup procedure and
the establishmentCause is mo-Data.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs admission failures during RRC
Connection setup procedure and the establishmentCause is mo-Data.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.12 C373200011
Counter Name
Number of Mo-Data RRC Establishment Failure due to Other Reason
Short Name
RRC.ConnEstabFail.CauseMoData.Unspecified
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is mo-Data. The eNodeB occurs failures for other reason during RRC
Connection setup procedure, then sends RRCConnectionReject message to the UE. The
counter is used to count the number of RRC establishment failures for other reason.
1-12
Triggering Point
When the eNodeB occurs other failures during RRC Connection setup procedure and the
establishmentCause is mo-Data.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs other failures during RRC
Connection setup procedure and the establishmentCause is mo-Data.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.13 C373200012
Counter Name
Number of Successful HighPriorityAccess RRC Establishment
Short Name
RRC.ConnEstabSucc.CauseHighPriorityAccess
Counter Description
The RRCConnectionSetupComplete message is used to confirm the successful
completion of an RRC connection establishment.The counter is used to count the number
of RRCConnectionSetupComplete message received by eNodeB from UE, and the RRC
establishment cause is highPriorityAccess.
Triggering Point
When the eNodeB receives the RRCConnectionSetupComplete message from the UE and
the establishmentCause is highPriorityAccess.
Refer to Sampling Point 3.
1-13
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionSetupComplete message from the UE and the establishmentCause
is highPriorityAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.14 C373200013
Counter Name
Number of HighPriorityAccess RRC Establishment Failure due to Timeout
Short Name
RRC.ConnEstabFail.CauseHighPriorityAccess.Timeout
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE ,then sends
the RRCConnectionSetup message to the UE. While the eNodeB is waiting for the
RRCConnectionSetupComplete from the UE, the timer expires and then the eNodeB
sends the RRCConnectionRelease message to the UE. The counter is used to count the
number of RRC establishment failures for timeout.
Triggering Point
When the timer of waiting for the RRCConnectionSetupComplete message expires and
the establishmentCause is highPriorityAccess.
Update Description
The counter is incremented by 1 when the timer of waiting for the
RRCConnectionSetupComplete message expires and the establishmentCause is
highPriorityAccess.
1-14
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.15 C373200014
Counter Name
Number of HighPriorityAccess RRC Establishment Failure due to ENB Admission Failure
Short Name
RRC.ConnEstabFail.CauseHighPriorityAccess.AdmissionFail
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is highPriorityAccess. The eNodeB occurs admission failures during
RRC Connection setup procedure, then sends RRCConnectionReject message to the UE.
The counter is used to count the number of RRC establishment failures for admission
failures.
Triggering Point
When the eNodeB occurs admission failures during RRC Connection setup procedure and
the establishmentCause is highPriorityAccess.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs admission failures during RRC
Connection setup procedure and the establishmentCause is highPriorityAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
1-15
Unit
times
1.1.3.16 C373200015
Counter Name
Number of HighPriorityAccess RRC Establishment Failure due to Other Reason
Short Name
RRC.ConnEstabFail.CauseHighPriorityAccess.Unspecified
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is highPriorityAccess. The eNodeB occurs failures for other reason
during RRC Connection setup procedure, then sends RRCConnectionReject message to
the UE. The counter is used to count the number of RRC establishment failures for other
reason.
Triggering Point
When the eNodeB occurs other failures during RRC Connection setup procedure and the
establishmentCause is highPriorityAccess.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs other failures during RRC
Connection setup procedure and the establishmentCause is highPriorityAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.17 C373200016
Counter Name
Number of Successful Emergency RRC Establishment
1-16
Short Name
RRC.ConnEstabSucc.CauseEmergency
Counter Description
The RRCConnectionSetupComplete message is used to confirm the successful
completion of an RRC connection establishment.The counter is used to count the number
of RRCConnectionSetupComplete message received by eNodeB from UE, and the RRC
establishment cause is emergency.
Triggering Point
When the eNodeB receives the RRCConnectionSetupComplete message from the UE and
the establishmentCause is emergency.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionSetupComplete message from the UE and the establishmentCause is
emergency.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.18 C373200017
Counter Name
Number of Emergency RRC Establishment Failure due to Timeout
Short Name
RRC.ConnEstabFail.CauseEmergency.Timeout
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE , then sends
the RRCConnectionSetup message to the UE. While the eNodeB is waiting for the
RRCConnectionSetupComplete from the UE, the timer expires and then the eNodeB
1-17
sends the RRCConnectionRelease message to the UE. The counter is used to count the
number of RRC establishment failures for timeout.
Triggering Point
When the timer of waiting for the RRCConnectionSetupComplete message expires and
the establishmentCause is emergency.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the timer of waiting for the
RRCConnectionSetupComplete message expires and the establishmentCause is
emergency.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.19 C373200018
Counter Name
Number of Emergency RRC Establishment Failure due to ENB Admission Failure
Short Name
RRC.ConnEstabFail.CauseEmergency.AdmissionFail
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is emergency. The eNodeB occurs admission failures during RRC
Connection setup procedure, then sends RRCConnectionReject message to the UE. The
counter is used to count the number of RRC establishment failures for admission failures.
Triggering Point
When the eNodeB occurs admission failures during RRC Connection setup procedure and
the establishmentCause is emergency.
Refer to Sampling Point 4.
1-18
Update Description
The counter is incremented by 1 when the eNodeB occurs admission failures during RRC
Connection setup procedure and the establishmentCause is emergency.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.20 C373200019
Counter Name
Number of Emergency RRC Establishment Failure due to Other Reason
Short Name
RRC.ConnEstabFail.CauseEmergency.Unspecified
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is emergency. The eNodeB occurs failures for other reason during
RRC Connection setup procedure, then sends RRCConnectionReject message to the UE.
The counter is used to count the number of RRC establishment failures for other reason.
Triggering Point
When the eNodeB occurs other failures during RRC Connection setup procedure and the
establishmentCause is emergency.
Update Description
The counter is incremented by 1 when the eNodeB occurs other failures during RRC
Connection setup procedure and the establishmentCause is emergency.
Counter Type
Accumulated value
1-19
Sampling Period
Event triggered
Unit
times
1.1.3.21 C373200084
Counter Name
Number of Mt-Access RRC Establishment Request
Short Name
RRC.ConnEstabAtt.CauseMtAccess
Counter Description
The eNodeB receives a RRCConnectionRequest message from the UE and the RRC
Connection setup cause is mt-access. Each RRCConnectionRequest message received
is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionRequest message from UE and the RRC
Connection setup cause is mt-access.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the RRCConnectionRequest
message from UE and the RRC Connection setup cause is mt-access.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-20
1.1.3.22 C373200085
Counter Name
Number of Mo-Signalling RRC Establishment Request
Short Name
RRC.ConnEstabAtt.CauseMoSignalling
Counter Description
The eNodeB receives a RRCConnectionRequest message from the UE and the RRC
Connection setup cause is mo-Signalling. Each RRCConnectionRequest message
received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionRequest message from UE and the RRC
Connection setup cause is mo-Signalling.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the RRCConnectionRequest
message from UE and the RRC Connection setup cause is mo-Signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.23 C373200086
Counter Name
Number of Mo-Data RRC Establishment Request
Short Name
RRC.ConnEstabAtt.CauseMoData
1-21
Counter Description
The eNodeB receives a RRCConnectionRequest message from the UE and the RRC
Connection setup cause is mo-Data. Each RRCConnectionRequest message received
is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionRequest message from UE and the RRC
Connection setup cause is mo-Data.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the RRCConnectionRequest
message from UE and the RRC Connection setup cause is mo-Data.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.24 C373200087
Counter Name
Number of HighPriorityAccess RRC Establishment Request
Short Name
RRC.ConnEstabAtt.CauseHighPriorityAccess
Counter Description
The eNodeB receives a RRCConnectionRequest message from the UE and the RRC
Connection setup cause is highPriorityAccess. Each RRCConnectionRequest message
received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionRequest message from UE and the RRC
Connection setup cause is highPriorityAccess.
Refer to Sampling Point 1.
1-22
Update Description
The counter is incremented by 1 when the eNodeB receives the RRCConnectionRequest
message from UE and the RRC Connection setup cause is highPriorityAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.25 C373200088
Counter Name
Number of Emergency RRC Establishment Request
Short Name
RRC.ConnEstabAtt.CauseEmergency
Counter Description
The eNodeB receives a RRCConnectionRequest message from the UE and the RRC
Connection setup cause is emergency. Each RRCConnectionRequest message received
is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionRequest message from UE and the RRC
Connection setup cause is emergency.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the RRCConnectionRequest
message from UE and the RRC Connection setup cause is emergency.
Counter Type
Accumulated value
Sampling Period
Event triggered
1-23
Unit
times
1.1.3.26 C373200120
Counter Name
Number of Successful delayTolerantAccess RRC Establishment
Short Name
RRC.ConnEstabSucc.CauseDelayTolerantAccess
Counter Description
The RRCConnectionSetupComplete message is used to confirm the successful
completion of an RRC connection establishment.The counter is used to count the number
of RRCConnectionSetupComplete message received by eNodeB from UE, and the RRC
establishment cause is delayTolerantAccess.
Triggering Point
When the eNodeB receives the RRCConnectionSetupComplete message from the UE and
the establishmentCause is delayTolerantAccess.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionSetupComplete message from the UE and the establishmentCause
is delayTolerantAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.27 C373200121
Counter Name
Number of delayTolerantAccess RRC Establishment Failure due to Timeout
1-24
Short Name
RRC.ConnEstabFail.CauseDelayTolerantAccess.Timeout
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE ,then sends
the RRCConnectionSetup message to the UE. While the eNodeB is waiting for the
RRCConnectionSetupComplete message from the UE, the timer expires and then the
eNodeB sends the RRCConnectionRelease message to the UE. The counter is used to
count the number of RRC establishment failures for timeout.
Triggering Point
When the timer of waiting for the RRCConnectionSetupComplete message expires and
the establishmentCause is delayTolerantAccess.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the timer of waiting for the
RRCConnectionSetupComplete message expires and the establishmentCause is
delayTolerantAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.28 C373200122
Counter Name
Number of delayTolerantAccess RRC Establishment Failure due to ENB Admission Failure
Short Name
RRC.ConnEstabFail.CauseDelayTolerantAccess.AdmissionFail
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is delayTolerantAccess. The eNodeB occurs admission failures
1-25
Triggering Point
When the eNodeB occurs admission failures during RRC Connection setup procedure and
the establishmentCause is delayTolerantAccess.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB occurs admission failures during RRC
Connection setup procedure and the establishmentCause is delayTolerantAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.29 C373200123
Counter Name
Number of delayTolerantAccess RRC Establishment Failure due to Other Reason
Short Name
RRC.ConnEstabFail.CauseDelayTolerantAccess.Unspecified
Counter Description
The eNodeB receives the RRCConnectionRequest message from the UE, and the RRC
establishment cause is delayTolerantAccess. The eNodeB occurs failures for other reason
during RRC Connection setup procedure, then sends RRCConnectionReject message to
the UE. The counter is used to count the number of RRC establishment failures for other
reason.
Triggering Point
When the eNodeB occurs other failures during RRC Connection setup procedure and the
establishmentCause is delayTolerantAccess.
1-26
Update Description
The counter is incremented by 1 when the eNodeB occurs other failures during RRC
Connection setup procedure and the establishmentCause is delayTolerantAccess.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.1.3.30 C373200124
Counter Name
Number of delayTolerantAccess RRC Establishment Request
Short Name
RRC.ConnEstabAtt.CauseDelayTolerantAccess
Counter Description
The eNodeB receives a RRCConnectionRequest message from the UE and the RRC
Connection setup cause is delayTolerantAccess. Each RRCConnectionRequest message
received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionRequest message from UE and the RRC
Connection setup cause is delayTolerantAccess.
Update Description
The counter is incremented by 1 when the eNodeB receives the RRCConnectionRequest
message from UE and the RRC Connection setup cause is delayTolerantAccess.
Counter Type
Accumulated value
1-27
Sampling Period
Event triggered
Unit
times
1-28
1-29
1-30
Counter Name
Number of Successful RRC Connection Re-establishment Triggered by Handover Failure
Short Name
RRC.ConnReEstabSucc.Handover
Counter Description
Receipt by the eNodeB of a RRCConnectionReestablishmentComplete message
following a RRCConnectionReestablishmentRequest in which ReestablishmentCause is
handoverfailures. Each RRCConnectionReestablishmentComplete message received is
added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentComplete message from
the UE,and the ReestablishmentCause is handoverfailures.
Refer to Sampling Point 3.
1-31
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentComplete message from the UE and the
ReestablishmentCause is handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.2 C373200061
Counter Name
Number of Handover Failure Triggered RRC Re-establishment Failures due to RRC
Reestablish Complete Timeout
Short Name
RRC.ConnReEstabFail.Handover.timeout
Counter Description
The timer expires for an expected RRCConnectionReestablishmentComplete message
not received by the eNodeB and the ReestablishmentCause is handoverfailures. Each
failed RRC connection re-establishment is added to the counter.
Triggering Point
When the timer of waiting for the RRCConnectionReestablishmentComplete message
expires,and the ReestablishmentCause is handoverfailures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's waiting for the
RRCConnectionReestablishmentComplete timer expires,and the ReestablishmentCause
is handoverfailures.
Counter Type
Accumulated value
1-32
Sampling Period
Event triggered
Unit
times
1.2.3.3 C373200062
Counter Name
Number of Handover Failure Triggered RRC Re-establishment Failures due to ENB
Admission Failure
Short Name
RRC.ConnReEstabFail.Handover.AdmissionFail
Counter Description
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is handoverfailures.Each failed RRC
connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE
due to admission failures ,and the ReestablishmentCause is handoverfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to admission failures
,and the ReestablishmentCause is handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-33
1.2.3.4 C373200063
Counter Name
Number of Handover Failure Triggered RRC Re-establishment Failures due to UE Context
Not Found
Short Name
RRC.ConnReEstabFail.Handover.UeCtxtNotFound
Counter Description
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is handoverfailures.Each failed RRC
connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE
due to unknown UE identification,and the ReestablishmentCause is handoverfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to no finding the UE
context,and the ReestablishmentCause is handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.5 C373200064
Counter Name
Number of Handover Failure Triggered RRC Re-establishment Failures due to Continue
Re-establishment
1-34
Short Name
RRC.ConnReEstabFail.Handover.ContinueReestab
Counter Description
For again reestablishment, the eNodeB sends an RRCConnectionRelease message to
the UE and the ReestablishmentCause is handoverfailures.Each failed RRC connection
re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due
to again receiving the RRCConnectionReestablishmentRequest message,and the
ReestablishmentCause is handoverfailures.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE due to again receiving the RRCConnectionReestablishmentRequest
message,and the ReestablishmentCause is handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.6 C373200065
Counter Name
Number of Handover Failure Triggered RRC Re-establishment Failures due to Other
Reason
Short Name
RRC.ConnReEstabFail.Handover.OtherReason
1-35
Counter Description
For other reason, the eNodeB sends an RRCConnectionRelease message to the
UE and the ReestablishmentCause is handoverfailures.Each failed RRC connection
re-establishment is added to the counter.
Triggering Point
When the eNodeB occurs the RRC Connection Re-establishment failures due to other
reason,and the ReestablishmentCause is handoverfailures.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the RRC Connection
Re-establishment failures due to other reason,and the ReestablishmentCause is
handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.7 C373200066
Counter Name
Number of Successful RRC Connection Re-establishment Triggered by Reconfig Failure
Short Name
RRC.ConnReEstabSucc.Reconfig
Counter Description
Receipt by the eNodeB of a RRCConnectionReestablishmentComplete message
following a RRCConnectionReestablishmentRequest in which ReestablishmentCause
is reconfigurationfailures. Each RRCConnectionReestablishmentComplete message
received is added to the counter.
1-36
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentComplete message from
the UE,and the ReestablishmentCause is reconfigurationfailures.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentComplete message from the UE, and the
ReestablishmentCause is reconfigurationfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.8 C373200067
Counter Name
Number of Reconfig Failure Triggered RRC Re-establishment Failures due to RRC
Reestablish CompleteTimeout
Short Name
RRC.ConnReEstabFail.Reconfig.timeout
Counter Description
The timer expires for an expected RRCConnectionReestablishmentComplete message
not received by the eNodeB and the ReestablishmentCause is reconfigurationfailures.
Each failed RRC connection re-establishment is added to the counter.
Triggering Point
When the timer of waiting for the RRCConnectionReestablishmentComplete message
expires,and the ReestablishmentCause is reconfigurationfailures.
Refer to Sampling Point 5.
1-37
Update Description
The counter is incremented by 1 when the eNodeB's waiting for the
RRCConnectionReestablishmentComplete timer expires,and the ReestablishmentCause
is reconfigurationfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.9 C373200068
Counter Name
Number of Reconfig Failure Triggered RRC Re-establishment Failures due to ENB
Admission Failure
Short Name
RRC.ConnReEstabFail.Reconfig.AdmissionFail
Counter Description
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is reconfigurationfailures.Each failed
RRC connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE
due to admission failures ,and the ReestablishmentCause is reconfigurationfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to admission failures
,and the ReestablishmentCause is reconfigurationfailures.
Counter Type
Accumulated value
1-38
Sampling Period
Event triggered
Unit
times
1.2.3.10 C373200069
Counter Name
Number of Reconfig Failure Triggered RRC Re-establishment Failures due to UE Context
Not Found
Short Name
RRC.ConnReEstabFail.Reconfig.UeCtxtNotFound
Counter Description
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is reconfigurationfailures.Each failed
RRC connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message
to the UE due to unknown UE identification,and the ReestablishmentCause is
reconfigurationfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to no finding the UE
context,and the ReestablishmentCause is reconfigurationfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-39
1.2.3.11 C373200070
Counter Name
Number of Reconfig Failure Triggered RRC Re-establishment Failures due to Continue
Re-establishment
Short Name
RRC.ConnReEstabFail.Reconfig.ContinueReestab
Counter Description
For again reestablishment, the eNodeB sends an RRCConnectionRelease message to the
UE and the ReestablishmentCause is reconfigurationfailures.Each failed RRC connection
re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due
to again receiving the RRCConnectionReestablishmentRequest message,and the
ReestablishmentCause is reconfigurationfailures.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE due to again receiving the RRCConnectionReestablishmentRequest
message,and the ReestablishmentCause is reconfigurationfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.12 C373200071
Counter Name
Number of Reconfig Failure Triggered RRC Re-establishment Failures due to Other
Reason
1-40
Short Name
RRC.ConnReEstabFail.Reconfig.OtherReason
Counter Description
For other reason, the eNodeB sends an RRCConnectionRelease message to the UE
and the ReestablishmentCause is reconfigurationfailures.Each failed RRC connection
re-establishment is added to the counter.
Triggering Point
When the eNodeB occurs the RRC Connection Re-establishment failures due to other
reason,and the ReestablishmentCause is reconfigurationfailures.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the RRC Connection
Re-establishment failures due to other reason,and the ReestablishmentCause is
reconfigurationfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.13 C373200072
Counter Name
Number of Successful RRC Connection Re-establishment Triggered by Other
Short Name
RRC.ConnReEstabSucc.Other
Counter Description
Receipt by the eNodeB of a RRCConnectionReestablishmentComplete message
following a RRCConnectionReestablishmentRequest in which ReestablishmentCause
is otherfailures. Each RRCConnectionReestablishmentComplete message received is
added to the counter.
1-41
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentComplete message from
the UE,and the ReestablishmentCause is otherfailures.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentComplete message from the UE and the
ReestablishmentCause is otherfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.14 C373200073
Counter Name
Number of Other Triggered RRC Re-establishment Failures due to RRC Reestablish
CompleteTimeout
Short Name
RRC.ConnReEstabFail.Other.timeout
Counter Description
The timer expires for an expected RRCConnectionReestablishmentComplete message
not received by the eNodeB and the ReestablishmentCause is otherfailures. Each failed
RRC connection re-establishment is added to the counter.
Triggering Point
When the timer of waiting for the RRCConnectionReestablishmentComplete message
expires,and the ReestablishmentCause is otherfailures.
Refer to Sampling Point 5.
1-42
Update Description
The counter is incremented by 1 when the eNodeB's waiting for the
RRCConnectionReestablishmentComplete timer expires,and the ReestablishmentCause
is otherfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.15 C373200074
Counter Name
Number of Other Triggered RRC Re-establishment Failures due to ENB Admission Failure
Short Name
RRC.ConnReEstabFail.Other.AdmissionFail
Counter Description
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is otherfailures.Each failed RRC
connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE
due to admission failures ,and the ReestablishmentCause is otherfailures.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to admission failures
,and the ReestablishmentCause is otherfailures.
Counter Type
Accumulated value
1-43
Sampling Period
Event triggered
Unit
times
1.2.3.16 C373200075
Counter Name
Number of Other Triggered RRC Re-establishment Failures due to UE Context Not Found
Short Name
RRC.ConnReEstabFail.Other.UeCtxtNotFound
Counter Description
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is otherfailures.Each failed RRC
connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE
due to unknown UE identification,and the ReestablishmentCause is otherfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to no finding the UE
context,and the ReestablishmentCause is otherfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-44
1.2.3.17 C373200076
Counter Name
Number of Other Triggered RRC Re-establishment Failures due to Continue
Re-establishment
Short Name
RRC.ConnReEstabFail.Other.ContinueReestab
Counter Description
For again reestablishment, the eNodeB sends an RRCConnectionRelease message
to the UE and the ReestablishmentCause is otherfailures.Each failed RRC connection
re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due
to again receiving the RRCConnectionReestablishmentRequest message,and the
ReestablishmentCause is otherfailures.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE due to again receiving the RRCConnectionReestablishmentRequest
message,and the ReestablishmentCause is otherfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.18 C373200077
Counter Name
Number of Other Triggered RRC Re-establishment Failures due to Other Reason
1-45
Short Name
RRC.ConnReEstabFail.Other.OtherReason
Counter Description
For other reason, the eNodeB sends an RRCConnectionRelease message to the UE and
the ReestablishmentCause is otherfailures.Each failed RRC connection re-establishment
is added to the counter.
Triggering Point
When the eNodeB occurs the RRC Connection Re-establishment failures due to other
reason,and the ReestablishmentCause is otherfailures.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the RRC Connection
Re-establishment failures due to other reason,and the ReestablishmentCause is
otherfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.19 C373200089
Counter Name
Number of RRC Connection Re-establishment Request Triggered by Handover Failure
Short Name
RRC.AttConnReestab.Handover
Counter Description
The eNodeB receives a RRCConnectionReestablishmentRequest message
from the UE and the ReestablishmentCause is handoverfailures.Each
RRCConnectionReestablishmentRequest message received is added to the counter.
1-46
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE and the ReestablishmentCause is handoverfailures.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE and the
ReestablishmentCause is handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.20 C373200090
Counter Name
Number of RRC Connection Re-establishment Request Triggered by Reconfig Failure
Short Name
RRC.AttConnReestab.Reconfig
Counter Description
The eNodeB receives a RRCConnectionReestablishmentRequest message
from the UE and the ReestablishmentCause is reconfigurationfailures.Each
RRCConnectionReestablishmentRequest message received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE and the ReestablishmentCause is reconfigurationfailures.
Refer to Sampling Point 1.
1-47
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE and the
ReestablishmentCause is reconfigurationfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.21 C373200091
Counter Name
Number of RRC Connection Re-establishment Request Triggered by Other
Short Name
RRC.AttConnReestab.Other
Counter Description
The eNodeB receives a RRCConnectionReestablishmentRequest message
from the UE and the ReestablishmentCause is otherfailures.Each
RRCConnectionReestablishmentRequest message received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE and and the ReestablishmentCause is otherfailures.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE and the
ReestablishmentCause is otherfailures.
Counter Type
Accumulated value
1-48
Sampling Period
Event triggered
Unit
times
1.2.3.22 C373200097
Counter Name
Number of inter-RAT Successful RRC Connection Re-establishment Triggerd by Handover
Failure
Short Name
RRC.InterRat.ConnReEstabSucc
Counter Description
Receipt by the eNodeB of a RRCConnectionReestablishmentComplete message following
a RRCConnectionReestablishmentRequest in which ReestablishmentCause is inter-RAT
handoverfailures. Each RRCConnectionReestablishmentComplete message received is
added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentComplete message from
the UE,and the ReestablishmentCause is inter-RAT handoverfailures.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentComplete message from the UE and the
ReestablishmentCause is inter-RAT handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-49
1.2.3.23 C373200098
Counter Name
Number of inter-RAT Handover Failure Triggered RRC Re-establishment Failures due to
RRC Reestablish Complete Timeout
Short Name
RRC.InterRat.ConnReEstabFail.timeout
Counter Description
The timer expires for an expected RRCConnectionReestablishmentComplete message
not received by the eNodeB and the ReestablishmentCause is inter-RAT handoverfailures.
Each failed RRC connection re-establishment is added to the counter.
Triggering Point
When the timer of waiting for the RRCConnectionReestablishmentComplete message
expires,and the ReestablishmentCause is inter-RAT handoverfailures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's waiting for the
RRCConnectionReestablishmentComplete timer expires,and the ReestablishmentCause
is inter-RAT handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.24 C373200099
Counter Name
Number of inter-RAT Handover Failure Triggered RRC Re-establishment Failures due to
ENB Admission Failure
1-50
Short Name
RRC.InterRat.ConnReEstabFail.AdmissionFail
Counter Description
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is inter-RAT handoverfailures.Each
failed RRC connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE
due to admission failures ,and the ReestablishmentCause is inter-RAT handoverfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to admission failures
,and the ReestablishmentCause is inter-RAT handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.25 C373200100
Counter Name
Number of inter-RAT Handover Failure Triggered RRC Re-establishment Failures due to
UE Context Not Found
Short Name
RRC.InterRat.ConnReEstabFail.UeCtxtNotFound
Counter Description
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject
message to the UE and the ReestablishmentCause is inter-RAT handoverfailures.Each
failed RRC connection re-establishment is added to the counter.
1-51
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the
UE due to unknown UE identification,and the ReestablishmentCause is inter-RAT
handoverfailures.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE due to no finding the UE
context,and the ReestablishmentCause is inter-RAT handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.26 C373200101
Counter Name
Number of inter-RAT Handover Failure Triggered RRC Re-establishment Failures due to
Continue Re-establishment
Short Name
RRC.InterRat.ConnReEstabFail.ContinueReestab
Counter Description
For again reestablishment, the eNodeB sends an RRCConnectionRelease message to
the UE and the ReestablishmentCause is inter-RAT handoverfailures.Each failed RRC
connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due
to again receiving the RRCConnectionReestablishmentRequest message,and the
ReestablishmentCause is inter-RAT handoverfailures.
1-52
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE due to again receiving the RRCConnectionReestablishmentRequest
message,and the ReestablishmentCause is inter-RAT handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.2.3.27 C373200102
Counter Name
Number of inter-RAT Handover Failure Triggered RRC Re-establishment Failures due to
Other Reason
Short Name
RRC.InterRat.ConnReEstabFail.OtherReason
Counter Description
For other reason, the eNodeB sends an RRCConnectionRelease message to the UE and
the ReestablishmentCause is inter-RAT handoverfailures.Each failed RRC connection
re-establishment is added to the counter.
Triggering Point
When the eNodeB occurs the RRC Connection Re-establishment failures due to other
reason,and the ReestablishmentCause is inter-RAT handoverfailures.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the RRC Connection
Re-establishment failures due to other reason,and the ReestablishmentCause is
inter-RAT handoverfailures.
Counter Type
Accumulated value
1-53
Sampling Period
Event triggered
Unit
times
1.2.3.28 C373200103
Counter Name
Number of inter-RAT RRC Connection Re-establishment Request Triggered by Handover
Failure
Short Name
RRC.InterRat.ConnReEstabReq
Counter Description
Receipt by the eNodeB of RRCConnectionReestablishmentRequest
in which ReestablishmentCause is inter-RAT handoverfailures. Each
RRCConnectionReestablishmentRequest message received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message ,and
the ReestablishmentCause is inter-RAT handoverfailures.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message ,and the ReestablishmentCause
is inter-RAT handoverfailures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-54
1.2.3.29 C373200140
Counter Name
Number of Successful RRC Connection Re-establishment excluding the Source Cell
Re-establishment
Short Name
Counter Description
After the eNodeB receives an RRCConnectionReestablishmentRequest
message from a UE and admission control is performed, it sends the UE an
RRCConnectionReestablishmentSetup message. After that, the eNodeB waits for the
RRCConnectionReestablishmentComplete message. If the UE is from other cells, this
counter counts the number of RRCConnectionReestablishmentComplete messages that
the eNodeB receives before the timer expires.
Triggering Point
If a UE from other cells reestablishes an RRC connection in this cell, when the eNodeB
receives an RRCConnectionReestablishmentComplete message from the UE, this counter
is updated.
Refer to Sampling Point 3.
Update Description
If an UE from other cells reestablishes an RRC connection in this cell, when the eNodeB
receives an RRCConnectionReestablishmentComplete message from the UE, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-55
1-56
2 C373200079 Number of RRC Connection Reconfig Failure due to Radio Link Failure
Counter Name
Number of Successful RRC Connection Reconfig
Short Name
RRC.ConnReconfigSucc
Counter Description
Receipt by the eNodeB of a RRCConnectionReconfigurationComplete message
following a RRC connection reconfigration during non-handover procedure. Each
RRCConnectionReconfigurationComplete message received is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
the UE.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from UE during non-Handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
1-57
Unit
times
1.3.3.2 C373200079
Counter Name
Number of RRC Connection Reconfig Failure due to Radio Link Failure
Short Name
RRC.ConnReconfigFail.RadioLinkFail
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB during non-handover procedure. the above failed RRC connection
Reconfigration is added to the counter.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires during non-Handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.3.3.3 C373200080
Counter Name
Number of RRC Connection Reconfig Failure due to Other
1-58
Short Name
RRC.ConnReconfigFail.Other
Counter Description
For other reason, an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB during non-handover procedure. the above failed RRC connection
Reconfigration is added to the counter.
Triggering Point
When the eNodeB occurs the RRC connection reconfiguration failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the RRC connection
reconfiguration failures due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.3.3.4 C373200081
Counter Name
Number of RRC Connection Reconfig Failure due to RRC Re-establishment
Short Name
RRC.ConnReconfigFail.Reest
Counter Description
For again reestablishment, RRCConnectionReconfigurationComplete message not
received by the eNodeB during non-handover procedure. the above failed RRC
connection Reconfigration is added to the counter.
1-59
Triggering Point
When the eNodeB again receives the RRCConnectionReestablishmentRequest message
from UE during waiting for the RRCConnectionReconfigurationComplete message.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB again receives the
RRCConnectionReestablishmentRequest message from UE during waiting for the
RRCConnectionReconfigurationComplete message. This excludes Handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.3.3.5 C373200082
Counter Name
Number of Attempted RRC connection re-configurations
Short Name
Counter Description
Transmission of a RRCConnectionReconfiguration message by the eNodeB to the UE
during non-Handover procedure. Each RRCConnectionReconfiguration received is added
to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to the UE during
non-Handover procedure..
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to the UE during non-Handover procedure.
1-60
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
l Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
4 C373200023 Number of RRC Connection Release due to Shut Down or Reset Cell
1-61
17 C373200051 Number of RRC Connection Release due to ENB Radio Link Failure
Counter Name
Number of RRC Connection Release due to UserInactive Release
Short Name
RRC.ConnRel.UseInactive
Counter Description
The eNodeB sends the RRCConnectionRelease message to the UE when detecting no
data in UL and DL buffer within configuration threshold. The counter is used to count the
number of this RRC Connection Release message.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE, with release
cause of UserInactive.
Refer to Sampling Point 1.
1-62
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of UserInactive.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.2 C373200021
Counter Name
Number of RRC Connection Release by MME due to UE Context Release
Short Name
RRC.ConnRel.CNRelease
Counter Description
The eNodeB receives the UEContextReleaseCommand message from the MME, in which
the Cause is Normal Release, Detach , Authentication failureorInteraction with other
procedure. The counter is used to count the number of RRC Connection Release initiated
by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Normal Relase, Detach, Authentication failure or
Interaction with other procedure.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME and then sends
RRCConnectionRelease message to UE.
Counter Type
Accumulated value
1-63
Sampling Period
Event triggered
Unit
times
1.4.3.3 C373200022
Counter Name
Number of RRC Connection Release by ENB due to Unavailable Resource
Short Name
RRC.ConnRel.UnavailableRes
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the appropriate UE
release after detecting cell overloading. The counter is used to count the number of RRC
Connection Release initiated by eNodeB due to the above condition.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due to detecting
cell overload.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of overload.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-64
1.4.3.4 C373200023
Counter Name
Number of RRC Connection Release due to Shut Down or Reset Cell
Short Name
RRC.ConnRel.CellResetOrBlock
Counter Description
When the eNodeB receives the cell block command or occurs cell reset triggerd by warning
or other reason, will sends the RRCConnectionRelease message to the UE. The counter
is used to count the number of RRC Connection Release initiated by eNodeB due to the
above condition.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE after receiving
the cell block command or reset command.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of cell block or reset.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.5 C373200024
Counter Name
Number of RRC Connection Release by ENB due to Other Cause
Short Name
RRC.ConnRel.OtherReason
1-65
Counter Description
The eNodeB sends the RRCConnectionRelease message to the UE when detecting some
failures for internal reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due to other
reason.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.6 C373200034
Counter Name
Number of RRC Connection Release due to UE Context Setup Timeout
Short Name
RRC.ConnRel.eNodebUeContextTimeOut
Counter Description
After the eNodeB sends initialUEMessage to MME, the RRCConnectionRelease
message is transmitted to UE by eNodeB when the timer of waiting for the
InitialContextSetupRequest message expires. The RRCConnectionRelease message is
added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE, with release
cause of timeout waiting for the InitialUE ContextSetup message.
Refer to Sampling Point 1.
1-66
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of timeout of waiting for the InitialUE ContextSetup
message.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.7 C373200035
Counter Name
Number of RRC Connection Release due to Uu interface Timeout
Short Name
RRC.ConnRel.eNodebUuTimeOut
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. When the RNLC detects the expiry of the Uu interface
signaling timer and sends an RRCConnectionRelease message to the UE, this counter is
incremented. The corresponding release cause is reported to "C373200051 Number of
RRC Connection Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC detects the expiry of the Uu interface signaling timer and sends an
RRCConnectionRelease message to the UE, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC detects the expiry of the Uu interface signaling timer and sends an
RRCConnectionRelease message to the UE, this counter is incremented by one.
Counter Type
Accumulated value
1-67
Sampling Period
Event triggered
Unit
times
1.4.3.8 C373200036
Counter Name
Number of RRC Connection Release due to RLF triggered by Poor Uu Quality
Short Name
RRC.ConnRel.eNodebRlfPoorUuQua
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. This counter is incremented when the RNLC receives
an RLF message reported by the CMAC indicating an invalid uplink SRS measurement,
high uplink or downlink HARQFail, and sends an RRCConnectionRelease message to
the UE.The corresponding release cause is reported to "C373200051 Number of RRC
Connection Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC receives an RLF message reported by the CMAC indicating an
invalid uplink SRS measurement, high uplink or downlink HARQFail, and sends an
RRCConnectionRelease message to the UE, this counter is updated.
Update Description
When the RNLC receives an RLF message reported by the CMAC indicating an
invalid uplink SRS measurement, high uplink or downlink HARQFail, and sends an
RRCConnectionRelease message to the UE. this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
1-68
Unit
times
1.4.3.9 C373200037
Counter Name
Number of RRC Connection Release due to Maximum of RLC Retransmission
Short Name
RRC.ConnRel.eNodebMaxRlcRetrans
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. This counter is incremented when the RNLC
receives an RNLU error message that indicates an RLC error, and sends an
RRCConnectionRelease message to the UE.The corresponding release cause is reported
to "C373200051 Number of RRC Connection Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates an RLC error, and sends
an RRCConnectionRelease message to the UE, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC receives an RNLU error message that indicates an RLC error, and sends
an RRCConnectionRelease message to the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.10 C373200038
Counter Name
Number of RRC Connection Release due to PDCP Integrity protection Failure
1-69
Short Name
RRC.ConnRel.eNodebPdcpInteProFail
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. This counter is incremented when the RNLC
receives an RNLU error message that indicates a PDCP error, and sends an
RRCConnectionRelease message to the UE.The corresponding release cause is reported
to "C373200051 Number of RRC Connection Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates a PDCP error, and sends
an RRCConnectionRelease message to the UE, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC receives an RNLU error message that indicates a PDCP error, and sends
an RRCConnectionRelease message to the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.11 C373200039
Counter Name
Number of RRC Connection Release due to GTPU Error Indication
Short Name
RRC.ConnRel.eNodebGtpuErrInd
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. This counter is incremented when the RNLC receives an
RNLU error message that indicates a GTPU error, and sends an RRCConnectionRelease
1-70
Triggering Point
When the RNLC receives an RNLU error message that indicates a GTPU error, and sends
an RRCConnectionRelease message to the UE, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC receives an RNLU error message that indicates a GTPU error, and sends
an RRCConnectionRelease message to the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.12 C373200040
Counter Name
Number of RRC Connection Release due to Path Fault
Short Name
RRC.ConnRel.eNodebPathFault
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. This counter is incremented when the RNLC receives a
PATH fault reported by the RNLU, which triggers all UE being released under this path, and
sends an RRCConnectionRelease message to the UE.The corresponding release cause
is reported to "C373200053 Number of RRC Connection Release due to S1 Link Failure".
Triggering Point
When the RNLC receives a PATH fault reported by the RNLU, and sends an
RRCConnectionRelease message to the UE, this counter is updated.
Refer to Sampling Point 1.
1-71
Update Description
When the RNLC receives a PATH fault reported by the RNLU, and sends an
RRCConnectionRelease message to the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.13 C373200041
Counter Name
Number of RRC Connection Release due to Optical Port Fault
Short Name
RRC.ConnRel.eNodebOpticalFault
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. This counter is incremented when the RNLC receives
an OAM optical interface fault, which triggers all UE being released under this path, and
sends an RRCConnectionRelease message to the UE.The corresponding release cause
is reported to "C373200053 Number of RRC Connection Release due to S1 Link Failure".
Triggering Point
When the RNLC receives an OAM optical interface fault, and sends an
RRCConnectionRelease message to the UE, this counter is updated.
Update Description
When the RNLC receives an OAM optical interface fault, and sends an
RRCConnectionRelease message to the UE, this counter is incremented by one.
Counter Type
Accumulated value
1-72
Sampling Period
Event triggered
Unit
times
1.4.3.14 C373200048
Counter Name
Number of RRC Connection Release by ENB due to UE Not Online
Short Name
RRC.ConnRel.UENotOnline
Counter Description
The eNodeB sends the RRCConnectionRelease message to the UE when detecting UE
not online, the counter is used to count the number of this RRC Connection Release
message.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE, with release
cause of UE not online.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of UE not online.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-73
1.4.3.15 C373200049
Counter Name
Number of RRC Connection Release By MME due to Error Indication or Reestablish inter
eNB
Short Name
RRC.ConnRel.MMEErrInd
Counter Description
The counter is used to count the number of RRC Connection Release initiated by MME
due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context;
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the ErrorIndication message
or UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.16 C373200050
Counter Name
Number of RRC Connection Release due to ENB Redirection
1-74
Short Name
RRC.ConnRel.eNodebRedirection
Counter Description
When the eNodeB judges the UE to access redirection condition,sends the
RRCConnectionRelease messages to the UE in which redirectedCarrierInfo is set to
on. This message is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE, with release
cause of redirection.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of redirection.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.17 C373200051
Counter Name
Number of RRC Connection Release due to ENB Radio Link Failure
Short Name
RRC.ConnRel.RadioLinkFailure
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the eNodeB to UE, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
1-75
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE because of
detecting radio link failures.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE, with release cause of RLF.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.18 C373200052
Counter Name
Number of RRC Connection Release due to Re-establishment Fail
Short Name
RRC.ConnRel.ReestFail
Counter Description
Transmission of an RRCConnectionReestablishmentReject message by the eNodeB to
the UE.
Each above failed RRC connection re-establishment is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReestablishmentReject message to the UE.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReestablishmentReject message to the UE.
1-76
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.19 C373200053
Counter Name
Number of RRC Connection Release due to S1 Link Fail
Short Name
RRC.ConnRel.S1LinkFail
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due to detecting
S1 link fault.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE because of detecting S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
1-77
Unit
times
1.4.3.20 C373200054
Counter Name
Number of RRC Connection Release By MME due to Other Reason
Short Name
RRC.ConnRel.MMELoadOrReset
Counter Description
The eNodeB receives the UEContextReleaseCommand message from MME, in which
the cause excludes Normal Release, Detach ,Authentication failure , Successful
Handover,Failure in the Radio Interface Procedure and Interaction with other procedure.
The counter is used to count the number of RRC connection Release initiated by MME
due to the above condition.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to UE after receiving the
UEContextReleaseCommand message from MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to UE after receiving the UEContextReleaseCommand message from MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1.4.3.21 C373200083
Counter Name
Number of RRC Connection Releases due to Handover Failure
1-78
Short Name
-
Counter Description
Transmission of an RRCConnectionRelease message by the eNodeB to the UE due to
an expected UEContextReleaseCommand or UEContextRelease message indicating
handover complete not received by the eNodeB. Each above RRCConnectionRelease
message sent is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE due to handover
failures
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE due to handover failures
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
1-79
l Sampling Point 1: When the EUTRAN receives the RRC CONNECTION SETUP
COMPLETE message from the UE, indicating that the RRC connection has been
setup successfully, the RRC connection number is incremented by 1.
l Sampling Point 2: When the EUTRAN sends the RRC CONNECTION RELEASE
message to the UE, the RRC connection number is decreased by 1.
1-80
Counter Name
Maximum Number of RRC Connection User
Short Name
RRC.ConnMax
Counter Description
The sampling rule of RRC Connection Establishment User is as follows:
When the eNodeB receives the RRCConnectionSetupComplete message from the UE,
the RRC user number is increased by 1;
When the UE enter into the cell from other cell due to handover, the RRC user number is
increased by 1;
When the eNodeB triggers UE release, the RRC user number is decreased by 1;
When the UE get out the cell due to handover, the RRC user number is increased by 1.
Triggering Point
The eNodeB collects the number of RRC user at sampling time.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is replaced with the new value when the RRC setup user in a sampling point
is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
1-81
Unit
unit
1.5.3.2 C373200030
Counter Name
Mean Number of RRC Connection User
Short Name
RRC.ConnMean
Counter Description
The sampling rule of RRC Connection Establishment User is as follows:
When the eNodeB receives the RRCConnectionSetupComplete message from the UE,
the RRC user number is increased by 1;
When the UE enter into the cell from other cell due to handover,the RRC user number is
increased by 1;
When the eNodeB triggers UE release, the RRC user number is decreased by 1;
When the UE get out the cell due to handover, the RRC user number is increased by 1.
Triggering Point
The eNodeB collects the number of RRC user at sampling time.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is updated by taking the arithmetic mean of RRC connection setup user among
sampling points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
1-82
1.5.3.3 C373200031
Counter Name
Online Number of RRC Connection User
Short Name
RRC.ConnOnline
Counter Description
The sampling rule of RRC Connection Establishment User is as follows:
When the eNodeB receives the RRCConnectionSetupComplete message from the UE,
the RRC user number is increased by 1;
When the UE enter into the cell from other cell due to handover, the RRC user number is
increased by 1;
When the eNodeB triggers UE release, the RRC user number is decreased by 1;
When the UE get out the cell due to handover, the RRC user number is increased by 1.
Triggering Point
The eNodeB collects the number of RRC user at sampling time.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is updated by the RRC connection setup user at last sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
1.5.3.4 C373940406
Counter Name
Maximum Number of RRC Connection User (eNB)
1-83
Short Name
ENB.RRC.ConnMax
Counter Description
The sampling rule of RRC Connection Establishment User is as follows:
When the eNodeB receives the RRCConnectionSetupComplete message from the UE,
the RRC user number is increased by 1;
When the UE enter into the eNodeB from other eNodeB due to handover, the RRC user
number is increased by 1;
When the eNodeB triggers UE release, the RRC user number is decreased by 1;
When the UE get out the eNodeB due to handover, the RRC user number is increased by
1.
Triggering Point
The eNodeB collects the number of RRC user at sampling time according to "Explanation".
Update Description
The counter is replaced by the RRC Connection Establishment User in current sampling
point if it is larger than the prior in measurement period.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
1.5.3.5 C373940407
Counter Name
Mean Number of RRC Connection User (eNB)
Short Name
ENB.RRC.ConnMean
Counter Description
The sampling rule of RRC Connection Establishment User is as follows:
1-84
When the eNodeB receives the RRCConnectionSetupComplete message from the UE,
the RRC user number is increased by 1;
When the UE enter into the eNodeB from other eNodeB due to handover, the RRC user
number is increased by 1;
When the eNodeB triggers UE release, the RRC user number is decreased by 1;
When the UE get out the eNodeB due to handover, the RRC user number is increased by
1.
Triggering Point
The eNodeB collects the number of RRC user at sampling time according to "Explanation".
Update Description
The counter is updated by the mean number of RRC Connection establishment User in
measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
1.5.3.6 C373940408
Counter Name
Online Number of RRC Connection User (eNB)
Short Name
ENB.RRC.ConnOnline
Counter Description
The sampling rule of RRC Connection Establishment User is as follows:
When the eNodeB receives the RRCConnectionSetupComplete message from the UE,
the RRC user number is increased by 1;
When the UE enter into the eNodeB from other eNodeB due to handover, the RRC user
number is increased by 1;
When the eNodeB triggers UE release, the RRC user number is decreased by 1;
1-85
When the UE get out the eNodeB due to handover, the RRC user number is increased by
1.
Triggering Point
The eNodeB collects the number of RRC user at sampling time according to "Explanation".
Update Description
The counter is replaced by the RRC Connection establishment User at the last sampling
point in measurement period.
Counter Type
Current value
Sampling Period
2s
Unit
unit
1.5.3.7 C373940409
Counter Name
License Number of RRC Connection User (eNB)
Short Name
ENB.RRC.ConnLicense
Counter Description
This counter counts the number of licensed users configured in an eNodeB.
Triggering Point
This counter counts the number of licensed users configured in an eNodeB.
Update Description
This counter is updated to the latest number of licensed users configured in an eNodeB.
Counter Type
Current value
1-86
Sampling Period
2s
Unit
unit
l Sampling 1: The eNodeb records the start time when it receives the
RRCConnectionRequest message from UE.
l Sampling 2: The eNodeb records the end time when it receives the
RRCConnectionRequest message from UE.
1-87
l Sampling Point 1: The eNodeb records the start time when it receives the
RRCConnectionRequest message from UE.
l Sampling Point 2: The eNodeb records the end time when it receives the RRCConnec-
tionReconfigurationComplete message from UE, indicating that the RRC connection
configuration has been configed successfully.
Counter Name
Sum Time of RRC Connection Setup
1-88
Short Name
RRC.ConnEstabTimeSum
Counter Description
The sum time intervals for a successful RRC connection establishment between the receipt
of a RRCConnectionRequest and the corresponding RRCConnectionSetupComplete
message by the eNodeB. The counter provides the sum RRC connection establishment
time.
Triggering Point
When the eNodeB receives the RRCConnectionSetupRequest message from UE, record
the start time. Then receiving the RRCConnectionSetupComplete message from UE,
record the end time.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is updated by taking the sum of the RRC connection setup time among
sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
1.6.3.2 C373200033
Counter Name
Maximum Time of RRC Connection Setup
Short Name
RRC.ConnEstabTimeMax
Counter Description
The time intervals for a successful RRC connection establishment between the receipt
of a RRCConnectionRequest and the corresponding RRCConnectionSetupComplete
1-89
message by the eNodeB. The counter provides the mean RRC connection establishment
time.
Triggering Point
When the eNodeB receives the RRCConnectionSetupRequest message from UE, record
the start time. Then receiving the RRCConnectionSetupComplete message from UE,
record the end time.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is replaced with the current value when the RRC setup time in a sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
1-90
2-1
l Sampling Point 1: The EUTRAN receives the INITIAL CONTEXT SETUP REQUEST
message from the MME.
l Sampling Point 2: The EUTRAN sends the RRC CONNECTION
RECONFIGURATION message to the UE.
l Sampling Point 3: The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
l Sampling Point 4: The EUTRAN sends the INITIAL CONTEXT SETUP RESPONSE
message to the MME, indicating that the E-RAB Establishment has been set up
successfully.
l Sampling Point 5: The EUTRAN does not receive the
RRCConnectionReconfigurationComplete message from the UE, and the timer
2-2
expires. Then EUTRAN sends the INITIAL CONTEXT SETUP FAILURE message
to the MME.
l Sampling Point 6: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of not UE context.
l Sampling Point 7: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of AS failure.
l Sampling Point 8: The EUTRAN receives the RRC CONNECTION
REESTABLISHMENT REQUEST message from the UE.
2 C373210201 Number of Initial QCI1 E-RAB Setup Failures due to ENB Admission Failure
3 C373210202 Number of Initial QCI1 E-RAB Setup Failures due to Uu interface Failure
4 C373210203 Number of Initial QCI1 E-RAB Setup Failures due to Security Failure
5 C373210204 Number of Initial QCI1 E-RAB Setup Failures due to Parameter Error
6 C373210205 Number of Initial QCI1 E-RAB Setup Failures due to Other Reason
8 C373210207 Number of Initial QCI2 E-RAB Setup Failures due to ENB Admission Failure
9 C373210208 Number of Initial QCI2 E-RAB Setup Failures due to Uu interface Failure
10 C373210209 Number of Initial QCI2 E-RAB Setup Failures due to Security Failure
11 C373210210 Number of Initial QCI2 E-RAB Setup Failures due to Parameter Error
12 C373210211 Number of Initial QCI2 E-RAB Setup Failures due to Other Reason
14 C373210213 Number of Initial QCI3 E-RAB Setup Failures due to ENB Admission Failure
15 C373210214 Number of Initial QCI3 E-RAB Setup Failures due to Uu interface Failure
16 C373210215 Number of Initial QCI3 E-RAB Setup Failures due to Security Failure
17 C373210216 Number of Initial QCI3 E-RAB Setup Failures due to Parameter Error
18 C373210217 Number of Initial QCI3 E-RAB Setup Failures due to Other Reason
20 C373210219 Number of Initial QCI4 E-RAB Setup Failures due to ENB Admission Failure
21 C373210220 Number of Initial QCI4 E-RAB Setup Failures due to Uu interface Failure
22 C373210221 Number of Initial QCI4 E-RAB Setup Failures due to Security Failure
23 C373210222 Number of Initial QCI4 E-RAB Setup Failures due to Parameter Error
24 C373210223 Number of Initial QCI4 E-RAB Setup Failures due to Other Reason
2-3
26 C373210225 Number of Initial QCI5 E-RAB Setup Failures due to ENB Admission Failure
27 C373210226 Number of Initial QCI5 E-RAB Setup Failures due to Uu interface Failure
28 C373210227 Number of Initial QCI5 E-RAB Setup Failures due to Security Failure
29 C373210228 Number of Initial QCI5 E-RAB Setup Failures due to Parameter Error
30 C373210229 Number of Initial QCI5 E-RAB Setup Failures due to Other Reason
32 C373210231 Number of Initial QCI6 E-RAB Setup Failures due to ENB Admission Failure
33 C373210232 Number of Initial QCI6 E-RAB Setup Failures due to Uu interface Failure
34 C373210233 Number of Initial QCI6 E-RAB Setup Failures due to Security Failure
35 C373210234 Number of Initial QCI6 E-RAB Setup Failures due to Parameter Error
36 C373210235 Number of Initial QCI6 E-RAB Setup Failures due to Other Reason
38 C373210237 Number of Initial QCI7 E-RAB Setup Failures due to ENB Admission Failure
39 C373210238 Number of Initial QCI7 E-RAB Setup Failures due to Uu interface Failure
40 C373210239 Number of Initial QCI7 E-RAB Setup Failures due to Security Failure
41 C373210240 Number of Initial QCI7 E-RAB Setup Failures due to Parameter Error
42 C373210241 Number of Initial QCI7 E-RAB Setup Failures due to Other Reason
44 C373210243 Number of Initial QCI8 E-RAB Setup Failures due to ENB Admission Failure
45 C373210244 Number of Initial QCI8 E-RAB Setup Failures due to Uu interface Failure
46 C373210245 Number of Initial QCI8 E-RAB Setup Failures due to Security Failure
47 C373210246 Number of Initial QCI8 E-RAB Setup Failures due to Parameter Error
48 C373210247 Number of Initial QCI8 E-RAB Setup Failures due to Other Reason
50 C373210249 Number of Initial QCI9 E-RAB Setup Failures due to ENB Admission Failure
51 C373210250 Number of Initial QCI9 E-RAB Setup Failures due to Uu interface Failure
52 C373210251 Number of Initial QCI9 E-RAB Setup Failures due to Security Failure
53 C373210252 Number of Initial QCI9 E-RAB Setup Failures due to Parameter Error
54 C373210253 Number of Initial QCI9 E-RAB Setup Failures due to Other Reason
55 C373210580 Number of Initial QCI1 E-RAB Setup Failures due to Transport Cause
56 C373210581 Number of Initial QCI2 E-RAB Setup Failures due to Transport Cause
2-4
57 C373210582 Number of Initial QCI3 E-RAB Setup Failures due to Transport Cause
58 C373210583 Number of Initial QCI4 E-RAB Setup Failures due to Transport Cause
59 C373210584 Number of Initial QCI5 E-RAB Setup Failures due to Transport Cause
60 C373210585 Number of Initial QCI6 E-RAB Setup Failures due to Transport Cause
61 C373210586 Number of Initial QCI7 E-RAB Setup Failures due to Transport Cause
62 C373210587 Number of Initial QCI8 E-RAB Setup Failures due to Transport Cause
63 C373210588 Number of Initial QCI9 E-RAB Setup Failures due to Transport Cause
65 C373505375 Number of Initial QCI1 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
66 C373505376 Number of Initial QCI2 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
67 C373505377 Number of Initial QCI3 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
68 C373505378 Number of Initial QCI4 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
69 C373505379 Number of Initial QCI5 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
70 C373505380 Number of Initial QCI6 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
71 C373505381 Number of Initial QCI7 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
72 C373505382 Number of Initial QCI8 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
73 C373505383 Number of Initial QCI9 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
2-5
85 C373505474 Number of Initial E-RAB Setup Failures due to ENB Admission Failure
Counter Name
Number of Initial QCI1 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI1
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI1 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI1 E-RAB.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI1 E-RAB.
2-6
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.2 C373210201
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI1
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI1 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI1 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI1 E-RAB. But when the eNodeB QCI1 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB occurs QCI1
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-7
Unit
unit
2.1.3.3 C373210202
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI1
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI1 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due
to timeout of waiting for the RRCConnectionReconfigurationComplete message,in
which the E-RAB Setup List includes the QCI1 E-RAB. But when eNodeB replies the
InitialContextSetupFailure message to MME due to the above same.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-8
2.1.3.4 C373210203
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI1
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI1 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI1 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.5 C373210204
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI1
2-9
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI1 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI1 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.6 C373210205
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI1
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI1 E-RAB failed to establish is added to the
counter.
2-10
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI1 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.7 C373210206
Counter Name
Number of Initial QCI2 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI2
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI2 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI2 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI2 E-RAB.
2-11
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.8 C373210207
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI2
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI2 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI2 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI2 E-RAB. But when the eNodeB QCI2 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB occurs QCI2
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-12
Unit
unit
2.1.3.9 C373210208
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI2
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI2 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-13
2.1.3.10 C373210209
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI2
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI2 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI2 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.11 C373210210
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI2
2-14
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI2 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.12 C373210211
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI2
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI2 E-RAB failed to establish is added to the
counter.
2-15
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.13 C373210212
Counter Name
Number of Initial QCI3 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI3
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI3 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI3 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI3 E-RAB.
2-16
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.14 C373210213
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI3
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI3 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI3 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI3 E-RAB. But when the eNodeB QCI3 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB occurs QCI3
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-17
Unit
unit
2.1.3.15 C373210214
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI3
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI3 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI3 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-18
2.1.3.16 C373210215
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI3
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI3 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI3 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.17 C373210216
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI3
2-19
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI3 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI3 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.18 C373210217
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI3
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI3 E-RAB failed to establish is added to the
counter.
2-20
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI3 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.19 C373210218
Counter Name
Number of Initial QCI4 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI4
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI4 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI4 E-RAB.
2-21
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.20 C373210219
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI4
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI4 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI4 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI4 E-RAB. But when the eNodeB QCI4 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB occurs QCI4
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-22
Unit
unit
2.1.3.21 C373210220
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI4
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI4 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI4 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-23
2.1.3.22 C373210221
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI4
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI4 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI4 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.23 C373210222
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI4
2-24
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI4 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI4 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.24 C373210223
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI4
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI4 E-RAB failed to establish is added to the
counter.
2-25
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI4 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.25 C373210224
Counter Name
Number of Initial QCI5 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI5
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI5 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB for every QCI5 E-RAB when
eNodeB sends the InitialContextSetupResponse message to MME and the E-RAB Setup
List IE includes the QCI5 E-RAB.
2-26
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.26 C373210225
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI5
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI5 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI5 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI5 E-RAB. But when the eNodeB QCI5 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB occurs QCI5
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-27
Unit
unit
2.1.3.27 C373210226
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI5
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI5 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI5 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-28
2.1.3.28 C373210227
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI5
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI5 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI5 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.29 C373210228
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI5
2-29
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI5 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI5 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.30 C373210229
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI5
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI5 E-RAB failed to establish is added to the
counter.
2-30
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI5 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.31 C373210230
Counter Name
Number of Initial QCI6 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI6
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI6 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI6 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI6 E-RAB.
2-31
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.32 C373210231
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI6
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI6 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI6 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI6 E-RAB. But when the eNodeB QCI6 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB occurs QCI6
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-32
Unit
unit
2.1.3.33 C373210232
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI6
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI6 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI6 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-33
2.1.3.34 C373210233
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI6
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI6 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI6 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.35 C373210234
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI6
2-34
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI6 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI6 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.36 C373210235
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI6
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI6 E-RAB failed to establish is added to the
counter.
2-35
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI6 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.37 C373210236
Counter Name
Number of Initial QCI7 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI7
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI7 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
to Setup List includes QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB to Setup List includes the
QCI7 E-RAB.
2-36
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.38 C373210237
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI7
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI7 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI7 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI7 E-RAB. But when the eNodeB QCI7 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB occurs QCI7
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-37
Unit
unit
2.1.3.39 C373210238
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI7
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI7 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI7 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-38
2.1.3.40 C373210239
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI7
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI7 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI7 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.41 C373210240
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI7
2-39
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI7 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI7 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.42 C373210241
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI7
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI7 E-RAB failed to establish is added to the
counter.
2-40
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI7 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.43 C373210242
Counter Name
Number of Initial QCI8 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI8
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI8 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI8 E-RAB.
2-41
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.44 C373210243
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI8
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI8 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI8 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI8 E-RAB. But when the eNodeB QCI8 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB occurs QCI8
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-42
Unit
unit
2.1.3.45 C373210244
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI8
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI8 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI8 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-43
2.1.3.46 C373210245
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI8
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI8 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI8 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.47 C373210246
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI8
2-44
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI8 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI8 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.48 C373210247
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI8
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI8 E-RAB failed to establish is added to the
counter.
2-45
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI8 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.49 C373210248
Counter Name
Number of Initial QCI9 E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr.QCI9
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each QCI9 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME, and the E-RAB
Setup List IE includes QCI9 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
QCI9 E-RAB.
2-46
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.50 C373210249
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFailQCI9
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each QCI9 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB QCI9 E-RAB admission failures occur,eNodeB replies the
InitialContextSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI9 E-RAB. But when the eNodeB QCI9 E-RAB admission failures occur,
eNodeB replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB occurs QCI9
E-RAB admission failures then sends the InitialContextSetupResponse message to MME,
in which the E-RAB Failed to Setup List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-47
Unit
unit
2.1.3.51 C373210250
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFailQCI9
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE,
or INITIAL CONTEXT SETUP FAILURE message to the MME, in which each QCI9 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
timeout of waiting for the RRCConnectionReconfigurationComplete message,and the
E-RAB Setup List includes the QCI9 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Setup List includes
the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-48
2.1.3.52 C373210251
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFailQCI9
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each QCI9 E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB QCI9 E-RAB failed to setup due to security mode failures,eNodeB
replies the InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to security mode failures,and the
E-RAB Setup List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.53 C373210252
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErrQCI9
2-49
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each QCI9 E-RAB failed to establish is added to
the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to
message parameter error ,and the E-RAB Failed to Setup List includes the QCI9 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to message parameter error,and the
E-RAB Failed to Setup List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.54 C373210253
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.OtherQCI9
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each QCI9 E-RAB failed to establish is added to the
counter.
2-50
Triggering Point
When the eNodeB replies the InitialContextSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI9 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME due to other reason,and the E-RAB
Failed to Setup List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.55 C373210580
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI1
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
When the eNodeB processes the InitialContextSetupRequest message, if transmission is
not available, an E-RAB fails to be set up.
This counter counts the number of QCI1 E-RABs contained in the E-RAB Failed to Setup
List IE due to unavailable transmission.
2-51
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI1 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI1 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.56 C373210581
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI2
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-52
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI2 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI2 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.57 C373210582
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI3
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-53
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI3 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI3 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.58 C373210583
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI4
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-54
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI4 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI4 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.59 C373210584
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI5
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-55
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI5 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI5 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.60 C373210585
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI6
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-56
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI6 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI6 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.61 C373210586
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI7
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-57
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI7 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI7 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.62 C373210587
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI8
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-58
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI8 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI8 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.63 C373210588
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1FailQCI9
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-59
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI9 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.64 C373210589
Counter Name
Number of Initial E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabInitFailNbr.S1Fail
Counter Description
One or more E-RAB setup requests may be contained in an InitialContextSetupRequest
message from the MME. After the eNodeB receives and processes the message, it
answers the MME with an InitialContextSetupResponse message. The successful
E-RABs are indicated in an E-RAB Setup List IE, and the failed E-RABs are indicated in
an E-RAB Failed to Setup List IE.
2-60
Triggering Point
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
QCI9 E-RABs, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the eNodeB sends the MME an InitialContextSetupResponse message due to
unavailable transmission, and the E-RAB Failed to Setup List IE in the message indicates
E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.65 C373505375
Counter Name
Number of Initial QCI1 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI1.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI1
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI1 E-RAB is included.
Refer to Sampling Point 8.
2-61
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.66 C373505376
Counter Name
Number of Initial QCI2 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI2.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI2
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI2 E-RAB is included.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
2-62
Sampling Period
Event triggered
Unit
unit
2.1.3.67 C373505377
Counter Name
Number of Initial QCI3 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI3.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup,the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI3
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI3 E-RAB is included.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-63
2.1.3.68 C373505378
Counter Name
Number of Initial QCI4 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI4.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI4
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI4 E-RAB is included.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.69 C373505379
Counter Name
Number of Initial QCI5 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI5.RRCReestablishment
2-64
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI5
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI5 E-RAB is included.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.70 C373505380
Counter Name
Number of Initial QCI6 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI6.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI6
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI6 E-RAB is included.
2-65
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.71 C373505381
Counter Name
Number of Initial QCI7 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI7.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI7
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI7 E-RAB is included.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
2-66
Sampling Period
Event triggered
Unit
unit
2.1.3.72 C373505382
Counter Name
Number of Initial QCI8 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI8.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI8
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI8 E-RAB is included.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-67
2.1.3.73 C373505383
Counter Name
Number of Initial QCI9 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabInitFailNbr.QCI9.RRCReestablishment
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each QCI9
E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment in which the QCI9 E-RAB is included.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.74 C373505430
Counter Name
Number of Initial QCI1 E-RAB Setup Attempt
Short Name
-
2-68
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI1 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI1 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.75 C373505431
Counter Name
Number of Initial QCI2 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI2 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI2 E-RAB.
2-69
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.76 C373505432
Counter Name
Number of Initial QCI3 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI3 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI3 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI3 E-RAB.
Counter Type
Accumulated value
2-70
Sampling Period
Event triggered
Unit
unit
2.1.3.77 C373505433
Counter Name
Number of Initial QCI4 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI4 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI4 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-71
2.1.3.78 C373505434
Counter Name
Number of Initial QCI5 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI5 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI5 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.79 C373505435
Counter Name
Number of Initial QCI6 E-RAB Setup Attempt
Short Name
-
2-72
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI6 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI6 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.80 C373505436
Counter Name
Number of Initial QCI7 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI7 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI7 E-RAB.
2-73
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.81 C373505437
Counter Name
Number of Initial QCI8 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI8 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI8 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI8 E-RAB.
Counter Type
Accumulated value
2-74
Sampling Period
Event triggered
Unit
unit
2.1.3.82 C373505438
Counter Name
Number of Initial QCI9 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested QCI9 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME in which IE:E-RAB to Be Setup List includes QCI9 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when the eNodeB receives the
INITIAL CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be
Setup List includes QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-75
2.1.3.83 C373505472
Counter Name
Number of Initial E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an INITIAL CONTEXT SETUP REQUEST message, each
requested E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the INITIAL CONTEXT SETUP REQUEST message from the
MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB receives the INITIAL
CONTEXT SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup
List includes E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.84 C373505473
Counter Name
Number of Initial E-RAB Successful Setup
Short Name
ERAB.EstabInitSuccNbr
2-76
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE message,
in which each E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse to the MME.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup List IE includes the
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.85 C373505474
Counter Name
Number of Initial E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabInitFailNbr.AdFail
Counter Description
On transmission by the eNodeB of an INITIAL CONTEXT SETUP RESPONSE, or INITIAL
CONTEXT SETUP FAILURE message for admission failures, in which each E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB occurs E-RAB admission failures then replies the
InitialContextSetupResponse or InitialContextSetupFailure message to MME.
2-77
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB occurs E-RAB admission
failures then sends the InitialContextSetupResponse or InitialContextSetupFailure
message to MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.86 C373505475
Counter Name
Number of Initial E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabInitFailNbr.UuFail
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message
not received by the eNodeB,the eNodeB sends an INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupFailure message to MME due to timeout
of waiting for the RRCConnectionReconfigurationComplete message.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message.
Counter Type
Accumulated value
2-78
Sampling Period
Event triggered
Unit
unit
2.1.3.87 C373505476
Counter Name
Number of Initial E-RAB Setup Failures due to Security Failure
Short Name
ERAB.EstabInitFail.ContextFail
Counter Description
When the eNodeB receives the SecurityModefailures from the UE, then sends a INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB E-RAB failed to setup due to security mode failures,eNodeB replies the
InitialContextSetupFailure message to MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to security mode failures ,and the E-RAB
Setup List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-79
2.1.3.88 C373505477
Counter Name
Number of Initial E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabInitFailNbr.ParaErr
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for parameter error, in which each E-RAB failed to establish is added to the
counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse or InitialContextSetupFailure
message to MME due to parameter error.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupResponse or InitialContextSetupFailure message to MME due to
parameter error.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.89 C373505478
Counter Name
Number of Initial E-RAB Setup Failures due to Receiving RRC Re-establishment Request
Short Name
ERAB.EstabInitFailNbr.RRCReestablishment
2-80
Counter Description
For receiving the RRCConnection ReestablishmentRequest message during UE Context
setup, the eNodeB sends an INITIAL CONTEXT SETUP FAILURE message, each E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB sends the InitialContextSetupfailure message to the MME due to
eNodeB RRC re-establishment.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
InitialContextSetupfailure message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.1.3.90 C373505479
Counter Name
Number of Initial E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabInitFailNbr.Other
Counter Description
When the eNodeB receives the InitialContextSetupRequest from the MME, then replies
an INITIAL CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message for other reason, in which each E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the InitialContextSetupResponse or InitialContextSetupFailure
message to MME due to other reason.
Refer to Sampling Point 4.
2-81
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupResponse or InitialContextSetupFailure message to MME due to other
reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
l Sampling Point 1: The EUTRAN receives the E-RAB SETUP REQUEST message
from the MME.
l Sampling Point 2: The EUTRAN sends the RRC CONNECTION
RECONFIGURATION message to the UE.
2-82
2 C373210255 Number of Additional QCI1 E-RAB Setup Failures due to ENB Admission
Failure
3 C373210256 Number of Additional QCI1 E-RAB Setup Failures due to Uu interface Failure
4 C373210257 Number of Additional QCI1 E-RAB Setup Failures due to Handover Trigger
5 C373210258 Number of Additional QCI1 E-RAB Setup Failures due to Parameter Error
6 C373210259 Number of Additional QCI1 E-RAB Setup Failures due to Other Reason
8 C373210261 Number of Additional QCI2 E-RAB Setup Failures due to ENB Admission
Failure
9 C373210262 Number of Additional QCI2 E-RAB Setup Failures due to Uu interface Failure
10 C373210263 Number of Additional QCI2 E-RAB Setup Failures due to Handover Trigger
11 C373210264 Number of Additional QCI2 E-RAB Setup Failures due to Parameter Error
12 C373210265 Number of Additional QCI2 E-RAB Setup Failures due to Other Reason
14 C373210267 Number of Additional QCI3 E-RAB Setup Failures due to ENB Admission
Failure
15 C373210268 Number of Additional QCI3 E-RAB Setup Failures due to Uu interface Failure
16 C373210269 Number of Additional QCI3 E-RAB Setup Failures due to Handover Trigger
17 C373210270 Number of Additional QCI3 E-RAB Setup Failures due to Parameter Error
18 C373210271 Number of Additional QCI3 E-RAB Setup Failures due to Other Reason
20 C373210273 Number of Additional QCI4 E-RAB Setup Failures due to ENB Admission
Failure
2-83
21 C373210274 Number of Additional QCI4 E-RAB Setup Failures due to Uu interface Failure
22 C373210275 Number of Additional QCI4 E-RAB Setup Failures due to Handover Trigger
23 C373210276 Number of Additional QCI4 E-RAB Setup Failures due to Parameter Error
24 C373210277 Number of Additional QCI4 E-RAB Setup Failures due to Other Reason
26 C373210279 Number of Additional QCI5 E-RAB Setup Failures due to ENB Admission
Failure
27 C373210280 Number of Additional QCI5 E-RAB Setup Failures due to Uu interface Failure
28 C373210281 Number of Additional QCI5 E-RAB Setup Failures due to Handover Trigger
29 C373210282 Number of Additional QCI5 E-RAB Setup Failures due to Parameter Error
30 C373210283 Number of Additional QCI5 E-RAB Setup Failures due to Other Reason
32 C373210285 Number of Additional QCI6 E-RAB Setup Failures due to ENB Admission
Failure
33 C373210286 Number of Additional QCI6 E-RAB Setup Failures due to Uu interface Failure
34 C373210287 Number of Additional QCI6 E-RAB Setup Failures due to Handover Trigger
35 C373210288 Number of Additional QCI6 E-RAB Setup Failures due to Parameter Error
36 C373210289 Number of Additional QCI6 E-RAB Setup Failures due to Other Reason
38 C373210291 Number of Additional QCI7 E-RAB Setup Failures due to ENB Admission
Failure
39 C373210292 Number of Additional QCI7 E-RAB Setup Failures due to Uu interface Failure
40 C373210293 Number of Additional QCI7 E-RAB Setup Failures due to Handover Trigger
41 C373210294 Number of Additional QCI7 E-RAB Setup Failures due to Parameter Error
42 C373210295 Number of Additional QCI7 E-RAB Setup Failures due to Other Reason
44 C373210297 Number of Additional QCI8 E-RAB Setup Failures due to ENB Admission
Failure
45 C373210298 Number of Additional QCI8 E-RAB Setup Failures due to Uu interface Failure
46 C373210299 Number of Additional QCI8 E-RAB Setup Failures due to Handover Trigger
47 C373210300 Number of Additional QCI8 E-RAB Setup Failures due to Parameter Error
48 C373210301 Number of Additional QCI8 E-RAB Setup Failures due to Other Reason
2-84
50 C373210303 Number of Additional QCI9 E-RAB Setup Failures due to ENB Admission
Failure
51 C373210304 Number of Additional QCI9 E-RAB Setup Failures due to Uu interface Failure
52 C373210305 Number of Additional QCI9 E-RAB Setup Failures due to Handover Trigger
53 C373210306 Number of Additional QCI9 E-RAB Setup Failures due to Parameter Error
54 C373210307 Number of Additional QCI9 E-RAB Setup Failures due to Other Reason
55 C373210590 Number of Additional QCI1 E-RAB Setup Failures due to Transport Cause
56 C373210591 Number of Additional QCI2 E-RAB Setup Failures due to Transport Cause
57 C373210592 Number of Additional QCI3 E-RAB Setup Failures due to Transport Cause
58 C373210593 Number of Additional QCI4 E-RAB Setup Failures due to Transport Cause
59 C373210594 Number of Additional QCI5 E-RAB Setup Failures due to Transport Cause
60 C373210595 Number of Additional QCI6 E-RAB Setup Failures due to Transport Cause
61 C373210596 Number of Additional QCI7 E-RAB Setup Failures due to Transport Cause
62 C373210597 Number of Additional QCI8 E-RAB Setup Failures due to Transport Cause
63 C373210598 Number of Additional QCI9 E-RAB Setup Failures due to Transport Cause
65 C373505384 Number of Additional QCI1 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
66 C373505385 Number of Additional QCI2 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
67 C373505386 Number of Additional QCI3 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
68 C373505387 Number of Additional QCI4 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
69 C373505388 Number of Additional QCI5 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
70 C373505389 Number of Additional QCI6 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
71 C373505390 Number of Additional QCI7 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
72 C373505391 Number of Additional QCI8 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
73 C373505392 Number of Additional QCI9 E-RAB Setup Failures due to Receiving RRC
Re-establishment Request
2-85
85 C373505482 Number of Additional E-RAB Setup Failures due to ENB Admission Failure
Counter Name
Number of Additional QCI1 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI1
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI1 E-RAB successfully established is added to the counter.
2-86
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.2 C373210255
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI1
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI1 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI1 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI1 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB occurs QCI1 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI1 E-RAB.
2-87
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.3 C373210256
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI1
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI1 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI1 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-88
Unit
unit
2.2.3.4 C373210257
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI1
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI1 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the QCI1 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger ,and the E-RAB Failed to Setup
List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.5 C373210258
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to Parameter Error
2-89
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI1
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI1 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI1 E-RAB.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.6 C373210259
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI1
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI1 E-RAB failed
to establish is added to the counter.
2-90
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI1 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.7 C373210260
Counter Name
Number of Additional QCI2 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI2
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI2 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI2 E-RAB.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI2 E-RAB.
2-91
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.8 C373210261
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI2
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI2 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI2 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI2 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB occurs QCI2 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-92
2.2.3.9 C373210262
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI2
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI2 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.10 C373210263
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to Handover Trigger
2-93
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI2
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI2 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger ,and the E-RAB Failed to Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger ,and the E-RAB Failed to Setup
List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.11 C373210264
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI2
Counter Description
When the eNodeB receives the E-RABContextSetupRequest from the MME, then replies
an E-RAB SETUP RESPONSE message for parameter error, in which each QCI2 E-RAB
failed to establish is added to the counter.
2-94
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.12 C373210265
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI2
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI2 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI2 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
2-95
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.13 C373210266
Counter Name
Number of Additional QCI3 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI3
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI3 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI3 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-96
Unit
unit
2.2.3.14 C373210267
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI3
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI3 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI3 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI3 E-RAB.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB occurs QCI3 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.15 C373210268
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to Uu interface Failure
2-97
Short Name
ERAB.EstabAddFailNbr.UuFailQCI3
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI3 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI3 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.16 C373210269
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI3
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI3 E-RAB failed to establish is added to the counter.
2-98
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger ,and the E-RAB Failed to Setup List includes the QCI3 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger ,and the E-RAB Failed to Setup
List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.17 C373210270
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI3
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI3 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI3 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
2-99
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.18 C373210271
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI3
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI3 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI3 E-RAB.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI3 E-RAB.
Counter Type
Accumulated value
2-100
Sampling Period
Event triggered
Unit
unit
2.2.3.19 C373210272
Counter Name
Number of Additional QCI4 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI4
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI4 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.20 C373210273
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to ENB Admission Failure
2-101
Short Name
ERAB.EstabAddFailNbr.AdFailQCI4
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI4 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI4 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI4 E-RAB.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB occurs QCI4 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.21 C373210274
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI4
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI4 E-RAB failed to establish is added to the counter.
2-102
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI4 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.22 C373210275
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI4
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI4 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger ,and the E-RAB Failed to Setup List includes the QCI4 E-RAB.
Refer to Sampling Point 6.
2-103
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger ,and the E-RAB Failed to Setup
List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.23 C373210276
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI4
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI4 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI4 E-RAB.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI4 E-RAB.
Counter Type
Accumulated value
2-104
Sampling Period
Event triggered
Unit
unit
2.2.3.24 C373210277
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI4
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI4 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI4 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-105
2.2.3.25 C373210278
Counter Name
Number of Additional QCI5 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI5
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI5 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.26 C373210279
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI5
2-106
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI5 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI5 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI5 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB occurs QCI5 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.27 C373210280
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI5
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI5 E-RAB failed to establish is added to the counter.
2-107
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI5 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.28 C373210281
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI5
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI5 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the QCI5 E-RAB.
Refer to Sampling Point 6.
2-108
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger,and the E-RAB Failed to Setup
List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.29 C373210282
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI5
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI5 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI5 E-RAB.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI5 E-RAB.
Counter Type
Accumulated value
2-109
Sampling Period
Event triggered
Unit
unit
2.2.3.30 C373210283
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI5
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI5 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI5 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-110
2.2.3.31 C373210284
Counter Name
Number of Additional QCI6 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI6
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI6 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI6 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.32 C373210285
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI6
2-111
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI6 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI6 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI6 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB occurs QCI6 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.33 C373210286
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI6
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI6 E-RAB failed to establish is added to the counter.
2-112
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI6 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.34 C373210287
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI6
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI6 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the QCI6 E-RAB.
Refer to Sampling Point 6.
2-113
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger,and the E-RAB Failed to Setup
List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.35 C373210288
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI6
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI6 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI6 E-RAB.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI6 E-RAB.
Counter Type
Accumulated value
2-114
Sampling Period
Event triggered
Unit
unit
2.2.3.36 C373210289
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI6
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI6 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI6 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-115
2.2.3.37 C373210290
Counter Name
Number of Additional QCI7 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI7
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI7 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB to Setup
List includes QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.38 C373210291
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI7
2-116
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI7 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI7 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI7 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB occurs QCI7 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.39 C373210292
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI7
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI7 E-RAB failed to establish is added to the counter.
2-117
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI7 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.40 C373210293
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI7
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI7 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the QCI7 E-RAB.
Refer to Sampling Point 6.
2-118
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger,and the E-RAB Failed to Setup
List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.41 C373210294
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI7
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI7 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI7 E-RAB.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
2-119
Sampling Period
Event triggered
Unit
unit
2.2.3.42 C373210295
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI7
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI7 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI7 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-120
2.2.3.43 C373210296
Counter Name
Number of Additional QCI8 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI8
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI8 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.44 C373210297
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI8
2-121
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI8 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI8 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI8 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB occurs QCI8 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.45 C373210298
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI8
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI8 E-RAB failed to establish is added to the counter.
2-122
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI8 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.46 C373210299
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI8
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI8 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the QCI8 E-RAB.
Refer to Sampling Point 6.
2-123
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger,and the E-RAB Failed to Setup
List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.47 C373210300
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI8
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI8 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI8 E-RAB.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI8 E-RAB.
Counter Type
Accumulated value
2-124
Sampling Period
Event triggered
Unit
unit
2.2.3.48 C373210301
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI8
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI8 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI8 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-125
2.2.3.49 C373210302
Counter Name
Number of Additional QCI9 E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr.QCI9
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each QCI9 E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes QCI9 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.50 C373210303
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFailQCI9
2-126
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each QCI9 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs QCI9 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the QCI9 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB occurs QCI9 E-RAB
admission failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed
to Setup List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.51 C373210304
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFailQCI9
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each QCI9 E-RAB failed to establish is added to the counter.
2-127
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the QCI9 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup List
includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.52 C373210305
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrigQCI9
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each QCI9 E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the QCI9 E-RAB.
Refer to Sampling Point 6.
2-128
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger,and the E-RAB Failed to Setup
List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.53 C373210306
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErrQCI9
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each QCI9 E-RAB
failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the QCI9 E-RAB.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the QCI9 E-RAB.
Counter Type
Accumulated value
2-129
Sampling Period
Event triggered
Unit
unit
2.2.3.54 C373210307
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.OtherQCI9
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each QCI9 E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the QCI9 E-RAB.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-130
2.2.3.55 C373210590
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI1
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI1 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI1
E-RABs, this counter is updated.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI1
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI1 E-RABs, each QCI1 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.56 C373210591
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to Transport Cause
2-131
Short Name
ERAB.EstabAddFailNbr.S1FailQCI2
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI2 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI2
E-RABs, this counter is updated.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI2
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI2 E-RABs, each QCI2 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.57 C373210592
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI3
2-132
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI3 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI3
E-RABs, this counter is updated.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI3
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI3 E-RABs, each QCI3 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.58 C373210593
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI4
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
2-133
List IE. This counter counts the number of QCI4 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI4
E-RABs, this counter is updated.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI4
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI4 E-RABs, each QCI4 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.59 C373210594
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI5
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI5 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
2-134
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI5
E-RABs, this counter is updated.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI5
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI5 E-RABs, each QCI5 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.60 C373210595
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI6
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI6 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI6
E-RABs, this counter is updated.
2-135
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI6
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI6 E-RABs, each QCI6 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.61 C373210596
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI7
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI7 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI7
E-RABs, this counter is updated.
2-136
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI7
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI7 E-RABs, each QCI7 E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.62 C373210597
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI8
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI8 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI8
E-RABs, this counter is updated.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI8
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI8 E-RABs, each QCI8 E-RAB counter is incremented by one.
2-137
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.63 C373210598
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1FailQCI9
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup
List IE. This counter counts the number of QCI9 E-RABs contained in the E-RAB Failed to
Setup List IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates QCI9
E-RABs, this counter is updated.
Refer to Sampling Point 4, Sampling Point 6.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to QCI9
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
QCI9 E-RABs, each QCI9 E-RAB counter is incremented by one.
Counter Type
Accumulated value
2-138
Sampling Period
Event triggered
Unit
unit
2.2.3.64 C373210599
Counter Name
Number of Additional E-RAB Setup Failures due to Transport Cause
Short Name
ERAB.EstabAddFailNbr.S1Fail
Counter Description
One or more E-RAB setup requests may be contained in an E-RABSetupRequest message
from the MME. After the eNodeB receives and processes the message, it answers the
MME with an E-RABSetupRespons message. The successful E-RABs are indicated in an
E-RAB Setup List IE, and the failed E-RABs are indicated in an E-RAB Failed to Setup List
IE. This counter counts the number of E-RABs contained in the E-RAB Failed to Setup List
IE due to unavailable transmission.
Triggering Point
When the eNodeB sends the MME an E-RABSetupResponse message due to unavailable
transmission, and the E-RAB Failed to Setup List IE in the message indicates E-RABs, this
counter is updated.
Update Description
When the eNodeB answers the MME with an E-RABSetupResponse message due to
E-RAB admission failure and the E-RAB Failed to Setup List IE in the message indicates
E-RABs, each E-RAB counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-139
Unit
unit
2.2.3.65 C373505384
Counter Name
Number of Additional QCI1 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI1.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI1 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI1 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-140
2.2.3.66 C373505385
Counter Name
Number of Additional QCI2 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI2.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI2 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI2 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the E-
RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.67 C373505386
Counter Name
Number of Additional QCI3 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
2-141
Short Name
ERAB.EstabAddFailNbr.QCI3.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI3 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI3 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.68 C373505387
Counter Name
Number of Additional QCI4 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI4.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI4 E-RAB failed to establish is added
to the counter.
2-142
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI4 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.69 C373505388
Counter Name
Number of Additional QCI5 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI5.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI5 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI5 E-RAB.
Refer to Sampling Point 6.
2-143
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.70 C373505389
Counter Name
Number of Additional QCI6 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI6.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI6 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI6 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI6 E-RAB.
Counter Type
Accumulated value
2-144
Sampling Period
Event triggered
Unit
unit
2.2.3.71 C373505390
Counter Name
Number of Additional QCI7 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI7.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI7 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI7 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-145
2.2.3.72 C373505391
Counter Name
Number of Additional QCI8 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.QCI8.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI8 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI8 E-RAB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.73 C373505392
Counter Name
Number of Additional QCI9 E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
2-146
Short Name
ERAB.EstabAddFailNbr.QCI9.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each QCI9 E-RAB failed to establish is added
to the counter.
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI9 E-RAB.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.74 C373505439
Counter Name
Number of Additional QCI1 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI1 E-RAB in the message is added to the counter.
2-147
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI1 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.75 C373505440
Counter Name
Number of Additional QCI2 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI2 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI2 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI2 E-RAB.
2-148
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.76 C373505441
Counter Name
Number of Additional QCI3 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI3 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI3 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-149
2.2.3.77 C373505442
Counter Name
Number of Additional QCI4 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI4 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI4 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.78 C373505443
Counter Name
Number of Additional QCI5 E-RAB Setup Attempt
Short Name
-
2-150
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI5 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI5 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.79 C373505444
Counter Name
Number of Additional QCI6 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI6 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI6 E-RAB.
2-151
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.80 C373505445
Counter Name
Number of Additional QCI7 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI7 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI7 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI7 E-RAB.
Counter Type
Accumulated value
2-152
Sampling Period
Event triggered
Unit
unit
2.2.3.81 C373505446
Counter Name
Number of Additional QCI8 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI8 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI8 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-153
2.2.3.82 C373505447
Counter Name
Number of Additional QCI9 E-RAB Setup Attempt
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
QCI9 E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME in
which IE:E-RAB to Be Setup List includes QCI9 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when the eNodeB receives the
E-RAB SETUP REQUEST message from the MME in which IE:E-RAB to Be Setup List
includes QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.83 C373505480
Counter Name
Number of Additional E-RAB Setup Attempt
Short Name
-
2-154
Counter Description
On receipt by the eNodeB of an E-RAB SETUP REQUEST message, each requested
E-RAB in the message is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB SETUP REQUEST message from the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB receives the E-RAB
SETUP REQUEST message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.84 C373505481
Counter Name
Number of Additional E-RAB Successful Setup
Short Name
ERAB.EstabAddSuccNbr
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message, in which
each E-RAB successfully established is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the E-RAB Setup
List IE includes E-RAB.
2-155
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABSetupResponse to MME and the E-RAB Setup List IE includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.85 C373505482
Counter Name
Number of Additional E-RAB Setup Failures due to ENB Admission Failure
Short Name
ERAB.EstabAddFailNbr.AdFail
Counter Description
On transmission by the eNodeB of an E-RAB SETUP RESPONSE message for admission
failures, in which each E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB occurs E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to Setup List
includes the E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB occurs E-RAB admission
failures then sends E-RABSetupResponse to MME, in which the E-RAB Failed to Setup
List includes the E-RAB.
Counter Type
Accumulated value
2-156
Sampling Period
Event triggered
Unit
unit
2.2.3.86 C373505483
Counter Name
Number of Additional E-RAB Setup Failures due to Uu interface Failure
Short Name
ERAB.EstabAddFailNbr.UuFail
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB SETUP RESPONSE message to
the MME, in which each E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB Failed
to Setup List includes the E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB
sends E-RABSetupResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Setup
List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-157
2.2.3.87 C373505484
Counter Name
Number of Additional E-RAB Setup Failures due to Handover Trigger
Short Name
ERAB.EstabAddFailNbr.HoTrig
Counter Description
For handover, then sends a E-RAB SETUP RESPONSE message to the MME, in which
each E-RAB failed to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to handover
trigger,and the E-RAB Failed to Setup List includes the E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABSetupResponse to MME due to handover trigger ,and the E-RAB Failed to Setup
List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.88 C373505485
Counter Name
Number of Additional E-RAB Setup Failures due to Parameter Error
Short Name
ERAB.EstabAddFailNbr.ParaErr
2-158
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for parameter error, in which each E-RAB failed
to establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to message
parameter error ,and the E-RAB Failed to Setup List includes the E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABSetupResponse to MME due to message parameter error,and the E-RAB Failed
to Setup List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.89 C373505486
Counter Name
Number of Additional E-RAB Setup Failures due to Receiving RRC Re-establishment
Request
Short Name
ERAB.EstabAddFailNbr.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
an E-RAB SETUP RESPONSE message, each E-RAB failed to establish is added to the
counter.
2-159
Triggering Point
When the eNodeB sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB When the eNodeB sends the
E-RABSetupResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Setup List includes E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.2.3.90 C373505487
Counter Name
Number of Additional E-RAB Setup Failures due to Other Reason
Short Name
ERAB.EstabAddFailNbr.Other
Counter Description
When the eNodeB receives the E-RABSetupRequest from the MME, then replies an
E-RAB SETUP RESPONSE message for other reason, in which each E-RAB failed to
establish is added to the counter.
Triggering Point
When the eNodeB replies the E-RABSetupResponse message to MME due to other
reason,and the E-RAB Failed to Setup List includes the E-RAB.
Refer to Sampling Point 4.
2-160
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABSetupResponse to MME due to other reason,and the E-RAB Failed to Setup List
includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
l Sampling Point 1: The EUTRAN receives the E-RAB MODIFY REQUEST message
from the MME.
l Sampling Point 2: The EUTRAN sends the RRC CONNECTION
RECONFIGURATION message to the UE.
l Sampling Point 3: The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
2-161
l Sampling Point 4: The EUTRAN sends the E-RAB MODIFY RESPONSE message to
the MME, indicating that the E-RAB Modification has been successful or failed.
l Sampling Point 5: The EUTRAN waits for the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE until the timer is timeout,
then the EUTRAN sends the E-RAB MODIFY RESPONSE message to the
MME,indicating that the E-RAB Modification has failed.
2 C373210309 Number of QCI1 E-RAB Modification Failure due to ENB Admission Failure
8 C373210315 Number of QCI2 E-RAB Modification Failure due to ENB Admission Failure
14 C373210321 Number of QCI3 E-RAB Modification Failure due to ENB Admission Failure
20 C373210327 Number of QCI4 E-RAB Modification Failure due to ENB Admission Failure
2-162
26 C373210333 Number of QCI5 E-RAB Modification Failure due to ENB Admission Failure
32 C373210339 Number of QCI6 E-RAB Modification Failure due to ENB Access Failure
38 C373210345 Number of QCI7 E-RAB Modification Failure due to ENB Admission Failure
44 C373210351 Number of QCI8 E-RAB Modification Failure due to ENB Admission Failure
50 C373210357 Number of QCI9 E-RAB Modification Failure due to ENB Admission Failure
2-163
2-164
Counter Name
Number of QCI1 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI1
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI1 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.2 C373210309
Counter Name
Number of QCI1 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI1
2-165
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI1 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI1 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB occurs QCI1 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.3 C373210310
Counter Name
Number of QCI1 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI1
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI1 E-RAB failed to modify the QoS parameter is added to the
counter.
2-166
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI1 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.4 C373210311
Counter Name
Number of QCI1 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI1
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI1 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI1 E-RAB.
Refer to Sampling Point 4.
2-167
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.5 C373210312
Counter Name
Number of QCI1 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI1
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI1 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI1 E-RAB.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI1 E-RAB.
Counter Type
Accumulated value
2-168
Sampling Period
Event triggered
Unit
unit
2.3.3.6 C373210313
Counter Name
Number of QCI1 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI1
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI1
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI1 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-169
2.3.3.7 C373210314
Counter Name
Number of QCI2 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI2
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI2 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI2 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.8 C373210315
Counter Name
Number of QCI2 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI2
2-170
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI2 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI2 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI2 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB occurs QCI2 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.9 C373210316
Counter Name
Number of QCI2 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI2
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI2 E-RAB failed to modify the QoS parameter is added to the
counter.
2-171
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI2 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.10 C373210317
Counter Name
Number of QCI2 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI2
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI2 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI2 E-RAB.
Refer to Sampling Point 4.
2-172
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.11 C373210318
Counter Name
Number of QCI2 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI2
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI2 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI2 E-RAB.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI2 E-RAB.
Counter Type
Accumulated value
2-173
Sampling Period
Event triggered
Unit
unit
2.3.3.12 C373210319
Counter Name
Number of QCI2 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI2
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI2
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI2 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-174
2.3.3.13 C373210320
Counter Name
Number of QCI3 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI3
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI3 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI3 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.14 C373210321
Counter Name
Number of QCI3 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI3
2-175
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI3 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI3 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI3 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB occurs QCI3 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.15 C373210322
Counter Name
Number of QCI3 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI3
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI3 E-RAB failed to modify the QoS parameter is added to the
counter.
2-176
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI3 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.16 C373210323
Counter Name
Number of QCI3 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI3
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI3 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI3 E-RAB.
Refer to Sampling Point 4.
2-177
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.17 C373210324
Counter Name
Number of QCI3 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI3
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI3 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI3 E-RAB.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI3 E-RAB.
Counter Type
Accumulated value
2-178
Sampling Period
Event triggered
Unit
unit
2.3.3.18 C373210325
Counter Name
Number of QCI3 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI3
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI3
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI3 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-179
2.3.3.19 C373210326
Counter Name
Number of QCI4 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI4
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI4 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.20 C373210327
Counter Name
Number of QCI4 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI4
2-180
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI4 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI4 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB occurs QCI4 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.21 C373210328
Counter Name
Number of QCI4 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI4
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI4 E-RAB failed to modify the QoS parameter is added to the
counter.
2-181
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI4 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.22 C373210329
Counter Name
Number of QCI4 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI4
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI4 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI4 E-RAB.
Refer to Sampling Point 4.
2-182
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.23 C373210330
Counter Name
Number of QCI4 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI4
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI4 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI4 E-RAB.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI4 E-RAB.
Counter Type
Accumulated value
2-183
Sampling Period
Event triggered
Unit
unit
2.3.3.24 C373210331
Counter Name
Number of QCI4 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI4
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI4
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI4 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-184
2.3.3.25 C373210332
Counter Name
Number of QCI5 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI5
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI5 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to the MME, and the
E-RAB Modify List IE includes QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends the
E-RABModifyResponse message to MME and the E-RAB Modify List IE includes the
QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.26 C373210333
Counter Name
Number of QCI5 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI5
2-185
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI5 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI5 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB occurs QCI5 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.27 C373210334
Counter Name
Number of QCI5 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI5
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI5 E-RAB failed to modify the QoS parameter is added to the
counter.
2-186
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI5 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.28 C373210335
Counter Name
Number of QCI5 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI5
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI5 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI5 E-RAB.
Refer to Sampling Point 4.
2-187
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.29 C373210336
Counter Name
Number of QCI5 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI5
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI5 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI5 E-RAB.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI5 E-RAB.
Counter Type
Accumulated value
2-188
Sampling Period
Event triggered
Unit
unit
2.3.3.30 C373210337
Counter Name
Number of QCI5 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI5
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI5
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI5 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-189
2.3.3.31 C373210338
Counter Name
Number of QCI6 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI6
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI6 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI6 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.32 C373210339
Counter Name
Number of QCI6 E-RAB Modification Failure due to ENB Access Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI6
2-190
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI6 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI6 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI6 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB occurs QCI6 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.33 C373210340
Counter Name
Number of QCI6 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI6
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI6 E-RAB failed to modify the QoS parameter is added to the
counter.
2-191
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to waiting
RRCConnectionReconfigurationComplete timer timeout,and the E-RAB failed to Modify
List includes the QCI6 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.34 C373210341
Counter Name
Number of QCI6 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI6
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI6 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI6 E-RAB.
Refer to Sampling Point 4.
2-192
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.35 C373210342
Counter Name
Number of QCI6 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI6
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI6 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI6 E-RAB.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI6 E-RAB.
Counter Type
Accumulated value
2-193
Sampling Period
Event triggered
Unit
unit
2.3.3.36 C373210343
Counter Name
Number of QCI6 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI6
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI6
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI6 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-194
2.3.3.37 C373210344
Counter Name
Number of QCI7 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI7
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI7 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB to Setup
List includes QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB to Setup List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.38 C373210345
Counter Name
Number of QCI7 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI7
2-195
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI7 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI7 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB occurs QCI7 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.39 C373210346
Counter Name
Number of QCI7 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI7
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI7 E-RAB failed to modify the QoS parameter is added to the
counter.
2-196
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI7 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.40 C373210347
Counter Name
Number of QCI7 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI7
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI7 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI7 E-RAB.
Refer to Sampling Point 4.
2-197
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.41 C373210348
Counter Name
Number of QCI7 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI7
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI7 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI7 E-RAB.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI7 E-RAB.
Counter Type
Accumulated value
2-198
Sampling Period
Event triggered
Unit
unit
2.3.3.42 C373210349
Counter Name
Number of QCI7 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI7
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI7
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI7 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-199
2.3.3.43 C373210350
Counter Name
Number of QCI8 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI8
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI8 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.44 C373210351
Counter Name
Number of QCI8 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI8
2-200
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI8 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI8 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB occurs QCI8 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.45 C373210352
Counter Name
Number of QCI8 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI8
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI8 E-RAB failed to modify the QoS parameter is added to the
counter.
2-201
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI8 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.46 C373210353
Counter Name
Number of QCI8 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI8
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI8 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI8 E-RAB.
Refer to Sampling Point 4.
2-202
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.47 C373210354
Counter Name
Number of QCI8 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI8
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI8 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI8 E-RAB.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI8 E-RAB.
Counter Type
Accumulated value
2-203
Sampling Period
Event triggered
Unit
unit
2.3.3.48 C373210355
Counter Name
Number of QCI8 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI8
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI8
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI8 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify List
includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-204
2.3.3.49 C373210356
Counter Name
Number of QCI9 E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr.QCI9
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each QCI9 E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes QCI9 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.50 C373210357
Counter Name
Number of QCI9 E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFailQCI9
2-205
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each QCI9 E-RAB failed to modify the QoS parameter is
added to the counter.
Triggering Point
When the eNodeB occurs QCI9 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the QCI9 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB occurs QCI9 E-RAB
admission failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed
to Modify List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.51 C373210358
Counter Name
Number of QCI9 E-RAB Modification Failure due to Uu interface Failure
Short Name
ERAB.ModQoSFailNbr.UuFailQCI9
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each QCI9 E-RAB failed to modify the QoS parameter is added to the
counter.
2-206
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the QCI9 E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and the E-RAB Failed to Modify List
includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.52 C373210359
Counter Name
Number of QCI9 E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrigQCI9
Counter Description
For handover, then sends a E-RAB MODIFY RESPONSE message to the MME, in which
each QCI9 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the QCI9 E-RAB.
Refer to Sampling Point 4.
2-207
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to Modify
List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.53 C373210360
Counter Name
Number of QCI9 E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErrQCI9
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
QCI9 E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the QCI9 E-RAB.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the QCI9 E-RAB.
Counter Type
Accumulated value
2-208
Sampling Period
Event triggered
Unit
unit
2.3.3.54 C373210361
Counter Name
Number of QCI9 E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.OtherQCI9
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each QCI9
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the QCI9 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when eNodeB sends
E-RABModifyResponse message to MME due to other reason,and the E-RAB Failed to
Modify List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-209
2.3.3.55 C373505393
Counter Name
Number of QCI1 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI1.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI1 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI1 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.56 C373505394
Counter Name
Number of QCI2 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
2-210
Short Name
ERAB.ModQoSFailNbr.QCI2.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI2 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI2 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.57 C373505395
Counter Name
Number of QCI3 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI3.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI3 E-RAB failed to an modify
the QoS parameter message is added to the counter.
2-211
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI3 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.58 C373505396
Counter Name
Number of QCI4 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI4.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI4 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI4 E-RABs.
Refer to Sampling Point 4.
2-212
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.59 C373505397
Counter Name
Number of QCI5 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI5.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI5 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI5 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI5 E-RAB.
Counter Type
Accumulated value
2-213
Sampling Period
Event triggered
Unit
unit
2.3.3.60 C373505398
Counter Name
Number of QCI6 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI6.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI6 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI6 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-214
2.3.3.61 C373505399
Counter Name
Number of QCI7 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI7.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI7 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI7 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.62 C373505400
Counter Name
Number of QCI8 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
2-215
Short Name
ERAB.ModQoSFailNbr.QCI8.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI8 E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI8 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.63 C373505401
Counter Name
Number of QCI9 E-RAB Modification Failure due to Receiving RRC Re-establishment
Request
Short Name
ERAB.ModQoSFailNbr.QCI9.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
E-RAB MODIFY RESPONSE message to the MME.each QCI9 E-RAB failed to an modify
the QoS parameter message is added to the counter.
2-216
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI9 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment in which IE
E-RAB Failed to Modify List includes QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.64 C373505412
Counter Name
Number of QCI1 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI1 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI1 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI1 E-RAB.
2-217
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.65 C373505413
Counter Name
Number of QCI2 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI2 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI2 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-218
2.3.3.66 C373505414
Counter Name
Number of QCI3 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI3 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI3 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.67 C373505415
Counter Name
Number of QCI4 E-RAB Modification Request
Short Name
-
2-219
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI4 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI4 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.68 C373505416
Counter Name
Number of QCI5 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI5 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI5 E-RAB.
2-220
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.69 C373505417
Counter Name
Number of QCI6 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI6 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI6 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI6 E-RAB.
Counter Type
Accumulated value
2-221
Sampling Period
Event triggered
Unit
unit
2.3.3.70 C373505418
Counter Name
Number of QCI7 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI7 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI7 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-222
2.3.3.71 C373505419
Counter Name
Number of QCI8 E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI8 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI8 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.72 C373505420
Counter Name
Number of QCI9 E-RAB Modification Request
Short Name
-
2-223
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each QCI9 E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs QCI9 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.73 C373505488
Counter Name
Number of E-RAB Modification Request
Short Name
-
Counter Description
On receipt by the eNodeB of an E-RAB MODIFY REQUEST message, each E-RAB
attempted to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB receives the RABModifyRequest message from the MME in which
IE:E-RAB to be Modified List includs E-RAB.
2-224
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RABModifyRequest message from the MME in which IE:E-RAB to be Modified List
includs E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.74 C373505489
Counter Name
Number of E-RAB Successful Modification
Short Name
ERAB.ModQoSSuccNbr
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message, in which
each E-RAB successfully modified the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the E-RAB Modify
List IE includes E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABModifyResponse to MME and the E-RAB Modify List IE includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-225
Unit
unit
2.3.3.75 C373505490
Counter Name
Number of E-RAB Modification Failure due to ENB Admission Failure
Short Name
ERAB.ModQoSFailNbr.AdFail
Counter Description
On transmission by the eNodeB of an E-RAB MODIFY RESPONSE message for
admission failures, in which each E-RAB failed to modify the QoS parameter is added to
the counter.
Triggering Point
When the eNodeB occurs E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the the E-RAB failed to Modify List
includes the E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB occurs E-RAB admission
failures then sends E-RABModifyResponse to MME, in which the E-RAB Failed to Modify
List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.76 C373505491
Counter Name
Number of E-RAB Modification Failure due to Uu interface Failure
2-226
Short Name
ERAB.ModQoSFailNbr.UuFail
Counter Description
The timer expires for an expected RRCConnectionReconfigurationComplete message not
received by the eNodeB,the eNodeB sends an E-RAB MODIFY RESPONSE message to
the MME, in which each E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to timeout of
waiting for the RRCConnectionReconfigurationComplete message,and the E-RAB failed
to Modify List includes the E-RAB.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB
sends E-RABModifyResponse to MME due to timeout of waiting for the
RRCConnectionReconfigurationComplete message,and E-RAB Failed to Modify List
includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.77 C373505492
Counter Name
Number of E-RAB Modification Failure due to Handover Trigger
Short Name
ERAB.ModQoSFailNbr.HoTrig
Counter Description
For handover, the eNodeB sends a E-RAB MODIFY RESPONSE message to the MME,
in which each E-RAB failed to modify the QoS parameter is added to the counter.
2-227
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to handover
trigger,and the E-RAB failed to Modify List includes the E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABModifyResponse to MME due to handover trigger. ,and the E-RAB Failed to
Modify List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.78 C373505493
Counter Name
Number of E-RAB Modification Failure due to Parameter Error
Short Name
ERAB.ModQoSFailNbr.ParaErr
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for parameter error, in which each
E-RAB failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to message
parameter error ,and the E-RAB failed to Modify List includes the E-RAB.
Refer to Sampling Point 4.
2-228
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABModifyResponse to MME due to message parameter error,and the E-RAB Failed
to Modify List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.3.3.79 C373505494
Counter Name
Number of E-RAB Modification Failure due to Receiving RRC Re-establishment Request
Short Name
ERAB.ModQoSFailNbr.RRCReestablishment
Counter Description
For receiving the RRCConnectionReestablishmentRequest message, the eNodeB sends
the E-RAB MODIFY RESPONSE message to the MME.each E-RAB failed to an modify
the QoS parameter message is added to the counter.
Triggering Point
When the eNodeB sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes E-RABs.
Update Description
The counter is incremented by 1 for every E-RAB When the eNodeB sends the
E-RABModifyResponse message to the MME due to RRC re-establishment and the
E-RAB Failed to Modify List includes the E-RAB.
Counter Type
Accumulated value
2-229
Sampling Period
Event triggered
Unit
unit
2.3.3.80 C373505495
Counter Name
Number of E-RAB Modification Failure due to Other Reason
Short Name
ERAB.ModQoSFailNbr.Other
Counter Description
When the eNodeB receives the E-RABModifyRequest message from the MME, then
replies an E-RAB MODIFY RESPONSE message for other reason, in which each E-RAB
failed to modify the QoS parameter is added to the counter.
Triggering Point
When the eNodeB replies the E-RABModifyResponse message to MME due to other
reason,and the E-RAB failed to Modify List includes the E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends
E-RABModifyResponse to MME due to other reason,and the E-RAB Failed to Modify
List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-230
l Sampling Point 1: The EUTRAN receives the E-RAB RELEASE COMMAND message
from the MME.
l Sampling Point 2: The EUTRAN sends the E-RAB RELEASE RESPONSE message
to the MME, indicating that the E-RAB Release has been successful.
l Sampling Point 3: The EUTRAN sends the E-RAB RELEASE INDICATION message
to the MME.
l Sampling Point 4: The EUTRAN sends the UE Context ReleaseRequest message to
the MME.
l Sampling Point 5: The EUTRAN receives the UE Context ReleaseCommand
message from the MME.
l Sampling Point 6: The EUTRAN receives the RESET message from the MME.
l Sampling Point 7: The EUTRAN receives the Error Indication message from the MME.
2-231
20 C373210381 Number of E-RAB Release by ENB Through E-RAB Release Procedure due
to Overload Control
2-232
30 C373210391 Number of E-RAB Release by ENB Through E-RAB Release Procedure due
to Other Abnormal Reason
2-233
2-234
67 C373210441 Number of E-RAB Release by ENB Through E-RAB Release Procedure due
to Radio Link Failure
2-235
97 C373210511 Number of E-RAB Release by ENB Through E-RAB Release Procedure due
to Shut Down or Reset Cell
2-236
100 C373210514 Number of QCI3 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
101 C373210515 Number of QCI4 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
102 C373210516 Number of QCI5 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
103 C373210517 Number of QCI6 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
104 C373210518 Number of QCI7 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
105 C373210519 Number of QCI8 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
106 C373210520 Number of QCI9 E-RAB Release by MME due to Error Indication or
Reestablish inter eNB
107 C373210521 Number of E-RAB Release by MME due to Error Indication or Reestablish
inter eNB
108 C373210522 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
109 C373210523 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
110 C373210524 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
111 C373210525 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
112 C373210526 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
113 C373210527 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
114 C373210528 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
115 C373210529 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
2-237
116 C373210530 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
117 C373210531 Number of E-RAB Release by ENB Through E-RAB Release Procedure
due to Redirection
136 C373505345 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
137 C373505346 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
138 C373505347 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
139 C373505348 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
140 C373505349 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
141 C373505350 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
2-238
142 C373505351 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
143 C373505352 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
144 C373505353 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
145 C373505354 Number of E-RAB Release by ENB Through E-RAB Release Procedure
due to S1 Link Error
146 C373505355 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
147 C373505356 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
148 C373505357 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
149 C373505358 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
150 C373505359 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
151 C373505360 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
152 C373505361 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
153 C373505362 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
154 C373505363 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
155 C373505364 Number of E-RAB Release by ENB Through E-RAB Release Procedure
due to CCO Cause
2-239
166 C373505462 Number of QCI1 E-RAB Release by MME due to Other Reason
167 C373505463 Number of QCI2 E-RAB Release by MME due to Other Reason
168 C373505464 Number of QCI3 E-RAB Release by MME due to Other Reason
169 C373505465 Number of QCI4 E-RAB Release by MME due to Other Reason
170 C373505466 Number of QCI5 E-RAB Release by MME due to Other Reason
171 C373505467 Number of QCI6 E-RAB Release by MME due to Other Reason
172 C373505468 Number of QCI7 E-RAB Release by MME due to Other Reason
173 C373505469 Number of QCI8 E-RAB Release by MME due to Other Reason
174 C373505470 Number of QCI9 E-RAB Release by MME due to Other Reason
Counter Name
Number of QCI1 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI1
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI1 E-RABs release
successful initiated by MME is added to the counter.
2-240
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI1 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI1 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.2 C373210363
Counter Name
Number of QCI2 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI2
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI2 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
2-241
To Be Released List includes the QCI2 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI2 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.3 C373210364
Counter Name
Number of QCI3 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI3
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI3 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI3 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
2-242
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI3 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.4 C373210365
Counter Name
Number of QCI4 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI4
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI4 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI4 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
2-243
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.5 C373210366
Counter Name
Number of QCI5 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI5
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI5 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI5 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI5 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
2-244
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.6 C373210367
Counter Name
Number of QCI6 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI6
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI6 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI6 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI6 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
2-245
Sampling Period
Event triggered
Unit
unit
2.4.3.7 C373210368
Counter Name
Number of QCI7 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI7
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI7 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI7 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI7 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-246
Unit
unit
2.4.3.8 C373210369
Counter Name
Number of QCI8 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI8
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI8 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI8 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI8 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-247
2.4.3.9 C373210370
Counter Name
Number of QCI9 E-RAB Release by MME Normal Release
Short Name
ERAB.RelAttNbr.MmeReqQCI9
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above QCI9 E-RABs release
successful initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME then
replies the E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI9 E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
QCI9 E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message
from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.10 C373210371
Counter Name
Number of E-RAB Release by MME Normal Release
2-248
Short Name
ERAB.RelAttNbr.MmeReq
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from the MME, in which the Cause is Normal Relase, Detach, Authentication
failure or Interaction with other procedure. Each above E-RABs release successful
initiated by MME is added to the counter
Triggering Point
When the eNodeB receives the E-RABReleaseCommand message from MME
then replies the E-RAB RELEASE RESPONSE message to MME, and in which IE
E-RAB To Be Released List includes the E-RAB. Or When the eNodeB receives the
UEContextReleaseCommand message from the MME.
Refer to Sampling Point 2, Sampling Point 5.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives
the E-RABReleaseCommand message from MME then replies the E-RAB RELEASE
RESPONSE message to MME, and in which IE E-RAB To Be Released List includes the
E-RAB. Or When the eNodeB receives the UEContextReleaseCommand message from
the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.11 C373210372
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI1
2-249
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI1 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI1 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.12 C373210373
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI2
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI2 E-RAB is released for above
reason,it is added to the counter.
2-250
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI2 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.13 C373210374
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI3
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI3 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI3 E-RAB.
Refer to Sampling Point 3.
2-251
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.14 C373210375
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI4
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI4 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI4 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI4 E-RAB.
Counter Type
Accumulated value
2-252
Sampling Period
Event triggered
Unit
unit
2.4.3.15 C373210376
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI5
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI5 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI5 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-253
2.4.3.16 C373210377
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI6
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI6 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI6 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.17 C373210378
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
2-254
Short Name
ERAB.RelEnbNbr.OverLoadQCI7
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI7 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI7 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.18 C373210379
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI8
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI8 E-RAB is released for above
reason,it is added to the counter.
2-255
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI8 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.19 C373210380
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to
Overload Control
Short Name
ERAB.RelEnbNbr.OverLoadQCI9
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When QCI9 E-RAB is released for above
reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload,and the E-RAB To Be Released List includes the QCI9 E-RAB.
Refer to Sampling Point 3.
2-256
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl,and the E-RAB released List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.20 C373210381
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Overload
Control
Short Name
ERAB.RelEnbNbr.CauseOverLoadControl
Counter Description
In the condition of opening "Load Control" switch,the eNodeB trigger the some appropriate
traffics to release when detecting cell overloading.When a E-RAB is released for above
reason, it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to detection
overload
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
LoadControl.
Counter Type
Accumulated value
2-257
Sampling Period
Event triggered
Unit
unit
2.4.3.21 C373210382
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI1
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI1 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI1 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-258
2.4.3.22 C373210383
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI2
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI2 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI2 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.23 C373210384
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI3
2-259
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI3 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI3 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.24 C373210385
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI4
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI4 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI4 E-RAB.
Refer to Sampling Point 3.
2-260
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.25 C373210386
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI5
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI5 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI5 E-RAB.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI5 E-RAB.
Counter Type
Accumulated value
2-261
Sampling Period
Event triggered
Unit
unit
2.4.3.26 C373210387
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI6
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI6 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI6 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-262
2.4.3.27 C373210388
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI7
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI7 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI7 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.28 C373210389
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI8
2-263
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI8 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI8 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.29 C373210390
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.OtherQCI9
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above QCI9 E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI9 E-RAB.
Refer to Sampling Point 3.
2-264
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason,and the E-RAB To Be
Released List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.30 C373210391
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Other
Abnormal Reason
Short Name
ERAB.RelEnbNbr.Other
Counter Description
For other reason, the eNodeB sends the E-RABReleaseIndication message to MME. Each
above E-RABs initiated by eNodeB is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to other
reason
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to other reason.
Counter Type
Accumulated value
2-265
Sampling Period
Event triggered
Unit
unit
2.4.3.31 C373210392
Counter Name
Number of E-RAB Release due to Uu interface Timeout
Short Name
ERAB.RelEnbNbr.eNodebUuTimeOut
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. When the RNLC detects the expiry of the Uu interface
signaling timer and sends a CONTEXT RELEASE REQUEST message to the MME, this
counter is incremented. The corresponding release cause is reported to "C373210441
Number of E-RAB Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC detects the expiry of the Uu interface signaling timer and sends a
CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 3.
Update Description
When the RNLC detects the expiry of the Uu interface signaling timer and sends a
CONTEXT RELEASE REQUEST message to the MME, this counter is incremented by
one for each E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-266
2.4.3.32 C373210393
Counter Name
Number of E-RAB Release due to RLF triggered by Poor Uu Quality
Short Name
ERAB.RelEnbNbr.eNodebRlfPoorUuQua
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. This counter is incremented when the RNLC receives
an RLF message reported by the CMAC indicating an invalid uplink SRS measurement,
high uplink or downlink HARQFail, and sends a CONTEXT RELEASE REQUEST message
to the MME.The corresponding release cause is reported to "C373210441 Number of
E-RAB Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC receives an RLF message reported by the CMAC indicating an invalid
uplink SRS measurement, high uplink or downlink HARQFail, and sends a CONTEXT
RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 3.
Update Description
When the RNLC receives an RLF message reported by the CMAC indicating an invalid
uplink SRS measurement, high uplink or downlink HARQFail, and sends a CONTEXT
RELEASE REQUEST message to the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.33 C373210394
Counter Name
Number of E-RAB Release due to Maximum of RLC Retransmission
2-267
Short Name
ERAB.RelEnbNbr.eNodebMaxRlcRetrans
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. This counter is incremented when the RNLC
receives an RNLU error message that indicates an RLC error, and sends a CONTEXT
RELEASE REQUEST message to the MME.The corresponding release cause is reported
to "C373210441 Number of E-RAB Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates an RLC error, and sends
a CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 3.
Update Description
When the RNLC receives an RNLU error message that indicates an RLC error, and sends
a CONTEXT RELEASE REQUEST message to the MME, this counter is incremented by
one for each E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.34 C373210395
Counter Name
Number of E-RAB Release due to PDCP Integrity protection Failure
Short Name
ERAB.RelEnbNbr.eNodebPdcpInteProFail
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. This counter is incremented when the RNLC
2-268
receives an RNLU error message that indicates a PDCP error, and sends a CONTEXT
RELEASE REQUEST message to the MME.The corresponding release cause is reported
to "C373210441 Number of E-RAB Release due to ENB Radio Link Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates a PDCP error, and sends
a CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 3.
Update Description
When the RNLC receives an RNLU error message that indicates a PDCP error, and sends
a CONTEXT RELEASE REQUEST message to the MME, this counter is incremented by
one for each E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.35 C373210396
Counter Name
Number of E-RAB Release due to GTPU Error Indication
Short Name
ERAB.RelEnbNbr.eNodebGtpuErrInd
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. This counter is incremented when the RNLC receives
an RNLU error message that indicates a GTPU error, and sends a CONTEXT RELEASE
REQUEST message to the MME.The corresponding release cause is reported to
"C373505354 Number of E-RAB Release Initiated by the ENB due to S1 Link Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates a GTPU error, and sends
a CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
2-269
Update Description
When the RNLC receives an RNLU error message that indicates a GTPU error, and sends
a CONTEXT RELEASE REQUEST message to the MME, this counter is incremented by
one for each E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.36 C373210397
Counter Name
Number of E-RAB Release due to Path Fault
Short Name
ERAB.RelEnbNbr.eNodebPathFault
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. When the RNLC receives a PATH fault reported by the
RNLU, and sends a CONTEXT RELEASE REQUEST message to the MME, this counter
is incremented.The corresponding release cause is reported to "C373505354 Number of
E-RAB Release Initiated by the ENB due to S1 Link Failure".
Triggering Point
When the RNLC receives a PATH fault reported by the RNLU, and sends a CONTEXT
RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 4.
Update Description
When the RNLC receives a PATH fault reported by the RNLU, and sends a CONTEXT
RELEASE REQUEST message to the MME, this counter is incremented by one for each
E-RAB.
2-270
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.37 C373210398
Counter Name
Number of E-RAB Release due to Optical Port Fault
Short Name
ERAB.RelEnbNbr.eNodebOpticalFault
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. When the RNLC receives an OAM optical interface
fault and sends a CONTEXT RELEASE REQUEST message to the MME, this counter
is incremented.The corresponding release cause is reported to "C373505354 Number of
E-RAB Release Initiated by the ENB due to S1 Link Failure".
Triggering Point
When the RNLC receives an OAM optical interface fault and sends a CONTEXT RELEASE
REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 4.
Update Description
When the RNLC receives an OAM optical interface fault and sends a CONTEXT RELEASE
REQUEST message to the MME, this counter is incremented by one for each E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-271
Unit
unit
2.4.3.38 C373210412
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI1
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI1 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI1 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-272
2.4.3.39 C373210413
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI2
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI2 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI2 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.40 C373210414
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
2-273
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI3
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI3 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI3 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.41 C373210415
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI4
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI4 E-RAB is released for
above reason,it is added to the counter.
2-274
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI4 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.42 C373210416
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI5
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI5 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI5 E-RAB.
Refer to Sampling Point 3.
2-275
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.43 C373210417
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI6
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI6 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI6 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI6 E-RAB.
Counter Type
Accumulated value
2-276
Sampling Period
Event triggered
Unit
unit
2.4.3.44 C373210418
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI7
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI7 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI7 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-277
2.4.3.45 C373210419
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI8
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI8 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI8 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.46 C373210420
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
2-278
Short Name
ERAB.RelEnbNbr.eNodebCellCongestionQCI9
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI9 E-RAB is released for
above reason,it is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI9 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.47 C373210421
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Cell
Congestion
Short Name
ERAB.RelEnbNbr.eNodebCellCongestion
Counter Description
In the condition of opening "Congestion Control" switch,the eNodeB trigger the some
appropriate traffics to release when cell congestion.When QCI1 E-RAB is released for
above reason,it is added to the counter.
2-279
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to cell
congestion,and the E-RAB To Be Released List includes the QCI1 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when eNodeB sends the E-RAB
RELEASE INDICATION message or UE Context Release Request to the MME due to
Congestion Control,and the E-RAB released List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.48 C373210422
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI1
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI1 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI1 E-RAB release due to handover failures.
Refer to Sampling Point 5.
2-280
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI1 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.49 C373210423
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI2
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI2 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI2 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI2 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
2-281
Sampling Period
Event triggered
Unit
unit
2.4.3.50 C373210424
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI3
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI3 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI3 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI3 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-282
2.4.3.51 C373210425
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI4
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI4 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI4 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI4 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.52 C373210426
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
2-283
Short Name
ERAB.RelEnbNbr.HOFailQCI5
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI5 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI5 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI5 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.53 C373210427
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI6
2-284
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI6 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI6 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI6 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.54 C373210428
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI7
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
2-285
Each above two conditions QCI7 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI7 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI7 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.55 C373210429
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI8
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI8 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI8 E-RAB release due to handover failures.
Refer to Sampling Point 5.
2-286
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI8 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.56 C373210430
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to HO
Fail
Short Name
ERAB.RelEnbNbr.HOFailQCI9
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions QCI9 E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger QCI9 E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger QCI9 E-RAB realese due to
handover failures.
Counter Type
Accumulated value
2-287
Sampling Period
Event triggered
Unit
unit
2.4.3.57 C373210431
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to HO Fail
Short Name
ERAB.RelEnbNbr.CauseHOFail
Counter Description
1 A UE is realesed by the source eNodeB due to an expected
UEContextReleaseCommand or UEContextRelease message indicating handover
complete not received by the eNodeB.
2 The eNodeB receives the HANDOVER COMMAND message then release the partial
E-RABs due to the target preparation failure.
Each above two conditions E-RAB realeased is added to the counter.
Triggering Point
When the eNodeB trigger a E-RAB release due to handover failures.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB trigger a E-RAB realese due to
handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-288
2.4.3.58 C373210432
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI1
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI1 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures, and the E-RAB To
Be Released List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-289
2.4.3.59 C373210433
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI2
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI2 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-290
2.4.3.60 C373210434
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI3
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI3 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-291
2.4.3.61 C373210435
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI4
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI4 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-292
2.4.3.62 C373210436
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI5
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI5 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-293
2.4.3.63 C373210437
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI6
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI6 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-294
2.4.3.64 C373210438
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI7
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI7 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-295
2.4.3.65 C373210439
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI8
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI8 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-296
2.4.3.66 C373210440
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to Radio
Link Failure
Short Name
ERAB.RelEnbNbr.RadioLinkFailQCI9
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI9 E-RAB.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures,and the E-RAB To
Be Released List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-297
2.4.3.67 C373210441
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Radio Link
Failure
Short Name
ERAB.RelEnbNbr.CauseRadioLinkFail
Counter Description
When a RLC PDU is transfered then exceeded the maximum number on the downlink, it
is regarded as RLF.
When eNodeB's timer expires that monitoring the message from the the UE to eNodeB, it is
regarded as RLF. For example, the RRCConnectionReestablishmentComplete message,
the RRCConnectionReconfigurationComplete message and so on.
When a SR is transfered then exceeded the maximum number,it is regarded as RLF.
Triggering Point
When the eNodeB sends the E-RABReleaseIndication message to MME due to radio link
failures
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB sends the
E-RABReleaseIndication message to MME due to radio link failures
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.68 C373210442
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
2-298
Short Name
ERAB.RelEnbNbr.ReestFailQCI1
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI1 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI1
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.69 C373210443
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI2
2-299
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI2 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI2
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.70 C373210444
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI3
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI3 E-RAB released is added to the counter.
2-300
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI3
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.71 C373210445
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI4
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI4 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI4
E-RAB.
Refer to Sampling Point 4.
2-301
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.72 C373210446
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI5
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI5 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI5
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI5 E-RAB.
2-302
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.73 C373210447
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI6
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI6 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI6
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-303
Unit
unit
2.4.3.74 C373210448
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI7
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI7 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI7
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-304
2.4.3.75 C373210449
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
Short Name
ERAB.RelEnbNbr.ReestFailQCI8
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI8 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI8
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.76 C373210450
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to
Reestablish Fail
2-305
Short Name
ERAB.RelEnbNbr.ReestFailQCI9
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above QCI9 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the E-RAB To Be Released List includes the QCI9
E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures,and the UE has the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.77 C373210451
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Reestablish
Fail
Short Name
ERAB.RelEnbNbr.ReestFail
2-306
Counter Description
Transmission of a UE CONTEXT RELEASE REQUEST message by the eNodeB to
the MME when eNodeB occur RRC connection reestablishment failures then sends the
RRCConnectionReestablishmentReject message to the UE.
Each above E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to RRC connection reestablishment
failures
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.78 C373210492
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI1
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI1 E-RAB released is added to
the counter.
2-307
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI1
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.79 C373210493
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI2
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI2 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI2 E-RAB.
Refer to Sampling Point 4.
2-308
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI2
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.80 C373210494
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI3
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI3 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI3 E-RAB.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI3
E-RAB.
2-309
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.81 C373210495
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI4
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI4 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI4
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-310
Unit
unit
2.4.3.82 C373210496
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI5
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI5 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI5
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-311
2.4.3.83 C373210497
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI6
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI6 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI6 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI6
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.84 C373210498
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
2-312
Short Name
ERAB.RelEnbNbr.UserInactiveQCI7
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI7 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI7
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.85 C373210499
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI8
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
2-313
user is regarded as "inactivity". Each above condition QCI8 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI8
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.86 C373210500
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactiveQCI9
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition QCI9 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI9 E-RAB.
2-314
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive,and the UE has QCI9
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.87 C373210501
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to
UserInactive
Short Name
ERAB.RelEnbNbr.UserInactive
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity". Each above condition E-RAB released is added to the
counter.
Triggering Point
The counter is incremented by 1 for every E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to user inactive.
2-315
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.88 C373210502
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI1
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI1 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or Reset,and the UE has QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-316
Unit
unit
2.4.3.89 C373210503
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI2
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI2 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-317
2.4.3.90 C373210504
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI3
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm that trigger UE release.
Each above two conditions QCI3 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI3 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.91 C373210505
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
2-318
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI4
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI4 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.92 C373210506
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI5
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
2-319
Each above two conditions QCI5 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.93 C373210507
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI6
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI6 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI6 E-RAB.
Refer to Sampling Point 4.
2-320
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.94 C373210508
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI7
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI7 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI7 E-RAB.
Counter Type
Accumulated value
2-321
Sampling Period
Event triggered
Unit
unit
2.4.3.95 C373210509
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI8
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI8 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-322
2.4.3.96 C373210510
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to Shut
Down or Reset Cell
Short Name
ERAB.RelEnbNbr.CellBlockOrResetQCI9
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI9 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to cell
block or reset,and the UE has QCI9 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset,and the UE has
QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.97 C373210511
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Shut Down
or Reset Cell
2-323
Short Name
ERAB.RelEnbNbr.CellBlockOrReset
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions E-RAB released is added to the counter.
Triggering Point
The counter is incremented by 1 for every E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to cell block or reset.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.98 C373210512
Counter Name
Number of QCI1 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI1
Counter Description
The counter is used to count the number of QCI1 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
2-324
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
Update Description
The counter is incremented by the number of QCI1 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.99 C373210513
Counter Name
Number of QCI2 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI2
Counter Description
The counter is used to count the number of QCI2 E-RABs Release initiated by MME due
to the following two conditions.
2-325
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
Update Description
The counter is incremented by the number of QCI2 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.100 C373210514
Counter Name
Number of QCI3 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI3
Counter Description
The counter is used to count the number of QCI3 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2-326
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
Update Description
The counter is incremented by the number of QCI3 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.101 C373210515
Counter Name
Number of QCI4 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI4
Counter Description
The counter is used to count the number of QCI4 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
2-327
Update Description
The counter is incremented by the number of QCI4 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.102 C373210516
Counter Name
Number of QCI5 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI5
Counter Description
The counter is used to count the number of QCI5 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
2-328
Update Description
The counter is incremented by the number of QCI5 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.103 C373210517
Counter Name
Number of QCI6 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI6
Counter Description
The counter is used to count the number of QCI6 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
2-329
Update Description
The counter is incremented by the number of QCI6 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.104 C373210518
Counter Name
Number of QCI7 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI7
Counter Description
The counter is used to count the number of QCI7 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
2-330
Update Description
The counter is incremented by the number of QCI7 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.105 C373210519
Counter Name
Number of QCI8 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI8
Counter Description
The counter is used to count the number of QCI8 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
2-331
Update Description
The counter is incremented by the number of QCI8 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.106 C373210520
Counter Name
Number of QCI9 E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorIndQCI9
Counter Description
The counter is used to count the number of QCI9 E-RABs Release initiated by MME due
to the following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
2-332
Update Description
The counter is incremented by the number of QCI9 E-RABs released when the eNodeB
receives the ErrorIndication message or UEContextReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.107 C373210521
Counter Name
Number of E-RAB Release by MME due to Error Indication or Reestablish inter eNB
Short Name
ERAB.RelAttNbr.MmeErrorInd
Counter Description
The counter is used to count the number of E-RABs Release initiated by MME due to the
following two conditions.
1 The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause is Failure in the Radio Interface Procedure, then release the UE Context; 2
The eNodeB receives the ErrorIndication message from the MME, then release the UE
Context.
.
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 5, Sampling Point 7.
Update Description
The counter is incremented by the number of E-RABs released when the eNodeB receives
the ErrorIndication message or UEContextReleaseCommand message from the MME.
2-333
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.108 C373210522
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI1
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI1 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI1
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-334
Unit
unit
2.4.3.109 C373210523
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI2
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI2 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI2 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI2
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-335
2.4.3.110 C373210524
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI3
Counter Description
The eNodeB concludes UE When the eNodeB concludes UE redirection to other
cell, it sends the UeContextReleaseRequest message to MME after sending the
RRCConnectionRelease message to UE. Each above QCI3 E-RAB released is added to
the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI3 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI3
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.111 C373210525
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
2-336
Short Name
ERAB.RelEnbNbr.RedirectionQCI4
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI4 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI4
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.112 C373210526
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI5
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI5 E-RAB released is added to the counter.
2-337
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI5 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI5
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.113 C373210527
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI6
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI6 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI6 E-RAB.
Refer to Sampling Point 4.
2-338
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI6
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.114 C373210528
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI7
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI7 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI7
E-RAB.
Counter Type
Accumulated value
2-339
Sampling Period
Event triggered
Unit
unit
2.4.3.115 C373210529
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI8
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI8 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI8
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-340
2.4.3.116 C373210530
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to
Redirection
Short Name
ERAB.RelEnbNbr.RedirectionQCI9
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above QCI9 E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection,and the UE has QCI9 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection,and the UE has QCI9
E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.117 C373210531
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to Redirection
Short Name
ERAB.RelEnbNbr.Redirection
2-341
Counter Description
When the eNodeB concludes UE redirection to other cell, it sends the
UeContextReleaseRequest message to MME after sending the RRCConnectionRelease
message to UE. Each above E-RAB released is added to the counter.
Triggering Point
When the eNodeB sends the UeContextReleaseRequest message to MME due to UE
redirection.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
UeContextReleaseRequest message to MME due to redirection.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.118 C373505309
Counter Name
Number of QCI1 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI1
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI1
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI1 E-RAB.
2-342
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.119 C373505310
Counter Name
Number of QCI2 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI2
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI2
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI2 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI2 E-RAB.
Counter Type
Accumulated value
2-343
Sampling Period
Event triggered
Unit
unit
2.4.3.120 C373505311
Counter Name
Number of QCI3 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI3
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI3
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI3 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-344
2.4.3.121 C373505312
Counter Name
Number of QCI4 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI4
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI4
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI4 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.122 C373505313
Counter Name
Number of QCI5 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI5
2-345
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI5
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI5 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.123 C373505314
Counter Name
Number of QCI6 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI6
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI6
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI6 E-RAB.
2-346
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.124 C373505315
Counter Name
Number of QCI7 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI7
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI7
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI7 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI7 E-RAB.
Counter Type
Accumulated value
2-347
Sampling Period
Event triggered
Unit
unit
2.4.3.125 C373505316
Counter Name
Number of QCI8 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI8
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI8
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI8 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-348
2.4.3.126 C373505317
Counter Name
Number of QCI9 E-RAB Failed to Release
Short Name
ERAB.RelFailNbr.QCI9
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each QCI9
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the QCI9 E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.127 C373505318
Counter Name
Number of QCI1 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI1
2-349
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI1 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI1 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.128 C373505319
Counter Name
Number of QCI2 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI2
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI2 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI2 E-RAB.
2-350
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.129 C373505320
Counter Name
Number of QCI3 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI3
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI3 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI3 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI3 E-RAB.
Counter Type
Accumulated value
2-351
Sampling Period
Event triggered
Unit
unit
2.4.3.130 C373505321
Counter Name
Number of QCI4 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI4
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI4 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI4 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RABs attempted to
release includes the QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-352
2.4.3.131 C373505322
Counter Name
Number of QCI5 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI5
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI5 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI5 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.132 C373505323
Counter Name
Number of QCI6 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI6
2-353
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI6 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI6 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.133 C373505324
Counter Name
Number of QCI7 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI7
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI7 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI7 E-RAB.
2-354
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.134 C373505325
Counter Name
Number of QCI8 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI8
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI8 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI8 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI8 E-RAB.
Counter Type
Accumulated value
2-355
Sampling Period
Event triggered
Unit
unit
2.4.3.135 C373505326
Counter Name
Number of QCI9 E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr.QCI9
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
QCI9 E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI9 E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-356
2.4.3.136 C373505345
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI1
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.137 C373505346
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
2-357
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI2
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.138 C373505347
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI3
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2-358
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.139 C373505348
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI4
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
2-359
Update Description
The counter is incremented by 1 for every QCI4 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.140 C373505349
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI5
Counter Description
The S1 link fault refer to the following.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
2-360
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.141 C373505350
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI6
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-361
Unit
unit
2.4.3.142 C373505351
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI7
Counter Description
The S1 link fault refer to the following.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-362
2.4.3.143 C373505352
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI8
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.144 C373505353
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to S1
Link Error
2-363
Short Name
ERAB.RelEnbNbr.S1LinkErrorQCI9
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB When the eNodeB sends the UE
Context ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.145 C373505354
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to S1 Link
Error
Short Name
ERAB.RelEnbNbr.S1LinkError
Counter Description
The S1 link fault refer to the following.
1 The eNodeB detects the fibber warning.
2-364
2 The eNodeB gtpu layer detects the path fault from the eNodeB to SGW.
3 The eNodeB gtpu layer receives the ErrorIndication message from the SGW.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to S1
link fault.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB When the eNodeB sends the UE Context
ReleaseRequest message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.146 C373505355
Counter Name
Number of QCI1 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI1
Counter Description
The QCI1 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI1 E-RABs.
2-365
Update Description
The counter is incremented by 1 for every QCI1 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.147 C373505356
Counter Name
Number of QCI2 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI2
Counter Description
The QCI2 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI2 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-366
Unit
unit
2.4.3.148 C373505357
Counter Name
Number of QCI3 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI3
Counter Description
The QCI3 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI3 E-RABs.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.149 C373505358
Counter Name
Number of QCI4 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
2-367
Short Name
ERAB.RelEnbNbr.CCOQCI4
Counter Description
The QCI4 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI4 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.150 C373505359
Counter Name
Number of QCI5 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI5
Counter Description
The QCI5 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
2-368
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI5 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.151 C373505360
Counter Name
Number of QCI6 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI6
Counter Description
The QCI6 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI6 E-RABs.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
2-369
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.152 C373505361
Counter Name
Number of QCI7 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI7
Counter Description
The QCI7 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI7 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-370
2.4.3.153 C373505362
Counter Name
Number of QCI8 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI8
Counter Description
The QCI8 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI8 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.154 C373505363
Counter Name
Number of QCI9 E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCOQCI9
2-371
Counter Description
The QCI9 E-RABs requested to be released by eNodeB due to CCO are added to the
counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO and the User has QCI9 E-RABs.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI9 E-RAB when the eNodeB sends the UE
Context ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.155 C373505364
Counter Name
Number of E-RAB Release by ENB Through E-RAB Release Procedure due to CCO
Cause
Short Name
ERAB.RelEnbNbr.CCO
Counter Description
The E-RABs requested to be released by eNodeB due to CCO are added to the counter.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO.
2-372
Update Description
The counter is incremented by 1 for every E-RAB when the eNodeB sends the UE Context
ReleaseRequest message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.156 C373505452
Counter Name
Number of QCI1 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI1
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI1 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI1 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-373
Unit
unit
2.4.3.157 C373505453
Counter Name
Number of QCI2 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI2
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI2 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI2 E-RAB.
Update Description
The counter is incremented by 1 for every QCI2 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.158 C373505454
Counter Name
Number of QCI3 E-RAB Release by ENB due to UE off-line
2-374
Short Name
ERAB.RelEnbNbr.UEOffQCI3
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI3 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI3 E-RAB.
Update Description
The counter is incremented by 1 for every QCI3 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.159 C373505455
Counter Name
Number of QCI4 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI4
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI4 E-RAB released
is added to the counter.
2-375
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI4 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI4 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.160 C373505456
Counter Name
Number of QCI5 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI5
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI5 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI5 E-RAB.
Update Description
The counter is incremented by 1 for every QCI5 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
2-376
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.161 C373505457
Counter Name
Number of QCI6 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI6
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI6 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI6 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI6 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-377
2.4.3.162 C373505458
Counter Name
Number of QCI7 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI7
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI7 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI7 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI7 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.163 C373505459
Counter Name
Number of QCI8 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI8
2-378
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI8 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI8 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every QCI8 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.164 C373505460
Counter Name
Number of QCI9 E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOffQCI9
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above QCI9 E-RAB released
is added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI9 E-RAB.
Refer to Sampling Point 4.
2-379
Update Description
The counter is incremented by 1 for every QCI9 E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.165 C373505461
Counter Name
Number of E-RAB Release by ENB due to UE off-line
Short Name
ERAB.RelEnbNbr.UEOff
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.Each above E-RAB released is
added to the counter.
Triggering Point
When the eNodeB sends the UE ContextReleaseRequest message to the MME due to
Radio Connection With UE Lost and the UE has QCI10 E-RAB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 for every E-RAB When the eNodeB sends the UE
ContextReleaseRequest message to the MME due to Radio Connection With UE Lost.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-380
Unit
unit
2.4.3.166 C373505462
Counter Name
Number of QCI1 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI1
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI1
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI1 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-381
2.4.3.167 C373505463
Counter Name
Number of QCI2 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI2
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI2
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI2 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.168 C373505464
Counter Name
Number of QCI3 E-RAB Release by MME due to Other Reason
2-382
Short Name
ERAB.RelMmeNbr.S1ResetQCI3
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI3
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI3 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.169 C373505465
Counter Name
Number of QCI4 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI4
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
2-383
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI4 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.170 C373505466
Counter Name
Number of QCI5 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI5
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI5
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
2-384
Refer to .
Update Description
The counter is incremented by the number of QCI5 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.171 C373505467
Counter Name
Number of QCI6 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI6
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI6
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI6 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
2-385
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.172 C373505468
Counter Name
Number of QCI7 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI7
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI7
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI7 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-386
Unit
unit
2.4.3.173 C373505469
Counter Name
Number of QCI8 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI8
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI8
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI8 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-387
2.4.3.174 C373505470
Counter Name
Number of QCI9 E-RAB Release by MME due to Other Reason
Short Name
ERAB.RelMmeNbr.S1ResetQCI9
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of QCI9
E-RABs Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI9 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.175 C373505471
Counter Name
Number of E-RAB Release by MME due to Other Reason
2-388
Short Name
ERAB.RelMmeNbr.S1Reset
Counter Description
The eNodeB receives the UEContextReleaseCommand or E-RABReleaseCommand
message from MME, in which the Cause excludes Normal Release, Detach ,
Authentication failure, Interaction with other procedure,Successful Handover and Failure
in the Radio Interface Procedure. The counter is used to count the number of E-RABs
Release initiated by MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand or
E-RABReleaseCommand message from the MME.
Refer to .
Update Description
The counter is incremented by the number of QCI1 E-RAB released when the eNodeB
receives the UEContextReleaseCommand or E-RABReleaseCommand message from the
MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.176 C373505496
Counter Name
Number of E-RAB Attempted to Release
Short Name
ERAB.RelAttNbr
Counter Description
On receipt by the eNodeB of an E-RAB RELEASE COMMAND message from MME, each
E-RAB failed to release is added to the counter.
2-389
Triggering Point
When the eNodeB receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the E-RAB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB receives the
E-RAB RELEASE COMMAND message from the MME in which IE:E-RAB To Be Released
List includes the E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.4.3.177 C373505497
Counter Name
Number of E-RAB Failed to Release
Short Name
ERAB.RelFailNbr
Counter Description
On transmission by the eNodeB of an E-RAB RELEASE RESPONSE message, each
E-RAB failed to release is added to the counter.
Triggering Point
When the eNodeB sends the E-RABReleaseReponse message to the MME, and IE
E-RABs Failed to Release List include the E-RAB.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 for every this E-RAB when the eNodeB sends the
E-RABReleaseReponse message to the MME, and IE E-RABs Failed to Release List
include the E-RAB.
2-390
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-391
2-392
Counter Name
Number of Successful E-RAB(QCI1) HO Incoming
Short Name
ERAB.HoInSucc.QCI1
Counter Description
Each QCI1 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI1 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI1 E-RAB.
2-393
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.2 C373210453
Counter Name
Number of Successful E-RAB(QCI2) HO Incoming
Short Name
ERAB.HoInSucc.QCI2
Counter Description
Each QCI2 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI2 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-394
2.5.3.3 C373210454
Counter Name
Number of Successful E-RAB(QCI3) HO Incoming
Short Name
ERAB.HoInSucc.QCI3
Counter Description
Each QCI3 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI3 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.4 C373210455
Counter Name
Number of Successful E-RAB(QCI4) HO Incoming
Short Name
ERAB.HoInSucc.QCI4
2-395
Counter Description
Each QCI4 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI4 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.5 C373210456
Counter Name
Number of Successful E-RAB(QCI5) HO Incoming
Short Name
ERAB.HoInSucc.QCI5
Counter Description
Each QCI5 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI5 E-RAB.
Refer to .
2-396
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.6 C373210457
Counter Name
Number of Successful E-RAB(QCI6) HO Incoming
Short Name
ERAB.HoInSucc.QCI6
Counter Description
Each QCI6 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI6 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI6 E-RAB.
Counter Type
Accumulated value
2-397
Sampling Period
Event triggered
Unit
unit
2.5.3.7 C373210458
Counter Name
Number of Successful E-RAB(QCI7) HO Incoming
Short Name
ERAB.HoInSucc.QCI7
Counter Description
Each QCI7 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI7 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-398
2.5.3.8 C373210459
Counter Name
Number of Successful E-RAB(QCI8) HO Incoming
Short Name
ERAB.HoInSucc.QCI8
Counter Description
Each QCI8 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI8 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.9 C373210460
Counter Name
Number of Successful E-RAB(QCI9) HO Incoming
Short Name
ERAB.HoInSucc.QCI9
2-399
Counter Description
Each QCI9 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete and the
UE has QCI9 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete and the UE has QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.10 C373210461
Counter Name
Number of Successful E-RAB HO Incoming
Short Name
ERAB.HoInSucc
Counter Description
Each E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover complete.
Refer to .
2-400
Update Description
The counter is incremented by 1 for every E-RAB when the target eNodeB sends the
HandoverNotify message to the MME or sends the UeContextRelease message to the
source eNodeB indicating handover complete.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.11 C373210462
Counter Name
Number of Successful E-RAB(QCI1) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI1
Counter Description
Each QCI1 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI1 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI1 E-RAB.
Counter Type
Accumulated value
2-401
Sampling Period
Event triggered
Unit
unit
2.5.3.12 C373210463
Counter Name
Number of Successful E-RAB(QCI2) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI2
Counter Description
Each QCI2 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI2 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-402
2.5.3.13 C373210464
Counter Name
Number of Successful E-RAB(QCI3) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI3
Counter Description
Each QCI3 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI3 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.14 C373210465
Counter Name
Number of Successful E-RAB(QCI4) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI4
2-403
Counter Description
Each QCI4 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI4 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.15 C373210466
Counter Name
Number of Successful E-RAB(QCI5) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI5
Counter Description
Each QCI5 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI5 E-RAB.
Refer to .
2-404
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.16 C373210467
Counter Name
Number of Successful E-RAB(QCI6) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI6
Counter Description
Each QCI6 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI6 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI6 E-RAB.
Counter Type
Accumulated value
2-405
Sampling Period
Event triggered
Unit
unit
2.5.3.17 C373210468
Counter Name
Number of Successful E-RAB(QCI7) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI7
Counter Description
Each QCI7 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI7 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-406
2.5.3.18 C373210469
Counter Name
Number of Successful E-RAB(QCI8) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI8
Counter Description
Each QCI8 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI8 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.19 C373210470
Counter Name
Number of Successful E-RAB(QCI9) HO Outgoing
Short Name
ERAB.HoOutSucc.QCI9
2-407
Counter Description
Each QCI9 E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete and the UE has QCI9 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete and
the UE has QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.20 C373210471
Counter Name
Number of Successful E-RAB HO Outgoing
Short Name
ERAB.HoOutSucc
Counter Description
Each E-RAB for successful handover outgoing is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB indicating
handover complete.
Refer to .
2-408
Update Description
The counter is incremented by 1 for every this E-RAB when the source eNodeB
receives the UEContextReleaseCommand message from the MME or receives the
UEContextRelease message from the target eNodeB indicating handover complete.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.21 C373210472
Counter Name
Number of E-RAB(QCI1) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI1
Counter Description
Each QCI1 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI1 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI1 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-409
Unit
unit
2.5.3.22 C373210473
Counter Name
Number of E-RAB(QCI2) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI2
Counter Description
Each QCI2 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI2 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI2 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.23 C373210474
Counter Name
Number of E-RAB(QCI3) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI3
2-410
Counter Description
Each QCI3 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI3 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI3 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.24 C373210475
Counter Name
Number of E-RAB(QCI4) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI4
Counter Description
Each QCI4 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI4 E-RAB.
Refer to .
2-411
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI4 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.25 C373210476
Counter Name
Number of E-RAB(QCI5) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI5
Counter Description
Each QCI5 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI5 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI5 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-412
Unit
unit
2.5.3.26 C373210477
Counter Name
Number of E-RAB(QCI6) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI6
Counter Description
Each QCI6 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI6 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI6 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.27 C373210478
Counter Name
Number of E-RAB(QCI7) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI7
2-413
Counter Description
Each QCI7 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI7 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI7 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.28 C373210479
Counter Name
Number of E-RAB(QCI8) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI8
Counter Description
Each QCI8 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI8 E-RAB.
Refer to .
2-414
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI8 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.29 C373210480
Counter Name
Number of E-RAB(QCI9) HO Incoming Admission Request
Short Name
ERAB.HoInAdReq.QCI9
Counter Description
Each QCI9 E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI9 E-RAB.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB and in which IE
E-RABs To Be Setup List includes QCI9 E-RAB.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-415
Unit
unit
2.5.3.30 C373210481
Counter Name
Number of E-RAB HO Incoming Admission Request
Short Name
ERAB.HoInAdReq
Counter Description
Each E-RAB for attempted handover incoming is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 for every E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.31 C373210482
Counter Name
Number of E-RAB(QCI1) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI1
2-416
Counter Description
Each QCI1 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI1 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI1
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.32 C373210483
Counter Name
Number of E-RAB(QCI2) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI2
Counter Description
Each QCI2 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI2 E-RAB admission failure.
Refer to .
2-417
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI2
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.33 C373210484
Counter Name
Number of E-RAB(QCI3) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI3
Counter Description
Each QCI3 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI3 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI3
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-418
Unit
unit
2.5.3.34 C373210485
Counter Name
Number of E-RAB(QCI4) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI4
Counter Description
Each QCI4 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI4 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI4
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.35 C373210486
Counter Name
Number of E-RAB(QCI5) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI5
2-419
Counter Description
Each QCI5 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI5 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI5
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.36 C373210487
Counter Name
Number of E-RAB(QCI6) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI6
Counter Description
Each QCI6 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI6 E-RAB admission failure.
Refer to .
2-420
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI6
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.37 C373210488
Counter Name
Number of E-RAB(QCI7) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI7
Counter Description
Each QCI7 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI7 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI7
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-421
Unit
unit
2.5.3.38 C373210489
Counter Name
Number of E-RAB(QCI8) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI8
Counter Description
Each QCI8 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI8 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI8
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.39 C373210490
Counter Name
Number of E-RAB(QCI9) HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail.QCI9
2-422
Counter Description
Each QCI9 E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI9 E-RAB admission failure.
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs QCI9
E-RAB admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.40 C373210491
Counter Name
Number of HO Incoming Admission Fail
Short Name
ERAB.HoInAdFail
Counter Description
Each E-RAB for handover admission failures is added to the counter.
Triggering Point
When the target eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs E-RAB admission failure.
Refer to .
2-423
Update Description
The counter is incremented by 1 for every this E-RAB When the target eNodeB receives
HANDOVER REQUEST message from the MME or source eNodeB then occurs E-RAB
admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.41 C373546248
Counter Name
Number of Successful E-RAB(QCI1) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI1 E-RAB for successful handover incoming is added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI1 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI1 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
2-424
Unit
unit
2.5.3.42 C373546249
Counter Name
Number of Successful E-RAB(QCI2) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI2 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI2 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI2 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.43 C373546250
Counter Name
Number of Successful E-RAB(QCI3) Incoming in RRC Re-Establishment
2-425
Short Name
-
Counter Description
Each QCI3 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI3 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI3 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.44 C373546251
Counter Name
Number of Successful E-RAB(QCI4) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI4 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
2-426
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI4 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI4 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.45 C373546252
Counter Name
Number of Successful E-RAB(QCI5) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI5 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI5 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI5 E-RAB
2-427
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.46 C373546253
Counter Name
Number of Successful E-RAB(QCI6) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI6 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI6 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI6 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-428
2.5.3.47 C373546254
Counter Name
Number of Successful E-RAB(QCI7) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI7 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI7 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI7 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.48 C373546255
Counter Name
Number of Successful E-RAB(QCI8) Incoming in RRC Re-Establishment
Short Name
-
2-429
Counter Description
Each QCI8 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI8 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI8 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.49 C373546256
Counter Name
Number of Successful E-RAB(QCI9) Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI9 E-RAB for successful incoming re-establishment from other cell to local cell is
added to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell and the UE has QCI9 E-RAB
Refer to .
2-430
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell and the UE
has QCI9 E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.50 C373546257
Counter Name
Number of Successful E-RAB Incoming in RRC Re-Establishment
Short Name
-
Counter Description
Each E-RAB for successful incoming re-establishment from other cell to local cell is added
to the counter.
Triggering Point
When the local cell receives the RRC CONNECTION REESTABLISHMENT COMPLETE
from the UE in other cell
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell receives the RRC
CONNECTION REESTABLISHMENT COMPLETE from the UE in other cell
Counter Type
Accumulated value
Sampling Period
Event triggered
2-431
Unit
unit
2.5.3.51 C373546258
Counter Name
Number of Successful E-RAB(QCI1) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI1 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI1 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI1
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.52 C373546259
Counter Name
Number of Successful E-RAB(QCI2) Outgoing in RRC Re-Establishment
2-432
Short Name
-
Counter Description
Each QCI2 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI2 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI2
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.53 C373546260
Counter Name
Number of Successful E-RAB(QCI3) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI3 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
2-433
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI3 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI3
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.54 C373546261
Counter Name
Number of Successful E-RAB(QCI4) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI4 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI4 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI4
E-RAB
2-434
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.55 C373546262
Counter Name
Number of Successful E-RAB(QCI5) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI5 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI5 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI5
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-435
2.5.3.56 C373546263
Counter Name
Number of Successful E-RAB(QCI6) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI6 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI6 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI6
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.57 C373546264
Counter Name
Number of Successful E-RAB(QCI7) Outgoing in RRC Re-Establishment
Short Name
-
2-436
Counter Description
Each QCI7 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI7 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI7
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.58 C373546265
Counter Name
Number of Successful E-RAB(QCI8) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI8 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI8 E-RAB
Refer to .
2-437
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI8
E-RAB
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.5.3.59 C373546266
Counter Name
Number of Successful E-RAB(QCI9) Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each QCI9 E-RAB for successful outgoing re-establishment from local cell to other cell is
added to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell and the UE has QCI9 E-RAB
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell and the UE has QCI9
E-RAB
Counter Type
Accumulated value
2-438
Sampling Period
Event triggered
Unit
unit
2.5.3.60 C373546267
Counter Name
Number of Successful E-RAB Outgoing in RRC Re-Establishment
Short Name
-
Counter Description
Each E-RAB for successful outgoing re-establishment from local cell to other cell is added
to the counter.
Triggering Point
When the local cell trigger the UE release for RRC CONNECTION REESTABLISHMENT
to other cell
Refer to .
Update Description
The counter is incremented by 1 for every this E-RAB when the local cell trigger the UE
release for RRC CONNECTION REESTABLISHMENT to other cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-439
2-440
Counter Name
DL UE InSession Active Time
Short Name
ERAB.SessionTimeUEDL
Counter Description
Downlink UE "In Session" means that downlink data is transmitted on any service bearer
of a UE during a sampling period. "In Session" time refers to the sum of UE sampling time
that meets the above condition.
2-441
Triggering Point
When the eNodeB detects that downlink UE data is transmitted during a sampling period,
this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink UE data is transmitted during a sampling period,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.2 C373210543
Counter Name
UL UE InSession Active Time
Short Name
ERAB.SessionTimeUEUL
Counter Description
Uplink UE "In Session" means that uplink data is transmitted on any service bearer of a
UE during a sampling period. "In Session" time refers to the sum of UE sampling time that
meets the above condition.
Triggering Point
When the eNodeB detects that uplink UE data is transmitted during a sampling period, this
counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink UE data is transmitted during a sampling period, this
counter is incremented by one.
2-442
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.3 C373210544
Counter Name
DL QCI1 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI1
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI1 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI1 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI1 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2-443
2.6.3.4 C373210545
Counter Name
DL QCI2 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI2
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI2 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI2 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI2 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.5 C373210546
Counter Name
DL QCI3 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI3
2-444
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI3 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI3 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI3 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.6 C373210547
Counter Name
DL QCI4 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI4
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI4 E-RABs.
2-445
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI4 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI4 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.7 C373210548
Counter Name
DL QCI5 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI5
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI5 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI5 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI5 E-RABs
during a sampling period, this counter is incremented by one.
2-446
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.8 C373210549
Counter Name
DL QCI6 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI6
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI6 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI6 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI6 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2-447
2.6.3.9 C373210550
Counter Name
DL QCI7 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI7
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI7 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI7 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI7 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.10 C373210551
Counter Name
DL QCI8 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI8
2-448
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI8 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI8 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI8 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.11 C373210552
Counter Name
DL QCI9 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL.QCI9
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
E-RABs.
2-449
Triggering Point
When the eNodeB detects that data is transmitted on downlink QCI9 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink QCI9 E-RABs
during a sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.12 C373210553
Counter Name
DL E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIDL
Counter Description
Downlink E-RAB "In Session" means that data is transmitted on downlink service E-RABs
during a sampling period. "In Session" time refers to the sum of E-RAB sampling time that
meets the above condition. This counter counts the number of In Session units of downlink
QCI9 E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on downlink E-RABs during a sampling
period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that downlink data is transmitted on downlink E-RABs during a
sampling period, this counter is incremented by one.
2-450
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.13 C373210554
Counter Name
UL QCI1 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI1
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI1
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI1 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI1 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2-451
2.6.3.14 C373210555
Counter Name
UL QCI2 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI2
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI2
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI2 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI2 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.15 C373210556
Counter Name
UL QCI3 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI3
2-452
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI3
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI3 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI3 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.16 C373210557
Counter Name
UL QCI4 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI4
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI4
E-RABs.
2-453
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI4 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI4 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.17 C373210558
Counter Name
UL QCI5 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI5
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI5
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI5 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI5 E-RABs during a
sampling period, this counter is incremented by one.
2-454
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.18 C373210559
Counter Name
UL QCI6 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI6
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI6
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI6 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI6 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2-455
2.6.3.19 C373210560
Counter Name
UL QCI7 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI7
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI7
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI7 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI7 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.20 C373210561
Counter Name
UL QCI8 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI8
2-456
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI8
E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI8 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI8 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.21 C373210562
Counter Name
UL QCI9 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL.QCI9
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink QCI9
E-RABs.
2-457
Triggering Point
When the eNodeB detects that data is transmitted on uplink E-RABs during a sampling
period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink QCI9 E-RABs during a
sampling period, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.22 C373210563
Counter Name
UL E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCIUL
Counter Description
Uplink E-RAB "In Session" means that data is transmitted on uplink service E-RABs during
a sampling period. "In Session" time refers to the sum of E-RAB sampling time that meets
the above condition. This counter counts the number of In Session units of uplink E-RABs.
Triggering Point
When the eNodeB detects that data is transmitted on uplink QCI9 E-RABs during a
sampling period, this counter is updated.
Refer to .
Update Description
When the eNodeB detects that uplink data is transmitted on uplink E-RABs during a
sampling period, this counter is incremented by one.
2-458
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.23 C373505300
Counter Name
Number of Abnormal Release Active E-RAB(QCI=1)
Short Name
ERAB.RelActNbr.QCI1
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI1 E-RAB is added to the
counter.
Triggering Point
When a QCI1 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI1 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-459
2.6.3.24 C373505301
Counter Name
Number of Abnormal Release Active E-RAB(QCI=2)
Short Name
ERAB.RelActNbr.QCI2
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI2 E-RAB is added to the
counter.
Triggering Point
When a QCI2 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI2 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.6.3.25 C373505302
Counter Name
Number of Abnormal Release Active E-RAB(QCI=3)
Short Name
ERAB.RelActNbr.QCI3
2-460
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI3 E-RAB is added to the
counter.
Triggering Point
When a QCI3 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI3 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.6.3.26 C373505303
Counter Name
Number of Abnormal Release Active E-RAB(QCI=4)
Short Name
ERAB.RelActNbr.QCI4
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI4 E-RAB is added to the
counter.
Triggering Point
When a QCI4 E-RAB with data in a buffer that was abnormally released.
Refer to .
2-461
Update Description
The counter is incremented by 1 when a QCI4 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.6.3.27 C373505304
Counter Name
Number of Abnormal Release Active E-RAB(QCI=5)
Short Name
ERAB.RelActNbr.QCI5
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI5 E-RAB is added to the
counter.
Triggering Point
When a QCI5 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI5 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-462
Unit
unit
2.6.3.28 C373505305
Counter Name
Number of Abnormal Release Active E-RAB(QCI=6)
Short Name
ERAB.RelActNbr.QCI6
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI6 E-RAB is added to the
counter.
Triggering Point
When a QCI6 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI6 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.6.3.29 C373505306
Counter Name
Number of Abnormal Release Active E-RAB(QCI=7)
Short Name
ERAB.RelActNbr.QCI7
2-463
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI7 E-RAB is added to the
counter.
Triggering Point
When a QCI7 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI7 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.6.3.30 C373505307
Counter Name
Number of Abnormal Release Active E-RAB(QCI=8)
Short Name
ERAB.RelActNbr.QCI8
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI8 E-RAB is added to the
counter.
Triggering Point
When a QCI8 E-RAB with data in a buffer that was abnormally released.
Refer to .
2-464
Update Description
The counter is incremented by 1 when a QCI8 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2.6.3.31 C373505308
Counter Name
Number of Abnormal Release Active E-RAB(QCI=9)
Short Name
ERAB.RelActNbr.QCI9
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each QCI9 E-RAB is added to the
counter.
Triggering Point
When a QCI9 E-RAB with data in a buffer that was abnormally released.
Refer to .
Update Description
The counter is incremented by 1 when a QCI9 E-RAB with data in a buffer that was
abnormally released.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-465
Unit
unit
2.6.3.32 C373505402
Counter Name
UE InSession Active Time
Short Name
ERAB.SessionTimeUE
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
UE. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data Radio
Bearer (UL or DL) has been transferred during the last 100 ms for that QCI.
Triggering Point
When UE data on any Data Radio Bearer (UL or DL) has been transferred during each
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when UE data on any Data Radio Bearer (UL or DL) has
been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.33 C373505403
Counter Name
QCI1 E-RABs InSession Active Time
2-466
Short Name
ERAB.SessionTimeQCI.QCI1
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI1.
Triggering Point
When QCI1 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI1 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.34 C373505404
Counter Name
QCI2 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI2
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI2.
2-467
Triggering Point
When QCI2 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI2 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.35 C373505405
Counter Name
QCI3 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI3
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI3.
Triggering Point
When QCI3 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI3 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
2-468
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.36 C373505406
Counter Name
QCI4 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI4
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI4.
Triggering Point
When QCI4 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI4 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2-469
2.6.3.37 C373505407
Counter Name
QCI5 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI5
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI5.
Triggering Point
When QCI5 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI5 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.38 C373505408
Counter Name
QCI6 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI6
2-470
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI6.
Triggering Point
When QCI6 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI6 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.39 C373505409
Counter Name
QCI7 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI7
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI7.
Triggering Point
When QCI7 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
2-471
Update Description
The counter is incremented by 1 when QCI7 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.40 C373505410
Counter Name
QCI8 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI8
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI8.
Triggering Point
When QCI8 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI8 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
2-472
Unit
unit
2.6.3.41 C373505411
Counter Name
QCI9 E-RABs InSession Active Time
Short Name
ERAB.SessionTimeQCI.QCI9
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms for QCI9.
Triggering Point
When QCI9 E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at
sampling point.
Refer to .
Update Description
The counter is incremented by 1 when QCI9 data on any Data Radio Bearer (UL or DL)
has been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.42 C373505498
Counter Name
E-RABs InSession Active Time
2-473
Short Name
ERAB.SessionTimeQCI
Counter Description
The counter is used to count number of session seconds aggregated for E-RABs with a
certain QCI. The E-RABs for a UE is said to be "in session" if any E-RAB data on any Data
Radio Bearer (UL or DL) has been transferred during the last 100 ms.
Triggering Point
When E-RAB data on any Data Radio Bearer (UL or DL) has been transferred at sampling
point.
Refer to .
Update Description
The counter is incremented by 1 when UE data on any Data Radio Bearer (UL or DL) has
been transferred at sampling point.
Counter Type
Accumulated value
Sampling Period
100 ms
Unit
unit
2.6.3.43 C373505499
Counter Name
Number of Abnormal Release Active E-RAB
Short Name
ERAB.RelActNbr
Counter Description
The abnormally released E-RABs that were active at the time of release. i.e.when there
was user data in the queue in any of the directions. Each E-RAB is added to the counter.
Triggering Point
When a E-RAB with data in a buffer that was abnormally released.
2-474
Refer to .
Update Description
The counter is incremented by 1 when a E-RAB with data in a buffer that was abnormally
released.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
2-475
Counter Name
Average E-RAB Number (QCI=1)
Short Name
ERAB.UsageNbrMean.QCI1
Counter Description
When the eNodeB has an QCI1 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an QCI1 E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
2-476
Triggering Point
When the eNodeB has an QCI1 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI1 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.2 C373240801
Counter Name
Average E-RAB Number (QCI=2)
Short Name
ERAB.UsageNbrMean.QCI2
Counter Description
When the eNodeB has an QCI2 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an QCI2 E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI2 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI2 E-RAB number among sampling
points.
2-477
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.3 C373240802
Counter Name
Average E-RAB Number (QCI=3)
Short Name
ERAB.UsageNbrMean.QCI3
Counter Description
When the eNodeB has an QCI3 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an QCI3 E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI3 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI3 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2-478
2.7.3.4 C373240803
Counter Name
Average E-RAB Number (QCI=4)
Short Name
ERAB.UsageNbrMean.QCI4
Counter Description
When the eNodeB has an QCI4 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an QCI4 E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI4 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI4 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.5 C373240804
Counter Name
Average E-RAB Number (QCI=5)
Short Name
ERAB.UsageNbrMean.QCI5
2-479
Counter Description
When the eNodeB has an QCI5 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an QCI5 E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI5 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI5 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.6 C373240805
Counter Name
Average E-RAB Number (QCI=6)
Short Name
ERAB.UsageNbrMean.QCI6
Counter Description
When the eNodeB has an QCI6 E-RAB successfully established, the
2-480
Triggering Point
When the eNodeB has an QCI6 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI6 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.7 C373240806
Counter Name
Average E-RAB Number (QCI=7)
Short Name
ERAB.UsageNbrMean.QCI7
Counter Description
When the eNodeB has an QCI7 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has an QCI7 E-RAB
successfully released by MME or eNodeB, the counter of E-RAB number is decreased by
1.
Triggering Point
When the eNodeB has an QCI7 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI7 E-RAB number among sampling
points.
2-481
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.8 C373240807
Counter Name
Average E-RAB Number (QCI=8)
Short Name
ERAB.UsageNbrMean.QCI8
Counter Description
When the eNodeB has an QCI8 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has an QCI8 E-RAB
successfully released by MME or eNodeB, the counter of E-RAB number is decreased by
1.
Triggering Point
When the eNodeB has an QCI8 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI8 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2-482
2.7.3.9 C373240808
Counter Name
Average E-RAB Number (QCI=9)
Short Name
ERAB.UsageNbrMean.QCI9
Counter Description
When the eNodeB has an QCI9 E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an QCI9 E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI9 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the arithmetic mean of QCI9 E-RAB number among sampling
points.
Counter Type
Average value
Sampling Period
2s
Unit
unit
2.7.3.10 C373240809
Counter Name
Online E-RAB Number (QCI=1)
Short Name
ERAB.UsageNbrOnline.QCI1
2-483
Counter Description
When the eNodeB has an E-RAB successfully established, the
counter of E-RAB number is increased by 1. When the eNodeB has
an E-RAB successfully released by MME or eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI1 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI1 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.11 C373240810
Counter Name
Online E-RAB Number (QCI=2)
Short Name
ERAB.UsageNbrOnline.QCI2
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI2 E-RAB successfully established or released.
Refer to .
2-484
Update Description
The counter is updated by the current QCI2 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.12 C373240811
Counter Name
Online E-RAB Number (QCI=3)
Short Name
ERAB.UsageNbrOnline.QCI3
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI3 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI3 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
2-485
Unit
unit
2.7.3.13 C373240812
Counter Name
Online E-RAB Number (QCI=4)
Short Name
ERAB.UsageNbrOnline.QCI4
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of
E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI4 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI4 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.14 C373240813
Counter Name
Online E-RAB Number (QCI=5)
Short Name
ERAB.UsageNbrOnline.QCI5
2-486
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI5 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI5 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.15 C373240814
Counter Name
Online E-RAB Number (QCI=6)
Short Name
ERAB.UsageNbrOnline.QCI6
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI6 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI6 E-RAB number at sampling points.
2-487
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.16 C373240815
Counter Name
Online E-RAB Number (QCI=7)
Short Name
ERAB.UsageNbrOnline.QCI7
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI7 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI7 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2-488
2.7.3.17 C373240816
Counter Name
Online E-RAB Number (QCI=8)
Short Name
ERAB.UsageNbrOnline.QCI8
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI8 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI8 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.18 C373240817
Counter Name
Online E-RAB Number (QCI=9)
Short Name
ERAB.UsageNbrOnline.QCI9
2-489
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI9 E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current QCI9 E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.19 C373240818
Counter Name
Maximum E-RAB Number (QCI=1)
Short Name
ERAB.UsageNbrMax.QCI1
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI1 E-RAB successfully established or released.
Refer to .
2-490
Update Description
The counter is replaced with the current value when the QCI1 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.20 C373240819
Counter Name
Maximum E-RAB Number (QCI=2)
Short Name
ERAB.UsageNbrMax.QCI2
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI2 E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the QCI2 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
2-491
Unit
unit
2.7.3.21 C373240820
Counter Name
Maximum E-RAB Number (QCI=3)
Short Name
ERAB.UsageNbrMax.QCI3
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI3 E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the QCI3 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.22 C373240821
Counter Name
Maximum E-RAB Number (QCI=4)
Short Name
ERAB.UsageNbrMax.QCI4
2-492
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI4 E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the QCI4 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.23 C373240822
Counter Name
Maximum E-RAB Number (QCI=5)
Short Name
ERAB.UsageNbrMax.QCI5
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI5 E-RAB successfully established or released.
Refer to .
2-493
Update Description
The counter is replaced with the current value when the QCI5 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.24 C373240823
Counter Name
Maximum E-RAB Number (QCI=6)
Short Name
ERAB.UsageNbrMax.QCI6
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI6 E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the QCI6 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
2-494
Unit
unit
2.7.3.25 C373240824
Counter Name
Maximum E-RAB Number (QCI=7)
Short Name
ERAB.UsageNbrMax.QCI7
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI7 E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the QCI7 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.26 C373240825
Counter Name
Maximum E-RAB Number (QCI=8)
Short Name
ERAB.UsageNbrMax.QCI8
2-495
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI8 E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the QCI8 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.27 C373240826
Counter Name
Maximum E-RAB Number (QCI=9)
Short Name
ERAB.UsageNbrMax.QCI9
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an QCI9 E-RAB successfully established or released.
Refer to .
2-496
Update Description
The counter is replaced with the current value when the QCI9 E-RAB number in sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2.7.3.28 C373240827
Counter Name
Average E-RAB Number
Short Name
ERAB.UsageNbrMean
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by arithmetic mean of the E-RAB number among sampling points.
Counter Type
Average value
Sampling Period
2s
2-497
Unit
unit
2.7.3.29 C373240828
Counter Name
Online E-RAB Number
Short Name
ERAB.UsageNbrOnline
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an E-RAB successfully established or released.
Refer to .
Update Description
The counter is updated by the current E-RAB number at sampling points.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
2.7.3.30 C373240829
Counter Name
Maximum E-RAB Number
Short Name
ERAB.UsageNbrMax
2-498
Counter Description
When the eNodeB has an E-RAB successfully established, the counter of E-RAB number
is increased by 1. When the eNodeB has an E-RAB successfully released by MME or
eNodeB, the counter of E-RAB number is decreased by 1.
Triggering Point
When the eNodeB has an E-RAB successfully established or released.
Refer to .
Update Description
The counter is replaced with the current value when the E-RAB number at sampling point
is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
2-499
l Sampling Point 1: The eNodeB records the start time when it receives the
InitialContextSetupRequest message from MME.
l Sampling Point 2: The eNodeB records the end time when it sends the InitialContext-
SetupResponse message to MME.
l Sampling Point 3: The eNodeB records the start time when it receives the
ERABSetupRequest message from MME.
2-500
l Sampling Point 4: The eNodeB records the end time when it sends the
ERABSetupResponse message to MME.
2-501
Counter Name
Sum Time of QCI1 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI1
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by the sum of QCI1 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.2 C373505328
Counter Name
Sum Time of QCI2 E-RAB Setup
2-502
Short Name
ERAB.EstabTimeSum.QCI2
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by the sum of QCI2 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.3 C373505329
Counter Name
Sum Time of QCI3 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI3
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
2-503
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI3
E-RABs in the granularity period to give the arithmetic mean.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by the sum of QCI3 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.4 C373505330
Counter Name
Sum Time of QCI4 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI4
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI4
E-RABs in the granularity period to give the arithmetic mean.
2-504
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by the sum of QCI4 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.5 C373505331
Counter Name
Sum Time of QCI5 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI5
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI5
E-RABs in the granularity period to give the arithmetic mean.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
2-505
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by the sum of QCI5 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.6 C373505332
Counter Name
Sum Time of QCI6 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI6
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI6
E-RABs in the granularity period to give the arithmetic mean.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
2-506
Update Description
The counter is updated by the sum of QCI6 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.7 C373505333
Counter Name
Sum Time of QCI7 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI7
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI7
E-RABs in the granularity period to give the arithmetic mean.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Update Description
The counter is updated by the sum of QCI7 E-RAB setup time among sampling points.
2-507
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.8 C373505334
Counter Name
Sum Time of QCI8 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI8
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI8
E-RABs in the granularity period to give the arithmetic mean.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Update Description
The counter is updated by the sum of QCI8 E-RAB setup time among sampling points.
Counter Type
Accumulated value
2-508
Sampling Period
Event triggered
Unit
ms
2.8.3.9 C373505335
Counter Name
Sum Time of QCI9 E-RAB Setup
Short Name
ERAB.EstabTimeSum.QCI9
Counter Description
The sum E-RAB setup time is the time intervals for every successfully established
E-RAB between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT
SETUP REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. The
end value of this time will then be divided by the number of successfully established QCI9
E-RABs in the granularity period to give the arithmetic mean.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by the sum of QCI9 E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
2-509
Unit
ms
2.8.3.10 C373505336
Counter Name
Maximum Time of QCI1 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI1
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI1 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI1 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2-510
2.8.3.11 C373505337
Counter Name
Maximum Time of QCI2 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI2
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI2 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI2 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.12 C373505338
Counter Name
Maximum Time of QCI3 E-RAB Setup
2-511
Short Name
ERAB.EstabTimeMax.QCI3
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI3 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI3 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.13 C373505339
Counter Name
Maximum Time of QCI4 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI4
2-512
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI4 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI4 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.14 C373505340
Counter Name
Maximum Time of QCI5 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI5
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
2-513
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI5 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.15 C373505341
Counter Name
Maximum Time of QCI6 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI6
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI6 E-RAB in the granularity period.
2-514
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI6 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.16 C373505342
Counter Name
Maximum Time of QCI7 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI7
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI7 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
2-515
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when QCI7 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.17 C373505343
Counter Name
Maximum Time of QCI8 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI8
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI8 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
2-516
Update Description
The counter is replaced with the current value when QCI8 ERAB setup time at sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.18 C373505344
Counter Name
Maximum Time of QCI9 E-RAB Setup
Short Name
ERAB.EstabTimeMax.QCI9
Counter Description
The E-RAB setup time is the time intervals for every successfully established E-RAB
between the receipt of an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP
REQUEST message and the transmission of the corresponding E-RAB SETUP
RESPONSE or INITIAL CONTEXT SETUP RESPONSE message by the eNodeB. the
counter is the largest about QCI9 E-RAB in the granularity period.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time
intervals from the INITIAL CONTEXT SETUP REQUEST message to the INITIAL
CONTEXT SETUP RESPONSE message,or from the E-RAB SETUP REQUEST
message to the E-RAB SETUP RESPONSE message.
Update Description
The counter is replaced with the current value when QCI9 ERAB setup time at sampling
point is larger than the counter.
2-517
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.19 C373505448
Counter Name
Sum Time of Initial E-RAB Setup
Short Name
-
Counter Description
The sum time intervals for every successfully established E-RAB between the receipt
of an INITIAL CONTEXT SETUP REQUEST message and the transmission of the
corresponding INITIAL CONTEXT SETUP RESPONSE message by the eNodeB.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message, eNodeB count
the time intervals from the INITIAL CONTEXT SETUP
REQUEST message to the INITIAL CONTEXT SETUP RESPONSE message
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is updated by taking the sum of E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2-518
2.8.3.20 C373505449
Counter Name
Max Time of Initial E-RAB Setup
Short Name
-
Counter Description
The time intervals for every successfully established E-RAB between the receipt
of an INITIAL CONTEXT SETUP REQUEST message and the transmission of the
corresponding INITIAL CONTEXT SETUP RESPONSE message by the eNodeB.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message, eNodeB count
the time intervals from the INITIAL CONTEXT SETUP
REQUEST message to the INITIAL CONTEXT SETUP RESPONSE message
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is replaced with the new value when the E-RAB setup time in a sampling point
is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2.8.3.21 C373505450
Counter Name
Sum Time of E-RAB Setup
Short Name
ERAB.EstabTimeSum
2-519
Counter Description
The sum time intervals for every successfully established E-RAB between the receipt of
an E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP REQUEST message and
the transmission of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB.
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time intervals from the INITIAL
CONTEXT SETUP
REQUEST message to the INITIAL CONTEXT SETUP RESPONSE message,or from the
E-RAB SETUP REQUEST message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by taking the sum of E-RAB setup time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
2.8.3.22 C373505451
Counter Name
Maximum Time of E-RAB Setup
Short Name
ERAB.EstabTimeMax
Counter Description
The time intervals for every successfully established E-RAB between the receipt of an
E-RAB SETUP REQUEST or INITIAL CONTEXT SETUP REQUEST message and the
transmission of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB.
2-520
Triggering Point
When eNodeB send the INITIAL CONTEXT SETUP RESPONSE message or E-RAB
SETUP RESPONSE to MME, eNodeB count the time intervals from the INITIAL
CONTEXT SETUP
REQUEST message to the INITIAL CONTEXT SETUP RESPONSE message,or from the
E-RAB SETUP REQUEST message to the E-RAB SETUP RESPONSE message.
Refer to Sampling Point 1, Sampling Point 2, Sampling Point 3, Sampling Point 4.
Update Description
The counter is replaced with the current value when the E-RAB setup time in a sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
ms
2-521
2-522
3-1
l Sampling Point 1: The EUTRAN receives the INITIAL CONTEXT SETUP REQUEST
message from the MME.
l Sampling Point 2: The EUTRAN sends the RRC CONNECTION
RECONFIGURATION message to the UE.
l Sampling Point 3: The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
l Sampling Point 4: The EUTRAN sends the INITIAL CONTEXT SETUP RESPONSE
message to the MME, indicating that the E-RAB Establishment has been set up
successfully.
l Sampling Point 5: The EUTRAN does not receive the
RRCConnectionReconfigurationComplete message from the UE, and the timer
3-2
expires. Then EUTRAN sends the INITIAL CONTEXT SETUP FAILURE message
to the MME.
l Sampling Point 6: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of not UE context.
l Sampling Point 7: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of AS failure.
l Sampling Point 8: The EUTRAN receives the RRC CONNECTION
REESTABLISHMENT REQUEST message from the UE.
2 C373220601 Number of Context Setup Failure due to Active Failure in Security Mode
6 C373220605 Number of Context Setup Failure due to Context Setup Request Msg Error
8 C373220623 Number of Context Setup Failure due to Message not Compatible with
eNodeb State
Counter Name
Number of Successful Context Setup
Short Name
UECNTX.SetupSucc
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and replies
the INITIAL CONTEXT SETUP RESPONSE message after successful admission, RRC
connection reconfiguration, UE ability and security mode procedure.
3-3
Triggering Point
When the eNodeB sends the INITIAL CONTEXT SETUP RESPONSE message to the
MME
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB sends the INITIAL CONTEXT SETUP
RESPONSE message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.2 C373220601
Counter Name
Number of Context Setup Failure due to Active Failure in Security Mode
Short Name
UECNTX.SetupFail.SecuFail
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and replies
the INITIAL CONTEXT SETUP failure message after security mode procedure failure.
Triggering Point
When the eNodeB send the InitialContextSetupfailure to the MME due to security mode
failures
Update Description
The counter is incremented by 1 when the eNodeB sends the InitialContextSetupfailure
message to the MME due to security mode failures.
3-4
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.3 C373220602
Counter Name
Number of Context Setup Failure due to Admission Control Failure
Short Name
UECNTX.SetupFail.AdFail
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and replies
the INITIAL CONTEXT SETUP failure message after admission procedure failure.
Triggering Point
When the eNodeB send the InitialContextSetupfailure message to the MME due to
admission failures
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB sends the InitialContextSetupfailure
message to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-5
3.1.3.4 C373220603
Counter Name
Number of Context Setup Failure due to Uu interface Failure
Short Name
UECNTX.SetupFail.RrcTimeOut
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and replies
the INITIAL CONTEXT SETUP failure message after RRC connection reconfiguration
procedure failure for timeout.
Triggering Point
When the eNodeB send the InitialContextSetupfailure message to the MME due to RRC
reconfiguration complete timeout.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB sends the InitialContextSetupfailure
message to the MME due to RRC reconfiguration complete timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.5 C373220604
Counter Name
Number of Context Setup Failure due to UE Reestablish RRC Connection
Short Name
UECNTX.SetupFail.UeReFail
3-6
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and
replies INITIAL CONTEXT SETUP failure message after receiving RRC connection
reestablishment message.
Triggering Point
When the eNodeB send the InitialContextSetupfailure message to the MME due to
receiving the RRC connection re-establishment message.
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 when the eNodeB sends the InitialContextSetupfailure
message to the MME due to RRC re-establishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.6 C373220605
Counter Name
Number of Context Setup Failure due to Context Setup Request Msg Error
Short Name
UECNTX.SetupFail.MsgErr
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and replies
INITIAL CONTEXT SETUP failure message after detecting parameter failure.
Triggering Point
When the eNodeB send the InitialContextSetupfailure message to the MME due to
message parameter error.
3-7
Update Description
The counter is incremented by 1 when the eNodeB sends the InitialContextSetupfailure
message to the MME due to message parameter error.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.7 C373220606
Counter Name
Number of Context Setup Failure due to Other Cause
Short Name
UECNTX.SetupFail.OtherCause
Counter Description
The eNodeB receives the InitialContextSetupRequest message from the MME and replies
the INITIAL CONTEXT SETUP failure message for some eNodeB internal errors.
Triggering Point
When the eNodeB send the InitialContextSetupfailure to the MME due to other reason.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB sends the InitialContextSetupfailure
message to the MME due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
3-8
Unit
times
3.1.3.8 C373220623
Counter Name
Number of Context Setup Failure due to Message not Compatible with eNodeb State
Short Name
UECNTX.SetupFail.StateNotCompa
Counter Description
The eNodeB's state is not the UE context setup when receiving the INITIAL CONTEXT
SETUP REQUEST message from the MME.Then the eNodeB reply the INITIAL CONTEXT
SETUP failure message to the MME.
Triggering Point
When the eNodeB sends the INITIAL CONTEXT SETUP failure message due to message
not compatible with receiver state
Update Description
The counter is incremented by 1 when the eNodeB sends the INITIAL CONTEXT SETUP
failure message due to message not compatible with receiver state.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.9 C373220636
Counter Name
Number of Attempted Context Setup
3-9
Short Name
UECNTX.SetupReq
Counter Description
On receipt by the eNodeB of an InitialContextSetupRequest message from MME, each
InitialContextSetupRequest message received is added to the counter.
Triggering Point
When the eNodeB receives the InitialContextSetupRequest message from the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
InitialContextSetupRequest message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.1.3.10 C373220656
Counter Name
Number of Context Left
Short Name
UECNTX.LeftNum
Counter Description
This counter counts the number of existing UE contexts at the end of the last statistics
granularity, which is the beginning of this statistic granularity. It is used for calculating the
radio drop rate.
Triggering Point
This counter counts the number of existing UE contexts at the beginning of this statistics
granularity.
3-10
Update Description
This counter is updated to the latest reported sampling value.
Counter Type
Current value
Sampling Period
15 min
Unit
unit
3.2 Scell
3.2.1 Flow Charts and Sampling Points
No chart.
Counter Name
Number of Add Scell
Short Name
-
3-11
Counter Description
After the CA function is enabled, this counter indicates the number of Scells, which
are configured for a UE, added in the RRCConnectionReconfiguration message by the
eNodeB.
Triggering Point
This counter is incremented by one every time an Scell is added for a UE by the eNodeB
in the RRCConnectionReconfiguration message.
Refer to .
Update Description
When the eNodeB adds an Scell for a UE in the RRCConnectionReconfiguration message,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.2.3.2 C373220658
Counter Name
Number of Add Scell Succ
Short Name
-
Counter Description
After the CA function is enabled, this counter indicates the number of UEs configured
for every added Scell in the RRCConnectionReconfiguration message after the
RRCConnectionReconfigurationComplete message is received.
Triggering Point
This counter is incremented by one every time an Scell is added for a UE
by the eNodeB in the RRCConnectionReconfiguration message and the
RRCConnectionReconfigurationComplete message is received.
3-12
Refer to .
Update Description
After the eNodeB adds Scell for a UE in the RRCConnectionReconfiguration message,
when the RRCConnectionReconfigurationComplete message is received, this counter is
incremented by one every time an Scell is added.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.2.3.3 C373220659
Counter Name
Number of Delete Scell
Short Name
-
Counter Description
After the CA function is enabled, this counter indicates the number of UEs configured for
every Scell deleted in the RRCConnectionReconfiguration message by the eNodeB.
Triggering Point
This counter is incremented by one every time an Scell is deleted for a UE by the eNodeB
in the RRCConnectionReconfiguration message.
Refer to .
Update Description
When the eNodeB deletes Scell for a UE in the RRCConnectionReconfiguration message,
this counter is incremented by one every time an Scell is deleted.
Counter Type
Accumulated value
3-13
Sampling Period
Event triggered
Unit
times
3.2.3.4 C373220660
Counter Name
Number of Delete Scell Succ
Short Name
-
Counter Description
After the CA function is enabled, this counter indicates the number of UEs configured
for every deleted Scell in the RRCConnectionReconfiguration message after the
RRCConnectionReconfigurationComplete message is received.
Triggering Point
This counter is incremented by one every time an Scell is deleted for a UE
by the eNodeB in the RRCConnectionReconfiguration message and the
RRCConnectionReconfigurationComplete message is received. The handover source
side reports the Scell deletion success message after issuing the handover command,
and this counter is incremented by one every time an Scell is deleted.
Refer to .
Update Description
After the eNodeB deletes Scell for a UE in the RRCConnectionReconfiguration message,
when the RRCConnectionReconfigurationComplete message is received, this counter is
incremented by one every time an Scell is deleted. In addition, the handover source side
directly reports the Scell deletion success message after issuing the handover command,
and this counter is incremented by one every time an Scell is deleted.
Counter Type
Accumulated value
Sampling Period
Event triggered
3-14
Unit
times
3-15
Counter Name
Number of Successful Context Modify
Short Name
UECNTX.ModifySucc
Counter Description
The eNodeB receives the InitialContextModificationRequest message from the MME and
replies the INITIAL CONTEXT MODIFICATION RESPONSE message after successful
admission, RRC connection reconfiguration procedure.
Triggering Point
When the eNodeB sends the UE CONTEXT MODIFICATION RESPONSE message to the
MME
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB sends the INITIAL CONTEXT
MODIFICATION RESPONSE message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
3-16
Unit
times
3.3.3.2 C373220608
Counter Name
Number of Context Modify Failure due to ENB Admission Failure
Short Name
UECNTX.ModifyFail.AdFail
Counter Description
The eNodeB receives the InitialContextModificationRequest message from the MME
and replies the INITIAL CONTEXT MODIFICATION FAILURE message after admission
procedure failures.
Triggering Point
When the eNodeB sends the UE CONTEXT MODIFICATION failure message to the MME
due to admission failures
Update Description
The counter is incremented by 1 when the eNodeB sends the
InitialContextModificationfailure message to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.3.3.3 C373220609
Counter Name
Number of Context Modify Failure due to Msg Param Error
3-17
Short Name
UECNTX.ModifyFail.ParaErr
Counter Description
The eNodeB receives the InitialContextModificationRequest message from the MME
and replies the INITIAL CONTEXT MODIFICATION FAILURE message after detection
parameter failures.
Triggering Point
When the eNodeB sends the UE CONTEXT MODIFICATION failure message to the MME
due to message parameter error.
Update Description
The counter is incremented by 1 when the eNodeB sends the
UEContextModificationFailure message to the MME due to parameter error.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.3.3.4 C373220610
Counter Name
Number of Context Modify Failure due to Other Cause
Short Name
UECNTX.ModifyFail.OtherCause
Counter Description
The eNodeB receives the InitialContextModificationRequest message from the MME and
replies the INITIAL CONTEXT MODIFICATION FAILURE message for some eNodeB
internal errors.
3-18
Triggering Point
When the eNodeB sends the UE CONTEXT MODIFICATION failure message to the MME
due to other reason.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB sends the
UEContextModificationFailure message to the MME due other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.3.3.5 C373220632
Counter Name
Number of Context Modify Failure due to Waiting Reconfiguration Complete timeout
Short Name
UECNTX.ModifyFail.ReCfgFail
Counter Description
After the eNodeB receive the UE CONTEXT MODIFICATION REQUEST, sends the
RRCConnectionReconfiguration message to UE. When the timer of waiting for the
ReconfigurationComplete expires the eNodeb reply the UE CONTEXT MODIFICATION
failures to the MME.
Triggering Point
When the eNodeB sends the UEContextModificationFailure message to the MME due to
timeout of waiting for the RRCConnectionReconfiguration Complete message.
Refer to Sampling Point 3.
3-19
Update Description
The counter is incremented by 1 when the eNodeB sends the
UEContextModificationFailure message to the MME due to timeout of waiting for the
RRCConnectionReconfiguration Complete message.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.3.3.6 C373220633
Counter Name
Number of Attempted Context Modification
Short Name
UECNTX.ModifyReq
Counter Description
On receipt by the eNodeB of an UEContextModificationRequest message from MME, each
UEContextModificationRequest message received is added to the counter.
Triggering Point
When the eNodeB receives the UEContextModificationRequest message from the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextModificationRequest message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
3-20
Unit
times
3-21
4 C373220614 Number of Context Release by ENB due to Shut Down or Reset Cell
Counter Name
Number of Context Release by MME due to UE CONTEXT RELEASE COMMAND
3-22
Short Name
UEContext.RelSuccNbr
Counter Description
The eNodeB receives the UEContextReleaseCommand message from the MME, in which
the Cause is Normal Relase, Detach, Authentication failure or Interaction with other
procedure". The counter is used to count the number of UE Context Release initiated by
MME due to the above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Normal Relase, Detach, Authentication failure or
Interaction with other procedure.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB receives UEContextReleaseCommand
message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.2 C373220612
Counter Name
Number of Context Release by ENB due to Uu interface Failure
Short Name
UECNTX.RelReq.EnbUuFail
Counter Description
Case1: The eNodeB trigger UE release when timer of RRC reestablishment complete
expires during RRC reestablishment.
3-23
Case2: The eNodeB trigger UE release when RLC PDU gets maximum retransmition
number.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to radio link failures.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to radio link failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.3 C373220613
Counter Name
Number of Context Release by ENB due to Handover Failure
Short Name
UECNTX.RelReq.EnbHoFail
Counter Description
The eNodeB's timer of waiting for the UEContextReleaseCommand message expires
during handover, eNodeB will trigger UE release. The cause occurs the source cell.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to handover failures.
Refer to Sampling Point 1.
3-24
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to handover failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.4 C373220614
Counter Name
Number of Context Release by ENB due to Shut Down or Reset Cell
Short Name
UECNTX.RelReq.Reset
Counter Description
1 The eNodeB receives the Cell Block Command from the OMM for manual operation.
2 The eNodeB occurs alarm that trigger UE release.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to cell block or reset.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to cell reset or block.
Counter Type
Accumulated value
Sampling Period
Event triggered
3-25
Unit
times
3.4.3.5 C373220615
Counter Name
Number of Context Release by ENB due to Inactivity
Short Name
UECNTX.RelReq.Inactivity
Counter Description
In the condition of opening "USER INACTIVITY" switch,the eNodeB detects user that have
no DTCH data queued on the downlink and the uplink during configuration intervals. The
user is regarded as "inactivity".
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to user inactive.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to user inactivity.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.6 C373220616
Counter Name
Number of Context Release by ENB due to Other
3-26
Short Name
UECNTX.RelReq.EnbOther
Counter Description
The eNodeB detects some internal reasons that trigger UE release.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to other reason.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.7 C373220617
Counter Name
Number of Context Release by MME due to Error Indication or Reestablish inter eNB
Short Name
UECNTX.RelReq.ErrorInd
Counter Description
The counter is used to count the number of UE Context Release initiated by MME due to
the following two conditions.
3-27
Triggering Point
1 When the eNodeB receives the ErrorIndication message from the MME.
2 When the eNodeB receives the UEContextReleaseCommand message from the MME
and the Cause in the message is Failure in the Radio Interface Procedure.
Refer to Sampling Point 1, Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB receives the ErrorIndication message
or UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.8 C373220618
Counter Name
Number of Context Release by ENB due to Redirection
Short Name
UECNTX.RelReq.Redirection
Counter Description
The eNodeB concludes UE redirection to other cell or eNodeB, then trigger UE release.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to the UE redirection.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to UE redirection.
3-28
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.9 C373220620
Counter Name
Number of Context Release by ENB due to Re-estblishment Fail
Short Name
UECNTX.RelReq.ReestFail
Counter Description
The eNodeB will trigger UE release after sending the
RRCConnectionReestablishmentReject message to UE.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to RRC connection re-establishment failures.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to RRC connection re-establishment failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-29
3.4.3.10 C373220621
Counter Name
Number of Context Release by ENB due to S1 Link Fail
Short Name
UECNTX.RelReq.S1LinkFail
Counter Description
The counter includes the two following conditions.
1 The eNodeB detects the fiber fault then trigger UE release.
2 The eNodeB detects the GTPU path fault then trigger UE release.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to S1 link fault.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to S1 link fault.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.11 C373220622
Counter Name
Number of Context Release by ENB due to UE Not Online
Short Name
UECNTX.RelReq.UENotOnline
3-30
Counter Description
The eNodeB judge UE's state according to HARQ feedback algorithm. If the UE's state is
concluded as offline, the eNodeB will trigger UE release.
Triggering Point
When the eNodeB sends the UE CONTEXT RELEASE REQUEST message to the MME
due to Radio Connection With UE Lost.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to UE offline.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.12 C373220624
Counter Name
Number of Context Release by MME due to Other Reason
Short Name
UECNTX.RelReq.OtherReason
Counter Description
The eNodeB receives the UEContextReleaseCommand message from MME, in which
the Cause excludes Normal Release, Detach ,Authentication failure, Failure in the Radio
Interface Procedure , Successful Handover and Interaction with other procedure. The
counter is used to count the number of UE Context Release initiated by MME due to the
above condition.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME.
Refer to Sampling Point 1.
3-31
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.13 C373220634
Counter Name
Number of Context Release by MME due to Handover Complete
Short Name
UECNTX.RelReq.HoComplete
Counter Description
1 The eNodeB receives the UE CONTEXT RELEASE COMMAND message from the MME
that indicate the S1 handover complete.
2 The eNodeB receives the UE CONTEXT RELEASE message from other eNodeB that
indicate the X2 handover complete.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME or
the UEContextRelease message from other eNodeB indicating handover complete.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME or the UEContextRelease
message from target eNodeB indicating handover complete.
Counter Type
Accumulated value
3-32
Sampling Period
Event triggered
Unit
times
3.4.3.14 C373220635
Counter Name
Number of Context Release by ENB due to CCO cause
Short Name
UECNTX.RelReq.CCO
Counter Description
The eNodeB concludes UE CCO to other cell or eNodeB, then trigger UE release.
Triggering Point
When the eNodeB sends the UEContextReleaseRequest message to the MME due to
CCO.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the UEContextReleaseRequest
message to the MME due to CCO.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.15 C373220637
Counter Name
Number of Context Release due to Uu interface Timeout
3-33
Short Name
UECNTX.RelReq.eNodebUuTimeOut
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. When the RNLC detects the expiry of the Uu interface
signaling timer and sends a UE CONTEXT RELEASE REQUEST message to the MME,
this counter is incremented. The corresponding release cause is reported to "C373220612
Context Release, Number of Release Caused by ENB Uu Interface Failure".
Triggering Point
When the RNLC detects the expiry of the Uu interface signaling timer and sends a UE
CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC detects the expiry of the Uu interface signaling timer and sends a UE
CONTEXT RELEASE REQUEST message to the MME, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.16 C373220638
Counter Name
Number of Context Release due to RLF triggered by Poor Uu Quality
Short Name
UECNTX.RelReq.eNodebRlfPoorUuQua
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. When the RNLC receives an RLF message reported
3-34
by the CMAC indicating an invalid uplink SRS measurement, high uplink or downlink
HARQFail, and sends a UE CONTEXT RELEASE REQUEST message to the MME, this
counter is incremented. The corresponding release cause is reported to "C373220612
Context Release, Number of Release Caused by ENB Uu Interface Failure".
Triggering Point
When the RNLC receives an RLF message reported by the CMAC indicating an invalid
uplink SRS measurement, high uplink or downlink HARQFail, and sends a UE CONTEXT
RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC receives an RLF message reported by the CMAC indicating an invalid
uplink SRS measurement, high uplink or downlink HARQFail, and sends a UE CONTEXT
RELEASE REQUEST message to the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.17 C373220639
Counter Name
Number of Context Release due to Maximum of RLC Retransmission
Short Name
UECNTX.RelReq.eNodebMaxRlcRetrans
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. When the RNLC receives an RNLU error message
that indicates an RLC error, and sends a UE CONTEXT RELEASE REQUEST message
to the MME, this counter is incremented. The corresponding release cause is reported to
"C373220612 Context Release, Number of Release Caused by ENB Uu Interface Failure".
3-35
Triggering Point
When the RNLC receives an RNLU error message that indicates an RLC error, and sends
a UE CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC receives an RNLU error message that indicates an RLC error, and sends
a UE CONTEXT RELEASE REQUEST message to the MME, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.18 C373220640
Counter Name
Number of Context Release due to PDCP Integrity protection Failure
Short Name
UECNTX.RelReq.eNodebPdcpInteProFail
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by radio link failure. When the RNLC receives an RNLU error message
that indicates a PDCP error, and sends a UE CONTEXT RELEASE REQUEST message
to the MME, this counter is incremented. The corresponding release cause is reported to
"C373220612 Context Release, Number of Release Caused by ENB Uu Interface Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates a PDCP error, and sends
a UE CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 1.
3-36
Update Description
When the RNLC receives an RNLU error message that indicates a PDCP error, and sends
a UE CONTEXT RELEASE REQUEST message to the MME, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.19 C373220641
Counter Name
Number of Context Release due to GTPU Error Indication
Short Name
UECNTX.RelReq.eNodebGtpuErrInd
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. When the RNLC receives an RNLU error message that
indicates a GTPU error, and sends a UE CONTEXT RELEASE REQUEST message to
the MME, this counter is incremented. The corresponding release cause is reported to
"C373220621 Context Release, Number of Release Caused by ENB S1 link Failure".
Triggering Point
When the RNLC receives an RNLU error message that indicates a GTPU error, and sends
a UE CONTEXT RELEASE REQUEST message to the MME, this counter is updated.
Update Description
When the RNLC receives an RNLU error message that indicates a GTPU error, and sends
a UE CONTEXT RELEASE REQUEST message to the MME, this counter is incremented
by one.
3-37
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.4.3.20 C373220642
Counter Name
Number of Context Release due to Path Fault
Short Name
UECNTX.RelReq.eNodebPathFault
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. When the RNLC receives a PATH fault reported by
the RNLU, and sends a UE CONTEXT RELEASE REQUEST message to the MME, this
counter is incremented. The corresponding release cause is reported to "C373220621
Context Release, Number of Release Caused by ENB S1 link Failure".
Triggering Point
When the RNLC receives a PATH fault reported by the RNLU, and sends a UE CONTEXT
RELEASE REQUEST message to the MME, this counter is updated.
Refer to Sampling Point 1.
Update Description
When the RNLC receives a PATH fault reported by the RNLU, and sends a UE CONTEXT
RELEASE REQUEST message to the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
3-38
Unit
times
3.4.3.21 C373220643
Counter Name
Number of Context Release due to Optical Port Fault
Short Name
UECNTX.RelReq.eNodebOpticalFault
Counter Description
This counter is an internal counter indicating the specific cause of the RRC connection
release caused by S1 link failure. When the RNLC receives an OAM optical interface
fault and sends a UE CONTEXT RELEASE REQUEST message to the MME, this counter
is incremented. The corresponding release cause is reported to "C373220621 Context
Release, Number of Release Caused by ENB S1 link Failure".
Triggering Point
This counter is updated when the RNLC receives an OAM optical interface fault and sends
a UE CONTEXT RELEASE REQUEST message to the MME.
Refer to Sampling Point 1.
Update Description
When the RNLC receives an OAM optical interface fault and sends a UE CONTEXT
RELEASE REQUEST message to the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-39
Counter Name
Number of Attempted Mt-Access Initial Context Setup with CSFB
Short Name
-
3-40
Counter Description
After the LTE user sends the service request message to MME, the MME find the eNodeB
not supportting CS service.Then the MME requires eNodeB to establish the UE Context
which indicates CS service fallback to GERAN/UTRAN. The counter calculates the number
of this UE Context setup attempts.
Triggering Point
When the eNodeB receives the InitialContextSetupRequest with CSFB indication message
from the MME and the RRC establishmentCause is mt-access.
Refer to Figure 3-1 UE Context Setup 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
InitialContextSetupRequest with CSFB indication message from the MME for mt-Access.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.2 C373220645
Counter Name
Number of Successful Mt-Access Initial Context Setup with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME for mt-Access, the MME
requires eNodeB to establish the UE Context which indicates CS service fallback to
GERAN/UTRAN. The counter calculates the number of this UE Context successful setup.
Triggering Point
When the eNodeB replys the InitialContextSetupResponse message from the MME for
CSFB and the RRC establishmentCause is mt-access.
3-41
Update Description
The counter is incremented by 1 when the eNodeB replys the InitialContextSetupResponse
message from the MME for CSFB mt-Access.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.3 C373220646
Counter Name
Number of Mt-Access UE Context Release with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME for mt-Access, the MME
requires eNodeB to establish the UE Context which indicates CS service fallback to
GERAN/UTRAN. The eNodeB indicates the UE accessing to the target GERAN/UTRAN
cell through the PS HO/CCO/Redirection. The counter calculates the number of this UE
Context release.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME for
CSFB and the RRC establishmentCause is mt-access.
Refer to Figure 3-3 UE Context Release 2.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME for CSFB mt-Access.
3-42
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.4 C373220647
Counter Name
Number of Attempted Mo-Signalling or Mo-Data Initial Context Setup with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME for mo-signaling or mo-data,
the MME requires eNodeB to establish the UE Context which indicates CS service fallback
to GERAN/UTRAN. The counter calculates the number of this UE Context request.
Triggering Point
When the eNodeB receives the InitialContextSetupRequest with CSFB indication message
from the MME and the RRC establishmentCause is mo-signalling.
Refer to Figure 3-1 UE Context Setup 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
InitialContextSetupRequest with CSFB indication message from the MME for
mo-signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-43
3.5.3.5 C373220648
Counter Name
Number of Successful Mo-Signalling or Mo-Data Initial Context Setup with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME for mo-signaling or mo-data,
the MME requires eNodeB to establish the UE Context which indicates CS service fallback
to GERAN/UTRAN. The counter calculates the number of this UE Context successful
setup.
Triggering Point
When the eNodeB replys the InitialContextSetupResponse message from the MME for
CSFB and the RRC establishmentCause is mo-signalling.
Refer to Figure 3-1 UE Context Setup 4.
Update Description
The counter is incremented by 1 when the eNodeB replys the InitialContextSetupResponse
message from the MME for CSFB mo-signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.6 C373220649
Counter Name
Number of Mo-Signalling or Mo-Data UE Context Release with CSFB
Short Name
-
3-44
Counter Description
After the LTE user sends the service request message to MME for mo-signaling or mo-data,
the MME requires eNodeB to establish the UE Context which indicates CS service fallback
to GERAN/UTRAN. The eNodeB indicates the UE accessing to the target GERAN/UTRAN
cell through the PS HO/CCO/Redirection. The counter calculates the number of this UE
Context release.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME for
CSFB and the RRC establishmentCause is mo-signalling.
Refer to Figure 3-1 UE Context Setup 2.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME for CSFB mo-signalling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.7 C373220650
Counter Name
Number of Attempted Context Modification with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME, the MME requires eNodeB
to modify the UE Context which indicates CS service fallback to GERAN/UTRAN. The
counter calculates the number of UE Context modification request for CSFB.
3-45
Triggering Point
When the eNodeB receives the UEContextModificationRequest with CSFB indication
message from the MME.
Refer to Figure 3-2 UE Context Modificatio 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextModificationRequest with CSFB indication message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.8 C373220651
Counter Name
Number of Successful Context Modification with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME, the MME requires eNodeB
to modify the UE Context which indicates CS service fallback to GERAN/UTRAN. The
counter calculates the number of successful UE Context modification for CSFB.
Triggering Point
When the eNodeB replys the UEContextModificationResponse message from the MME
for CSFB.
Update Description
The counter is incremented by 1 when the eNodeB replys the
UEContextModificationResponse message from the MME for CSFB.
3-46
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.9 C373220652
Counter Name
Number of UE Context Release after Successful Context Modification with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME, the MME requires eNodeB
to modify the UE Context which indicates CS service fallback to GERAN/UTRAN. The
eNodeB indicates the UE accessing to the target GERAN/UTRAN cell through the PS
HO/CCO/Redirection. The counter calculates the number of this UE Context release.
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME for
CSFB.
Refer to Figure 3-3 UE Context Release 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME for CSFB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-47
3.5.3.10 C373220653
Counter Name
Number of Attempted Other Initial Context Setup with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME for neither mt nor mo type,
the MME find the eNodeB not supportting CS service.Then the MME requires eNodeB
to establish the UE Context which indicates CS service fallback to GERAN/UTRAN. The
counter calculates the number of this UE Context setup attempts.
Triggering Point
When the eNodeB receives the InitialContextSetupRequest with CSFB indication message
from the MME and the RRC establishmentCause neither mt nor mo type.
Refer to Figure 3-1 UE Context Setup 1.
Update Description
The counter is incremented by 1 when the eNodeB receives the
InitialContextSetupRequest with CSFB indication message from the MME for neither
mt nor mo type.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.11 C373220654
Counter Name
Number of Successful Other Initial Context Setup with CSFB
Short Name
-
3-48
Counter Description
After the LTE user sends the service request message to MME for neither mt nor mo type,
the MME requires eNodeB to establish the UE Context which indicates CS service fallback
to GERAN/UTRAN. The counter calculates the number of this UE Context successful
setup.
Triggering Point
When the eNodeB replys the InitialContextSetupResponse message from the MME for
CSFB and the RRC establishmentCause neither mt nor mo type.
Refer to Figure 3-1 UE Context Setup 4.
Update Description
The counter is incremented by 1 when the eNodeB replys the InitialContextSetupResponse
message from the MME with CSFB for neither mt nor mo type.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3.5.3.12 C373220655
Counter Name
Number of Other UE Context Release with CSFB
Short Name
-
Counter Description
After the LTE user sends the service request message to MME for neither mt nor mo type,
the MME requires eNodeB to establish the UE Context which indicates CS service fallback
to GERAN/UTRAN. The eNodeB indicates the UE accessing to the target GERAN/UTRAN
cell through the PS HO/CCO/Redirection. The counter calculates the number of this UE
Context release.
3-49
Triggering Point
When the eNodeB receives the UEContextReleaseCommand message from the MME for
CSFB and the RRC establishmentCause neither mt nor mo type.
Refer to Figure 3-3 UE Context Release 2.
Update Description
The counter is incremented by 1 when the eNodeB receives the
UEContextReleaseCommand message from the MME with CSFB for neither mt nor
mo type.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-50
Counter Name
Number of Successful Security Mode
Short Name
UeSecuMode.Succ
Counter Description
The eNodeB will send the SecurityModeCommand message to UE during Initial UE
Context setup. When it receives the SecurityModeComplete message from UE,indicating
successful security activation.
Triggering Point
When the eNodeB receives the SecurityModeComplete message from the UE
Update Description
The counter is incremented by 1 when the eNodeB receives the SecurityModeComplete
message from the UE.
Counter Type
Accumulated value
3-51
Sampling Period
Event triggered
Unit
times
3.6.3.2 C373220631
Counter Name
Number of Failed Security Mode
Short Name
UeSecuMode.Fail
Counter Description
The eNodeB will send the SecurityModeCommand message to UE during Initial UE
Context setup. When it receives the SecurityModefailure message from UE,indicating
security activation failures.
Triggering Point
When the eNodeB receives the SecurityModefailure message from the UE
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the eNodeB receives the SecurityModefailure
message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
3-52
4-1
Counter Name
Number of Send Init UE Message by ENB
Short Name
S1SIG.ConnEstabAtt
Counter Description
Transmission of an INITIAL UE MESSAGE by the eNodeB to the the MME.
Triggering Point
When the eNodeB sends the InitialUEMessage to MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when eNodeB sends InitialUEMessage to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4.1.3.2 C373495201
Counter Name
Number of Received First Message by ENB after Init UE Message
Short Name
S1SIG.ConnEstabSucc
Counter Description
On receipt by The eNodeB of first message from MME which succeeds INITIAL UE
MESSAGE message on an UE-associated logical S1-connection.
4-2
Triggering Point
When the eNodeB receives the first signal message from MME after sending the
InitialUEMessage.
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when eNodeB receives the first signal message from the
MME after sending the InitialUEMessage.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
l Sampling Point 1: The eNodeB sends the ErrorIndication Message to the MME.
l Sampling Point 2: The eNodeB receives the ErrorIndication message from the MME.
4-3
Counter Name
Number of S1 Error Indications sent by eNB,Message Error Reasons
Short Name
S1.ErrorIndicatByEnb.MsgError
Counter Description
After the eNodeB receive the message from the MME, it check the parameter failed. Then
the eNodeB sends the ErrorIndication message to the MME.
Triggering Point
When the eNodeB sends the ErrorIndication message to the MME due to parameter error.
Refer to Sampling Point 1.
Update Description
When the eNodeB sends the ErrorIndication message to the MME due to parameter
error,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
4-4
Unit
times
4.2.3.2 C373960441
Counter Name
Number of S1 Error Indications sent by eNB,Other Reasons
Short Name
S1.ErrorIndicatByEnb.OtherCause
Counter Description
After the eNodeB receive the message from the MME, it occur other failed. Then the
eNodeB sends the ErrorIndication message to the MME.
Triggering Point
When the eNodeB sends the ErrorIndication message to the MME due to other reason.
Refer to Sampling Point 1.
Update Description
When the eNodeB sends the ErrorIndication message to the MME due to other reason,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4.2.3.3 C373960442
Counter Name
Number of S1 Error Indications sent by MME,Message Error Reasons
Short Name
S1.ErrorIndicatByMme.MsgError
4-5
Counter Description
After the MME receive the message from the eNodeB, it check the parameter failed. Then
the MME sends the ErrorIndication message to the eNodeB.
Triggering Point
When the eNodeB receives the ErrorIndication message from the MME due to parameter
error.
Refer to Sampling Point 2.
Update Description
When the eNodeB receives the ErrorIndication message from the MME due to parameter
error,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4.2.3.4 C373960443
Counter Name
Number of S1 Error Indications sent by MME,Other Reasons
Short Name
S1.ErrorIndicatByMme.OtherCause
Counter Description
After the MME receive the message from the eNodeB, it occur other failed. Then the MME
sends the ErrorIndication message to the eNodeB.
Triggering Point
When the eNodeB receives the ErrorIndication message from the MME due to other
reason.
4-6
Update Description
When the eNodeB receives the ErrorIndication message from the MME due to other
reason,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4.3 S1 Setup
4.3.1 Flow Charts and Sampling points
Figure 4-3 S1 Setup
l Sampling Point 1: The eNodeB sends the S1SetupRequest Message to the MME.
l Sampling Point 2: The eNodeB receives the S1SetupResponse message from the
MME.
Counter Name
Number of S1 Setup Sent by eNB
Short Name
-
4-7
Counter Description
The eNodeB will trigger to set up the S1 link after the SCTP link is abnormal. The counter
records the number of attempted S1 Setup initiated by eNodeB.
Triggering Point
When the eNodeB sends the S1SetupRequest message to MME
Refer to Sampling Point 1.
Update Description
When the eNodeB sends the S1ResetRequest message to MME,the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4.3.3.2 C374000535
Counter Name
Number of Successful S1 Setup Sent by eNB
Short Name
-
Counter Description
The eNodeB will trigger to set up the S1 link after the SCTP link is abnormal. The counter
records the number of successful S1 Setup initiated by eNodeB.
Triggering Point
When the eNodeB receives the S1SetupResponse message from MME
Refer to Sampling Point 2.
Update Description
When the eNodeB receives the S1ResetResponse message from MME,the counter is
incremented by 1.
4-8
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4-9
4-10
5.1 MRO
5.1.1 Flow Charts and Sampling Points
MRO refers to that handover fault and unnecessary handover detection and optimize.
The statistics of MRO includes handover too late, handover too early and handover in error
cell.
5-1
Counter Name
Number of Too Early HO During Handover(Cell)
Short Name
SON.MRO.TooEarlyDHO
Counter Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell
Refer to .
Update Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell,the counter is incremented by 1.
5-2
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.2 C373474912
Counter Name
Number of Too Early HO After Handover(Cell)
Short Name
SON.MRO.TooEarlyAHO
Counter Description
When the UE occurs RRC Reestablishment in source cell as a result of RLF in the target
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC Reestablishment in source cell as a result of RLF in the target
cell
Refer to .
Update Description
When the UE occurs RRC Reestablishment in source cell as a result of RLF in the target
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-3
5.1.3.3 C373474913
Counter Name
Number of Too Late HO Before Handover(Cell)
Short Name
SON.MRO.TooLateBHO
Counter Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport not reported before RLF,it is added to the counter.
Triggering Point
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport not reported before RLF
Refer to .
Update Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport not reported before RLF,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.4 C373474914
Counter Name
Number of Too Late HO During Handover(Cell)
Short Name
SON.MRO.TooLateDHO
5-4
Counter Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport reported before RLF,it is added to the counter.
Triggering Point
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport reported before RLF
Refer to .
Update Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport reported before RLF,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.5 C373474915
Counter Name
Number of HO in Error Cell During Handover(Cell)
Short Name
SON.MRO.InErrCellDHO
Counter Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the source
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the source
cell
Refer to .
5-5
Update Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the source
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.6 C373474916
Counter Name
Number of HO in Error Cell After Handover(Cell)
Short Name
SON.MRO.InErrCellAHO
Counter Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the target
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the target cell
Refer to .
Update Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the target
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-6
Unit
times
5.1.3.7 C373474917
Counter Name
Number of Coverage Hole in Cell(Cell)
Short Name
SON.MRO.CoverHollInCell
Counter Description
When the UE occurs RRC reestablishment as a result of RLF in cell,and the cause is other
failures,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment as a result of RLF in cell,and the cause is other
failures.
Refer to .
Update Description
When the UE occurs RRC reestablishment as a result of RLF in cell,and the cause is other
failures,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.8 C373474918
Counter Name
Number of Coverage Hole between Cell(Cell)
Short Name
SON.MRO.CoverHollBetwCell
5-7
Counter Description
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell,and the cause is other failures,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell,and the cause is other failures.
Refer to .
Update Description
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell,and the cause is other failures,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.9 C373474919
Counter Name
Number of No Neighbor Relation(Cell)
Short Name
SON.MRO.NoNeiRelat
Counter Description
When the eNodeB detects the PCI of the neighbour cell without configuration,it is added
to the counter.
Triggering Point
When the eNodeB detects the PCI of the neighbour cell without configuration.
Refer to .
5-8
Update Description
When the eNodeB detects the PCI of the neighbour cell without configuration,the counter
is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.10 C373475001
Counter Name
Number of Unnecessary Handover to UTRAN(Cell)
Short Name
SON.MRO.Utran.UnnecHO
Counter Description
Both E-UTRAN and E-UTRAN neighbor cells are available for a handover, and the source
eNodeB may select UTRAN neighbor cells for the UE. This counter counts the number of
times that UTRAN neighbor cells are selected because handovers to LTE neighbor cells
are too late.
Triggering Point
When the system detects unnecessary handovers to UTRAN neighbor cells, this counter
is updated.
Refer to .
Update Description
When the system detects unnecessary handovers to UTRAN neighbor cells, this counter
is incremented by one.
Counter Type
Accumulated value
5-9
Sampling Period
Event triggered
Unit
times
5.1.3.11 C373475002
Counter Name
Number of Handover to UTRAN too Early(Cell)
Short Name
SON.MRO.Utran.TooEarlyHO
Counter Description
Both E-UTRAN and E-UTRAN neighbor cells are available for a handover, and the source
eNodeB may select UTRAN neighbor cells for the UE. This counter counts the number
of times that UTRAN neighbor cells are selected because handovers to UTRAN neighbor
cells are early.
Triggering Point
When the system detects too early handovers to UTRAN neighbor cells, this counter is
updated.
Refer to .
Update Description
When the system detects too early handovers to UTRAN neighbor cells, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-10
5.1.3.12 C373723000
Counter Name
Number of Failed Handover Executions Due to Handover Too Early
Short Name
MRO.HoEarly
Counter Description
When the UE occurs RRC Reestablishment as a result of RLF in the source cell,it is added
to the counter.
Triggering Point
When the UE occurs RRC reestablishment as a result of RLF in the source cell.
Refer to .
Update Description
When the UE occurs RRC Reestablishment as a result of RLF in the source cell,the counter
is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.13 C373723001
Counter Name
Number of Failed Handover Executions Due to Handover Too Later
Short Name
MRO.HoLater
Counter Description
When the UE occurs RRC Reestablishment as a result of RLF in the target cell,it is added
to the counter.
5-11
Triggering Point
When the UE occurs RRC reestablishment as a result of RLF in the target cell.
Refer to .
Update Description
When the UE occurs RRC Reestablishment as a result of RLF in the target cell,the counter
is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.14 C373723002
Counter Name
Number of Failed Handover Executions Due to Handover Failed
Short Name
MRO.HoWrong
Counter Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF,it is added to
the counter.
Triggering Point
When the UE occurs RRC reestablishment in error cell as a result of RLF.
Refer to .
Update Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF,the counter is
incremented by 1.
Counter Type
Accumulated value
5-12
Sampling Period
Event triggered
Unit
times
5.1.3.15 C373723003
Counter Name
Number of Ping-Pong Handover
Short Name
MRO.HoPingPong
Counter Description
When the UE occurs handover from source cell to target cell, then occurs handover back
to source cell within the threshold of time successfully, it is added to the counter.
Triggering Point
When the UE occurs handover from source cell to target cell, then occurs handover back
to source cell within the threshold of time successfully.
Refer to .
Update Description
When the UE occurs handover from source cell to target cell, then occurs handover back
to source cell within the threshold of time successfully, the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.16 C373723004
Counter Name
Number of Too Early Ho During Handover(Cell Pair)
5-13
Short Name
-
Counter Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell.
Refer to .
Update Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.17 C373723005
Counter Name
Number of Too Early HO After Handover(Cell Pair)
Short Name
-
Counter Description
When the UE occurs RRC Reestablishment in source cell as a result of RLF in the target
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in source cell as a result of RLF in the target
cell.
5-14
Refer to .
Update Description
When the UE occurs RRC Reestablishment in source cell as a result of RLF in the target
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.18 C373723006
Counter Name
Number of Too Late HO Before Handover(Cell Pair)
Short Name
-
Counter Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport not reported before RLF,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport not reported before RLF.
Refer to .
Update Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport not reported before RLF,the counter is incremented by 1.
Counter Type
Accumulated value
5-15
Sampling Period
Event triggered
Unit
times
5.1.3.19 C373723007
Counter Name
Number of Too Late HO During Handover(Cell Pair)
Short Name
-
Counter Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport reported before RLF,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport reported before RLF.
Refer to .
Update Description
When the UE occurs RRC Reestablishment in target cell as a result of RLF in the source
cell and the MeasurementReport reported before RLF,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.20 C373723008
Counter Name
Number of HO in Error Cell During Handover(Cell Pair)
5-16
Short Name
-
Counter Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the source
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in error cell as a result of RLF in the source
cell.
Refer to .
Update Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the source
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.21 C373723009
Counter Name
Number of HO in Error Cell After Handover(Cell Pair)
Short Name
-
Counter Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the target
cell,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in error cell as a result of RLF in the target cell.
Refer to .
5-17
Update Description
When the UE occurs RRC Reestablishment in error cell as a result of RLF in the target
cell,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.22 C373723011
Counter Name
Number of Coverage Holl between Cell(Cell Pair)
Short Name
-
Counter Description
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell,and the cause is other failures,it is added to the counter.
Triggering Point
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell,and the cause is other failures.
Refer to .
Update Description
When the UE occurs RRC reestablishment in target cell as a result of RLF in the source
cell,and the cause is other failures,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-18
Unit
times
5.1.3.23 C373723012
Counter Name
Number of No Neighbor Relation(Cell Pair)
Short Name
-
Counter Description
When the eNodeB detects the PCI of the neighbour cell without configuration,it is added
to the counter.
Triggering Point
When the eNodeB detects the PCI of the neighbour cell without configuration.
Refer to .
Update Description
When the eNodeB detects the PCI of the neighbour cell without configuration,the counter
is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.24 C373723015
Counter Name
Number of Unnecessary Handover to UTRAN(Cell Pair)
Short Name
CellP.MRO.Utran.UnnecHO
5-19
Counter Description
When Available Neighbor cell list contains both the E-UTRAN neighbor cell and the UTRAN
neighbor cell,count the number of handover too early to UTRAN.The object type of the
counter is cell pair.
Triggering Point
When the eNodeB detects the unnecessary handover,the fault is handover too late to
EUTRAN.
Refer to .
Update Description
When the eNodeB detects the unnecessary handover,the fault is handover too late to
EUTRAN,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.1.3.25 C373723016
Counter Name
Number of Handover to UTRAN Too Early(Cell Pair)
Short Name
CellP.MRO.Utran.TooEarlyHO
Counter Description
When Available Neighbor cell list contains both the E-UTRAN neighbor cell and the UTRAN
neighbor cell,count the number of Unnecessary Handover to UTRANdue to Handover
too late to EUTRAN.The object type of the counter is cell pair.
Triggering Point
When the eNodeB detects the unnecessary handover,the fault is handover too early to
UTRAN.
Refer to .
5-20
Update Description
When the eNodeB detects the unnecessary handover,the fault is handover too early to
UTRAN,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2 RACH
5.2.1 Flow Charts and Sampling Points
No chart.
5-21
Counter Name
Number of No RACH Dedicate Preamble Assigned
Short Name
-
Counter Description
The counter provides the number of dedicated RACH preambles failed to assign to UEs.
Triggering Point
When all dedicated RACH preambles are assigned to UEs.
Refer to .
Update Description
The counter is incremented by 1 when all dedicated RACH preambles are assigned to
UEs.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.2 C373444758
Counter Name
Total Number of RACH Dedicate Preamble Assigned
5-22
Short Name
-
Counter Description
The counter provides the number of dedicated RACH preambles assigned to UEs.
Triggering Point
When a dedicated RACH preambles is assigned to UEs
Refer to .
Update Description
The counter is incremented by 1 when a dedicated RACH preambles is assigned to UEs.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.3 C373444761
Counter Name
Times of Contention Based Random Access Initiated by Handover
Short Name
-
Counter Description
The counter provides the number of dedicated RACH preambles failed to assign to Ues
during handover procedure.
Triggering Point
When all dedicated RACH preambles are assigned to Ues during handover procedure
Refer to .
5-23
Update Description
The counter is incremented by 1 when all dedicated RACH preambles are assigned to Ues
during handover procedure.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
5.2.3.4 C373444762
Counter Name
Times of Non-Contention Based Random Access Initiated by Handover
Short Name
-
Counter Description
The counter provides the number of dedicated RACH preambles assigned to Ues during
handover procedure.
Triggering Point
When a dedicated RACH preambles is assigned to UEs successfully during handover
procedure
Refer to .
Update Description
The counter is incremented by 1 when a dedicated RACH preambles is assigned to UEs
successfully during handover procedure.
Counter Type
Accumulated value
Sampling Period
15 min
5-24
Unit
times
5.2.3.5 C373474902
Counter Name
UE Send Preamble Successfully with 1 Times
Short Name
-
Counter Description
This counter counts the number of times that intra-system energy-saving cell load meets
the energy-saving condition.
Triggering Point
When energy-saving cell load meets the energy-saving condition, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.6 C373474903
Counter Name
UE Send Preamble Successfully with 2 Times
Short Name
-
5-25
Counter Description
When eNodeB enables SON RO function,eNodeB statistics random access information of
following access UE.If UE access successfully by sending 2 preambles,it is added to the
counter.
Triggering Point
When the eNodeB receives the UE INFORMATION RESPONSE message,If UE access
successfully by sending 2 preambles.
Refer to .
Update Description
When eNodeB enables SON RO function, eNodeB statistics random access information
of following access UE.If UE access successfully by sending 2 preambles,the counter is
increased by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.7 C373474904
Counter Name
UE Send Preamble Successfully with 3 Times
Short Name
-
Counter Description
When eNodeB enables SON RO function,eNodeB statistics random access information of
following access UE.If UE access successfully by sending 3 preambles,it is added to the
counter.
Triggering Point
When the eNodeB receives the UE INFORMATION RESPONSE message,If UE access
successfully by sending 3 preambles.
5-26
Refer to .
Update Description
When eNodeB enables SON RO function, eNodeB statistics random access information
of following access UE.If UE access successfully by sending 3 preambles,the counter is
increased by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.8 C373474905
Counter Name
UE Send Preamble Successfully with 4 Times
Short Name
-
Counter Description
When eNodeB enables SON RO function,eNodeB statistics random access information of
following access UE.If UE access successfully by sending 4 preambles,it is added to the
counter.
Triggering Point
When the eNodeB receives the UE INFORMATION RESPONSE message,If UE access
successfully by sending 4 preambles.
Refer to .
Update Description
When eNodeB enables SON RO function, eNodeB statistics random access information
of following access UE.If UE access successfully by sending 4 preambles,the counter is
increased by 1.
5-27
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.9 C373474906
Counter Name
UE Send Preamble Successfully with 5 Times
Short Name
-
Counter Description
When eNodeB enables SON RO function,eNodeB statistics random access information of
following access UE.If UE access successfully by sending 5 preambles,it is added to the
counter.
Triggering Point
When the eNodeB receives the UE INFORMATION RESPONSE message,If UE access
successfully by sending 5 preambles.
Refer to .
Update Description
When eNodeB enables SON RO function, eNodeB statistics random access information
of following access UE.If UE access successfully by sending 5 preambles,the counter is
increased by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-28
5.2.3.10 C373474907
Counter Name
UE Send Preamble Successfully with 5 More Times
Short Name
-
Counter Description
When eNodeB enables SON RO function,eNodeB statistics random access information
of following access UE.If UE access successfully by sending more than 5 preambles,it is
added to the counter.
Triggering Point
When the eNodeB receives the UE INFORMATION RESPONSE message,If UE access
successfully by sending more than 5 preambles.
Refer to .
Update Description
When eNodeB enables SON RO function, eNodeB statistics random access information
of following access UE.If UE access successfully by sending more than 5 preambles,the
counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.2.3.11 C373474908
Counter Name
Number of UE which Have Contention in Access Procedure
Short Name
-
5-29
Counter Description
When eNodeB enables SON RO function,eNodeB statistics random access information of
following access UE. If UE have contention in access procedure,it is added to the counter.
Triggering Point
When the UE report its random access information to eNodeB
Refer to .
Update Description
When the UE report its random access information to eNodeB,and the UE have contention
in access procedure,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
5.2.3.12 C373474909
Counter Name
Number of UE which Have No Contention in Access Procedure
Short Name
-
Counter Description
When eNB enables SON RO function, eNB statistics random access information of
following access UE. If UE free contention in access procedure, it is added to the counter.
Triggering Point
When the UE report its random access information to eNB
Refer to .
Update Description
When the UE report its random access information to eNB, the counter is increased by 1.
5-30
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
5.2.3.13 C373474927
Counter Name
Number of UE which Access Successfully by Sending 1 Preamble and No Contention in
Access Procedure
Short Name
-
Counter Description
When eNB enables SON RO function, eNB statistics random access information of
following access UE. If UE access successfully by sending 1 preamble and free contention
in access procedure, this is added to the counter.
Triggering Point
When the UE report its random access information to eNB
Refer to .
Update Description
When eNB enables SON RO function, eNB statistics random access information of
following access UE. If UE access successfully by sending 1 preamble and free contention
in access procedure, this counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
5-31
5.2.3.14 C373474928
Counter Name
Preamble Number Send by UE which Have No Contention in Access Procedure
Short Name
-
Counter Description
When eNB enables SON RO function, eNB statistics random access information of
following access UE. If UE free contention and this UE send preamble number is Ns in
access procedure, it is added to the counter.
Triggering Point
When the UE report its random access information to eNB
Refer to .
Update Description
When eNB enables SON RO function, eNB statistics random access information of
following access UE. If UE free contention and this UE send preamble number is Ns in
access procedure,this counter is increased by Ns.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
unit
5.3 ANR
5.3.1 Flow Charts and Sampling Points
No chart.
5-32
14 C373474947 Number of Report Neighbor Relation Addition to OMC between LTE and
UTRAN
20 C373474953 Number of Report Neighbor Relation Addition to OMC between LTE and
CDMA
26 C373474959 Number of Report Neighbor Relation Addition to OMC between LTE and
GSM
5-33
32 C373474965 Number of Successful Addition of Normal Neighbor Cell between LTE and
UTRAN
34 C373474967 Number of Failed Handover to Temporary Neighbor Cell between LTE and
UTRAN
35 C373474968 Number of Report Neighbor Relation Deletion to OMC between LTE and
UTRAN
36 C373474969 Number of Successfully Deleted Normal Neighbor Cell between LTE and
UTRAN
37 C373474970 Number of Successful Addition of Normal Neighbor Cell between LTE and
CDMA
39 C373474972 Number of Failed Handover to Temporary Neighbor Cell between LTE and
CDMA
40 C373474973 Number of Report Neighbor Relation Deletion to OMC between LTE and
CDMA
41 C373474974 Number of Successfully Deleted Normal Neighbor Cell between LTE and
CDMA
42 C373474975 Number of Successful Addition of Normal Neighbor Cell between LTE and
GSM
44 C373474977 Number of Failed Handover to Temporary Neighbor Cell between LTE and
GSM
45 C373474978 Number of Report Neighbor Relation Deletion to OMC between LTE and
GSM
46 C373474979 Number of Successfully Deleted Normal Neighbor Cell between LTE and
GSM
5-34
51 C373474984 Number of not Meeting Normal Neighbour Relation Addition Condition intra
RAT
66 C373990492 The total number of request that removing redundancy adjacent LTE cell.
67 C373990493 The total number of removing redundancy adjacent LTE cell successfully.
68 C373990494 The total number of request that removing redundancy adjacent UTRAN cell.
69 C373990495 The total number of removing redundancy adjacent UTRAN cell successfully.
70 C373990496 The total number of request that removing redundancy adjacent GSM cell.
71 C373990497 The total number of removing redundancy adjacent GSM cell successfully.
5-35
Counter Name
Number of PCI Conflict(Cell)
Short Name
SON.PCI.Conflict
Counter Description
Both E-UTRAN and E-UTRAN neighbor cells are available for a handover, and the source
eNodeB may select UTRAN neighbor cells for the UE. This counter counts the number of
times that UTRAN neighbor cells are selected because handovers to LTE neighbor cells
are too late.
Triggering Point
When the system detects unnecessary handovers to UTRAN neighbor cells, this counter
is updated.
Refer to .
Update Description
When the system detects unnecessary handovers to UTRAN neighbor cells, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.2 C373474901
Counter Name
Number of PCI Confusion(Cell)
5-36
Short Name
SON.PCI.Confusion
Counter Description
Both E-UTRAN and E-UTRAN neighbor cells are available for a handover, and the source
eNodeB may select UTRAN neighbor cells for the UE. This counter counts the number
of times that UTRAN neighbor cells are selected because handovers to UTRAN neighbor
cells are early.
Triggering Point
When the system detects too early handovers to UTRAN neighbor cells, this counter is
updated.
Refer to .
Update Description
When the system detects too early handovers to UTRAN neighbor cells, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.3 C373474920
Counter Name
Number of Different Detect Cell intra RAT
Short Name
SON.ANR.IntraRat.DeteUnkownCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected,it is added to the counter.
5-37
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
different LTE unknown PCIs are detected.
Refer to .
Update Description
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different LTE unknown PCIs are
detected intra RAT.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.4 C373474921
Counter Name
Number of Report Detect Cell intra RAT
Short Name
SON.ANR.IntraRat.DeteReportCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected .
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the MeasurementReport
message from the UE in which the LTE unknown PCIs are detected intra RAT.
5-38
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.5 C373474922
Counter Name
Number of ReportCGI by UE intra RAT
Short Name
SON.ANR.IntraRat.ReportCGIByUE
Counter Description
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of LTE cell,it is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of LTE cell.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to UE which purpose is ReportCGI of LTE cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-39
5.3.3.6 C373474923
Counter Name
Number of ReportCGI by Period intra RAT
Short Name
SON.ANR.IntraRat.SendReportCGI
Counter Description
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of LTE cell,it is
added to the counter.
Triggering Point
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of LTE cell.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB is triggered to send a ReportCGI
MESConfig to UE of LTE cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.7 C373474924
Counter Name
Number of Successful ReportCGI by Period intra RAT
Short Name
SON.ANR.IntraRat.ReportCGISucc
Counter Description
When the eNodeB receives the 'ReportCGI' MeasurementReport message about LTE cell
from the UE,it is added to the counter.
5-40
Triggering Point
When the eNodeB receives the 'ReportCGI' MeasurementReport message about LTE cell
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the 'ReportCGI'
MeasurementReport message about LTE cell from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.8 C373474925
Counter Name
Number of Report Neighbor Relation Addition to OMC intra RAT
Short Name
SON.ANR.IntraRat.ReportNeibRela
Counter Description
When the eNodeB sends the NeighbourRelation Adding message of LTE cell to the OMC,it
is added to the counter.
Triggering Point
When the eNodeB sends the NeighbourRelation Adding message of LTE cell to the OMC.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB sends the NeighbourRelation Adding
message of LTE cell to the OMC.
Counter Type
Accumulated value
5-41
Sampling Period
Event triggered
Unit
times
5.3.3.9 C373474942
Counter Name
Number of Different Detect Cell between LTE and UTRAN
Short Name
SON.ANR.InterUtran.DeteUnkownCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
EUTRAN unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
different EUTRAN unknown PCIs are detected.
Refer to .
Update Description
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different EUTRAN unknown
PCIs are detected.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-42
5.3.3.10 C373474943
Counter Name
Number of Report Detect Cell between LTE and UTRAN
Short Name
SON.ANR.InterUtran.DeteReportCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
EUTRAN unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
EUTRAN unknown PCIs are detected.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the MeasurementReport
message from the UE in which the EUTRAN unknown PCIs are detected.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.11 C373474944
Counter Name
Number of ReportCGI by UE between LTE and UTRAN
Short Name
SON.ANR.InterUtran.ReportCGIByUE
5-43
Counter Description
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of UTRAN cell,it is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of UTRAN cell.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to UE which purpose is ReportCGI of UTRAN
cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.12 C373474945
Counter Name
Number of ReportCGI by Period between LTE and UTRAN
Short Name
SON.ANR.InterUtran.SendReportCGI
Counter Description
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of UTRAN cell,it is
added to the counter.
Triggering Point
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of UTRAN cell.
Refer to .
5-44
Update Description
The counter is incremented by 1 when the eNodeB is triggered to send a ReportCGI
MESConfig to UE of UTRAN cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.13 C373474946
Counter Name
Number of Successful ReportCGI by Period between LTE and UTRAN
Short Name
SON.ANR.InterUtran.ReportCGISucc
Counter Description
When the eNodeB receives the 'ReportCGI' MeasurementReport message about UTRAN
cell from the UE,it is added to the counter.
Triggering Point
When the eNodeB receives the 'ReportCGI' MeasurementReport message about UTRAN
cell from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the 'ReportCGI'
MeasurementReport message about UTRAN cell from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-45
Unit
times
5.3.3.14 C373474947
Counter Name
Number of Report Neighbor Relation Addition to OMC between LTE and UTRAN
Short Name
SON.ANR.InterUtran.ReportNeibRela
Counter Description
When the eNodeB sends the NeighbourRelation Adding message of UTRAN cell to the
OMC,it is added to the counter.
Triggering Point
When the eNodeB sends the NeighbourRelation Adding message of UTRAN cell to the
OMC.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB sends the NeighbourRelation Adding
message of UTRAN cell to the OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.15 C373474948
Counter Name
Number of Different Detect Cell between LTE and CDMA
Short Name
SON.ANR.InterCdma.DeteUnkownCell
5-46
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
different LTE unknown PCIs are detected.
Refer to .
Update Description
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different LTE unknown PCIs
are detected.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.16 C373474949
Counter Name
Number of Report Detect Cell between LTE and CDMA
Short Name
SON.ANR.InterCdma.DeteReportCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected.
Refer to .
5-47
Update Description
The counter is incremented by 1 when the eNodeB receives the MeasurementReport
message from the UE in which the LTE unknown PCIs are detected.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.17 C373474950
Counter Name
Number of ReportCGI by UE between LTE and CDMA
Short Name
SON.ANR.InterCdma.ReportCGIByUE
Counter Description
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of CDMA cell,it is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of CDMA cell.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to UE which purpose is ReportCGI of CDMA
cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-48
Unit
times
5.3.3.18 C373474951
Counter Name
Number of ReportCGI by Period between LTE and CDMA
Short Name
SON.ANR.InterCdma.SendReportCGI
Counter Description
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of CDMA cell,it is
added to the counter.
Triggering Point
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of CDMA cell.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB is triggered to send a ReportCGI
MESConfig to UE of CDMA cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.19 C373474952
Counter Name
Number of Successful ReportCGI by Period between LTE and CDMA
Short Name
SON.ANR.InterCdma.ReportCGISucc
5-49
Counter Description
When the eNodeB receives the 'ReportCGI' MeasurementReport message about CDMA
cell from the UE,it is added to the counter.
Triggering Point
When the eNodeB receives the 'ReportCGI' MeasurementReport message about CDMA
cell from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the 'ReportCGI'
MeasurementReport message about CDMA cell from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.20 C373474953
Counter Name
Number of Report Neighbor Relation Addition to OMC between LTE and CDMA
Short Name
SON.ANR.InterCdma.ReportNeibRela
Counter Description
When the eNodeB sends the NeighbourRelation Adding message of CDMA cell to the
OMC,it is added to the counter.
Triggering Point
When the eNodeB sends the NeighbourRelation Adding message of CDMA cell to the
OMC.
Refer to .
5-50
Update Description
The counter is incremented by 1 When the eNodeB sends the NeighbourRelation Adding
message of CDMA cell to the OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.21 C373474954
Counter Name
Number of Different Detect Cell between LTE and GSM
Short Name
SON.ANR.InterGsm.DeteUnkownCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
different LTE unknown PCIs are detected.
Refer to .
Update Description
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different LTE unknown PCIs
are detected.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-51
Unit
times
5.3.3.22 C373474955
Counter Name
Number of Report Detect Cell between LTE and GSM
Short Name
SON.ANR.InterGsm.DeteReportCell
Counter Description
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected,it is added to the counter.
Triggering Point
When the eNodeB receives the MeasurementReport message from the UE in which the
LTE unknown PCIs are detected.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the MeasurementReport
message from the UE in which the LTE unknown PCIs are detected.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.23 C373474956
Counter Name
Number of ReportCGI by UE between LTE and GSM
Short Name
SON.ANR.InterGsm.ReportCGIByUE
5-52
Counter Description
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of GSM cell,it is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to UE which
purpose is ReportCGI of GSM cell.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to UE which purpose is ReportCGI of GSM
cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.24 C373474957
Counter Name
Number of ReportCGI by Period between LTE and GSM
Short Name
SON.ANR.InterGsm.SendReportCGI
Counter Description
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of GSM cell,it is
added to the counter.
Triggering Point
When the eNodeB is triggered to send a ReportCGI MESConfig to UE of GSM cell.
Refer to .
5-53
Update Description
The counter is incremented by 1 when the eNodeB is triggered to send a ReportCGI
MESConfig to UE of GSM cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.25 C373474958
Counter Name
Number of Successful ReportCGI by Period between LTE and GSM
Short Name
SON.ANR.InterGsm.ReportCGISucc
Counter Description
When the eNodeB receives the 'ReportCGI' MeasurementReport message about GSM
cell from the UE,it is added to the counter.
Triggering Point
When the eNodeB receives the 'ReportCGI' MeasurementReport message about GSM
cell from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the 'ReportCGI'
MeasurementReport message about GSM cell from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-54
Unit
times
5.3.3.26 C373474959
Counter Name
Number of Report Neighbor Relation Addition to OMC between LTE and GSM
Short Name
SON.ANR.InterGsm.ReportNeibRela
Counter Description
When the eNodeB sends the NeighbourRelation Adding message of GSM cell to the
OMC,it is added to the counter.
Triggering Point
When the eNodeB sends the NeighbourRelation Adding message of GSM cell to the OMC.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB sends the NeighbourRelation Adding
message of GSM cell to the OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.27 C373474960
Counter Name
Number of Successful Normal Neighbor Cell Addition intra RAT
Short Name
-
5-55
Counter Description
When the eNodeB reported neighbor relation of LTE cell to the OMC,and the neighbor
relation added successful,it is added to the counter.
Triggering Point
When the eNodeB reported neighbor relation of LTE cell to the OMC,and the neighbor
relation added successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation of LTE cell
to the OMC,and the neighbor relation added successful.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.28 C373474961
Counter Name
Number of Successful Handover to Temporary Neighbor Cell intra RAT
Short Name
-
Counter Description
When the UE handover to the LTE temporary neighbor cell successfully,it is added to the
counter.
Triggering Point
When the UE handover to the LTE temporary neighbor cell successfully.
Refer to .
5-56
Update Description
The counter is incremented by 1 when the UE handover to the LTE temporary neighbor
cell successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.29 C373474962
Counter Name
Number of Failed Handover to Temporary Neighbor Cell intra RAT
Short Name
-
Counter Description
When the UE handover to the LTE temporary neighbor cell failed,it is added to the counter.
Triggering Point
When the UE handover to the LTE temporary neighbor cell failed.
Refer to .
Update Description
The counter is incremented by 1 when the UE handover to the LTE temporary neighbor
cell failed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-57
5.3.3.30 C373474963
Counter Name
Number of Report Neighbor Relation Deletion to OMC intra RAT
Short Name
-
Counter Description
When the eNodeB reported neighbour relation deleting message of LTE cell to the OMC,it
is added to the counter.
Triggering Point
When the eNodeB reported neighbour relation deleting message of LTE cell to the OMC.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbour relation deleting
message of LTE cell to the OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.31 C373474964
Counter Name
Number of Successfully Deleted Normal Neighbor Cell intra RAT
Short Name
-
Counter Description
When the eNodeB reported neighbor relation deletion of LTE cell to the OMC,and the
neighbor relation deleted successful,it is added to the counter.
5-58
Triggering Point
When the eNodeB reported neighbor relation deletion of LTE cell to the OMC,and the
neighbor relation deleted successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation deletion of
LTE cell to the OMC,and the neighbor relation deleted successful.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.32 C373474965
Counter Name
Number of Successful Addition of Normal Neighbor Cell between LTE and UTRAN
Short Name
-
Counter Description
When the eNodeB reported neighbor relation of UTRAN cell to the OMC,and the neighbor
relation added successful,it is added to the counter.
Triggering Point
When the eNodeB reported neighbor relation of UTRAN cell to the OMC,and the neighbor
relation added successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation of UTRAN
cell to the OMC,and the neighbor relation added successful.
5-59
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.33 C373474966
Counter Name
Number of Successful Handover to Temporary Neighbor Cell between LTE and UTRAN
Short Name
-
Counter Description
When the UE handover to the UTRAN temporary neighbor cell successfully,it is added to
the counter.
Triggering Point
When the UE handover to the UTRAN temporary neighbor cell successfully.
Refer to .
Update Description
The counter is incremented by 1 when the UE handover to the UTRAN temporary neighbor
cell successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-60
5.3.3.34 C373474967
Counter Name
Number of Failed Handover to Temporary Neighbor Cell between LTE and UTRAN
Short Name
-
Counter Description
When the UE handover to the UTRAN temporary neighbor cell failed,it is added to the
counter.
Triggering Point
When the UE handover to the UTRAN temporary neighbor cell failed.
Refer to .
Update Description
The counter is incremented by 1 when the UE handover to the UTRAN temporary neighbor
cell failed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.35 C373474968
Counter Name
Number of Report Neighbor Relation Deletion to OMC between LTE and UTRAN
Short Name
-
Counter Description
When the eNodeB reported neighbour relation deleting message of UTRAN cell to the
OMC,it is added to the counter.
5-61
Triggering Point
When the eNodeB reported neighbour relation deleting message of UTRAN cell to the
OMC.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbour relation deleting
message of UTRAN cell to the OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.36 C373474969
Counter Name
Number of Successfully Deleted Normal Neighbor Cell between LTE and UTRAN
Short Name
-
Counter Description
When the eNodeB reported neighbor relation deletion of UTRAN cell to the OMC,and the
neighbor relation deleted successful,it is added to the counter.
Triggering Point
When the eNodeB reported neighbor relation deletion of UTRAN cell to the OMC,and the
neighbor relation deleted successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation deletion of
UTRAN cell to the OMC,and the neighbor relation deleted successful.
5-62
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.37 C373474970
Counter Name
Number of Successful Addition of Normal Neighbor Cell between LTE and CDMA
Short Name
-
Counter Description
When the eNodeB reported neighbor relation of CDMA cell to the OMC,and the neighbor
relation added successful,it is added to the counter.
Triggering Point
When the eNodeB reported neighbor relation of CDMA cell to the OMC,and the neighbor
relation added successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation of CDMA
cell to the OMC,and the neighbor relation added successful.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-63
5.3.3.38 C373474971
Counter Name
Number of Successful Handover to Temporary Neighbor Cell between LTE and CDMA
Short Name
-
Counter Description
When the UE handover to the CDMA temporary neighbor cell successfully,it is added to
the counter.
Triggering Point
When the UE handover to the CDMA temporary neighbor cell successfully.
Refer to .
Update Description
The counter is incremented by 1 when the UE handover to the CDMA temporary neighbor
cell successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.39 C373474972
Counter Name
Number of Failed Handover to Temporary Neighbor Cell between LTE and CDMA
Short Name
-
Counter Description
When the UE handover to the CDMA temporary neighbor cell failed,it is added to the
counter.
5-64
Triggering Point
When the UE handover to the CDMA temporary neighbor cell failed.
Refer to .
Update Description
The counter is incremented by 1 when the UE handover to the CDMA temporary neighbor
cell failed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.40 C373474973
Counter Name
Number of Report Neighbor Relation Deletion to OMC between LTE and CDMA
Short Name
-
Counter Description
When the eNodeB reported neighbour relation deleting message of CDMA cell to the
OMC,it is added to the counter.
Triggering Point
When the eNodeB reported neighbour relation deleting message of CDMA cell to the OMC.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbour relation deleting
message of CDMA cell to the OMC.
Counter Type
Accumulated value
5-65
Sampling Period
Event triggered
Unit
times
5.3.3.41 C373474974
Counter Name
Number of Successfully Deleted Normal Neighbor Cell between LTE and CDMA
Short Name
-
Counter Description
When the eNodeB reported neighbor relation deletion of CDMA cell to the OMC,and the
neighbor relation deleted successful,it is added to the counter.
Triggering Point
When the eNodeB reported neighbor relation deletion of CDMA cell to the OMC,and the
neighbor relation deleted successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation deletion of
CDMA cell to the OMC,and the neighbor relation deleted successful.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.42 C373474975
Counter Name
Number of Successful Addition of Normal Neighbor Cell between LTE and GSM
5-66
Short Name
-
Counter Description
When the eNodeB reported neighbor relation of GSM cell to the OMC,and the neighbor
relation added successful,it is added to the counter.
Triggering Point
When the eNodeB reported neighbor relation of GSM cell to the OMC,and the neighbor
relation added successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation of GSM cell
to the OMC,and the neighbor relation added successful.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.43 C373474976
Counter Name
Number of Successful Handover to Temporary Neighbor Cell between LTE and GSM
Short Name
-
Counter Description
When the UE handover to the GSM temporary neighbor cell successfully,it is added to the
counter.
Triggering Point
When the UE handover to the GSM temporary neighbor cell successfully.
Refer to .
5-67
Update Description
The counter is incremented by 1 when the UE handover to the GSM temporary neighbor
cell successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.44 C373474977
Counter Name
Number of Failed Handover to Temporary Neighbor Cell between LTE and GSM
Short Name
-
Counter Description
When the UE handover to the GSM temporary neighbor cell failed,it is added to the counter.
Triggering Point
When the UE handover to the GSM temporary neighbor cell failed.
Refer to .
Update Description
The counter is incremented by 1 when the UE handover to the GSM temporary neighbor
cell failed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-68
5.3.3.45 C373474978
Counter Name
Number of Report Neighbor Relation Deletion to OMC between LTE and GSM
Short Name
-
Counter Description
When the eNodeB reported neighbour relation deleting message of GSM cell to the OMC,it
is added to the counter.
Triggering Point
When the eNodeB reported neighbour relation deleting message of GSM cell to the OMC.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbour relation deleting
message of GSM cell to the OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.46 C373474979
Counter Name
Number of Successfully Deleted Normal Neighbor Cell between LTE and GSM
Short Name
-
Counter Description
When the eNodeB reported neighbor relation deletion of GSM cell to the OMC,and the
neighbor relation deleted successful,it is added to the counter.
5-69
Triggering Point
When the eNodeB reported neighbor relation deletion of GSM cell to the OMC,and the
neighbor relation deleted successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reported neighbor relation deletion of
GSM cell to the OMC,and the neighbor relation deleted successful.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.47 C373474980
Counter Name
Number of Temporary Neighbor Cell intra RAT
Short Name
-
Counter Description
When the number of temporary neighbor cell intra RAT is altered,it is modified the counter.
Triggering Point
When the number of temporary neighbor cell intra RAT is altered.
Refer to .
Update Description
The counter is modified when the number of temporary neighbor cell intra RAT is altered.
Counter Type
Current value
5-70
Sampling Period
Event triggered
Unit
unit
5.3.3.48 C373474981
Counter Name
Number of Temporary Neighbor Cell between LTE and UTRAN
Short Name
-
Counter Description
When the number of temporary neighbor cell between LTE and UTRAN is altered,it is
modified the counter.
Triggering Point
When the number of temporary neighbor cell between LTE and UTRAN is altered.
Refer to .
Update Description
The counter is modified when the number of temporary neighbor cell between LTE and
UTRAN is altered.
Counter Type
Current value
Sampling Period
Event triggered
Unit
unit
5.3.3.49 C373474982
Counter Name
Number of Temporary Neighbor Cell between LTE and CDMA
5-71
Short Name
-
Counter Description
When the number of temporary neighbor cell between LTE and CDMA is altered,it is
modified the counter.
Triggering Point
When the number of temporary neighbor cell between LTE and CDMA is altered.
Refer to .
Update Description
The counter is modified when the number of temporary neighbor cell between LTE and
CDMA is altered.
Counter Type
Current value
Sampling Period
Event triggered
Unit
unit
5.3.3.50 C373474983
Counter Name
Number of Temporary Neighbor Cell between LTE and GSM
Short Name
-
Counter Description
When the number of temporary neighbor cell between LTE and GSM is altered, it is
modified the counter.
Triggering Point
When the number of temporary neighbor cell between LTE and GSM is altered.
Refer to .
5-72
Update Description
The counter is modified when the number of temporary neighbor cell between LTE and
GSM is altered.
Counter Type
Current value
Sampling Period
Event triggered
Unit
unit
5.3.3.51 C373474984
Counter Name
Number of not Meeting Normal Neighbour Relation Addition Condition intra RAT
Short Name
-
Counter Description
The counter provides the number of intra-RAT temporary neighbour relation which not
meet the normal neighbour relation addition condition intra RAT.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation can't meet the normal neighbour relation addition condition intra RAT.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result
of the intra-RAT temporary neighbour relation can't meet the normal neighbour relation
addition condition intra RAT.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-73
Unit
times
5.3.3.52 C373474985
Counter Name
Number of not Sending Normal Neighbour Relation Addition Request because of Full intra
RAT
Short Name
-
Counter Description
The counter provides the number of not sending intra-RAT ANR neighbour relation addition
request because of that the normal neighbour relation list is full intra RAT.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation meets the normal neighbour relation addition condition, but the eNodeB
does not send addition request because of that the normal neighbour relation list is full
intra RAT.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result of
the intra-RAT temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that the normal
neighbour relation list is full intra RAT.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-74
5.3.3.53 C373474986
Counter Name
Number of not Meeting Normal Neighbour Relation Addition Condition between LTE and
UTRAN
Short Name
-
Counter Description
The counter provides the number of intra-RAT temporary neighbour relation which not
meet the normal neighbour relation addition condition between LTE and UTRAN.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation can't meet the normal neighbour relation addition condition between
LTE and UTRAN.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result
of the intra-RAT temporary neighbour relation can't meet the normal neighbour relation
addition condition between LTE and UTRAN.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.54 C373474987
Counter Name
Number of not Sending Normal Neighbour Relation Addition Request because of Full
between LTE and UTRAN
5-75
Short Name
-
Counter Description
The counter provides the number of not sending intra-RAT ANR neighbour relation addition
request because of that the normal neighbour relation list is full between LTE and UTRAN.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation meets the normal neighbour relation addition condition, but the eNodeB
does not send addition request because of that the normal neighbour relation list is full
between LTE and UTRAN.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result of
the intra-RAT temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that the normal
neighbour relation list is full between LTE and UTRAN.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.55 C373474988
Counter Name
Number of not Meeting Normal Neighbour Relation Addition Condition between LTE and
CDMA
Short Name
-
5-76
Counter Description
The counter provides the number of intra-RAT temporary neighbour relation which not
meet the normal neighbour relation addition condition between LTE and CDMA.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation can't meet the normal neighbour relation addition condition between
LTE and CDMA.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result
of the intra-RAT temporary neighbour relation can't meet the normal neighbour relation
addition condition between LTE and CDMA.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.56 C373474989
Counter Name
Number of not Sending Normal Neighbour Relation Addition Request because of Full
between LTE and CDMA
Short Name
-
Counter Description
The counter provides the number of not sending intra-RAT ANR neighbour relation addition
request because of that the normal neighbour relation list is full between LTE and CDMA.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation meets the normal neighbour relation addition condition, but the eNodeB
5-77
does not send addition request because of that the normal neighbour relation list is full
between LTE and CDMA.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result of
the intra-RAT temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that the normal
neighbour relation list is full between LTE and CDMA.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.57 C373474990
Counter Name
Number of not Meeting Normal Neighbour Relation Addition Condition between LTE and
GSM
Short Name
-
Counter Description
The counter provides the number of intra-RAT temporary neighbour relation which not
meet the normal neighbour relation addition condition between LTE and GSM.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation can't meet the normal neighbour relation addition condition between
LTE and GSM.
Refer to .
5-78
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result
of the intra-RAT temporary neighbour relation can't meet the normal neighbour relation
addition condition between LTE and GSM.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.58 C373474991
Counter Name
Number of not Sending Normal Neighbour Relation Addition Request because of Full
between LTE and GSM
Short Name
-
Counter Description
The counter provides the number of not sending intra-RAT ANR neighbour relation addition
request because of that the normal neighbour relation list is full between LTE and GSM.
Triggering Point
When the statistic duration is end and the statistic result of the intra-RAT temporary
neighbour relation meets the normal neighbour relation addition condition, but the eNodeB
does not send addition request because of that the normal neighbour relation list is full
between LTE and GSM.
Refer to .
Update Description
The counter is incremented by 1 when the statistic duration is end and the statistic result of
the intra-RAT temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that the normal
neighbour relation list is full between LTE and GSM.
5-79
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.59 C373692700
Counter Name
Number of intra-freq Neighbour Cell Reported by UE
Short Name
SON.ANR.IntraFreqNeibReport
Counter Description
The counter provides the number of intra-frequence neighbour cell reported by UE.
Triggering Point
When a LTE intra-frequence neighbour cell reported by UE in the MeasurementReport for
handover.
Refer to .
Update Description
The counter is incremented by 1 when a LTE intra-frequence neighbour cell reported by
UE in the MeasurementReport for handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-80
5.3.3.60 C373692701
Counter Name
Number of inter-freq Neighbour Cell Reported by UE
Short Name
SON.ANR.InterFreqNeibReport
Counter Description
The counter provides the number of inter-frequence neighbour cell reported by UE.
Triggering Point
When a LTE inter-frequence neighbour cell reported by UE in the MeasurementReport for
handover.
Refer to .
Update Description
The counter is incremented by 1 when a LTE inter-frequence neighbour cell reported by
UE in the MeasurementReport for handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.61 C373692702
Counter Name
Number of inter-RAT(LTE->UTRAN)Neighbour Cell Reported by UE
Short Name
SON.ANR.UmstLteNeibReport
Counter Description
The counter provides the number of UTRAN neighbour cell reported by UE.
5-81
Triggering Point
When a UTRAN neighbour cell reported by UE in the MeasurementReport for handover.
Refer to .
Update Description
The counter is incremented by 1 when a UTRAN neighbour cell reported by UE in the
MeasurementReport for handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.62 C373692703
Counter Name
Number of inter-RAT(LTE->CDMA)Neighbour Cell Reported by UE
Short Name
SON.ANR.CdmaLteNeibReport
Counter Description
The counter provides the number of CDMA neighbour cell reported by UE.
Triggering Point
When a CDMA neighbour cell reported by UE in the MeasurementReport for handover.
Refer to .
Update Description
The counter is incremented by 1 when a CDMA neighbour cell reported by UE in the
MeasurementReport for handover.
Counter Type
Accumulated value
5-82
Sampling Period
Event triggered
Unit
times
5.3.3.63 C373692704
Counter Name
Number of inter-RAT(LTE->GSM)Neighbour Cell Reported by UE
Short Name
SON.ANR.GsmLteNeibReport
Counter Description
The counter provides the number of GSM neighbour cell reported by UE.
Triggering Point
When a GSM neighbour cell reported by UE in the MeasurementReport for handover.
Refer to .
Update Description
The counter is incremented by 1 when a GSM neighbour cell reported by UE in the
MeasurementReport for handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.64 C373723013
Counter Name
Number of PCI Conflict(Cell Pair)
5-83
Short Name
-
Counter Description
When the eNodeB detects that the neighbour's PCI is the same to the serving cell ,it is
added to the counter.
Triggering Point
When the eNodeB detects that the neighbour's PCI is the same to the serving cell
Refer to .
Update Description
When the eNodeB detects that the neighbour's PCI is the same to the serving cell ,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.65 C373723014
Counter Name
Number of PCI Confusion(Cell Pair)
Short Name
-
Counter Description
When the eNodeB detects that the two neighbours' PCI is the same ,it is added to the
counter.
Triggering Point
When the eNodeB detects that the two neighbours' PCI is the same.
Refer to .
5-84
Update Description
When the eNodeB detects that the two neighbours' PCI is the same,the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.66 C373990492
Counter Name
The total number of request that removing redundancy adjacent LTE cell.
Short Name
-
Counter Description
eNB opens SON neighbor cell relationship management function.eNB will find out the
redundancy adjacent LTE cell after the network working for a period of time, and request
OMC to remove the redundancy adjacent LTE cell automatically. The counter is the total
number of request that removing redundancy adjacent LTE cell.
Triggering Point
eNB sends the request of removing adjacent LTE cell to OMC.
Refer to .
Update Description
The counter is incremented by 1 when the eNB sends the request of removing adjacent
LTE cell to OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-85
Unit
times
5.3.3.67 C373990493
Counter Name
The total number of removing redundancy adjacent LTE cell successfully.
Short Name
-
Counter Description
eNB opens SON neighbor cell relationship management function.eNB will find out the
redundancy adjacent LTE cell after the network working for a period of time, and request
OMC to remove the redundancy adjacent LTE cell automatically. The counter is the total
number of request that removing redundancy adjacent LTE cell.If OMC removing adjacent
LTE cell successfully, the couter add 1.
Triggering Point
OMC synchronizes the configuration of removing redundancy adjacent LTE cell to eNB
successfully.
Refer to .
Update Description
The counter is incremented by 1 when the OMC synchronizes the configuration of
removing redundancy adjacent LTE cell to eNB successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.68 C373990494
Counter Name
The total number of request that removing redundancy adjacent UTRAN cell.
5-86
Short Name
-
Counter Description
eNB opens SON neighbor cell relationship management function.eNB will find out the
redundancy adjacent UTRAN cell after the network working for a period of time, and
request OMC to remove the redundancy adjacent UTRAN cell automatically. The counter
is the total number of request that removing redundancy adjacent LTE cell.
Triggering Point
eNB sends the request of removing adjacent UTRAN cell to OMC.
Refer to .
Update Description
The counter is incremented by 1 when the eNB sends the request of removing adjacent
UTRAN cell to OMC.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.69 C373990495
Counter Name
The total number of removing redundancy adjacent UTRAN cell successfully.
Short Name
-
Counter Description
eNB opens SON neighbor cell relationship management function.eNB will find out the
redundancy adjacent UTRAN cell after the network working for a period of time, and
request OMC to remove the redundancy adjacent UTRAN cell automatically. The counter
is the total number of request that removing redundancy adjacent LTE cell.If OMC
removing adjacent LTE cell successfully, the couter add 1.
5-87
Triggering Point
OMC synchronizes the configuration of removing redundancy adjacent UTRAN cell to eNB
successfully.
Refer to .
Update Description
OMC synchronizes the configuration of removing redundancy adjacent UTRAN cell to eNB
successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.70 C373990496
Counter Name
The total number of request that removing redundancy adjacent GSM cell.
Short Name
-
Counter Description
eNB opens SON neighbor cell relationship management function.eNB will find out the
redundancy adjacent GSM cell after the network working for a period of time, and request
OMC to remove the redundancy adjacent GSM cell automatically. The counter is the total
number of request that removing redundancy adjacent LTE cell.
Triggering Point
eNB sends the request of removing adjacent GSM cell to OMC.
Refer to .
Update Description
eNB sends the request of removing adjacent GSM cell to OMC.
5-88
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.3.3.71 C373990497
Counter Name
The total number of removing redundancy adjacent GSM cell successfully.
Short Name
-
Counter Description
eNB opens SON neighbor cell relationship management function.eNB will find out the
redundancy adjacent GSM cell after the network working for a period of time, and request
OMC to remove the redundancy adjacent GSM cell automatically. The counter is the total
number of request that removing redundancy adjacent LTE cell.If OMC removing adjacent
LTE cell successfully, the couter add 1.
Triggering Point
OMC synchronizes the configuration of removing redundancy adjacent GSM cell to eNB
successfully.
Refer to .
Update Description
The counter is incremented by 1 when the OMC synchronizes the configuration of
removing redundancy adjacent GSM cell to eNB successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
5-89
Unit
times
Counter Name
Number of Getting Remote IP
Short Name
SON.X2Self.AuGetIP
Counter Description
The eNodeB initiates getting the remote IP for X2 self setup,it is added to the counter.
5-90
Triggering Point
When the eNodeB initiates getting the remote IP.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB initiates getting the remote IP.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.2 C373990481
Counter Name
Number of Getted Remote IP
Short Name
SON.X2Self.GotIP
Counter Description
The eNodeB gets the remote IP for X2 self setup initiated by the remote eNodeB,it is added
to the counter.
Triggering Point
When the eNodeB getted the remote IP passively.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB getted the remote IP passively.
Counter Type
Accumulated value
5-91
Sampling Period
Event triggered
Unit
times
5.4.3.3 C373990482
Counter Name
Number of Successful Getted Remote IP
Short Name
SON.X2Self.GetIPSucc
Counter Description
The eNodeB gets the remote IP for X2 self successfully,it is added to the counter.
Triggering Point
When the eNodeB gets the remote IP successfully.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB gets the remote IP successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.4 C373990483
Counter Name
Number of Not Enough X2 SCTP
5-92
Short Name
SON.X2Self.ConfigFull
Counter Description
The number of the X2 SCTP reached the maximum,it is added to the counter.
Triggering Point
When the eNodeB haven't enough X2 SCTP.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB haven't enough X2 SCTP.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.5 C373990486
Counter Name
Number of X2 Self Setup Initiation
Short Name
-
Counter Description
The eNodeB initiates the X2 self setup after configurating the relationship with the
neighbour cell,it is added to the counter.
Triggering Point
When the eNodeB initiates the X2 self setup.
Refer to .
5-93
Update Description
The counter is incremented by 1 when the eNodeB initiates the X2 self setup.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.6 C373990487
Counter Name
Number of Successful X2 Self Setup
Short Name
-
Counter Description
The eNodeB initiates the X2 self setup successfully,it is added to the counter.
Triggering Point
When the eNodeB initiates the X2 self setup successfully.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB initiates the X2 self setup successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-94
5.4.3.7 C373990488
Counter Name
Number of X2 Self Delete Initiation(Exclude Scan of the Invalid X2 SCTP)
Short Name
-
Counter Description
The eNodeB detects no relationship with neighbour cell,or content the X2 self deletion
condition,it is added to the counter.
Triggering Point
When the eNodeB detects no relationship with neighbour cell,or content the X2 self
deletion condition.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB detects no relationship with neighbour
cell,or content the X2 self deletion condition.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.8 C373990489
Counter Name
Number of Successful X2 Self Delete(Exclude Scan of the Invalid X2 SCTP)
Short Name
-
5-95
Counter Description
The eNodeB deletes the X2 SCTP successfully for non scanning of the invalid X2 SCTP,it
is added to the counter.
Triggering Point
When the eNodeB deletes the X2 SCTP successfully for non scanning of the invalid X2
SCTP.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB deletes the X2 SCTP successfully for
non scanning of the invalid X2 SCTP.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.9 C373990490
Counter Name
Number of Report Invalid X2 SCTP Self Delete
Short Name
-
Counter Description
The eNodeB detects the invalid X2 SCTP,it is added to the counter.
Triggering Point
When the eNodeB detects the invalid X2 SCTP.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB detects the invalid X2 SCTP.
5-96
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5.4.3.10 C373990491
Counter Name
Number of Successful Invalid X2 SCTP Self Delete
Short Name
-
Counter Description
The eNodeB deletes the X2 SCTP successfully for scanning of the invalid X2 SCTP,it is
added to the counter.
Triggering Point
When the eNodeB deletes the X2 SCTP successfully for scanning of the invalid X2 SCTP.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB deletes the X2 SCTP successfully for
scanning of the invalid X2 SCTP.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
5-97
5-98
6-1
Short Name
-
Counter Description
This counter counts the sum of uplink RB number allocated to SDMA assisted users.
Triggering Point
When the eNodeB schedules uplink SDMA assisted users, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink SDMA assisted users, this counter is incremented by
the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.2 C373596929
Counter Name
DL Scheduled RB Number for SDMA Assisted User
Short Name
-
6-2
Counter Description
This counter counts the sum of downlink RB number allocated to SDMA assisted users.
Triggering Point
When the eNodeB schedules downlink SDMA assisted users, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules downlink SDMA assisted users, this counter is incremented
by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.3 C373596930
Counter Name
UL SDMA Assisted User Number
Short Name
-
Counter Description
This counter counts the total number of times that SDMA assisted users are scheduled in
uplink.
Triggering Point
When the eNodeB schedules uplink SDMA assisted users, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink SDMA assisted users, this counter is incremented by
one.
6-3
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.4 C373596931
Counter Name
DL SDMA Assisted User Number
Short Name
-
Counter Description
This counter counts the total number of times that SDMA assisted users are scheduled in
downlink.
Triggering Point
When the eNodeB schedules downlink SDMA assisted users, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules downlink SDMA assisted users, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6-4
6.3.5 C374037300
Counter Name
Average CP UL PHY Throughput
Short Name
-
Counter Description
In the case of super cell networking, this counter counts the average uplink CP PHY
throughput. The sampling period is one second and this counter is updated to the average
value of all the samples in 15 minutes.
Triggering Point
In the case of super cell networking, when the eNodeB PHY layer receives data from the
air interface, this counter is updated based on CPs.
Refer to .
Update Description
This counter is updated to the average value of all the samples in 15 minutes.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
6.3.6 C374037301
Counter Name
Average CP DL PHY Throughput
Short Name
-
6-5
Counter Description
In the case of super cell networking, this counter counts the average downlink CP PHY
throughput. The sampling period is one second and this counter is updated to the average
value of all the samples in 15 minutes.
Triggering Point
In the case of super cell networking, when the eNodeB PHY layer sends data, this counter
is updated based on CPs.
Refer to .
Update Description
This counter is updated to the average value of all the samples in 15 minutes.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
6.3.7 C374037302
Counter Name
Total Number of CP UL Scheduled User
Short Name
-
Counter Description
In the case of super cell networking, this counter counts the total number of uplink
scheduled CP users in a statistics granularity. The number is counted during HARQ
processes and the statistics moment is the same as that of the uplink CMAC transmission
duration.
Triggering Point
In the case of super cell networking, the eNodeB uplink scheduler collects the total number
of scheduled uplink users in a granularity. This counter is updated based on CPs.
Refer to .
6-6
Update Description
In each measurement period, this counter is updated to the sum of all the samples.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.8 C374037303
Counter Name
Total Number of CP DL Scheduled User
Short Name
-
Counter Description
In the case of super cell networking, this counter counts the total number of downlink
scheduled CP users in a statistics granularity. The number is counted during HARQ
processes and the statistics moment is the same as that of the downlink CMAC
transmission duration.
Triggering Point
In the case of super cell networking, the eNodeB uplink scheduler collects the total number
of downlink scheduled users in a granularity. This counter is updated based on CPs.
Refer to .
Update Description
In each measurement period, this counter is updated to the sum of all the samples.
Counter Type
Accumulated value
Sampling Period
15 min
6-7
Unit
unit
6.3.9 C374037304
Counter Name
CP UL Scheduled TTI Number
Short Name
-
Counter Description
In the case of super cell networking, this counter counts the number of TTIs that the CP
CMAC has data to be scheduled. The eNodeB uplink scheduler schedules data each, this
counter is incremented by one, including TTIs for retransmitted TB scheduling.
Triggering Point
In the case of super cell networking, when the eNodeB uplink scheduler has data to be
scheduled, this counter is updated based on CPs.
Refer to .
Update Description
When the eNodeB uplink scheduler has data to be scheduled, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.10 C374037305
Counter Name
CP DL Scheduled TTI Number
6-8
Short Name
-
Counter Description
In the case of super cell networking, this counter counts the number of TTIs that the CP
CMAC has data to be scheduled. The eNodeB downlink scheduler schedules data each,
this counter is incremented by one, including TTIs for retransmitted TB scheduling.
Triggering Point
In the case of super cell networking, when the eNodeB downlink scheduler has data to be
scheduled, this counter is updated based on CPs.
Refer to .
Update Description
When the eNodeB downlink scheduler has data to be scheduled, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.11 C374037306
Counter Name
CP PRB Number Used on PUSCH Channel
Short Name
-
Counter Description
In the case of super cell networking, when the eNodeB uplink scheduler schedules uplink
services, it allocates available PRBs for the PUSCH. This counter indicates the number of
PRBs actually occupied by the PUSCH on each CP.
6-9
Triggering Point
In the case of super cell networking, when the eNodeB uplink scheduler has PUSCH data
to be scheduled and allocates PRBs, this counter is updated based on CPs.
Refer to .
Update Description
When the eNodeB uplink scheduler has PUSCH data to be scheduled and allocates PRBs,
this counter is incremented by the number of allocated PRBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.12 C374037307
Counter Name
CP PRB Number Used on PDSCH Channel
Short Name
-
Counter Description
In the case of super cell networking, when the eNodeB downlink scheduler schedules
downlink services, it allocates available PRBs for the PDSCH. This counter indicates the
number of PRBs actually occupied by the PDSCH on each CP.
Triggering Point
In the case of super cell networking, when the eNodeB downlink scheduler has PDSCH
data to be scheduled and allocates PRBs, this counter is updated based on CPs.
Refer to .
Update Description
When the eNodeB downlink scheduler has PDSCH data to be scheduled and allocates
PRBs, this counter is incremented by the number of allocated PRBs.
6-10
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6.3.13 C374037308
Counter Name
CP CCE Number Used on PDCCH Channel
Short Name
-
Counter Description
In the case of super cell networking, this counter counts the number of CCEs actually
allocated to the PDCCH by the CP CMAC. This counter includes DCI0, DCI1, DCI1A, and
DCI2. The total number of CCEs in a sampling period is reported.
Triggering Point
In the case of super cell networking, when the eNodeB downlink scheduler has PDCCH
data to be scheduled and allocates CCEs, this counter is updated based on CPs.
Refer to .
Update Description
When the eNodeB downlink scheduler has PDCCH data to be scheduled and allocates
CCEs, this counter is incremented by the number of allocated CCEs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
6-11
6-12
7-1
Short Name
-
Counter Description
This counter counts the number of downlink RBs scheduled for SCC CA UEs in a cell.
Triggering Point
When the eNodeB schedules SCC CA UEs, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules SCC CA UEs, this counter is incremented by the number of
allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
7.3.2 C373596933
Counter Name
DL Scheduled TB Number for SCC UE
Short Name
-
Counter Description
This counter counts the number of downlink TBs scheduled for SCC UEs in a cell. Each
TB is scheduled, this counter is incremented by one.
Triggering Point
When the eNodeB schedules SCC CA UEs, this counter is updated.
Refer to .
7-2
Update Description
When the eNodeB schedules SCC CA UEs, this counter is incremented by the number of
scheduled TBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
7.3.3 C373596934
Counter Name
DL Scheduled TB Size for SCC UE
Short Name
-
Counter Description
This counter counts the downlink TBSize scheduled for SCC UEs in a cell.
Triggering Point
When the eNodeB schedules SCC CA UEs, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules SCC CA UEs, this counter is incremented by the scheduled
TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
7-3
Unit
Kbit
7.3.4 C373596951
Counter Name
DL Scheduled RB Number for PCC UE
Short Name
-
Counter Description
This counter counts the number of RBs occupied by PCC UEs in a cell.
Triggering Point
When the eNodeB schedules PCC UEs, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules PCC UEs, this counter is incremented by the number of
allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
7.3.5 C373596952
Counter Name
DL Scheduled TB Number for PCC UE
Short Name
-
7-4
Counter Description
This counter counts the number of TBs scheduled by PCC CA UEs in a cell. It is
incremented by one when a TB is scheduled.
Triggering Point
When the eNodeB schedules PCC UEs, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules PCC UEs, this counter is incremented by the number of
scheduled TBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
7.3.6 C373596953
Counter Name
DL Scheduled TB Size for PCC UE
Short Name
-
Counter Description
This counter counts the Tbsize scheduled by PCC UEs in a cell.
Triggering Point
When the eNodeB schedules PCC UEs, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules PCC UEs, this counter is incremented by the scheduled
TBSize.
7-5
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
7.3.7 C373596958
Counter Name
Active Scell Number
Short Name
-
Counter Description
This counter indicates the total number of times of the carriers issued by CMAC being
activated by an MAC CE. If an MAC CE activates one or multiple secondary carriers
simultaneously, this counter counts for every secondary carrier.
Triggering Point
During a statistics period, when CMAC issues carriers, if an MAC CE activates one or
multiple secondary carriers simultaneously, this counter counts for every secondary carrier,
and accumulates the recorded numbers within the period.
Refer to .
Update Description
During a statistics period, when CMAC issues carriers, if an MAC CE activates one or
multiple secondary carriers simultaneously, this counter counts for every secondary carrier,
and accumulates the recorded numbers within the period.
Counter Type
Accumulated value
Sampling Period
1 ms
7-6
Unit
unit
7.3.8 C373596959
Counter Name
Active Scell Success Number
Short Name
-
Counter Description
This counter indicates the total number of times of receiving the ACK message when an
MAC CE activates a carrier, including the number of newly transmitted ACK messages
and the number of successfully retransmitted ACK messages.
Triggering Point
This counter indicates the total number of times of receiving the ACK message when
an MAC CE activates a carrier during a reporting period, including the number of newly
transmitted ACK messages and the number of successfully retransmitted ACK messages.
Refer to .
Update Description
During a statistics period, this counter counts the number of times of receiving the ACK
message when an MAC CE activates a carrier, including the number of newly transmitted
ACK messages and the number of successfully retransmitted ACK messages. The
recorded number of times within the period is accumulated.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
unit
7-7
7.3.9 C373596960
Counter Name
Deactive Scell Number
Short Name
-
Counter Description
This counter indicates the total number of times of the carriers issued by CMAC being
deactivated by an MAC CE. If an MAC CE deactivates one or multiple secondary carriers
simultaneously, this counter counts for every secondary carrier.
Triggering Point
During a statistics period, when CMAC issues carriers, if an MAC CE deactivates one or
multiple secondary carriers simultaneously, this counter counts for every secondary carrier,
and accumulates the recorded numbers within the period.
Refer to .
Update Description
During a statistics period, when CMAC issues carriers, if an MAC CE deactivates one or
multiple secondary carriers simultaneously, this counter counts for every secondary carrier,
and accumulates the recorded numbers within the period.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
unit
7.3.10 C373596961
Counter Name
Deactive Scell Success Number
Short Name
-
7-8
Counter Description
This counter indicates the total number of times of receiving the ACK message when an
MAC CE deactivates a carrier, including the number of newly transmitted ACK messages
and the number of successfully retransmitted ACK messages.
Triggering Point
This counter indicates the total number of times of receiving the ACK message when an
MAC CE deactivates a carrier during a reporting period, including the number of newly
transmitted ACK messages and the number of successfully retransmitted ACK messages.
Refer to .
Update Description
During a statistics period, this counter counts the number of times of receiving the
ACK message when an MAC CE deactivates a carrier, including the number of newly
transmitted ACK messages and the number of successfully retransmitted ACK messages.
The recorded number of times within the period is accumulated.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
unit
7-9
7-10
Short Name
-
Counter Description
In COMP mode, this counter counts the number of times that users are scheduled in
downlink through COMP in a cell. This counter is based on UEs, and is incremented
by one when a UE is scheduled in downlink through COMP.
8-1
Triggering Point
When the eNodeB schedules users in downlink through COMP, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users in downlink through COMP, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
8.3.2 C373596936
Counter Name
DL Scheduled RB Number for COMP Cooperation
Short Name
-
Counter Description
In COMP mode, this counter counts the number of downlink COMP UE RBs in a cell, which
used for cooperation with other cells.
Triggering Point
When the eNodeB schedules users in downlink through COMP, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users in downlink through COMP, this counter is incremented
by the number of cooperated RBs .
Counter Type
Accumulated value
8-2
Sampling Period
15 min
Unit
times
8.3.3 C373596937
Counter Name
UL Scheduled Number for COMP Cooperation
Short Name
-
Counter Description
In COMP mode, this counter counts the number of times that users are scheduled in uplink
through COMP in a cell. This counter is based on UEs, and is incremented by one when
a UE is scheduled in uplink through COMP.
Triggering Point
When the eNodeB schedules users in uplink through COMP, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users in uplink through COMP, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
8-3
8.3.4 C373596938
Counter Name
UL Scheduled RB Number for COMP Cooperation
Short Name
-
Counter Description
In COMP mode, this counter counts the number of uplink COMP UE RBs in a cell, which
used for cooperation with other cells.
Triggering Point
When the eNodeB schedules users in uplink through COMP, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users in uplink through COMP, this counter is incremented
by the number of cooperated RBs .
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
8-4
1 C373475011 Number of Energy Saving Cell Load satisfy Energy Saving intra RAT
2 C373475012 Number of Energy Saving Cell Shut Down Carrier Request intra RAT
3 C373475013 Number of Energy Saving Cell Shut Down Carrier Success intra RAT
4 C373475014 Number of Energy Saving Cell Receive Start up Carrier Notify intra RAT
5 C373475015 Number of Energy Saving Cell Start up Carrier Request intra RAT
6 C373475016 Number of Energy Saving Cell Start up Carrier Success intra RAT
7 C373475017 Number of Energy Saving Cell Load satisfy Energy Saving between LTE
and UTRAN
8 C373475018 Number of Energy Saving Cell Shut Down Carrier Request between LTE
and UTRAN
9 C373475019 Number of Energy Saving Cell Shut Down Carrier Success between LTE
and UTRAN
10 C373475020 Number of Energy Saving Cell Receive Start up Carrier Notify between
LTE and UTRAN
11 C373475021 Number of Energy Saving Cell Start up Carrier Request between LTE and
UTRAN
12 C373475022 Number of Energy Saving Cell Start up Carrier Success between LTE and
UTRAN
13 C373475023 Number of Energy Saving Cell Load satisfy Energy Saving between LTE
and CDMA
9-1
14 C373475024 Number of Energy Saving Cell Shut Down Carrier Request between LTE
and CDMA
15 C373475025 Number of Energy Saving Cell Shut Down Carrier Success between LTE
and CDMA
16 C373475026 Number of Energy Saving Cell Receive Start up Carrier Notify between
LTE and CDMA
17 C373475027 Number of Energy Saving Cell Start up Carrier Request between LTE and
CDMA
18 C373475028 Number of Energy Saving Cell Start up Carrier Success between LTE and
CDMA
19 C373475029 Number of Energy Saving Cell Load satisfy Energy Saving between LTE
and GSM
20 C373475030 Number of Energy Saving Cell Shut Down Carrier Request between LTE
and GSM
21 C373475031 Number of Energy Saving Cell Shut Down Carrier Success between LTE
and GSM
22 C373475032 Number of Energy Saving Cell Receive Start up Carrier Notify between
LTE and GSM
23 C373475033 Number of Energy Saving Cell Start up Carrier Request between LTE and
GSM
24 C373475034 Number of Energy Saving Cell Start up Carrier Success between LTE and
GSM
26 C373475036 Number of Basic Coverage Cell Start up Carrier Request intra RAT
33 C373475043 Number of Cell Receive Erab Resource lack Notify to start up channel
9-2
Short Name
-
Counter Description
This counter counts the number of times that intra-system energy-saving cell load meets
the energy-saving condition.
Triggering Point
When energy-saving cell load meets the energy-saving condition, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.2 C373475012
Counter Name
Number of Energy Saving Cell Shut Down Carrier Request intra RAT
Short Name
-
9-3
Counter Description
This counter counts the number of times that the intra-system energy-saving cell starts
carrier shutdown.
Triggering Point
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.3 C373475013
Counter Name
Number of Energy Saving Cell Shut Down Carrier Success intra RAT
Short Name
-
Counter Description
This counter counts the number of times that the intra-system energy-saving cell
successfully shuts down carriers.
Triggering Point
When the energy-saving cell receives a carrier shutdown success response, this counter
is updated.
Refer to .
9-4
Update Description
When the energy-saving cell receives a carrier shutdown success response, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.4 C373475014
Counter Name
Number of Energy Saving Cell Receive Start up Carrier Notify intra RAT
Short Name
-
Counter Description
This counter counts the number of times that the intra-system energy-saving cell receives
a carrier startup notification from a basic coverage cell.
Triggering Point
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
9-5
Unit
times
9.3.5 C373475015
Counter Name
Number of Energy Saving Cell Start up Carrier Request intra RAT
Short Name
-
Counter Description
This counter counts the number of times that the intra-system energy-saving cell sends a
carrier startup request.
Triggering Point
When the energy-saving cell sends a carrier startup request, this counter is updated.
Refer to .
Update Description
When the energy-saving cell sends a carrier startup request, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.6 C373475016
Counter Name
Number of Energy Saving Cell Start up Carrier Success intra RAT
Short Name
-
9-6
Counter Description
This counter counts the number of times that the intra-system energy-saving cell
successfully starts up carriers.
Triggering Point
When the energy-saving cell receives a carrier startup success response, this counter is
updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup success response, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.7 C373475017
Counter Name
Number of Energy Saving Cell Load satisfy Energy Saving between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that inter-system (LTE and UTRAN)
energy-saving cell load meets the energy-saving condition.
Triggering Point
When energy-saving cell load meets the energy-saving condition, this counter is updated.
Refer to .
9-7
Update Description
When energy-saving cell load meets the energy-saving condition, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.8 C373475018
Counter Name
Number of Energy Saving Cell Shut Down Carrier Request between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and UTRAN)
energy-saving cell starts carrier shutdown.
Triggering Point
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
9-8
Unit
times
9.3.9 C373475019
Counter Name
Number of Energy Saving Cell Shut Down Carrier Success between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and UTRAN)
energy-saving cell successfully shuts down carriers.
Triggering Point
When the energy-saving cell receives a carrier shutdown success response, this counter
is updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier shutdown success response, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.10 C373475020
Counter Name
Number of Energy Saving Cell Receive Start up Carrier Notify between LTE and UTRAN
9-9
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and UTRAN)
energy-saving cell receives a carrier startup notification from a basic coverage cell.
Triggering Point
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.11 C373475021
Counter Name
Number of Energy Saving Cell Start up Carrier Request between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and UTRAN)
energy-saving cell sends a carrier startup request.
Triggering Point
When the energy-saving cell sends a carrier startup request, this counter is updated.
9-10
Refer to .
Update Description
When the energy-saving cell sends a carrier startup request, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.12 C373475022
Counter Name
Number of Energy Saving Cell Start up Carrier Success between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and UTRAN)
energy-saving cell successfully starts up carriers.
Triggering Point
When the energy-saving cell receives a carrier startup success response, this counter is
updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup success response, this counter is
incremented by one.
Counter Type
Accumulated value
9-11
Sampling Period
Event triggered
Unit
times
9.3.13 C373475023
Counter Name
Number of Energy Saving Cell Load satisfy Energy Saving between LTE and CDMA
Short Name
-
Counter Description
This counter counts the number of times that inter-system (LTE and CDMA) energy-saving
cell load meets the energy-saving condition.
Triggering Point
When energy-saving cell load meets the energy-saving condition, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.14 C373475024
Counter Name
Number of Energy Saving Cell Shut Down Carrier Request between LTE and CDMA
9-12
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and CDMA)
energy-saving cell starts carrier shutdown.
Triggering Point
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.15 C373475025
Counter Name
Number of Energy Saving Cell Shut Down Carrier Success between LTE and CDMA
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and CDMA)
energy-saving cell successfully shuts down carriers.
Triggering Point
When the energy-saving cell receives a carrier shutdown success response, this counter
is updated.
9-13
Refer to .
Update Description
When the energy-saving cell receives a carrier shutdown success response, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.16 C373475026
Counter Name
Number of Energy Saving Cell Receive Start up Carrier Notify between LTE and CDMA
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and CDMA)
energy-saving cell receives a carrier startup notification from a basic coverage cell.
Triggering Point
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is incremented by one.
Counter Type
Accumulated value
9-14
Sampling Period
Event triggered
Unit
times
9.3.17 C373475027
Counter Name
Number of Energy Saving Cell Start up Carrier Request between LTE and CDMA
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and CDMA)
energy-saving cell sends a carrier startup request.
Triggering Point
When the energy-saving cell sends a carrier startup request, this counter is updated.
Refer to .
Update Description
When the energy-saving cell sends a carrier startup request, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.18 C373475028
Counter Name
Number of Energy Saving Cell Start up Carrier Success between LTE and CDMA
9-15
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and CDMA)
energy-saving cell successfully starts up carriers.
Triggering Point
When the energy-saving cell receives a carrier startup success response, this counter is
updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup success response, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.19 C373475029
Counter Name
Number of Energy Saving Cell Load satisfy Energy Saving between LTE and GSM
Short Name
-
Counter Description
This counter counts the number of times that inter-system (LTE and GSM) energy-saving
cell load meets the energy-saving condition.
Triggering Point
When energy-saving cell load meets the energy-saving condition, this counter is updated.
9-16
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.20 C373475030
Counter Name
Number of Energy Saving Cell Shut Down Carrier Request between LTE and GSM
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and GSM)
energy-saving cell starts carrier shutdown.
Triggering Point
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is updated.
Refer to .
Update Description
When energy-saving cell load meets the energy-saving condition, and the cell requests
carrier shutdown, this counter is incremented by one.
Counter Type
Accumulated value
9-17
Sampling Period
Event triggered
Unit
times
9.3.21 C373475031
Counter Name
Number of Energy Saving Cell Shut Down Carrier Success between LTE and GSM
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and GSM)
energy-saving cell successfully shuts down carriers.
Triggering Point
When the energy-saving cell receives a carrier shutdown success response, this counter
is updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier shutdown success response, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9-18
9.3.22 C373475032
Counter Name
Number of Energy Saving Cell Receive Start up Carrier Notify between LTE and GSM
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and GSM)
energy-saving cell receives a carrier startup notification from a basic coverage cell.
Triggering Point
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is updated.
Refer to .
Update Description
When the energy-saving cell receives a carrier startup request from a compensation cell,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.23 C373475033
Counter Name
Number of Energy Saving Cell Start up Carrier Request between LTE and GSM
Short Name
-
9-19
Counter Description
This counter counts the number of times that the inter-system (LTE and GSM)
energy-saving cell sends a carrier startup request.
Triggering Point
When the energy-saving cell sends a carrier startup request, this counter is updated.
Refer to .
Update Description
When the energy-saving cell sends a carrier startup request, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.24 C373475034
Counter Name
Number of Energy Saving Cell Start up Carrier Success between LTE and GSM
Short Name
-
Counter Description
This counter counts the number of times that the inter-system (LTE and GSM)
energy-saving cell successfully starts up carriers.
Triggering Point
When the energy-saving cell receives a carrier startup success response, this counter is
updated.
Refer to .
9-20
Update Description
When the energy-saving cell receives a carrier startup success response, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.25 C373475035
Counter Name
Number of Basic Coverage Cell Provide Compensation intra RAT
Short Name
-
Counter Description
This counter counts the number of times that the intra-system basic coverage cell provides
compensation.
Triggering Point
When the basic coverage cell, after receiving an X2 update message indicating that an
energy-saving cell is shut down, provides compensation, this counter is updated.
Refer to .
Update Description
When the basic coverage cell, after receiving an X2 update message indicating that an
energy-saving cell is shut down, provides compensation, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
9-21
Unit
times
9.3.26 C373475036
Counter Name
Number of Basic Coverage Cell Start up Carrier Request intra RAT
Short Name
-
Counter Description
This counter counts the number of times that the intra-system basic coverage cell sends
a carrier startup request to an energy-saving cell.
Triggering Point
When the basic coverage cell sends a carrier startup request to an energy-saving cell, this
counter is updated.
Refer to .
Update Description
When the basic coverage cell sends a carrier startup request to an energy-saving cell, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.27 C373475037
Counter Name
Number of Basic Cell Start up Carrier Success intra RAT
9-22
Short Name
-
Counter Description
This counter counts the number of times that the intra-system basic coverage cell starts
up carriers.
Triggering Point
When the basic coverage cell receives an X2 update message indicating that an
energy-saving cell has successfully started up carriers, this counter is updated.
Refer to .
Update Description
When the basic coverage cell receives an X2 update message indicating that an
energy-saving cell has successfully started up carriers, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.28 C373475038
Counter Name
Number of Cell Shut Down Channel Request
Short Name
-
Counter Description
This counter counts the number of times that the cell sends a channel shutdown request.
Triggering Point
When the channel shutdown condition is met and the cell sends a channel shutdown
request, this counter is updated.
9-23
Refer to .
Update Description
When the channel shutdown condition is met and the cell sends a channel shutdown
request, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.29 C373475039
Counter Name
Number of Cell Shut Down Channel Success
Short Name
-
Counter Description
This counter counts the number of times that the cell successfully shuts down channels.
Triggering Point
When a response indicating successful channel shutdown is received, this counter is
updated.
Refer to .
Update Description
When a response indicating successful channel shutdown is received, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
9-24
Unit
times
9.3.30 C373475040
Counter Name
Number of Cell Start up Channel Request
Short Name
-
Counter Description
This counter counts the number of times that the cell sends a channel startup request.
Triggering Point
When the cell sends a channel startup request, this counter is updated.
Refer to .
Update Description
When the cell sends a channel startup request, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.31 C373475041
Counter Name
Number of Cell Start up Channel Success
Short Name
-
9-25
Counter Description
This counter counts the number of times that the cell successfully starts up channels.
Triggering Point
When a response indicating successful channel startup is received, this counter is updated.
Refer to .
Update Description
When a response indicating successful channel startup is received, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.32 C373475042
Counter Name
Number of Cell Receive antenna fault Notify to start up channel
Short Name
-
Counter Description
This counter counts the number of times that the cell sends a channel startup request due
to antenna faults.
Triggering Point
When the cell receives a message indicating antenna faults and sends a channel startup
request, this counter is updated.
Refer to .
9-26
Update Description
When the cell receives a message indicating antenna faults and sends a channel startup
request, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
9.3.33 C373475043
Counter Name
Number of Cell Receive Erab Resource lack Notify to start up channel
Short Name
-
Counter Description
This counter counts the number of times that the cell sends a channel startup request due
to insufficient service resources.
Triggering Point
When the cell receives a message indicating insufficient service resources and sends a
channel startup request, this counter is updated.
Refer to .
Update Description
When the cell receives a message indicating insufficient service resources and sends a
channel startup request, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
9-27
Unit
times
9-28
1 C373475054 Number of Cell Load Satisfy Qoffset Parameter Optimization intra RAT
3 C373475056 Number of Resume Timer Timeout to Resume Qoffset Parameter intra RAT
10 C373475063 Number of Cell Load Satisfy Ofn Parameter Optimization between LTE and
UTRAN
11 C373475064 Number of Active Resume Ofn Parameter between LTE and UTRAN
12 C373475065 Number of Resume Timer Timeout to Resume Ofn Parameter between LTE
and UTRAN
10-1
24 C373723036 Number of Serve Cell Receive Resume TLB Parameter Request from
Neighbor Cell
Short Name
-
Counter Description
This counter counts the number of times that Qoffset optimization is started for intra-system
cells in a statistical period.
Triggering Point
When cell load meets the condition and Qoffset optimization is started, this counter is
updated.
10-2
Refer to .
Update Description
When cell load meets the condition and Qoffset optimization is started, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.2 C373475055
Counter Name
Number of Active Resume Qoffset Parameter intra RAT
Short Name
-
Counter Description
This counter counts the number of times that Qoffset is recovered for intra-system cells in
a statistical period.
Triggering Point
When cell load meets the Qoffset recovery condition, this counter is updated.
Refer to .
Update Description
When cell load meets the Qoffset recovery condition, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
10-3
Unit
times
10.3.3 C373475056
Counter Name
Number of Resume Timer Timeout to Resume Qoffset Parameter intra RAT
Short Name
-
Counter Description
This counter counts the number of times that Qoffset is recovered due to timer expiry for
intra-system cells in a statistical period.
Triggering Point
When the Qoffset optimization timer expires, this counter is updated.
Refer to .
Update Description
When the Qoffset optimization timer expires, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.4 C373475057
Counter Name
Number of Cell Load Satisfy ThreshXHigh Optimization intra RAT
Short Name
-
10-4
Counter Description
This counter counts the number of times that ThreshXHigh optimization is started for
intra-system cells in a statistical period.
Triggering Point
When cell load meets the condition and ThreshXHigh optimization is started, this counter
is updated.
Refer to .
Update Description
When cell load meets the condition and ThreshXHigh optimization is started, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.5 C373475058
Counter Name
Number of Active Resume ThreshXHigh Parameter intra RAT
Short Name
-
Counter Description
This counter counts the number of times that ThreshXHigh is recovered for intra-system
cells in a statistical period.
Triggering Point
When cell load meets the ThreshXHigh recovery condition, this counter is updated.
Refer to .
10-5
Update Description
When cell load meets the ThreshXHigh recovery condition, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.6 C373475059
Counter Name
Number of Resume Timer Timeout to Resume ThreshXHigh Parameter intra RAT
Short Name
-
Counter Description
This counter counts the number of times that ThreshXHigh is recovered due to timer expiry
for intra-system cells in a statistical period.
Triggering Point
When the ThreshXHigh optimization timer expires, this counter is updated.
Refer to .
Update Description
When the ThreshXHigh optimization timer expires, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
10-6
Unit
times
10.3.7 C373475060
Counter Name
Number of Cell Load Satisfy ThreshXLow Optimization intra RAT
Short Name
-
Counter Description
This counter counts the number of times that ThreshXLow optimization is started for
intra-system cells in a statistical period.
Triggering Point
When cell load meets the condition and ThreshXLow optimization is started, this counter
is updated.
Refer to .
Update Description
When cell load meets the condition and ThreshXLow optimization is started, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.8 C373475061
Counter Name
Number of Active Resume ThreshXLow Parameter intra RAT
10-7
Short Name
-
Counter Description
This counter counts the number of times that ThreshXLow is recovered for intra-system
cells in a statistical period.
Triggering Point
When cell load meets the ThreshXLow recovery condition, this counter is updated.
Refer to .
Update Description
When cell load meets the ThreshXLow recovery condition, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.9 C373475062
Counter Name
Number of Resume Timer Timeout to Resume ThreshXLow Parameter intra RAT
Short Name
-
Counter Description
This counter counts the number of times that ThreshXLow is recovered due to timer expiry
for intra-system cells in a statistical period.
Triggering Point
When the ThreshXLow optimization timer expires, this counter is updated.
Refer to .
10-8
Update Description
When the ThreshXLow optimization timer expires, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.10 C373475063
Counter Name
Number of Cell Load Satisfy Ofn Parameter Optimization between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that Ofn optimization is started for inter-system
cells (LTE and UTRAN) in a statistical period.
Triggering Point
When cell load meets the condition and Ofn optimization is started, this counter is updated.
Refer to .
Update Description
When cell load meets the condition and Ofn optimization is started, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
10-9
Unit
times
10.3.11 C373475064
Counter Name
Number of Active Resume Ofn Parameter between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that Ofn is recovered for inter-system cells (LTE
and UTRAN) in a statistical period.
Triggering Point
When cell load meets the Ofn recovery condition, this counter is updated.
Refer to .
Update Description
When cell load meets the Ofn recovery condition, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.12 C373475065
Counter Name
Number of Resume Timer Timeout to Resume Ofn Parameter between LTE and UTRAN
Short Name
-
10-10
Counter Description
This counter counts the number of times that Ofn is recovered due to timer expiry for
inter-system cells (LTE and UTRAN) in a statistical period.
Triggering Point
When the Ofn optimization timer expires, this counter is updated.
Refer to .
Update Description
When the Ofn optimization timer expires, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.13 C373475066
Counter Name
Number of Cell Load Satisfy ThreshXHigh Parameter Optimization between LTE and
UTRAN
Short Name
-
Counter Description
This counter counts the number of times that ThreshXHigh optimization is started for
inter-system cells (LTE and UTRAN) in a statistical period.
Triggering Point
When cell load meets the condition and ThreshXHigh optimization is started, this counter
is updated.
Refer to .
10-11
Update Description
When cell load meets the condition and ThreshXHigh optimization is started, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.14 C373475067
Counter Name
Number of Active Resume ThreshXHigh Parameter between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that ThreshXHigh is recovered for inter-system
cells (LTE and UTRAN) in a statistical period.
Triggering Point
When cell load meets the ThreshXHigh recovery condition, this counter is updated.
Refer to .
Update Description
When cell load meets the ThreshXHigh recovery condition, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
10-12
Unit
times
10.3.15 C373475068
Counter Name
Number of Resume Timer Timeout to Resume ThreshXHigh Parameter between LTE and
UTRAN
Short Name
-
Counter Description
This counter counts the number of times that ThreshXHigh is recovered due to timer expiry
for inter-system cells (LTE and UTRAN) in a statistical period.
Triggering Point
When the ThreshXHigh optimization timer expires, this counter is updated.
Refer to .
Update Description
When the ThreshXHigh optimization timer expires, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.16 C373475069
Counter Name
Number of Cell Load Satisfy ThreshXLow Parameter Optimization between LTE and
UTRAN
10-13
Short Name
-
Counter Description
This counter counts the number of times that ThreshXLow optimization is started for
inter-system cells (LTE and UTRAN) in a statistical period.
Triggering Point
When cell load meets the condition and ThreshXLow optimization is started, this counter
is updated.
Refer to .
Update Description
When cell load meets the condition and ThreshXLow optimization is started, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.17 C373475070
Counter Name
Number of Active Resume ThreshXLow Parameter between LTE and UTRAN
Short Name
-
Counter Description
This counter counts the number of times that ThreshXLow is recovered for inter-system
cells (LTE and UTRAN) in a statistical period.
Triggering Point
When cell load meets the ThreshXLow recovery condition, this counter is updated.
10-14
Refer to .
Update Description
When cell load meets the ThreshXLow recovery condition, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.18 C373475071
Counter Name
Number of Resume Timer Timeout to Resume ThreshXLow Parameter between LTE and
UTRAN
Short Name
-
Counter Description
This counter counts the number of times that ThreshXLow is recovered due to timer expiry
for inter-system cells (LTE and UTRAN) in a statistical period.
Triggering Point
When the ThreshXLow optimization timer expires, this counter is updated.
Refer to .
Update Description
When the ThreshXLow optimization timer expires, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
10-15
Unit
times
10.3.19 C373723031
Counter Name
Number of Cell Load Satisfy TLB Optimization
Short Name
-
Counter Description
The counter is used to count the number of the load of server cell and neighor cell fulfill
the condition of TLB parameter optimization.
Triggering Point
When the serve cell load satisfy TLB optimization.
Refer to .
Update Description
The counter is incremented by 1 when the serve cell load satisfy TLB optimization.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.20 C373723032
Counter Name
Number of Serve Cell Initiate TLB Parameter Negotiation
Short Name
-
10-16
Counter Description
when the load of server cell and neighor cell fulfill the condition of TLB parameter
optimization The counter is used to count the number of the server cell send the
negotiation request of parameter modification.
Triggering Point
When the serve cell initiate TLB parameter negotiation.
Refer to .
Update Description
The counter is incremented by 1 when the serve cell initiate TLB parameter negotiation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.21 C373723033
Counter Name
Number of Serve Cell TLB Parameter Negotiation Success
Short Name
-
Counter Description
The counter is used to count the number of the server cell receive the success negotiation
response of parameter modification.
Triggering Point
When the serve cell receive TLB parameter negotiation success.
Refer to .
10-17
Update Description
The counter is incremented by 1 when the serve cell receive TLB parameter negotiation
success.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.22 C373723034
Counter Name
Number of Serve Cell Active Resume TLB Parameter
Short Name
-
Counter Description
The counter is used to count the number of the load of server cell and neighor cell fulfill
the condition of TLB parameter resuming.
Triggering Point
When the serve cell active resume TLB parameter .
Refer to .
Update Description
The counter is incremented by 1 when the serve cell active resume TLB parameter .
Counter Type
Accumulated value
Sampling Period
Event triggered
10-18
Unit
times
10.3.23 C373723035
Counter Name
Number of Serve Cell Resume TLB Parameter due to Timeout
Short Name
-
Counter Description
This counter counts the number of requests from neighbor cells to recover TLB parameters.
Triggering Point
When the serving cell starts TLB parameter recovery, this counter is updated.
Refer to .
Update Description
When the serving cell starts TLB parameter recovery, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10.3.24 C373723036
Counter Name
Number of Serve Cell Receive Resume TLB Parameter Request from Neighbor Cell
Short Name
-
10-19
Counter Description
This counter counts the number of times that TLB parameters are recovered due to timer
expiry.
Triggering Point
When the TLB parameter recovery timer of the serving cell expires, this counter is updated.
Refer to .
Update Description
When the TLB parameter recovery timer of the serving cell expires, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
10-20
5 C373475096 Number of Cell not Satisfy Performance Fault after Recover Operation
11-1
Short Name
-
Counter Description
This counter counts the number of times that a cell is detected as an interference fault cell.
Triggering Point
When a cell is detected as an interference fault cell, this counter is updated.
Refer to .
Update Description
When a cell is detected as an interference fault cell, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.2 C373475091
Counter Name
Number of Interference Fault Cell Recovery
Short Name
-
Counter Description
This counter counts the number of times that an interference fault cell recovers.
11-2
Triggering Point
When an interference fault cell recovers, this counter is updated.
Refer to .
Update Description
When an interference fault cell recovers, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.3 C373475094
Counter Name
Number of Detected as Performance Fault Cell
Short Name
-
Counter Description
This counter counts the number of times that a cell is detected a performance downgrading
cell.
Triggering Point
When a cell is detected as a performance downgrading cell, this counter is updated.
Refer to .
Update Description
When a cell is detected as a performance downgrading cell, this counter is incremented
by one.
Counter Type
Accumulated value
11-3
Sampling Period
Event triggered
Unit
times
11.3.4 C373475095
Counter Name
Number of Performance Fault Cell Initiate Recover Operation
Short Name
-
Counter Description
This counter counts the number of times that a performance downgrading cell tries
recovery.
Triggering Point
When a performance downgrading cell tries recovery, this counter is updated.
Refer to .
Update Description
When a performance downgrading cell tries recovery, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.5 C373475096
Counter Name
Number of Cell not Satisfy Performance Fault after Recover Operation
11-4
Short Name
-
Counter Description
This counter counts the number of times that a performance downgrading cell successfully
recovers.
Triggering Point
When a performance downgrading cell successfully recovers, this counter is updated.
Refer to .
Update Description
When a performance downgrading cell successfully recovers, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.6 C373475097
Counter Name
Number of Performance Fault Cell Initiate Compensate Operation
Short Name
-
Counter Description
This counter counts the number of times that a performance downgrading cell initiates
compensation operation.
Triggering Point
When a performance downgrading cell initiates compensation operation, this counter is
updated.
11-5
Refer to .
Update Description
When a performance downgrading cell initiates compensation operation, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.7 C373475098
Counter Name
Number of Receive OMC Fallback Notify After Recover Operation
Short Name
-
Counter Description
This counter counts the number of times that a performance downgrading cell, after
initiating compensation, performs recovery operation.
Triggering Point
When a cell that initiates manually triggered compensation performs recovery operation,
this counter is updated.
Refer to .
Update Description
When a cell that initiates manually triggered compensation performs recovery operation,
this counter is incremented by one.
Counter Type
Accumulated value
11-6
Sampling Period
Event triggered
Unit
times
11.3.8 C373475099
Counter Name
Number of Recovery Timer Timeout to Fallback Recover Operation
Short Name
-
Counter Description
This counter counts the number of times that a performance downgrading cell, after
initiating compensation, performs recovery operation due to timer expiry.
Triggering Point
When a cell, after initiating compensation, performs recovery operation due to timer expiry,
this counter is updated.
Refer to .
Update Description
When a cell, after initiating compensation, performs recovery operation due to timer expiry,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11-7
11.3.9 C373475084
Counter Name
Number of Cell Enters into Sleep State
Short Name
-
Counter Description
The cell is determined to be in sleep state. In this case, the cell exits service state, and
UEs cannot get any service in the cell. If a cell has no alarm except the sleep cell alarm,
it indicates that the cell exits service state. After the sleep cell self-restoration function is
enabled, this counter counts the number of times that a cell enters sleep state through a
periodic check.
Triggering Point
This counter is incremented by one when the periodic check determines that the cell is in
sleep state.
Refer to .
Update Description
This counter is incremented by one when the periodic check determines that the cell is in
sleep state.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.10 C373475085
Counter Name
Number of Sleep Cell Triggers Restoration
Short Name
-
11-8
Counter Description
After a cell enters sleep state, restoration measures applicable to the cell will be taken to
restore the cell to normal. The restoration measures include deleting and establishing cells,
resetting the BBU, and resetting the BPL. This counter counts the number of measures
taken.
Triggering Point
This counter is incremented by one when it is determined that the cell is in sleep state and
restoration measures are taken.
Refer to .
Update Description
This counter is incremented by one when it is determined that the cell is in sleep state and
restoration measures are taken.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.11 C373475086
Counter Name
Number of Sleep Cell Restoration Successfully
Short Name
-
Counter Description
This counter counts the number of times that a cell in sleep state is manually restored after
restoration measures are taken.
Triggering Point
This counter is incremented by one when a cell in sleep state becomes normal after
restoration measures are taken.
Refer to .
11-9
Update Description
This counter is incremented by one when a cell in sleep state becomes normal after
restoration measures are taken.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11.3.12 C373475087
Counter Name
Number of Sleep Cell Enters to Compensation State
Short Name
-
Counter Description
If a cell in sleep state is not restored to be normal through compensation measures, it enters
compensation state. In this case, compensation measures will be taken to solve network
problems caused by the cell's exiting service state through modifying the configurations of
neighbor cells or neighbor NEs. This counter indicates the number of times that the cell
enters compensation state.
Triggering Point
This counter is incremented by one when a cell in sleep state fails to become normal after
restoration measures are taken and enters compensation state.
Refer to .
Update Description
This counter is incremented by one when a cell in sleep state fails to become normal after
restoration measures are taken and enters compensation state.
Counter Type
Accumulated value
11-10
Sampling Period
Event triggered
Unit
times
11.3.13 C373475088
Counter Name
Number of Sleep Cell Manual Restoration after Compensation
Short Name
-
Counter Description
This counter indicates the number of times that a cell in sleep state is manually restored
after compensation measures are taken.
Triggering Point
This counter is incremented by one when a cell in sleep state is manually restored after
compensation measures are taken.
Refer to .
Update Description
This counter is incremented by one when a cell in sleep state is manually restored after
compensation measures are taken.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11-11
11.3.14 C373475089
Counter Name
Number of Sleep Cell Auto Restoration after Compensation Timeout
Short Name
-
Counter Description
This counter indicates the number of times of a cell in sleep state being automatically
restored through compensation measures after the non-manual restoration timer expires.
Triggering Point
This counter is incremented by one when a cell in sleep state is automatically restored
through compensation measures after the non-manual restoration timer expires.
Refer to .
Update Description
After compensation measures are taken for a cell in sleep state, a non-manual restoration
timer is started. This counter is incremented by one when the cell is restored after the
non-manual restoration timer expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
11-12
6 C373404455 Number of Cell Admission Failure due to Not Enough RRC Resource in ENB
7 C373404456 Number of Cell Admission Failure due to Not Enough E-RAB Resource
8 C373404457 Number of Cell Admission Failure due to Not Enough DL PRB Resource
9 C373404458 Number of Cell Admission Failure due to Not Enough UL PRB Resource
10 C373404459 Number of Cell Admission Failure due to Not Enough Transport Resource
11 C373404460 Number of Cell Admission Failure due to Shut Down or Reset Cell
13 C373404462 Number of Cell Admission Failure due to PHY Resource Allocated Failure
16 C373404465 Number of Cell Admission Failure due to Not Enough PRB Resource in Load
Balance inter Manufacturer
12-1
20 C373404469 Number of Cell Admission Failure due to Not Enough CPU Resource
24 C373404473 Number of Cell Admission Failure due to License Prohibit Expanding the QCI
26 C373404475 Number of Cell Admission Failure due to License Restrict the Radio Bearer
Counter Name
Number of Successful Triggered Cell DL Congestion
Short Name
ENB.DLCongeSucc
Counter Description
In the condition of opening "Switch for Congestion Control" ,the eNodeB triggers the DL
congestion control process after detecting cell congestion, then the DL resource admitts
successful, it is added to the counter.
Triggering Point
When the eNodeB occurs DL congestion,and then admit DL resource successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB admitts DL traffic successful after DL
congestion control.
12-2
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.2 C373404451
Counter Name
Number of Triggered Cell DL Congestion Failure
Short Name
ENB.DLCongeFail
Counter Description
In the condition of opening "Switch for Congestion Control" ,the eNodeB triggers the DL
congestion control process after detecting cell congestion, then the DL resource admitts
failed, it is added to the counter.
Triggering Point
When the eNodeB occurs DL congestion,and then admission DL resource failed.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB admitts DL traffic failed after DL
congestion control.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12-3
12.1.3.3 C373404452
Counter Name
Number of Cell DL Load Balance Occurred
Short Name
ENB.DLLoad Balance
Counter Description
In the condition of opening "Load Management Switch of Load Balancing Algorithm",the
eNodeB measures the DL load of the serve cell and the neighbor cell, when the eNodeB
judges the cell needs to trigger DL load banlance process,it is added to the counter.
Triggering Point
When the eNodeB triggers the DL load banlance.
Refer to .
Update Description
The counter is incremented by 1 when the cell triggers DL load banlance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.4 C373404453
Counter Name
Number of Cell DL Load Control Occurred
Short Name
ENB.DlLoad Balance
Counter Description
In the condition of opening "Load Management Switch of Load Control Algorithm",when the
eNodeB judges the cell needs to trigger DL load control process,it is added to the counter.
12-4
Triggering Point
When the eNodeB triggers the DL load control.
Refer to .
Update Description
The counter is incremented by 1 when the cell triggers DL load control.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.5 C373404454
Counter Name
Number of Cell UL Load Control Occurred
Short Name
ENB.UlLoad Balance
Counter Description
In the condition of opening "Load Management Switch of Load Control Algorithm",when the
eNodeB judges the cell needs to trigger UL load control process,it is added to the counter.
Triggering Point
When the eNodeB triggers the UL load control.
Refer to .
Update Description
The counter is incremented by 1 when the cell triggers UL load control.
Counter Type
Accumulated value
12-5
Sampling Period
Event triggered
Unit
times
12.1.3.6 C373404455
Counter Name
Number of Cell Admission Failure due to Not Enough RRC Resource in ENB
Short Name
ENB.AdFail.NotRrcRes
Counter Description
The eNodeB reject the new UE when the current user number is equal to the threshold of
user number in a cell,it is added to the counter.
Triggering Point
When the eNodeB reject the new UE due to not enough RRC resource.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new UE due to not enough
RRC resource.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.7 C373404456
Counter Name
Number of Cell Admission Failure due to Not Enough E-RAB Resource
12-6
Short Name
ENB.AdFail.NotEnbRes
Counter Description
The eNodeB reject the new E-RAB when the current active E-RAB number is equal to the
threshold of active E-RAB number in a cell,it is added to the counter.
Triggering Point
When the eNodeB reject the new E-RAB due to not enough E-RAB resource.
Refer to .
Update Description
The counter is incremented by 1 when the the eNodeB reject the new E-RAB due to not
enough E-RAB resource.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.8 C373404457
Counter Name
Number of Cell Admission Failure due to Not Enough DL PRB Resource
Short Name
ENB.AdFail.NotDlPrbRes
Counter Description
The eNodeB reject the new E-RAB when the current DL PRB usage is higher than the
threshold,it is added to the counter.
Triggering Point
When the eNodeB reject the new E-RAB due to not enough DL PRB resource.
Refer to .
12-7
Update Description
The counter is incremented by 1 when the eNodeB reject the new E-RAB due to not enough
DL PRB resource.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.9 C373404458
Counter Name
Number of Cell Admission Failure due to Not Enough UL PRB Resource
Short Name
ENB.AdFail.NotUlPrbRes
Counter Description
The eNodeB reject the new E-RAB when the current UL PRB usage is higher than the
threshold,it is added to the counter.
Triggering Point
When the eNodeB reject the new E-RAB due to not enough UL PRB resource.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new E-RAB due to not enough
UL PRB resource.
Counter Type
Accumulated value
Sampling Period
Event triggered
12-8
Unit
times
12.1.3.10 C373404459
Counter Name
Number of Cell Admission Failure due to Not Enough Transport Resource
Short Name
ENB.AdFail.NotTransRes
Counter Description
The eNodeB reject the new E-RAB when the transport resource is not enough,it is added
to the counter.
Triggering Point
When the eNodeB reject the new E-RAB due to not enough transport resource.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new E-RAB due to not enough
transport resource.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.11 C373404460
Counter Name
Number of Cell Admission Failure due to Shut Down or Reset Cell
Short Name
ENB.AdFail.CellBlock
12-9
Counter Description
The eNodeB reject the new UE due to cell block,it is added to the counter.
Triggering Point
When the eNodeB reject the new UE due to cell block.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new UE due to cell block.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.12 C373404461
Counter Name
Number of Cell Admission Failure due to Not Enough DL Power
Short Name
ENB.AdFail.NotEnbDlPower
Counter Description
The eNodeB reject the new E-RAB when the DL power resource is not enough,it is added
to the counter.
Triggering Point
When the eNodeB reject the new E-RAB due to not enough DL power resource.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new E-RAB due to not enough
DL power resource.
12-10
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.13 C373404462
Counter Name
Number of Cell Admission Failure due to PHY Resource Allocated Failure
Short Name
ENB.AdFail.PhyResFail
Counter Description
The eNodeB reject the new UE or new E-RAB when the PHY resource allocated failure,it
is added to the counter.
Triggering Point
When the eNodeB reject the new UE or new E-RAB due to PHY resource allocated failure.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new UE or new E-RAB due
to PHY resource allocated failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12-11
12.1.3.14 C373404463
Counter Name
Number of Cell Admission Failure due to Other Reason
Short Name
ENB.AdFail.OtherReason
Counter Description
The eNodeB reject the new UE or new E-RAB due to other reason,it is added to the counter.
Triggering Point
When the eNodeB reject the new UE or new E-RAB due to other reason.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new UE or new E-RAB due
to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.15 C373404464
Counter Name
Number of Cell Admission Failure due to Probability Refuse
Short Name
ENB.AdFail.ProbRef
Counter Description
The eNodeB reject the new UE when the probability refuse,it is added to the counter.
12-12
Triggering Point
When the eNodeB reject the new UE due to probability refuse.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new UE due to probability
refuse.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.16 C373404465
Counter Name
Number of Cell Admission Failure due to Not Enough PRB Resource in Load Balance inter
Manufacturer
Short Name
ENB.AdFail.NotPrbLb
Counter Description
The eNodeB reject the new E-RAB when the PRB resource in load banlance inter
manufacturer resource is not enough,it is added to the counter.
Triggering Point
When the eNodeB reject the new E-RAB due to not enough PRB resource in load banlance
inter manufacturer resource.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new E-RAB due to not enough
PRB resource in load banlance inter manufacturer resource.
12-13
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.17 C373404466
Counter Name
Number of Successful Triggered Cell UL Congestion
Short Name
ENB.ULCongeSucc
Counter Description
In the condition of opening "Switch for Congestion Control" ,the eNodeB triggers the UL
congestion control process after detecting cell congestion, then the UL resource admitts
successful, it is added to the counter.
Triggering Point
When the eNodeB occurs UL congestion,and then admit UL resource successful.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB admitts UL traffic successful after UL
congestion control.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12-14
12.1.3.18 C373404467
Counter Name
Number of Triggered Cell UL Congestion Failure
Short Name
ENB.ULCongeFail
Counter Description
In the condition of opening "Switch for Congestion Control" ,the eNodeB triggers the UL
congestion control process after detecting cell congestion, then the UL resource admitts
failed, it is added to the counter.
Triggering Point
When the eNodeB occurs UL congestion,and then admission UL resource failed.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB admitts UL traffic failed after UL
congestion control.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.19 C373404468
Counter Name
Number of Cell UL Load Balance Occurred
Short Name
ENB.ULLoad Balance
12-15
Counter Description
In the condition of opening "Load Management Switch of Load Balancing Algorithm",the
eNodeB measures the UL load of the serve cell and the neighbor cell, when the eNodeB
judges the cell needs to trigger UL load banlance process,it is added to the counter.
Triggering Point
When the eNodeB triggers the UL load banlance.
Refer to .
Update Description
The counter is incremented by 1 when the cell triggers UL load banlance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.20 C373404469
Counter Name
Number of Cell Admission Failure due to Not Enough CPU Resource
Short Name
ENB.AdFail.NotCpu
Counter Description
The eNodeB reject the new UE or new E-RAB when the current CPU usage of CC board
is greater than the threshold of CPU usage,it is added to the counter.
Triggering Point
When the eNodeB reject the new UE or new E-RAB due to not enough CPU resource.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB reject the new UE or new E-RAB due
to not enough CPU resource.
12-16
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.21 C373404470
Counter Name
Number of Cell Admission Failure due to PCI Modification
Short Name
ENB.AdFail.PciMod
Counter Description
When a new user fails to be admitted by the eNodeB due to PCI modification, this counter
is updated.
Triggering Point
When admission failure occurs due to PCI modification during an admission procedure,
this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB due to PCI modification, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12-17
12.1.3.22 C373404471
Counter Name
Number of Cell Admission Failure due to Energy Saving
Short Name
ENB.AdFail.EnergySaving
Counter Description
When a new user fails to be admitted by the eNodeB due to energy saving, this counter is
updated.
Triggering Point
When admission failure occurs due to energy saving during an admission procedure, this
counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB due to energy saving, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.23 C373404472
Counter Name
Number of Cell Admission Failure due to Self Healing
Short Name
ENB.AdFail.SelfHealing
12-18
Counter Description
When a new user fails to be admitted by the eNodeB due to self healing, this counter is
updated.
Triggering Point
When admission failure occurs due to self healing during an admission procedure, this
counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB due to self healing, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.24 C373404473
Counter Name
Number of Cell Admission Failure due to License Prohibit Expanding the QCI
Short Name
ENB.AdFail.LicenseProhQci
Counter Description
When a new user fails to be admitted by the eNodeB because expanding QCI is prohibited
by the license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because expanding QCI is
prohibited by the license, this counter is updated.
Refer to .
12-19
Update Description
When a new user fails to be admitted by the eNodeB because expanding QCI is prohibited
by the license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.25 C373404474
Counter Name
Number of Cell Admission Failure due to License Prohibit VoIP
Short Name
ENB.AdFail.LicenseProVoip
Counter Description
When a new user fails to be admitted by the eNodeB because VoIP is prohibited by the
license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because VoIP is prohibited
by the license, this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB because VoIP is prohibited by the
license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
12-20
Unit
times
12.1.3.26 C373404475
Counter Name
Number of Cell Admission Failure due to License Restrict the Radio Bearer
Short Name
ENB.AdFail.LicenseRestrBear
Counter Description
When a new user fails to be admitted by the eNodeB because single-UE service bearer is
prohibited by the license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because single-UE service
bearer is prohibited by the license, this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB because single-UE service bearer is
prohibited by the license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12.1.3.27 C373404480
Counter Name
Number of Cell Admission Failure due to VoIP MOS
Short Name
ENB.AdFail.VoIPMos
12-21
Counter Description
When a new service fails to be established in the cell due to the admission restriction to
the VoIP MOS, this counter is incremented.
Triggering Point
When an admission failure occurs due to the admission restriction to the VoIP MOS during
the eNodeB admission procedure, this counter is updated.
Refer to .
Update Description
When an admission failure occurs due to the admission restriction to the VoIP MOS, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
12-22
Counter Name
Cell Service Time
Short Name
ENB.CellAvailableTime
13-1
Counter Description
When the eNodeB successfully setup a cell, record the start time; When the eNodeB delete
a cell due to some reasons, record the end time.The cell service time is equal to the interval
from the start time to the end time.
Triggering Point
The eNodeB reports the collecting service time of cell at sampling time.
Refer to .
Update Description
The counter is incremented by the cell service time at measurement period.
Counter Type
Current value
Sampling Period
Event triggered
Unit
s
13.1.3.2 C373230701
Counter Name
Cell Unavailable Time due to Cell Block
Short Name
ENB.CellUnavailableTime.CellBlock
Counter Description
When the eNodeB receives the CellBlockCommand from the OMC, record the start time;
When the eNodeB receives the CellUnblockCommand from the OMC, record the end time.
The the cell unavailable time due to cell block time is equal to the interval from the start
time to the end time.
Triggering Point
The eNodeB reports the collecting unavailable time of cell due to cell block at sampling
time.
Refer to .
13-2
Update Description
The counter is incremented by the cell unavailable time due to cell block at per
measurement period.
Counter Type
Current value
Sampling Period
Event triggered
Unit
s
13.1.3.3 C373230702
Counter Name
Cell Unavailable Time due to S1 Link Breakdown
Short Name
ENB.CellUnavailableTime.S1LinkDown
Counter Description
When the eNodeB detects S1 link fault, record the start time; When the eNodeB detects
S1 link normal, record the end time.
The the cell unavailable time due to s1 link fault is equal to the interval from the start time
to the end time.
Triggering Point
The eNodeB reports the collecting unavailable time of cell due to S1 link fault at sampling
time.
Refer to .
Update Description
The counter is incremented by the cell unavailable time due to S1 link fault at per
measurement period.
Counter Type
Current value
13-3
Sampling Period
Event triggered
Unit
s
13.1.3.4 C373230703
Counter Name
Cell Unavailable Time due to BBU Abnormal
Short Name
ENB.CellUnavailableTime.BBUAbnormal
Counter Description
When the eNodeB detects BBU abnormal, record the start time; When the eNodeB detects
BBU normal, record the end time.
The the cell unavailable time due to BBU abnormal is equal to the interval from the start
time to the end time.
Triggering Point
The eNodeB reports the collecting unavailable time of cell due to BBU abnormal at
sampling time.
Refer to .
Update Description
The counter is incremented by the cell unavailable time due to BBU abnormal at per
measurement period.
Counter Type
Current value
Sampling Period
Event triggered
Unit
s
13-4
13.1.3.5 C373230704
Counter Name
Cell Unavailable Time due to RRU Abnormal
Short Name
ENB.CellUnavailableTime.RRUAbnormal
Counter Description
When the eNodeB detects RRU abnormal, record the start time; When the eNodeB detects
RRU normal, record the end time.
The the cell unavailable time due to RRU abnormal is equal to the interval from the start
time to the end time.
Triggering Point
The eNodeB reports the collecting unavailable time of cell due to RRU abnormal at
sampling time.
Refer to .
Update Description
The counter is incremented by the cell unavailable time due to RRU abnormal at per
measurement period.
Counter Type
Current value
Sampling Period
Event triggered
Unit
s
13.1.3.6 C373230705
Counter Name
Cell Unavailable Time due to Cell Config Or Check
Short Name
ENB.CellUnavailableTime.CellConfigOrCheck
13-5
Counter Description
When the eNodeB start to config a cell, record the start time; When the eNodeB
successfully config a cell , record the end time.
The the cell unavailable time due to cell configuration is equal to the interval from the start
time to the end time.
Triggering Point
The eNodeB reports the collecting unavailable time of cell due to cell configuration at
sampling time.
Refer to .
Update Description
The counter is incremented by the cell unavailable time due to cell configuration at per
measurement period.
Counter Type
Current value
Sampling Period
Event triggered
Unit
s
13.1.3.7 C373940410
Counter Name
Sum Cell Service Time of eNB
Short Name
-
Counter Description
This counter counts the sum of in-service duration of all the cells in an eNodeB, and is
used for calculating the eNodeB crash ratio.
Triggering Point
This counter counts the sum of in-service duration of all the cells in an eNodeB.
Refer to .
13-6
Update Description
This counter is updated to the sum of in-service duration of all the cells in an eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
s
13-7
13-8
l Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
14-1
Counter Name
Number of Redirection Requests from LTE to UTRAN(CSFB)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for CSFB
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for CSFB
reason in which the UTRAN redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for CSFB reason in which the UTRAN redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14-2
14.1.3.2 C373576608
Counter Name
Number of Redirection Requests from LTE to UTRAN(Due to A2 event)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for A2 event
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for A2 event in
which the UTRAN redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for A2 event in which the UTRAN redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.1.3.3 C373576609
Counter Name
Number of Redirection Requests from LTE to UTRAN(Due to Shut Down or Reset Cell)
Short Name
-
14-3
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for cell block
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for block cell
reason in which the UTRAN redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for block cell reason in which the UTRAN redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.1.3.4 C373576610
Counter Name
Number of Redirection Requests from LTE to UTRAN(Due to B2 event)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for B2 event
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for B2 event in
which the UTRAN redirection information is included.
14-4
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for B2 event in which the UTRAN redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.1.3.5 C373576611
Counter Name
Number of Redirection Requests from LTE to UTRAN(Due to Energy Saving)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for energy
saving reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for energy
saving in which the UTRAN redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for energy saving in which the UTRAN redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
14-5
Unit
times
14.1.3.6 C373576612
Counter Name
Number of Redirection Requests from LTE to UTRAN(Due to Self Healing)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for self
healing reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for self healing
reason in which the UTRAN redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for self healing reason in which the UTRAN redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.1.3.7 C373576613
Counter Name
Number of Redirection Requests from LTE to UTRAN(S1 Status)
14-6
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to UTRAN for S1 link
disconnection reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for S1 link
disconnection reason in which the UTRAN redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for S1 link disconnection reason in which the UTRAN redirection
information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14-7
l Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
Counter Name
Number of Redirection Requests from LTE to CDMA2000(CSFB)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for
CSFB reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for CSFB
reason in which the CDMA2000 redirection information is included.
14-8
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for CSFB reason in which the CDMA2000 redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.2.3.2 C373576615
Counter Name
Number of Redirection Requests from LTE to CDMA2000(Due to A2 event)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for A2
event reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for A2 event in
which the CDMA2000 redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for A2 event in which the CDMA2000 redirection information is
included.
Counter Type
Accumulated value
14-9
Sampling Period
Event triggered
Unit
times
14.2.3.3 C373576616
Counter Name
Number of Redirection Requests from LTE to CDMA2000(Due to Shut Down or Reset Cell)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for cell
block reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for block cell
reason in which the CDMA2000 redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for block cell reason in which the CDMA2000 redirection information
is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14-10
14.2.3.4 C373576617
Counter Name
Number of Redirection Requests from LTE to CDMA2000(Due to B2 event)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for B2
event reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for B2 event in
which the CDMA2000 redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for B2 event in which the CDMA2000 redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.2.3.5 C373576618
Counter Name
Number of Redirection Requests from LTE to CDMA2000(Due to Energy Saving)
Short Name
-
14-11
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for
energy saving reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for energy
saving in which the CDMA2000 redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for energy saving in which the CDMA2000 redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.2.3.6 C373576619
Counter Name
Number of Redirection Requests from LTE to CDMA2000(Due to Self Healing)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for self
healing reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for self healing
reason in which the CDMA2000 redirection information is included.
14-12
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for self healing reason in which the CDMA2000 redirection information
is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.2.3.7 C373576620
Counter Name
Number of Redirection Requests from LTE to CDMA2000(S1 Status)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to CDMA2000 for S1
link disconnection reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for S1 link
disconnection reason in which the CDMA2000 redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for S1 link disconnection reason in which the CDMA2000 redirection
information is included.
Counter Type
Accumulated value
14-13
Sampling Period
Event triggered
Unit
times
l Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
14-14
Counter Name
Number of Redirection Requests from LTE to GSM(CSFB)
Short Name
-
Counter Description
The counter provides the the number of Redirection requests from LTE to GSM for CSFB
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for CSFB
reason in which the GSM redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for CSFB reason in which the GSM redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.3.3.2 C373576601
Counter Name
Number of Redirection Requests from LTE to GSM(Due to A2 event)
Short Name
-
14-15
Counter Description
The counter provides the number of Redirection requests from LTE to GSM for A2 event
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for A2 event in
which the GSM redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for A2 event in which the GSM redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.3.3.3 C373576602
Counter Name
Number of Redirection Requests from LTE to GSM(Due to Shut Down or Reset Cell)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to GSM for cell block
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for block cell
reason in which the GSM redirection information is included.
14-16
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for block cell reason in which the GSM redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.3.3.4 C373576603
Counter Name
Number of Redirection Requests from LTE to GSM(Due to B2 event)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to GSM for B2 event
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for B2 event in
which the GSM redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for B2 event in which the GSM redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
14-17
Unit
times
14.3.3.5 C373576604
Counter Name
Number of Redirection Requests from LTE to GSM(Due to Energy Saving)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to GSM for saving
energy reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for saving
energy in which the GSM redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for saving energy in which the GSM redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.3.3.6 C373576605
Counter Name
Number of Redirection Requests from LTE to GSM(Due to Self Healing)
Short Name
-
14-18
Counter Description
The counter provides the number of Redirection requests from LTE to GSM for self healing
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for self healing
reason in which the GSM redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for self healing reason in which the GSM redirection information is
included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.3.3.7 C373576606
Counter Name
Number of Redirection Requests from LTE to GSM(S1 Status)
Short Name
-
Counter Description
The counter provides the number of Redirection requests from LTE to GSM for S1 link
disconnection reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for S1 link
disconnection reason in which the GSM redirection information is included.
14-19
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for S1 link disconnection reason in which the GSM redirection
information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
l Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
2 C373576632 Number of Redirection Requests intra RAT(Due to Shut Down or Reset Cell)
14-20
Counter Name
Number of Redirection Requests intra RAT(Due to A2 event)
Short Name
-
Counter Description
The counter provides the number of redirection requests intra RAT for A2 event reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for A2 event in
which the intra RAT redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for A2 event in which the intra RAT redirection information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14-21
14.4.3.2 C373576632
Counter Name
Number of Redirection Requests intra RAT(Due to Shut Down or Reset Cell)
Short Name
-
Counter Description
The counter provides the number of redirection requests intra RAT for shut down or reset
cell reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for shut down
or reset cell reason in which the intra RAT redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for shut down or reset cell reason in which the intra RAT redirection
information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.4.3.3 C373576633
Counter Name
Number of Redirection Requests intra RAT(Due to PCI Modification)
Short Name
-
14-22
Counter Description
The counter provides the number of redirection requests intra RAT for PCI modification
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for PCI
modification reason in which the intra RAT redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for PCI modification reason in which the intra RAT redirection
information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.4.3.4 C373576634
Counter Name
Number of Redirection Requests intra RAT(Due to Energy Saving)
Short Name
-
Counter Description
The counter provides the number of redirection requests intra RAT for energy saving
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for energy
saving reason in which the intra RAT redirection information is included.
14-23
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for energy saving reason in which the intra RAT redirection information
is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.4.3.5 C373576635
Counter Name
Number of Redirection Requests intra RAT(Due to Self Healing)
Short Name
-
Counter Description
The counter provides the number of redirection requests intra RAT for self healing reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for self healing
reason in which the intra RAT redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for self healing reason in which the intra RAT redirection information
is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
14-24
Unit
times
14.4.3.6 C373576636
Counter Name
Number of Redirection Requests intra RAT(Due to inter-Frequence Handover)
Short Name
-
Counter Description
The counter provides the number of redirection requests intra RAT for inter-frequence
handover reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for
inter-frequence handover reason in which the intra RAT redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for inter-frequence handover reason in which the intra RAT redirection
information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14.4.3.7 C373576637
Counter Name
Number of Redirection Requests intra RAT(Due to S1 Status)
14-25
Short Name
-
Counter Description
The counter provides the number of redirection requests intra RAT for S1 link disconnection
reason.
Triggering Point
When the eNodeB sends the RRCConnectionRelease message to the UE for S1 link
disconnection reason in which the intra RAT redirection information is included.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB sends the RRCConnectionRelease
message to the UE for S1 link disconnection reason in which the intra RAT redirection
information is included.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
14-26
15-1
l Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
l Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
l Sampling Point 3: The handover execution process.
l Sampling Point 4: The eNodeB receives the
RRCConnectionReconfigurationComplete messge from UE indicating
handover successfully.
l Sampling Point 5: The eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 6: The eNodeB receives the
RRCConnectionReestablishmentRequest message from UE during
intra-eNB handover.
15-2
15-3
Counter Name
Number of Successful Outgoing intra-eNB intra-freq Handover Preparation
Short Name
HO.IntraEnbIntraFreqOutPrepSucc
Counter Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to UTRAN and
is a blind handover, this counter counts the number of handover requests from EUTRAN
to UTRAN.
Triggering Point
When the source eNodeB sends the MME a HandoverRequired message, this counter is
updated.
Refer to Sampling Point 2.
Update Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to UTRAN
and is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.2 C373250901
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbIntraFreqOutPrepFail.UeReSrcCell
15-4
Counter Description
When the source eNodeB receive a HandoverCommand message from the MME, and this
handover is a blind handover, this counter counts the number of outgoing handovers from
EUTRAN to UTRAN.
Triggering Point
When the source eNodeB receives a HandoverCommand message from the MME, this
counter is updated.
Refer to Sampling Point 6.
Update Description
When the source eNodeB receives a HandoverCommand message from the MME, and
this handover is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.3 C373250902
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.IntraEnbIntraFreqOutPrepFail.DstFail
Counter Description
When the source eNodeB receive a UEContextRelease message from the MME, indicating
the handover is successfully executed, and this handover is a blind handover, this counter
counts the number of outgoing handovers from EUTRAN to UTRAN.
Triggering Point
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, this counter is updated.
Refer to .
15-5
Update Description
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, and this handover is a blind handover,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.4 C373250903
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbIntraFreqOutPrepFail.OtherReason
Counter Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to GSM and
is a blind handover, this counter counts the number of handover requests from EUTRAN
to GSM.
Triggering Point
When the source eNodeB sends the MME a HandoverRequired message, this counter is
updated.
Refer to .
Update Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to GSM and
is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
15-6
Sampling Period
Event triggered
Unit
times
15.1.1.3.5 C373250940
Counter Name
Number of Successful Incoming intra-eNB intra-freq Handover Preparation
Short Name
HO.IntraEnbIntraFreqInPrepSucc
Counter Description
When the source eNodeB receive a HandoverCommand message from the MME, and this
handover is a blind handover, this counter counts the number of outgoing handovers from
EUTRAN to GSM.
Triggering Point
When the source eNodeB receives a HandoverCommand message from the MME, this
counter is updated.
Refer to Sampling Point 4.
Update Description
When the source eNodeB receives a HandoverCommand message from the MME, and
this handover is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.6 C373250941
Counter Name
Number of Incoming intra-eNB intra-freq Handover Preparation Failure due to Resource
Allocation Fail
15-7
Short Name
HO.IntraEnbIntraFreqInPrepFail.ResFail
Counter Description
When the source eNodeB receive a UEContextRelease message from the MME, indicating
the handover is successfully executed, and this handover is a blind handover, this counter
counts the number of outgoing handovers from EUTRAN to GSM.
Triggering Point
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, and this handover is a blind handover,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.7 C373250942
Counter Name
Number of Incoming intra-eNB intra-freq Handover Preparation Failure due to Dest Occur
Reestblishment
Short Name
HO.IntraEnbIntraFreqInPrepFail.DstReest
Counter Description
For an inter-eNodeB S1 handover, when the source eNodeB receives a Handover
Command message (3GPP TS36.413) from the MME, this counter is updated.
For an inter-eNodeB X2 handover, when the source eNodeB receives a Handover Request
Acknowledge message (3GPP TS36.423) from the target eNodeB, this counter is updated.
15-8
Triggering Point
For an inter-eNodeB S1 handover, when the source eNodeB receives a Handover
Command message (3GPP TS36.413) from the MME, this counter is updated.
For an inter-eNodeB X2 handover, when the source eNodeB receives a Handover Request
Acknowledge message (3GPP TS36.423) from the target eNodeB, this counter is updated.
For an intra-eNodeB handover, when the source eNodeB sends the UE an
RRCConnectionReconfiguration message, this counter is updated.
Update Description
For an inter-eNodeB S1 handover, when the source eNodeB receives a Handover
Command message (3GPP TS36.413) from the MME, this counter is updated.
For an inter-eNodeB X2 handover, when the source eNodeB receives a Handover Request
Acknowledge message (3GPP TS36.423) from the target eNodeB, this counter is updated.
For an intra-eNodeB handover, when the source eNodeB sends the UE an
RRCConnectionReconfiguration message, this counter is updated.
When a load-balancing-based inter-standard intra-system handover occurs in the above
cases, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.8 C373250943
Counter Name
Number of Incoming intra-eNB intra-freq Handover Preparation Failure due to Other
Reason
15-9
Short Name
HO.IntraEnbIntraFreqInPrepFail.OtherReason
Counter Description
During a UE handover procedure, when the source cell receives a Handover Preparation
Failures message or the handover timer expires that results in handover failure, this
counter counts the number of times that load-balancing-based outgoing handover
preparation from LTE FDD to LTE TDD or from LTE TDD to LTE FDD fails.
Triggering Point
During a UE handover procedure, when the source cell receives a Handover Preparation
Failures message or the handover timer expires that results in handover failure, this
counter is updated.
Refer to .
Update Description
During a UE handover procedure, when the source cell receives a Handover Preparation
Failures message or the handover timer expires that results in handover failure, and
a load-balancing-based inter-standard intra-system handover occurs, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.9 C373250980
Counter Name
Number of Successful Outgoing intra-eNB intra-freq Handover Execution
Short Name
HO.IntraEnbIntraFreqOutExeSucc
Counter Description
During a UE handover procedure, when the source cell receives a UEContextRelease
message, this counter counts the number of times that load-balancing-based outgoing
15-10
handover preparation from LTE FDD to LTE TDD or from LTE TDD to LTE FDD is
successful.
Triggering Point
During a UE handover procedure, when the source cell receives a UEContextRelease
message, this counter is updated.
Refer to Sampling Point 4.
Update Description
During a UE handover procedure, when the source cell receives a UEContextRelease
message, and a load-balancing-based inter-standard intra-system handover occurs, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.10 C373250981
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbIntraFreqOutExeFail.UeReSrcCell
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is updated.
Refer to .
15-11
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.11 C373250982
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Short Name
HO.IntraEnbIntraFreqOutExeFail.DstReest
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is updated.
Refer to Sampling Point 6.
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is incremented by one.
Counter Type
Accumulated value
15-12
Sampling Period
Event triggered
Unit
times
15.1.1.3.12 C373250983
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbIntraFreqOutExeFail.OtherReason
Counter Description
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is updated when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is updated.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is updated.
This counter calculates intra-system handovers only.
Triggering Point
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is updated when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is updated.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is updated.
This counter calculates intra-system handovers only.
Refer to .
Update Description
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is incremented by one when the eNodeB starts the handover.
15-13
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is incremented by one.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.13 C373250984
Counter Name
Number of Successful Incoming intra-eNB intra-freq Handover Execution
Short Name
HO.IntraEnbIntraFreqInExeSucc
Counter Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, When the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
updated.
If the handover is an X2 handover, when the source eNodeB receives a
HandoverRequestAck message from the target eNodeB , this counter is updated.
If the handover is an S1 handover, when the source eNodeB receives a
HandoverCommand message from the MME, this counter is updated.
This counter calculates intra-system handovers only.
Triggering Point
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
updated.
If the handover is an X2 handover, when the source eNodeB receives a
HandoverRequestAck message from the target eNodeB , this counter is updated.
15-14
Update Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, When the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.14 C373250985
Counter Name
Number of Incoming intra-eNB intra-freq Handover Execution Failure due to RRC
ReconfigComplete Timeout
Short Name
HO.IntraEnbIntraFreqInExeFail.RRCTimeOut
Counter Description
For a blind handover executed by the eNodeB:
15-15
Triggering Point
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is updated.
If the handover is an X2 handover, when the source eNodeB receives a UEContextRelease
message from the target eNodeB , this counter is updated.
If the handover is an S1 handover, when the source eNodeB receives a UEContextRelease
message from the MME, this counter is updated.
This counter calculates intra-system handovers only.
Update Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-16
15.1.1.3.15 C373250986
Counter Name
Number of Incoming intra-eNB intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Short Name
HO.IntraEnbIntraFreqInExeFail.DstReest
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by self
healing, this counter is updated.
Refer to Sampling Point 6.
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by self
healing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.16 C373250987
Counter Name
Number of Incoming intra-eNB intra-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbIntraFreqInExeFail.OtherReason
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
15-17
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by self healing, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by self healing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.17 C373250988
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.IntraEnbIntraFreqOutPrepFail.UserInactive
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by cell
shutdown or cell reset, this counter is updated.
Refer to .
15-18
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by cell
shutdown or cell reset, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.1.3.18 C373250989
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to Waiting
Reconfiguration Complete timeout
Short Name
HO.IntraEnbIntraFreqOutExeFail.RRCTimeout
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by cell shutdown or cell reset, this counter is updated.
Refer to Sampling Point 5.
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by cell shutdown or cell reset, this counter is incremented by one.
Counter Type
Accumulated value
15-19
Sampling Period
Event triggered
Unit
times
l Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
15-20
15-21
15-22
15-23
15.1.2.3.1 C373261200
Counter Name
Number of Successful Outgoing inter-eNB(via X2) intra-freq Handover Preparation
Short Name
HO.InterEnbX2IntraFreqOutPrepSucc
Counter Description
When a new user fails to be admitted by the eNodeB due to PCI modification, this counter
is updated.
Triggering Point
When admission failure occurs due to PCI modification during an admission procedure,
this counter is updated.
Refer to Sampling Point 8.
Update Description
When a new user fails to be admitted by the eNodeB due to PCI modification, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.2 C373261201
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to HO
Request Ack Timeout
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.HOTimeOut
15-24
Counter Description
When a new user fails to be admitted by the eNodeB due to energy saving, this counter is
updated.
Triggering Point
When admission failure occurs due to energy saving during an admission procedure, this
counter is updated.
Refer to Sampling Point 5.
Update Description
When a new user fails to be admitted by the eNodeB due to energy saving, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.3 C373261202
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.DstFail
Counter Description
When a new user fails to be admitted by the eNodeB due to self healing, this counter is
updated.
Triggering Point
When admission failure occurs due to self healing during an admission procedure, this
counter is updated.
15-25
Update Description
When a new user fails to be admitted by the eNodeB due to self healing, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.4 C373261203
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.OtherReason
Counter Description
When a new user fails to be admitted by the eNodeB because expanding QCI is prohibited
by the license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because expanding QCI is
prohibited by the license, this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB because expanding QCI is prohibited
by the license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-26
Unit
times
15.1.2.3.5 C373261204
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.UeReSrcCell
Counter Description
When a new user fails to be admitted by the eNodeB because VoIP is prohibited by the
license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because VoIP is prohibited
by the license, this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB because VoIP is prohibited by the
license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.6 C373261240
Counter Name
Number of Successful Incoming inter-eNB(via X2) intra-freq Handover Preparation
Short Name
HO.InterEnbX2IntraFreqInPrepSucc
15-27
Counter Description
When a new user fails to be admitted by the eNodeB because single-UE service bearer is
prohibited by the license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because single-UE service
bearer is prohibited by the license, this counter is updated.
Refer to Sampling Point 4.
Update Description
When a new user fails to be admitted by the eNodeB because single-UE service bearer is
prohibited by the license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.7 C373261241
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.InterEnbX2IntraFreqInPrepFail.ResAllocFail
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target has no enough resource
then sends the HANDOVER PREPARATION FAILURE message to the source eNodeB
indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover Preparation failure message to the source
eNodeB due to admission failures.
Refer to Sampling Point 7.
15-28
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover Preparation
failure message to the source eNodeB due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.8 C373261242
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Source Cancle HO
Short Name
HO.InterEnbX2IntraFreqInPrepFail.SrcCancleHO
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target receives the HANDOVER
CANCEL message from the source eNodeB indicating handover failure.Each the
HANDOVER CANCEL message is added to the counter.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-29
Unit
times
15.1.2.3.9 C373261243
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2IntraFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target occur other failures then sends
the HANDOVER PREPARATION FAILURE message to the source eNodeB indicating the
handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.10 C373261280
Counter Name
Number of Successful Outgoing inter-eNB(via X2) intra-freq Handover Execution
Short Name
HO.InterEnbX2IntraFreqOutExeSucc
15-30
Counter Description
When eNodeB receives a X2AP message UE CONTEXT RELEASE sent from the target
eNodeB to the source eNodeB, it indicates a successful handover over the X2. Each UE
CONTEXT RELEASE message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the target
eNodeB.
Refer to Sampling Point 16.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.11 C373261281
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2IntraFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to the target eNodeB. Each this RRCConnectionReestablishmentRequest
message received is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
15-31
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.12 C373261282
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbX2IntraFreqOutExeFail.UeRelTimeOut
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the timer of monitoring the message expires.Then the source trigger
UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
15-32
Sampling Period
Event triggered
Unit
times
15.1.2.3.13 C373261283
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2IntraFreqOutExeFail.OtherReason
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.14 C373261284
Counter Name
Number of Successful Incoming inter-eNB(via X2) intra-freq Handover Execution
15-33
Short Name
HO.InterEnbX2IntraFreqInExeSucc
Counter Description
Transmission of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB, indicating a successful IRAT handover. Each UE CONTEXT
RELEASE message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE message to the source
eNodeB
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.15 C373261285
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbX2IntraFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST
ACKNOWLEDGE from target eNB to the source eNodeB,the timer of monitoring
RRCConnectionReconfigurationComplete message expires.The target trigger local
UE entity release.
15-34
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires.
Refer to Sampling Point 10.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfiguration
Complete message expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.16 C373261286
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to Path
Switch Failure
Short Name
HO.InterEnbX2IntraFreqInExeFail.PathFail
Counter Description
After transmission of PATH SWITCH REQUEST message from target eNB to the
MME,the target receives the PATH SWITCH REQUEST FAILURE message from the
MME indicating handover failure.The target trigger UE release. Each the UE CONTEXT
RELEASE message is added to the counter.
Triggering Point
When the target eNodeB receives the PathSwitchRequestFailure message or the timer of
waiting for the PathSwitchACK message expires
Refer to Sampling Point 13, 14.
15-35
Update Description
The counter is incremented by 1 when the target eNodeB receives the
PathSwitchRequestFailure message or the timer of waiting for the PathSwitchACK
message expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.17 C373261287
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2IntraFreqInExeFail.OtherReason
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
target eNB to the source eNodeB,the target occur other failures then trigger UE release
indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-36
Unit
times
15.1.2.3.18 C373261288
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to
Source Cancel HO
Short Name
HO.InterEnbX2IntraFreqInExeFail.OtherReason
Counter Description
After transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB receives
the RRCConnectionReestablishmentRequest message from the UE. The HANDOVER
CANCEL message is sent to by the source eNodeB to the target eNodeB.
Triggering Point
When the target eNodeB receives the Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.19 C373261289
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to User
Inactivity
15-37
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the source eNodeB to the
target eNodeB. Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.20 C373261290
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2IntraFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to
the target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the source eNodeB indicating the handover failures.
15-38
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE during handover preparation.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE during handover
preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.21 C373261291
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2IntraFreqInExeFail.UeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE
from target eNodeB to the source eNodeB,the target receives the
RRCConnectionReestablishmentRequest message from the UE indicating the handover
failure.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE during handover execution
Refer to .
15-39
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE during handover
execution.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.2.3.22 C373261292
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Request
Short Name
HO.InterEnbX2IntraFreqOutPrepReq
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
source eNB to the target eNodeB,it indicates the attempt of an outgoing inter-eNB
handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequest message to the target eNodeB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequest
message to the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-40
Unit
times
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
15-41
15-42
15-43
Counter Name
Number of Successful Outgoing inter-eNB(via S1) intra-freq Handover Preparation
Short Name
HO.InterEnbS1IntraFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the S1 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
15-44
Unit
times
15.1.3.3.2 C373271501
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.HoTimeOut
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
sends the HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.3 C373271502
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.DstFail
15-45
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationFailures message from the MME. It
indicates the handover has failed.Each HandoverPreparationFailures message received
is added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.4 C373271503
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.OtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
15-46
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.5 C373271504
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
15-47
Sampling Period
Event triggered
Unit
times
15.1.3.3.6 C373271540
Counter Name
Number of Successful Incoming inter-eNB(via S1) intra-freq Handover Preparation
Short Name
HO.InterEnbS1IntraFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.7 C373271541
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Resource Allocation Fail
15-48
Short Name
HO.InterEnbS1IntraFreqInPrepFail.ResFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.8 C373271542
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Source Cancel HO
Short Name
HO.InterEnbS1IntraFreqInPrepFail.SrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
15-49
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME before .
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.9 C373271543
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1IntraFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
15-50
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.10 C373271580
Counter Name
Number of Successful Outgoing inter-eNB(via S1) intra-freq Handover Execution
Short Name
HO.InterEnbS1IntraFreqOutExeSucc
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful handover over the S1. Each UE
CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-51
15.1.3.3.11 C373271581
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1IntraFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 15.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.12 C373271582
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbS1IntraFreqOutExeFail.UeRelTimeOut
15-52
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 14.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.13 C373271583
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1IntraFreqOutExeFail.OtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
15-53
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.14 C373271584
Counter Name
Number of Successful Incoming inter-eNB(via S1) intra-freq Handover Execution
Short Name
HO.InterEnbS1IntraFreqInExeSucc
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE COMMAND message to
MME.
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE COMMAND message to MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-54
Unit
times
15.1.3.3.15 C373271585
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbS1IntraFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.16 C373271586
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to
Source Cancel HO
15-55
Short Name
HO.InterEnbS1IntraFreqInExeFail.SrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.17 C373271587
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1IntraFreqInExeFail.OtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
15-56
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.18 C373271588
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNB to the target eNB, the source eNodeB detects the user
inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME. Each
the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
15-57
Sampling Period
Event triggered
Unit
times
15.1.3.3.19 C373271589
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1IntraFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the MME to the
target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-58
15.1.3.3.20 C373271590
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1IntraFreqInExeFail.UeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the RRCConnectionReestablishmentRequest message from the
UE indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.1.3.3.21 C373271591
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Request
Short Name
HO.InterEnbS1IntraFreqOutPrepReq
15-59
Counter Description
Transmission of the S1AP message HANDOVER REQUIRED from the source eNodeB to
the MME, indicating the attempt of an outgoing inter-eNB handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-60
l Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
l Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
l Sampling Point 3: The handover execution process.
l Sampling Point 4: The eNodeB receives the
RRCConnectionReconfigurationComplete messge from UE indicating
handover successfully.
l Sampling Point 5: The eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 6: The eNodeB receives the
RRCConnectionReestablishmentRequest message from UE during
intra-eNB handover.
15-61
15-62
15.2.1.3.1 C373281800
Counter Name
Number of Successful Outgoing intra-eNB inter-freq Handover Preparation
Short Name
HO.IntraEnbInterFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing intra-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.2 C373281801
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbInterFreqOutPrepFail.UeReSrcCell
15-63
Counter Description
The source cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during the preparation of resources in target cell. The source
reports handover preparation failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in source cell
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.3 C373281802
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.IntraEnbInterFreqOutPrepFail.DstFail
Counter Description
Because the target cell in eNB has no enough the resources, the source cell reports
handover preparation failure.
Triggering Point
When the eNodeB occurs handover preparation failures in target cell
Refer to .
15-64
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.4 C373281803
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbInterFreqOutPrepFail.OtherReason
Counter Description
Because the source cell in eNB occurs other failure during handover preparation, it reports
handover preparation failure.
Triggering Point
When the eNodeB occurs handover preparation failures due to other reason in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
due to other reason in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
15-65
Unit
times
15.2.1.3.5 C373281840
Counter Name
Number of Successful Incoming intra-eNB inter-freq Handover Preparation
Short Name
HO.IntraEnbInterFreqInPrepSucc
Counter Description
The targe cell in eNB has an successful preparation of resources indicating a successful
incoming intra-eNB handover.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
UE in target cell
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.6 C373281841
Counter Name
Number of Incoming intra-eNB inter-freq Handover Preparation Failure due to Resource
Allocation Fail
Short Name
HO.IntraEnbInterFreqInPrepFail.ResFail
15-66
Counter Description
The targe cell in eNB has an preparation failures of resources indicating a incoming
intra-eNB handover failure.
Triggering Point
When the eNodeB occurs the admission failures in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the admission failures in target
cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.7 C373281842
Counter Name
Number of Incoming intra-eNB inter-freq Handover Preparation Failure due to Dst occur
Re-establishment
Short Name
HO.IntraEnbInterFreqInPrepFail.DstReest
Counter Description
The targe cell in eNB has received the RRCConnectionReestablishmentRequest message
from the UE during handover preparation indicating a incoming intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell
15-67
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.8 C373281843
Counter Name
Number of Incoming intra-eNB inter-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbInterFreqInPrepFail.OtherReason
Counter Description
The targe cell in eNB occurs other failures during handover preparation indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover preparation failures due to other reason in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
due to other reason in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
15-68
Unit
times
15.2.1.3.9 C373281880
Counter Name
Number of Successful Outgoing intra-eNB inter-freq Handover Execution
Short Name
HO.IntraEnbInterFreqOutExeSucc
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target cell in eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
the UE in target cell
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from the UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.10 C373281881
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbInterFreqOutExeFail.UeReSrcCell
15-69
Counter Description
The source cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution indicating a outgoing intra-eNB
handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.11 C373281882
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Short Name
HO.IntraEnbInterFreqOutExeFail.DstReest
Counter Description
The target cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution, the source report handover failure
indicating a outgoing intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell
Refer to Sampling Point 6.
15-70
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.12 C373281883
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbInterFreqOutExeFail.OtherReason
Counter Description
The source cell in eNB occurs other failures during handover execution indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover execution failures due to other reason in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover execution failures
due to other reason in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-71
15.2.1.3.13 C373281884
Counter Name
Number of Successful Incoming intra-eNB inter-freq Handover Execution
Short Name
HO.IntraEnbInterFreqInExeSucc
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target cell in eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter
in target cell.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
the UE in target cell
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from the UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.14 C373281885
Counter Name
Number of Incoming intra-eNB inter-freq Handover Execution Failure due to RRC Reconfig
Complete Timeout
Short Name
HO.IntraEnbInterFreq.InExeFail.RRCTimeOut
15-72
Counter Description
After successful the preparation of resources in target cell,the timer of monitoring
RRCConnectionReconfigurationComplete message expires during handover
execution.The target trigger UE release.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires in target cell.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.15 C373281886
Counter Name
Number of Incoming intra-eNB inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Short Name
HO.IntraEnbInterFreqInExeFail.DstReest
Counter Description
The target cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution, the target report handover failure
indicating a incoming intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell.
Refer to Sampling Point 6.
15-73
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.16 C373281887
Counter Name
Number of Incoming intra-eNB inter-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbInterFreqInExeFail.OtherReason
Counter Description
The targe cell in eNB occurs other failures during handover execution indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover execution failures due to other reason in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover execution failures
due to other reason in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-74
15.2.1.3.17 C373281888
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.IntraEnbInterFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, the source cell detects the user inactive then trigger UE release.
Triggering Point
The eNodeB detects that the UE's state is "inactive" in source cell during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state is "user inactive" in source cell during
handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.1.3.18 C373281889
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to Waiting
Reconfiguration Complete Timeout
Short Name
HO.IntraEnbInterFreqOutExeFail.RRCTimeOut
15-75
Counter Description
After successful the preparation of resources in target cell during handover execution,the
timer of monitoring RRCConnectionReconfigurationComplete message expires.The target
trigger UE release.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires in target cell.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-76
l Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
l Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
l Sampling Point 5: The source eNodeB occurs timeout for
HandoverRequestAcknowledge message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
15-77
15-78
15-79
Counter Name
Number of Successful Outgoing inter-eNB(via X2) inter-freq Handover Preparation
Short Name
HO.InterEnbX2InterFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the X2 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
15-80
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.2 C373292101
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to HO
Request Ack Timeout
Short Name
HO.InterEnbX2InterFreqOutPrepFail.HOTimeOut
Counter Description
After transmission of the HandoverRequst message from the source eNodeB to the
target eNodeB, the timer of monitoring the HandoverRequestAck message expires. Then
the source sends the HandoverCancel message to the target eNodeB. It indicates the
handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverRequestAck message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverRequestAck message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-81
15.2.2.3.3 C373292102
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbX2InterFreqOutPrepFail.DstFail
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the target
eNodeB, the source receives the HandoverPreparationFailure message from the target
eNodeB. It indicates the handover has failed.Each HandoverPreparationFailure message
received is added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
target eNodeB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.4 C373292103
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2InterFreqOutPrepFail.OtherReason
15-82
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the
target eNodeB, the source occurs other failures. Then the source send HandoverCancel
message to the target eNodeB. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.5 C373292104
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2InterFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the target
eNodeB, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
15-83
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.6 C373292140
Counter Name
Number of Successful Incoming inter-eNB(via X2) inter-freq Handover Preparation
Short Name
HO.InterEnbX2InterFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB,the target sends the HANDOVER REQUEST ACKNOWLEDGE message to the
source eNodeB indicating the successful preparation of resources.Each HANDOVER
REQUEST ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the source eNodeB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-84
Unit
times
15.2.2.3.7 C373292141
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.InterEnbX2InterFreqInPrepFail.ResFail
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target has no enough resource
then sends the HANDOVER PREPARATION FAILURE message to the source eNodeB
indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover Preparation failure message to the source
eNodeB due to admission failures.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover Preparation
failure message to the source eNodeB due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.8 C373292142
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Source Cancel HO
15-85
Short Name
HO.InterEnbX2InterFreqInPrepFail.SrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target receives the HANDOVER
CANCEL message from the source eNodeB indicating handover failure.Each the
HANDOVER CANCEL message is added to the counter.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.9 C373292143
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2InterFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target occur other failures then sends
the HANDOVER PREPARATION FAILURE message to the source eNodeB indicating the
handover failures.
15-86
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.10 C373292180
Counter Name
Number of Successful Outgoing inter-eNB(via X2) inter-freq Handover Execution
Short Name
HO.InterEnbX2InterFreqOutExeSucc
Counter Description
When eNodeB receives a X2AP message UE CONTEXT RELEASE sent from the target
eNodeB to the source eNodeB, it indicates a successful handover over the X2. Each UE
CONTEXT RELEASE message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the target
eNodeB.
Refer to Sampling Point 16.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the target eNodeB.
Counter Type
Accumulated value
15-87
Sampling Period
Event triggered
Unit
times
15.2.2.3.11 C373292181
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2InterFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to the target eNodeB. Each this RRCConnectionReestablishmentRequest
message received is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 20.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-88
15.2.2.3.12 C373292182
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbX2InterFreqOutExeFail.UeRelTimeOut
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the timer of monitoring the message expires.Then the source trigger
UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 17.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.13 C373292183
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2InterFreqOutExeFail.OtherReason
15-89
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.14 C373292184
Counter Name
Number of Successful Incoming inter-eNB(via X2) inter-freq Handover Execution
Short Name
HO.InterEnbX2InterFreqInExeSucc
Counter Description
Transmission of a X2AP message UE CONTEXT RELEASE sent from target eNodeB
to the source eNodeB, indicating a successful IRAT handover. Each UE CONTEXT
RELEASE message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE message to the source
eNodeB
15-90
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.15 C373292185
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to RRC
Reconfig Timeout
Short Name
HO.InterEnbX2InterFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST
ACKNOWLEDGE from target eNB to the source eNodeB,the timer of monitoring
RRCConnectionReconfigurationComplete message expires.The target trigger local
UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete expires
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfiguration Complete message expires.
Counter Type
Accumulated value
15-91
Sampling Period
Event triggered
Unit
times
15.2.2.3.16 C373292186
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to Path
Switch Failure
Short Name
HO.InterEnbX2InterFreqInExeFail.PathFail
Counter Description
After transmission of PATH SWITCH REQUEST message from target eNB to the
MME,the target receives the PATH SWITCH REQUEST FAILURE message from the
MME indicating handover failure.The target trigger UE release. Each the UE CONTEXT
RELEASE message is added to the counter.
Triggering Point
When the target eNodeB receives the PathSwitchRequestFailure message or the timer of
waiting for the PathSwitchACK message expires
Refer to Sampling Point 13, 14.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
PathSwitchRequestFailure message or the timer of waiting for the PathSwitchACK
message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-92
15.2.2.3.17 C373292187
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2InterFreqInExeFail.OtherReason
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
target eNB to the source eNodeB,the target occur other failures then trigger UE release
indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.18 C373292188
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to
Source Cancel HO
Short Name
HO.InterEnbX2InterFreqInExeFail.SrcCancelHO
15-93
Counter Description
After transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB receives
the RRCConnectionReestablishmentRequest message from the UE. The HANDOVER
CANCEL message is sent to by the source eNodeB to the target eNodeB.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.19 C373292189
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbX2InterFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the source eNodeB to the
target eNodeB. Each the condition is added to the counter.
Triggering Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB during handover
preparation
15-94
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.2.3.20 C373292190
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2InterFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to
the target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the source eNodeB indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
15-95
Sampling Period
Event triggered
Unit
times
15.2.2.3.21 C373292191
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2InterFreqInExeFail.UeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST
ACKNOWLEDGE from target eNB to the source eNodeB,the target receives the
RRCConnectionReestablishmentRequest message from the UE indicating the handover
failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-96
15.2.2.3.22 C373292192
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Request
Short Name
HO.InterEnbX2InterFreqOutPrepReq
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
source eNB to the target eNodeB,it indicates the attempt of an outgoing inter-eNB
handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequest message to the target eNodeB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequest
message to the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-97
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
15-98
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
l Sampling Point 10: The target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE.
l Sampling Point 11: The target eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
l Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
l Sampling Point 14: The source eNodeB occurs timeout for
UEContextReleaseCommand message.
15-99
15-100
15.2.3.3.1 C373302400
Counter Name
Number of Successful Outgoing inter-eNB(via S1) inter-freq Handover Preparation
Short Name
HO.InterEnbS1InterFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the S1 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-101
15.2.3.3.2 C373302401
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.InterEnbS1InterFreqOutPrepFail.HOTimeOut
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
sends the HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.3 C373302402
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbS1InterFreqOutPrepFail.DstFail
15-102
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.4 C373302403
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1InterFreqOutPrepFail.OtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
15-103
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.5 C373302404
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1InterFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
15-104
Sampling Period
Event triggered
Unit
times
15.2.3.3.6 C373302440
Counter Name
Number of Successful Incoming inter-eNB(via S1) inter-freq Handover Preparation
Short Name
HO.InterEnbS1InterFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.7 C373302441
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Resource Allocation Fail
15-105
Short Name
HO.InterEnbS1InterFreqInPrepFail.ResFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.8 C373302442
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Source Cancel HO
Short Name
HO.InterEnbS1InterFreqInPrepFail.SrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
15-106
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.9 C373302443
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1InterFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
15-107
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.10 C373302480
Counter Name
Number of Successful Outgoing inter-eNB(via S1) inter-freq Handover Execution
Short Name
HO.InterEnbS1InterFreqOutExeSucc
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful handover over the S1. Each UE
CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-108
15.2.3.3.11 C373302481
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1InterFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 15.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.12 C373302482
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbS1InterFreqOutExeFail.UeRelTimeOut
15-109
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 14.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.13 C373302483
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1InterFreqOutExeFail.OtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
15-110
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.14 C373302484
Counter Name
Number of Successful Incoming inter-eNB(via S1) inter-freq Handover Execution
Short Name
HO.InterEnbS1InterFreqInExeSucc
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE COMMAND message to
MME.
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE COMMAND message to MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-111
Unit
times
15.2.3.3.15 C373302485
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbS1InterFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.16 C373302486
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to
Source Cancel HO
15-112
Short Name
HO.InterEnbS1InterFreqInExeFail.SrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.17 C373302487
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1InterFreqInExeFail.OtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
15-113
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.18 C373302488
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbS1InterFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
15-114
Sampling Period
Event triggered
Unit
times
15.2.3.3.19 C373302489
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1InterFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the MME to the
target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-115
15.2.3.3.20 C373302490
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1InterFreqInExeFail.UeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the RRCConnectionReestablishmentRequest message from the
UE indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.2.3.3.21 C373302491
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Request
Short Name
HO.InterEnbS1InterFreqOutPrepReq
15-116
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,it indicates the attempt of an outgoing inter-eNB handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-117
15-118
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
15-119
15-120
15-121
15.3.1.3.1 C373312700
Counter Name
Number of Successful Incoming inter-RAT(UTRAN->LTE) Handover Preparation
Short Name
HO.IartInPrepareSucc.UTRAN2LTE
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.2 C373312701
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.IartInPrepareFail.UTRAN2LTEResAllocFail
15-122
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB sends the HandoverFailure message to the MME due to
admission failures.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverFailure
message to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.3 C373312702
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure due to
Source Cancel HO
Short Name
HO.IartInPrepareFail.UTRAN2LTESrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
15-123
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.4 C373312703
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartInPrepareFail.UTRAN2LTEOtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason.
Counter Type
Accumulated value
15-124
Sampling Period
Event triggered
Unit
times
15.3.1.3.5 C373312704
Counter Name
Number of Successful Incoming inter-RAT(UTRAN->LTE) Handover Execution
Short Name
HO.IartInExecutSucc.UTRAN2LTE
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE COMMAND message from
UE
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE COMMAND message from UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.6 C373312705
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
15-125
Short Name
HO.IartInExecutFail.UTRAN2LTECompleteTimeout
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.7 C373312706
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Execution Failure due to Source
Cancel HO
Short Name
HO.IartInExecutFail.UTRAN2LTESrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
15-126
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.8 C373312707
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Execution Failure due to Other
Cause
Short Name
HO.IartInExecutFail.UTRAN2LTEOtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
15-127
Sampling Period
Event triggered
Unit
times
15.3.1.3.9 C373312708
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) Handover Preparation
Short Name
HO.IartOutPrepareSucc.LTE2UTRAN
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the eNodeB to the UTRAN,it indicates the successful preparation of
an outgoing inter-eNB handover. Each RRCConnectionReconfiguration message
transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.10 C373312709
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to HO
Command Timeout
15-128
Short Name
HO.IartOutPrepareFail.LTE2UTRANHoTimeOut
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
send HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.11 C373312710
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to Dst
Preparation Failure
Short Name
HO.IartOutPrepareFail.LTE2UTRANDstPreFail
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationfailure message from the MME. It
indicates the handover has failed.Each HandoverPreparationfailure message received is
added to the counter.
15-129
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.12 C373312711
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartOutPrepareFail.LTE2UTRANOtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
15-130
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.13 C373312712
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) Handover Execution
Short Name
HO.IartOutExecutSucc.LTE2UTRAN
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->UTRAN).
Each UE CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-131
15.3.1.3.14 C373312713
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN)Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IartOutExecutFail.LTE2UTRANUeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.15 C373312714
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.IartOutExecutFail.LTE2UTRANUeRelTimeOut
15-132
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 14.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.16 C373312715
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Execution Failure due to Other
Cause
Short Name
HO.IartOutExecutFail.LTE2UTRANOtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
15-133
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.17 C373312716
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to User
Inactivity
Short Name
-
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
15-134
Sampling Period
Event triggered
Unit
times
15.3.1.3.18 C373312730
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Attemps
Short Name
-
Counter Description
Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the
UE indicating the attempt of an outgoing handover from EUTRAN to UTRAN. Each
MobilityFromEUTRACommand message or HandoverFromEUTRAPreparationRequest
message transmitted is added to the counter.
Triggering Point
When the eNodeB receives the HandoverRequest message from the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the target eNodeB receives the HandoverRequest
message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.19 C373312731
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure
15-135
Short Name
-
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target sends the HANDOVER FAILURE
message to the MME indicating the handover failures.Each HANDOVER FAILURE
message is added to the counter.
Triggering Point
When the target eNodeB sends the Handoverfailure message to the MME or timer's
timeout.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the Handoverfailure
message to the MME or timer's timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.20 C373312732
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Attemps
Short Name
-
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, it request the preparation of resources at the target. Each HandoverRequired
message is added to the counter.
15-136
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.1.3.21 C373312733
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure
Short Name
-
Counter Description
1 After transmission of the HandoverRequired message from the source eNodeB to the
MME, the eNodeB receives the HandoverPreparationfailure message from the MME. Each
HandoverPreparationfailure message is added to the counter.
2 After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring HandoverCommand message expires indicating handover
failure.
etc..
Triggering Point
When the source eNodeB receives the HandoverPreparationfailure message from the
MME or timer's timeout.
Refer to .
15-137
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverPreparationfailure message form the MME or timer's timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-138
15-139
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
15-140
15-141
Counter Name
Number of Successful Incoming inter-RAT(CDMA->LTE) Handover Preparation
15-142
Short Name
HO.IartInPrepareSucc.CDMA2LTE
Counter Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to GSM and
is a blind handover, this counter counts the number of handover requests from EUTRAN
to GSM.
Triggering Point
When the source eNodeB sends the MME a HandoverRequired message, this counter is
updated.
Refer to Sampling Point 4.
Update Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to GSM and
is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.2 C373323001
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.IartInPrepareFail.CDMA2LTEResAllocFail
Counter Description
When the source eNodeB receive a HandoverCommand message from the MME, and this
handover is a blind handover, this counter counts the number of outgoing handovers from
EUTRAN to GSM.
15-143
Triggering Point
When the source eNodeB receives a HandoverCommand message from the MME, this
counter is updated.
Refer to Sampling Point 6.
Update Description
When the source eNodeB receives a HandoverCommand message from the MME, and
this handover is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.3 C373323002
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Preparation Failure due to Source
Cancel HO
Short Name
HO.IartInPrepareFail.CDMA2LTESrcCancelHO
Counter Description
When the source eNodeB receive a UEContextRelease message from the MME, indicating
the handover is successfully executed, and this handover is a blind handover, this counter
counts the number of outgoing handovers from EUTRAN to GSM.
Triggering Point
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, and this handover is a blind handover,
this counter is incremented by one.
15-144
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.4 C373323003
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartInPrepareFail.CDMA2LTEOtherReason
Counter Description
For an inter-eNodeB S1 handover, when the source eNodeB receives a Handover
Command message (3GPP TS36.413) from the MME, this counter is updated.
For an inter-eNodeB X2 handover, when the source eNodeB receives a Handover Request
Acknowledge message (3GPP TS36.423) from the target eNodeB, this counter is updated.
For an intra-eNodeB handover, when the source eNodeB sends the UE an
RRCConnectionReconfiguration message, this counter is updated.
This counter counts the number of times that load-balancing-based outgoing handover
preparation from LTE FDD to LTE TDD or from LTE TDD to LTE FDD is successful in the
above cases.
Triggering Point
For an inter-eNodeB S1 handover, when the source eNodeB receives a Handover
Command message (3GPP TS36.413) from the MME, this counter is updated.
For an inter-eNodeB X2 handover, when the source eNodeB receives a Handover Request
Acknowledge message (3GPP TS36.423) from the target eNodeB, this counter is updated.
For an intra-eNodeB handover, when the source eNodeB sends the UE an
RRCConnectionReconfiguration message, this counter is updated.
Refer to .
Update Description
For an inter-eNodeB S1 handover, when the source eNodeB receives a Handover
Command message (3GPP TS36.413) from the MME, this counter is updated.
15-145
For an inter-eNodeB X2 handover, when the source eNodeB receives a Handover Request
Acknowledge message (3GPP TS36.423) from the target eNodeB, this counter is updated.
For an intra-eNodeB handover, when the source eNodeB sends the UE an
RRCConnectionReconfiguration message, this counter is updated.
When a load-balancing-based inter-standard intra-system handover occurs in the above
cases, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.5 C373323004
Counter Name
Number of Successful Incoming inter-RAT(CDMA->LTE) Handover Execution
Short Name
HO.IartInExecutSucc.CDMA2LTE
Counter Description
During a UE handover procedure, when the source cell receives a Handover Preparation
Failures message or the handover timer expires that results in handover failure, this
counter counts the number of times that load-balancing-based outgoing handover
preparation from LTE FDD to LTE TDD or from LTE TDD to LTE FDD fails.
Triggering Point
During a UE handover procedure, when the source cell receives a Handover Preparation
Failures message or the handover timer expires that results in handover failure, this
counter is updated.
Refer to Sampling Point 12.
Update Description
During a UE handover procedure, when the source cell receives a Handover Preparation
Failures message or the handover timer expires that results in handover failure, and
a load-balancing-based inter-standard intra-system handover occurs, this counter is
incremented by one.
15-146
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.6 C373323005
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.IartInExecutFail.CDMA2LTECompleteTimeout
Counter Description
During a UE handover procedure, when the source cell receives a UEContextRelease
message, this counter counts the number of times that load-balancing-based outgoing
handover preparation from LTE FDD to LTE TDD or from LTE TDD to LTE FDD is
successful.
Triggering Point
During a UE handover procedure, when the source cell receives a UEContextRelease
message, this counter is updated.
Refer to Sampling Point 11.
Update Description
During a UE handover procedure, when the source cell receives a UEContextRelease
message, and a load-balancing-based inter-standard intra-system handover occurs, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-147
Unit
times
15.3.2.3.7 C373323006
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Execution Failure due to Source
Cancel HO
Short Name
HO.IartInExecutFail.CDMA2LTESrcCancelHO
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.8 C373323007
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Execution Failure due to Other
Cause
15-148
Short Name
HO.IartInExecutFail.CDMA2LTEOtherReason
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.9 C373323008
Counter Name
Number of Successful Outgoing inter-RAT(LTE->CDMA) Handover Preparation
Short Name
HO.IartOutPrepareSucc.CDMA2LTE
Counter Description
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is updated when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is updated.
15-149
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is updated.
This counter calculates intra-system handovers only.
Triggering Point
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is updated when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is updated.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is updated.
This counter calculates intra-system handovers only.
Update Description
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is incremented by one when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is incremented by one.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.10 C373323009
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to HO
Command Timeout
15-150
Short Name
HO.IartOutPrepareFail.LTE2CDMAHoTimeOut
Counter Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, When the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
updated.
If the handover is an X2 handover, when the source eNodeB receives a
HandoverRequestAck message from the target eNodeB , this counter is updated.
Triggering Point
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
updated.
Update Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, When the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
incremented by one.
If the handover is an X2 handover, when the source eNodeB receives a
HandoverRequestAck message from the target eNodeB , this counter is incremented
by one.
15-151
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.11 C373323010
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to Dst
Preparation Failure
Short Name
HO.IartOutPrepareFail.LTE2CDMADstPreFail
Counter Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is updated.
If the handover is an X2 handover, when the source eNodeB receives a UEContextRelease
message from the target eNodeB , this counter is updated.
If the handover is an S1 handover, when the source eNodeB receives a UEContextRelease
message from the MME, this counter is updated.
Triggering Point
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is updated.
15-152
Update Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is
incremented by one.
If the handover is an X2 handover, when the source eNodeB receives a UEContextRelease
message from the target eNodeB , this counter is incremented by one.
If the handover is an S1 handover, when the source eNodeB receives a UEContextRelease
message from the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.12 C373323011
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartOutPrepareFail.LTE2CDMAOtherReason
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by self
healing, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by self
healing, this counter is incremented by one.
15-153
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.13 C373323012
Counter Name
Number of Successful Outgoing inter-RAT(LTE->CDMA) Handover Execution
Short Name
HO.IartOutExecutSucc.LTE2CDMA
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by self healing, this counter is updated.
Refer to Sampling Point 13.
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by self healing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-154
15.3.2.3.14 C373323013
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA)Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IartOutExecutFail.LTE2CDMAUeReSrcCell
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by cell
shutdown or cell reset, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by cell
shutdown or cell reset, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.15 C373323014
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.IartOutExecutFail.LTE2CDMAUeRelTimeOut
15-155
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by cell shutdown or cell reset, this counter is updated.
Refer to Sampling Point 14.
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by cell shutdown or cell reset, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.16 C373323015
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Execution Failure due to Other
Cause
Short Name
HO.IartOutExecutFail.LTE2CDMAOtherReason
Counter Description
When a new user fails to be admitted by the eNodeB due to PCI modification, this counter
is updated.
Triggering Point
When admission failure occurs due to PCI modification during an admission procedure,
this counter is updated.
Refer to .
15-156
Update Description
When a new user fails to be admitted by the eNodeB due to PCI modification, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.2.3.17 C373323016
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to User
Inactivity
Short Name
-
Counter Description
When a new user fails to be admitted by the eNodeB due to energy saving, this counter is
updated.
Triggering Point
When admission failure occurs due to energy saving during an admission procedure, this
counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB due to energy saving, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-157
Unit
times
15-158
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
15-159
15-160
15.3.3.3.1 C373333300
Counter Name
Number of Successful Incoming inter-RAT(GSM->LTE) Handover Preparation
15-161
Short Name
HO.IartInPrepareSucc.GSM2LTE
Counter Description
When a new user fails to be admitted by the eNodeB due to self healing, this counter is
updated.
Triggering Point
When admission failure occurs due to self healing during an admission procedure, this
counter is updated.
Refer to Sampling Point 4.
Update Description
When a new user fails to be admitted by the eNodeB due to self healing, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.2 C373333301
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.IartInPrepareFail.GSM2LTEResAllocFail
Counter Description
When a new user fails to be admitted by the eNodeB because expanding QCI is prohibited
by the license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because expanding QCI is
prohibited by the license, this counter is updated.
15-162
Update Description
When a new user fails to be admitted by the eNodeB because expanding QCI is prohibited
by the license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.3 C373333302
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Preparation Failure due to Source
Cancel HO
Short Name
HO.IartInPrepareFail.GSM2LTESrcCancelHO
Counter Description
When a new user fails to be admitted by the eNodeB because VoIP is prohibited by the
license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because VoIP is prohibited
by the license, this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB because VoIP is prohibited by the
license, this counter is incremented by one.
Counter Type
Accumulated value
15-163
Sampling Period
Event triggered
Unit
times
15.3.3.3.4 C373333303
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartInPrepareFail.GSM2LTEOtherReason
Counter Description
When a new user fails to be admitted by the eNodeB because single-UE service bearer is
prohibited by the license, this counter is updated.
Triggering Point
When admission failure occurs during an admission procedure because single-UE service
bearer is prohibited by the license, this counter is updated.
Refer to .
Update Description
When a new user fails to be admitted by the eNodeB because single-UE service bearer is
prohibited by the license, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.5 C373333304
Counter Name
Number of Successful Incoming inter-RAT(GSM>LTE) Handover Execution
15-164
Short Name
HO.IartInExecutSucc.GSM2LTE
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE COMMAND to MME.
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE COMMAND to MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.6 C373333305
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.IartInExecutFail.GSM2LTECompleteTimeout
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
15-165
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.7 C373333306
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Execution Failure due to Path
Source Cancel HO
Short Name
HO.IartInExecutFail.GSM2LTESrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME
15-166
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.8 C373333307
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Execution Failure due to Other
Cause
Short Name
HO.IartInExecutFail.GSM2LTEOtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-167
15.3.3.3.9 C373333308
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GSM) Handover Preparation
Short Name
HO.IartOutPrepareSucc.LTE2GSM
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the eNodeB to the GSM,it indicates the successful preparation of
an outgoing inter-eNB handover. Each RRCConnectionReconfiguration message
transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.10 C373333309
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.IartOutPrepareFail.LTE2GSMHoTimeOut
15-168
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
send HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.11 C373333310
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to
Destination Preparation Failure
Short Name
HO.IartOutPrepareFail.LTE2GSMDstPreFail
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationfailure message from the MME. It
indicates the handover has failed.Each HandoverPreparationfailure message received is
added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
15-169
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.12 C373333311
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartOutPrepareFail.LTE2GSMOtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-170
Unit
times
15.3.3.3.13 C373333312
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GSM) Handover Execution
Short Name
HO.IartOutExecutSucc.LTE2GSM
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->UTRAN).
Each UE CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.14 C373333313
Counter Name
Number of Outgoing inter-RAT(LTE->GSM)Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IartOutExecutFail.LTE2GSMUeReSrcCell
15-171
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.15 C373333314
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Execution Failure due to UE Context
Release Timeout
Short Name
HO.IartOutExecutFail.LTE2GSMUeRelTimeOut
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 14.
15-172
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.16 C373333315
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Execution Failure due to Other
Cause
Short Name
HO.IartOutExecutFail.LTE2GSMOtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-173
Unit
times
15.3.3.3.17 C373333316
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to User
Inactivity
Short Name
-
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.18 C373333330
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Attemps
15-174
Short Name
-
Counter Description
Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the
UE indicating the attempt of an outgoing handover from EUTRAN to UTRAN. Each
MobilityFromEUTRACommand message or HandoverFromEUTRAPreparationRequest
message transmitted is added to the counter.
Triggering Point
When the target eNodeB receives the HandoverRequest message from the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the target eNodeB receives the HandoverRequest
message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.19 C373333331
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure
Short Name
-
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target sends the HANDOVER FAILURE
message to the MME indicating the handover failures.Each HANDOVER FAILURE
message is added to the counter.
15-175
Triggering Point
When the target eNodeB sends the Handoverfailure message to the MME or timer's
timeout.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the Handoverfailure
message to the MME or timer's timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.3.3.3.20 C373333332
Counter Name
Number of Incoming inter-RAT(GSM->LTE) Handover Preparation Attemps
Short Name
-
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, it request the preparation of resources at the target. Each HandoverRequired
message is added to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME.
Counter Type
Accumulated value
15-176
Sampling Period
Event triggered
Unit
times
15.3.3.3.21 C373333333
Counter Name
Number of Incoming inter-RAT(GSM->LTE) Handover Preparation Failure
Short Name
-
Counter Description
1 After transmission of the HandoverRequired message from the source eNodeB to the
MME, the eNodeB receives the HandoverPreparationfailure message from the MME. Each
HandoverPreparationfailure message is added to the counter.
2 After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring HandoverCommand message expires indicating handover
failure.
etc..
Triggering Point
When the source eNodeB receives the HandoverPreparationfailure message from the
MME or timer's timeout.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverPreparationfailure message form the MME or timer's timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-177
15-178
15-179
61 C373733300 UL Unbalance Degree before HO between Serving Cell and Neighbor Cell
62 C373733301 DL Unbalance Degree before HO between Serving Cell and Neighbor Cell
15-180
Counter Name
Number of Successful Outgoing inter-Cell intra-freq Handover Preparation based Covering
Short Name
HO.IntraFreqOutPrepSucc.Covering
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing inter-eNB handover.
If the handover cause is coverage and the handover type is intra-freq, each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source cell handover preparation completes. The
sampling point changes with the handover type. For details, refer
to the descriptions of Sampling Point of intra-eNB handover, X2
interface handover, and S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover preparation completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.2 C373485101
Counter Name
Number of Outgoing inter-Cell intra-freq Handover Preparation Failure based Covering
15-181
Short Name
HO.IntraFreqOutPrepFail.Covering
Counter Description
Receipt of the HANDOVER PREPARATION FAILURE message by The eNodeB or timeout
etc. it indicates the handover preparation failure. If the handover cause is coverage and
the handover type is intra-freq, the failure is added to the counter.
Triggering Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNB handover, X2 interface handover, and
S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover preparation fails.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.3 C373485102
Counter Name
Number of Successful Outgoing inter-Cell intra-freq Handover Execution based Covering
Short Name
HO.IntraFreqOutExecuSucc.Covering
Counter Description
When eNodeB receives the UE CONTEXT RELEASE message sent from the target cell
to the source cell or the UE CONTEXT RELEASE COMMAND sent from the MME to the
15-182
source eNodeB, it indicates a successful handover.If the handover cause is coverage and
the handover type is intra-freq, the message is added to the counter.
Triggering Point
When the source cell handover completes. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNB handover, X2 interface handover, and
S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.4 C373485103
Counter Name
Number of Outgoing inter-Cell intra-freq Handover Execution Failure based Covering
Short Name
HO.IntraFreqOutExecuFail.Covering
Counter Description
Not receipt of the RRCConnectionReestablishmentComplete message by The eNodeB or
timeout etc. it indicates the handover execution failure. If the handover cause is coverage
and the handover type is intra-freq, the failure is added to the counter.
Triggering Point
When the source cell handover fails. The sampling point changes
with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
15-183
interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution fails.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.5 C373485104
Counter Name
Number of Successful Outgoing inter-Cell inter-freq Handover Preparation based Covering
Short Name
HO.InterFreqOutPrepSucc.Covering
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing inter-eNB handover.
If the handover cause is coverage and the handover type is inter-freq, each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source cell handover preparation completes. The
sampling point changes with the handover type. For details, refer
Update Description
The counter is incremented by 1 when the source cell handover preparation completes.
15-184
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.6 C373485105
Counter Name
Number of Outgoing inter-Cell inter-freq Handover Preparation Failure based Covering
Short Name
HO.InterFreqOutPrepFail.Covering
Counter Description
Receipt of the HANDOVER PREPARATION FAILURE message by the eNodeB or timeout
etc. it indicates the handover preparation failure. If the handover cause is coverage and
the handover type is inter-freq, the failure is added to the counter.
Triggering Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions
Update Description
The counter is incremented by 1 when the source cell handover preparation fails.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-185
Unit
times
15.4.3.7 C373485106
Counter Name
Number of Successful Outgoing inter-Cell inter-freq Handover Execution based Covering
Short Name
HO.InterFreqOutExecuSucc.Covering
Counter Description
When eNodeB receives the UE CONTEXT RELEASE message sent from the target cell
to the source cell or the UE CONTEXT RELEASE COMMAND sent from the MME to the
source eNodeB, it indicates a successful handover based on the coverage.If the handover
cause is coverage and the handover type is inter-freq, the message is added to the counter.
Triggering Point
When the source cell handover completes. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNB handover, X2 interface handover, and
S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-186
15.4.3.8 C373485107
Counter Name
Number of Outgoing inter-Cell inter-freq Handover Execution Failure based Covering
Short Name
HO.InterFreqOutExecuFail.Covering
Counter Description
Not receipt of the RRCConnectionReestablishmentComplete message by the eNodeB or
timeout etc. it indicates the handover execution failure. If the handover cause is coverage
and the handover type is inter-freq, the failure is added to the counter.
Triggering Point
When the source cell handover fails. The sampling point changes
with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution fails
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.9 C373485108
Counter Name
Number of Successful Outgoing inter-Cell inter-freq Handover Preparation based on Load
Balance
15-187
Short Name
HO.InterFreqOutPrepSucc.Load Balance
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing inter-eNB handover.
If the handover cause is LoadBalance and the handover type is inter-freq, each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source cell handover preparation completes. The
sampling point changes with the handover type. For details, refer
to the descriptions of Sampling Point of intra-eNB handover, X2
interface handover, and S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover preparation completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.10 C373485109
Counter Name
Number of Outgoing inter-Cell inter-freq Handover Preparation Failure based on Load
Balance
Short Name
HO.InterFreqOutPrepFail.Load Balance
15-188
Counter Description
Receipt of the HANDOVER PREPARATION FAILURE message by the eNodeB or timeout
etc. it indicates the handover preparation failure. If the handover cause is LoadBalance
and the handover type is inter-freq, the failure is added to the counter.
Triggering Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNB handover, X2 interface handover, and
S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover preparation fails.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.11 C373485110
Counter Name
Number of Successful Outgoing inter-Cell inter-freq Handover Execution based on Load
Balance
Short Name
HO.InterFreqOutExecuSucc.Load Balance
Counter Description
When eNodeB receives the UE CONTEXT RELEASE message sent from the target cell
to the source cell or the UE CONTEXT RELEASE COMMAND sent from the MME to the
source eNodeB, it indicates a successful handover.If the handover cause is LoadBalance
and the handover type is inter-freq, the message is added to the counter.
15-189
Triggering Point
When the source cell handover completes. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNB handover, X2 interface handover, and
S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.12 C373485111
Counter Name
Number of Outgoing inter-Cell inter-freq Handover Execution Failure based on Load
Balance
Short Name
HO.InterFreqOutExecuFail.Load Balance
Counter Description
Not receipt of the RRCConnectionReestablishmentComplete message by the eNodeB
or timeout etc. it indicates the handover execution failure. If the handover cause is
LoadBalance and the handover type is inter-freq, the failure is added to the counter.
Triggering Point
When the source cell handover fails. The sampling point changes
with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
15-190
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution fails.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.13 C373485112
Counter Name
Number of Outgoing X2 Handover Preparation Attemps based on Load Balance
Short Name
-
Counter Description
The counter provides the numberof attempted outgoing handovers preparation for
loadbalance via X2 interface.
Triggering Point
When the source eNodeB sends the HandoverRequest message to the target eNodeB
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequest
message to the target eNodeB and the handover cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-191
Unit
times
15.4.3.14 C373485113
Counter Name
Number of Successful Outgoing X2 Handover Preparation based on Load Balance
Short Name
-
Counter Description
The counter provides the number of successful outgoing handovers preparation for
loadbalance via X2 interface.
Triggering Point
When the source eNodeB receives the HandoverRequestAcknowledge message from the
target eNodeB
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverRequestAcknowledge message from the target eNodeB and the handover
cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.15 C373485114
Counter Name
Number of Outgoing X2 Handover Preparation Failure based on Load Balance
15-192
Short Name
-
Counter Description
The counter provides the number of outgoing handovers preparation failures for
loadbalance via X2 interface.
Triggering Point
When the source eNodeB receives the HandoverPreparationfailure message from the
target eNodeB,the timer waitting for the HandoverPreparationfailure message expires or
other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverPreparationfailure message from the target eNodeB,the timer waitting for the
HandoverPreparationfailure message expires or other reason and the handover cause
is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.16 C373485115
Counter Name
Number of Successful Outgoing X2 Handover based on Load Balance
Short Name
-
Counter Description
The counter provides the number of successful outgoing handovers execution for
loadbalance via X2 interface.
15-193
Triggering Point
When the source eNodeB receives the UEContextRelease message from the target
eNodeB
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the UEContextRelease
message from the target eNodeB and the handover cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.17 C373485116
Counter Name
Number of Outgoing X2 Handover Execution Failure based on Load Balance
Short Name
-
Counter Description
The counter provides the number of outgoing handovers execution failures for loadbalance
via X2 interface.
Triggering Point
When the eNodeB's timer waitting for the UEContextRelease message expires or the
eNodeB receives the RRCConnectionReestablishment message after sending the
RRCConnectionReconfiguration message
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB's timer waitting
for the UEContextRelease message expires or the eNodeB receives
15-194
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.18 C373485117
Counter Name
Number of Outgoing X2 Handover Cancels based on Load Balance
Short Name
-
Counter Description
The counter provides the number of outgoing handover cancel for loadbalance via X2
interface.
Triggering Point
When the source eNodeB sends the HandoverCancel message to the target eNodeB
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverCancel
message to the target eNodeB and the handover cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-195
15.4.3.19 C373485118
Counter Name
Number of Incoming X2 Handover Preparation Attemps based on Load Balance
Short Name
-
Counter Description
The counter provides the number of attempted incoming handovers preparation for
loadbalance via X2 interface.
Triggering Point
When the target eNodeB receives the HandoverRequest message from the source
eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the HandoverRequest
message from the source eNodeB and the handover cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.20 C373485119
Counter Name
Number of Successful Incoming X2 Handover Preparation based on Load Balance
Short Name
-
15-196
Counter Description
The counter provides the number of successful incoming handovers preparation for
loadbalance via X2 interface.
Triggering Point
When the target eNodeB sends the HandoverRequestAcknowledge message to the
source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the
HandoverRequestAcknowledge message to the source eNodeB and the handover cause
is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.21 C373485120
Counter Name
Number of Incoming X2 Handover Preparation Failure based on Load Balance
Short Name
-
Counter Description
The counter provides the number of incoming handovers preparation failures for
loadbalance via X2 interface.
Triggering Point
When the target eNodeB sends the HandoverPreprationFailure message to the source
eNodeB.
Refer to .
15-197
Update Description
The counter is incremented by 1 when the target eNodeB sends the
HandoverPreprationFailure message to the source eNodeB and the handover cause
is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.22 C373485121
Counter Name
Number of Successful Incoming X2 Handover based on Load Balance
Short Name
-
Counter Description
The counter provides the number of successful incoming handovers execution for
loadbalance via X2 interface.
Triggering Point
When the target eNodeB sends the UEContextRelease message to the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the UEContextRelease
message to the source eNodeB and the handover cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-198
Unit
times
15.4.3.23 C373485122
Counter Name
Number of Incoming X2 Handover Cancels based on Load Balance
Short Name
-
Counter Description
The counter provides the number of incoming handover cancel for loadbalance via X2
interface.
Triggering Point
When the target eNodeB receives the HandoverCancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the HandoverCancel
message from the source eNodeB and the handover cause is LoadBalance.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.24 C373485123
Counter Name
Number of Successful Outgoing inter-Cell intra-freq Handover Preparation based on Load
Balance
Short Name
HO.InTraFreqOutPrepSucc.Load Balance
15-199
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing inter-cell handover.
If the handover cause is load balance and the handover type is intra-freq, each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source cell handover preparation completes. The
sampling point changes with the handover type. For details, refer
to the descriptions of Sampling Point of intra-eNodeB handover, X2
interface handover, and S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover preparation completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.25 C373485124
Counter Name
Number of Outgoing inter-Cell intra-freq Handover Preparation Failure based on Load
Balance
Short Name
HO.InTraFreqOutPrepFail.Load Balance
Counter Description
Receipt of the HANDOVER PREPARATION FAILURE message by the eNodeB or timeout
etc. it indicates the handover preparation failure. If the handover cause is load balance
and the handover type is intra-freq, the failure is added to the counter.
15-200
Triggering Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNodeB handover, X2 interface handover, and
S1 interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover preparation fails.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.26 C373485125
Counter Name
Number of Successful Outgoing inter-Cell intra-freq Handover Execution based on Load
Balance
Short Name
HO.InTraFreqOutExecuSucc.Load Balance
Counter Description
When eNodeB receives the UE CONTEXT RELEASE message sent from the target cell
to the source cell or the UE CONTEXT RELEASE COMMAND sent from the MME to the
source eNodeB, it indicates a successful handover.If the handover cause is load balance
and the handover type is intra-freq, the message is added to the counter.
Triggering Point
When the source cell handover completes. The sampling point
changes with the handover type. For details, refer to the descriptions
of Sampling Point of intra-eNodeB handover, X2 interface handover, and
S1 interface handover.
15-201
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution completes.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.27 C373485126
Counter Name
Number of Outgoing inter-Cell intra-freq Handover Execution Failure based on Load
Balance
Short Name
HO.InTraFreqOutExecuFail.Load Balance
Counter Description
Not receipt of the RRCConnectionReestablishmentComplete message by the eNodeB or
timeout etc. it indicates the handover execution failure. If the handover cause is load
balance and the handover type is intra-freq, the failure is added to the counter.
Triggering Point
When the source cell handover fails. The sampling point changes
interface handover.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution fails.
15-202
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.28 C373485133
Counter Name
Number of Outgoing Handover Preparation Attemps(CSFB)
Short Name
-
Counter Description
Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the UE
indicating the attempt of an outgoing handover from EUTRAN to UTRAN or to GERAN or
to CDMA2000 and the handover cause is CSFB. Each MobilityFromEUTRACommand
message or HandoverFromEUTRAPreparationRequest message transmitted is added
to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME and the
handover cause is CSFB.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME and the handover cause is CSFB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-203
Unit
times
15.4.3.29 C373485135
Counter Name
Number of Outgoing Handover Preparation Attemps(Trigged by PCI Modify)
Short Name
-
Counter Description
1 Transmission of the RRCConnectionReconfiguration message to the UE triggering
the intra-eNB handover and the handover cause is PCI modification. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
2 Transmission of the X2AP message HANDOVER REQUEST from the source eNodeB to
the target eNodeB , indicating the attempt of an outgoing inter-eNB handover preparation
or on transmission of S1AP message HANDOVER REQUIRED to the MME.The handover
cause is PCI modification.
3 Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the
UE indicating the attempt of an outgoing handover from EUTRAN to UTRAN or
to GERAN or to CDMA2000 and the handover cause is PCI modification. Each
MobilityFromEUTRACommand message or HandoverFromEUTRAPreparationRequest
message transmitted is added to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is PCI
modification.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is PCI modification.
Counter Type
Accumulated value
15-204
Sampling Period
Event triggered
Unit
times
15.4.3.30 C373485136
Counter Name
Number of Outgoing Handover Preparation Attemps(Trigged by Service Handovers)
Short Name
-
Counter Description
1 Transmission of the RRCConnectionReconfiguration message to the UE triggering the
intra-eNB handover. Each RRCConnectionReconfiguration message transimtted is added
to the counter.
2 Transmission of the X2AP message HANDOVER REQUEST from the source eNB to the
target eNB , indicating the attempt of an outgoing inter-eNB handover preparation or on
transmission of S1AP message HANDOVER REQUIRED to the MME.
3 Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the
UE indicating the attempt of an outgoing handover from EUTRAN to UTRAN or
to GERAN or to CDMA2000. Each MobilityFromEUTRACommand message or
HandoverFromEUTRAPreparationRequest message transmitted is added to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is service.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is service.
Counter Type
Accumulated value
15-205
Sampling Period
Event triggered
Unit
times
15.4.3.31 C373485137
Counter Name
Number of Outgoing Handover Preparation Attemps(Based on Coverage Measurement)
Short Name
-
Counter Description
1 Transmission of the RRCConnectionReconfiguration message to the UE
triggering the intra-eNB handover and the handover cause is coverage. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
2 Transmission of the X2AP message HANDOVER REQUEST from the source eNodeB to
the target eNodeB , indicating the attempt of an outgoing inter-eNB handover preparation
or on transmission of S1AP message HANDOVER REQUIRED to the MME.The handover
cause is coverage.
3 Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the UE
indicating the attempt of an outgoing handover from EUTRAN to UTRAN or to GERAN or
to CDMA2000 and the handover cause is coverage. Each MobilityFromEUTRACommand
message or HandoverFromEUTRAPreparationRequest message transmitted is added
to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends the
HandoverRequest message to the target eNodeB and the handover cause is coverage.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is coverage.
15-206
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.32 C373485138
Counter Name
Number of Outgoing Handover Preparation Attemps(Trigged by Overload balance)
Short Name
-
Counter Description
1 Transmission of the RRCConnectionReconfiguration message to the UE
triggering the intra-eNB handover and the handover cause is LoadBalance. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
2 Transmission of the X2AP message HANDOVER REQUEST from the source eNodeB to
the target eNodeB , indicating the attempt of an outgoing inter-eNB handover preparation
or on transmission of S1AP message HANDOVER REQUIRED to the MME.The handover
cause is LoadBalance.
3 Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the
UE indicating the attempt of an outgoing handover from EUTRAN to UTRAN
or to GERAN or to CDMA2000 and the handover cause is LoadBalance. Each
MobilityFromEUTRACommand message or HandoverFromEUTRAPreparationRequest
message transmitted is added to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends the
HandoverRequest message to the target eNodeB and the handover cause is LoadBalance.
Refer to .
15-207
Update Description
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is mobility
speed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.33 C373485139
Counter Name
Number of Outgoing Handover Preparation Attemps(Based on Mobile Speed)
Short Name
-
Counter Description
1 Transmission of the RRCConnectionReconfiguration message to the UE
triggering the intra-eNB handover and the handover cause is mobility speed. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
2 Transmission of the X2AP message HANDOVER REQUEST from the source eNodeB to
the target eNodeB , indicating the attempt of an outgoing inter-eNB handover preparation
or on transmission of S1AP message HANDOVER REQUIRED to the MME.The handover
cause is mobility speed.
15-208
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is mobility
speed.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is mobility speed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.34 C373485140
Counter Name
Number of Outgoing Handover Preparation Attemps(Based on Energy Saving)
Short Name
-
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is updated.
Refer to .
15-209
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.35 C373485141
Counter Name
Number of Outgoing HO Success(CSFB)
Short Name
-
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is incremented by one.
Counter Type
Accumulated value
15-210
Sampling Period
Event triggered
Unit
times
15.4.3.36 C373485143
Counter Name
Number of Outgoing HO Success(Trigged by PCI Modify)
Short Name
-
Counter Description
1 Transmission of the RRCConnectionReconfiguration message to the UE
triggering the intra-eNB handover and the handover cause is mobility speed. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
2 Transmission of the X2AP message HANDOVER REQUEST from the source eNodeB to
the target eNodeB , indicating the attempt of an outgoing inter-eNB handover preparation
or on transmission of S1AP message HANDOVER REQUIRED to the MME.
3 Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the
UE indicating the attempt of an outgoing handover from EUTRAN to UTRAN or
to GERAN or to CDMA2000 and the handover cause is PCI modificatioon. Each
MobilityFromEUTRACommand message or HandoverFromEUTRAPreparationRequest
message transmitted is added to the counter.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is PCI
modification.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is PCI modification.
Counter Type
Accumulated value
15-211
Sampling Period
Event triggered
Unit
times
15.4.3.37 C373485144
Counter Name
Number of Outgoing HO Success(Trigged by Service Handovers)
Short Name
-
Counter Description
1 Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target (=source) eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter.
2 Receipt at the source eNB of UE CONTEXT RELEASE over the X2 from the target eNB
following a successful handover. Each UE CONTEXT RELEASE message received is
added to the counter.
3 Receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the MME
to the source eNB, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from
the MME or receives the UEContextRelease message from the target eNodeB and the
handover cause is service.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
UEContextReleaseCommand message from the MME or receives the UEContextRelease
message from the target eNodeB and the handover cause is service.
Counter Type
Accumulated value
15-212
Sampling Period
Event triggered
Unit
times
15.4.3.38 C373485145
Counter Name
Number of Outgoing HO Success(Based on Coverage Measurement)
Short Name
-
Counter Description
1 Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target (=source) eNB, indicating a successful outgoing intra-eNB handover. The
handover cause is coverage. Each RRCConnectionReconfigurationComplete message
transimtted is added to the counter.
2 Receipt at the source eNodeB of UE CONTEXT RELEASE over the X2 from the target
eNodeB following a successful handover.The handover cause is coverage. Each UE
CONTEXT RELEASE message received is added to the counter.
3 Receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the MME
to the source eNodeB, indicating a successful IRAT handover. The handover cause is
coverage. Each UE CONTEXT RELEASE COMMAND message received is added to the
counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from
the MME or receives the UEContextRelease message from the target eNodeB and the
handover cause is coverage.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
UEContextReleaseCommand message from the MME or receives the UEContextRelease
message from the target eNodeB and the handover cause is coverage.
Counter Type
Accumulated value
15-213
Sampling Period
Event triggered
Unit
times
15.4.3.39 C373485146
Counter Name
Number of Outgoing HO Success(Trigged by Overload Balance)
Short Name
-
Counter Description
1 Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the
UE to the target (=source) eNB, indicating a successful outgoing intra-eNB handover.
The handover cause is LoadBalance. Each RRCConnectionReconfigurationComplete
message transimtted is added to the counter.
2 Receipt at the source eNodeB of UE CONTEXT RELEASE over the X2 from the target
eNodeB following a successful handover.The handover cause is LoadBalance. Each UE
CONTEXT RELEASE message received is added to the counter.
3 Receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the MME
to the source eNodeB, indicating a successful IRAT handover. The handover cause is
LoadBalance. Each UE CONTEXT RELEASE COMMAND message received is added to
the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from
the MME or receives the UEContextRelease message from the target eNodeB and the
handover cause is LoadBalance.
Refer to .
Update Description
When the source eNodeB sends the HandoverCancel to the MME or target eNodeB due
to other reason.
Counter Type
Accumulated value
15-214
Sampling Period
Event triggered
Unit
times
15.4.3.40 C373485147
Counter Name
Number of Outgoing HO Success(Based on Mobile Speed)
Short Name
-
Counter Description
1 Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the
UE to the target (=source) eNB, indicating a successful outgoing intra-eNB handover.
The handover cause is mobility speed. Each RRCConnectionReconfigurationComplete
message transimtted is added to the counter.
2 Receipt at the source eNodeB of UE CONTEXT RELEASE over the X2 from the target
eNodeB following a successful handover.The handover cause is mobility speed. Each UE
CONTEXT RELEASE message received is added to the counter.
3 Receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the MME
to the source eNodeB, indicating a successful IRAT handover. The handover cause is
mobility speed. Each UE CONTEXT RELEASE COMMAND message received is added
to the counter.
Triggering Point
When the source eNodeB receives the UEContextReleaseCommand message from
the MME or receives the UEContextRelease message from the target eNodeB and the
handover cause is mobility speed.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
UEContextReleaseCommand message from the MME or receives the UEContextRelease
message from the target eNodeB and the handover cause is mobility speed.
Counter Type
Accumulated value
15-215
Sampling Period
Event triggered
Unit
times
15.4.3.41 C373485148
Counter Name
Number of Outgoing HO Success(Based on Energy Saving)
Short Name
-
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by energy saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-216
15.4.3.42 C373485196
Counter Name
Number of Outgoing Handover Preparation Attemps(Based on Self Healing)
Short Name
-
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by self
healing, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by self
healing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.43 C373485197
Counter Name
Number of Outgoing HO Success(Based on Self Healing)
Short Name
-
15-217
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by self healing, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by self healing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.44 C373485198
Counter Name
Number of Outgoing Handover Preparation Attemps(Based on Shut Down or Reset Cell)
Short Name
-
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by cell
shutdown or cell reset, this counter is updated.
Refer to .
15-218
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by cell
shutdown or cell reset, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.45 C373485199
Counter Name
Number of Outgoing HO Success(Based on Shut Down or Reset Cell)
Short Name
-
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by cell shutdown or cell reset, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextReleaseCommand message from the
MME or receives a UEContextRelease message from the target eNodeB, and this
handover is triggered by cell shutdown or cell reset, this counter is incremented by one.
Counter Type
Accumulated value
15-219
Sampling Period
Event triggered
Unit
times
15.4.3.46 C373404500
Counter Name
Number of Cell Reselection based on Load Balance
Short Name
-
Counter Description
After obtaining cell reselection information triggered by load balancing from the
RRM, the RNLC sends the UE a RRCConnectionRelease message (containing the
idleModeMobilityControlInfo IE).
Triggering Point
This counter counts the number of times that load-balancing-based cell reselection is
performed when the RNLC, after obtaining cell reselection information triggered by load
balancing from the RRM, sends the UE a RRCConnectionRelease message (containing
the idleModeMobilityControlInfo IE).
Refer to .
Update Description
This counter is incremented by one when the RNLC, after obtaining cell reselection
information triggered by SPID from the RRM, sends the UE a RRCConnectionRelease
message (containing the idleModeMobilityControlInfo IE).
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-220
15.4.3.47 C373404501
Counter Name
Number of Cell Reselection based on SPID
Short Name
-
Counter Description
After obtaining cell reselection information triggered by SPID from the RRM,
the RNLC sends the UE a RRCConnectionRelease message (containing the
idleModeMobilityControlInfo IE).
Triggering Point
This counter counts the number of times that SPID-triggered cell reselection is performed
when the RNLC, after obtaining cell reselection information triggered by load balancing
from the RRM, sends the UE a RRCConnectionRelease message (containing the
idleModeMobilityControlInfo IE).
Refer to .
Update Description
This counter is incremented by one when the RNLC, after obtaining cell
reselection information triggered by load balancing from the RRM, sends the UE a
RRCConnectionRelease message (containing the idleModeMobilityControlInfo IE).
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.48 C373733200
Counter Name
Number of Outgoing Handover Preparation Attemps
15-221
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.49 C373733201
Counter Name
Number of Outgoing Handover Preparation Attemps based on Covering
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends the
HandoverRequest message to the target eNodeB and the handover cause is coverage.
Refer to .
15-222
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is coverage.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.50 C373733202
Counter Name
Number of Outgoing Handover Preparation Attemps based on Load Balance
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends the
HandoverRequest message to the target eNodeB and the handover cause is load balance.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is load balance.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-223
Unit
times
15.4.3.51 C373733203
Counter Name
Number of Outgoing Handover Preparation Attemps based on Energy Saving
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is CSFB.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is CSFB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.52 C373733204
Counter Name
Number of Outgoing Handover Preparation Attemps based on Mobile Speed
Short Name
-
15-224
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is mobile
speed.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is mobile speed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.53 C373733205
Counter Name
Number of Successful Outgoing Handover Preparation
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the souce eNodeB recieves the HandoverCommand message from the MME or
receives the HandoverRequestAcknowledge message from the target eNodeB.
Refer to .
15-225
Update Description
The counter is incremented by 1 when the souce eNodeB recieves the HandoverCommand
message from the MME or receives the HandoverRequestAcknowledge message from the
target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.54 C373733206
Counter Name
Number of Outgoing Handover Execution Attemps
Short Name
-
Counter Description
The counter is includes the intra-eNB handover, X2 handover and S1 handover.
Triggering Point
When the souce eNodeB sends the RRCConnectionReconfiguration message to the UE
in which includes IE mobilityControlInformation.
Refer to .
Update Description
The counter is incremented by 1 when the souce eNodeB sends the
RRCConnectionReconfiguration message to the UE in which includes IE
mobilityControlInformation.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-226
Unit
times
15.4.3.55 C373733207
Counter Name
Number of Successful Outgoing Handover Execution
Short Name
-
Counter Description
The counter is includes the intra-eNB handover, X2 handover and S1 handover.
Triggering Point
When the souce eNodeB receives the UEContextRelease message from the target
eNodeB or receives the UEContextReleaseCommand message from the MME or receives
the RRCConnectionReconfigurationComplete in intra-eNB handover.
Refer to .
Update Description
The counter is incremented by 1 when the souce eNodeB receives the UEContextRelease
message from the target eNodeB or receives the UEContextReleaseCommand message
from the MME or receives the RRCConnectionReconfigurationComplete in intra-eNB
handover.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.56 C373733208
Counter Name
Number of Outgoing Handover Preparation Attemps based on Traffic
15-227
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is traffic.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is traffic.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.57 C373733209
Counter Name
Number of Outgoing Handover Preparation Attemps based on CSFB
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is CSFB.
Refer to .
15-228
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is CSFB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.58 C373733210
Counter Name
Number of Outgoing Handover Preparation Attemps based on PCI Modification
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is PCI
modification.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is PCI modification.
Counter Type
Accumulated value
15-229
Sampling Period
Event triggered
Unit
times
15.4.3.59 C373733211
Counter Name
Number of Outgoing Handover Preparation Attemps based on Self Healing
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends the
HandoverRequest message to the target eNodeB and the handover cause is self healing.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is self healing.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.60 C373733212
Counter Name
Number of Outgoing Handover Preparation Attemps based on Shutting Down Cell
15-230
Short Name
-
Counter Description
The counter is includes the X2 handover and S1 handover.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME or sends
the HandoverRequest message to the target eNodeB and the handover cause is shutting
down cell.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME or sends the HandoverRequest message to the target eNodeB and
the handover cause is shutting down cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.4.3.61 C373733300
Counter Name
UL Unbalance Degree before HO between Serving Cell and Neighbor Cell
Short Name
-
Counter Description
unbalance_degree_UL_before_HO_i = ABSOLUTE(max(ULT_s, ucUlPRBLBExeThrdZ)
max(ULT_i, ucUlPRBLBExeThrdZ))
ULT_s indicates UL PRB usage of serving cell, ULT_i indicates UL PRB usage of neighbor
cell i, ucUlPRBLBExeThrdZ indicates UL execute threshold of radio resouce for load
balancing.
15-231
Triggering Point
When the period for load balancing is arraving, and the serving cell need to execute load
balancing.
Refer to .
Update Description
The counter is updated when the period for load balancing is arraving, and the serving cell
need to execute load balancing.
Counter Type
Current value
Sampling Period
Event triggered
Unit
percent
15.4.3.62 C373733301
Counter Name
DL Unbalance Degree before HO between Serving Cell and Neighbor Cell
Short Name
-
Counter Description
unbalance_degree_DL_before_HO_i = ABSOLUTE(max(DLT_s, ucDlPRBLBExeThrdZ)
max(DLT_i, ucDlPRBLBExeThrdZ))
DLT_s indicates DL PRB usage of serving cell, DLT_i indicates DL PRB usage of neighbor
cell i, ucDlPRBLBExeThrdZ indicates DL execute threshold of radio resouce for load
balancing.
Triggering Point
When the period for load balancing is arraving, and the serving cell need to execute load
balancing.
Refer to .
15-232
Update Description
The counter is updated when the period for load balancing is arraving, and the serving cell
need to execute load balancing.
Counter Type
Current value
Sampling Period
Event triggered
Unit
percent
15.4.3.63 C373733302
Counter Name
UL Unbalance Degree Estimate after HO between Serving Cell and Neighbor Cell
Short Name
-
Counter Description
unbalance_degree_UL_after_HO_i = ABSOLUTE(max(ULT_s_after,
ucUlPRBLBExeThrdZ) max(ULT_i_after, ucUlPRBLBExeThrdZ))
ULT_s_after indicates estimated UL PRB usage of serving cell after HO, ULT_i_after
indicates estimated UL PRB usage of neighbor cell i after HO, ucUlPRBLBExeThrdZ
indicates UL execute threshold of radio resouce for load balancing.
Triggering Point
When the period for load balancing is arraving, and the serving cell need to execute load
balancing.
Refer to .
Update Description
The counter is updated when the period for load balancing is arraving, and the serving cell
need to execute load balancing.
Counter Type
Current value
15-233
Sampling Period
Event triggered
Unit
percent
15.4.3.64 C373733303
Counter Name
DL Unbalance Degree Estimate after HO between Serving Cell and Neighbor Cell
Short Name
-
Counter Description
unbalance_degree_DL_after_HO_i = ABSOLUTE(max(DLT_s_after,
ucDlPRBLBExeThrdZ) max(DLT_i_after, ucDlPRBLBExeThrdZ))
DLT_s_after indicates estimated DL PRB usage of serving cell after HO, DLT_i_after
indicates estimated DL PRB usage of neighbor cell i after HO, ucDlPRBLBExeThrdZ
indicates DL execute threshold of radio resouce for load balancing.
Triggering Point
When the period for load balancing is arraving, and the serving cell need to execute load
balancing.
Refer to .
Update Description
The counter is updated when the period for load balancing is arraving, and the serving cell
need to execute load balancing.
Counter Type
Current value
Sampling Period
Event triggered
Unit
percent
15-234
l Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
l Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
l Sampling Point 3: The handover execution process.
l Sampling Point 4: The eNodeB receives the
RRCConnectionReconfigurationComplete messge from UE indicating
handover successfully.
l Sampling Point 5: The eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 6: The eNodeB receives the
RRCConnectionReestablishmentRequest message from UE during
intra-eNB handover.
15-235
15-236
15.5.1.3.1 C373600000
Counter Name
Number of Successful Outgoing intra-eNB intra-freq Handover Preparation
Short Name
HO.IntraEnbIntraFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing intra-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.2 C373600001
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbIntraFreqOutPrepFail.UeReSrcCell
15-237
Counter Description
The source cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during the preparation of resources in target cell. The source
reports handover preparation failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in source cell
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.3 C373600002
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.IntraEnbIntraFreqOutPrepFail.DstFail
Counter Description
Because the target cell in eNB has no enough the resources, the source cell reports
handover preparation failure.
Triggering Point
When the eNodeB occurs handover preparation failures in target cell
Refer to .
15-238
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.4 C373600003
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbIntraFreqOutPrepFail.OtherReason
Counter Description
Because the source cell in eNB occurs other failure during handover preparation , it reports
handover preparation failure.
Triggering Point
When the eNodeB occurs handover preparation failures due to other reason in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
due to other reason in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
15-239
Unit
times
15.5.1.3.5 C373600040
Counter Name
Number of Successful Incoming intra-eNB intra-freq Handover Preparation
Short Name
HO.IntraEnbIntraFreqInPrepSucc
Counter Description
The targe cell in eNB has an successful preparation of resources indicating a successful
incoming intra-eNB handover.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
UE in target cell
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.6 C373600041
Counter Name
Number of Incoming intra-eNB intra-freq Handover Preparation Failure due to Resource
Allocation Fail
Short Name
HO.IntraEnbIntraFreqInPrepFail.ResFail
15-240
Counter Description
The targe cell in eNB has an preparation failures of resources indicating a incoming
intra-eNB handover failure.
Triggering Point
When the eNodeB occurs the admission failures in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the admission failures in target
cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.7 C373600042
Counter Name
Number of Incoming intra-eNB intra-freq Handover Preparation Failure due to Dest Occur
Reestblishment
Short Name
HO.IntraEnbIntraFreqInPrepFail.DstReest
Counter Description
The targe cell in eNB has received the RRCConnectionReestablishmentRequest message
from the UE during handover preparation indicating a incoming intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell
15-241
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.8 C373600043
Counter Name
Number of Incoming intra-eNB intra-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbIntraFreqInPrepFail.OtherReason
Counter Description
The targe cell in eNB occurs other failures during handover preparation indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover preparation failures due to other reason in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
due to other reason in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
15-242
Unit
times
15.5.1.3.9 C373600080
Counter Name
Number of Successful Outgoing intra-eNB intra-freq Handover Execution
Short Name
HO.IntraEnbIntraFreqOutExeSucc
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target cell in eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter.
Triggering Point
When the source cell receives the UeContexRelease message from the target cell
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the source cell receives the UeContexRelease
message from the target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.10 C373600081
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbIntraFreqOutExeFail.UeReSrcCell
15-243
Counter Description
The source cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution indicating a outgoing intra-eNB
handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.11 C373600082
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Short Name
HO.IntraEnbIntraFreqOutExeFail.DstReest
Counter Description
The target cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution, the source report handover failure
indicating a outgoing intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell
Refer to Sampling Point 6.
15-244
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.12 C373600083
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbIntraFreqOutExeFail.OtherReason
Counter Description
The source cell in eNB occurs other failures during handover execution indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover execution failures due to other reason in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover execution failures
due to other reason in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-245
15.5.1.3.13 C373600084
Counter Name
Number of Successful Incoming intra-eNB intra-freq Handover Execution
Short Name
HO.IntraEnbIntraFreqInExeSucc
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target cell in eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter
in target cell.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
the UE in target cell
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from the UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.14 C373600085
Counter Name
Number of Incoming intra-eNB intra-freq Handover Execution Failure due to RRC Reconfig
Complete Timeout
Short Name
HO.IntraEnbIntraFreqInExeFail.RRCTimeOut
15-246
Counter Description
After successful the preparation of resources in target cell,the timer of monitoring
RRCConnectionReconfigurationComplete message expires during handover
execution.The target trigger UE release.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires in target cell.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.15 C373600086
Counter Name
Number of Incoming intra-eNB intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Short Name
HO.IntraEnbIntraFreqInExeFail.DstReest
Counter Description
The target cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution, the target report handover failure
indicating a incoming intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell.
Refer to Sampling Point 6.
15-247
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.16 C373600087
Counter Name
Number of Incoming intra-eNB intra-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbIntraFreqInExeFail.OtherReason
Counter Description
The targe cell in eNB occurs other failures during handover execution indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover execution failures due to other reason in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover execution failures
due to other reason in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-248
15.5.1.3.17 C373600088
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.IntraEnbIntraFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, the source cell detects the user inactive then trigger UE release.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.1.3.18 C373600089
Counter Name
Number of Outgoing intra-eNB intra-freq Handover Execution Failure due to Waiting
Reconfiguration Complete timeout
Short Name
HO.IntraEnbIntraFreqOutExeFail.RRCTimeout
15-249
Counter Description
After successful the preparation of resources in target cell during handover execution,the
timer of monitoring RRCConnectionReconfigurationComplete message expires.The target
trigger UE release.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires in target cell.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-250
l Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
l Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
l Sampling Point 5: The source eNodeB occurs timeout for
HandoverRequestAcknowledge message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
15-251
15-252
15-253
Counter Name
Number of Successful Outgoing inter-eNB(via X2) intra-freq Handover Preparation
Short Name
HO.InterEnbX2IntraFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the X2 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
15-254
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.2 C373610301
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to HO
Request ACK Timeout
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.HOTimeOut
Counter Description
After transmission of the HandoverRequst message from the source eNodeB to the MME,
the timer of monitoring the HandoverRequestAck message expires. Then the source
sends the HandoverCancel message to the target eNodeB. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverRequestAck message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverRequestAck message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-255
15.5.2.3.3 C373610302
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.DstFail
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the target
eNodeB, the source receives the HandoverPreparationFailure message from the target
eNodeB. It indicates the handover has failed.Each HandoverPreparationFailure message
received is added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
target eNodeB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.4 C373610303
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.OtherReason
15-256
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the
target eNodeB, the source occurs other failures. Then the source send HandoverCancel
message to the target eNodeB. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.5 C373610304
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the target
eNodeB, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
15-257
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.6 C373610340
Counter Name
Number of Successful Incoming inter-eNB(via X2) intra-freq Handover Preparation
Short Name
HO.InterEnbX2IntraFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB,the target sends the HANDOVER REQUEST ACKNOWLEDGE message to the
source eNodeB indicating the successful preparation of resources.Each HANDOVER
REQUEST ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the source eNodeB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover Request Ack
message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-258
Unit
times
15.5.2.3.7 C373610341
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.InterEnbX2IntraFreqInPrepFail.ResAllocFail
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target has no enough resource
then sends the HANDOVER PREPARATION FAILURE message to the source eNodeB
indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover Preparation failure message to the source
eNodeB due to admission failures.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover Preparation
failure message to the source eNodeB due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.8 C373610342
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Source Cancle HO
15-259
Short Name
HO.InterEnbX2IntraFreqInPrepFail.SrcCancleHO
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target receives the HANDOVER
CANCEL message from the source eNodeB indicating handover failure.Each the
HANDOVER CANCEL message is added to the counter.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.9 C373610343
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2IntraFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target occur other failures then sends
the HANDOVER PREPARATION FAILURE message to the source eNodeB indicating the
handover failures.
15-260
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.10 C373610380
Counter Name
Number of Successful Outgoing inter-eNB(via X2) intra-freq Handover Execution
Short Name
HO.InterEnbX2IntraFreqOutExeSucc
Counter Description
When eNodeB receives a X2AP message UE CONTEXT RELEASE sent from the target
eNodeB to the source eNodeB, it indicates a successful handover over the X2. Each UE
CONTEXT RELEASE message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the detination
eNodeB.
Refer to Sampling Point 16.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the detination eNodeB.
Counter Type
Accumulated value
15-261
Sampling Period
Event triggered
Unit
times
15.5.2.3.11 C373610381
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2IntraFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to the target eNodeB. Each this RRCConnectionReestablishmentRequest
message received is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 20.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-262
15.5.2.3.12 C373610382
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbX2IntraFreqOutExeFail.UeRelTimeOut
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the timer of monitoring the message expires.Then the source trigger
UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 17.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.13 C373610383
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2IntraFreqOutExeFail.OtherReason
15-263
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.14 C373610384
Counter Name
Number of Successful Incoming inter-eNB(via X2) intra-freq Handover Execution
Short Name
HO.InterEnbX2IntraFreqInExeSucc
Counter Description
Transmission of a X2AP message UE CONTEXT RELEASE sent from source eNB to the
target eNodeB, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE message to the source
eNodeB
15-264
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.15 C373610385
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbX2IntraFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE
from target eNB to the source eNodeB,the timer of monitoring the
RRCConnectionReconfigurationComplete message expires.The target trigger local UE
entity release.
Triggering Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfiguration
Complete message expires
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfiguration Complete message expires.
Counter Type
Accumulated value
15-265
Sampling Period
Event triggered
Unit
times
15.5.2.3.16 C373610386
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to Path
Switch Failure
Short Name
HO.InterEnbX2IntraFreqInExeFail.PathFail
Counter Description
After transmission of PATH SWITCH REQUEST message from target eNB to the
MME,the target receives the PATH SWITCH REQUEST FAILURE message from the
MME indicating handover failure.The target trigger UE release. Each the UE CONTEXT
RELEASE message is added to the counter.
Triggering Point
When the target eNodeB receives the PathSwitchRequestFailure message or the timer of
waiting for the PathSwitchACK message expires
Refer to Sampling Point 13, 14.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
PathSwitchRequestFailure message or the timer of waiting for the PathSwitchACK
message expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-266
15.5.2.3.17 C373610387
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2IntraFreqInExeFail.OtherReason
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
target eNB to the source eNodeB,the target occur other failures then trigger UE release
indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.18 C373610388
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to
Source Cancel HO
Short Name
HO.InterEnbX2IntraFreqInExeFail.OtherReason
15-267
Counter Description
After transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB receives
the RRCConnectionReestablishmentRequest message from the UE. The HANDOVER
CANCEL message is sent to by the source eNodeB to the target eNodeB.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.19 C373610389
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbX2IntraFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
The eNodeB detects that the UE's state is "inactive" during handover preparation
Refer to .
15-268
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.2.3.20 C373610390
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2IntraFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to
the target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the source eNodeB indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
15-269
Sampling Period
Event triggered
Unit
times
15.5.2.3.21 C373610391
Counter Name
Number of Incoming inter-eNB(via X2) intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2IntraFreqInExeFail.UeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST
ACKNOWLEDGE from target eNB to the source eNodeB,the target receives the
RRCConnectionReestablishmentRequest message from the UE indicating the handover
failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-270
15.5.2.3.22 C373610392
Counter Name
Number of Outgoing inter-eNB(via X2) intra-freq Handover Preparation Request
Short Name
HO.InterEnbX2IntraFreqOutPrepReq
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
source eNB to the target eNodeB,it indicates the attempt of an outgoing inter-eNB
handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequest message to the target eNodeB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequest
message to the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-271
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
15-272
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
l Sampling Point 10: The target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE.
l Sampling Point 11: The target eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
l Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
l Sampling Point 14: The source eNodeB occurs timeout for
UEContextReleaseCommand message.
15-273
15-274
15.5.3.3.1 C373620600
Counter Name
Number of Successful Outgoing inter-eNB(via S1) intra-freq Handover Preparation
Short Name
HO.InterEnbS1IntraFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the S1 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-275
15.5.3.3.2 C373620601
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.HoTimeOut
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
sends the HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.3 C373620602
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.DstFail
15-276
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationFailures message from the MME. It
indicates the handover has failed.Each HandoverPreparationFailures message received
is added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.4 C373620603
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.OtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
15-277
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.5 C373620604
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
15-278
Sampling Period
Event triggered
Unit
times
15.5.3.3.6 C373620640
Counter Name
Number of Successful Incoming inter-eNB(via S1) intra-freq Handover Preparation
Short Name
HO.InterEnbS1IntraFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.7 C373620641
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Resource Allocation Fail
15-279
Short Name
HO.InterEnbS1IntraFreqInPrepFail.ResFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.8 C373620642
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Source Cancel HO
Short Name
HO.InterEnbS1IntraFreqInPrepFail.SrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
15-280
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.9 C373620643
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1IntraFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
15-281
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.10 C373620680
Counter Name
Number of Successful Outgoing inter-eNB(via S1) intra-freq Handover Execution
Short Name
HO.InterEnbS1IntraFreqOutExeSucc
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful handover over the S1. Each UE
CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-282
15.5.3.3.11 C373620681
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1IntraFreqOutExeFail.UeOut
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 15.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.12 C373620682
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbS1IntraFreqOutExeFail.UeRelTimeOut
15-283
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextReleaseCommand message
expires
Refer to Sampling Point 14.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextReleaseCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.13 C373620683
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1IntraFreqOutExeFail.OtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
15-284
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.14 C373620684
Counter Name
Number of Successful Incoming inter-eNB(via S1) intra-freq Handover Execution
Short Name
HO.InterEnbS1IntraFreqInExeSucc
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message
from UE
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE
Counter Type
Accumulated value
Sampling Period
Event triggered
15-285
Unit
times
15.5.3.3.15 C373620685
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbS1IntraFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.16 C373620686
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to
Source Cancel HO
15-286
Short Name
HO.InterEnbS1IntraFreqInExeFail.SrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.17 C373620687
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1IntraFreqInExeFail.OtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
15-287
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.18 C373620688
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbS1IntraFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
15-288
Sampling Period
Event triggered
Unit
times
15.5.3.3.19 C373620689
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1IntraFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the MME to the
target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-289
15.5.3.3.20 C373620690
Counter Name
Number of Incoming inter-eNB(via S1) intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1IntraFreqInExeFail.UeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the RRCConnectionReestablishmentRequest message from the
UE indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.5.3.3.21 C373620691
Counter Name
Number of Outgoing inter-eNB(via S1) intra-freq Handover Preparation Request
Short Name
HO.InterEnbS1IntraFreqOutPrepReq
15-290
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,it indicates the attempt of an outgoing inter-eNB handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-291
l Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
l Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
l Sampling Point 3: The handover execution process.
l Sampling Point 4: The eNodeB receives the
RRCConnectionReconfigurationComplete messge from UE indicating
handover successfully.
l Sampling Point 5: The eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 6: The eNodeB receives the
RRCConnectionReestablishmentRequest message from UE during
intra-eNB handover.
15-292
15-293
15.6.1.3.1 C373630900
Counter Name
Number of Successful Outgoing intra-eNB inter-freq Handover Preparation
Short Name
HO.IntraEnbInterFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover,it indicates the successful preparation of an outgoing intra-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.2 C373630901
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbInterFreqOutPrepFail.UeReSrcCell
15-294
Counter Description
The source cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during the preparation of resources in target cell. The source
reports handover preparation failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in source cell
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.3 C373630902
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.IntraEnbInterFreqOutPrepFail.DstFail
Counter Description
Because the target cell in eNB has no enough the resources, the source cell reports
handover preparation failure.
Triggering Point
When the eNodeB occurs handover preparation failures in target cell
Refer to .
15-295
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.4 C373630903
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbInterFreqOutPrepFail.OtherReason
Counter Description
Because the source cell in eNB occurs other failure during handover preparation , it reports
handover preparation failure.
Triggering Point
When the eNodeB occurs handover preparation failures due to other reason in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
due to other reason in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
15-296
Unit
times
15.6.1.3.5 C373630940
Counter Name
Number of Successful Incoming intra-eNB inter-freq Handover Preparation
Short Name
HO.IntraEnbInterFreqInPrepSucc
Counter Description
The targe cell in eNB has an successful preparation of resources indicating a successful
incoming intra-eNB handover.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
UE in target cell
Refer to Sampling Point 2.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.6 C373630941
Counter Name
Number of Incoming intra-eNB inter-freq Handover Preparation Failure due to Resource
Allocation Fail
Short Name
HO.IntraEnbInterFreqInPrepFail.ResFail
15-297
Counter Description
The targe cell in eNB has an preparation failures of resources indicating a incoming
intra-eNB handover failure.
Triggering Point
When the eNodeB occurs the admission failures in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs the admission failures in target
cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.7 C373630942
Counter Name
Number of Incoming intra-eNB inter-freq Handover Preparation Failure due to Dst occur
Re-establishment
Short Name
HO.IntraEnbInterFreqInPrepFail.DstReest
Counter Description
The targe cell in eNB has received the RRCConnectionReestablishmentRequest message
from the UE during handover preparation indicating a incoming intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell
15-298
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.8 C373630943
Counter Name
Number of Incoming intra-eNB inter-freq Handover Preparation Failure due to Other
Reason
Short Name
HO.IntraEnbInterFreqInPrepFail.OtherReason
Counter Description
The targe cell in eNB occurs other failures during handover preparation indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover preparation failures due to other reason in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover preparation failures
due to other reason in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
15-299
Unit
times
15.6.1.3.9 C373630980
Counter Name
Number of Successful Outgoing intra-eNB inter-freq Handover Execution
Short Name
HO.IntraEnbInterFreqOutExeSucc
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target cell in eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter.
Triggering Point
When the source cell receives the UeContexRelease message from the target cell
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the source cell receives the UeContexRelease
message from the target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.10 C373630981
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IntraEnbInterFreqOutExeFail.UeReSrcCell
15-300
Counter Description
The source cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution indicating a outgoing intra-eNB
handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.11 C373630982
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Short Name
HO.IntraEnbInterFreqOutExeFail.DstReest
Counter Description
The target cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution, the source report handover failure
indicating a outgoing intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell
Refer to Sampling Point 6.
15-301
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.12 C373630983
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbInterFreqOutExeFail.OtherReason
Counter Description
The source cell in eNB occurs other failures during handover execution indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover execution failures due to other reason in source cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover execution failures
due to other reason in source cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-302
15.6.1.3.13 C373630984
Counter Name
Number of Successful Incoming intra-eNB inter-freq Handover Execution
Short Name
HO.IntraEnbInterFreqInExeSucc
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target cell in eNB, indicating a successful outgoing intra-eNB handover. Each
RRCConnectionReconfigurationComplete message transimtted is added to the counter
in target cell.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message from
the UE in target cell.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message from the UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.14 C373630985
Counter Name
Number of Incoming intra-eNB inter-freq Handover Execution Failure due to RRC Reconfig
Complete Timeout
Short Name
HO.IntraEnbInterFreq.InExeFail.RRCTimeOut
15-303
Counter Description
After successful the preparation of resources in target cell,the timer of monitoring
RRCConnectionReconfigurationComplete message expires during handover
execution.The target trigger UE release.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires in target cell.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.15 C373630986
Counter Name
Number of Incoming intra-eNB inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Short Name
HO.IntraEnbInterFreqInExeFail.DstReest
Counter Description
The target cell in eNB has received the RRCConnectionReestablishmentRequest
message from the UE during handover execution, the target report handover failure
indicating a incoming intra-eNB handover failure.
Triggering Point
When the eNodeB receives the RRCConnectionReestablishmentRequest message from
UE in target cell.
Refer to Sampling Point 6.
15-304
Update Description
The counter is incremented by 1 when the eNodeB receives the
RRCConnectionReestablishmentRequest message from UE in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.16 C373630987
Counter Name
Number of Incoming intra-eNB inter-freq Handover Execution Failure due to Other Cause
Short Name
HO.IntraEnbInterFreqInExeFail.OtherReason
Counter Description
The targe cell in eNB occurs other failures during handover execution indicating an
incoming intra-eNB handover failure.
Triggering Point
When the eNodeB occurs handover execution failures due to other reason in target cell
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB occurs handover execution failures
due to other reason in target cell
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-305
15.6.1.3.17 C373630988
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.IntraEnbInterFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, the source cell detects the user inactive then trigger UE release.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.1.3.18 C373630989
Counter Name
Number of Outgoing intra-eNB inter-freq Handover Execution Failure due to Waiting
Reconfiguration Complete Timeout
Short Name
HO.IntraEnbInterFreqOutExeFail.RRCTimeOut
15-306
Counter Description
After successful the preparation of resources in target cell during handover execution,the
timer of monitoring RRCConnectionReconfigurationComplete message expires.The target
trigger UE release.
Triggering Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete
message expires in target cell.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-307
l Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
l Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
l Sampling Point 5: The source eNodeB occurs timeout for
HandoverRequestAcknowledge message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
15-308
15-309
15-310
Counter Name
Number of Successful Outgoing inter-eNB(via X2) inter-freq Handover Preparation
Short Name
HO.InterEnbX2InterFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the X2 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
15-311
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.2 C373641201
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to HO
Request ACK Timeout
Short Name
HO.InterEnbX2InterFreqOutPrepFail.HOTimeOut
Counter Description
After transmission of the HandoverRequst message from the source eNodeB to the MME,
the timer of monitoring the HandoverRequestAck message expires. Then the source
sends the HandoverCancel message to the target eNodeB. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverRequestAck message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverRequestAck message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-312
15.6.2.3.3 C373641202
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Short Name
HO.InterEnbX2InterFreqOutPrepFail.DstFail
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the target
eNodeB, the source receives the HandoverPreparationFailure message from the target
eNodeB. It indicates the handover has failed.Each HandoverPreparationFailure message
received is added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
target eNodeB.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.4 C373641203
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2InterFreqOutPrepFail.OtherReason
15-313
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the
target eNodeB, the source occurs other failures. Then the source send HandoverCancel
message to the target eNodeB. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.5 C373641204
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2InterFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequest message from the source eNodeB to the target
eNodeB, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
15-314
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.6 C373641240
Counter Name
Number of Successful Incoming inter-eNB(via X2) inter-freq Handover Preparation
Short Name
HO.InterEnbX2InterFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB,the target sends the HANDOVER REQUEST ACKNOWLEDGE message to the
source eNodeB indicating the successful preparation of resources.Each HANDOVER
REQUEST ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends Handover Request Ack message to the source eNodeB.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover Request Ack
message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-315
Unit
times
15.6.2.3.7 C373641241
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.InterEnbX2InterFreqInPrepFail.ResFail
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target has no enough resource
then sends the HANDOVER PREPARATION FAILURE message to the source eNodeB
indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover Preparation failure message to the source
eNodeB due to admission failures.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover Preparation
failure message to the source eNodeB due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.8 C373641242
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Source Cancel HO
15-316
Short Name
HO.InterEnbX2InterFreqInPrepFail.SrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target receives the HANDOVER
CANCEL message from the source eNodeB indicating handover failure.Each the
HANDOVER CANCEL message is added to the counter.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.9 C373641243
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbX2InterFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to the target
eNodeB to request the preparation of resources,the target occur other failures then sends
the HANDOVER PREPARATION FAILURE message to the source eNodeB indicating the
handover failures.
15-317
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.10 C373641280
Counter Name
Number of Successful Outgoing inter-eNB(via X2) inter-freq Handover Execution
Short Name
HO.InterEnbX2InterFreqOutExeSucc
Counter Description
When eNodeB receives a X2AP message UE CONTEXT RELEASE sent from the target
eNodeB to the source eNodeB, it indicates a successful handover over the X2. Each UE
CONTEXT RELEASE message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the detination
eNodeB.
Refer to Sampling Point 16.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the detination eNodeB.
Counter Type
Accumulated value
15-318
Sampling Period
Event triggered
Unit
times
15.6.2.3.11 C373641281
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbX2InterFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to the target eNodeB. Each this RRCConnectionReestablishmentRequest
message received is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 20.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-319
15.6.2.3.12 C373641282
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbX2InterFreqOutExeFail.UeRelTimeOut
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the timer of monitoring the message expires.Then the source trigger
UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 17.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.13 C373641283
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2InterFreqOutExeFail.OtherReason
15-320
Counter Description
Before receipt of a X2AP message UE CONTEXT RELEASE sent from the target eNodeB
to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.14 C373641284
Counter Name
Number of Successful Incoming inter-eNB(via X2) inter-freq Handover Execution
Short Name
HO.InterEnbX2InterFreqInExeSucc
Counter Description
Transmission of a X2AP message UE CONTEXT RELEASE sent from source eNB to the
target eNodeB, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE message to the source
eNodeB
15-321
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE message to the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.15 C373641285
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbX2InterFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST
ACKNOWLEDGE from target eNB to the source eNodeB,the timer of monitoring
RRCConnectionReconfigurationComplete message expires.The target trigger local
UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfiguration Complete message expires.
Counter Type
Accumulated value
15-322
Sampling Period
Event triggered
Unit
times
15.6.2.3.16 C373641286
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to Path
Switch Failure
Short Name
HO.InterEnbX2InterFreqInExeFail.PathFail
Counter Description
After transmission of PATH SWITCH REQUEST message from target eNB to the
MME,the target receives the PATH SWITCH REQUEST FAILURE message from the
MME indicating handover failure.The target trigger UE release. Each the UE CONTEXT
RELEASE message is added to the counter.
Triggering Point
When the target eNodeB receives the PathSwitchRequestFailure message or the timer of
waiting for the PathSwitchACK message expires
Refer to Sampling Point 13, 14.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
PathSwitchRequestFailure message or the timer of waiting for the PathSwitchACK
message expires.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-323
15.6.2.3.17 C373641287
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbX2InterFreqInExeFail.OtherReason
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
target eNB to the source eNodeB,the target occur other failures then trigger UE release
indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.18 C373641288
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to
Source Cancel HO
Short Name
HO.InterEnbX2InterFreqInExeFail.SrcCancelHO
15-324
Counter Description
After transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB receives
the RRCConnectionReestablishmentRequest message from the UE. The HANDOVER
CANCEL message is sent to by the source eNodeB to the target eNodeB.
Triggering Point
When the target eNodeB receives Handover Cancel message from the source eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives Handover Cancel
message from the source eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.19 C373641289
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbX2InterFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
15-325
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.2.3.20 C373641290
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2InterFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the source eNodeB to
the target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the source eNodeB indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
15-326
Sampling Period
Event triggered
Unit
times
15.6.2.3.21 C373641291
Counter Name
Number of Incoming inter-eNB(via X2) inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbX2InterFreqInExeFail.UeOut
Counter Description
After transmission of a X2AP message HANDOVER REQUEST
ACKNOWLEDGE from target eNB to the source eNodeB,the target receives the
RRCConnectionReestablishmentRequest message from the UE indicating the handover
failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-327
15.6.2.3.22 C373641292
Counter Name
Number of Outgoing inter-eNB(via X2) inter-freq Handover Preparation Request
Short Name
HO.InterEnbX2IntraFreqOutPrepReq
Counter Description
After transmission of a X2AP message HANDOVER REQUEST ACKNOWLEDGE from
source eNB to the target eNodeB,it indicates the attempt of an outgoing inter-eNB
handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequest message to the target eNodeB.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequest
message to the target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-328
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
15-329
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
l Sampling Point 10: The target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE.
l Sampling Point 11: The target eNodeB occurs timeout for
RRCConnectionReconfigurationComplete.
l Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
l Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
l Sampling Point 14: The source eNodeB occurs timeout for
UEContextReleaseCommand message.
15-330
15-331
15.6.3.3.1 C373651500
Counter Name
Number of Successful Outgoing inter-eNB(via S1) inter-freq Handover Preparation
Short Name
HO.InterEnbS1InterFreqOutPrepSucc
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering
the handover over the S1 from the source eNodeB to the target eNodeB,it
indicates the successful preparation of an outgoing inter-eNB handover. Each
RRCConnectionReconfiguration message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 8.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-332
15.6.3.3.2 C373651501
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.InterEnbS1InterFreqOutPrepFail.HOTimeOut
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
sends the HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.3 C373651502
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to Dst
Preparation Failure
Short Name
HO.InterEnbS1InterFreqOutPrepFail.DstFail
15-333
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.4 C373651503
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1InterFreqOutPrepFail.OtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
15-334
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.5 C373651504
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1InterFreqOutPrepFail.UeReSrcCell
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE. It indicates the handover fails.
Triggering Point
When the source eNodeB receives the RRC CONNECTION REESTABLISHMENT
REQUEST message from the UE during handover preparation.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the RRC
CONNECTION REESTABLISHMENT REQUEST message from the UE during handover
preparation.
Counter Type
Accumulated value
15-335
Sampling Period
Event triggered
Unit
times
15.6.3.3.6 C373651540
Counter Name
Number of Successful Incoming inter-eNB(via S1) inter-freq Handover Preparation
Short Name
HO.InterEnbS1InterFreqInPrepSucc
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.7 C373651541
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Resource Allocation Fail
15-336
Short Name
HO.InterEnbS1InterFreqInPrepFail.ResFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.8 C373651542
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Source Cancel HO
Short Name
HO.InterEnbS1InterFreqInPrepFail.SrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
15-337
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.9 C373651543
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Other Reason
Short Name
HO.InterEnbS1InterFreqInPrepFail.OtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
15-338
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.10 C373651580
Counter Name
Number of Successful Outgoing inter-eNB(via S1) inter-freq Handover Execution
Short Name
HO.InterEnbS1InterFreqOutExeSucc
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful handover over the S1. Each UE
CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-339
15.6.3.3.11 C373651581
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.InterEnbS1InterFreqOutExeFail.UeReSrcCell
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 15.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.12 C373651582
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.InterEnbS1InterFreqOutExeFail.UeRelTimeOut
15-340
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 14.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.13 C373651583
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1InterFreqOutExeFail.OtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
15-341
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.14 C373651584
Counter Name
Number of Successful Incoming inter-eNB(via S1) inter-freq Handover Execution
Short Name
HO.InterEnbS1InterFreqInExeSucc
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message
from UE
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE
Counter Type
Accumulated value
Sampling Period
Event triggered
15-342
Unit
times
15.6.3.3.15 C373651585
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.InterEnbS1InterFreqInExeFail.RRCTimeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.16 C373651586
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to
Source Cancel HO
15-343
Short Name
HO.InterEnbS1InterFreqInExeFail.SrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.17 C373651587
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to Other
Cause
Short Name
HO.InterEnbS1InterFreqInExeFail.OtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
15-344
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.18 C373651588
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Failure due to User
Inactivity
Short Name
HO.InterEnbS1InterFreqOutPrepFail.UserInactive
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
15-345
Sampling Period
Event triggered
Unit
times
15.6.3.3.19 C373651589
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1InterFreqInPrepFail.UeOut
Counter Description
After receipt of the HandoverRequest message sent by the MME to the
target eNodeB to request the preparation of resources,the target receives the
RRCConnectionReestablishmentRequest message from the UE then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-346
15.6.3.3.20 C373651590
Counter Name
Number of Incoming inter-eNB(via S1) inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Short Name
HO.InterEnbS1InterFreqInExeFail.UeOut
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,the target receives the RRCConnectionReestablishmentRequest message from the
UE indicating the handover failures.
Triggering Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message
from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.6.3.3.21 C373651591
Counter Name
Number of Outgoing inter-eNB(via S1) inter-freq Handover Preparation Request
Short Name
HO.InterEnbS1InterFreqOutPrepReq
15-347
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to the
MME,it indicates the attempt of an outgoing inter-eNB handover preparation.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME.
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverRequired
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-348
15-349
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
15-350
15-351
Counter Name
Number of Successful Incoming inter-RAT(UTRAN->LTE) Handover Preparation
15-352
Short Name
HO.IartInPrepareSucc.UTRAN2LTE
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.2 C373661801
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.IartInPrepareFail.UTRAN2LTEResAllocFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
15-353
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.3 C373661802
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure due to
Source Cancel HO
Short Name
HO.IartInPrepareFail.UTRAN2LTESrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
15-354
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.4 C373661803
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartInPrepareFail.UTRAN2LTEOtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-355
15.7.1.3.5 C373661804
Counter Name
Number of Successful Incoming inter-RAT(UTRAN->LTE) Handover Execution
Short Name
HO.IartInExecutSucc.UTRAN2LTE
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB sends the UE CONTEXT RELEASE COMMAND message to
MME.
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the target eNodeB sends the UE CONTEXT
RELEASE COMMAND message to MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.6 C373661805
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.IartInExecutFail.UTRAN2LTECompleteTimeout
15-356
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from MME to source
eNodeB,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.7 C373661806
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Execution Failure due to Source
Cancel HO
Short Name
HO.IartInExecutFail.UTRAN2LTESrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from MME to source
eNodeB,the target receives the UE CONTEXT RELEASE COMMAND message indicating
handover failure.The target trigger UE release. Each the UE CONTEXT RELEASE
COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
15-357
Update Description
The counter is incremented by 1 when the target eNodeB receives
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.8 C373661807
Counter Name
Number of Incoming inter-RAT(UTRAN->LTE) Handover Execution Failure due to Other
Cause
Short Name
HO.IartInExecutFail.UTRAN2LTEOtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from MME to source
eNodeB,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-358
Unit
times
15.7.1.3.9 C373661808
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) Handover Preparation
Short Name
HO.IartOutPrepareSucc.LTE2UTRAN
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the eNodeB to the UTRAN,it indicates the successful preparation of
an outgoing inter-eNB handover. Each RRCConnectionReconfiguration message
transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.10 C373661809
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.IartOutPrepareFail.LTE2UTRANHoTimeOut
15-359
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
send HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.11 C373661810
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to Dst
Preparation Failure
Short Name
HO.IartOutPrepareFail.LTE2UTRANDstPreFail
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationfailure message from the MME. It
indicates the handover has failed.Each HandoverPreparationfailure message received is
added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to Sampling Point 7.
15-360
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.12 C373661811
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartOutPrepareFail.LTE2UTRANOtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-361
Unit
times
15.7.1.3.13 C373661812
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) Handover Execution
Short Name
HO.IartOutExecutSucc.LTE2UTRAN
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->UTRAN).
Each UE CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.14 C373661813
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN)Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IartOutExecutFail.LTE2UTRANUeReSrcCell
15-362
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.15 C373661814
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.IartOutExecutFail.LTE2UTRANUeRelTimeOut
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 14.
15-363
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.1.3.16 C373661815
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Execution Failure due to Other
Cause
Short Name
HO.IartOutExecutFail.LTE2UTRANOtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-364
Unit
times
15.7.1.3.17 C373661816
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure due to User
Inactivity
Short Name
-
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-365
15-366
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
15-367
15-368
Counter Name
Number of Successful Incoming inter-RAT(CDMA->LTE) Handover Preparation
15-369
Short Name
HO.IartInPrepareSucc.CDMA2LTE
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.2 C373672101
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.IartInPrepareFail.CDMA2LTEResAllocFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
15-370
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.3 C373672102
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Preparation Failure due to Source
Cancel HO
Short Name
HO.IartInPrepareFail.CDMA2LTESrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
15-371
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.4 C373672103
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartInPrepareFail.CDMA2LTEOtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-372
15.7.2.3.5 C373672104
Counter Name
Number of Successful Incoming inter-RAT(CDMA->LTE) Handover Execution
Short Name
HO.IartInExecutSucc.CDMA2LTE
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from source
eNB to the MME, indicating a successful IRAT handover. Each UE CONTEXT RELEASE
COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message
from UE
Refer to Sampling Point 10.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.6 C373672105
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.IartInExecutFail.CDMA2LTECompleteTimeout
15-373
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNB to
the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.7 C373672106
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Execution Failure due to Source
Cancel HO
Short Name
HO.IartInExecutFail.CDMA2LTESrcCancelHO
Counter Description
After transmission of a S1AP message HandoverRequestAcknowledge from target
eNodeB to MME,the target eNodeB receives the UE CONTEXT RELEASE COMMAND
message indicating handover failure.The target trigger UE release. Each the UE
CONTEXT RELEASE COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
15-374
Update Description
The counter is incremented by 1 when the target eNodeB receives the
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.8 C373672107
Counter Name
Number of Incoming inter-RAT(CDMA->LTE) Handover Execution Failure due to Other
Cause
Short Name
HO.IartInExecutFail.CDMA2LTEOtherReason
Counter Description
After transmission of a S1AP message HandoverRequestAcknowledge from target
eNodeB to MME,the target occur other failures then trigger UE release indicating
handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-375
Unit
times
15.7.2.3.9 C373672108
Counter Name
Number of Successful Outgoing inter-RAT(LTE->CDMA) Handover Preparation
Short Name
HO.IartOutPrepareSucc.LTE2CDMA
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the eNodeB to the CDMA,it indicates the successful preparation of
an outgoing inter-eNB handover. Each RRCConnectionReconfiguration message
transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.10 C373672109
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.IartOutPrepareFail.LTE2CDMAHoTimeOut
15-376
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
send HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.11 C373672110
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to Dst
Preparation Failure
Short Name
HO.IartOutPrepareFail.LTE2CDMADstPreFail
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationfailure message from the MME. It
indicates the handover has failed.Each HandoverPreparationfailure message received is
added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to .
15-377
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.12 C373672111
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartOutPrepareFail.LTE2CDMAOtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-378
Unit
times
15.7.2.3.13 C373672112
Counter Name
Number of Successful Outgoing inter-RAT(LTE->CDMA) Handover Execution
Short Name
HO.IartOutExecutSucc.LTE2CDMA
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->UTRAN).
Each UE CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.14 C373672113
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA)Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IartOutExecutFail.LTE2CDMAUeReSrcCell
15-379
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.15 C373672114
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Execution Failure due to UE
Context Release Timeout
Short Name
HO.IartOutExecutFail.LTE2CDMAUeRelTimeOut
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 7.
15-380
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.2.3.16 C373672115
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Execution Failure due to Other
Cause
Short Name
HO.IartOutExecutFail.LTE2CDMAOtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-381
Unit
times
15.7.2.3.17 C373672116
Counter Name
Number of Outgoing inter-RAT(LTE->CDMA) Handover Preparation Failure due to User
Inactivity
Short Name
-
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to Sampling Point 13.
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-382
15-383
l Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
l Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
l Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
l Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
l Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
l Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
l Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
l Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
15-384
15-385
15.7.3.3.1 C373682400
Counter Name
Number of Successful Incoming inter-RAT(GSM->LTE) Handover Preparation
15-386
Short Name
HO.IartInPrepareSucc.GSM2LTE
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB,the
target sends the HANDOVER REQUEST ACKNOWLEDGE message to the MME
indicating the successful preparation of resources.Each HANDOVER REQUEST
ACKNOWLEDGE message is added to the counter.
Triggering Point
When the target eNodeB sends the HandoverRequestAck message to the MME.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the HandoverRequestAck
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.2 C373682401
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Preparation Failure due to
Resource Allocation Fail
Short Name
HO.IartInPrepareFail.GSM2LTEResAllocFail
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB to
request the preparation of resources,the target has no enough resource then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
15-387
Triggering Point
When the target eNodeB sends Handover failure message to the MME due to admission
failures.
Refer to Sampling Point 14.
Update Description
The counter is incremented by 1 when the target eNodeB sends Handover failure message
to the MME due to admission failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.3 C373682402
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Preparation Failure due to Source
Cancel HO
Short Name
HO.IartInPrepareFail.GSM2LTESrcCancelHO
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target receives the UE CONTEXT RELEASE
COMMAND message from the MME indicating handover failure.Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from the MME.
15-388
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.4 C373682403
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartInPrepareFail.GSM2LTEOtherReason
Counter Description
After receipt of the HandoverRequest message sent by the MME to the target eNodeB
to request the preparation of resources,the target occur other failures then sends the
HANDOVER FAILURE message to the MME indicating the handover failures.
Triggering Point
When the target eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-389
15.7.3.3.5 C373682404
Counter Name
Number of Successful Incoming inter-RAT(GSM>LTE) Handover Execution
Short Name
HO.IartInExecutSucc.GSM2LTE
Counter Description
Transmission of a S1AP message UE CONTEXT RELEASE COMMAND sent from
source eNodeB to the MME, indicating a successful IRAT handover. Each UE CONTEXT
RELEASE COMMAND message received is added to the counter.
Triggering Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message
from UE
Refer to Sampling Point 4.
Update Description
The counter is incremented by 1 when the target eNodeB receives the
RRCConnectionReconfigurationComplete message from UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.6 C373682405
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Short Name
HO.IartInExecutFail.GSM2LTECompleteTimeout
15-390
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNodeB
to the MME,the timer of monitoring RRCConnectionReconfigurationComplete message
expires.The target trigger local UE entity release.
Triggering Point
When the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Refer to Sampling Point 6.
Update Description
The counter is incremented by 1 when the target eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.7 C373682406
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Execution Failure due to Source
Cancel HO
Short Name
HO.IartInExecutFail.GSM2LTESrcCancelHO
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNodeB
to the MME,the target receives the UE CONTEXT RELEASE COMMAND message
indicating handover failure.The target trigger UE release. Each the UE CONTEXT
RELEASE COMMAND message is added to the counter.
Triggering Point
When the target eNodeB receives the UEContextReleaseCommand message from MME
Refer to .
15-391
Update Description
The counter is incremented by 1 When the target eNodeB receives the
UEContextReleaseCommand message from MME
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.8 C373682407
Counter Name
Number of Incoming inter-RAT(GSM>LTE) Handover Execution Failure due to Other
Cause
Short Name
HO.IartInExecutFail.GSM2LTEOtherReason
Counter Description
After transmission of a S1AP message HANDOVER COMMAND from source eNodeB to
the MME,the target occur other failures then trigger UE release indicating handover failure.
Triggering Point
When the target eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-392
Unit
times
15.7.3.3.9 C373682408
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GSM) Handover Preparation
Short Name
HO.IartOutPrepareSucc.LTE2GSM
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the eNodeB to the GSM,it indicates the successful preparation of an
outgoing inter-eNodeB handover. Each RRCConnectionReconfiguration message
transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfiguration message to the UE
Refer to Sampling Point 12.
Update Description
The counter is incremented by 1 when the source eNodeB sends the
RRCConnectionReconfiguration message to the UE
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.10 C373682409
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to HO
Command Timeout
Short Name
HO.IartOutPrepareFail.LTE2GSMHoTimeOut
15-393
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the timer of monitoring the HandoverCommand message expires. Then the source
send HandoverCancel message to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB's timer of waiting for the HandoverCommand message expires
Refer to Sampling Point 11.
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
HandoverCommand message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.11 C373682410
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to Dst
Preparation Failure
Short Name
HO.IartOutPrepareFail.LTE2GSMDstPreFail
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source receives the HandoverPreparationfailure message from the MME. It
indicates the handover has failed.Each HandoverPreparationfailure message received is
added to the counter.
Triggering Point
When the source eNodeB receives the Handover Preparation failure message from the
MME.
Refer to .
15-394
Update Description
The counter is incremented by 1 when the source eNodeB receives the Handover
Preparation failure message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.12 C373682411
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to Other
Reason
Short Name
HO.IartOutPrepareFail.LTE2GSMOtherReason
Counter Description
After transmission of the HandoverRequired message from the source eNodeB to the
MME, the source occurs other failures. Then the source send HandoverCancel message
to the MME. It indicates the handover fails.
Triggering Point
When the source eNodeB occurs handover preparation failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover preparation
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-395
Unit
times
15.7.3.3.13 C373682412
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GSM) Handover Execution
Short Name
HO.IartOutExecutSucc.LTE2GSM
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->UTRAN).
Each UE CONTEXT RELEASE COMMAND message received is added to the counter.
Triggering Point
When the source eNodeB receives the UE Context Release message from the MME.
Refer to Sampling Point 3.
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.14 C373682413
Counter Name
Number of Outgoing inter-RAT(LTE->GSM)Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Short Name
HO.IartOutExecutFail.LTE2GSMUeReSrcCell
15-396
Counter Description
Receipt of a RRCConnectionReestablishmentRequest message by the source eNodeB
from the UE during handover, the HANDOVER CANCEL message is sent to by the source
eNodeB to MME. Each this RRCConnectionReestablishmentRequest message received
is added to the counter.
Triggering Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest
message from the UE.
Refer to Sampling Point 5.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
RRCConnectionReestablishmentRequest message from the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.15 C373682414
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Execution Failure due to UE Context
Release Timeout
Short Name
HO.IartOutExecutFail.LTE2GSMUeRelTimeOut
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the timer of monitoring the message expires.Then the source
trigger UE release.
Triggering Point
When the source eNodeB's timer of waiting for the UEContextRelease message expires
Refer to Sampling Point 7.
15-397
Update Description
The counter is incremented by 1 when the source eNodeB's timer of waiting for the
UEContextRelease message expires
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.7.3.3.16 C373682415
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Execution Failure due to Other
Cause
Short Name
HO.IartOutExecutFail.LTE2GSMOtherReason
Counter Description
Before receipt of a S1AP message UE CONTEXT RELEASE COMMAND sent from the
MME to the source eNodeB,the other reason occurs.Then the source trigger UE release.
Triggering Point
When the source eNodeB occurs handover execution failures due to other reason
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB occurs handover execution
failures due to other reason
Counter Type
Accumulated value
Sampling Period
Event triggered
15-398
Unit
times
15.7.3.3.17 C373682416
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Handover Preparation Failure due to User
Inactivity
Short Name
-
Counter Description
Before transmission of the RRCConnectionReconfiguration message to UE triggering the
handover from the source eNodeB to the target eNodeB, the source eNodeB detects the
user inactive. The HANDOVER CANCEL message is sent to by the eNodeB to the MME.
Each the condition is added to the counter.
Triggering Point
When UE's state detected by eNodeB is "user inactive" in source eNodeB during handover
preparation
Refer to .
Update Description
The counter is incremented by 1 when UE's state detected by eNodeB is "user inactive" in
source eNodeB during handover preparation.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-399
15.8.1.3.1 C373661817
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) SRVCC Handover Preparation Request
Short Name
HO.Srvcc.IartOutPrepareReq.LTE1UTRAN
Counter Description
Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNB to the UE
indicating the attempt of an outgoing handover for SRVCC from EUTRAN to UTRAN.
Each MobilityFromEUTRACommand message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the MobilityFromEUTRACommand message to the UE
Refer to .
15-400
Update Description
The counter is incremented by 1 when the source eNodeB sends the
MobilityFromEUTRACommand message for SRVCC to the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.8.1.3.2 C373661818
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) SRVCC Handover Preparation Failure
Short Name
HO.Srvcc.IartOutPrepareFail.LTE2UTRAN
Counter Description
Receipt of the HANDOVER PREPARATION FAILURE message by The eNodeB or timeout
etc. it indicates the handover preparation failure. If the handover is SRVCC, the failure is
added to the counter.
Triggering Point
When the source eNodeB receives the HANDOVER PREPARATION FAILURE message
or the RRCConnectionReestablishmentRequest or occurs timeout indicating SRVCC
handover prepraration failures.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the HANDOVER
PREPARATION FAILURE message or the RRCConnectionReestablishmentRequest or
occurs timeout indicating SRVCC handover prepraration failures.
Counter Type
Accumulated value
15-401
Sampling Period
Event triggered
Unit
times
15.8.1.3.3 C373661819
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) SRVCC Handover Execution
Short Name
HO.Srvcc.IartOutExecutSucc.LTE2UTRAN
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->UTRAN)
for SRVCC. Each UE CONTEXT RELEASE COMMAND message received is added to
the counter.
Triggering Point
When the source eNodeB receives the UE Context Release Command message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release command message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.8.1.3.4 C373661820
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) SRVCC Handover Execution Failure
15-402
Short Name
HO.Srvcc.IartOutExecutFail.LTE3UTRAN
Counter Description
Not receipt of the RRCConnectionReestablishmentComplete message by The eNodeB or
timeout etc. it indicates the handover execution failure. If the handover cause is SRVCC
from LTE to UTRAN, the failure is added to the counter.
Triggering Point
When the source cell handover fails for SRVCC from LTE to UTRAN.
Refer to .
Update Description
The counter is incremented by 1 when the source cell handover execution fails for SRVCC
from LTE to UTRAN.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-403
15.8.2.3.1 C373682417
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) SRVCC Handover Preparation Request
Short Name
HO.Srvcc.IartOutPrepareReq.LTE1GSM
Counter Description
Transmission of the MobilityFromEUTRACommand message or the
HandoverFromEUTRAPreparationRequest message from the serving eNodeB to the UE
indicating the attempt of an outgoing handover for SRVCC from EGSM to GSM. Each
MobilityFromEUTRACommand message transimtted is added to the counter.
Triggering Point
When the source eNodeB sends the MobilityFromEUTRACommand message to the UE
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the
MobilityFromEUTRACommand message for SRVCC to the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-404
15.8.2.3.2 C373682418
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) SRVCC Handover Preparation Failure
Short Name
HO.Srvcc.IartOutPrepareFail.LTE2GSM
Counter Description
Receipt of the HANDOVER PREPARATION FAILURE message by The eNodeB or timeout
etc. it indicates the handover preparation failure. If the handover is SRVCC, the failure is
added to the counter.
Triggering Point
When the source eNodeB receives the HANDOVER PREPARATION FAILURE message
or the RRCConnectionReestablishmentRequest or occurs timeout indicating SRVCC
handover prepraration failures.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the HANDOVER
PREPARATION FAILURE message or the RRCConnectionReestablishmentRequest or
occurs timeout indicating SRVCC handover prepraration failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.8.2.3.3 C373682419
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GSM) SRVCC Handover Execution
Short Name
HO.Srvcc.IartOutExecutSucc.LTE2GSM
15-405
Counter Description
When eNodeB receives a S1AP message UE CONTEXT RELEASE COMMAND sent from
the MME to the source eNodeB, it indicates a successful IRAT handover(LTE->GSM) for
SRVCC. Each UE CONTEXT RELEASE COMMAND message received is added to the
counter.
Triggering Point
When the source eNodeB receives the UE Context Release Command message from the
MME.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the UE Context
Release command message from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.8.2.3.4 C373682420
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) SRVCC Handover Execution Failure
Short Name
HO.Srvcc.IartOutExecutFail.LTE3GSM
Counter Description
Not receipt of the RRCConnectionReestablishmentComplete message by The eNodeB or
timeout etc. it indicates the handover execution failure. If the handover cause is SRVCC
from LTE to GSM, the failure is added to the counter.
Triggering Point
When the source cell handover fails for SRVCC from LTE to GSM.
Refer to .
15-406
Update Description
The counter is incremented by 1 when the source cell handover execution fails for SRVCC
from LTE to GSM.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4 C373743405 Report Times of RSRP Value in the range of -140 to -121 of Serving Cell
5 C373743406 Report Times of RSRP Value in the range of -120 to -116 of Serving Cell
6 C373743407 Report Times of RSRP Value in the range of -115 to -111 of Serving Cell
7 C373743408 Report Times of RSRP Value in the range of -110 to -106 of Serving Cell
8 C373743409 Report Times of RSRP Value in the range of -105 to -101 of Serving Cell
9 C373743410 Report Times of RSRP Value in the range of -100 to -96 of Serving Cell
10 C373743411 Report Times of RSRP Value in the range of -95 to -91 of Serving Cell
11 C373743412 Report Times of RSRP Value in the range of -90 to -86 of Serving Cell
12 C373743413 Report Times of RSRP Value in the range of -85 to -81 of Serving Cell
13 C373743414 Report Times of RSRP Value in the range of -80 to -76 of Serving Cell
15-407
14 C373743415 Report Times of RSRP Value in the range of -75 to -71 of Serving Cell
15 C373743416 Report Times of RSRP Value in the range of -70 to -61 of Serving Cell
16 C373743417 Report Times of RSRP Value in the range of -60 to -43 of Serving Cell
20 C373743504 Report Times of RSRQ Value in the range of -20 to -18 of Serving Cell
21 C373743505 Report Times of RSRQ Value in the range of -17 to -15 of Serving Cell
22 C373743506 Report Times of RSRQ Value in the range of -14 to -12 of Serving Cell
23 C373743507 Report Times of RSRQ Value in the range of -11 to -9 of Serving Cell
Counter Name
Maximum of RSRP Value of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the maximum of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is replaced with the current value when the current RSRP value is larger than
the prior at sampling point.
15-408
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
dBm
15.9.1.3.2 C373743401
Counter Name
Minimum of RSRP Value of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the minmium of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is replaced with the current value when the current RSRP value is smaller
than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
Event triggered
Unit
dBm
15-409
15.9.1.3.3 C373743402
Counter Name
Average of RSRP Value of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the average of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is updated by accumulating all the sample RSRP value, and then dividing the
sum by the measurement period.
Counter Type
Average value
Sampling Period
Event triggered
Unit
dBm
15.9.1.3.4 C373743405
Counter Name
Report Times of RSRP Value in the range of -140 to -121 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
15-410
cell in the message is collected. The counter records the number of the RSRP value
(-140 to -121).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -140 and -121
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -140 and -121
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.5 C373743406
Counter Name
Report Times of RSRP Value in the range of -120 to -116 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-120 to -116).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -120 and -116
Refer to Sampling Point 1.
15-411
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -120 and -116
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.6 C373743407
Counter Name
Report Times of RSRP Value in the range of -115 to -111 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-115 to -111).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -115 and -111
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -115 and -111
Counter Type
Accumulated value
15-412
Sampling Period
Event triggered
Unit
times
15.9.1.3.7 C373743408
Counter Name
Report Times of RSRP Value in the range of -110 to -106 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-110 to -106).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -110 and -106
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -110 and -106
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-413
15.9.1.3.8 C373743409
Counter Name
Report Times of RSRP Value in the range of -105 to -101 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-105 to -101).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -105 and -101
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -105 and -101
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.9 C373743410
Counter Name
Report Times of RSRP Value in the range of -100 to -96 of Serving Cell
Short Name
-
15-414
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-100 to -96).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -100 and -96
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -100 and -96
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.10 C373743411
Counter Name
Report Times of RSRP Value in the range of -95 to -91 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-95 to -91).
15-415
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -95 and -91
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -95 and -91.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.11 C373743412
Counter Name
Report Times of RSRP Value in the range of -90 to -86 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-90 to -86).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -90 and -86
Refer to Sampling Point 1.
15-416
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -90 and -86.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.12 C373743413
Counter Name
Report Times of RSRP Value in the range of -85 to -81 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-85 to -81).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -85 and -81
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -85 and -81.
Counter Type
Accumulated value
15-417
Sampling Period
Event triggered
Unit
times
15.9.1.3.13 C373743414
Counter Name
Report Times of RSRP Value in the range of -80 to -76 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-80 to -76).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -80 and -76
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -80 and -76.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-418
15.9.1.3.14 C373743415
Counter Name
Report Times of RSRP Value in the range of -75 to -71 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-75 to -71).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -75 and -71
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -75 and -71.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.15 C373743416
Counter Name
Report Times of RSRP Value in the range of -70 to -61 of Serving Cell
Short Name
-
15-419
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-70 to -61).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -70 and -61
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -70 and -61.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.16 C373743417
Counter Name
Report Times of RSRP Value in the range of -60 to -43 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRP value
(-60 to -43).
15-420
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of serving cell in the
message ranges between -60 and -43
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of serving
cell in the message ranges between -60 and -43.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.17 C373743500
Counter Name
Maximum of RSRQ Value of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the maximum of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is replaced with the current value when the current RSRQ value is larger than
the prior at sampling point.
15-421
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
dB
15.9.1.3.18 C373743501
Counter Name
Minimum of RSRQ Value of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the minmium of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is replaced with the current value when the current RSRQ value is smaller
than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
Event triggered
Unit
dB
15-422
15.9.1.3.19 C373743502
Counter Name
Average of RSRQ Value of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the average of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is updated by accumulating all the sample RSRQ value, and then dividing the
sum by the measurement period.
Counter Type
Average value
Sampling Period
Event triggered
Unit
dB
15.9.1.3.20 C373743504
Counter Name
Report Times of RSRQ Value in the range of -20 to -18 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
15-423
cell in the message is collected. The counter records the number of the RSRQ value
(-20 to -18).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of serving cell in the
message ranges between -20 and -18
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of serving
cell in the message ranges between -20 and -18.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.21 C373743505
Counter Name
Report Times of RSRQ Value in the range of -17 to -15 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRQ value
(-17 to -15).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of serving cell in the
message ranges between -17 and -15
Refer to Sampling Point 1.
15-424
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of serving
cell in the message ranges between -17 and -15.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.22 C373743506
Counter Name
Report Times of RSRQ Value in the range of -14 to -12 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRQ value
(-14 to -12).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of serving cell in the
message ranges between -14 and -12
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of serving
cell in the message ranges between -14 and -12.
Counter Type
Accumulated value
15-425
Sampling Period
Event triggered
Unit
times
15.9.1.3.23 C373743507
Counter Name
Report Times of RSRQ Value in the range of -11 to -9 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRQ value
(-11 to -9).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of serving cell in the
message ranges between -11 and -9
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of serving
cell in the message ranges between -11 and -9.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-426
15.9.1.3.24 C373743508
Counter Name
Report Times of RSRQ Value in the range of -8 to -6 of Serving Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRQ value (-8
to -6).
Triggering Point
When the eNodeB judges to triggerintra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of serving cell in the
message ranges between -8 and -6
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of serving
cell in the message ranges between -8 and -6.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.1.3.25 C373743509
Counter Name
Report Times of RSRQ Value in the range of -5 to -3 of Serving Cell
Short Name
-
15-427
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the serving
cell in the message is collected. The counter records the number of the RSRQ value (-5
to -3).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of serving cell in the
message ranges between -5 and -3
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of serving
cell in the message ranges between -5 and -3.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
4 C373743423 Report Times of RSRP Value in the range of -140 to -121 of Target Cell
15-428
5 C373743424 Report Times of RSRP Value in the range of -120 to -116 of Target Cell
6 C373743425 Report Times of RSRP Value in the range of -115 to -111 of Target Cell
7 C373743426 Report Times of RSRP Value in the range of -110 to -106 of Target Cell
8 C373743427 Report Times of RSRP Value in the range of -105 to -101 of Target Cell
9 C373743428 Report Times of RSRP Value in the range of -100 to -96 of Target Cell
10 C373743429 Report Times of RSRP Value in the range of -95 to -91 of Target Cell
11 C373743430 Report Times of RSRP Value in the range of -90 to -86 of Target Cell
12 C373743431 Report Times of RSRP Value in the range of -85 to -81 of Target Cell
13 C373743432 Report Times of RSRP Value in the range of -80 to -76 of Target Cell
14 C373743433 Report Times of RSRP Value in the range of -75 to -71 of Target Cell
15 C373743434 Report Times of RSRP Value in the range of -70 to -61 of Target Cell
16 C373743435 Report Times of RSRP Value in the range of -60 to -43 of Target Cell
20 C373743514 Report Times of RSRQ Value in the range of -20 to -18 of Target Cell
21 C373743515 Report Times of RSRQ Value in the range of -17 to -15 of Target Cell
22 C373743516 Report Times of RSRQ Value in the range of -14 to -12 of Target Cell
23 C373743517 Report Times of RSRQ Value in the range of -11 to -9 of Target Cell
15.9.2.3.1 C373743418
Counter Name
Maximum of RSRP Value of Target Cell
Short Name
-
15-429
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the maximum of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is replaced with the current value when the current RSRP value is larger than
the prior at sampling point.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
dBm
15.9.2.3.2 C373743419
Counter Name
Minimum of RSRP Value of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the minmium of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
15-430
Update Description
The counter is replaced with the current value when the current RSRP value is smaller
than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
Event triggered
Unit
dBm
15.9.2.3.3 C373743420
Counter Name
Average of RSRP Value of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the average of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is updated by accumulating all the sample RSRP value, and then dividing the
sum by the measurement period.
Counter Type
Average value
Sampling Period
Event triggered
15-431
Unit
dBm
15.9.2.3.4 C373743423
Counter Name
Report Times of RSRP Value in the range of -140 to -121 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-140 to -121).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -140 and -121
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -140 and -121.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.5 C373743424
Counter Name
Report Times of RSRP Value in the range of -120 to -116 of Target Cell
15-432
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-120 to -116).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -120 and -116
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -120 and -116.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.6 C373743425
Counter Name
Report Times of RSRP Value in the range of -115 to -111 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-115 to -111).
15-433
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -115 and -111
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -115 and -111.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.7 C373743426
Counter Name
Report Times of RSRP Value in the range of -110 to -106 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-110 to -106).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -110 and -106
Refer to Sampling Point 1.
15-434
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -110 and -106.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.8 C373743427
Counter Name
Report Times of RSRP Value in the range of -105 to -101 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-105 to -101).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -105 and -101
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -105 and -101.
Counter Type
Accumulated value
15-435
Sampling Period
Event triggered
Unit
times
15.9.2.3.9 C373743428
Counter Name
Report Times of RSRP Value in the range of -100 to -96 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-100 to -96).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -100 and -96
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -100 and -96.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-436
15.9.2.3.10 C373743429
Counter Name
Report Times of RSRP Value in the range of -95 to -91 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-95 to -91).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -95 and -91
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -95 and -91.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.11 C373743430
Counter Name
Report Times of RSRP Value in the range of -90 to -86 of Target Cell
Short Name
-
15-437
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-90 to -86).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -90 and -86
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -90 and -86.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.12 C373743431
Counter Name
Report Times of RSRP Value in the range of -85 to -81 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-85 to -81).
15-438
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -85 and -81
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -85 and -81.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.13 C373743432
Counter Name
Report Times of RSRP Value in the range of -80 to -76 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-80 to -76).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -80 and -76
Refer to Sampling Point 1.
15-439
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -80 and -76.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.14 C373743433
Counter Name
Report Times of RSRP Value in the range of -75 to -71 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-75 to -71).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -75 and -71
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -75 and -71.
Counter Type
Accumulated value
15-440
Sampling Period
Event triggered
Unit
times
15.9.2.3.15 C373743434
Counter Name
Report Times of RSRP Value in the range of -70 to -61 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-70 to -61).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -70 and -61
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -70 and -61.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-441
15.9.2.3.16 C373743435
Counter Name
Report Times of RSRP Value in the range of -60 to -43 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRP value
(-60 to -43).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRP value of neigbor cell in the
message ranges between -60 and -43
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRP value of neigbor
cell in the message ranges between -60 and -43.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.17 C373743510
Counter Name
Maximum of RSRQ Value of Target Cell
Short Name
-
15-442
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the maximum of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is replaced with the current value when the current RSRQ value is larger than
the prior at sampling point.
Counter Type
Maximum value
Sampling Period
Event triggered
Unit
dB
15.9.2.3.18 C373743511
Counter Name
Minimum of RSRQ Value of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the minmium of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
15-443
Update Description
The counter is replaced with the current value when the current RSRQ value is smaller
than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
Event triggered
Unit
dB
15.9.2.3.19 C373743512
Counter Name
Average of RSRQ Value of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the average of all collected value.
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE
Refer to Sampling Point 1.
Update Description
The counter is updated by accumulating all the sample RSRQ value(dbm), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
Event triggered
15-444
Unit
dB
15.9.2.3.20 C373743514
Counter Name
Report Times of RSRQ Value in the range of -20 to -18 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRQ value
(-20 to -18).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of neigbor cell in the
message ranges between -20 and -18
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of neigbor
cell in the message ranges between -20 and -18.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.21 C373743515
Counter Name
Report Times of RSRQ Value in the range of -17 to -15 of Target Cell
15-445
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRQ value
(-17 to -15).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of neigbor cell in the
message ranges between -17 and -15
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of neigbor
cell in the message ranges between -17 and -15.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.22 C373743516
Counter Name
Report Times of RSRQ Value in the range of -14 to -12 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRQ value
(-14 to -12).
15-446
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of neigbor cell in the
message ranges between -14 and -12
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of neigbor
cell in the message ranges between -14 and -12.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.23 C373743517
Counter Name
Report Times of RSRQ Value in the range of -11 to -9 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRQ value
(-11 to -9).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of neigbor cell in the
message ranges between -11 and -9
Refer to Sampling Point 1.
15-447
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of neigbor
cell in the message ranges between -11 and -9.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.9.2.3.24 C373743518
Counter Name
Report Times of RSRQ Value in the range of -8 to -6 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRQ value (-8
to -6).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of neigbor cell in the
message ranges between -8 and -6
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of neigbor
cell in the message ranges between -8 and -6.
Counter Type
Accumulated value
15-448
Sampling Period
Event triggered
Unit
times
15.9.2.3.25 C373743519
Counter Name
Report Times of RSRQ Value in the range of -5 to -3 of Target Cell
Short Name
-
Counter Description
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality of the neigbor
cell in the message is collected. The counter records the number of the RSRQ value (-5
to -3).
Triggering Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, and the RSRQ value of neigbor cell in the
message ranges between -5 and -3
Refer to Sampling Point 1.
Update Description
The counter is incremented by 1 when the eNodeB triggers intra-RAT handover after
receiving the MeasurementReport message from the UE, and the RSRQ value of neigbor
cell in the message ranges between -5 and -3.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-449
l Sampling Point 1: When the source eNodeB sends the HandoverRequest message
to target eNodeB.
l Sampling Point 2: When the source eNodeB receives the UEContextRelease mes-
sage to target eNodeB.
l Sampling Point 3: When the source eNodeB sends the HandoverRequired message
to target eNodeB.
l Sampling Point 4: When the source eNodeB receives the
UEContextReleaseCommand message to target eNodeB.
15-450
Counter Name
Sum Handover Camping Duration
Short Name
HO.CampDuration
Counter Description
This counter counts the number of intra-eNodeB, X2, S1, and inter-RAT handovers.
Triggering Point
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends the MME a Handover Required message or sends the
target eNodeB a Handover Request message, and this handover is triggered by energy
saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
15-451
15.10.3.2 C373485131
Counter Name
Number of Short Handover
Short Name
HO.ShortNum
Counter Description
The short handover indicates the handover whose resident time is excessively short, in
which the threshold configuration is available. This counter can be applied to measure the
condition of system "ping pang" handover.
Triggering Point
When a UE handover resident time is less than the configuration threshold
Refer to .
Update Description
The counter is incremented by 1 when a UE handover resident time is less than the
configuration threshold.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.10.3.3 C373485132
Counter Name
Number of UE Handover
Short Name
HO.TotalNum
15-452
Counter Description
Transmission at the cell in target eNB of UE CONTEXT RELEASE over the X2 to the
source eNodeB following a successful handover, or if handover is performed via S1,
Transmission of UE CONTEXT RELEASE COMMAND at the target eNodeB following a
successful handover.
Receipt at the source eNodeB of UE CONTEXT RELEASE over the X2 from the target
eNodeB following a successful handover, or if handover is performed via S1, receipt of UE
CONTEXT RELEASE COMMAND at the source eNodeB following a successful handover.
The measurent also includes intra-eNB handover.
Triggering Point
When a UE successfully enter into the target cell from source cell via handover and again
successfully get out the cell.
Refer to .
Update Description
The counter is incremented by 1 when a UE successfully enter into the target cell from
source cell via handover and again successfully get out the cell.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.10.3.4 C373546242
Counter Name
inter-RAT Handover Execute Sum Time(EPS->GERAN)
Short Name
-
Counter Description
This counter indicates the execution duration of inter-RAT 2G handovers.
15-453
Triggering Point
When the source eNodeB sends the MME an Handover Required message, handover
execution starts. When the source eNodeB receives an UEContextReleaseCommand
from the MME, handover execution ends. Handover execution duration refers to the
duration from the start time to the end time.
Refer to Sampling Point 3, Sampling Point 4.
Update Description
This counter is updated to the sum of inter-RAT 2G handover execution duration of all the
sampling points in a reporting period.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
15.10.3.5 C373546243
Counter Name
inter-RAT Handover Execute Sum Time(EPS->UTRAN)
Short Name
-
Counter Description
This counter indicates the execution duration of inter-RAT 3G handovers.
Triggering Point
When the source eNodeB sends the MME an Handover Required message, handover
execution starts. When the source eNodeB receives an UEContextReleaseCommand
from the MME, handover execution ends. Handover execution duration refers to the
duration from the start time to the end time.
Refer to Sampling Point 3, Sampling Point 4.
15-454
Update Description
This counter is updated to the sum of inter-RAT 3G handover execution duration of all the
sampling points in a reporting period.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
15.10.3.6 C373546244
Counter Name
intra-eNB Handover Execute Sum Time
Short Name
HO.Handovertime.IntraENB
Counter Description
The counter provides the sum time from the intra-eNB handover start to handover
complete.
Triggering Point
When eNodeB decides to initiate intra-eNodeB handover, record the start time; When
the eNodeB receives the RRCConnectionReconfigurationComplete message from the UE
during handover, record the end time. The intra-eNB handover time is the interval from
the start time to the end time.
Refer to .
Update Description
The counter is updated by taking the sum of intra-eNB handover time among sampling
points.
Counter Type
Accumulated value
15-455
Sampling Period
Event triggered
Unit
ms
15.10.3.7 C373546245
Counter Name
Handover Execute Sum Time Via X2
Short Name
HO.Handovertime.X2
Counter Description
The counter provides the sum time from the X2 handover start to handover complete.
Triggering Point
When the source eNodeB sends the HandoverRequest message to the target eNodeB,
record the start time; When the source eNodeB receives the UEContextRelease message
from the target eNodeB,record the end time. The X2 handover time is the interval from the
start time to the end time.
Refer to Sampling Point 1Sampling Point 2.
Update Description
The counter is updated by taking the sum of X2 handover time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
15.10.3.8 C373546246
Counter Name
Handover Execute Sum Time Via S1
15-456
Short Name
HO.Handovertime.S1
Counter Description
The counter provides the sum time from the S1 handover start to handover complete.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME, record the
start time; When the source eNodeB receives the UEContextReleaseCommand message
from the MME,record the end time. The S1 handover time is the interval from the start
time to the end time.
Refer to Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by taking the sum of S1 handover time among sampling points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
15.10.3.9 C373546247
Counter Name
inter-RAT Handover Execute Sum Time
Short Name
HO.Handovertime.InterRAT
Counter Description
The counter provides the sum time from the inter-RAT handover start to handover
complete.
Triggering Point
When the source eNodeB sends the HandoverRequired message to the MME, record the
start time; When the source eNodeB receives the UEContextReleaseCommand message
15-457
from the MME,record the end time. The inter-RAT handover time is the interval from the
start time to the end time.
Refer to Sampling Point 3, Sampling Point 4.
Update Description
The counter is updated by taking the sum of inter-RAT handover time among sampling
points.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
ms
15-458
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) Handover Preparation based on
Load Balance
15-459
Short Name
HO.L2UOutPrepSucc.Load Balance
Counter Description
The counter includes the S1 handover.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to handover preparation timeout.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to handover preparation timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.2 C373485160
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Preparation Failure based on
Load Balance
Short Name
HO.L2UOutPrepFail.Load Balance
Counter Description
The counter includes the S1 handover.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to reestablishment.
Refer to Sampling Point 1, Sampling Point 2.
15-460
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to reestablishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.3 C373485161
Counter Name
Number of Successful Outgoing inter-RAT(LTE->UTRAN) Handover Execution based on
Load Balance
Short Name
HO.L2UOutExecuSucc.Load Balance
Counter Description
The counter includes the S1 handoverr.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to user inactive.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to user inactive.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-461
Unit
times
15.11.3.4 C373485162
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Handover Execution Failure based on Load
Balance
Short Name
HO.L2UOutExecuFail.Load Balance
Counter Description
The counter includes the S1 handoverr.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to radio link failures.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to radio link failures.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.5 C373485163
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GERAN) Handover Preparation based
on Load Balance
15-462
Short Name
HO.L2GOutPrepSucc.Load Balance
Counter Description
The counter includes the S1 handoverr.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to other reason.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.6 C373485164
Counter Name
Number of Outgoing inter-RAT(LTE->GERAN) Handover Preparation Failure based on
Load Balance
Short Name
HO.L2GOutPrepFail.Load Balance
Counter Description
The counter includes the S1 handoverr.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to handover preparation timeout.
Refer to Sampling Point 1, Sampling Point 2.
15-463
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to handover preparation timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.7 C373485165
Counter Name
Number of Successful Outgoing inter-RAT(LTE->GERAN) Handover Execution based on
Load Balance
Short Name
HO.L2GOutExecuSucc.Load Balance
Counter Description
The counter includes the S1 handoverr.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to reestablishment.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to reestablishment.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-464
Unit
times
15.11.3.8 C373485166
Counter Name
Number of Outgoing inter-RAT(LTE->GERAN) Handover Execution Failure based on Load
Balance
Short Name
HO.L2GOutExecuFail.Load Balance
Counter Description
The counter includes the S1 handoverr.
Triggering Point
When the source eNodeB receives the HandoverCancelAcknowledge from the MME due
to user inactive.
Refer to Sampling Point 1, Sampling Point 2.
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverCancelAcknowledge from the MME due to user inactive.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.9 C373485169
Counter Name
Number of Outgoing Handover Preparation Failure
Short Name
-
15-465
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the source eNodeB receives the HandoverPreparationFailure from the MME or
target eNodeB, or receives RRCConnectionReestablishmentRequest from the UE, or
timeout, which indicates that the outgoing handover preparation is failure.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverPreparationFailure from the MME or target eNodeB, or receives
RRCConnectionReestablishmentRequest from the UE, or timeout, which indicates that
the outgoing handover preparation is failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.10 C373485170
Counter Name
Number of Outgoing Handover Preparation Failure due to HO Command Timeout
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the source eNodeB sends the HandoverCancel to the MME or target eNodeB due
to handover response timeout.
Refer to .
15-466
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverCancel to
the MME or target eNodeB due to handover response timeout.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.11 C373485171
Counter Name
Number of Outgoing Handover Preparation Failure due to Dest Preparation Failure
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the source eNodeB receives the HandoverPreparationFailure from the MME or
target eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB receives the
HandoverPreparationFailure from the MME or target eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-467
Unit
times
15.11.3.12 C373485172
Counter Name
Number of Outgoing Handover Preparation Failure due to Other Reason
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the source eNodeB sends the HandoverCancel to the MME or target eNodeB due
to other reason.
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverCancel to
the MME or target eNodeB due to other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.13 C373485173
Counter Name
Number of Incoming inter-eNB Handover Preparation Attemps
Short Name
-
15-468
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the target eNodeB receives the HandoverRequest from source eNodeB or the MME.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the HandoverRequest
from source eNodeB or the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.14 C373485174
Counter Name
Number of Successful Incoming inter-eNB Handover Preparation
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the target eNodeB sends the HandoverRequestAcknowledge to source eNodeB or
the MME.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the
HandoverRequestAcknowledge to source eNodeB or the MME.
15-469
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.15 C373485175
Counter Name
Number of Incoming inter-eNB Handover Preparation Failure
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the target eNodeB sends the HandoverPreparationFailure to source eNodeB or
HandoverFailure to the MME.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the
HandoverPreparationFailure to source eNodeB or HandoverFailure to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-470
15.11.3.16 C373485176
Counter Name
Number of Incoming inter-eNB Handover Preparation Failure due to Resource Allocation
Failure
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the target eNodeB sends the HandoverPreparationFailure to source eNodeB or
HandoverFailure to the MME due to admission failure.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB sends the
HandoverPreparationFailure to source eNodeB or HandoverFailure to the MME due to
admission failure.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.17 C373485177
Counter Name
Number of Incoming inter-eNB Handover Preparation Failure due to Source Cancel HO
Short Name
-
15-471
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the target eNodeB receives the HandoverCancel from source eNodeB or
UEContextRelease from the MME.
Refer to .
Update Description
The counter is incremented by 1 when the target eNodeB receives the HandoverCancel
from source eNodeB or UEContextRelease from the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.18 C373485178
Counter Name
Number of Incoming inter-eNB Handover Preparation Failure due to Other Reason
Short Name
-
Counter Description
The counter includes the S1 handover and X2 handover.
Triggering Point
When the target eNodeB sends the HandoverPreparationFailure to source eNodeB or
HandoverFailure to the MME due to other reason.
Refer to .
15-472
Update Description
The counter is incremented by 1 when the target eNodeB sends the
HandoverPreparationFailure to source eNodeB or HandoverFailure to the MME due to
other reason.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.19 C373485179
Counter Name
Number of Outgoing X2 Handover Cancels
Short Name
-
Counter Description
1 After the source eNodeB sends the HandoverRequest message to the target eNodeB,
the source eNodeB receives the RRCConnectionReestablishmentRequest message
or occurs the other failure(etc RLC error indication). Then the eNodeB sends the
HandoverCancel message to the target eNodeB.
2 After the source eNodeB sends the RRCConnectionReconfiguration
message to the UE during handover, the source eNodeB receives the
RRCConnectionReestablishmentRequest message. Then the eNodeB sends the
HandoverCancel message to the target eNodeB.
Triggering Point
When the source eNodeB sends the HandoverCancel message to the target eNodeB
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverCancel
message to the target eNodeB.
15-473
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.11.3.20 C373485180
Counter Name
Number of Outgoing S1 Handover Cancels
Short Name
-
Counter Description
1 After the source eNodeB sends the HandoverRequired message to the MME, the source
eNodeB receives the RRCConnectionReestablishmentRequest message or occurs the
other failure(etc RLC error indication). Then the eNodeB sends the HandoverCancel
message to the MME.
2 After the source eNodeB sends the RRCConnectionReconfiguration
message to the UE during handover, the source eNodeB receives the
RRCConnectionReestablishmentRequest message. Then the eNodeB sends the
HandoverCancel message to the MME.
Triggering Point
When the source eNodeB sends the HandoverCancel message to the MME
Refer to .
Update Description
The counter is incremented by 1 when the source eNodeB sends the HandoverCancel
message to the MME.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-474
Unit
times
Counter Name
Attempted Outgoing intra-frequency Handovers with DRX
Short Name
-
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, indicating the attempt of an outgoing handover when DRX is used.
15-475
Triggering Point
When the source eNodeB sends the RRCConnectionReconfigurationmessage to UE.
Refer to .
Update Description
The counter is incremented by 1 when the opening of "DRX" and the Frequency of source
cell and target cell are same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.12.3.2 C373485182
Counter Name
Successful Outgoing intra-frequency Handovers with DRX
Short Name
-
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE to
the target eNB, indicating a successful outgoing intra-eNB handover when DRX is used,
or receipt at the source eNB of UE CONTEXT RELEASE over the X2 from the target eNB
following a successful handover when DRX is used, or if handover is performed via S1,
receipt of UE CONTEXT RELEASE COMMAND at the source eNB following a successful
handover when DRX is used.
Triggering Point
1 When the source eNodeB receives the RRCConnectionReconfigurationComplete
message from UE in intra-eNB handover;
2 When the source eNodeB receives the UEContextRelease message from the target
eNodeB in inter-eNB X2 handover;
3 When the source eNodeB receives the UEContextReleaseCommand message from the
MME in inter-eNB S1 handover.
15-476
Refer to .
Update Description
The counter is incremented by 1 when the closing of "DRX" and the Frequency of source
cell and target cell are same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.12.3.3 C373485183
Counter Name
Attempted Outgoing intra-frequency Handovers Non-DRX
Short Name
-
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, indicating the attempt of an outgoing handover when DRX is not used
Triggering Point
When the source eNodeB sends the RRCConnectionReconfigurationmessage to UE.
Refer to .
Update Description
The counter is incremented by 1 when the closing of "DRX" and the Frequency of source
cell and target cell are same.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-477
Unit
times
15.12.3.4 C373485184
Counter Name
Successful Outgoing intra-frequency Handovers Non-DRX
Short Name
-
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target eNB, indicating a successful outgoing intra-eNB handover when DRX is not
used when DRX is not used, or receipt at the source eNB of UE CONTEXT RELEASE
over the X2 from the target eNB following a successful handover when DRX is not used,
or if handover is performed via S1, receipt of UE CONTEXT RELEASE COMMAND at the
source eNB following a successful handoverwhen DRX is not used.
Triggering Point
1 When the source eNodeB receives the RRCConnectionReconfigurationComplete
message from UE in intra-eNB handover;
2 When the source eNodeB receives the UEContextRelease message from the target
eNodeB in inter-eNB X2 handover;
3 When the source eNodeB receives the UEContextReleaseCommand message from the
MME in inter-eNB S1 handover.
Refer to .
Update Description
The counter is incremented by 1 when the opening of "DRX" and the Frequency of source
cell and target cell are same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-478
15.12.3.5 C373485185
Counter Name
Attempted Outgoing inter-frequency Handovers with DRX
Short Name
-
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, indicating the attempt of an outgoing handover when DRX is used.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfigurationmessage to UE.
Refer to .
Update Description
The counter is incremented by 1 when the opening of "DRX" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.12.3.6 C373485186
Counter Name
Successful Outgoing inter-frequency Handovers with DRX
Short Name
-
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE to
the target eNB, indicating a successful outgoing intra-eNB handover when DRX is used,
15-479
or receipt at the source eNB of UE CONTEXT RELEASE over the X2 from the target eNB
following a successful handover when DRX is used, or if handover is performed via S1,
receipt of UE CONTEXT RELEASE COMMAND at the source eNB following a successful
handover when DRX is used.
Triggering Point
1 When the source eNodeB receives the RRCConnectionReconfigurationComplete
message from UE in intra-eNB handover;
2 When the source eNodeB receives the UEContextRelease message from the target
eNodeB in inter-eNB X2 handover;
3 When the source eNodeB receives the UEContextReleaseCommand message from the
MME in inter-eNB S1 handover.
Refer to .
Update Description
The counter is incremented by 1 when the closing of "DRX" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.12.3.7 C373485187
Counter Name
Attempted Outgoing inter-frequency Handovers Non-DRX
Short Name
-
Counter Description
Transmission of the RRCConnectionReconfiguration message to UE triggering the
handover, indicating the attempt of an outgoing handover when DRX is not used
15-480
Triggering Point
When the source eNodeB sends the RRCConnectionReconfigurationmessage to UE.
Refer to .
Update Description
The counter is incremented by 1 when the closing of "DRX" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.12.3.8 C373485188
Counter Name
Successfu Outgoing inter-frequency Handovers Non-DRX
Short Name
-
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target eNB, indicating a successful outgoing intra-eNB handover when DRX is not
used when DRX is not used, or receipt at the source eNB of UE CONTEXT RELEASE
over the X2 from the target eNB following a successful handover when DRX is not used,
or if handover is performed via S1, receipt of UE CONTEXT RELEASE COMMAND at the
source eNB following a successful handoverwhen DRX is not used.
Triggering Point
1 When the source eNodeB receives the RRCConnectionReconfigurationComplete
message from UE in intra-eNB handover;
2 When the source eNodeB receives the UEContextRelease message from the target
eNodeB in inter-eNB X2 handover;
3 When the source eNodeB receives the UEContextReleaseCommand message from the
MME in inter-eNB S1 handover.
15-481
Refer to .
Update Description
The counter is incremented by 1 when the opening of "DRX" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-482
Counter Name
Attempted Outgoing inter-frequency Handovers Gap-assisted Measurement
Short Name
-
Counter Description
Transmission of the RRCConnectionReconfiguration message by the eNB to UE
triggering the handover, indicating the attempt of an outgoing inter-frequency handover
when measurement gaps are used.
Triggering Point
When the source eNodeB sends the RRCConnectionReconfigurationmessage to UE.
Refer to .
Update Description
The counter is incremented by 1 when the opening of "GAP" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.13.3.2 C373485190
Counter Name
Successful Outgoing inter-frequency Handovers Gap-assisted Measurement
Short Name
-
15-483
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE to
the target eNB, indicating a successful outgoing intra-eNB inter-frequency handover when
measurement gaps are used, or receipt at the source eNB of UE CONTEXT RELEASE
over the X2 from the target eNB or following a successful inter-frequency handover when
measurement gaps are used, or if handover is performed via S1, receipt of UE CONTEXT
RELEASE COMMAND at the source eNB following a successful inter-frequency handover
when measurement gaps are used.
Triggering Point
1 When the source eNodeB receives the RRCConnectionReconfigurationComplete
message from UE in intra-eNB handover;
2 When the source eNodeB receives the UEContextRelease message from the target
eNodeB in inter-eNB X2 handover;
3 When the source eNodeB receives the UEContextReleaseCommand message from the
MME in inter-eNB S1 handover.
Refer to .
Update Description
The counter is incremented by 1 when the closing of "GAP" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.13.3.3 C373485191
Counter Name
Attempted Outgoing inter-frequency Handovers Non Gap-assisted Measurement
Short Name
-
15-484
Counter Description
Transmission of the RRCConnectionReconfiguration message by the eNB to UE
triggering the handover, indicating the attempt of an outgoing inter-frequency handover
when measurement gaps are not used
Triggering Point
When the source eNodeB sends the RRCConnectionReconfigurationmessage to UE.
Refer to .
Update Description
The counter is incremented by 1 when the closing of "GAP" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.13.3.4 C373485192
Counter Name
Successful Outgoing inter-frequency Handovers Non Gap-assisted Measurement
Short Name
-
Counter Description
Receipt of a RRC message RRCConnectionReconfigurationComplete sent from the UE
to the target eNB, indicating a successful outgoing intra-eNB inter-frequency handover
when measurement gaps are not used, or receipt at the source eNB of UE CONTEXT
RELEASE over the X2 from the target eNB following a successful inter-frequency
handover when measurement gaps are not used, or if handover is performed via S1,
receipt of UE CONTEXT RELEASE COMMAND at the source eNB following a successful
inter-frequency handover when measurement gaps are not used.
15-485
Triggering Point
1 When the source eNodeB receives the RRCConnectionReconfigurationComplete
message from UE in intra-eNB handover;
2 When the source eNodeB receives the UEContextRelease message from the target
eNodeB in inter-eNB X2 handover;
3 When the source eNodeB receives the UEContextReleaseCommand message from the
MME in inter-eNB S1 handover.
Refer to .
Update Description
The counter is incremented by 1 when the opening of "GAP" and the Frequency of source
cell and target cell are not same.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-486
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Blind Handover Preparation Attemps
Short Name
-
Counter Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to UTRAN and
is a blind handover, this counter counts the number of handover requests from EUTRAN
to UTRAN.
Triggering Point
When the source eNodeB sends the MME a HandoverRequired message, this counter is
updated.
Refer to .
Update Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to UTRAN
and is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
15-487
Sampling Period
Event triggered
Unit
times
15.14.3.2 C373312802
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Blind Handover Execution
Short Name
-
Counter Description
When the source eNodeB receive a HandoverCommand message from the MME, and this
handover is a blind handover, this counter counts the number of outgoing handovers from
EUTRAN to UTRAN.
Triggering Point
When the source eNodeB receives a HandoverCommand message from the MME, this
counter is updated.
Refer to .
Update Description
When the source eNodeB receives a HandoverCommand message from the MME, and
this handover is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-488
15.14.3.3 C373312803
Counter Name
Number of Outgoing inter-RAT(LTE->UTRAN) Blind Handover Execution Success
Short Name
-
Counter Description
When the source eNodeB receive a UEContextRelease message from the MME, indicating
the handover is successfully executed, and this handover is a blind handover, this counter
counts the number of outgoing handovers from EUTRAN to UTRAN.
Triggering Point
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, and this handover is a blind handover,
this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.14.3.4 C373333401
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Blind Handover Preparation Attemps
Short Name
-
15-489
Counter Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to GSM and
is a blind handover, this counter counts the number of handover requests from EUTRAN
to GSM.
Triggering Point
When the source eNodeB sends the MME a HandoverRequired message, this counter is
updated.
Refer to .
Update Description
When the source eNodeB sends the MME a HandoverRequired message, if the Handover
Type IE indicates that the handover is an inter-RAT handover from EUTRAN to GSM and
is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.14.3.5 C373333402
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Blind Handover Execution
Short Name
-
Counter Description
When the source eNodeB receive a HandoverCommand message from the MME, and this
handover is a blind handover, this counter counts the number of outgoing handovers from
EUTRAN to GSM.
15-490
Triggering Point
When the source eNodeB receives a HandoverCommand message from the MME, this
counter is updated.
Refer to .
Update Description
When the source eNodeB receives a HandoverCommand message from the MME, and
this handover is a blind handover, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.14.3.6 C373333403
Counter Name
Number of Outgoing inter-RAT(LTE->GSM) Blind Handover Execution Success
Short Name
-
Counter Description
When the source eNodeB receive a UEContextRelease message from the MME, indicating
the handover is successfully executed, and this handover is a blind handover, this counter
counts the number of outgoing handovers from EUTRAN to GSM.
Triggering Point
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, this counter is updated.
Refer to .
Update Description
When the source eNodeB receives a UEContextRelease message from the MME,
indicating the handover is successfully executed, and this handover is a blind handover,
this counter is incremented by one.
15-491
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.14.3.7 C373485193
Counter Name
Number of Outgoing intra-RAT Blind Handover Preparation Attemps
Short Name
-
Counter Description
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is updated when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is updated.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is updated.
This counter calculates intra-system handovers only.
Triggering Point
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is updated when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is updated.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is updated.
15-492
Update Description
For a blind handover triggered by the eNodeB:
If the handover is an intra-eNodeB handover, no triggering message is defined, and this
counter is incremented by one when the eNodeB starts the handover.
If the handover is an X2 handover, when the source eNodeB sends the target eNodeB a
Handover Request message, this counter is incremented by one.
If the handover is an S1 handover, when the source eNodeB sends the MME a Handover
Required message, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.14.3.8 C373485194
Counter Name
Number of Outgoing intra-RAT Blind Handover Execution
Short Name
-
Counter Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, When the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
updated.
If the handover is an X2 handover, when the source eNodeB receives a
HandoverRequestAck message from the target eNodeB , this counter is updated.
If the handover is an S1 handover, when the source eNodeB receives a
HandoverCommand message from the MME, this counter is updated.
This counter calculates intra-system handovers only.
Triggering Point
For a blind handover executed by the eNodeB:
15-493
Update Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, When the eNodeB sends the UE an
RRCConnectionReconfiguration message with mobilityControlInfo, this counter is
incremented by one.
If the handover is an X2 handover, when the source eNodeB receives a
HandoverRequestAck message from the target eNodeB , this counter is incremented
by one.
If the handover is an S1 handover, when the source eNodeB receives a
HandoverCommand message from the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.14.3.9 C373485195
Counter Name
Number of Outgoing intra-RAT Blind Handover Execution Success
Short Name
-
15-494
Counter Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is updated.
If the handover is an X2 handover, when the source eNodeB receives a UEContextRelease
message from the target eNodeB , this counter is updated.
If the handover is an S1 handover, when the source eNodeB receives a UEContextRelease
message from the MME, this counter is updated.
This counter calculates intra-system handovers only.
Triggering Point
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is updated.
If the handover is an X2 handover, when the source eNodeB receives a UEContextRelease
message from the target eNodeB , this counter is updated.
If the handover is an S1 handover, when the source eNodeB receives a UEContextRelease
message from the MME, this counter is updated.
This counter calculates intra-system handovers only.
Refer to .
Update Description
For a blind handover executed by the eNodeB:
If the handover is an intra-eNodeB handover, when the eNodeB receives an
RRCConnectionReconfigurationComplete message from the UE, this counter is
incremented by one.
If the handover is an X2 handover, when the source eNodeB receives a UEContextRelease
message from the target eNodeB , this counter is incremented by one.
If the handover is an S1 handover, when the source eNodeB receives a UEContextRelease
message from the MME, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-495
15.15 RN
15.15.1 Flow Charts and Sampling Points
No chart.
15-496
15-497
15-498
100 C374017107 Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution Attemps(Trigged by Service Handovers)
101 C374017108 Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution Attemps(Based on Coverage Measurement)
102 C374017109 Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution Attemps(Trigged by Overload balance)
103 C374017110 Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution Attemps(Based on Mobile Speed)
104 C374017111 Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution Attemps(Based on Energy Saving)
105 C374017112 Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing
Handover Execution(Trigged by PCI Modify)
106 C374017113 Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing
Handover Execution(Trigged by Service Handovers)
107 C374017114 Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing
Handover Execution(Based on Coverage Measurement)
108 C374017115 Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing
Handover Execution(Trigged by Overload balance)
109 C374017116 Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing
Handover Execution(Based on Mobile Speed)
15-499
110 C374017117 Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing
Handover Execution(Based on Energy Saving)
Counter Name
Number of RN Reconfiguration Request
Short Name
RRC.RNReconAttNbr
Counter Description
This counter counts the number of RNReconfiguration messages sent from the eNodeB
to RNs.
Triggering Point
When the eNodeB sends an RNReconfiguration message to an RN, this counter is
updated.
Refer to .
Update Description
When the eNodeB sends an RNReconfiguration message to an RN, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-500
15.15.3.2 C373200133
Counter Name
Number of Successful RN Reconfiguration
Short Name
RRC.RNReconCmptNbr
Counter Description
This counter counts the number of RNReconfigurationComplete messages that the
eNodeB received from RNs.
Triggering Point
When the eNodeB receives an RNReconfigurationComplete message from an RN, this
counter is updated.
Refer to .
Update Description
When the eNodeB receives an RNReconfigurationComplete message from an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.3 C373353962
Counter Name
RN UL QCI1 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI1
15-501
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI1 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI1 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI1 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI1 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.4 C373353963
Counter Name
RN UL QCI2 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI2
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI2 PDCP packets
equals the received serial number minus the expected one.
15-502
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI2 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI2 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI2 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.5 C373353964
Counter Name
RN UL QCI3 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI3
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI3 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI3 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
15-503
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI3 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI3 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.6 C373353965
Counter Name
RN UL QCI4 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI4
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI4 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI4 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI4 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI4 PDCP
packets.
15-504
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.7 C373353966
Counter Name
RN UL QCI5 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI5
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI5 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI5 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI5 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI5 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
15-505
Unit
unit
15.15.3.8 C373353967
Counter Name
RN UL QCI6 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI6
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI6 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI6 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI6 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI6 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-506
15.15.3.9 C373353968
Counter Name
RN UL QCI7 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI7
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI7 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI7 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI7 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI7 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.10 C373353969
Counter Name
RN UL QCI8 PDCP SDU Loss Number
15-507
Short Name
DRB.RNPdcpSduLossUl.QCI8
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI8 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI8 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI8 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI8 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.11 C373353970
Counter Name
RN UL QCI9 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl.QCI9
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
15-508
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost QCI9 PDCP packets
equals the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink QCI9 PDCP SDUs
received from an RN, this counter is updated.
Refer to .
Update Description
When the eNodeB detects discontinuous serial numbers of uplink QCI9 PDCP SDUs
received from an RN, this counter is incremented by the number of lost QCI9 PDCP
packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.12 C373353971
Counter Name
RN DL QCI1 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI1
Counter Description
When the eNodeB discards a downlink QCI1 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI1 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
15-509
Refer to .
Update Description
When the eNodeB discards a downlink QCI1 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.13 C373353972
Counter Name
RN DL QCI2 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI2
Counter Description
When the eNodeB discards a downlink QCI2 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI2 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI2 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
15-510
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.14 C373353973
Counter Name
RN DL QCI3 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI3
Counter Description
When the eNodeB discards a downlink QCI3 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI3 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI3 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
15-511
Unit
unit
15.15.3.15 C373353974
Counter Name
RN DL QCI4 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI4
Counter Description
When the eNodeB discards a downlink QCI4 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI4 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI4 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-512
15.15.3.16 C373353975
Counter Name
RN DL QCI5 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI5
Counter Description
When the eNodeB discards a downlink QCI5 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI5 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI5 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.17 C373353976
Counter Name
RN DL QCI6 PDCP SDU Loss Number
15-513
Short Name
DRB.RNPdcpSduAirLossDl.QCI6
Counter Description
When the eNodeB discards a downlink QCI6 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI6 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI6 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.18 C373353977
Counter Name
RN DL QCI7 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI7
Counter Description
When the eNodeB discards a downlink QCI7 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
15-514
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI7 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI7 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.19 C373353978
Counter Name
RN DL QCI8 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI8
Counter Description
When the eNodeB discards a downlink QCI8 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI8 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
15-515
Refer to .
Update Description
When the eNodeB discards a downlink QCI8 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.20 C373353979
Counter Name
RN DL QCI9 PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl.QCI9
Counter Description
When the eNodeB discards a downlink QCI9 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and at least one fragment of this SDU has been transmitted on
the air interface without acknowledgements, this counter counts the number of discarded
SDUs.
Triggering Point
When the eNodeB discards a downlink QCI9 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI9 PDCP SDU of an RN, and some fragments or
all fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
15-516
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.21 C373353980
Counter Name
RN DL QCI1 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI1
Counter Description
When the eNodeB discards a downlink QCI1 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI1 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI1 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-517
15.15.3.22 C373353981
Counter Name
RN DL QCI2 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI2
Counter Description
When the eNodeB discards a downlink QCI2 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI2 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI2 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.23 C373353982
Counter Name
RN DL QCI3 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI3
15-518
Counter Description
When the eNodeB discards a downlink QCI3 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI3 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI3 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.24 C373353983
Counter Name
RN DL QCI4 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI4
Counter Description
When the eNodeB discards a downlink QCI4 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI4 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
15-519
Update Description
When the eNodeB discards a downlink QCI4 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.25 C373353984
Counter Name
RN DL QCI5 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI5
Counter Description
When the eNodeB discards a downlink QCI5 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI5 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI5 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
15-520
Unit
unit
15.15.3.26 C373353985
Counter Name
RN DL QCI6 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI6
Counter Description
When the eNodeB discards a downlink QCI6 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI6 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI6 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.27 C373353986
Counter Name
RN DL QCI7 PDCP SDU Discard Number
15-521
Short Name
DRB.RNPdcpSduAirDropDl.QCI7
Counter Description
When the eNodeB discards a downlink QCI7 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI7 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI7 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.28 C373353987
Counter Name
RN DL QCI8 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI8
Counter Description
When the eNodeB discards a downlink QCI8 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
15-522
Triggering Point
When the eNodeB discards a downlink QCI8 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI8 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.29 C373353988
Counter Name
RN DL QCI9 PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl.QCI9
Counter Description
When the eNodeB discards a downlink QCI9 PDCP SDU of an RN due to discard timer
expiry or buffer overflow, and no fragment of this SDU is transmitted on the air interface,
this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink QCI9 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink QCI9 PDCP SDU of an RN, and no fragment of
this SDU is transmitted on the air interface, this counter is incremented by one.
15-523
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.30 C373353989
Counter Name
RN UL QCI1 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI1
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI1 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI1 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI1 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-524
15.15.3.31 C373353990
Counter Name
RN UL QCI2 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI2
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI2 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI2 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI2 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.32 C373353991
Counter Name
RN UL QCI3 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI3
15-525
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI3 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI3 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI3 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.33 C373353992
Counter Name
RN UL QCI4 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI4
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI4 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI4 PDCP SDU of an RN, this
counter is updated.
Refer to .
15-526
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI4 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.34 C373353993
Counter Name
RN UL QCI5 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI5
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI5 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI5 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI5 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
15-527
Unit
unit
15.15.3.35 C373353994
Counter Name
RN UL QCI6 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI6
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI6 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI6 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI6 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.36 C373353995
Counter Name
RN UL QCI7 PDCP SDU Number
15-528
Short Name
DRB.RNPdcpSduUl.QCI7
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI7 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI7 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI7 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.37 C373353996
Counter Name
RN UL QCI8 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI8
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI8 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
15-529
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI8 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI8 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.38 C373353997
Counter Name
RN UL QCI9 PDCP SDU Number
Short Name
DRB.RNPdcpSduUl.QCI9
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a QCI9 PDCP packet
of an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink QCI9 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink QCI9 PDCP SDU of an RN, this
counter is incremented by one.
15-530
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.39 C373353998
Counter Name
RN DL QCI1 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI1
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-531
15.15.3.40 C373353999
Counter Name
RN DL QCI2 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI2
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI2 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI2 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI2 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.41 C373354000
Counter Name
RN DL QCI3 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI3
15-532
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI3 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI3 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI3 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.42 C373354001
Counter Name
RN DL QCI4 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI4
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI4 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI4 PDCP SDU of an RN, this
counter is updated.
Refer to .
15-533
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI4 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.43 C373354002
Counter Name
RN DL QCI5 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI5
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI5 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI5 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI5 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
15-534
Unit
unit
15.15.3.44 C373354003
Counter Name
RN DL QCI6 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI6
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI6 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI6 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI6 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.45 C373354004
Counter Name
RN DL QCI7 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI7
15-535
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI7 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI7 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI7 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.46 C373354005
Counter Name
RN DL QCI8 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI8
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI8 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI8 PDCP SDU of an RN, this
counter is updated.
Refer to .
15-536
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI8 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.47 C373354006
Counter Name
RN DL QCI9 PDCP SDU Number
Short Name
DRB.RNPdcpSduDl.QCI9
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI9 PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI9 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI9 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
15-537
Unit
unit
15.15.3.48 C373354007
Counter Name
RN DL QCI1 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI1
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI1 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI1 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI1 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.49 C373354008
Counter Name
RN DL QCI2 PDCP SDU Number Which HARQ Successfully Responds
15-538
Short Name
DRB.RNPdcpSduHarqDl.QCI2
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI2 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI2 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI2 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.50 C373354009
Counter Name
RN DL QCI3 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI3
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
15-539
all the TBs multiplexing the fragments of a downlink QCI3 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI3 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI3 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.51 C373354010
Counter Name
RN DL QCI4 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI4
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI4 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI4 PDCP SDU from the RN, this counter is updated.
Refer to .
15-540
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI4 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.52 C373354011
Counter Name
RN DL QCI5 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI5
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI5 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI5 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI5 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
15-541
Sampling Period
15 min
Unit
unit
15.15.3.53 C373354012
Counter Name
RN DL QCI6 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI6
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI6 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI6 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI6 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-542
15.15.3.54 C373354013
Counter Name
RN DL QCI7 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI7
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI7 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI7 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI7 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.55 C373354014
Counter Name
RN DL QCI8 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI8
15-543
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI8 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI8 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI8 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.56 C373354015
Counter Name
RN DL QCI9 PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl.QCI9
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to
all the TBs multiplexing the fragments of a downlink QCI9 PDCP SDU from the RN, this
counter counts the number of acknowledged SDUs.
15-544
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI9 PDCP SDU from the RN, this counter is updated.
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
QCI9 PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.57 C373354016
Counter Name
RN UL PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduLossUl
Counter Description
In an eNodeB, the PDCP layer receives packets of an RN from the RLC layer, and
compares the packet serial number with an expected one, which equals the serial number
of the last successfully-received packet plus one. If the received serial number is greater
than the expected one, uplink packets are lost. The number of lost PDCP packets equals
the received serial number minus the expected one.
Triggering Point
When the eNodeB detects discontinuous serial numbers of uplink PDCP SDUs received
from an RN, this counter is updated.
Refer to .
15-545
Update Description
When the eNodeB detects discontinuous serial numbers of uplink PDCP SDUs received
from an RN, this counter is incremented by the number of lost PDCP packets.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.58 C373354017
Counter Name
RN DL PDCP SDU Loss Number
Short Name
DRB.RNPdcpSduAirLossDl
Counter Description
When the eNodeB discards a downlink PDCP SDU of an RN due to discard timer expiry
or buffer overflow, and at least one fragment of this SDU has been transmitted on the air
interface without acknowledgements, this counter counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink PDCP SDU of an RN, and some fragments or all
fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink PDCP SDU of an RN, and some fragments or all
fragments of this SDU have been transmitted on the air interface without whole HARQ
acknowledgements, this counter is incremented by one.
Counter Type
Accumulated value
15-546
Sampling Period
15 min
Unit
unit
15.15.3.59 C373354018
Counter Name
RN DL PDCP SDU Discard Number
Short Name
DRB.RNPdcpSduAirDropDl
Counter Description
When the eNodeB discards a downlink PDCP SDU of an RN due to discard timer expiry or
buffer overflow, and no fragment of this SDU is transmitted on the air interface, this counter
counts the number of discarded SDUs.
Triggering Point
When the eNodeB discards a downlink PDCP SDU of an RN, and no fragment of this SDU
is transmitted on the air interface, this counter is updated.
Refer to .
Update Description
When the eNodeB discards a downlink PDCP SDU of an RN, and no fragment of this SDU
is transmitted on the air interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-547
15.15.3.60 C373354019
Counter Name
RN UL PDCP SDU Number
Short Name
DRB.RNPdcpSduUl
Counter Description
When the PDCP layer of the eNodeB, after receiving and processing a PDCP packet of
an RN, sends this SDU to the GTPU layer, this counter counts the number of SDUs sent
to the GTPU layer.
Triggering Point
When the PDCP layer of the eNodeB sends an uplink PDCP SDU of an RN, this counter
is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB sends an uplink PDCP SDU of an RN, this counter
is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.61 C373354020
Counter Name
RN DL PDCP SDU Number
Short Name
DRB.RNPdcpSduDl
15-548
Counter Description
When the PDCP layer of the eNodeB receives a downlink PDCP SDU of an RN, this
counter counts the number of received SDUs.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.62 C373354021
Counter Name
RN DL PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.RNPdcpSduHarqDl
Counter Description
An eNodeB PDCP SDU is fragmented, cascaded, and multiplexed into a TB, and then is
transmitted to RNs through the air interface. If an RN successfully receives a TB, it returns
a HARQ acknowledgement. When the eNodeB receives HARQ acknowledgements to all
the TBs multiplexing the fragments of a downlink PDCP SDU from the RN, this counter
counts the number of acknowledged SDUs.
Triggering Point
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
PDCP SDU from the RN, this counter is updated.
15-549
Refer to .
Update Description
When the eNodeB receives HARQ acknowledgements to all the fragments of a downlink
PDCP SDU from the RN, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.63 C373364120
Counter Name
RN DL QCI1 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI1
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
15-550
Sampling Period
15 min
Unit
ms
15.15.3.64 C373364121
Counter Name
RN DL QCI2 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI2
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI2 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI2 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI2 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.65 C373364122
Counter Name
RN DL QCI3 PDCP SDU Delay
15-551
Short Name
DRB.RNPdcpSduDelayDl.QCI3
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI3 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI3 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI3 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.66 C373364123
Counter Name
RN DL QCI4 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI4
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI4 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI4 PDCP SDU of an RN, this
counter is updated.
15-552
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI4 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.67 C373364124
Counter Name
RN DL QCI5 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI5
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI5 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI5 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI5 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
15-553
Sampling Period
15 min
Unit
ms
15.15.3.68 C373364125
Counter Name
RN DL QCI6 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI6
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI6 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI6 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI6 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.69 C373364126
Counter Name
RN DL QCI7 PDCP SDU Delay
15-554
Short Name
DRB.RNPdcpSduDelayDl.QCI7
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI7 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI7 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI7 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.70 C373364127
Counter Name
RN DL QCI8 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI8
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI8 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI8 PDCP SDU of an RN, this
counter is updated.
15-555
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI8 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.71 C373364128
Counter Name
RN DL QCI9 PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl.QCI9
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI9 PDCP SDU of an RN, this
counter counts the delay of downlink QCI1 PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink QCI9 PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink QCI9 PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
15-556
Sampling Period
15 min
Unit
ms
15.15.3.72 C373364129
Counter Name
RN DL PDCP SDU Delay
Short Name
DRB.RNPdcpSduDelayDl
Counter Description
When the PDCP layer of the eNodeB receives a downlink QCI1 PDCP SDU of an RN, this
counter counts the delay of downlink PDCP SDU.
Triggering Point
When the PDCP layer of the eNodeB receives a downlink PDCP SDU of an RN, this
counter is updated.
Refer to .
Update Description
When the PDCP layer of the eNodeB receives a downlink PDCP SDU of an RN, this
counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
15.15.3.73 C373596908
Counter Name
RN QCI1 PRB Number used for UL Traffic
15-557
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI1 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI1 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.74 C373596909
Counter Name
RN QCI2 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI2 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
15-558
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI2 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.75 C373596910
Counter Name
RN QCI3 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI3 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI3 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
15-559
Unit
unit
15.15.3.76 C373596911
Counter Name
RN QCI4 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI4 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI4 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.77 C373596912
Counter Name
RN QCI5 PRB Number used for UL Traffic
Short Name
-
15-560
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI5 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI5 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.78 C373596913
Counter Name
RN QCI6 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI6 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI6 DRB uplink service.
15-561
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.79 C373596914
Counter Name
RN QCI7 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI7 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI7 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-562
15.15.3.80 C373596915
Counter Name
RN QCI8 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI8 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI8 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.81 C373596916
Counter Name
RN QCI9 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules RN TBs, this counter counts the number of
PRBs occupied by uplink RN QCI9 DRB services.
15-563
Triggering Point
When the eNodeB uplink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules RN TBs, this counter is incremented by the
number of PRBs occupied by RN QCI9 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.82 C373596917
Counter Name
RN QCI1 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI1 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI1 DRB downlink service.
Counter Type
Accumulated value
15-564
Sampling Period
15 min
Unit
unit
15.15.3.83 C373596918
Counter Name
RN QCI2 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI2 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI2 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.84 C373596919
Counter Name
RN QCI3 PRB Number used for DL Traffic
15-565
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI3 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI3 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.85 C373596920
Counter Name
RN QCI4 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI4 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
15-566
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI4 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.86 C373596921
Counter Name
RN QCI5 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI5 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI5 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
15-567
Unit
unit
15.15.3.87 C373596922
Counter Name
RN QCI6 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI6 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI6 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.88 C373596923
Counter Name
RN QCI7 PRB Number used for DL Traffic
Short Name
-
15-568
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI7 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI7 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.89 C373596924
Counter Name
RN QCI8 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI8 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI8 DRB downlink service.
15-569
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.90 C373596925
Counter Name
RN QCI9 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules RN TBs, this counter counts the number
of PRBs occupied by downlink RN QCI9 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules RN TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules RN TBs, this counter is incremented by
the number of PRBs occupied by RN QCI9 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15-570
15.15.3.91 C373596926
Counter Name
RN PRB Number Used on Uplink Channel
Short Name
-
Counter Description
This counter counts the number of PRBs on the uplink channels actually allocated to
RNs by the eNodeB uplink scheduler. The uplink channels contain PRACH, PUCCH, and
PUSCH. The total number of PRBs in a sampling period is reported.
Triggering Point
When the eNodeB uplink scheduler has data to be scheduled and allocates PRBs for RNs,
this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler has data to be scheduled and allocates PRBs for RNs,
this counter is incremented by the number of allocated PRBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.92 C373596927
Counter Name
RN PRB Number Used on Downlink Channel
Short Name
-
15-571
Counter Description
This counter counts the number of PRBs on the uplink channels actually allocated to RNs
by the eNodeB uplink scheduler. The uplink channels contain PBCH and PDSCH. The
total number of PRBs in a sampling period is reported.
Triggering Point
When the eNodeB downlink scheduler has data to be scheduled and allocates PRBs for
RNs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler has data to be scheduled and allocates PRBs for RNs,
this counter is incremented by the number of allocated PRBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
15.15.3.93 C374017100
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Preparation
Attemps(Trigged by PCI Modify)
Short Name
HO.IntraDenbOutPrepToRnAtt.Cause
Counter Description
Triggered by PCI modification, the eNodeB sends a HandoverRequired message to an
RN. This counter counts the number of HandoverRequired messages triggered by PCI
modification of cells.
Triggering Point
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by PCI modification, this counter is updated.
15-572
Refer to .
Update Description
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by PCI modification, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.94 C374017101
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Preparation
Attemps(Trigged by Service Handovers)
Short Name
HO.IntraDenbOutPrepToRnAtt.Cause
Counter Description
Triggered by traffic strategy, the eNodeB sends a HandoverRequired message to an
RN. This counter counts the number of HandoverRequired messages triggered by traffic
strategy of cells.
Triggering Point
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by traffic strategy, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by traffic strategy, this counter is incremented by one.
Counter Type
Accumulated value
15-573
Sampling Period
Event triggered
Unit
times
15.15.3.95 C374017102
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Preparation
Attemps(Based on Coverage Measurement)
Short Name
HO.IntraDenbOutPrepToRnAtt.Cause
Counter Description
Triggered by coverage, the eNodeB sends a HandoverRequired message to an RN. This
counter counts the number of HandoverRequired messages triggered by coverage of cells.
Triggering Point
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by coverage, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by coverage, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-574
15.15.3.96 C374017103
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Preparation
Attemps(Trigged by Overload balance)
Short Name
HO.IntraDenbOutPrepToRnAtt.Cause
Counter Description
Triggered by load balancing, the eNodeB sends a HandoverRequired message to an
RN. This counter counts the number of HandoverRequired messages triggered by load
balancing of cells.
Triggering Point
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by load balancing, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by load balancing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.97 C374017104
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Preparation
Attemps(Based on Mobile Speed)
Short Name
HO.IntraDenbOutPrepToRnAtt.Cause
15-575
Counter Description
Triggered by move speed, the eNodeB sends a HandoverRequired message to an RN.
This counter counts the number of HandoverRequired messages triggered by move speed
of cells.
Triggering Point
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by move speed, this counter is updated.
Refer to .
Update Description
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by move speed, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.98 C374017105
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Preparation
Attemps(Based on Energy Saving)
Short Name
HO.IntraDenbOutPrepToRnAtt.Cause
Counter Description
Triggered by energy saving, the eNodeB sends a HandoverRequired message to an RN.
This counter counts the number of HandoverRequired messages triggered by energy
saving of cells.
Triggering Point
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by PCI energy saving, this counter is updated.
15-576
Refer to .
Update Description
When the source eNodeB sends a HandoverRequired message to an RN, and the
handover is triggered by PCI energy saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.99 C374017106
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Execution
Attemps(Trigged by PCI Modify)
Short Name
HO.IntraDenbOutToRnAtt.Cause
Counter Description
Triggered by PCI modification, the eNodeB receives a HandoverRequestAck message
indicating handover preparation success from an RN and sends the UE a handover
command. This counter counts the number of handovers triggered by PCI modification
of cells.
Triggering Point
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by PCI modification, this counter is updated.
Refer to .
Update Description
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by PCI modification, this counter is incremented by one.
15-577
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.100 C374017107
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Execution
Attemps(Trigged by Service Handovers)
Short Name
HO.IntraDenbOutToRnAtt.Cause
Counter Description
Triggered by traffic strategy, the eNodeB receives a HandoverRequestAck message
indicating handover preparation success from an RN and sends the UE a handover
command. This counter counts the number of handovers triggered by traffic strategy of
cells.
Triggering Point
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by traffic strategy, this counter is updated.
Refer to .
Update Description
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by traffic strategy, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-578
Unit
times
15.15.3.101 C374017108
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Execution
Attemps(Based on Coverage Measurement)
Short Name
HO.IntraDenbOutToRnAtt.Cause
Counter Description
Triggered by coverage, the eNodeB receives a HandoverRequestAck message indicating
handover preparation success from an RN and sends the UE a handover command. This
counter counts the number of handovers triggered by coverage of cells.
Triggering Point
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by coverage, this counter is updated.
Refer to .
Update Description
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by coverage, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-579
15.15.3.102 C374017109
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Execution
Attemps(Trigged by Overload balance)
Short Name
HO.IntraDenbOutToRnAtt.Cause
Counter Description
Triggered by load balancing, the eNodeB receives a HandoverRequestAck message
indicating handover preparation success from an RN and sends the UE a handover
command. This counter counts the number of handovers triggered by load balancing of
cells.
Triggering Point
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by load balancing, this counter is updated.
Refer to .
Update Description
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by load balancing, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.103 C374017110
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Execution
Attemps(Based on Mobile Speed)
15-580
Short Name
HO.IntraDenbOutToRnAtt.Cause
Counter Description
Triggered by move speed, the eNodeB receives a HandoverRequestAck message
indicating handover preparation success from an RN and sends the UE a handover
command. This counter counts the number of handovers triggered by move speed of
cells.
Triggering Point
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by move speed, this counter is updated.
Refer to .
Update Description
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by move speed, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.104 C374017111
Counter Name
Number of Intra-eNB From DeNB Cell to RN Cell Outgoing Handover Execution
Attemps(Based on Energy Saving)
Short Name
HO.IntraDenbOutToRnAtt.Cause
15-581
Counter Description
Triggered by energy saving, the eNodeB receives a HandoverRequestAck message
indicating handover preparation success from an RN and sends the UE a handover
command. This counter counts the number of handovers triggered by energy saving of
cells.
Triggering Point
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by energy saving, this counter is updated.
Refer to .
Update Description
When the eNodeB, after receiving a HandoverRequestAck message indicating handover
preparation success from an RN, sends the UE a handover command, and the handover
is triggered by energy saving, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.105 C374017112
Counter Name
Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution(Trigged by PCI Modify)
Short Name
HO.IntraDenbOutToRnSucc.Cause
Counter Description
For a handover from a DeNB to an RN is triggered by PCI modification, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the
UN interface, this counter counts the number of successful handovers triggered by PCI
modification of cells.
15-582
Triggering Point
For a handover from a DeNB to an RN triggered by PCI modification, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is updated.
Refer to .
Update Description
For a handover from a DeNB to an RN triggered by PCI modification, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.106 C374017113
Counter Name
Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution(Trigged by Service Handovers)
Short Name
HO.IntraDenbOutToRnSucc.Cause
Counter Description
For a handover from a DeNB to an RN is triggered by traffic strategy, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter counts the number of successful handovers triggered by traffic
strategy of cells.
Triggering Point
For a handover from a DeNB to an RN triggered by traffic strategy, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is updated.
Refer to .
15-583
Update Description
For a handover from a DeNB to an RN triggered by traffic strategy, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.107 C374017114
Counter Name
Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution(Based on Coverage Measurement)
Short Name
HO.IntraDenbOutToRnSucc.Cause
Counter Description
For a handover from a DeNB to an RN is triggered by coverage, when the eNodeB receives
a UEContextRelease message indicating handover success reasons on the UN interface,
this counter counts the number of successful handovers triggered by coverage of cells.
Triggering Point
For a handover from a DeNB to an RN triggered by coverage, when the eNodeB receives
a UEContextRelease message indicating handover success reasons on the UN interface,
this counter is updated.
Refer to .
Update Description
For a handover from a DeNB to an RN triggered by coverage, when the eNodeB receives
a UEContextRelease message indicating handover success reasons on the UN interface,
this counter is incremented by one.
15-584
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15.15.3.108 C374017115
Counter Name
Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution(Trigged by Overload balance)
Short Name
HO.IntraDenbOutToRnSucc.Cause
Counter Description
For a handover from a DeNB to an RN is triggered by load balancing, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the
UN interface, this counter counts the number of successful handovers triggered by load
balancing of cells.
Triggering Point
For a handover from a DeNB to an RN triggered by load balancing, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is updated.
Refer to .
Update Description
For a handover from a DeNB to an RN triggered by load balancing, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
15-585
Unit
times
15.15.3.109 C374017116
Counter Name
Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution(Based on Mobile Speed)
Short Name
HO.IntraDenbOutToRnSucc.Cause
Counter Description
For a handover from a DeNB to an RN is triggered by move speed, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter counts the number of successful handovers triggered by move
speed of cells.
Triggering Point
For a handover from a DeNB to an RN triggered by move speed, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is updated.
Refer to .
Update Description
For a handover from a DeNB to an RN triggered by move speed, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-586
15.15.3.110 C374017117
Counter Name
Number of Successful Intra-eNB From DeNB Cell to RN Cell Outgoing Handover
Execution(Based on Energy Saving)
Short Name
HO.IntraDenbOutToRnSucc.Cause
Counter Description
For a handover from a DeNB to an RN is triggered by energy saving, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter counts the number of successful handovers triggered by energy
saving of cells.
Triggering Point
For a handover from a DeNB to an RN triggered by energy saving, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is updated.
Refer to .
Update Description
For a handover from a DeNB to an RN triggered by energy saving, when the eNodeB
receives a UEContextRelease message indicating handover success reasons on the UN
interface, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
15-587
15-588
16-1
16-2
16.1.1.3.1 C373374200
Counter Name
Average Bitrate of PDCP SDU in The UL in Control Plane
Short Name
SRB.PdcpSduBitrateUl
Counter Description
At sampling time,the eNodeB collects the UL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME
Refer to .
Update Description
The counter is updated by accumulating all the sample UL SRB PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16-3
16.1.1.3.2 C373374201
Counter Name
Maximum Bitrate of PDCP SDU in The UL in Control Plane
Short Name
SRB.PdcpSduBitrateMaxUl
Counter Description
At sampling time,the eNodeB collects the UL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP SDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.3 C373374202
Counter Name
Average Bitrate of PDCP SDU in The DL in Control Plane
Short Name
SRB.PdcpSduBitrateDl
Counter Description
At sampling time,the eNodeB collects the DL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
16-4
Triggering Point
When the eNodeB receives the PDCP SDU of signal radio bear from the MME.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL SRB PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.4 C373374203
Counter Name
Maximum Bitrate of PDCP SDU in The DL in Control Plane
Short Name
SRB.PdcpSduBitrateMaxDl
Counter Description
At sampling time,the eNodeB collects the DL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the PDCP SDU of signal radio bear from the MME.
Refer to .
Update Description
The counter is replaced with the current value when the current DL SRB PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-5
Sampling Period
1s
Unit
Kbps
16.1.1.3.5 C373374204
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=1)
Short Name
DRB.PdcpSduBitrateUl.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.6 C373374205
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=2)
16-6
Short Name
DRB.PdcpSduBitrateUl.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI2 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.7 C373374206
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=3)
Short Name
DRB.PdcpSduBitrateUl.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
16-7
Triggering Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.8 C373374207
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=4)
Short Name
DRB.PdcpSduBitrateUl.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
16-8
Sampling Period
1s
Unit
Kbps
16.1.1.3.9 C373374208
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=5)
Short Name
DRB.PdcpSduBitrateUl.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.10 C373374209
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=6)
16-9
Short Name
DRB.PdcpSduBitrateUl.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI6 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.11 C373374210
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=7)
Short Name
DRB.PdcpSduBitrateUl.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
16-10
Triggering Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.12 C373374211
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=8)
Short Name
DRB.PdcpSduBitrateUl.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
16-11
Sampling Period
1s
Unit
Kbps
16.1.1.3.13 C373374212
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=9)
Short Name
DRB.PdcpSduBitrateUl.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.14 C373374213
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=1)
16-12
Short Name
DRB.PdcpSduBitrateDl.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI1 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.15 C373374214
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=2)
Short Name
DRB.PdcpSduBitrateDl.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
16-13
Triggering Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.16 C373374215
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=3)
Short Name
DRB.PdcpSduBitrateDl.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI3 PDCP SDU volume, and
then dividing the sum by the measurement period.
16-14
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.17 C373374216
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=4)
Short Name
DRB.PdcpSduBitrateDl.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16-15
16.1.1.3.18 C373374217
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=5)
Short Name
DRB.PdcpSduBitrateDl.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI5 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.19 C373374218
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=6)
Short Name
DRB.PdcpSduBitrateDl.QCI6
16-16
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.20 C373374219
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=7)
Short Name
DRB.PdcpSduBitrateDl.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the other eNodeB.
16-17
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI7 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.21 C373374220
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=8)
Short Name
DRB.PdcpSduBitrateDl.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
16-18
Sampling Period
1s
Unit
Kbps
16.1.1.3.22 C373374221
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=9)
Short Name
DRB.PdcpSduBitrateDl.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI9 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.23 C373374222
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=1)
16-19
Short Name
DRB.PdcpSduBitrateUlMax.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted.The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.24 C373374223
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=2)
Short Name
DRB.PdcpSduBitrateUlMax.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
16-20
Triggering Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.25 C373374224
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=3)
Short Name
DRB.PdcpSduBitrateUlMax.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-21
Sampling Period
1s
Unit
Kbps
16.1.1.3.26 C373374225
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=4)
Short Name
DRB.PdcpSduBitrateUlMax.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI4 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.27 C373374226
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=5)
16-22
Short Name
DRB.PdcpSduBitrateUlMax.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.28 C373374227
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=6)
Short Name
DRB.PdcpSduBitrateUlMax.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
16-23
Triggering Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.29 C373374228
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=7)
Short Name
DRB.PdcpSduBitrateUlMax.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-24
Sampling Period
1s
Unit
Kbps
16.1.1.3.30 C373374229
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=8)
Short Name
DRB.PdcpSduBitrateUlMax.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI8 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.31 C373374230
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=9)
16-25
Short Name
DRB.PdcpSduBitrateUlMax.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.32 C373374231
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=1)
Short Name
DRB.PdcpSduBitrateDlMax.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
16-26
Triggering Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.33 C373374232
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=2)
Short Name
DRB.PdcpSduBitrateDlMax.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-27
Sampling Period
1s
Unit
Kbps
16.1.1.3.34 C373374233
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=3)
Short Name
DRB.PdcpSduBitrateDlMax.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.35 C373374234
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=4)
16-28
Short Name
DRB.PdcpSduBitrateDlMax.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.36 C373374235
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=5)
Short Name
DRB.PdcpSduBitrateDlMax.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
16-29
Triggering Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.37 C373374236
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=6)
Short Name
DRB.PdcpSduBitrateDlMax.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-30
Sampling Period
1s
Unit
Kbps
16.1.1.3.38 C373374237
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=7)
Short Name
DRB.PdcpSduBitrateDlMax.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.39 C373374238
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=8)
16-31
Short Name
DRB.PdcpSduBitrateDlMax.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.40 C373374239
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=9)
Short Name
DRB.PdcpSduBitrateDlMax.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
16-32
Triggering Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.41 C373374240
Counter Name
Maximum Bitrate of PDCP SDU in The UL in Traffic Plane
Short Name
DRB.PdcpSduBitrateMaxUl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is sent by PDCP layer
from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP SDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
16-33
Sampling Period
1s
Unit
Kbps
16.1.1.3.42 C373374241
Counter Name
Maximum Bitrate of PDCP SDU in The DL in Traffic Plane
Short Name
DRB.PdcpSduBitrateMaxDl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is received by PDCP
layer in DL from the previous sampling time to the current sampling time. PDCP SDUs
that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL PDCP SDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.1.3.43 C373374242
Counter Name
Average Bitrate of PDCP SDU in The UL in Traffic Plane
16-34
Short Name
DRB.PdcpSduBitrateAvgUl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is sent by PDCP layer
from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL PDCP SDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.1.3.44 C373374243
Counter Name
Average Bitrate of PDCP SDU in The DL in Traffic Plane
Short Name
DRB.PdcpSduBitrateAvgDl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is received by PDCP
layer in DL from the previous sampling time to the current sampling time. PDCP SDUs that
are forwarded over the X2/S1 to another eNodeB during handover have been deducted.
The counter provides the average value of all sampling point in the measurement period.
16-35
Triggering Point
When the eNodeB receives the PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL PDCP SDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16-36
Counter Name
QCI1 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI1
Counter Description
accumulates shake of UL PDCP SDU(QCI=1) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI1 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI1 PDCP SDU at sampling point.
Counter Type
Accumulated value
16-37
Sampling Period
15 min
Unit
ms
16.1.2.3.2 C373536001
Counter Name
QCI2 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI2
Counter Description
accumulates shake of UL PDCP SDU(QCI=2) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI2 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI2 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.3 C373536002
Counter Name
QCI3 UL Total Packet Shake
16-38
Short Name
DRB.PdcpSduShakeUl.QCI3
Counter Description
accumulates shake of UL PDCP SDU(QCI=3) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI3 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI3 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.4 C373536003
Counter Name
QCI4 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI4
Counter Description
accumulates shake of UL PDCP SDU(QCI=4) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI4 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
16-39
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI4 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.5 C373536004
Counter Name
QCI5 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI5
Counter Description
accumulates shake of UL PDCP SDU(QCI=5) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI5 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI5 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
16-40
Unit
ms
16.1.2.3.6 C373536005
Counter Name
QCI6 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI6
Counter Description
accumulates shake of UL PDCP SDU(QCI=6) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI6 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI6 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.7 C373536006
Counter Name
QCI7 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI7
16-41
Counter Description
accumulates shake of UL PDCP SDU(QCI=7) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI7 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI7 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.8 C373536007
Counter Name
QCI8 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI8
Counter Description
accumulates shake of UL PDCP SDU(QCI=8) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI8 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
16-42
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI8 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.9 C373536008
Counter Name
QCI9 UL Total Packet Shake
Short Name
DRB.PdcpSduShakeUl.QCI9
Counter Description
accumulates shake of DL PDCP SDU(QCI=9) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI9 PDCP SDU to the SGW, get the UL delay of the SDU.
Then caculate the arithmetical difference between the SDU delay and the last SDU delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI9 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
16-43
Unit
ms
16.1.2.3.10 C373536009
Counter Name
QCI1 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI1
Counter Description
accumulates shake of DL PDCP SDU(QCI=1) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI1 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI1 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.11 C373536010
Counter Name
QCI2 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI2
16-44
Counter Description
accumulates shake of DL PDCP SDU(QCI=2) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI2 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI2 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.12 C373536011
Counter Name
QCI3 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI3
Counter Description
accumulates shake of DL PDCP SDU(QCI=3) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI3 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
16-45
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI3 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.13 C373536012
Counter Name
QCI4 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI4
Counter Description
accumulates shake of DL PDCP SDU(QCI=4) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI4 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI4 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
16-46
Unit
ms
16.1.2.3.14 C373536013
Counter Name
QCI5 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI5
Counter Description
accumulates shake of DL PDCP SDU(QCI=5) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI5 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI5 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.15 C373536014
Counter Name
QCI6 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI6
16-47
Counter Description
accumulates shake of DL PDCP SDU(QCI=6) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI6 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI6 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.16 C373536015
Counter Name
QCI7 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI7
Counter Description
accumulates shake of DL PDCP SDU(QCI=7) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI7 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
16-48
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI7 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.17 C373536016
Counter Name
QCI8 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI8
Counter Description
accumulates shake of DL PDCP SDU(QCI=8) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI8 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI8 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
16-49
Unit
ms
16.1.2.3.18 C373536017
Counter Name
QCI9 DL Total Packet Shake
Short Name
DRB.PdcpSduShakeDl.QCI9
Counter Description
accumulates shake of DL PDCP SDU(QCI=9) the SDU shake =
(|Pn-Pn-1|+|Pn-1-Pn-2|+...)
Triggering Point
When the eNodeB sends a QCI9 PDCP SDU to the air interface, get the DL delay of the
SDU. Then caculate the arithmetical difference between the SDU delay and the last SDU
delay.
Refer to .
Update Description
The counter is incremented by the difference when the eNodeB caculate arithmetical
difference for UL QCI9 PDCP SDU at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.2.3.19 C373536018
Counter Name
QCI1 DL PDCP SDU Number for Shake in Range 1
Short Name
-
16-50
Counter Description
This counter counts the number of PDCP SDU packets that the downlink QCI=1 delay jitter
is specified by range 1.Range 1: less than 10 ms.
Triggering Point
This counter counts the number of PDCP SDU packets that the downlink QCI1 delay jitter
is specified by range 1.
Refer to .
Update Description
This counter accumulates the number of PDCP SDU packets that the downlink QCI1 delay
jitter is specified by range 1 within a statistic period.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.1.2.3.20 C373536019
Counter Name
QCI1 DL PDCP SDU Number for Shake in Range 2
Short Name
-
Counter Description
This counter counts the number of PDCP SDU packets that the downlink QCI=1 delay jitter
is specified by range 2.Range 2: greater than 10 ms and less than 20 ms.
Triggering Point
This counter counts the number of PDCP SDU packets that the downlink QCI1 delay jitter
is specified by range 2.
Refer to .
16-51
Update Description
This counter accumulates the number of PDCP SDU packets that the downlink QCI1 delay
jitter is specified by range 2 within a statistic period.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.1.2.3.21 C373536020
Counter Name
QCI1 DL PDCP SDU Number for Shake in Range 3
Short Name
-
Counter Description
This counter counts the number of PDCP SDU packets that the downlink QCI=1 delay jitter
is specified by range 3.Range 3: greater than or equal to 20 ms.
Triggering Point
This counter counts the number of PDCP SDU packets that the downlink QCI1 delay jitter
is specified by range 3.
Refer to .
Update Description
This counter accumulates the number of PDCP SDU packets that the downlink QCI1 delay
jitter is specified by range 3 within a statistic period.
Counter Type
Accumulated value
Sampling Period
15 min
16-52
Unit
unit
16-53
16-54
Counter Name
Maximum Cell DL PDCP Throughput
Short Name
Drb.PdcpThrouDlMax
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's
and SRB's and is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
16-55
Triggering Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL PDCP PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.2 C373343601
Counter Name
Minimum Cell DL PDCP Throughput
Short Name
Drb.PdcpThrouDlMin
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's
and SRB's and is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL PDCP PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
16-56
Sampling Period
1s
Unit
Mbps
16.1.3.3.3 C373343602
Counter Name
Average Cell DL PDCP Throughput
Short Name
Drb.PdcpThrouDlAvg
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's
and SRB's and is sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL PDCP PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.4 C373343603
Counter Name
Maximum Cell UL PDCP Throughput
16-57
Short Name
Drb.PdcpThrouUlMax
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's and
SRB's and is received by PDCP layer from RLC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.5 C373343604
Counter Name
Minimum Cell UL PDCP Throughput
Short Name
Drb.PdcpThrouUlMin
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's and
SRB's and is received by PDCP layer from RLC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
16-58
Triggering Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.6 C373343605
Counter Name
Average Cell UL PDCP Throughput
Short Name
Drb.PdcpThrouUlAvg
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's and
SRB's and is received by PDCP layer from RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL PDCP PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
16-59
Sampling Period
1s
Unit
Mbps
16.1.3.3.7 C373343606
Counter Name
Maximum Cell DL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouDlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.8 C373343607
Counter Name
Minimum Cell DL PDCP Throughput(QCI=1)
16-60
Short Name
Drb.PdcpThrouDlMin.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.9 C373343608
Counter Name
Average Cell DL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouDlAvg.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB RLC layer
Refer to .
16-61
Update Description
The counter is updated by accumulating all the sample DL QCI1 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.10 C373343609
Counter Name
Maximum Cell UL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouUlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-62
Unit
Mbps
16.1.3.3.11 C373343610
Counter Name
Minimum Cell UL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouUlMin.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.12 C373343611
Counter Name
Average Cell UL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouUlAvg.QCI1
16-63
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.13 C373343612
Counter Name
Maximum Cell DL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouDlMax.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB RLC layer
Refer to .
16-64
Update Description
The counter is replaced with the current value when the current DL QCI2 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.14 C373343613
Counter Name
Minimum Cell DL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouDlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-65
Unit
Mbps
16.1.3.3.15 C373343614
Counter Name
Average Cell DL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouDlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.16 C373343615
Counter Name
Maximum Cell UL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouUlMax.QCI2
16-66
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.17 C373343616
Counter Name
Minimum Cell UL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouUlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the eNodeB RLC layer
Refer to .
16-67
Update Description
The counter is replaced with the current value when the current UL QCI2 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.18 C373343617
Counter Name
Average Cell UL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouUlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI2 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-68
Unit
Mbps
16.1.3.3.19 C373343618
Counter Name
Maximum Cell DL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouDlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.20 C373343619
Counter Name
Minimum Cell DL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouDlMin.QCI3
16-69
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.21 C373343620
Counter Name
Average Cell DL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouDlAvg.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB RLC layer
Refer to .
16-70
Update Description
The counter is updated by accumulating all the sample DL QCI3 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.22 C373343621
Counter Name
Maximum Cell UL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouUlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-71
Unit
Mbps
16.1.3.3.23 C373343622
Counter Name
Minimum Cell UL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouUlMin.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.24 C373343623
Counter Name
Average Cell UL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouUlAvg.QCI3
16-72
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.25 C373343624
Counter Name
Maximum Cell DL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouDlMax.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB RLC layer
Refer to .
16-73
Update Description
The counter is replaced with the current value when the current DL QCI4 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.26 C373343625
Counter Name
Minimum Cell DL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouDlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-74
Unit
Mbps
16.1.3.3.27 C373343626
Counter Name
Average Cell DL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouDlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.28 C373343627
Counter Name
Maximum Cell UL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouUlMax.QCI4
16-75
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI4 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.29 C373343628
Counter Name
Minimum Cell UL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouUlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the eNodeB RLC layer
Refer to .
16-76
Update Description
The counter is replaced with the current value when the current UL QCI4 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.30 C373343629
Counter Name
Average Cell UL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouUlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-77
Unit
Mbps
16.1.3.3.31 C373343630
Counter Name
Maximum Cell DL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouDlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.32 C373343631
Counter Name
Minimum Cell DL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouDlMin.QCI5
16-78
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.33 C373343632
Counter Name
Average Cell DL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouDlAvg.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB RLC layer
Refer to .
16-79
Update Description
The counter is updated by accumulating all the sample DL QCI5 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.34 C373343633
Counter Name
Maximum Cell UL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouUlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-80
Unit
Mbps
16.1.3.3.35 C373343634
Counter Name
Minimum Cell UL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouUlMin.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.36 C373343635
Counter Name
Average Cell UL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouUlAvg.QCI5
16-81
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.37 C373343636
Counter Name
Maximum Cell DL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouDlMax.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB RLC layer
Refer to .
16-82
Update Description
The counter is replaced with the current value when the current DL QCI6 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.38 C373343637
Counter Name
Minimum Cell DL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouDlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-83
Unit
Mbps
16.1.3.3.39 C373343638
Counter Name
Average Cell DL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouDlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.40 C373343639
Counter Name
Maximum Cell UL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouUlMax.QCI6
16-84
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.41 C373343640
Counter Name
Minimum Cell UL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouUlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the eNodeB RLC layer
Refer to .
16-85
Update Description
The counter is replaced with the current value when the current UL QCI6 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.42 C373343641
Counter Name
Average Cell UL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouUlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI6 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-86
Unit
Mbps
16.1.3.3.43 C373343642
Counter Name
Maximum Cell DL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouDlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.44 C373343643
Counter Name
Minimum Cell DL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouDlMin.QCI7
16-87
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.45 C373343644
Counter Name
Average Cell DL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouDlAvg.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB RLC layer
Refer to .
16-88
Update Description
The counter is updated by accumulating all the sample DL QCI7 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.46 C373343645
Counter Name
Maximum Cell UL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouUlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-89
Unit
Mbps
16.1.3.3.47 C373343646
Counter Name
Minimum Cell UL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouUlMin.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.48 C373343647
Counter Name
Average Cell UL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouUlAvg.QCI7
16-90
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.49 C373343648
Counter Name
Maximum Cell DL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouDlMax.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB RLC layer
Refer to .
16-91
Update Description
The counter is replaced with the current value when the current DL QCI8 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.50 C373343649
Counter Name
Minimum Cell DL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouDlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-92
Unit
Mbps
16.1.3.3.51 C373343650
Counter Name
Average Cell DL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouDlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.52 C373343651
Counter Name
Maximum Cell UL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouUlMax.QCI8
16-93
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI8 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.53 C373343652
Counter Name
Minimum Cell UL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouUlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the eNodeB RLC layer
Refer to .
16-94
Update Description
The counter is replaced with the current value when the current UL QCI8 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.54 C373343653
Counter Name
Average Cell UL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouUlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-95
Unit
Mbps
16.1.3.3.55 C373343654
Counter Name
Maximum Cell DL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouDlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.56 C373343655
Counter Name
Minimum Cell DL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouDlMin.QCI9
16-96
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.57 C373343656
Counter Name
Average Cell DL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouDlAvg.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB RLC layer
Refer to .
16-97
Update Description
The counter is updated by accumulating all the sample DL QCI9 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.3.3.58 C373343657
Counter Name
Maximum Cell UL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouUlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-98
Unit
Mbps
16.1.3.3.59 C373343658
Counter Name
Minimum Cell UL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouUlMin.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.3.3.60 C373343659
Counter Name
Average Cell UL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouUlAvg.QCI9
16-99
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16-100
16-101
16-102
16.1.4.3.1 C373343660
Counter Name
Maximum Cell DL RLC Throughput
Short Name
Drb.RlcThrouDlMax
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU. The counter provides
the maximum value in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer
Refer to .
16-103
Update Description
The counter is replaced with the current value when the current DL RLC PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.2 C373343661
Counter Name
Minimum Cell DL RLC Throughput
Short Name
Drb.RlcThrouDlMin
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU.The counter provides
the minimum value in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL RLC PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-104
Unit
Mbps
16.1.4.3.3 C373343662
Counter Name
Average Cell DL RLC Throughput
Short Name
Drb.RlcThrouDlAvg
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL RLC PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.4 C373343663
Counter Name
Maximum Cell UL RLC Throughput
Short Name
Drb.RlcThrouUlMax
16-105
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is received by RLC layer from MAC layer from the previous sampling time
to the current sampling time. The volume includes retransmission's PDU. The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL RLC PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.5 C373343664
Counter Name
Minimum Cell UL RLC Throughput
Short Name
Drb.RlcThrouUlMin
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is received by RLC layer from MAC layer from the previous sampling time
to the current sampling time. The volume includes retransmission's PDU. The counter
provides the minimum value in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC layer
Refer to .
16-106
Update Description
The counter is replaced with the current value when the current UL RLC PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.6 C373343665
Counter Name
Average Cell UL RLC Throughput
Short Name
Drb.RlcThrouUlAvg
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is received by RLC layer from MAC layer from the previous sampling time
to the current sampling time. The volume includes retransmission's PDU. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL RLC PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-107
Unit
Mbps
16.1.4.3.7 C373343666
Counter Name
Maximum Cell DL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouDlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that is sent by RLC
layer to MAC layer from the previous sampling time to the current sampling time.The
volume includes retransmission's PDU. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.8 C373343667
Counter Name
Minimum Cell DL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouDlMin.QCI1
16-108
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.9 C373343668
Counter Name
Average Cell DL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouDlAvg.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB MAC layer
Refer to .
16-109
Update Description
The counter is updated by accumulating all the sample DL QCI1 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.10 C373343669
Counter Name
Maximum Cell UL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouUlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-110
Unit
Mbps
16.1.4.3.11 C373343670
Counter Name
Minimum Cell UL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouUlMin.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.12 C373343671
Counter Name
Average Cell UL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouUlAvg.QCI1
16-111
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.13 C373343672
Counter Name
Maximum Cell DL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouDlMax.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB MAC layer
Refer to .
16-112
Update Description
The counter is replaced with the current value when the current DL QCI2 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.14 C373343673
Counter Name
Minimum Cell DL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouDlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-113
Unit
Mbps
16.1.4.3.15 C373343674
Counter Name
Average Cell DL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouDlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.16 C373343675
Counter Name
Maximum Cell UL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouUlMax.QCI2
16-114
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.17 C373343676
Counter Name
Minimum Cell UL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouUlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the eNodeB MAC layer
Refer to .
16-115
Update Description
The counter is replaced with the current value when the current UL QCI2 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.18 C373343677
Counter Name
Average Cell UL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouUlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI2 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-116
Unit
Mbps
16.1.4.3.19 C373343678
Counter Name
Maximum Cell DL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouDlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.20 C373343679
Counter Name
Minimum Cell DL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouDlMin.QCI3
16-117
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.21 C373343680
Counter Name
Average Cell DL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouDlAvg.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB MAC layer
Refer to .
16-118
Update Description
The counter is updated by accumulating all the sample DL QCI3 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.22 C373343681
Counter Name
Maximum Cell UL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouUlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-119
Unit
Mbps
16.1.4.3.23 C373343682
Counter Name
Minimum Cell UL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouUlMin.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.24 C373343683
Counter Name
Average Cell UL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouUlAvg.QCI3
16-120
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.25 C373343684
Counter Name
Maximum Cell DL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouDlMax.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB MAC layer
Refer to .
16-121
Update Description
The counter is replaced with the current value when the current DL QCI4 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.26 C373343685
Counter Name
Minimum Cell DL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouDlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-122
Unit
Mbps
16.1.4.3.27 C373343686
Counter Name
Average Cell DL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouDlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.28 C373343687
Counter Name
Maximum Cell UL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouUlMax.QCI4
16-123
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI4 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.29 C373343688
Counter Name
Minimum Cell UL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouUlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the eNodeB MAC layer
Refer to .
16-124
Update Description
The counter is replaced with the current value when the current UL QCI4 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.30 C373343689
Counter Name
Average Cell UL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouUlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-125
Unit
Mbps
16.1.4.3.31 C373343690
Counter Name
Maximum Cell DL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouDlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.32 C373343691
Counter Name
Minimum Cell DL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouDlMin.QCI5
16-126
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.33 C373343692
Counter Name
Average Cell DL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouDlAvg.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB MAC layer
Refer to .
16-127
Update Description
The counter is updated by accumulating all the sample DL QCI5 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.34 C373343693
Counter Name
Maximum Cell UL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouUlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-128
Unit
Mbps
16.1.4.3.35 C373343694
Counter Name
Minimum Cell UL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouUlMin.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.36 C373343695
Counter Name
Average Cell UL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouUlAvg.QCI5
16-129
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.37 C373343696
Counter Name
Maximum Cell DL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouDlMax.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB MAC layer
Refer to .
16-130
Update Description
The counter is replaced with the current value when the current DL QCI6 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.38 C373343697
Counter Name
Minimum Cell DL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouDlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-131
Unit
Mbps
16.1.4.3.39 C373343698
Counter Name
Average Cell DL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouDlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.40 C373343699
Counter Name
Maximum Cell UL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouUlMax.QCI6
16-132
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.41 C373343700
Counter Name
Minimum Cell UL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouUlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the eNodeB MAC layer
Refer to .
16-133
Update Description
The counter is replaced with the current value when the current UL QCI6 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.42 C373343701
Counter Name
Average Cell UL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouUlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI6 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-134
Unit
Mbps
16.1.4.3.43 C373343702
Counter Name
Maximum Cell DL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouDlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.44 C373343703
Counter Name
Minimum Cell DL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouDlMin.QCI7
16-135
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.45 C373343704
Counter Name
Average Cell DL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouDlAvg.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB MAC layer
Refer to .
16-136
Update Description
The counter is updated by accumulating all the sample DL QCI7 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.46 C373343705
Counter Name
Maximum Cell UL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouUlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-137
Unit
Mbps
16.1.4.3.47 C373343706
Counter Name
Minimum Cell UL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouUlMin.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.48 C373343707
Counter Name
Average Cell UL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouUlAvg.QCI7
16-138
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.49 C373343708
Counter Name
Maximum Cell DL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouDlMax.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB MAC layer
Refer to .
16-139
Update Description
The counter is replaced with the current value when the current DL QCI8 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.50 C373343709
Counter Name
Minimum Cell DL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouDlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-140
Unit
Mbps
16.1.4.3.51 C373343710
Counter Name
Average Cell DL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouDlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.52 C373343711
Counter Name
Maximum Cell UL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouUlMax.QCI8
16-141
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI8 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.53 C373343712
Counter Name
Minimum Cell UL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouUlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the eNodeB MAC layer
Refer to .
16-142
Update Description
The counter is replaced with the current value when the current UL QCI8 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.54 C373343713
Counter Name
Average Cell UL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouUlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-143
Unit
Mbps
16.1.4.3.55 C373343714
Counter Name
Maximum Cell DL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouDlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.56 C373343715
Counter Name
Minimum Cell DL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouDlMin.QCI9
16-144
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.57 C373343716
Counter Name
Average Cell DL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouDlAvg.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time.The volume includes retransmission's PDU. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB MAC layer
Refer to .
16-145
Update Description
The counter is updated by accumulating all the sample DL QCI9 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.1.4.3.58 C373343717
Counter Name
Maximum Cell UL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouUlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-146
Unit
Mbps
16.1.4.3.59 C373343718
Counter Name
Minimum Cell UL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouUlMin.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.1.4.3.60 C373343719
Counter Name
Average Cell UL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouUlAvg.QCI9
16-147
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16-148
16.1.5.3.1 C373343732
Counter Name
Maximum Cell DL PHY Throughput
Short Name
Drb.PhyThrouDlMax
Counter Description
Downlink PHY Traffic on the Sampling Point = the size of TBs. The counter takes the
maximum value of all sampling granularities in the statistical period.
Triggering Point
When the eNodeB physical layer sends data to the air
Refer to .
Update Description
The counter is updated to the sampling value if it is higher than
the current one.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16-149
16.1.5.3.2 C373343733
Counter Name
Minimum Cell DL PHY Throughput
Short Name
Drb.PhyThrouDlMin
Counter Description
Downlink PHY Traffic on the Sampling Point = the size of TBs. That includes
retransmission TBs. The counter takes the minimum value of all sampling granularities
in the statistical period.
Triggering Point
When the eNodeB physical layer sends data to the air
Refer to .
Update Description
The counter is updated to the sampling value if it is lower than
the current one.
Counter Type
Minimum value
Sampling Period
1s
Unit
Kbps
16.1.5.3.3 C373343734
Counter Name
Average Cell DL PHY Throughput
Short Name
Drb.PhyThrouDlAvg
16-150
Counter Description
Downlink PHY Traffic on the Sampling Point = the size of TBs.That includes retransmission
TBs.The counter takes the average value of all sampling granularities in the statistical
period.
Triggering Point
When the eNodeB physical layer sends data to the air
Refer to .
Update Description
The counter is updated by accumulating all the sampling physical layer volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.5.3.4 C373343735
Counter Name
Maximum Cell UL PHY Throughput
Short Name
Drb.PhyThrouUlMax
Counter Description
Uplink PHY Traffic on the Sampling Point = the size of TBs.That includes retransmission
TBs.The counter takes the maximum value of all sampling granularities in the statistical
period.
Triggering Point
When the eNodeB physical layer receives data from the air
Refer to .
Update Description
The counter is updated to the sampling value if it is larger than the current one.
16-151
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.5.3.5 C373343736
Counter Name
Minimum Cell UL PHY Throughput
Short Name
Drb.PhyThrouUlMin
Counter Description
Uplink PHY Traffic on the Sampling Point = the size of TBs. That includes retransmission
TBs.The counter takes the minimum value of all sampling granularities in the statistical
period.
Triggering Point
When the eNodeB physical layer receives data from the air
Refer to .
Update Description
The counter is updated to the sampling value if it is lower than the current one.
Counter Type
Minimum value
Sampling Period
1s
Unit
Kbps
16.1.5.3.6 C373343737
Counter Name
Average Cell UL PHY Throughput
16-152
Short Name
Drb.PhyThrouUlAvg
Counter Description
Uplink PHY traffic on the sampling point = the size of TBs. That includes retransmission
TBs.The counter takes the average value of all sampling granularities in the statistical
period.
Triggering Point
When the eNodeB physical layer receives data from the air
Refer to .
Update Description
The counter is updated by accumulating all the sampling physical layer volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.5.3.7 C373343792
Counter Name
Maximum Cell DL PHY Throughput within The Threshold
Short Name
Drb.PhyThreThrouDlMax
Counter Description
Downlink PHY Traffic on the Sampling Point = the size of TBs. when threshold for RSRP
and SINR Statistics is satisfied. The counter takes the maximum value of all sampling
granularities in the statistical period.
16-153
Triggering Point
When there are downlink data to be sent on the PHY,and the threshold requirements for
RSRP and SINR must be satisfied.These threshold values can be set in OMC windows,
and the default threshold requirements are: RSRP > Threshold for RSRP
Statistics and SINR > Threshold for DL SINR Statistics.
Refer to .
Update Description
The counter is updated to the sampling value if it is larger than the current one.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.1.5.3.8 C373343793
Counter Name
Average Cell DL PHY Throughput within The Threshold
Short Name
Drb.PhyThreThrouDlAvg
Counter Description
The average cell DL physical throughput is calculated by summing up transport block size
in sampling period, and the transport block is within threshold, but exclude retransmission
transport block.Users can set these threshold values, and the default threshold
requirements are: RSRP > Threshold for RSRP Statistics and DL SINR > Threshold for
DL SINR Statistics.The RSRP threshold is converted by Power Headroom reporting that
UE reports by means of period or event trigger.The DL SINR threshold is converted by
CQI reported by UE.
Triggering Point
When there are downlink data to be sent on the PHY channelfrom the MAC layer, and the
threshold requirements for RSRP and DL SINR must be satisfied.
Refer to .
16-154
Update Description
The counter is updated per statistical period by calculating the average.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.1.5.3.9 C373343794
Counter Name
Maximum Cell UL PHY Throughput within The Threshold
Short Name
Drb.PhyThreThrouUlMax
Counter Description
Uplink PHY Traffic on the Sampling Point = the size of TBs.when threshold for RSRP
and SINR Statistics is satisfied. The counter takes the maximum value of all sampling
granularities in the statistical period.
Triggering Point
When the uplink PHY receives the data, and the threshold requirements for RSRP and
SINR must be satisfied. Users can set these threshold values, and the default threshold
requirements are: RSRP > Threshold for RSRP Statistics and SINR > Threshold for DL
SINR Statistics.
Refer to .
Update Description
The counter is updated to the sampling value if it is larger than the current one.
Counter Type
Maximum value
Sampling Period
1s
16-155
Unit
Kbps
16.1.5.3.10 C373343795
Counter Name
Average Cell UL PHY Throughput within The Threshold
Short Name
Drb.PhyThreThrouUlAvg
Counter Description
The average cell DL physical throughput is calculated by summing up transport block size
in sampling period, and the transport block is within threshold, but exclude retransmission
transport block. Users can set these threshold values, and the default threshold
requirements are: RSRP > Threshold for RSRP Statistics and DL SINR > Threshold for
DL SINR Statistics. The RSRP threshold is converted by Power Headroom reporting that
UE reports by means of period or event trigger.The DL SINR threshold is converted by
CQI reported by UE.
Triggering Point
When the uplink PHY receives the data, and the threshold
requirements for RSRP and DL SINR must be satisfied.
Refer to .
Update Description
The counter is updated per statistical period by calculating the average.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16-156
Counter Name
Cell DL Aggregated Volume High
Short Name
Drb.MacVolumDlHigh
Counter Description
The counter provides the part of TBs transmitted by eNodeB to UE on the downlink.The
total TBs = Cell DL Aggregated Volume High + Cell DL Aggregated Volume Low.When
the eNodeB get the successful DL TB HARQ feedback,the counter is collected. That is
excluded the retransmission TBs.
Triggering Point
When the eNodeB downlink scheduler get positively acknowledged for the transmitted
transport block over the air
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB downlink scheduler get
positively acknowledged for the transmitted transport block over the air
16-157
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.6.3.2 C373343727
Counter Name
Cell DL Aggregated Volume Low
Short Name
Drb.MacVolumDlLow
Counter Description
The counter provides the other part of TBs transmitted by eNodeB to UE on the
downlink.The total TBs = Cell DL Aggregated Volume High + Cell DL Aggregated Volume
Low.When the eNodeB get the successful DL TB HARQ feedback,the counter is collected.
That is excluded the retransmission TBs.
Triggering Point
When the eNodeB downlink scheduler get positively acknowledged for the transmitted
transport block over the air
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB downlink scheduler get
positively acknowledged for the transmitted transport block over the air
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16-158
16.1.6.3.3 C373343728
Counter Name
Cell UL Aggregated Volume High
Short Name
Drb.MacVolumUlHigh
Counter Description
The counter provides the part of TBs transmitted by UE to eNodeB on the uplink.The
total TBs = Cell UL Aggregated Volume High + Cell UL Aggregated Volume Low.When
the eNodeB get the successful UL TB HARQ feedback,the counter is collected. That is
excluded the retransmission TBs.
Triggering Point
When the eNodeB uplink scheduler get positively acknowledged for the transmitted
transport block by UE.
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB uplink scheduler get positively
acknowledged for the transmitted transport block by UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.6.3.4 C373343729
Counter Name
Cell UL Aggregated Volume Low
Short Name
Drb.MacVolumUlLow
16-159
Counter Description
The counter provides the other part of TBs transmitted by UE to eNodeB on the uplink.The
total TBs = Cell UL Aggregated Volume High + Cell UL Aggregated Volume Low.When
the eNodeB get the successful UL TB HARQ feedback,the counter is collected. That is
excluded the retransmission TBs.
Triggering Point
When the eNodeB uplink scheduler get positively acknowledged for the transmitted
transport block by UE.
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB uplink scheduler get positively
acknowledged for the transmitted transport block by UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.6.3.5 C373343730
Counter Name
Cell DL Aggregated Time
Short Name
Drb.MacTimeDl
Counter Description
The counter provides the DL TTI which has data scheduling.When the eNodeB downlink
scheduler schedule the transport block, one TTI is added to the counter including the TTI
of retransmission TB.
Triggering Point
When the eNodeB downlink scheduler schedule the transport block.
Refer to .
16-160
Update Description
The counter is increased by 1 when the eNodeB downlink scheduler schedule the transport
block.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.6.3.6 C373343731
Counter Name
Cell UL Aggregated Time
Short Name
Drb.MacTimeUl
Counter Description
The counter provides the UL TTI which has data scheduling.When the eNodeB uplink
scheduler schedule the transport block, one TTI is added to the counter including the TTI
of retransmission TB.
Triggering Point
When the eNodeB uplink scheduler schedule the transport block.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB uplink scheduler schedule the transport
block.
Counter Type
Accumulated value
Sampling Period
15 min
16-161
Unit
ms
16.1.6.3.7 C373343800
Counter Name
Nack Data Volume High Bit of UL TB Block
Short Name
-
Counter Description
The counter provides the part of TBs transmitted by UE to eNodeB on the uplink.The total
TBs = Cell UL Volume High + Cell UL Volume Low.When the eNodeB get the UL TB HARQ
feedback failures,the counter is collected. That is excluded the retransmission TBs.
Triggering Point
When the eNodeB uplink scheduler get negative acknowledged for the transmitted
transport block by UE.
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB uplink scheduler get negative
acknowledged for the transmitted transport block by UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.6.3.8 C373343801
Counter Name
Nack Data Volume Low Bit of UL TB Block
Short Name
-
16-162
Counter Description
The counter provides the other part of TBs transmitted by UE to eNodeB on the uplink.The
total TBs = Cell UL Volume High + Cell UL Volume Low.When the eNodeB get the UL TB
HARQ feedback failures,the counter is collected. That is excluded the retransmission TBs.
Triggering Point
When the eNodeB uplink scheduler get negative acknowledged for the transmitted
transport block by UE.
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB uplink scheduler get negative
acknowledged for the transmitted transport block by UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.6.3.9 C373343802
Counter Name
Nack Data Volume High Bit of DL TB Block
Short Name
-
Counter Description
The counter provides the part of TBs transmitted by eNodeB to UE on the downlink.The
total TBs = Cell DL Volume High + Cell DL Volume Low.When the eNodeB get the DL TB
HARQ feedback failures,the counter is collected. That is excluded the retransmission TBs.
Triggering Point
When the eNodeB downlink scheduler get negative acknowledged for the transmitted
transport block over the air
Refer to .
16-163
Update Description
The counter is increased by the size of TB when the eNodeB downlink scheduler get
negative acknowledged for the transmitted transport block over the air
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.6.3.10 C373343803
Counter Name
Nack Data Volume Low Bit of DL TB Block
Short Name
-
Counter Description
The counter provides the other part of TBs transmitted by eNodeB to UE on the
downlink.The total TBs = Cell DL Volume High + Cell DL Volume Low.When the eNodeB
get the DL TB HARQ feedback failures,the counter is collected. That is excluded the
retransmission TBs.
Triggering Point
When the eNodeB downlink scheduler get negative acknowledged for the transmitted
transport block over the air
Refer to .
Update Description
The counter is increased by the size of TB when the eNodeB downlink scheduler get
negative acknowledged for the transmitted transport block over the air
Counter Type
Accumulated value
Sampling Period
15 min
16-164
Unit
Mbit
16.1.7 IP Throughput
16.1.7.1 Flow Charts and Sampling Points
Throughput of PDCP SDU bits in downlink for packet sizes or data bursts that are large
enough to require transmissions to be split across several TTIs, by excluding transmission
of the last piece of data in a data burst. Only data transmission time is considered, i.e.
when data transmission over Uu has begun but not yet finished. Each measurement is a
real value representing the throughput in kbits/s. The measurement is performed per QCI
per UE. For successful reception, the reference point is MAC upper SAP.
16-165
16-166
16.1.7.3.1 C373343738
Counter Name
DL Aggregated Volume High through Uu,QCI=1
Short Name
Drb.IpThrouDlVoH.QCI1
Counter Description
The counter provides the part volume of QCI1 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
16-167
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.2 C373343739
Counter Name
DL Aggregated Volume Low through Uu,QCI=1
Short Name
Drb.IpThrouDlVoL.QCI1
Counter Description
The counter provides the other part volume of QCI1 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16-168
16.1.7.3.3 C373343740
Counter Name
DL Aggregated Time,QCI=1
Short Name
Drb.IpThrouDlTime.QCI1
Counter Description
The eNodeB collects the time of QCI1 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI1 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
The counter is incremented by the time of QCI1 PDCP SDU collected at sampling time.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.4 C373343741
Counter Name
DL Aggregated Volume High through Uu,QCI=2
Short Name
Drb.IpThrouDlVoH.QCI2
Counter Description
The counter provides the part volume of QCI2 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
16-169
Triggering Point
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.5 C373343742
Counter Name
DL Aggregated Volume Low through Uu,QCI=2
Short Name
Drb.IpThrouDlVoL.QCI2
Counter Description
The counter provides the other part volume of QCI2 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
16-170
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.6 C373343743
Counter Name
DL Aggregated Time,QCI=2
Short Name
Drb.IpThrouDlTime.QCI2
Counter Description
The eNodeB collects the time of QCI2 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.7 C373343744
Counter Name
DL Aggregated Volume High through Uu,QCI=3
16-171
Short Name
Drb.IpThrouDlVoH.QCI3
Counter Description
The counter provides the part volume of QCI3 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.8 C373343745
Counter Name
DL Aggregated Volume Low through Uu,QCI=3
Short Name
Drb.IpThrouDlVoL.QCI3
Counter Description
The counter provides the other part volume of QCI3 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
16-172
Triggering Point
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.9 C373343746
Counter Name
DL Aggregated Time,QCI=3
Short Name
Drb.IpThrouDlTime.QCI3
Counter Description
The eNodeB collects the time of QCI3 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
16-173
Sampling Period
15 min
Unit
ms
16.1.7.3.10 C373343747
Counter Name
DL Aggregated Volume High through Uu,QCI=4
Short Name
Drb.IpThrouDlVoH.QCI4
Counter Description
The counter provides the part volume of QCI4 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.11 C373343748
Counter Name
DL Aggregated Volume Low through Uu,QCI=4
16-174
Short Name
Drb.IpThrouDlVoL.QCI4
Counter Description
The counter provides the other part volume of QCI4 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.12 C373343749
Counter Name
DL Aggregated Time,QCI=4
Short Name
Drb.IpThrouDlTime.QCI4
Counter Description
The eNodeB collects the time of QCI4 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
16-175
Refer to .
Update Description
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.13 C373343750
Counter Name
DL Aggregated Volume High through Uu,QCI=5
Short Name
Drb.IpThrouDlVoH.QCI5
Counter Description
The counter provides the part volume of QCI5 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
16-176
Sampling Period
15 min
Unit
Mbit
16.1.7.3.14 C373343751
Counter Name
DL Aggregated Volume Low through Uu,QCI=5
Short Name
Drb.IpThrouDlVoL.QCI5
Counter Description
The counter provides the other part volume of QCI5 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.15 C373343752
Counter Name
DL Aggregated Time,QCI=5
16-177
Short Name
Drb.IpThrouDlTime.QCI5
Counter Description
The eNodeB collects the time of QCI5 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.16 C373343753
Counter Name
DL Aggregated Volume High through Uu,QCI=6
Short Name
Drb.IpThrouDlVoH.QCI6
Counter Description
The counter provides the part volume of QCI6 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air interface on the
downlink
16-178
Refer to .
Update Description
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.17 C373343754
Counter Name
DL Aggregated Volume Low through Uu,QCI=6
Short Name
Drb.IpThrouDlVoL.QCI6
Counter Description
The counter provides the other part volume of QCI6 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
16-179
Sampling Period
15 min
Unit
Kbit
16.1.7.3.18 C373343755
Counter Name
DL Aggregated Time,QCI=6
Short Name
Drb.IpThrouDlTime.QCI6
Counter Description
The eNodeB collects the time of QCI6 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.19 C373343756
Counter Name
DL Aggregated Volume High through Uu,QCI=7
Short Name
Drb.IpThrouDlVoH.QCI7
16-180
Counter Description
The counter provides the part volume of QCI7 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.20 C373343757
Counter Name
DL Aggregated Volume Low through Uu,QCI=7
Short Name
Drb.IpThrouDlVoL.QCI7
Counter Description
The counter provides the other part volume of QCI7 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air interface on the
downlink
16-181
Refer to .
Update Description
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.21 C373343758
Counter Name
DL Aggregated Time,QCI=7
Short Name
Drb.IpThrouDlTime.QCI7
Counter Description
The eNodeB collects the time of QCI7 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
16-182
Unit
ms
16.1.7.3.22 C373343759
Counter Name
DL Aggregated Volume High through Uu,QCI=8
Short Name
Drb.IpThrouDlVoH.QCI8
Counter Description
The counter provides the part volume of QCI8 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.23 C373343760
Counter Name
DL Aggregated Volume Low through Uu,QCI=8
Short Name
Drb.IpThrouDlVoL.QCI8
16-183
Counter Description
The counter provides the other part volume of QCI8 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.24 C373343761
Counter Name
DL Aggregated Time,QCI=8
Short Name
Drb.IpThrouDlTime.QCI8
Counter Description
The eNodeB collects the time of QCI8 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
16-184
Update Description
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.25 C373343762
Counter Name
DL Aggregated Volume High through Uu,QCI=9
Short Name
Drb.IpThrouDlVoH.QCI9
Counter Description
The counter provides the part volume of QCI9 PDCP SDU transmitted by eNodeB to UE
on the downlink.The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
16-185
Unit
Mbit
16.1.7.3.26 C373343763
Counter Name
DL Aggregated Volume Low through Uu,QCI=9
Short Name
Drb.IpThrouDlVoL.QCI9
Counter Description
The counter provides the other part volume of QCI9 PDCP SDU transmitted by eNodeB to
UE on the downlink. The total volume = volume High + Volume Low. When the eNodeB
get the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have
been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air interface on the
downlink
Refer to .
Update Description
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.27 C373343764
Counter Name
DL Aggregated Time,QCI=9
Short Name
Drb.IpThrouDlTime.QCI9
16-186
Counter Description
The eNodeB collects the time of QCI9 traffic buffer from buffered data to empty on the
downlink on the downlink at sampling period.
Triggering Point
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface on the downlink
Refer to .
Update Description
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface on the
downlink,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.28 C373343765
Counter Name
UL Aggregated Volume High,QCI=1
Short Name
Drb.IpThrouUlVoH.QCI1
Counter Description
The counter provides the part volume of QCI1 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
16-187
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.29 C373343766
Counter Name
UL Aggregated Volume Low,QCI=1
Short Name
Drb.IpThrouUlVoL.QCI1
Counter Description
The counter provides the other part volume of QCI1 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.30 C373343767
Counter Name
UL Aggregated Time,QCI=1
16-188
Short Name
Drb.IpThrouUlTime.QCI1
Counter Description
The eNodeB collects the time of QCI1 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI1 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
The counter is incremented by the time of QCI1 PDCP SDU collected at sampling time.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.31 C373343768
Counter Name
UL Aggregated Volume High,QCI=2
Short Name
Drb.IpThrouUlVoH.QCI2
Counter Description
The counter provides the part volume of QCI2 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
16-189
Update Description
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.32 C373343769
Counter Name
UL Aggregated Volume Low,QCI=2
Short Name
Drb.IpThrouUlVoL.QCI2
Counter Description
The counter provides the other part volume of QCI2 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16-190
16.1.7.3.33 C373343770
Counter Name
UL Aggregated Time,QCI=2
Short Name
Drb.IpThrouUlTime.QCI2
Counter Description
The eNodeB collects the time of QCI2 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.34 C373343771
Counter Name
UL Aggregated Volume High,QCI=3
Short Name
Drb.IpThrouUlVoH.QCI3
Counter Description
The counter provides the part volume of QCI3 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
16-191
Triggering Point
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.35 C373343772
Counter Name
UL Aggregated Volume Low,QCI=3
Short Name
Drb.IpThrouUlVoL.QCI3
Counter Description
The counter provides the other part volume of QCI3 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
16-192
Sampling Period
15 min
Unit
Kbit
16.1.7.3.36 C373343773
Counter Name
UL Aggregated Time,QCI=3
Short Name
Drb.IpThrouUlTime.QCI3
Counter Description
The eNodeB collects the time of QCI3 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.37 C373343774
Counter Name
UL Aggregated Volume High,QCI=4
Short Name
Drb.IpThrouUlVoH.QCI4
16-193
Counter Description
The counter provides the part volume of QCI4 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.38 C373343775
Counter Name
UL Aggregated Volume Low,QCI=4
Short Name
Drb.IpThrouUlVoL.QCI4
Counter Description
The counter provides the other part volume of QCI4 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
16-194
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.39 C373343776
Counter Name
UL Aggregated Time,QCI=4
Short Name
Drb.IpThrouUlTime.QCI4
Counter Description
The eNodeB collects the time of QCI4 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.40 C373343777
Counter Name
UL Aggregated Volume High,QCI=5
16-195
Short Name
Drb.IpThrouUlVoH.QCI5
Counter Description
The counter provides the part volume of QCI5 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.41 C373343778
Counter Name
UL Aggregated Volume Low,QCI=5
Short Name
Drb.IpThrouUlVoL.QCI5
Counter Description
The counter provides the other part volume of QCI5 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
16-196
Update Description
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.42 C373343779
Counter Name
UL Aggregated Time,QCI=5
Short Name
Drb.IpThrouUlTime.QCI5
Counter Description
The eNodeB collects the time of QCI5 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-197
16.1.7.3.43 C373343780
Counter Name
UL Aggregated Volume High,QCI=6
Short Name
Drb.IpThrouUlVoH.QCI6
Counter Description
The counter provides the part volume of QCI6 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.44 C373343781
Counter Name
UL Aggregated Volume Low,QCI=6
Short Name
Drb.IpThrouUlVoL.QCI6
Counter Description
The counter provides the other part volume of QCI6 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
16-198
Triggering Point
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.45 C373343782
Counter Name
UL Aggregated Time,QCI=6
Short Name
Drb.IpThrouUlTime.QCI6
Counter Description
The eNodeB collects the time of QCI6 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
16-199
Sampling Period
15 min
Unit
ms
16.1.7.3.46 C373343783
Counter Name
UL Aggregated Volume High,QCI=7
Short Name
Drb.IpThrouUlVoH.QCI7
Counter Description
The counter provides the part volume of QCI7 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.47 C373343784
Counter Name
UL Aggregated Volume Low,QCI=7
Short Name
Drb.IpThrouUlVoL.QCI7
16-200
Counter Description
The counter provides the other part volume of QCI7 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.48 C373343785
Counter Name
UL Aggregated Time,QCI=7
Short Name
Drb.IpThrouUlTime.QCI7
Counter Description
The eNodeB collects the time of QCI7 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
16-201
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.49 C373343786
Counter Name
UL Aggregated Volume High,QCI=8
Short Name
Drb.IpThrouUlVoH.QCI8
Counter Description
The counter provides the part volume of QCI8 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.50 C373343787
Counter Name
UL Aggregated Volume Low,QCI=8
16-202
Short Name
Drb.IpThrouUlVoL.QCI8
Counter Description
The counter provides the other part volume of QCI8 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.51 C373343788
Counter Name
UL Aggregated Time,QCI=8
Short Name
Drb.IpThrouUlTime.QCI8
Counter Description
The eNodeB collects the time of QCI8 traffic buffer from buffered data to empty on the
uplink at sampling period.
Triggering Point
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
16-203
Update Description
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.52 C373343789
Counter Name
UL Aggregated Volume High,QCI=9
Short Name
Drb.IpThrouUlVoH.QCI9
Counter Description
The counter provides the part volume of QCI9 PDCP SDU transmitted by eNodeB to UE
on the uplink.The total volume = volume High + Volume Low.
Triggering Point
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16-204
16.1.7.3.53 C373343790
Counter Name
UL Aggregated Volume Low,QCI=9
Short Name
Drb.IpThrouUlVoL.QCI9
Counter Description
The counter provides the other part volume of QCI9 PDCP SDU transmitted by eNodeB
to UE on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer on the uplink,the
counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.54 C373343791
Counter Name
UL Aggregated Time,QCI=9
Short Name
Drb.IpThrouUlTime.QCI9
Counter Description
The eNodeB collects the time of QCI9 traffic buffer from buffered data to empty on the
uplink at sampling period.
16-205
Triggering Point
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface on the uplink
Refer to .
Update Description
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface on the uplink,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.55 C373343804
Counter Name
UL Aggregated Volume High
Short Name
Drb.IpThrouUlVoH
Counter Description
The counter provides the part volume of PDCP SDU transmitted by eNodeB to UE on the
uplink.The total volume = volume High + Volume Low.
Triggering Point
When a PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a PDCP SDU are received by PDCP layer from RLC layer on the uplink,the counter
is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
16-206
Sampling Period
15 min
Unit
Mbit
16.1.7.3.56 C373343805
Counter Name
UL Aggregated Volume Low
Short Name
Drb.IpThrouUlVoL
Counter Description
The counter provides the other part volume of PDCP SDU transmitted by eNodeB to UE
on the uplink. The total volume = volume High + Volume Low.
Triggering Point
When a PDCP SDU are received by PDCP layer from RLC layer on the uplink
Refer to .
Update Description
When a PDCP SDU are received by PDCP layer from RLC layer on the uplink,the counter
is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.57 C373343806
Counter Name
DL Aggregated Volume High through Uu
Short Name
Drb.IpThrouDlVoH
16-207
Counter Description
The counter provides the part volume of PDCP SDU transmitted by eNodeB to UE on
the downlink.The total volume = volume High + Volume Low. When the eNodeB get the
successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the downlink
Refer to .
Update Description
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Mbit
16.1.7.3.58 C373343807
Counter Name
DL Aggregated Volume Low through Uu
Short Name
Drb.IpThrouDlVoL
Counter Description
The counter provides the other part volume of PDCP SDU transmitted by eNodeB to UE
on the downlink. The total volume = volume High + Volume Low. When the eNodeB get
the successful DL TB HARQ feedback and all frag of PDCP SDU related to TB have been
transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the downlink
Refer to .
16-208
Update Description
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the
downlink,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.59 C373343808
Counter Name
DL Aggregated Volume High in RLC UM Mode through Uu
Short Name
Drb.DlUmVoH
Counter Description
The counter provides the part volume of PDCP SDU transmitted by eNodeB to UE on the
downlink in RLC UM Mode.The total volume = volume High + Volume Low. When the
eNodeB get the successful DL TB HARQ feedback and all frag of PDCP SDU related to
TB have been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the downlink
in RLC UM Mode
Refer to .
Update Description
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the downlink
in RLC UM Mode,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
16-209
Unit
Mbit
16.1.7.3.60 C373343809
Counter Name
DL Aggregated Volume Low in RLC UM Mode through Uu
Short Name
Drb.DlUmVoL
Counter Description
The counter provides the other part volume of PDCP SDU transmitted by eNodeB to UE
on the downlink in RLC UM Mode. The total volume = volume High + Volume Low. When
the eNodeB get the successful DL TB HARQ feedback and all frag of PDCP SDU related
to TB have been transmitted to the air interface successfully,the counter is collected.
Triggering Point
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the downlink
in RLC UM Mode
Refer to .
Update Description
When all packets of a PDCP SDU are sent by the eNodeB over air interface on the downlink
in RLC UM Mode,the counter is incremented by the bit-size of the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
16.1.7.3.61 C373343810
Counter Name
DL Aggregated Time
Short Name
Drb.IpThrouDlTime
16-210
Counter Description
This counter accumulates the duration that the downlink PDCP buffer activated by each
E-RAB of each UE is not empty.
Triggering Point
This counter calculates the duration for the downlink eNodeB buffer to be empty since it
has data. The counter accumulates for multiple services.
Refer to .
Update Description
At each sampling point, this counter accumulates the downlink data transmission time
collected within a statistic period. The counter accumulates for multiple services.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.1.7.3.62 C373343811
Counter Name
UL Aggregated Time
Short Name
Drb.IpThrouUlTime
Counter Description
This counter accumulates the duration that the uplink PDCP buffer activated by each
E-RAB of each UE is not empty. Whether the uplink PDCP buffer is empty depends on
the BSR report.
Triggering Point
This counter calculates the duration for the uplink eNodeB buffer to be empty since it has
data. The counter accumulates for multiple services.
Refer to .
16-211
Update Description
At each sampling point, this counter accumulates the uplink data transmission time
collected within a statistic period. The counter accumulates for multiple services.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-212
16.2.1.3.1 C373364109
Counter Name
DL QCI1 IP Packet Delay
Short Name
DRB.IpLateDl.QCI1
Counter Description
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI1 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-213
Unit
ms
16.2.1.3.2 C373364110
Counter Name
DL QCI2 IP Packet Delay
Short Name
DRB.IpLateDl.QCI2
Counter Description
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI2 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.1.3.3 C373364111
Counter Name
DL QCI3 IP Packet Delay
Short Name
DRB.IpLateDl.QCI3
16-214
Counter Description
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI3 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.1.3.4 C373364112
Counter Name
DL QCI4 IP Packet Delay
Short Name
DRB.IpLateDl.QCI4
Counter Description
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
16-215
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI4 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.1.3.5 C373364113
Counter Name
DL QCI5 IP Packet Delay
Short Name
DRB.IpLateDl.QCI5
Counter Description
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI5 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-216
Unit
ms
16.2.1.3.6 C373364114
Counter Name
DL QCI6 IP Packet Delay
Short Name
DRB.IpLateDl.QCI6
Counter Description
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI6 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.1.3.7 C373364115
Counter Name
DL QCI7 IP Packet Delay
Short Name
DRB.IpLateDl.QCI7
16-217
Counter Description
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI7 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.1.3.8 C373364116
Counter Name
DL QCI8 IP Packet Delay
Short Name
DRB.IpLateDl.QCI8
Counter Description
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
16-218
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI8 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.1.3.9 C373364117
Counter Name
DL QCI9 IP Packet Delay
Short Name
DRB.IpLateDl.QCI9
Counter Description
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI9 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-219
Unit
ms
16.2.1.3.10 C373364119
Counter Name
DL IP Packet Delay
Short Name
DRB.IpLateDl
Counter Description
When a PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When the
first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the PDCP SDU, and than records the end
time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-220
Counter Name
DL QCI1 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI1
Counter Description
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
16-221
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI1 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.2 C373364101
Counter Name
DL QCI2 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI2
Counter Description
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI2 PDCP SDU.
Counter Type
Accumulated value
16-222
Sampling Period
15 min
Unit
ms
16.2.2.3.3 C373364102
Counter Name
DL QCI3 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI3
Counter Description
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI3 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.4 C373364103
Counter Name
DL QCI4 PDCP SDU Delay
16-223
Short Name
DRB.PdcpSduDelayDl.QCI4
Counter Description
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI4 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.5 C373364104
Counter Name
DL QCI5 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI5
Counter Description
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
16-224
Triggering Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI5 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.6 C373364105
Counter Name
DL QCI6 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI6
Counter Description
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI6 PDCP SDU.
16-225
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.7 C373364106
Counter Name
DL QCI7 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI7
Counter Description
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI7 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-226
16.2.2.3.8 C373364107
Counter Name
DL QCI8 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI8
Counter Description
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI8 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.9 C373364108
Counter Name
DL QCI9 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI9
16-227
Counter Description
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI9 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.10 C373364118
Counter Name
DL PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl
Counter Description
When a PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When the
last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the PDCP SDU, and than records the end
time at getting the all positive HARQ acknowledgment for the PDCP SDU.
16-228
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.2.2.3.11 C373364130
Counter Name
QCI1 DL PDCP SDU Number for Delay in Range 1
Short Name
-
Counter Description
This counter counts the number of PDCP SDU packets that the PDCP layer successfully
receives HARQ acknowledgement to all the QCI1 SDU fragments within the delay specified
by range 1. Range 1: less than 80 ms.
Triggering Point
This counter counts the number of PDCP SDU packets that the downlink QCI1 delay is
specified by range 1.
Refer to .
Update Description
This counter accumulates the number of PDCP SDUs that the downlink QCI1 delay is
specified by range 1.
Counter Type
Accumulated value
16-229
Sampling Period
15 min
Unit
unit
16.2.2.3.12 C373364131
Counter Name
QCI1 DL PDCP SDU Number for Delay in Range 2
Short Name
-
Counter Description
This counter counts the number of PDCP SDU packets that the PDCP layer successfully
receives HARQ acknowledgement to all the QCI1 SDU fragments within the delay specified
by range 2. Range 2: greater than 80 ms and less than 115 ms.
Triggering Point
This counter counts the number of PDCP SDU packets that the downlink QCI1 delay is
within 2.
Refer to .
Update Description
This counter accumulates the number of PDCP SDUs that the downlink QCI1 delay is
specified by range 2.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.2.2.3.13 C373364132
Counter Name
QCI1 DL PDCP SDU Number for Delay in Range 3
16-230
Short Name
-
Counter Description
This counter counts the number of PDCP SDU packets that the PDCP layer successfully
receives HARQ acknowledgement to all the QCI1 SDU fragments within the delay specified
by range 3. Range 3: greater than 115 ms.
Triggering Point
This counter counts the number of PDCP SDU packets that the downlink QCI1 delay is
specified by range 3.
Refer to .
Update Description
This counter accumulates the number of PDCP SDUs that the downlink QCI1 delay is
specified by range 3.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.2.2.3.14 C373364140
Counter Name
DL Radio VoIP Effective MOS
Short Name
-
Counter Description
This counter calculates the VoIP equivalent MOS value based on the downlink delay jitter.
Triggering Point
This counter calculates the VoIP equivalent MOS value based on the downlink delay jitter.
Refer to .
16-231
Update Description
This counter is updated to the latest equivalent MOS value.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
Counter Name
Call Time before Drop,QCI=1
Short Name
Drb.BeforeDropTime.QCI1
Counter Description
After a data radio bearer with QCI = 1 is successfully setup, the eNodeB start to detect
the active session time of the bearer. When the bearer is initiated to release by eNodeB,
report the total session time of it. The counter provides the number of atcivity session time.
16-232
Triggering Point
When a data radio bearer with QCI = 1 is initiated to release by eNodeB
Refer to .
Update Description
When a data radio bearer with QCI = 1 is initiated to release by eNodeB,the counter is
increased by the in-session activity time for the bearer.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.2.3.3.2 C373343797
Counter Name
Call Time before Drop,QCI=2
Short Name
Drb.BeforeDropTime.QCI2
Counter Description
After a data radio bearer with QCI = 2 is successfully setup, the eNodeB start to detect
the active session time of the bearer. When the bearer is initiated to release by eNodeB,
report the total session time of it.The counter provides the number of atcivity session time.
Triggering Point
When a data radio bearer with QCI = 2 is initiated to release by eNodeB
Refer to .
Update Description
When a data radio bearer with QCI = 2 is initiated to release by eNodeB,the counter is
increased by the in-session activity time for the bearer.
Counter Type
Accumulated value
16-233
Sampling Period
15 min
Unit
unit
16.2.3.3.3 C373343798
Counter Name
Call Time before Drop,QCI=3
Short Name
Drb.BeforeDropTime.QCI3
Counter Description
After a data radio bearer with QCI = 3 is successfully setup, the eNodeB start to detect
the active session time of the bearer. When the bearer is initiated to release by eNodeB,
report the total session time of it. The counter provides the number of atcivity session time.
Triggering Point
When a data radio bearer with QCI = 3 is initiated to release by eNodeB
Refer to .
Update Description
When a data radio bearer with QCI = 3 is initiated to release by eNodeB,the counter is
increased by the in-session activity time for the bearer.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.2.3.3.4 C373343799
Counter Name
Call Time before Drop,QCI=4
16-234
Short Name
Drb.BeforeDropTime.QCI4
Counter Description
After a data radio bearer with QCI = 4 is successfully setup, the eNodeB start to detect
the active session time of the bearer. When the bearer is initiated to release by eNodeB,
report the total session time of it. The counter provides the number of atcivity session time.
Triggering Point
When a data radio bearer with QCI = 4 is initiated to release by eNodeB
Refer to .
Update Description
When a data radio bearer with QCI = 4 is initiated to release by eNodeB,the counter is
increased by the in-session activity time for the bearer.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-235
16.3.1.3.1 C373353900
Counter Name
UL PDCP SDU Loss Number,QCI=1
Short Name
DRB.PdcpSduLossUl.QCI1
Counter Description
When the eNodeB PDCP layer receives the QCI1 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
16-236
Triggering Point
When the eNodeB detects the QCI1 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI1 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.2 C373353901
Counter Name
UL PDCP SDU Loss Number,QCI=2
Short Name
DRB.PdcpSduLossUl.QCI2
Counter Description
When the eNodeB PDCP layer receives the QCI2 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI2 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI2 UL PDCP SDU sequece number discontinuity.
16-237
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.3 C373353902
Counter Name
UL PDCP SDU Loss Number ,QCI=3
Short Name
DRB.PdcpSduLossUl.QCI3
Counter Description
When the eNodeB PDCP layer receives the QCI3 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI3 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI3 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-238
16.3.1.3.4 C373353903
Counter Name
UL PDCP SDU Loss Number ,QCI=4
Short Name
DRB.PdcpSduLossUl.QCI4
Counter Description
When the eNodeB PDCP layer receives the QCI4 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI4 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI4 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.5 C373353904
Counter Name
UL PDCP SDU Loss Number ,QCI=5
Short Name
DRB.PdcpSduLossUl.QCI5
16-239
Counter Description
When the eNodeB PDCP layer receives the QCI5 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI5 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI5 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.6 C373353905
Counter Name
UL PDCP SDU Loss Number ,QCI=6
Short Name
DRB.PdcpSduLossUl.QCI6
Counter Description
When the eNodeB PDCP layer receives the QCI6 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI6 PDCP SDU sequece number discontinuity in UL.
16-240
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI6 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.7 C373353906
Counter Name
UL PDCP SDU Loss Number ,QCI=7
Short Name
DRB.PdcpSduLossUl.QCI7
Counter Description
When the eNodeB PDCP layer receives the QCI7 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI7 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI7 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
16-241
Sampling Period
15 min
Unit
unit
16.3.1.3.8 C373353907
Counter Name
UL PDCP SDU Loss Number ,QCI=8
Short Name
DRB.PdcpSduLossUl.QCI8
Counter Description
When the eNodeB PDCP layer receives the QCI8 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI8 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI8 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.9 C373353908
Counter Name
UL PDCP SDU Loss Number ,QCI=9
16-242
Short Name
DRB.PdcpSduLossUl.QCI9
Counter Description
When the eNodeB PDCP layer receives the QCI9 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI9 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI9 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.10 C373353909
Counter Name
DL PDCP SDU Loss Number ,QCI=1
Short Name
DRB.PdcpSduAirLossDl.QCI1
Counter Description
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
16-243
Triggering Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.11 C373353910
Counter Name
DL PDCP SDU Loss Number ,QCI=2
Short Name
DRB.PdcpSduAirLossDl.QCI2
Counter Description
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
16-244
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.12 C373353911
Counter Name
DL PDCP SDU Loss Number ,QCI=3
Short Name
DRB.PdcpSduAirLossDl.QCI3
Counter Description
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-245
16.3.1.3.13 C373353912
Counter Name
DL PDCP SDU Loss Number ,QCI=4
Short Name
DRB.PdcpSduAirLossDl.QCI4
Counter Description
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.14 C373353913
Counter Name
DL PDCP SDU Loss Number ,QCI=5
Short Name
DRB.PdcpSduAirLossDl.QCI5
16-246
Counter Description
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.15 C373353914
Counter Name
DL PDCP SDU Loss Number ,QCI=6
Short Name
DRB.PdcpSduAirLossDl.QCI6
Counter Description
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
16-247
Update Description
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.16 C373353915
Counter Name
DL PDCP SDU Loss Number ,QCI=7
Short Name
DRB.PdcpSduAirLossDl.QCI7
Counter Description
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
16-248
Unit
unit
16.3.1.3.17 C373353916
Counter Name
DL PDCP SDU Loss Number ,QCI=8
Short Name
DRB.PdcpSduAirLossDl.QCI8
Counter Description
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.18 C373353917
Counter Name
DL PDCP SDU Loss Number ,QCI=9
Short Name
DRB.PdcpSduAirLossDl.QCI9
16-249
Counter Description
the eNodeB discards the QCI9 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.19 C373353956
Counter Name
UL PDCP SDU Loss Number
Short Name
DRB.PdcpSduLossUl
Counter Description
When the eNodeB PDCP layer receives the PDCP PDU from the RLC layer, compare the
received PDU sequence number with the expected sequence number. If the received is
larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the PDCP SDU sequece number discontinuity in UL.
Refer to .
16-250
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.1.3.20 C373353957
Counter Name
DL PDCP SDU Loss Number
Short Name
DRB.PdcpSduAirLossDl
Counter Description
the eNodeB discards the PDCP SDU when timeout of "timer discard" detecting the SDU
or not DL buffer for the SDU. If at least a part of it has been transmitted over the air but
not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the PDCP SDU in DL, for which
at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
16-251
Unit
unit
16.3.2.3.1 C373353918
Counter Name
DL PDCP SDU Discard Number ,QCI=1
Short Name
DRB.PdcpSduAirDropDl.QCI1
Counter Description
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
16-252
Triggering Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.2 C373353919
Counter Name
DL PDCP SDU Discard Number ,QCI=2
Short Name
DRB.PdcpSduAirDropDl.QCI2
Counter Description
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP SDU in DL, for
which no part has been transmitted over the air.
16-253
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.3 C373353920
Counter Name
DL PDCP SDU Discard Number ,QCI=3
Short Name
DRB.PdcpSduAirDropDl.QCI3
Counter Description
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-254
16.3.2.3.4 C373353921
Counter Name
DL PDCP SDU Discard Number ,QCI=4
Short Name
DRB.PdcpSduAirDropDl.QCI4
Counter Description
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.5 C373353922
Counter Name
DL PDCP SDU Discard Number ,QCI=5
Short Name
DRB.PdcpSduAirDropDl.QCI5
16-255
Counter Description
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.6 C373353923
Counter Name
DL PDCP SDU Discard Number ,QCI=6
Short Name
DRB.PdcpSduAirDropDl.QCI6
Counter Description
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
16-256
Update Description
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.7 C373353924
Counter Name
DL PDCP SDU Discard Number ,QCI=7
Short Name
DRB.PdcpSduAirDropDl.QCI7
Counter Description
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-257
Unit
unit
16.3.2.3.8 C373353925
Counter Name
DL PDCP SDU Discard Number ,QCI=8
Short Name
DRB.PdcpSduAirDropDl.QCI8
Counter Description
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.9 C373353926
Counter Name
DL PDCP SDU Discard Number ,QCI=9
Short Name
DRB.PdcpSduAirDropDl.QCI9
16-258
Counter Description
the eNodeB will discard the QCI9 PDCP SDU and no part of which has been transmitted
over the air when "timer discard" timer of detecting the SDU expires or there is no DL buffer
for the SDU. The counter is used to count the number of the SDU.
Triggering Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.2.3.10 C373353958
Counter Name
DL PDCP SDU Discard Number
Short Name
DRB.PdcpSduAirDropDl
Counter Description
the eNodeB discards the PDCP SDU when timeout of "timer discard" detecting the SDU
or not DL buffer for the SDU. If no part of it has been transmitted over the air, the counter
is counted.
Triggering Point
When the eNodeB discards the PDCP SDU in DL, for which no part has been transmitted
over the air
Refer to .
16-259
Update Description
The counter is increased by 1 when the eNodeB discards the PDCP SDU in DL, for which
no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-260
Counter Name
UL PDCP SDU Number ,QCI=1
Short Name
DRB.PdcpSduUl.QCI1
Counter Description
After the PDCP layer receives the QCI1 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 PDCP packet in the uplink
16-261
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI1 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.2 C373353928
Counter Name
UL PDCP SDU Number ,QCI=2
Short Name
DRB.PdcpSduUl.QCI2
Counter Description
After the PDCP layer receives the QCI2 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI2 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
16-262
Unit
unit
16.3.3.3.3 C373353929
Counter Name
UL PDCP SDU Number ,QCI=3
Short Name
DRB.PdcpSduUl.QCI3
Counter Description
After the PDCP layer receives the QCI3 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI3 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.4 C373353930
Counter Name
UL PDCP SDU Number ,QCI=4
Short Name
DRB.PdcpSduUl.QCI4
16-263
Counter Description
After the PDCP layer receives the QCI4 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI4 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.5 C373353931
Counter Name
UL PDCP SDU Number ,QCI=5
Short Name
DRB.PdcpSduUl.QCI5
Counter Description
After the PDCP layer receives the QCI5 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 PDCP packet in the uplink
Refer to .
16-264
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI5 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.6 C373353932
Counter Name
UL PDCP SDU Number ,QCI=6
Short Name
DRB.PdcpSduUl.QCI6
Counter Description
After the PDCP layer receives the QCI6 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI6 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
16-265
Unit
unit
16.3.3.3.7 C373353933
Counter Name
UL PDCP SDU Number ,QCI=7
Short Name
DRB.PdcpSduUl.QCI7
Counter Description
After the PDCP layer receives the QCI7 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI7 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.8 C373353934
Counter Name
UL PDCP SDU Number ,QCI=8
Short Name
DRB.PdcpSduUl.QCI8
16-266
Counter Description
After the PDCP layer receives the QCI8 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI8 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.9 C373353935
Counter Name
UL PDCP SDU Number ,QCI=9
Short Name
DRB.PdcpSduUl.QCI9
Counter Description
After the PDCP layer receives the QCI9 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 PDCP packet in the uplink
Refer to .
16-267
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI9 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.10 C373353936
Counter Name
DL PDCP SDU Number ,QCI=1
Short Name
DRB.PdcpSduDl.QCI1
Counter Description
When the eNodeB PDCP layer receives the QCI1 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 PDCP SDU.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI1 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-268
16.3.3.3.11 C373353937
Counter Name
DL PDCP SDU Number ,QCI=2
Short Name
DRB.PdcpSduDl.QCI2
Counter Description
When the eNodeB PDCP layer receives the QCI2 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI2 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.12 C373353938
Counter Name
DL PDCP SDU Number ,QCI=3
Short Name
DRB.PdcpSduDl.QCI3
Counter Description
When the eNodeB PDCP layer receives the QCI3 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
16-269
Triggering Point
When the eNodeB PDCP layer receives the QCI3 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI3 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.13 C373353939
Counter Name
DL PDCP SDU Number ,QCI=4
Short Name
DRB.PdcpSduDl.QCI4
Counter Description
When the eNodeB PDCP layer receives the QCI4 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI4 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
16-270
Sampling Period
15 min
Unit
unit
16.3.3.3.14 C373353940
Counter Name
DL PDCP SDU Number ,QCI=5
Short Name
DRB.PdcpSduDl.QCI5
Counter Description
When the eNodeB PDCP layer receives the QCI5 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI5 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.15 C373353941
Counter Name
DL PDCP SDU Number ,QCI=6
Short Name
DRB.PdcpSduDl.QCI6
16-271
Counter Description
When the eNodeB PDCP layer receives the QCI6 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI6 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.16 C373353942
Counter Name
DL PDCP SDU Number ,QCI=7
Short Name
DRB.PdcpSduDl.QCI7
Counter Description
When the eNodeB PDCP layer receives the QCI7 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI7 PDCP
SDU from the SGW or the other eNodeB.
16-272
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.17 C373353943
Counter Name
DL PDCP SDU Number ,QCI=8
Short Name
DRB.PdcpSduDl.QCI8
Counter Description
When the eNodeB PDCP layer receives the QCI8 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI8 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.18 C373353944
Counter Name
DL PDCP SDU Number ,QCI=9
16-273
Short Name
DRB.PdcpSduDl.QCI9
Counter Description
When the eNodeB PDCP layer receives the QCI9 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI9 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.19 C373353947
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=1
Short Name
DRB.PdcpSduHarqDl.QCI1
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI1 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
16-274
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI1 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.20 C373353948
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=2
Short Name
DRB.PdcpSduHarqDl.QCI2
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI2 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI2 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-275
Unit
unit
16.3.3.3.21 C373353949
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=3
Short Name
DRB.PdcpSduHarqDl.QCI3
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI3 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI3 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.22 C373353950
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=4
Short Name
DRB.PdcpSduHarqDl.QCI4
16-276
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI4 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI4 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.23 C373353951
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=5
Short Name
DRB.PdcpSduHarqDl.QCI5
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI5 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
16-277
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI5 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.24 C373353952
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=6
Short Name
DRB.PdcpSduHarqDl.QCI6
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI6 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI6 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-278
Unit
unit
16.3.3.3.25 C373353953
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=7
Short Name
DRB.PdcpSduHarqDl.QCI7
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI7 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI7 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.26 C373353954
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=8
Short Name
DRB.PdcpSduHarqDl.QCI8
16-279
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI8 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI8 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.27 C373353955
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=9
Short Name
DRB.PdcpSduHarqDl.QCI9
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI9 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
16-280
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI9 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.28 C373353959
Counter Name
UL PDCP SDU Number
Short Name
DRB.PdcpSduUl
Counter Description
After the PDCP layer receives the PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the PDCP packet in
the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
16-281
Unit
unit
16.3.3.3.29 C373353960
Counter Name
DL PDCP SDU Number
Short Name
DRB.PdcpSduDl
Counter Description
When the eNodeB PDCP layer receives the PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the PDCP SDU.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the PDCP SDU from
the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.30 C373353961
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.PdcpSduHarqDl
16-282
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about PDCP SDU,for which all
parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.31 C373354022
Counter Name
DL PDCP SDU Number in Control Plane
Short Name
SRB.PdcpSduDl
Counter Description
This counter counts the number of the control plane PDCP SDUs that the eNodeB sends
through the Uu interface within a statistic period.
Triggering Point
This counter counts the number of downlink SRBs that reaches the PDCP layer.
Refer to .
Update Description
This counter accumulates the number of the control plane PDCP SDU packets that the
eNodeB sends through the Uu interface within a statistic period.
16-283
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.3.3.3.32 C373354023
Counter Name
UL PDCP SDU Number in Control Plane
Short Name
SRB.PdcpSduUl
Counter Description
This counter counts the number of the control plane PDCP SDUs that the eNodeB
successfully receives through the Uu interface within a statistic period.
Triggering Point
This counter counts the number of uplink SRBs that reaches the PDCP layer (including
the lost SDUs according to the SN).
Refer to .
Update Description
This counter accumulates the number of the control plane PDCP SDUs that the eNodeB
successfully receives through the Uu interface within a statistic period.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-284
16-285
43 C373384365 Maximum Number of RRC Connection User that have Data Transmission
44 C373384366 Mean Number of RRC Connection User that have Data Transmission
45 C373940411 Maximum Number of RRC Connection User that have Data Transmission
(eNB)
46 C373940412 Mean Number of RRC Connection User that have Data Transmission (eNB)
16.4.1.3.1 C373384300
Counter Name
Average UL Active User Number(QCI=1)
Short Name
DRB.UEActiveUl.QCI1
16-286
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI1 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.2 C373384301
Counter Name
Average UL Active User Number(QCI=2)
Short Name
DRB.UEActiveUl.QCI2
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI2 DRB at
sampling time.
Refer to .
16-287
Update Description
The counter is updated by accumulating all the sample UL QCI2 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.3 C373384302
Counter Name
Average UL Active User Number(QCI=3)
Short Name
DRB.UEActiveUl.QCI3
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI3 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-288
Unit
unit
16.4.1.3.4 C373384303
Counter Name
Average UL Active User Number(QCI=4)
Short Name
DRB.UEActiveUl.QCI4
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI4 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.5 C373384304
Counter Name
Average UL Active User Number(QCI=5)
Short Name
DRB.UEActiveUl.QCI5
16-289
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI5 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.6 C373384305
Counter Name
Average UL Active User Number(QCI=6)
Short Name
DRB.UEActiveUl.QCI6
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI6 DRB at
sampling time.
Refer to .
16-290
Update Description
The counter is updated by accumulating all the sample UL QCI6 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.7 C373384306
Counter Name
Average UL Active User Number(QCI=7)
Short Name
DRB.UEActiveUl.QCI7
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI7 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-291
Unit
unit
16.4.1.3.8 C373384307
Counter Name
Average UL Active User Number(QCI=8)
Short Name
DRB.UEActiveUl.QCI8
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI8 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.9 C373384308
Counter Name
Average UL Active User Number(QCI=9)
Short Name
DRB.UEActiveUl.QCI9
16-292
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI9 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.10 C373384309
Counter Name
Average DL Active User Number(QCI=1)
Short Name
DRB.UEActiveDl.QCI1
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI1 DRB at
sampling time.
Refer to .
16-293
Update Description
The counter is updated by accumulating all the sample DL QCI1 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.11 C373384310
Counter Name
Average DL Active User Number(QCI=2)
Short Name
DRB.UEActiveDl.QCI2
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI2 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-294
Unit
unit
16.4.1.3.12 C373384311
Counter Name
Average DL Active User Number(QCI=3)
Short Name
DRB.UEActiveDl.QCI3
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI3 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI3 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.13 C373384312
Counter Name
Average DL Active User Number(QCI=4)
Short Name
DRB.UEActiveDl.QCI4
16-295
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI4 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.14 C373384313
Counter Name
Average DL Active User Number(QCI=5)
Short Name
DRB.UEActiveDl.QCI5
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI5 DRB at
sampling time.
Refer to .
16-296
Update Description
The counter is updated by accumulating all the sample DL QCI5 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.15 C373384314
Counter Name
Average DL Active User Number(QCI=6)
Short Name
DRB.UEActiveDl.QCI6
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI6 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-297
Unit
unit
16.4.1.3.16 C373384315
Counter Name
Average DL Active User Number(QCI=7)
Short Name
DRB.UEActiveDl.QCI7
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI7 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI7 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.17 C373384316
Counter Name
Average DL Active User Number(QCI=8)
Short Name
DRB.UEActiveDl.QCI8
16-298
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI8 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.18 C373384317
Counter Name
Average DL Active User Number(QCI=9)
Short Name
DRB.UEActiveDl.QCI9
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI9 DRB at
sampling time.
Refer to .
16-299
Update Description
The counter is updated by accumulating all the sample DL QCI9 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.19 C373384318
Counter Name
Maximum UL Active User Number(QCI=1)
Short Name
DRB.UEActiveUlMax.QCI1
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI1 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-300
Unit
unit
16.4.1.3.20 C373384319
Counter Name
Maximum UL Active User Number(QCI=2)
Short Name
DRB.UEActiveUlMax.QCI2
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI2 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.21 C373384320
Counter Name
Maximum UL Active User Number(QCI=3)
Short Name
DRB.UEActiveUlMax.QCI3
16-301
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI3 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.22 C373384321
Counter Name
Maximum UL Active User Number(QCI=4)
Short Name
DRB.UEActiveUlMax.QCI4
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI4 DRB at
sampling time.
Refer to .
16-302
Update Description
The counter is replaced with the current value when the current UL QCI4 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.23 C373384322
Counter Name
Maximum UL Active User Number(QCI=5)
Short Name
DRB.UEActiveUlMax.QCI5
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI5 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-303
Unit
unit
16.4.1.3.24 C373384323
Counter Name
Maximum UL Active User Number(QCI=6)
Short Name
DRB.UEActiveUlMax.QCI6
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI6 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.25 C373384324
Counter Name
Maximum UL Active User Number(QCI=7)
Short Name
DRB.UEActiveUlMax.QCI7
16-304
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI7 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.26 C373384325
Counter Name
Maximum UL Active User Number(QCI=8)
Short Name
DRB.UEActiveUlMax.QCI8
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI8 DRB at
sampling time.
Refer to .
16-305
Update Description
The counter is replaced with the current value when the current UL QCI8 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.27 C373384326
Counter Name
Maximum UL Active User Number(QCI=9)
Short Name
DRB.UEActiveUlMax.QCI9
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI9 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-306
Unit
unit
16.4.1.3.28 C373384327
Counter Name
Maximum DL Active User Number(QCI=1)
Short Name
DRB.UEActiveDlMax.QCI1
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI1 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.29 C373384328
Counter Name
Maximum DL Active User Number(QCI=2)
Short Name
DRB.UEActiveDlMax.QCI2
16-307
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI2 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.30 C373384329
Counter Name
Maximum DL Active User Number(QCI=3)
Short Name
DRB.UEActiveDlMax.QCI3
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI3 DRB at
sampling time.
Refer to .
16-308
Update Description
The counter is replaced with the current value when the current DL QCI3 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.31 C373384330
Counter Name
Maximum DL Active User Number(QCI=4)
Short Name
DRB.UEActiveDlMax.QCI4
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI4 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-309
Unit
unit
16.4.1.3.32 C373384331
Counter Name
Maximum DL Active User Number(QCI=5)
Short Name
DRB.UEActiveDlMax.QCI5
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI5 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.33 C373384332
Counter Name
Maximum DL Active User Number(QCI=6)
Short Name
DRB.UEActiveDlMax.QCI6
16-310
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI6 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.34 C373384333
Counter Name
Maximum DL Active User Number(QCI=7)
Short Name
DRB.UEActiveDlMax.QCI7
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI7 DRB at
sampling time.
Refer to .
16-311
Update Description
The counter is replaced with the current value when the current DL QCI7 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.35 C373384334
Counter Name
Maximum DL Active User Number(QCI=8)
Short Name
DRB.UEActiveDlMax.QCI8
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI8 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-312
Unit
unit
16.4.1.3.36 C373384335
Counter Name
Maximum DL Active User Number(QCI=9)
Short Name
DRB.UEActiveDlMax.QCI9
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI9 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.37 C373384348
Counter Name
Maximum Active User Number on User Plane
Short Name
-
16-313
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers for
Data Radio Bearer of traffic class at sampling time. The counter provides the maximum
value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current actives UEs is larger than
the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.38 C373384349
Counter Name
Average Active User Number on User Plane
Short Name
-
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers
for Data Radio Bearer of traffic class at sampling time.The counter provides the average
value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
16-314
Update Description
The counter is updated by accumulating all the sample active UEs, and then dividing the
sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.39 C373384361
Counter Name
Average DL Active E-RAB Number
Short Name
DRB.UEActiveDl
Counter Description
Number of E-RABs for which there is buffered data for the DL in MAC, RLC or PDCP
protocol layers for a Data Radio Bearer of traffic class at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of E-RABs which has data in DL buffer for DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL active E-RABs, and then dividing
the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-315
Unit
unit
16.4.1.3.40 C373384362
Counter Name
Maximum DL Active E-RAB Number
Short Name
DRB.UEActiveDlMax
Counter Description
Number of E-RABs for which there is buffered data for the DL in MAC, RLC or PDCP
protocol layers for a Data Radio Bearer of traffic class at sampling time.The counter
provides the maximum value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of E-RABs which has data in DL buffer for DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL actives E-RABs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.41 C373384363
Counter Name
Average UL Active E-RAB Number
Short Name
DRB.UEActiveUl
16-316
Counter Description
Number of E-RABs for which there is buffered data for the UL in MAC, RLC or PDCP
protocol layers for a Data Radio Bearer of traffic class at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of E-RABs which has data in UL buffer for DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL active E-RABs, and then dividing
the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.4.1.3.42 C373384364
Counter Name
Maximum UL Active E-RAB Number
Short Name
DRB.UEActiveUlMax
Counter Description
Number of E-RABs for which there is buffered data for the UL in MAC, RLC or PDCP
protocol layers for a Data Radio Bearer of traffic class at sampling time.The counter
provides the maximum value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of E-RABs which has data in UL buffer for DRB at
sampling time.
Refer to .
16-317
Update Description
The counter is replaced with the current value when the current UL actives E-RABs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.1.3.43 C373384365
Counter Name
Maximum Number of RRC Connection User that have Data Transmission
Short Name
-
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers for
Data Radio Bearer of traffic class at sampling time. The counter provides the maximum
value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UEs that have data
transmission is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
500 ms
16-318
Unit
unit
16.4.1.3.44 C373384366
Counter Name
Mean Number of RRC Connection User that have Data Transmission
Short Name
-
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers
for Data Radio Bearer of traffic class at sampling time.The counter provides the average
value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs that have data transmission,
and then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
500 ms
Unit
unit
16.4.1.3.45 C373940411
Counter Name
Maximum Number of RRC Connection User that have Data Transmission (eNB)
Short Name
-
16-319
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers for
Data Radio Bearer of traffic class at sampling time. The counter provides the maximum
value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UEs that have data
transmission is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
500 ms
Unit
unit
16.4.1.3.46 C373940412
Counter Name
Mean Number of RRC Connection User that have Data Transmission (eNB)
Short Name
-
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers
for Data Radio Bearer of traffic class at sampling time.The counter provides the average
value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
16-320
Update Description
The counter is updated by accumulating all the sample UEs that have data transmission,
and then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
500 ms
Unit
unit
16.4.2.3.1 C373384336
Counter Name
Maximum Number of UE that can be simultaneously
Short Name
SAE.UEActiveStateMax
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX
16-321
high level.Otherwise the user is inactive.The counter provides the maximum value in the
measurement period.
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current active state UEs is larger
than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.4.2.3.2 C373384337
Counter Name
Minimum Number of UE that can be simultaneously
Short Name
SAE.UEActiveStateMin
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX
high level.Otherwise the user is inactive.The counter provides the minimum value in the
measurement period.
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current active state UEs is smaller
than the prior at sampling point.
16-322
Counter Type
Minimum value
Sampling Period
100 ms
Unit
unit
16.4.2.3.3 C373384338
Counter Name
Average Number of UE that can be simultaneously
Short Name
SAE.UEActiveStateMean
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX high
level.Otherwise the user is inactive.The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample active state UEs, and then dividing
the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16-323
Counter Name
Cat1 Average User Number
Short Name
UECNTX.UserMean.Cat1
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat1 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the UE Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 1 at sampling time.
16-324
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 1, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
16.4.3.3.2 C373384344
Counter Name
Cat2 Average User Number
Short Name
UECNTX.UserMean.Cat2
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat2 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the Ue Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 2 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 2, and then
dividing the sum by the measurement period.
Counter Type
Average value
16-325
Sampling Period
2s
Unit
unit
16.4.3.3.3 C373384345
Counter Name
Cat3 Average User Number
Short Name
UECNTX.UserMean.Cat3
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat3 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the UE Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 3 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 3, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
16.4.3.3.4 C373384346
Counter Name
Cat4 Average User Number
16-326
Short Name
UECNTX.UserMean.Cat4
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat4 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the Ue Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 4 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 4, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
16.4.3.3.5 C373384347
Counter Name
Cat5 Average User Number
Short Name
UECNTX.UserMean.Cat5
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat5 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the Ue Context triggered by MME or eNodeB, the number is
decremented by 1.
16-327
Triggering Point
The eNodeB collects the number of UEs with category = 5 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 5, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
16.4.3.3.6 C373384352
Counter Name
Maximum User Number With CA Capability
Short Name
-
Counter Description
When the eNodeB sends an Initial Context Setup Response message to the MME
and the UE has the CA capability, this counter is incremented. When the target
eNodeB, after receiving a HandoverRequest message from the MME, sends the MME
a HandoverRequestAck message and the UE has the CA capability, this counter is
incremented. When the UE context is released and the UE has the CA capability, this
counter is decremented. The OAM takes a sample every two seconds. This counter
counts the maximum value of all the sampling values in a statistical period (15 minutes).
Triggering Point
At each sampling time, the eNodeB collects the number of users whose terminals have
the CA capability.
Refer to .
16-328
Update Description
In each sampling period, this counter is updated to the maximum number of users whose
terminals have the CA capability.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
16.4.3.3.7 C373384353
Counter Name
Cat6 Average User Number
Short Name
UECNTX.UserMean.Cat6
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat6 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the Ue Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 6 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 6, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
16-329
Unit
unit
16.4.3.3.8 C373384354
Counter Name
Cat7 Average User Number
Short Name
UECNTX.UserMean.Cat7
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat7 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the Ue Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 7 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 7, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
16.4.3.3.9 C373384355
Counter Name
Cat8 Average User Number
Short Name
UECNTX.UserMean.Cat8
16-330
Counter Description
When eNodeB receives the UECapibilityInformation message from UE, it gets the category
of the UE. The number of cat8 user is incremented by 1 When the eNodeB sends the
InitialContextSetupResponse message to MME.
When eNodeB releases the Ue Context triggered by MME or eNodeB, the number is
decremented by 1.
Triggering Point
The eNodeB collects the number of UEs with category = 8 at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UEs with category = 8, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
unit
16.4.3.3.10 C373384356
Counter Name
Maximum User Number of Enabled CA
Short Name
-
Counter Description
This counter is incremented when the eNodeB sends a reconfiguration message to enable
the CA user. It is also incremented when the target eNodeB sends a handover request
acknowledgment to the MME after receiving a handover request from the MME and the
UE has CA capability. This counter is decremented when the UE sends a reconfiguration
message to disable the CA user. It is also decremented when the UE release the context
and the UE has CA capability. The OAM sampling period is 2 s.The maximum value of this
counter is obtained from the maximum value of all sampling points within a statistic period
(15 minutes).
16-331
Triggering Point
At each sampling time, the eNodeB collects the number of users whose terminals has the
CA capability.
Refer to .
Update Description
In each sampling period, this counter is updated to the maximum number of users whose
terminals have the CA capability.
Counter Type
Maximum value
Sampling Period
2s
Unit
unit
16.5.1.3.1 C373454816
Counter Name
Number of RLC PDU Retransmission
16-332
Short Name
RLCPDU.RetransNum
Counter Description
The counter provides the number of RLC PDUs retransmited by eNodeB.
Triggering Point
When the RLC layer retransmit a RLC PDU to MAC layer
Refer to .
Update Description
The counter is incremented by 1 when the RLC layer retransmit a RLC PDU to MAC layer.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
16.5.1.3.2 C373454817
Counter Name
Number of RLC PDU Transmission
Short Name
RLCPDU.TransNum
Counter Description
The counter provides the number of RLC PDUs transmited by eNodeB.
Triggering Point
When the RLC layer transmit a RLC PDU to MAC layer
Refer to .
Update Description
The counter is incremented by 1 when the RLC layer transmit a RLC PDU to MAC layer.
16-333
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
16.6 SPS
16.6.1 Flow Charts and Sampling Points
No chart.
16-334
Counter Name
Number of UL SPS Activation Request
Short Name
-
Counter Description
The counter provides the number of UL SPS activation request.
Triggering Point
When the eNodeB sends the UL SPS activation request.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the UL SPS activation request.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.2 C373424677
Counter Name
Number of UL SPS Activation Completed
16-335
Short Name
-
Counter Description
The counter provides the number of UL SPS activation completed.
Triggering Point
When the UL SPS activation completed.
Refer to .
Update Description
The counter is increased by 1 when the UL SPS activation completed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.3 C373424678
Counter Name
Number of UL SPS Reactivation Request
Short Name
-
Counter Description
The counter provides the number of UL SPS reacivation request.
Triggering Point
When the eNodeB sends the UL SPS reactivation request.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the UL SPS reactivation request.
16-336
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.4 C373424679
Counter Name
Number of UL SPS Reactivation Completed
Short Name
-
Counter Description
The counter provides the number of UL SPS reactivation completed.
Triggering Point
When the UL SPS reactivation completed.
Refer to .
Update Description
The counter is increased by 1 when the UL SPS reactivation completed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16-337
16.6.3.5 C373424680
Counter Name
Number of UL SPS Deactivation Request
Short Name
-
Counter Description
The counter provides the number of UL SPS deacivation request.
Triggering Point
When the eNodeB sends the UL SPS deactivation request.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the UL SPS deactivation request.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.6 C373424681
Counter Name
Number of UL SPS Deactivation Completed
Short Name
-
Counter Description
The counter provides the number of UL SPS deactivation completed.
Triggering Point
When the UL SPS deactivation completed.
16-338
Refer to .
Update Description
The counter is increased by 1 when the UL SPS deactivation completed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.7 C373424682
Counter Name
Number of DL SPS Activation Request
Short Name
-
Counter Description
The counter provides the number of DL SPS activation request.
Triggering Point
When the eNodeB sends the DL SPS activation request.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the DL SPS activation request.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16-339
16.6.3.8 C373424683
Counter Name
Number of DL SPS Activation Completed
Short Name
-
Counter Description
The counter provides the number of DL SPS activation completed.
Triggering Point
When the DL SPS activation completed.
Refer to .
Update Description
The counter is increased by 1 when the DL SPS activation completed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.9 C373424684
Counter Name
Number of DL SPS Reactivation Request
Short Name
-
Counter Description
The counter provides the number of DL SPS reacivation request.
Triggering Point
When the eNodeB sends the DL SPS reactivation request.
16-340
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the DL SPS reactivation request.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.10 C373424685
Counter Name
Number of DL SPS Reactivation Completed
Short Name
-
Counter Description
The counter provides the number of DL SPS reactivation completed.
Triggering Point
When the DL SPS reactivation completed.
Refer to .
Update Description
The counter is increased by 1 when the DL SPS reactivation completed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16-341
16.6.3.11 C373424686
Counter Name
Number of DL SPS Deactivation Request
Short Name
-
Counter Description
The counter provides the number of DL SPS deacivation request.
Triggering Point
When the eNodeB sends the DL SPS deactivation request.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the DL SPS deactivation request.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.12 C373424687
Counter Name
Number of DL SPS Deactivation Completed
Short Name
-
Counter Description
The counter provides the number of DL SPS deactivation completed.
Triggering Point
When the DL SPS deactivation completed.
16-342
Refer to .
Update Description
The counter is increased by 1 when the DL SPS deactivation completed.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
16.6.3.13 C373596900
Counter Name
Number of UL QCI1 Initial TBs
Short Name
-
Counter Description
When UE sends datas containing the QCI1 traffic,statistic the initial total scheduling times
Triggering Point
When UE sends datas containing the QCI1 traffic
Refer to .
Update Description
The counter is incremented by 1 when UE sends datas containing the QCI1 traffic
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-343
16.6.3.14 C373596901
Counter Name
Error Number of UL QCI1 Initial TBs
Short Name
-
Counter Description
When UE sends datas containing the QCI1 traffic,and the eNodeB's feedback is
NACK,statistic the initial NACK number
Triggering Point
When UE sends datas containing the QCI1 traffic, and the eNodeB's feedback is NACK
Refer to .
Update Description
The counter is incremented by 1 when UE sends datas containing the QCI1 traffic, and
the eNodeB's feedback is NACK
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.6.3.15 C373596902
Counter Name
Number of DL QCI1 Initial TBs
Short Name
-
Counter Description
When the eNodeB sends datas containing the QCI1 traffic, statistic the initial total
scheduling times
16-344
Triggering Point
When the eNodeBs sends datas containing the QCI1 traffic
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends datas containing the QCI1 traffic
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.6.3.16 C373596903
Counter Name
Error Number of DL QCI1 Initial TBs
Short Name
-
Counter Description
When the eNodeB sends datas containing the QCI1 traffic,and the UE's feedback is NACK,
statistic the initial NACK number
Triggering Point
When the eNodeBs sends datas containing the QCI1 traffic, and the UE's feedback is
NACK
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends datas containing the QCI1 traffic,
and the UE's feedback is NACK
Counter Type
Accumulated value
16-345
Sampling Period
15 min
Unit
unit
16.6.3.17 C373596904
Counter Name
Sum Number of UL QCI1 Initial Subframe Level CCE Used
Short Name
-
Counter Description
When a TTI includes scheduling the UE QCI1 traffic,it needs to count SumCCE and
n.The initial SumCCE value is 0,SumCCE=SumCCE+AveCCE .AveCCE equal to the
total number of CCE actually occupied by TTI scheduling UE contains QCI1 traffic/the
total number of UE contains QCI1 traffic.
Triggering Point
When the eNodeB scheduled UL QCI1 traffic
Refer to .
Update Description
The counter is incremented by AveCCE When the eNodeB scheduled UL QCI1 traffic
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.6.3.18 C373596905
Counter Name
Number of UL QCI1 Scheduled Subframe
16-346
Short Name
-
Counter Description
When a TTI includes scheduling the QCI1 traffic,it needs to count SumCCE and n. The
statistical number n, the initial value is 0, when a TTI scheduling QCI1, n++.
Triggering Point
When the eNodeB scheduled UL QCI1 traffic
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB scheduled UL QCI1 traffic
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.6.3.19 C373596906
Counter Name
Sum Number of DL QCI1 Initial Subframe Level CCE Used
Short Name
-
Counter Description
When a TTI includes scheduling the UE QCI1 traffic,it needs to count SumCCE and n.The
initial SumCCE value is 0, SumCCE=SumCCE+AveCCE .AveCCE equal to the total
number of CCE actually occupied by TTI scheduling UE contains QCI1 traffic/the total
number of UE contains QCI1 traffic.
Triggering Point
When the eNodeB scheduled DL QCI1 traffic
Refer to .
16-347
Update Description
The counter is incremented by AveCCE When the eNodeB scheduled DL QCI1 traffic
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.6.3.20 C373596907
Counter Name
Number of DL QCI1 Scheduled Subframe
Short Name
-
Counter Description
When a TTI includes scheduling the QCI1 traffic,it needs to count SumCCE and n. The
statistical number n, the initial value is 0, when a TTI scheduling QCI1, n++.
Triggering Point
When the eNodeB scheduled DL QCI1 traffic
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB scheduled DL QCI1 traffic
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-348
16-349
Counter Name
Average Bitrate of PDCP SDU in The UL in Control Plane
Short Name
SRB.PdcpSduBitrateUl
Counter Description
At sampling time,the eNodeB collects the UL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
16-350
Triggering Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME
Refer to .
Update Description
The counter is updated by accumulating all the sample UL SRB PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.2 C374574201
Counter Name
Maximum Bitrate of PDCP SDU in The UL in Control Plane
Short Name
SRB.PdcpSduBitrateMaxUl
Counter Description
At sampling time,the eNodeB collects the UL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP SDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
16-351
Sampling Period
1s
Unit
Kbps
16.7.1.3.3 C374574202
Counter Name
Average Bitrate of PDCP SDU in The DL in Control Plane
Short Name
SRB.PdcpSduBitrateDl
Counter Description
At sampling time,the eNodeB collects the DL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB receives the PDCP SDU of signal radio bear from the MME.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL SRB PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.4 C374574203
Counter Name
Maximum Bitrate of PDCP SDU in The DL in Control Plane
16-352
Short Name
SRB.PdcpSduBitrateMaxDl
Counter Description
At sampling time,the eNodeB collects the DL PDCP SDU volume of SRB that is sent by
PDCP layer from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the PDCP SDU of signal radio bear from the MME.
Refer to .
Update Description
The counter is replaced with the current value when the current DL SRB PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.5 C374574204
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=1)
Short Name
DRB.PdcpSduBitrateUl.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW
16-353
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.6 C374574205
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=2)
Short Name
DRB.PdcpSduBitrateUl.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI2 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
16-354
Sampling Period
1s
Unit
Kbps
16.7.1.3.7 C374574206
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=3)
Short Name
DRB.PdcpSduBitrateUl.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.8 C374574207
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=4)
16-355
Short Name
DRB.PdcpSduBitrateUl.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.9 C374574208
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=5)
Short Name
DRB.PdcpSduBitrateUl.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
16-356
Triggering Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.10 C374574209
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=6)
Short Name
DRB.PdcpSduBitrateUl.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI6 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
16-357
Sampling Period
1s
Unit
Kbps
16.7.1.3.11 C374574210
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=7)
Short Name
DRB.PdcpSduBitrateUl.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.12 C374574211
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=8)
16-358
Short Name
DRB.PdcpSduBitrateUl.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.13 C374574212
Counter Name
Average Bitrate of PDCP SDU in The UL (QCI=9)
Short Name
DRB.PdcpSduBitrateUl.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
16-359
Triggering Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.14 C374574213
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=1)
Short Name
DRB.PdcpSduBitrateDl.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI1 PDCP SDU volume, and
then dividing the sum by the measurement period.
16-360
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.15 C374574214
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=2)
Short Name
DRB.PdcpSduBitrateDl.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16-361
16.7.1.3.16 C374574215
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=3)
Short Name
DRB.PdcpSduBitrateDl.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI3 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.17 C374574216
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=4)
Short Name
DRB.PdcpSduBitrateDl.QCI4
16-362
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.18 C374574217
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=5)
Short Name
DRB.PdcpSduBitrateDl.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the other eNodeB.
16-363
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI5 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.19 C374574218
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=6)
Short Name
DRB.PdcpSduBitrateDl.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
16-364
Sampling Period
1s
Unit
Kbps
16.7.1.3.20 C374574219
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=7)
Short Name
DRB.PdcpSduBitrateDl.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI7 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.21 C374574220
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=8)
16-365
Short Name
DRB.PdcpSduBitrateDl.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.22 C374574221
Counter Name
Average Bitrate of PDCP SDU in The DL (QCI=9)
Short Name
DRB.PdcpSduBitrateDl.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have
been deducted. The counter provides the average value of all sampling point in the
measurement period.
16-366
Triggering Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI9 PDCP SDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16.7.1.3.23 C374574222
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=1)
Short Name
DRB.PdcpSduBitrateUlMax.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted.The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-367
Sampling Period
1s
Unit
Kbps
16.7.1.3.24 C374574223
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=2)
Short Name
DRB.PdcpSduBitrateUlMax.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.25 C374574224
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=3)
16-368
Short Name
DRB.PdcpSduBitrateUlMax.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.26 C374574225
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=4)
Short Name
DRB.PdcpSduBitrateUlMax.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
16-369
Triggering Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI4 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.27 C374574226
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=5)
Short Name
DRB.PdcpSduBitrateUlMax.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-370
Sampling Period
1s
Unit
Kbps
16.7.1.3.28 C374574227
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=6)
Short Name
DRB.PdcpSduBitrateUlMax.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.29 C374574228
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=7)
16-371
Short Name
DRB.PdcpSduBitrateUlMax.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.30 C374574229
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=8)
Short Name
DRB.PdcpSduBitrateUlMax.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
16-372
Triggering Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI8 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.31 C374574230
Counter Name
Maximum Bitrate of PDCP SDU in The UL (QCI=9)
Short Name
DRB.PdcpSduBitrateUlMax.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is sent by PDCP
layer from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-373
Sampling Period
1s
Unit
Kbps
16.7.1.3.32 C374574231
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=1)
Short Name
DRB.PdcpSduBitrateDlMax.QCI1
Counter Description
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.33 C374574232
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=2)
16-374
Short Name
DRB.PdcpSduBitrateDlMax.QCI2
Counter Description
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.34 C374574233
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=3)
Short Name
DRB.PdcpSduBitrateDlMax.QCI3
Counter Description
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
16-375
Triggering Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.35 C374574234
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=4)
Short Name
DRB.PdcpSduBitrateDlMax.QCI4
Counter Description
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-376
Sampling Period
1s
Unit
Kbps
16.7.1.3.36 C374574235
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=5)
Short Name
DRB.PdcpSduBitrateDlMax.QCI5
Counter Description
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.37 C374574236
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=6)
16-377
Short Name
DRB.PdcpSduBitrateDlMax.QCI6
Counter Description
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.38 C374574237
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=7)
Short Name
DRB.PdcpSduBitrateDlMax.QCI7
Counter Description
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
16-378
Triggering Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.39 C374574238
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=8)
Short Name
DRB.PdcpSduBitrateDlMax.QCI8
Counter Description
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
16-379
Sampling Period
1s
Unit
Kbps
16.7.1.3.40 C374574239
Counter Name
Maximum Bitrate of PDCP SDU in The DL (QCI=9)
Short Name
DRB.PdcpSduBitrateDlMax.QCI9
Counter Description
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is received by
PDCP layer in DL from the previous sampling time to the current sampling time. PDCP
SDUs that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 PDCP SDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.41 C374574240
Counter Name
Maximum Bitrate of PDCP SDU in The UL in Traffic Plane
16-380
Short Name
DRB.PdcpSduBitrateMaxUl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is sent by PDCP layer
from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP SDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.42 C374574241
Counter Name
Maximum Bitrate of PDCP SDU in The DL in Traffic Plane
Short Name
DRB.PdcpSduBitrateMaxDl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is received by PDCP
layer in DL from the previous sampling time to the current sampling time. PDCP SDUs
that are forwarded over the X2/S1 to another eNodeB during handover have been
deducted.The counter provides the maximum value in the measurement period.
16-381
Triggering Point
When the eNodeB receives the PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL PDCP SDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Kbps
16.7.1.3.43 C374574242
Counter Name
Average Bitrate of PDCP SDU in The UL in Traffic Plane
Short Name
DRB.PdcpSduBitrateAvgUl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is sent by PDCP layer
from the previous sampling time to the current sampling time. PDCP SDUs that are
forwarded over the X2/S1 to another eNodeB during handover have been deducted. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW
Refer to .
Update Description
The counter is updated by accumulating all the sample UL PDCP SDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
16-382
Sampling Period
1s
Unit
Kbps
16.7.1.3.44 C374574243
Counter Name
Average Bitrate of PDCP SDU in The DL in Traffic Plane
Short Name
DRB.PdcpSduBitrateAvgDl
Counter Description
At sampling time,the eNodeB collects the PDCP SDU volume that is received by PDCP
layer in DL from the previous sampling time to the current sampling time. PDCP SDUs that
are forwarded over the X2/S1 to another eNodeB during handover have been deducted.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB receives the PDCP SDU from the SGW or the other eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL PDCP SDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
16-383
16-384
16-385
16.7.2.3.1 C374543600
Counter Name
Maximum Cell DL PDCP Throughput
Short Name
Drb.PdcpThrouDlMax
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's
and SRB's and is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer
16-386
Refer to .
Update Description
The counter is replaced with the current value when the current DL PDCP PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.2 C374543601
Counter Name
Minimum Cell DL PDCP Throughput
Short Name
Drb.PdcpThrouDlMin
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's
and SRB's and is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL PDCP PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
16-387
Sampling Period
1s
Unit
Mbps
16.7.2.3.3 C374543602
Counter Name
Average Cell DL PDCP Throughput
Short Name
Drb.PdcpThrouDlAvg
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's
and SRB's and is sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the average value of all sampling point in the
measurement period.
Triggering Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL PDCP PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.4 C374543603
Counter Name
Maximum Cell UL PDCP Throughput
16-388
Short Name
Drb.PdcpThrouUlMax
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's and
SRB's and is received by PDCP layer from RLC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.5 C374543604
Counter Name
Minimum Cell UL PDCP Throughput
Short Name
Drb.PdcpThrouUlMin
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's and
SRB's and is received by PDCP layer from RLC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
16-389
Triggering Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL PDCP PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.6 C374543605
Counter Name
Average Cell UL PDCP Throughput
Short Name
Drb.PdcpThrouUlAvg
Counter Description
At sampling time, the eNodeB collects the PDCP PDU volume that includes the DRB's and
SRB's and is received by PDCP layer from RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL PDCP PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
16-390
Sampling Period
1s
Unit
Mbps
16.7.2.3.7 C374543606
Counter Name
Maximum Cell DL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouDlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.8 C374543607
Counter Name
Minimum Cell DL PDCP Throughput(QCI=1)
16-391
Short Name
Drb.PdcpThrouDlMin.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.9 C374543608
Counter Name
Average Cell DL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouDlAvg.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB RLC layer
Refer to .
16-392
Update Description
The counter is updated by accumulating all the sample DL QCI1 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.10 C374543609
Counter Name
Maximum Cell UL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouUlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-393
Unit
Mbps
16.7.2.3.11 C374543610
Counter Name
Minimum Cell UL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouUlMin.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.12 C374543611
Counter Name
Average Cell UL PDCP Throughput(QCI=1)
Short Name
Drb.PdcpThrouUlAvg.QCI1
16-394
Counter Description
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.13 C374543612
Counter Name
Maximum Cell DL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouDlMax.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB RLC layer
Refer to .
16-395
Update Description
The counter is replaced with the current value when the current DL QCI2 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.14 C374543613
Counter Name
Minimum Cell DL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouDlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-396
Unit
Mbps
16.7.2.3.15 C374543614
Counter Name
Average Cell DL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouDlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.16 C374543615
Counter Name
Maximum Cell UL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouUlMax.QCI2
16-397
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.17 C374543616
Counter Name
Minimum Cell UL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouUlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the eNodeB RLC layer
Refer to .
16-398
Update Description
The counter is replaced with the current value when the current UL QCI2 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.18 C374543617
Counter Name
Average Cell UL PDCP Throughput(QCI=2)
Short Name
Drb.PdcpThrouUlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI2 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-399
Unit
Mbps
16.7.2.3.19 C374543618
Counter Name
Maximum Cell DL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouDlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.20 C374543619
Counter Name
Minimum Cell DL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouDlMin.QCI3
16-400
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.21 C374543620
Counter Name
Average Cell DL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouDlAvg.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB RLC layer
Refer to .
16-401
Update Description
The counter is updated by accumulating all the sample DL QCI3 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.22 C374543621
Counter Name
Maximum Cell UL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouUlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-402
Unit
Mbps
16.7.2.3.23 C374543622
Counter Name
Minimum Cell UL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouUlMin.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.24 C374543623
Counter Name
Average Cell UL PDCP Throughput(QCI=3)
Short Name
Drb.PdcpThrouUlAvg.QCI3
16-403
Counter Description
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.25 C374543624
Counter Name
Maximum Cell DL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouDlMax.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB RLC layer
Refer to .
16-404
Update Description
The counter is replaced with the current value when the current DL QCI4 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.26 C374543625
Counter Name
Minimum Cell DL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouDlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-405
Unit
Mbps
16.7.2.3.27 C374543626
Counter Name
Average Cell DL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouDlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.28 C374543627
Counter Name
Maximum Cell UL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouUlMax.QCI4
16-406
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI4 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.29 C374543628
Counter Name
Minimum Cell UL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouUlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the eNodeB RLC layer
Refer to .
16-407
Update Description
The counter is replaced with the current value when the current UL QCI4 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.30 C374543629
Counter Name
Average Cell UL PDCP Throughput(QCI=4)
Short Name
Drb.PdcpThrouUlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-408
Unit
Mbps
16.7.2.3.31 C374543630
Counter Name
Maximum Cell DL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouDlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.32 C374543631
Counter Name
Minimum Cell DL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouDlMin.QCI5
16-409
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.33 C374543632
Counter Name
Average Cell DL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouDlAvg.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB RLC layer
Refer to .
16-410
Update Description
The counter is updated by accumulating all the sample DL QCI5 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.34 C374543633
Counter Name
Maximum Cell UL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouUlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-411
Unit
Mbps
16.7.2.3.35 C374543634
Counter Name
Minimum Cell UL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouUlMin.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.36 C374543635
Counter Name
Average Cell UL PDCP Throughput(QCI=5)
Short Name
Drb.PdcpThrouUlAvg.QCI5
16-412
Counter Description
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.37 C374543636
Counter Name
Maximum Cell DL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouDlMax.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB RLC layer
Refer to .
16-413
Update Description
The counter is replaced with the current value when the current DL QCI6 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.38 C374543637
Counter Name
Minimum Cell DL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouDlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-414
Unit
Mbps
16.7.2.3.39 C374543638
Counter Name
Average Cell DL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouDlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.40 C374543639
Counter Name
Maximum Cell UL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouUlMax.QCI6
16-415
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.41 C374543640
Counter Name
Minimum Cell UL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouUlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the eNodeB RLC layer
Refer to .
16-416
Update Description
The counter is replaced with the current value when the current UL QCI6 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.42 C374543641
Counter Name
Average Cell UL PDCP Throughput(QCI=6)
Short Name
Drb.PdcpThrouUlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI6 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-417
Unit
Mbps
16.7.2.3.43 C374543642
Counter Name
Maximum Cell DL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouDlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.44 C374543643
Counter Name
Minimum Cell DL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouDlMin.QCI7
16-418
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.45 C374543644
Counter Name
Average Cell DL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouDlAvg.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB RLC layer
Refer to .
16-419
Update Description
The counter is updated by accumulating all the sample DL QCI7 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.46 C374543645
Counter Name
Maximum Cell UL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouUlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-420
Unit
Mbps
16.7.2.3.47 C374543646
Counter Name
Minimum Cell UL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouUlMin.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.48 C374543647
Counter Name
Average Cell UL PDCP Throughput(QCI=7)
Short Name
Drb.PdcpThrouUlAvg.QCI7
16-421
Counter Description
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.49 C374543648
Counter Name
Maximum Cell DL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouDlMax.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB RLC layer
Refer to .
16-422
Update Description
The counter is replaced with the current value when the current DL QCI8 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.50 C374543649
Counter Name
Minimum Cell DL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouDlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-423
Unit
Mbps
16.7.2.3.51 C374543650
Counter Name
Average Cell DL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouDlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.52 C374543651
Counter Name
Maximum Cell UL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouUlMax.QCI8
16-424
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI8 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.53 C374543652
Counter Name
Minimum Cell UL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouUlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the eNodeB RLC layer
Refer to .
16-425
Update Description
The counter is replaced with the current value when the current UL QCI8 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.54 C374543653
Counter Name
Average Cell UL PDCP Throughput(QCI=8)
Short Name
Drb.PdcpThrouUlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-426
Unit
Mbps
16.7.2.3.55 C374543654
Counter Name
Maximum Cell DL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouDlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.56 C374543655
Counter Name
Minimum Cell DL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouDlMin.QCI9
16-427
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.57 C374543656
Counter Name
Average Cell DL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouDlAvg.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is sent by PDCP
layer to RLC layer from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB RLC layer
Refer to .
16-428
Update Description
The counter is updated by accumulating all the sample DL QCI9 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.2.3.58 C374543657
Counter Name
Maximum Cell UL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouUlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 PDCP PDU
volume is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-429
Unit
Mbps
16.7.2.3.59 C374543658
Counter Name
Minimum Cell UL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouUlMin.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the minimum value in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 PDCP PDU
volume is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.2.3.60 C374543659
Counter Name
Average Cell UL PDCP Throughput(QCI=9)
Short Name
Drb.PdcpThrouUlAvg.QCI9
16-430
Counter Description
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is received by
PDCP layer from RLC layer from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the eNodeB RLC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 PDCP PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16-431
16-432
16-433
16.7.3.3.1 C374543660
Counter Name
Maximum Cell DL RLC Throughput
Short Name
Drb.RlcThrouDlMax
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU. The counter provides
the maximum value in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer
Refer to .
16-434
Update Description
The counter is replaced with the current value when the current DL RLC PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.2 C374543661
Counter Name
Minimum Cell DL RLC Throughput
Short Name
Drb.RlcThrouDlMin
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU.The counter provides
the minimum value in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL RLC PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-435
Unit
Mbps
16.7.3.3.3 C374543662
Counter Name
Average Cell DL RLC Throughput
Short Name
Drb.RlcThrouDlAvg
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL RLC PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.4 C374543663
Counter Name
Maximum Cell UL RLC Throughput
Short Name
Drb.RlcThrouUlMax
16-436
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is received by RLC layer from MAC layer from the previous sampling time
to the current sampling time. The volume includes retransmission's PDU. The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL RLC PDU volume is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.5 C374543664
Counter Name
Minimum Cell UL RLC Throughput
Short Name
Drb.RlcThrouUlMin
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is received by RLC layer from MAC layer from the previous sampling time
to the current sampling time. The volume includes retransmission's PDU. The counter
provides the minimum value in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC layer
Refer to .
16-437
Update Description
The counter is replaced with the current value when the current UL RLC PDU volume is
smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.6 C374543665
Counter Name
Average Cell UL RLC Throughput
Short Name
Drb.RlcThrouUlAvg
Counter Description
At sampling time, the eNodeB collects the RLC PDU volume that includes the DRB's
,SRB's and is received by RLC layer from MAC layer from the previous sampling time
to the current sampling time. The volume includes retransmission's PDU. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL RLC PDU volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-438
Unit
Mbps
16.7.3.3.7 C374543666
Counter Name
Maximum Cell DL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouDlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that is sent by RLC
layer to MAC layer from the previous sampling time to the current sampling time.The
volume includes retransmission's PDU. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.8 C374543667
Counter Name
Minimum Cell DL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouDlMin.QCI1
16-439
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.9 C374543668
Counter Name
Average Cell DL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouDlAvg.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB MAC layer
Refer to .
16-440
Update Description
The counter is updated by accumulating all the sample DL QCI1 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.10 C374543669
Counter Name
Maximum Cell UL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouUlMax.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-441
Unit
Mbps
16.7.3.3.11 C374543670
Counter Name
Minimum Cell UL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouUlMin.QCI1
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.12 C374543671
Counter Name
Average Cell UL RLC Throughput(QCI=1)
Short Name
Drb.RlcThrouUlAvg.QCI1
16-442
Counter Description
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.13 C374543672
Counter Name
Maximum Cell DL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouDlMax.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB MAC layer
Refer to .
16-443
Update Description
The counter is replaced with the current value when the current DL QCI2 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.14 C374543673
Counter Name
Minimum Cell DL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouDlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-444
Unit
Mbps
16.7.3.3.15 C374543674
Counter Name
Average Cell DL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouDlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.16 C374543675
Counter Name
Maximum Cell UL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouUlMax.QCI2
16-445
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.17 C374543676
Counter Name
Minimum Cell UL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouUlMin.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the eNodeB MAC layer
Refer to .
16-446
Update Description
The counter is replaced with the current value when the current UL QCI2 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.18 C374543677
Counter Name
Average Cell UL RLC Throughput(QCI=2)
Short Name
Drb.RlcThrouUlAvg.QCI2
Counter Description
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI2 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-447
Unit
Mbps
16.7.3.3.19 C374543678
Counter Name
Maximum Cell DL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouDlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.20 C374543679
Counter Name
Minimum Cell DL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouDlMin.QCI3
16-448
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI3 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.21 C374543680
Counter Name
Average Cell DL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouDlAvg.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB MAC layer
Refer to .
16-449
Update Description
The counter is updated by accumulating all the sample DL QCI3 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.22 C374543681
Counter Name
Maximum Cell UL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouUlMax.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-450
Unit
Mbps
16.7.3.3.23 C374543682
Counter Name
Minimum Cell UL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouUlMin.QCI3
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.24 C374543683
Counter Name
Average Cell UL RLC Throughput(QCI=3)
Short Name
Drb.RlcThrouUlAvg.QCI3
16-451
Counter Description
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.25 C374543684
Counter Name
Maximum Cell DL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouDlMax.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB MAC layer
Refer to .
16-452
Update Description
The counter is replaced with the current value when the current DL QCI4 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.26 C374543685
Counter Name
Minimum Cell DL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouDlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-453
Unit
Mbps
16.7.3.3.27 C374543686
Counter Name
Average Cell DL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouDlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.28 C374543687
Counter Name
Maximum Cell UL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouUlMax.QCI4
16-454
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI4 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.29 C374543688
Counter Name
Minimum Cell UL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouUlMin.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the eNodeB MAC layer
Refer to .
16-455
Update Description
The counter is replaced with the current value when the current UL QCI4 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.30 C374543689
Counter Name
Average Cell UL RLC Throughput(QCI=4)
Short Name
Drb.RlcThrouUlAvg.QCI4
Counter Description
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-456
Unit
Mbps
16.7.3.3.31 C374543690
Counter Name
Maximum Cell DL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouDlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.32 C374543691
Counter Name
Minimum Cell DL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouDlMin.QCI5
16-457
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.33 C374543692
Counter Name
Average Cell DL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouDlAvg.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB MAC layer
Refer to .
16-458
Update Description
The counter is updated by accumulating all the sample DL QCI5 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.34 C374543693
Counter Name
Maximum Cell UL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouUlMax.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-459
Unit
Mbps
16.7.3.3.35 C374543694
Counter Name
Minimum Cell UL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouUlMin.QCI5
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.36 C374543695
Counter Name
Average Cell UL RLC Throughput(QCI=5)
Short Name
Drb.RlcThrouUlAvg.QCI5
16-460
Counter Description
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.37 C374543696
Counter Name
Maximum Cell DL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouDlMax.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB MAC layer
Refer to .
16-461
Update Description
The counter is replaced with the current value when the current DL QCI6 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.38 C374543697
Counter Name
Minimum Cell DL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouDlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-462
Unit
Mbps
16.7.3.3.39 C374543698
Counter Name
Average Cell DL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouDlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.40 C374543699
Counter Name
Maximum Cell UL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouUlMax.QCI6
16-463
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.41 C374543700
Counter Name
Minimum Cell UL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouUlMin.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the eNodeB MAC layer
Refer to .
16-464
Update Description
The counter is replaced with the current value when the current UL QCI6 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.42 C374543701
Counter Name
Average Cell UL RLC Throughput(QCI=6)
Short Name
Drb.RlcThrouUlAvg.QCI6
Counter Description
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI6 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-465
Unit
Mbps
16.7.3.3.43 C374543702
Counter Name
Maximum Cell DL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouDlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.44 C374543703
Counter Name
Minimum Cell DL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouDlMin.QCI7
16-466
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI7 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.45 C374543704
Counter Name
Average Cell DL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouDlAvg.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB MAC layer
Refer to .
16-467
Update Description
The counter is updated by accumulating all the sample DL QCI7 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.46 C374543705
Counter Name
Maximum Cell UL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouUlMax.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-468
Unit
Mbps
16.7.3.3.47 C374543706
Counter Name
Minimum Cell UL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouUlMin.QCI7
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.48 C374543707
Counter Name
Average Cell UL RLC Throughput(QCI=7)
Short Name
Drb.RlcThrouUlAvg.QCI7
16-469
Counter Description
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.49 C374543708
Counter Name
Maximum Cell DL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouDlMax.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB MAC layer
Refer to .
16-470
Update Description
The counter is replaced with the current value when the current DL QCI8 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.50 C374543709
Counter Name
Minimum Cell DL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouDlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
16-471
Unit
Mbps
16.7.3.3.51 C374543710
Counter Name
Average Cell DL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouDlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time. The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.52 C374543711
Counter Name
Maximum Cell UL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouUlMax.QCI8
16-472
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI8 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.53 C374543712
Counter Name
Minimum Cell UL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouUlMin.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the eNodeB MAC layer
Refer to .
16-473
Update Description
The counter is replaced with the current value when the current UL QCI8 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.54 C374543713
Counter Name
Average Cell UL RLC Throughput(QCI=8)
Short Name
Drb.RlcThrouUlAvg.QCI8
Counter Description
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
16-474
Unit
Mbps
16.7.3.3.55 C374543714
Counter Name
Maximum Cell DL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouDlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the maximum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.56 C374543715
Counter Name
Minimum Cell DL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouDlMin.QCI9
16-475
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time to
the current sampling time. The counter provides the minimum value in the measurement
period.
Triggering Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.57 C374543716
Counter Name
Average Cell DL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouDlAvg.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is sent by RLC layer to MAC layer from the previous sampling time
to the current sampling time.The volume includes retransmission's PDU. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB MAC layer
Refer to .
16-476
Update Description
The counter is updated by accumulating all the sample DL QCI9 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16.7.3.3.58 C374543717
Counter Name
Maximum Cell UL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouUlMax.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the maximum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 RLC PDU volume
is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1s
16-477
Unit
Mbps
16.7.3.3.59 C374543718
Counter Name
Minimum Cell UL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouUlMin.QCI9
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the minimum value in the
measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 RLC PDU volume
is smaller than the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1s
Unit
Mbps
16.7.3.3.60 C374543719
Counter Name
Average Cell UL RLC Throughput(QCI=9)
Short Name
Drb.RlcThrouUlAvg.QCI9
16-478
Counter Description
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that includes the
retransmission's and is received by RLC layer from MAC layer from the previous sampling
time to the current sampling time. The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the eNodeB MAC layer
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 RLC PDU volume, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Mbps
16-479
16.8.1.3.1 C374564109
Counter Name
DL QCI1 IP Packet Delay
Short Name
DRB.IpLateDl.QCI1
Counter Description
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI1 PDCP SDU over the air.
16-480
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.2 C374564110
Counter Name
DL QCI2 IP Packet Delay
Short Name
DRB.IpLateDl.QCI2
Counter Description
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI2 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-481
16.8.1.3.3 C374564111
Counter Name
DL QCI3 IP Packet Delay
Short Name
DRB.IpLateDl.QCI3
Counter Description
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI3 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.4 C374564112
Counter Name
DL QCI4 IP Packet Delay
Short Name
DRB.IpLateDl.QCI4
16-482
Counter Description
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI4 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.5 C374564113
Counter Name
DL QCI5 IP Packet Delay
Short Name
DRB.IpLateDl.QCI5
Counter Description
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
16-483
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI5 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.6 C374564114
Counter Name
DL QCI6 IP Packet Delay
Short Name
DRB.IpLateDl.QCI6
Counter Description
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI6 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-484
Unit
ms
16.8.1.3.7 C374564115
Counter Name
DL QCI7 IP Packet Delay
Short Name
DRB.IpLateDl.QCI7
Counter Description
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI7 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.8 C374564116
Counter Name
DL QCI8 IP Packet Delay
Short Name
DRB.IpLateDl.QCI8
16-485
Counter Description
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI8 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.9 C374564117
Counter Name
DL QCI9 IP Packet Delay
Short Name
DRB.IpLateDl.QCI9
Counter Description
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When
the first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU, and than records
the end time at sending the first part of the PDCP SDU over the air.
Refer to .
16-486
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
QCI9 PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.1.3.10 C374564119
Counter Name
DL IP Packet Delay
Short Name
DRB.IpLateDl
Counter Description
When a PDCP SDU arrives the eNodeB PDCP layer, it is the start point in time.When the
first piece of PDCP SDU was was sent to air interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the PDCP SDU, and than records the end
time at sending the first part of the PDCP SDU over the air.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB sends the first part of the
PDCP SDU over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-487
Unit
ms
Counter Name
DL QCI1 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI1
Counter Description
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
16-488
Triggering Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI1 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.2 C374564101
Counter Name
DL QCI2 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI2
Counter Description
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI2 PDCP SDU.
16-489
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.3 C374564102
Counter Name
DL QCI3 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI3
Counter Description
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI3 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-490
16.8.2.3.4 C374564103
Counter Name
DL QCI4 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI4
Counter Description
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI4 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.5 C374564104
Counter Name
DL QCI5 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI5
16-491
Counter Description
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI5 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.6 C374564105
Counter Name
DL QCI6 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI6
Counter Description
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
16-492
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI6 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.7 C374564106
Counter Name
DL QCI7 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI7
Counter Description
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI7 PDCP SDU.
Counter Type
Accumulated value
16-493
Sampling Period
15 min
Unit
ms
16.8.2.3.8 C374564107
Counter Name
DL QCI8 PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl.QCI8
Counter Description
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI8 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.9 C374564108
Counter Name
DL QCI9 PDCP SDU Delay
16-494
Short Name
DRB.PdcpSduDelayDl.QCI9
Counter Description
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When
the last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Triggering Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU, and than records
the end time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the QCI9 PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16.8.2.3.10 C374564118
Counter Name
DL PDCP SDU Delay
Short Name
DRB.PdcpSduDelayDl
Counter Description
When a PDCP SDU arrives the eNodeB PDCP layer,it is the start point in time.When the
last piece of PDCP SDU was received by the UE according to received HARQ feedback
information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
16-495
Triggering Point
The eNodeB records the start time at receiving the PDCP SDU, and than records the end
time at getting the all positive HARQ acknowledgment for the PDCP SDU.
Refer to .
Update Description
The counter is increased by the sample value when the eNodeB gets the all positive HARQ
acknowledgment for the PDCP SDU.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
ms
16-496
Counter Name
UL PDCP SDU Loss Number,QCI=1
Short Name
DRB.PdcpSduLossUl.QCI1
Counter Description
When the eNodeB PDCP layer receives the QCI1 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI1 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI1 UL PDCP SDU sequece number discontinuity.
16-497
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.2 C374553901
Counter Name
UL PDCP SDU Loss Number,QCI=2
Short Name
DRB.PdcpSduLossUl.QCI2
Counter Description
When the eNodeB PDCP layer receives the QCI2 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI2 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI2 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-498
16.9.1.3.3 C374553902
Counter Name
UL PDCP SDU Loss Number ,QCI=3
Short Name
DRB.PdcpSduLossUl.QCI3
Counter Description
When the eNodeB PDCP layer receives the QCI3 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI3 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI3 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.4 C374553903
Counter Name
UL PDCP SDU Loss Number ,QCI=4
Short Name
DRB.PdcpSduLossUl.QCI4
16-499
Counter Description
When the eNodeB PDCP layer receives the QCI4 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI4 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI4 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.5 C374553904
Counter Name
UL PDCP SDU Loss Number ,QCI=5
Short Name
DRB.PdcpSduLossUl.QCI5
Counter Description
When the eNodeB PDCP layer receives the QCI5 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI5 PDCP SDU sequece number discontinuity in UL.
16-500
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI5 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.6 C374553905
Counter Name
UL PDCP SDU Loss Number ,QCI=6
Short Name
DRB.PdcpSduLossUl.QCI6
Counter Description
When the eNodeB PDCP layer receives the QCI6 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI6 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI6 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
16-501
Sampling Period
15 min
Unit
unit
16.9.1.3.7 C374553906
Counter Name
UL PDCP SDU Loss Number ,QCI=7
Short Name
DRB.PdcpSduLossUl.QCI7
Counter Description
When the eNodeB PDCP layer receives the QCI7 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI7 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI7 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.8 C374553907
Counter Name
UL PDCP SDU Loss Number ,QCI=8
16-502
Short Name
DRB.PdcpSduLossUl.QCI8
Counter Description
When the eNodeB PDCP layer receives the QCI8 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the QCI8 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI8 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.9 C374553908
Counter Name
UL PDCP SDU Loss Number ,QCI=9
Short Name
DRB.PdcpSduLossUl.QCI9
Counter Description
When the eNodeB PDCP layer receives the QCI9 PDCP PDU from the RLC layer, compare
the received PDU sequence number with the expected sequence number. If the received
is larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
16-503
Triggering Point
When the eNodeB detects the QCI9 PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the QCI9 UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.10 C374553909
Counter Name
DL PDCP SDU Loss Number ,QCI=1
Short Name
DRB.PdcpSduAirLossDl.QCI1
Counter Description
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
16-504
Sampling Period
15 min
Unit
unit
16.9.1.3.11 C374553910
Counter Name
DL PDCP SDU Loss Number ,QCI=2
Short Name
DRB.PdcpSduAirLossDl.QCI2
Counter Description
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.12 C374553911
Counter Name
DL PDCP SDU Loss Number ,QCI=3
16-505
Short Name
DRB.PdcpSduAirLossDl.QCI3
Counter Description
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.13 C374553912
Counter Name
DL PDCP SDU Loss Number ,QCI=4
Short Name
DRB.PdcpSduAirLossDl.QCI4
Counter Description
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
16-506
Triggering Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.14 C374553913
Counter Name
DL PDCP SDU Loss Number ,QCI=5
Short Name
DRB.PdcpSduAirLossDl.QCI5
Counter Description
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
16-507
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.15 C374553914
Counter Name
DL PDCP SDU Loss Number ,QCI=6
Short Name
DRB.PdcpSduAirLossDl.QCI6
Counter Description
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-508
16.9.1.3.16 C374553915
Counter Name
DL PDCP SDU Loss Number ,QCI=7
Short Name
DRB.PdcpSduAirLossDl.QCI7
Counter Description
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.17 C374553916
Counter Name
DL PDCP SDU Loss Number ,QCI=8
Short Name
DRB.PdcpSduAirLossDl.QCI8
16-509
Counter Description
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.18 C374553917
Counter Name
DL PDCP SDU Loss Number ,QCI=9
Short Name
DRB.PdcpSduAirLossDl.QCI9
Counter Description
the eNodeB discards the QCI9 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If at least a part of it has been transmitted over the air
but not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
16-510
Update Description
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP SDU in DL, for
which at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.1.3.19 C374553956
Counter Name
UL PDCP SDU Loss Number
Short Name
DRB.PdcpSduLossUl
Counter Description
When the eNodeB PDCP layer receives the PDCP PDU from the RLC layer, compare the
received PDU sequence number with the expected sequence number. If the received is
larger than the expected, it is considered that there is packet loss in UL. The number of
the lost SDU is the difference between the received sequence number and the expected
sequence number.
Triggering Point
When the eNodeB detects the PDCP SDU sequece number discontinuity in UL.
Refer to .
Update Description
The counter is increased by the number of missing UL PDCP sequence numbers when
the eNodeB detects the UL PDCP SDU sequece number discontinuity.
Counter Type
Accumulated value
Sampling Period
15 min
16-511
Unit
unit
16.9.1.3.20 C374553957
Counter Name
DL PDCP SDU Loss Number
Short Name
DRB.PdcpSduAirLossDl
Counter Description
the eNodeB discards the PDCP SDU when timeout of "timer discard" detecting the SDU
or not DL buffer for the SDU. If at least a part of it has been transmitted over the air but
not positively acknowledged, the counter is counted.
Triggering Point
When the eNodeB discards the PDCP SDU in DL, for which at least a part has been
transmitted over the air but not positively acknowledged.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the PDCP SDU in DL, for which
at least a part has been transmitted over the air but not positively acknowledged.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-512
16.9.2.3.1 C374553918
Counter Name
DL PDCP SDU Discard Number ,QCI=1
Short Name
DRB.PdcpSduAirDropDl.QCI1
Counter Description
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP SDU in DL, for
which no part has been transmitted over the air.
16-513
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.2 C374553919
Counter Name
DL PDCP SDU Discard Number ,QCI=2
Short Name
DRB.PdcpSduAirDropDl.QCI2
Counter Description
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-514
16.9.2.3.3 C374553920
Counter Name
DL PDCP SDU Discard Number ,QCI=3
Short Name
DRB.PdcpSduAirDropDl.QCI3
Counter Description
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.4 C374553921
Counter Name
DL PDCP SDU Discard Number ,QCI=4
Short Name
DRB.PdcpSduAirDropDl.QCI4
16-515
Counter Description
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.5 C374553922
Counter Name
DL PDCP SDU Discard Number ,QCI=5
Short Name
DRB.PdcpSduAirDropDl.QCI5
Counter Description
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
16-516
Update Description
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.6 C374553923
Counter Name
DL PDCP SDU Discard Number ,QCI=6
Short Name
DRB.PdcpSduAirDropDl.QCI6
Counter Description
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-517
Unit
unit
16.9.2.3.7 C374553924
Counter Name
DL PDCP SDU Discard Number ,QCI=7
Short Name
DRB.PdcpSduAirDropDl.QCI7
Counter Description
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.8 C374553925
Counter Name
DL PDCP SDU Discard Number ,QCI=8
Short Name
DRB.PdcpSduAirDropDl.QCI8
16-518
Counter Description
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard" detecting the
SDU or not DL buffer for the SDU. If no part of it has been transmitted over the air, the
counter is counted.
Triggering Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.9 C374553926
Counter Name
DL PDCP SDU Discard Number ,QCI=9
Short Name
DRB.PdcpSduAirDropDl.QCI9
Counter Description
the eNodeB will discard the QCI9 PDCP SDU and no part of which has been transmitted
over the air when "timer discard" timer of detecting the SDU expires or there is no DL buffer
for the SDU. The counter is used to count the number of the SDU.
Triggering Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which no part has been
transmitted over the air
Refer to .
16-519
Update Description
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP SDU in DL, for
which no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.2.3.10 C374553958
Counter Name
DL PDCP SDU Discard Number
Short Name
DRB.PdcpSduAirDropDl
Counter Description
the eNodeB discards the PDCP SDU when timeout of "timer discard" detecting the SDU
or not DL buffer for the SDU. If no part of it has been transmitted over the air, the counter
is counted.
Triggering Point
When the eNodeB discards the PDCP SDU in DL, for which no part has been transmitted
over the air
Refer to .
Update Description
The counter is increased by 1 when the eNodeB discards the PDCP SDU in DL, for which
no part has been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-520
Unit
unit
16-521
16.9.3.3.1 C374553927
Counter Name
UL PDCP SDU Number ,QCI=1
Short Name
DRB.PdcpSduUl.QCI1
Counter Description
After the PDCP layer receives the QCI1 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI1 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI1 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
16-522
Unit
unit
16.9.3.3.2 C374553928
Counter Name
UL PDCP SDU Number ,QCI=2
Short Name
DRB.PdcpSduUl.QCI2
Counter Description
After the PDCP layer receives the QCI2 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI2 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI2 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.3 C374553929
Counter Name
UL PDCP SDU Number ,QCI=3
Short Name
DRB.PdcpSduUl.QCI3
16-523
Counter Description
After the PDCP layer receives the QCI3 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI3 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI3 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.4 C374553930
Counter Name
UL PDCP SDU Number ,QCI=4
Short Name
DRB.PdcpSduUl.QCI4
Counter Description
After the PDCP layer receives the QCI4 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI4 PDCP packet in the uplink
Refer to .
16-524
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI4 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.5 C374553931
Counter Name
UL PDCP SDU Number ,QCI=5
Short Name
DRB.PdcpSduUl.QCI5
Counter Description
After the PDCP layer receives the QCI5 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI5 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI5 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
16-525
Unit
unit
16.9.3.3.6 C374553932
Counter Name
UL PDCP SDU Number ,QCI=6
Short Name
DRB.PdcpSduUl.QCI6
Counter Description
After the PDCP layer receives the QCI6 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI6 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI6 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.7 C374553933
Counter Name
UL PDCP SDU Number ,QCI=7
Short Name
DRB.PdcpSduUl.QCI7
16-526
Counter Description
After the PDCP layer receives the QCI7 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI7 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI7 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.8 C374553934
Counter Name
UL PDCP SDU Number ,QCI=8
Short Name
DRB.PdcpSduUl.QCI8
Counter Description
After the PDCP layer receives the QCI8 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI8 PDCP packet in the uplink
Refer to .
16-527
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI8 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.9 C374553935
Counter Name
UL PDCP SDU Number ,QCI=9
Short Name
DRB.PdcpSduUl.QCI9
Counter Description
After the PDCP layer receives the QCI9 PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the QCI9 PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the QCI9 PDCP packet
in the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
16-528
Unit
unit
16.9.3.3.10 C374553936
Counter Name
DL PDCP SDU Number ,QCI=1
Short Name
DRB.PdcpSduDl.QCI1
Counter Description
When the eNodeB PDCP layer receives the QCI1 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI1 PDCP SDU.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI1 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.11 C374553937
Counter Name
DL PDCP SDU Number ,QCI=2
Short Name
DRB.PdcpSduDl.QCI2
16-529
Counter Description
When the eNodeB PDCP layer receives the QCI2 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI2 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI2 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.12 C374553938
Counter Name
DL PDCP SDU Number ,QCI=3
Short Name
DRB.PdcpSduDl.QCI3
Counter Description
When the eNodeB PDCP layer receives the QCI3 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI3 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI3 PDCP
SDU from the SGW or the other eNodeB.
16-530
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.13 C374553939
Counter Name
DL PDCP SDU Number ,QCI=4
Short Name
DRB.PdcpSduDl.QCI4
Counter Description
When the eNodeB PDCP layer receives the QCI4 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI4 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI4 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.14 C374553940
Counter Name
DL PDCP SDU Number ,QCI=5
16-531
Short Name
DRB.PdcpSduDl.QCI5
Counter Description
When the eNodeB PDCP layer receives the QCI5 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI5 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI5 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.15 C374553941
Counter Name
DL PDCP SDU Number ,QCI=6
Short Name
DRB.PdcpSduDl.QCI6
Counter Description
When the eNodeB PDCP layer receives the QCI6 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI6 PDCP SDU
Refer to .
16-532
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI6 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.16 C374553942
Counter Name
DL PDCP SDU Number ,QCI=7
Short Name
DRB.PdcpSduDl.QCI7
Counter Description
When the eNodeB PDCP layer receives the QCI7 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI7 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI7 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-533
16.9.3.3.17 C374553943
Counter Name
DL PDCP SDU Number ,QCI=8
Short Name
DRB.PdcpSduDl.QCI8
Counter Description
When the eNodeB PDCP layer receives the QCI8 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the QCI8 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI8 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.18 C374553944
Counter Name
DL PDCP SDU Number ,QCI=9
Short Name
DRB.PdcpSduDl.QCI9
Counter Description
When the eNodeB PDCP layer receives the QCI9 PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
16-534
Triggering Point
When the eNodeB PDCP layer receives the QCI9 PDCP SDU
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the QCI9 PDCP
SDU from the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.19 C374553947
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=1
Short Name
DRB.PdcpSduHarqDl.QCI1
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI1 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI1 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
16-535
Sampling Period
15 min
Unit
unit
16.9.3.3.20 C374553948
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=2
Short Name
DRB.PdcpSduHarqDl.QCI2
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI2 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI2 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.21 C374553949
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=3
16-536
Short Name
DRB.PdcpSduHarqDl.QCI3
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI3 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI3 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.22 C374553950
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=4
Short Name
DRB.PdcpSduHarqDl.QCI4
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI4 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
16-537
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI4 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.23 C374553951
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=5
Short Name
DRB.PdcpSduHarqDl.QCI5
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI5 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI5 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-538
Unit
unit
16.9.3.3.24 C374553952
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=6
Short Name
DRB.PdcpSduHarqDl.QCI6
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI6 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI6 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.25 C374553953
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=7
Short Name
DRB.PdcpSduHarqDl.QCI7
16-539
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI7 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI7 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.26 C374553954
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=8
Short Name
DRB.PdcpSduHarqDl.QCI8
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI8 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
16-540
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI8 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.27 C374553955
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds ,QCI=9
Short Name
DRB.PdcpSduHarqDl.QCI9
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about QCI9 PDCP SDU,for which
all parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
QCI9 PDCP SDU,for which all parts have been transmitted over the air.
Counter Type
Accumulated value
Sampling Period
15 min
16-541
Unit
unit
16.9.3.3.28 C374553959
Counter Name
UL PDCP SDU Number
Short Name
DRB.PdcpSduUl
Counter Description
After the PDCP layer receives the PDCP PDU from RLC layer,the PDU is disposed
successfully and than becomes PDCP SDU. The counter is used to count the number of
the SDU.
Triggering Point
When the eNodeB PDCP layer sends the PDCP packet in the uplink
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer sends the PDCP packet in
the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.29 C374553960
Counter Name
DL PDCP SDU Number
Short Name
DRB.PdcpSduDl
16-542
Counter Description
When the eNodeB PDCP layer receives the PDCP SDU from the SGW or the other
eNodeB.the counter is used to count.
Triggering Point
When the eNodeB PDCP layer receives the PDCP SDU.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB PDCP layer receives the PDCP SDU from
the SGW or the other eNodeB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16.9.3.3.30 C374553961
Counter Name
DL PDCP SDU Number Which HARQ Successfully Responds
Short Name
DRB.PdcpSduHarqDl
Counter Description
The counter provides the number of PDCP SDU when the last piece was received by the
UE according to received HARQ feedback information.
Triggering Point
When the eNodeB got the all positive acknowledgment about PDCP SDU,for which all
parts have been transmitted over the air.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB got the all positive acknowledgment about
PDCP SDU,for which all parts have been transmitted over the air.
16-543
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
16-544
16.10.1.3.1 C374584300
Counter Name
Average UL Active User Number(QCI=1)
Short Name
DRB.UEActiveUl.QCI1
16-545
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI1 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI1 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.2 C374584301
Counter Name
Average UL Active User Number(QCI=2)
Short Name
DRB.UEActiveUl.QCI2
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI2 DRB at
sampling time.
Refer to .
16-546
Update Description
The counter is updated by accumulating all the sample UL QCI2 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.3 C374584302
Counter Name
Average UL Active User Number(QCI=3)
Short Name
DRB.UEActiveUl.QCI3
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI3 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI3 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-547
Unit
unit
16.10.1.3.4 C374584303
Counter Name
Average UL Active User Number(QCI=4)
Short Name
DRB.UEActiveUl.QCI4
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI4 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI4 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.5 C374584304
Counter Name
Average UL Active User Number(QCI=5)
Short Name
DRB.UEActiveUl.QCI5
16-548
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI5 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI5 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.6 C374584305
Counter Name
Average UL Active User Number(QCI=6)
Short Name
DRB.UEActiveUl.QCI6
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI6 DRB at
sampling time.
Refer to .
16-549
Update Description
The counter is updated by accumulating all the sample UL QCI6 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.7 C374584306
Counter Name
Average UL Active User Number(QCI=7)
Short Name
DRB.UEActiveUl.QCI7
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI7 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI7 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-550
Unit
unit
16.10.1.3.8 C374584307
Counter Name
Average UL Active User Number(QCI=8)
Short Name
DRB.UEActiveUl.QCI8
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI8 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI8 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.9 C374584308
Counter Name
Average UL Active User Number(QCI=9)
Short Name
DRB.UEActiveUl.QCI9
16-551
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI9 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample UL QCI9 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.10 C374584309
Counter Name
Average DL Active User Number(QCI=1)
Short Name
DRB.UEActiveDl.QCI1
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI1 DRB at
sampling time.
Refer to .
16-552
Update Description
The counter is updated by accumulating all the sample DL QCI1 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.11 C374584310
Counter Name
Average DL Active User Number(QCI=2)
Short Name
DRB.UEActiveDl.QCI2
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI2 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI2 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-553
Unit
unit
16.10.1.3.12 C374584311
Counter Name
Average DL Active User Number(QCI=3)
Short Name
DRB.UEActiveDl.QCI3
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI3 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI3 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.13 C374584312
Counter Name
Average DL Active User Number(QCI=4)
Short Name
DRB.UEActiveDl.QCI4
16-554
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI4 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI4 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.14 C374584313
Counter Name
Average DL Active User Number(QCI=5)
Short Name
DRB.UEActiveDl.QCI5
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI5 DRB at
sampling time.
Refer to .
16-555
Update Description
The counter is updated by accumulating all the sample DL QCI5 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.15 C374584314
Counter Name
Average DL Active User Number(QCI=6)
Short Name
DRB.UEActiveDl.QCI6
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI6 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI6 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
16-556
Unit
unit
16.10.1.3.16 C374584315
Counter Name
Average DL Active User Number(QCI=7)
Short Name
DRB.UEActiveDl.QCI7
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI7 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI7 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.17 C374584316
Counter Name
Average DL Active User Number(QCI=8)
Short Name
DRB.UEActiveDl.QCI8
16-557
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI8 DRB at
sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL QCI8 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.18 C374584317
Counter Name
Average DL Active User Number(QCI=9)
Short Name
DRB.UEActiveDl.QCI9
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI9 DRB at
sampling time.
Refer to .
16-558
Update Description
The counter is updated by accumulating all the sample DL QCI9 active UEs, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.1.3.19 C374584318
Counter Name
Maximum UL Active User Number(QCI=1)
Short Name
DRB.UEActiveUlMax.QCI1
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI1 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI1 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-559
Unit
unit
16.10.1.3.20 C374584319
Counter Name
Maximum UL Active User Number(QCI=2)
Short Name
DRB.UEActiveUlMax.QCI2
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI2 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI2 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.21 C374584320
Counter Name
Maximum UL Active User Number(QCI=3)
Short Name
DRB.UEActiveUlMax.QCI3
16-560
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI3 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI3 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.22 C374584321
Counter Name
Maximum UL Active User Number(QCI=4)
Short Name
DRB.UEActiveUlMax.QCI4
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI4 DRB at
sampling time.
Refer to .
16-561
Update Description
The counter is replaced with the current value when the current UL QCI4 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.23 C374584322
Counter Name
Maximum UL Active User Number(QCI=5)
Short Name
DRB.UEActiveUlMax.QCI5
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI5 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI5 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-562
Unit
unit
16.10.1.3.24 C374584323
Counter Name
Maximum UL Active User Number(QCI=6)
Short Name
DRB.UEActiveUlMax.QCI6
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI6 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI6 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.25 C374584324
Counter Name
Maximum UL Active User Number(QCI=7)
Short Name
DRB.UEActiveUlMax.QCI7
16-563
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI7 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI7 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.26 C374584325
Counter Name
Maximum UL Active User Number(QCI=8)
Short Name
DRB.UEActiveUlMax.QCI8
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI8 DRB at
sampling time.
Refer to .
16-564
Update Description
The counter is replaced with the current value when the current UL QCI8 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.27 C374584326
Counter Name
Maximum UL Active User Number(QCI=9)
Short Name
DRB.UEActiveUlMax.QCI9
Counter Description
Number of UEs for which there is buffered data for the UL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in UL buffer for QCI9 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current UL QCI9 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-565
Unit
unit
16.10.1.3.28 C374584327
Counter Name
Maximum DL Active User Number(QCI=1)
Short Name
DRB.UEActiveDlMax.QCI1
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 1 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI1 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI1 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.29 C374584328
Counter Name
Maximum DL Active User Number(QCI=2)
Short Name
DRB.UEActiveDlMax.QCI2
16-566
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 2 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI2 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI2 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.30 C374584329
Counter Name
Maximum DL Active User Number(QCI=3)
Short Name
DRB.UEActiveDlMax.QCI3
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 3 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI3 DRB at
sampling time.
Refer to .
16-567
Update Description
The counter is replaced with the current value when the current DL QCI3 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.31 C374584330
Counter Name
Maximum DL Active User Number(QCI=4)
Short Name
DRB.UEActiveDlMax.QCI4
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 4 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI4 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI4 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-568
Unit
unit
16.10.1.3.32 C374584331
Counter Name
Maximum DL Active User Number(QCI=5)
Short Name
DRB.UEActiveDlMax.QCI5
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 5 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI5 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI5 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.33 C374584332
Counter Name
Maximum DL Active User Number(QCI=6)
Short Name
DRB.UEActiveDlMax.QCI6
16-569
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 6 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI6 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI6 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.34 C374584333
Counter Name
Maximum DL Active User Number(QCI=7)
Short Name
DRB.UEActiveDlMax.QCI7
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 7 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI7 DRB at
sampling time.
Refer to .
16-570
Update Description
The counter is replaced with the current value when the current DL QCI7 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.35 C374584334
Counter Name
Maximum DL Active User Number(QCI=8)
Short Name
DRB.UEActiveDlMax.QCI8
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 8 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI8 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI8 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
16-571
Unit
unit
16.10.1.3.36 C374584335
Counter Name
Maximum DL Active User Number(QCI=9)
Short Name
DRB.UEActiveDlMax.QCI9
Counter Description
Number of UEs for which there is buffered data for the DL in MAC, RLC or PDCP protocol
layers for a Data Radio Bearer of traffic class with QCI = 9 at sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in DL buffer for QCI9 DRB at
sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current DL QCI9 actives UEs is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.37 C374584348
Counter Name
Maximum Active User Number on User Plane
Short Name
-
16-572
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers for
Data Radio Bearer of traffic class at sampling time. The counter provides the maximum
value in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current actives UEs is larger than
the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.1.3.38 C374584349
Counter Name
Average Active User Number on User Plane
Short Name
-
Counter Description
Number of UEs for which there is buffered data in MAC, RLC or PDCP protocol layers
for Data Radio Bearer of traffic class at sampling time.The counter provides the average
value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the number of UEs which has data in buffer at sampling time.
Refer to .
16-573
Update Description
The counter is updated by accumulating all the sample active UEs, and then dividing the
sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16.10.2.3.1 C374584336
Counter Name
Maximum Number of UE that can be simultaneously
Short Name
SAE.UEActiveStateMax
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX
16-574
high level.Otherwise the user is inactive.The counter provides the maximum value in the
measurement period.
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current active state UEs is larger
than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
100 ms
Unit
unit
16.10.2.3.2 C374584337
Counter Name
Minimum Number of UE that can be simultaneously
Short Name
SAE.UEActiveStateMin
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX
high level.Otherwise the user is inactive.The counter provides the minimum value in the
measurement period.
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time.
Refer to .
Update Description
The counter is replaced with the current value when the current active state UEs is smaller
than the prior at sampling point.
16-575
Counter Type
Minimum value
Sampling Period
100 ms
Unit
unit
16.10.2.3.3 C374584338
Counter Name
Average Number of UE that can be simultaneously
Short Name
SAE.UEActiveStateMean
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX high
level.Otherwise the user is inactive.The counter provides the average value of all sampling
point in the measurement period.
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time.
Refer to .
Update Description
The counter is updated by accumulating all the sample active state UEs, and then dividing
the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
16-576
17-1
l Sampling point 1: Record the actual power of PDSCH within Type A and Type B
symbols, and then choose the larger one as the sample value.
17-2
Counter Name
Maximum DL Transmit Power Per Cell
Short Name
RRU.TranPowerMax
Counter Description
The eNodeB collects the DL power at per sampling time.The counter take the maximum
of DL power among sampling points.
Triggering Point
When the eNodeB collects the power of TypeA and TypeB At sampling time, and then
selects the larger between TypeA and TypeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL power is larger than
the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
mw
17-3
17.1.3.2 C373414551
Counter Name
Minimal DL Transmit Power Per Cell
Short Name
RRU.TranPowerMin
Counter Description
The eNodeB collects the DL power at per sampling time.The counter take the minimum of
DL power among sampling points.
Triggering Point
When the eNodeB collects the power of TypeA and TypeB At sampling time, and then
selects the larger between TypeA and TypeB.
Refer to .
Update Description
The counter is replaced with the current value when the current DL power is smaller than
the prior at sampling point.
Counter Type
Minimum value
Sampling Period
1 ms
Unit
mw
17.1.3.3 C373414552
Counter Name
Average DL Transmit Power Per Cell
Short Name
RRU.TranPowerMean
17-4
Counter Description
The eNodeB collects the DL power at per sampling time.The counter take the average of
DL power among sampling points.
Triggering Point
When the eNodeB collects the power of TypeA and TypeB At sampling time, and then
select the larger between TypeA and TypeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample DL power, and then dividing the
sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
mw
17.1.3.4 C373414591
Counter Name
Maximum Cell Transmit Power
Short Name
-
Counter Description
This counter counts the maximum sampling value of the RRU transmit power of a cell. The
sampling period can be configured by the operator.
Triggering Point
This counter collects the transmit power of a cell at each sampling time.
Refer to .
17-5
Update Description
At each sampling time, this counter is updated to the maximum sampling value of the
downlink transmit power.
Counter Type
Maximum value
Sampling Period
10 s
Unit
W
17.1.3.5 C373414592
Counter Name
Average Cell Transmit Power
Short Name
-
Counter Description
This counter counts the average value of the RRU transmit power samples of a cell. The
sampling period can be configured by the operator.
Triggering Point
This counter collects the transmit power of a cell at each sampling time.
Refer to .
Update Description
In each measurement period, this counter is updated to the average value of all the
downlink transmit power samples.
Counter Type
Average value
Sampling Period
10 s
17-6
Unit
W
Counter Name
Maximum RSSI
Short Name
RRU.RSSIMax
Counter Description
The eNodeB RRU samples the received power once at each sampling point. After the
report period expires, it reports the maximum receiving power value of the report period.
Triggering Point
The eNodeB RRU collects the received power at sampling time
Refer to .
17-7
Update Description
The counter is replaced with the current value when the current RSSI is larger than the
prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
Unit
dBm
17.2.3.2 C373910001
Counter Name
Minimum RSSI
Short Name
RRU.RSSIMin
Counter Description
The eNodeB RRU samples the receiving power once at each sampling point. After the
report period expires, it reports the minimum receiving power value of the report period.
Triggering Point
The eNodeB RRU collects the received power at sampling time
Refer to .
Update Description
The counter is replaced with the current value when the current RSSI is smaller than the
prior at sampling point.
Counter Type
Minimum value
Sampling Period
10 s
17-8
Unit
dBm
17.2.3.3 C373910002
Counter Name
Average RSSI
Short Name
RRU.RSSIMean
Counter Description
The eNodeB RRU samples the receiving power once at each sampling point. After the
report period expires, it reports the average receiving power value of the report period.
Triggering Point
The eNodeB RRU collects the received power at sampling time
Refer to .
Update Description
The counter is updated by accumulating all the sample RSSI, and then dividing the sum
by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
dBm
17.2.3.4 C373414593
Counter Name
Maximum Cell RSSI
Short Name
-
17-9
Counter Description
The power received by an RRU at every sampling point is recorded. The RRU then notifies
the OAM system of the power, and the OAM system takes the maximum power as the
sampling value in accordance with the information of the cell that the carrier matches. The
maximum receive power is the maximum value of all receive powers at all sampling points
within a reporting period.
Triggering Point
The power received by an RRU at every sampling point is recorded. The RRU then notifies
the OAM system of the power, and the OAM system takes the maximum power as the
sampling value in accordance with the information of the cell that the carrier matches. The
maximum receive power is the maximum value of all receive powers at all sampling points
within a reporting period.
Refer to .
Update Description
The power received by an RRU at every sampling point is recorded. The RRU then notifies
the OAM system of the power, and the OAM system takes the maximum power as the
sampling value in accordance with the information of the cell that the carrier matches. The
maximum receive power is the maximum value of all receive powers at all sampling points
within a reporting period. This counter reports the updated maximum receive power.
Counter Type
Maximum value
Sampling Period
10 s
Unit
dBm
17.2.3.5 C373414594
Counter Name
Minimum Cell RSSI
Short Name
-
17-10
Counter Description
The power received by an RRU at every sampling point is recorded. The RRU then notifies
the OAM system of the power, and the OAM system takes the minimum power as the
sampling value in accordance with the information of the cell that the carrier matches. The
minimum receive power is the minimum value of all receive powers at all sampling points
within a reporting period.
Triggering Point
The power received by an RRU at every sampling point is recorded. The RRU then notifies
the OAM system of the power, and the OAM system takes the minimum power as the
sampling value in accordance with the information of the cell that the carrier matches. The
minimum receive power is the minimum value of all receive powers at all sampling points
within a reporting period.
Refer to .
Update Description
The power received by an RRU at every sampling point is recorded. The RRU then notifies
the OAM system of the power, and the OAM system takes the minimum power as the
sampling value in accordance with the information of the cell that the carrier matches. The
minimum receive power is the minimum value of all receive powers at all sampling points
within a reporting period. The counter reports the updated minimum receive power.
Counter Type
Minimum value
Sampling Period
10 s
Unit
dBm
17.2.3.6 C373414595
Counter Name
Average Cell RSSI
Short Name
-
17-11
Counter Description
The power received by an RRU at every sampling point is recorded. The RRU then
notifies the OAM system of the power, and the OAM system reports the statistics result in
accordance with the information of the cell that the carrier matches. The average receive
power is the average value of all receive powers at all sampling points within a reporting
period.
Triggering Point
The power received by an RRU at every sampling point is recorded. The RRU then
notifies the OAM system of the power, and the OAM system reports the statistics result in
accordance with the information of the cell that the carrier matches. The average receive
power is the average value of all receive powers at all sampling points within a reporting
period.
Refer to .
Update Description
The power received by an RRU at every sampling point is recorded. The RRU then
notifies the OAM system of the power, and the OAM system reports the statistics result in
accordance with the information of the cell that the carrier matches. The average receive
power is the average value of all receive powers at all sampling points within a reporting
period. The counter reports the updated average receive power.
Counter Type
Average value
Sampling Period
10 s
Unit
dBm
17-12
Counter Name
Number of Power Headroom Reported by UE in the range of -23 to -11
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of -23 to -11.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
17-13
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of -23 to -11,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.2 C374047401
Counter Name
Number of Power Headroom Reported by UE in the range of -10 to -6
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of -10 to -6.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of -10 to -6,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
17-14
Unit
times
17.3.3.3 C374047402
Counter Name
Number of Power Headroom Reported by UE in the range of -5 to -1
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of -5 to -1.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of -5 to -1,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.4 C374047403
Counter Name
Number of Power Headroom Reported by UE in the range of 0 to 5
Short Name
-
17-15
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of 0 to 5.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of 0 to 5,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.5 C374047404
Counter Name
Number of Power Headroom Reported by UE in the range of 6 to 10
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of 6 to 10.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
17-16
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of 6 to 10,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.6 C374047405
Counter Name
Number of Power Headroom Reported by UE in the range of 11 to 15
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of 11 to 15.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of 11 to 15,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
17-17
Unit
times
17.3.3.7 C374047406
Counter Name
Number of Power Headroom Reported by UE in the range of 16 to 20
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of 16 to 20.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of 16 to 20,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.8 C374047407
Counter Name
Number of Power Headroom Reported by UE in the range of 21 to 25
Short Name
-
17-18
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of 21 to 25.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of 21 to 25,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.9 C374047408
Counter Name
Number of Power Headroom Reported by UE in the range of 26 to 40
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
whithin the range of 26 to 40.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
17-19
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is whithin the range of 26 to 40,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.3.3.10 C374047409
Counter Name
Number of Power Headroom Reported by UE lower than -23
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
lower than -23.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is lower than -23,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
17-20
Unit
times
17.3.3.11 C374047410
Counter Name
Number of Power Headroom Reported by UE higher than 40
Short Name
-
Counter Description
The Power Headroom reported by UE indicates the difference between UE transmit power
and maximum UE transmit power. The counter shows the number of Power Headroom
higher than 40.
Triggering Point
When the eNodeB receives the TB including MACCE Power Headroom
Refer to .
Update Description
When the eNodeB receives the TB including MACCE Power Headroom and the PHR value
is higher than 40,the counter is increased by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-21
17-22
Counter Name
PRB Number Used on PUSCH Channel
17-23
Short Name
RRU.PrbTotUsedUl.PUSCH
Counter Description
It is all available PRBs that eNodeB have assigned for PUSCH on the uplink.
Triggering Point
When eNodeB uplink scheduler schedule TB and assign the PRB in PUSCH channel.
Refer to .
Update Description
The counter is increased by the assigned PRB number for PUSCH at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.2 C373424601
Counter Name
PRB Number Available on PUSCH Channel
Short Name
RRU.PrbTotAvalUl.PUSCH
Counter Description
It is PRB number that eNodeB allocates for PUSCH channel, is equal to the PRB number
for system bandwidth minus the PRB number for PUCCH.
Triggering Point
The eNodeB collect the available PRB number for PUSCH at sampling point.
Refer to .
17-24
Update Description
The counter is increased by the available PRB number for PUSCH at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.3 C373424602
Counter Name
PRB Number Used on PDSCH Channel
Short Name
RRU.PrbTotUsedDl.PDSCH
Counter Description
It is all available PRBs that eNodeB have assigned for PDSCH on the downlink.
Triggering Point
When eNodeB downlink scheduler schedule TB and assign the PRB in PDSCH channel.
Refer to .
Update Description
The counter is increased by the PRB number used for PDSCH
channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-25
17.4.3.4 C373424603
Counter Name
PRB Number Available on PDSCH Channel
Short Name
RRU.PrbTotAvalDl.PDSCH
Counter Description
It is PRB number that eNodeB allocates for PDSCH channel, is equal to the PRB number
for system bandwidth on the downlink.
Triggering Point
The eNodeB collect the available PRB number for PDSCH at sampling point.
Refer to .
Update Description
The counter is increased by the available PRB number for PDSCH at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.5 C373424604
Counter Name
CCE Number Used on PDCCH Channel
Short Name
RRU.CceTotUsedDl.PDCCH
Counter Description
The counter counts the number of CCEs that the eNodeB allocates to the PDCCH. It
includes DCI0, DCI1, DCI1A, and DCI2. The number of used CCEs = The number of
17-26
allocated DCIs (including the uplink DCI0 and the downlink DCI) * The number of CCE
that one DCI occupies
Triggering Point
The eNodeB calculates the number of CCEs that each DCI uses in each
TTI.
Refer to .
Update Description
The counter is updated by adding the previous value and the number
of measured CCEs in each TTI.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.6 C373424605
Counter Name
CCE Number Available on PDCCH Channel
Short Name
RRU.CceTotAvalDl.PDCCH
Counter Description
The eNodeB uplink scheduler calculates the number of available CCEs on the basis of the
CFI and system bandwidth reported by the UE.The number of avaiable CCEs on PDCCH
= (The number of available
REGs - The number of REGs occupied by PHICH - The number of REGs occupied by
PCFICH)/9
Triggering Point
The eNodeB calculates the number of CCEs that each DCI uses in each
TTI.
17-27
Refer to .
Update Description
The counter is updated by adding the previous value and the number
of CCEs when the CFI is received from the UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.7 C373424608
Counter Name
PRB Number Used on Uplink Channel
Short Name
RRU.PrbTotUsedUl
Counter Description
It is all available PRBs that eNodeB have assigned for uplink channel. The channel
includes PRACH,PUCCH and PUSCH.
Triggering Point
When eNodeB uplink scheduler schedule the TB for uplink
channel.
Refer to .
Update Description
The counter is increased by the PRB number used for uplink
Counter Type
Accumulated value
17-28
Sampling Period
15 min
Unit
unit
17.4.3.8 C373424609
Counter Name
PRB Number Available on Uplink Channel
Short Name
RRU.PrbTotAvalUl
Counter Description
It is PRB number that eNodeB allocates for uplink channel, is equal to the PRB number
for system banwidth.
Triggering Point
When eNodeB uplink scheduler assign PRB for uplink channel.
Refer to .
Update Description
The counter is increased by the PRB number allocated for
uplink channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.9 C373424610
Counter Name
PRB Number Used on Downlink Channel
17-29
Short Name
RRU.PrbTotUsedDl
Counter Description
It is all available PRBs that eNodeB have assigned for downlink channel.
Triggering Point
When eNodeB downlink scheduler schedule TB and assign the PRB in downlink channel.
Refer to .
Update Description
The counter is increased by the PRB number used for PDSCH
channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.10 C373424611
Counter Name
PRB Number Available on Downlink Channel
Short Name
RRU.PrbTotAvalDl
Counter Description
It is PRB number that eNodeB allocates for downlink channel, is equal to the PRB number
for system banwidth on the downlink.
Triggering Point
When eNodeB downlink scheduler assign PRB for the PDSCH
channel.
Refer to .
17-30
Update Description
The counter is increased by the available PRB number in
PDSCH channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.11 C373424630
Counter Name
UL Peak PRB Usage
Short Name
RRU.PrbPeakUsage
Counter Description
The eNodeB caculates the PRB usage about uplink channel.
Detailed Definitions:
the number of PRB for transport block / the total number of available PRB for PUSCH.
Triggering Point
The eNodeB caculates the PRB usage about uplink channel.
Refer to .
Update Description
The counter is replaced with the current when the current UL PRB usage is larger than the
prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-31
Unit
percent
17.4.3.12 C373424631
Counter Name
DL Peak PRB Usage
Short Name
RRU.PrbPeakUsage
Counter Description
The eNodeB caculates the PRB usage about downlink channel.
Detailed Definitions:
the number of PRB for transport block / the total number of available PRB for PDSCH.
Triggering Point
The eNodeB caculates the PRB usage about downlink channel.
Refer to .
Update Description
The counter is replaced with the current when the current DL PRB usage is larger than the
prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
percent
17.4.3.13 C373424632
Counter Name
UL PRBs full assigned Time
17-32
Short Name
RRU.PrbCongestionUl.time
Counter Description
This counter counts the number of TTIs in which all the available uplink PRBs are occupied.
Triggering Point
When the eNodeB uplink scheduler performs scheduling, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler performs scheduling, if all the current available uplink
PRBs are occupied, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
ms
17.4.3.14 C373424633
Counter Name
DL PRBs full assigned Time
Short Name
RRU.PrbCongestionDl.time
Counter Description
This counter counts the number of TTIs in which all the available downlink PRBs are
occupied.
Triggering Point
When the eNodeB downlink scheduler performs scheduling, this counter is updated.
Refer to .
17-33
Update Description
When the eNodeB downlink scheduler performs scheduling, if all the current available
downlink PRBs are occupied, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
ms
17.4.3.15 C373424634
Counter Name
UL RACH RBs
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for RACH on the uplink.
Triggering Point
When the eNodeB receives the Msg1 from the UE
Refer to .
Update Description
When the eNodeB receives the Msg1 from the UE,the counter is increased by the PRB
number allocated for it.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-34
17.4.3.16 C373424635
Counter Name
UL DCCH RBs
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for DCCH on the uplink.
Triggering Point
When the SRB data is scheduled by eNodeB uplink scheduler.
Refer to .
Update Description
When the SRB data is scheduled by eNodeB uplink scheduler,the counter is increased by
the PRB number allocated for it.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.17 C373424636
Counter Name
UL DTCH RBs
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for DTCH on the uplink.
17-35
Triggering Point
When the traffic data is scheduled by eNodeB uplink scheduler.
Refer to .
Update Description
When the traffic data is scheduled by eNodeB uplink scheduler,the counter is increased
by the PRB number allocated for it.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.18 C373424637
Counter Name
DL PCCH RBs
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for PCCH on the downlink.
Triggering Point
When the paging message is scheduled by eNodeB downlink scheduler.
Refer to .
Update Description
When the paging message is scheduled by eNodeB downlink scheduler,the counter is
increased by the PRB number allocated for it.
Counter Type
Accumulated value
17-36
Sampling Period
15 min
Unit
unit
17.4.3.19 C373424638
Counter Name
DL BCCH RBs
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for BCCH on the downlink.
Triggering Point
When the broadcast message is scheduled by eNodeB downlink scheduler.
Refer to .
Update Description
When the broadcast message is scheduled by eNodeB downlink scheduler,the counter is
increased by the PRB number allocated for it.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.20 C373424639
Counter Name
DL DCCH RBs
17-37
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for DCCH on the downlink.
Triggering Point
When the SRB data is scheduled by eNodeB downlink scheduler.
Refer to .
Update Description
When the SRB data is scheduled by eNodeB downlink scheduler,the counter is increased
by the PRB number allocated for it.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.21 C373424640
Counter Name
DL DTCH RBs
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for DTCH on the downlink.
Triggering Point
When the traffic data is scheduled by eNodeB downlink scheduler.
Refer to .
17-38
Update Description
When the traffic data is scheduled by eNodeB downlink scheduler,the counter is increased
by the PRB number allocated for it.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.22 C373424641
Counter Name
PRB Number Used on PUSCH Channel within The Threshold
Short Name
RRU.PrbThreUsedUl.PUSCH
Counter Description
The counter displays the allocated RB number when eNB sends DCI0 or MSG 2 at the
sample moment and the reserved RB number during non-adaptive retransmission or SPS
scheduling.
Triggering Point
When there are uplink PRB used for the PUSCH, and the
threshold requirements for RSRP and SINR must be satisfied.
Users can set these threshold values, and the default threshold
requirements are: RSRP > Threshold for RSRP Statistics and
Refer to .
Update Description
The counter is updated by the new data during UL data
transmission.
17-39
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.23 C373424642
Counter Name
PRB Number Used on PDSCH Channel within The Threshold
Short Name
RRU.PrbThreUsedDl.PDSCH
Counter Description
The counter statics the sum number of PRB used for PDSCH channel within the
threshold,but but exclude retransmission PRB number.The counter displays the allocated
PRB number when eNB sends DCI1/1A/2/2A at the sample moment and the reserved
PRB number during non-adaptive retransmission or SPS scheduling.Users can set these
threshold values, and the default threshold requirements are: RSRP > Threshold for
RSRP Statistics and DL SINR > Threshold for DL SINR Statistics.The RSRP threshold
is converted by Power Headroom reporting that UE reports by means of period or event
trigger.The DL SINR threshold is converted by CQI reported by UE.
Triggering Point
When there are downlink PRB used for the PDSCH, and
the threshold requirements for RSRP and DL SINR must be
satisfied.
Refer to .
Update Description
The counter is updated when a new measurement value is
obtained.
Counter Type
Accumulated value
17-40
Sampling Period
15 min
Unit
unit
17.4.3.24 C373424697
Counter Name
TTI Number of PUSCH
Short Name
-
Counter Description
This counter counts the total number of available TTIs of the PUSCH.
Triggering Point
This counter counts the total number of TTIs of the PUSCH.
Refer to .
Update Description
This counter is incremented when the number of available TTIs of the PUSCH changes.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.25 C373424698
Counter Name
TTI Number of PDSCH
17-41
Short Name
-
Counter Description
This counter counts the total number of available TTIs of the PDSCH, including the special
TTIs that can transmit services.
Triggering Point
This counter counts the total number of TTIs of the PDSCH, including the special TTIs that
can transmit services.
Refer to .
Update Description
This counter is incremented when the number of available TTIs of the PDSCH changes,
including the special TTIs that can transmit services.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.26 C373444750
Counter Name
Number of Successful Access Using Group A Preamble
Short Name
RRU.RachPreambleAMean
Counter Description
The eNodeB uplink scheduler detects the Preamble in each TTI and the counter counts
the number of successful detections.Group A Preamble is the Preamble whose value is
lower than sizeOfRA-PreamblesGroupA.
Triggering Point
The MAC calculates the number of Preambles reported after the PHY
17-42
Update Description
The counter is updated by adding the previous value and the number
of measured Preambles in each TTI.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.27 C373444751
Counter Name
Number of Successful Access Using Group B Preamble
Short Name
RRU.RachPreambleBMean
Counter Description
The CMAC uplink scheduler detects the Preamble in each TTI and the counter counts the
number of successful detections.Group B Preamble is the Preamble whose value is lower
than numberOfRA-Preambles and higher than or equal to
sizeOfRA-PreamblesGroupA.
Triggering Point
The MAC calculates the number of Preambles reported after the PHY
Update Description
The counter is updated by adding the previous value and the number
17-43
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.28 C373444752
Counter Name
Number of Successful Access Using Dedicated Preamble
Short Name
RRU.RachPreambleDedMean
Counter Description
The eNodeB uplink scheduler detects the Preamble in each TTI and the counter counts
the number of successful detections.Dedicated Preamble is the Preamble whose value is
higher than or equal to numberOfRA-Preambles.
Triggering Point
The MAC calculates the number of Preambles reported after the PHY
detection in each TTI.
Refer to .
Update Description
The counter is updated by adding the previous value and the number
of measured Preambles in each TTI.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-44
17.4.3.29 C373444753
Counter Name
Number of Failed Access Using Dedicated Preamble
Short Name
Number of failed access using dedicated preamble
Counter Description
The eNodeB receives Msg1 and detects a dedicated Preamble, but the UeIndex
corresponding to the PreambleID is not the one of this cell. This counter counts the
number of access failures with error dedicated Preambles.
Triggering Point
When the eNodeB detects a dedicated Preamble and checks it to find that the PreambleID
is not the one of this cell, this counter is updated.
Refer to .
Update Description
When the eNodeB detects a dedicated Preamble and checks it to find that the PreambleID
is not the one of this cell, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.4.3.30 C373424654
Counter Name
QCI1 PRB Number used for UL Traffic
Short Name
-
17-45
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI1 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI1 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.31 C373424655
Counter Name
QCI2 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI2 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI2 DRB uplink service.
17-46
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.32 C373424656
Counter Name
QCI3 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI3 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI3 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-47
17.4.3.33 C373424657
Counter Name
QCI4 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI4 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI4 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.34 C373424658
Counter Name
QCI5 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI5 DRB services.
17-48
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI5 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.35 C373424659
Counter Name
QCI6 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI6 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI6 DRB uplink service.
Counter Type
Accumulated value
17-49
Sampling Period
15 min
Unit
unit
17.4.3.36 C373424660
Counter Name
QCI7 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI7 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI7 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.37 C373424661
Counter Name
QCI8 PRB Number used for UL Traffic
17-50
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI8 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI8 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.38 C373424662
Counter Name
QCI9 PRB Number used for UL Traffic
Short Name
-
Counter Description
When the eNodeB uplink scheduler schedules TBs, this counter counts the number of
PRBs occupied by uplink QCI9 DRB services.
Triggering Point
When the eNodeB uplink scheduler schedules TBs, this counter is updated.
Refer to .
17-51
Update Description
When the eNodeB uplink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI9 DRB uplink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.39 C373424663
Counter Name
QCI1 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI1 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI1 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
17-52
Unit
unit
17.4.3.40 C373424664
Counter Name
QCI2 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI2 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI2 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.41 C373424665
Counter Name
QCI3 PRB Number used for DL Traffic
Short Name
-
17-53
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI3 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI3 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.42 C373424666
Counter Name
QCI4 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI4 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI4 DRB downlink service.
17-54
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.43 C373424667
Counter Name
QCI5 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI5 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI5 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-55
17.4.3.44 C373424668
Counter Name
QCI6 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI6 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI6 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.45 C373424669
Counter Name
QCI7 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI7 DRB services.
17-56
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI7 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.46 C373424670
Counter Name
QCI8 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI8 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI8 DRB downlink service.
Counter Type
Accumulated value
17-57
Sampling Period
15 min
Unit
unit
17.4.3.47 C373424671
Counter Name
QCI9 PRB Number used for DL Traffic
Short Name
-
Counter Description
When the eNodeB downlink scheduler schedules TBs, this counter counts the number of
PRBs occupied by downlink QCI9 DRB services.
Triggering Point
When the eNodeB downlink scheduler schedules TBs, this counter is updated.
Refer to .
Update Description
When the eNodeB downlink scheduler schedules TBs, this counter is incremented by the
number of PRBs occupied by QCI9 DRB downlink service.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.48 C374624608
Counter Name
PRB Number Used on Uplink Channel(PLMN)
17-58
Short Name
RRU.PrbTotUsedUl
Counter Description
It is all available PRBs that eNodeB have assigned for uplink channel. The channel
includes PRACH,PUCCH and PUSCH.
Triggering Point
When eNodeB uplink scheduler schedule the TB for uplink
channel.
Refer to .
Update Description
The counter is increased by the PRB number used for uplink
channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.49 C374624609
Counter Name
PRB Number Available on Uplink Channel(PLMN)
Short Name
RRU.PrbTotAvalUl
Counter Description
It is PRB number that eNodeB allocates for uplink channel, is equal to the PRB number
for system banwidth.
Triggering Point
When eNodeB uplink scheduler assign PRB for uplink channel.
17-59
Refer to .
Update Description
The counter is increased by the PRB number allocated for
uplink channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.50 C374624610
Counter Name
PRB Number Used on Downlink Channel(PLMN)
Short Name
RRU.PrbTotUsedDl
Counter Description
It is all available PRBs that eNodeB have assigned for downlink channel.
Triggering Point
When eNodeB downlink scheduler schedule TB and assign the PRB in downlink channel.
Refer to .
Update Description
The counter is increased by the PRB number used for PDSCH
channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
17-60
Unit
unit
17.4.3.51 C374624611
Counter Name
PRB Number Available on Downlink Channel(PLMN)
Short Name
RRU.PrbTotAvalDl
Counter Description
It is PRB number that eNodeB allocates for downlink channel, is equal to the PRB number
for system banwidth on the downlink.
Triggering Point
When eNodeB downlink scheduler assign PRB for the PDSCH
channel.
Refer to .
Update Description
The counter is increased by the available PRB number in
PDSCH channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.4.3.52 C373424606
Counter Name
Peak PRB Usage for PUSCH
17-61
Short Name
RRU.PrbPeakUsage.PUSCH
Counter Description
The eNodeB caculates the PRB usage about uplink channel.Detailed Definitions:
the number of PRB for transport block / the total number of available PRB for PUSCH.
Triggering Point
The eNodeB caculates the PRB usage about PUSCH channel.
Refer to .
Update Description
The counter is replaced with the current when the current PUSCH PRB usage is larger
than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
percent
17.4.3.53 C373424607
Counter Name
Peak PRB Usage for PDSCH
Short Name
RRU.PrbPeakUsage.PDSCH
Counter Description
The eNodeB caculates the PRB usage about uplink channel.Detailed Definitions:
the number of PRB for transport block / the total number of available PRB for PDSCH.
Triggering Point
The eNodeB caculates the PRB usage about PDSCH channel.
Refer to .
17-62
Update Description
The counter is replaced with the current when the current PDSCH PRB usage is larger
than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
percent
17.4.3.54 C373596954
Counter Name
UL PRB Usage of LB Cell
Short Name
-
Counter Description
This counter counts the total uplink PRB usage. The sampling period is one TTI, and the
usage is calculated per second based on the formula. The calculation result and that of
the previous second are calculated in accordance with a formula with a smooth factor.
Triggering Point
This counter counts the total uplink PRB usage. The sampling period is one TTI, and the
usage is calculated per second based on the formula. The calculation result and that of
the previous second are calculated in accordance with a formula with a smooth factor.
Refer to .
Update Description
This counter counts the total uplink PRB usage. The sampling period is one TTI, and the
usage is calculated per second based on the formula. The calculation result and that of the
previous second are calculated in accordance with a formula with a smooth factor. This
counter reports the updated usage calculated in the current period.
Counter Type
Maximum value
17-63
Sampling Period
1 ms
Unit
percent
17.4.3.55 C373596955
Counter Name
DL PRB Usage of LB Cell
Short Name
-
Counter Description
This counter counts the total downlink PRB usage. The sampling period is one TTI, and
the usage is calculated per second based on the formula. The calculation result and that
of the previous second are calculated in accordance with a formula with a smooth factor.
Triggering Point
This counter counts the total downlink PRB usage. The sampling period is one TTI, and
the usage is calculated per second based on the formula. The calculation result and that
of the previous second are calculated in accordance with a formula with a smooth factor.
Refer to .
Update Description
This counter counts the total downlink PRB usage. The sampling period is one TTI, and
the usage is calculated per second based on the formula. The calculation result and that
of the previous second are calculated in accordance with a formula with a smooth factor.
This counter reports the updated usage calculated in the current period.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
percent
17-64
17.5 SINR
17.5.1 Flow Charts and Sampling Points
No chart.
17-65
Counter Name
Average UL SINR(Linear Value)
Short Name
RRU.SINRMean
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 1. Range 1: SINR <= -15.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Average value
17-66
Sampling Period
15 min
Unit
N/A
17.5.3.2 C373444760
Counter Name
Average UL SINR(DB Value)
Short Name
-
Counter Description
The counter provides the mean SINR of used PRB.
Triggering Point
When the eNodeB's PHY layer receives the UL data, measure the SINR on every used
PRB.
Refer to .
Update Description
The counter is updated by accumulating all the sample SINR and then dividing the sum
by the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
dB
17.5.3.3 C373444763
Counter Name
Number of PUCCH SINR less than or equal to -15 dB
17-67
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 1. Range 1: SINR <= -15.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.4 C373444764
Counter Name
Number of PUCCH SINR in the range of -14 to -12 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 2. Range 2: -15 < SINR <= -12.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
17-68
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.5 C373444765
Counter Name
Number of PUCCH SINR in the range of -11 to -9 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 3. Range 3: -12 < SINR <= -9.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
17-69
Sampling Period
15 min
Unit
times
17.5.3.6 C373444766
Counter Name
Number of PUCCH SINR in the range of -8 to -6 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 4. Range 4: -9 < SINR <= -6.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.7 C373444767
Counter Name
Number of PUCCH SINR in the range of -5 to -3 dB
17-70
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 5. Range 5: -6 < SINR <= -3.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.8 C373444768
Counter Name
Number of PUCCH SINR in the range of -2 to 0 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 6. Range 6: -3 < SINR <= 0.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
17-71
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.9 C373444769
Counter Name
Number of PUCCH SINR in the range of 1 to 3 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 7. Range 7: 0 < SINR <= 3.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
17-72
Sampling Period
15 min
Unit
times
17.5.3.10 C373444770
Counter Name
Number of PUCCH SINR more than 3 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUCCH SINR falls in Range 8. Range 8: SINR > 3.
Triggering Point
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUCCH SINR falls in the specific
range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.11 C373444771
Counter Name
Number of PUSCH SINR less than or equal to -5 dB
17-73
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 1. Range 1: SINR <= -5.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.12 C373444772
Counter Name
Number of PUSCH SINR in the range of -4 to -2 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 2. Range 2: -5 < SINR <= -2.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
17-74
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.13 C373444773
Counter Name
Number of PUSCH SINR in the range of -1 to 2 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 3. Range 3: -2 < SINR <= 2.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
17-75
Sampling Period
15 min
Unit
times
17.5.3.14 C373444774
Counter Name
Number of PUSCH SINR in the range of 3 to 6 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 4. Range 4: 2 < SINR <= 6.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.15 C373444775
Counter Name
Number of PUSCH SINR in the range of 7 to 10 dB
17-76
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 5. Range 5: 6 < SINR <= 10.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.16 C373444776
Counter Name
Number of PUSCH SINR in the range of 11 to 14 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 6. Range 6: 10 < SINR <= 14.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
17-77
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.17 C373444777
Counter Name
Number of PUSCH SINR in the range of 15 to 17 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 7. Range 7: 14 < SINR <= 17.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
17-78
Sampling Period
15 min
Unit
times
17.5.3.18 C373444778
Counter Name
Number of PUSCH SINR more than 17 dB
Short Name
-
Counter Description
This counter counts the number of times that uplink services are scheduled when the
PUSCH SINR mapped to one RB falls in Range 8. Range 8: SINR > 17.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.5.3.19 C373444779
Counter Name
UL Scheduled RB Number of PUSCH SINR less than or equal to -5 dB
17-79
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 1. Range 1: SINR <= -5.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.5.3.20 C373444780
Counter Name
UL Scheduled RB Number of PUSCH SINR in the range of -4 to -2 dB
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 2. Range 2: -5 < SINR <= -2.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
17-80
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.5.3.21 C373444781
Counter Name
UL Scheduled RB Number of PUSCH SINR in the range of -1 to 2 dB
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 3. Range 3: -2 < SINR <= 2.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
17-81
Sampling Period
15 min
Unit
unit
17.5.3.22 C373444782
Counter Name
UL Scheduled RB Number of PUSCH SINR in the range of 3 to 6 dB
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 4. Range 4: 2 < SINR <= 6.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.5.3.23 C373444783
Counter Name
UL Scheduled RB Number of PUSCH SINR in the range of 7 to 10 dB
17-82
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 5. Range 5: 6 < SINR <= 10.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.5.3.24 C373444784
Counter Name
UL Scheduled RB Number of PUSCH SINR in the range of 11 to 14 dB
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 6. Range 2: 10 < SINR <= 14.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
17-83
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.5.3.25 C373444785
Counter Name
UL Scheduled RB Number of PUSCH SINR in the range of 15 to 17 dB
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 7. Range 2: 14 < SINR <= 17.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
17-84
Sampling Period
15 min
Unit
unit
17.5.3.26 C373444786
Counter Name
UL Scheduled RB Number of PUSCH SINR more than 17 dB
Short Name
-
Counter Description
This counter counts the number allocated RBs when the PUSCH SINR mapped to one RB
falls in Range 8. Range 8: SINR > 17.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the number of allocated RBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.5.3.27 C373444787
Counter Name
UL Scheduled TB Size of PUSCH SINR less than or equal to -5 dB
17-85
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 1. Range 1: SINR <= -5.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.5.3.28 C373444788
Counter Name
UL Scheduled TB Size of PUSCH SINR in the range of -4 to -2 dB
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 2. Range 2: -5 < SINR <= -2.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
17-86
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.5.3.29 C373444789
Counter Name
UL Scheduled TB Size of PUSCH SINR in the range of -1 to 2 dB
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 3. Range 3: -2 < SINR <= 2.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
17-87
Sampling Period
15 min
Unit
Kbit
17.5.3.30 C373444790
Counter Name
UL Scheduled TB Size of PUSCH SINR in the range of 3 to 6 dB
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 4. Range 4: 2 < SINR <= 6.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.5.3.31 C373444791
Counter Name
UL Scheduled TB Size of PUSCH SINR in the range of 7 to 10 dB
17-88
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 5. Range 2: 6 < SINR <= 10.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.5.3.32 C373444792
Counter Name
UL Scheduled TB Size of PUSCH SINR in the range of 11 to 14 dB
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 6. Range 6: 10 < SINR <= 14.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
17-89
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.5.3.33 C373444793
Counter Name
UL Scheduled TB Size of PUSCH SINR in the range of 15 to 17 dB
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 7. Range 7: 14 < SINR <= 17.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
17-90
Sampling Period
15 min
Unit
Kbit
17.5.3.34 C373444794
Counter Name
UL Scheduled TB Size of PUSCH SINR more than 17 dB
Short Name
-
Counter Description
This counter counts the sum of scheduled TBSize when the PUSCH SINR mapped to one
RB falls in Range 8. Range 8: SINR > 17.
Triggering Point
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules uplink services and the PUSCH SINR mapped to one RB
falls in the specific range, this counter is incremented by the scheduled TBSize.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17-91
17.6 BLER
17.6.1 Flow Charts and Sampling Points
Figure 17-2 BLER
17-92
Counter Name
Error Number of DL TBs
Short Name
TB.ErrNbrDl
Counter Description
After the eNodeB send a transport block to the UE, it will receive HARQ feedback
information from the UE. If the HARQ feedback is NACK or DTX, it is added to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE.
Refer to .
Update Description
The counter is incremented by 1 when eNB receives a NACK or DTX HARQ feedback.
Counter Type
Accumulated value
Sampling Period
15 min
17-93
Unit
unit
17.6.3.2 C373454801
Counter Name
Total Number of DL TBs
Short Name
TB.TotNbrDl
Counter Description
After the eNodeB send a transport block to the UE, it will receive HARQ feedback
information from the UE. No matter the HARQ feedback is ACK,NACK or DTX, it is added
to the counter.
Triggering Point
When eNodeB schedules a TB for DL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one TB for DL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.3 C373454802
Counter Name
Error Number of UL TBs
Short Name
TB.ErrNbrUl
17-94
Counter Description
After the eNodeB received a transport block from the UE, it will reply HARQ feedback
information to the UE. If the HARQ feedback is NACK or DTX, it is added to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE.
Refer to .
Update Description
The counter is incremented by 1 when eNB detectes a CRC
error TB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.4 C373454803
Counter Name
Total Number of UL TBs
Short Name
TB.TotNbrUl
Counter Description
After the eNodeB received a transport block from the UE, it will reply HARQ feedback
information to the UE. No matter the HARQ feedback is ACK,NACK or DTX, it is added to
the counter.
Triggering Point
When eNodeB schedules a TB for UL data.
Refer to .
17-95
Update Description
The counter is incremented by 1 when eNB schedules one TB
for UL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.5 C373454804
Counter Name
Error Number of DL Init TBs
Short Name
TB.InitErrNbrDl
Counter Description
After the eNodeB first send a transport block to the UE, it will receive HARQ feedback
information about the TB from the UE. If the HARQ feedback is NACK or DTX, it is added
to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE and the
TB is transmitted
Refer to .
Update Description
The counter is incremented by 1 when eNB receives a NACK
Counter Type
Accumulated value
17-96
Sampling Period
15 min
Unit
unit
17.6.3.6 C373454805
Counter Name
Total Number of DL Init TBs
Short Name
TB.InitTotNbrDl
Counter Description
After the eNodeB first send a transport block to the UE, it will receive HARQ feedback
information from the UE. No matter the HARQ feedback is ACK,NACK or DTX, it is added
to the counter.
Triggering Point
When eNodeB schedules a TB for DL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one init
TB for DL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.7 C373454806
Counter Name
Error Number of UL Init TBs
17-97
Short Name
TB.InitErrNbrUl
Counter Description
After the eNodeB first received a transport block from the UE, it will reply HARQ feedback
information to the UE. If the HARQ feedback is NACK or DTX, it is added to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE.
Refer to .
Update Description
The counter is incremented by 1 when eNB detectes a CRC
error init TB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.8 C373454807
Counter Name
Total Number of UL Init TBs
Short Name
TB.InitTotNbrUl
Counter Description
After the eNodeB first received a transport block from the UE, it will reply HARQ feedback
information to the UE. No matter the HARQ feedback is ACK,NACK or DTX, it is added to
the counter.
Triggering Point
When eNodeB schedules a TB for UL data.
17-98
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one init
TB for UL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.9 C373454808
Counter Name
Total Packets of UL TB Once Retransmission
Short Name
TB.ReTran1Ul
Counter Description
The counter provides the number of TB that eNB schedules one first retransmittion TB for
UL data.
Triggering Point
When eNB schedules one first retransmittion
TB for UL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one first retransmittion
TB for UL data.
Counter Type
Accumulated value
17-99
Sampling Period
15 min
Unit
unit
17.6.3.10 C373454809
Counter Name
Total Packets of DL TB Once Retransmission
Short Name
TB.ReTran1Dl
Counter Description
The counter provides the number of TB that eNB schedules one first retransmittion TB for
DL data.
Triggering Point
When eNB schedules one first retransmittion
TB for DL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one first retransmittion
TB for DL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-100
17.6.3.11 C373454810
Counter Name
Total Packets of UL TB Twice Retransmission
Short Name
TB.ReTran2Ul
Counter Description
The counter provides the number of TB that eNB schedules one second retransmittion TB
for UL data.
Triggering Point
When eNB schedules one second retransmittion
TB for UL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one second retransmittion
TB for UL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.12 C373454811
Counter Name
Total Packets of DL TB Twice Retransmission
Short Name
TB.ReTran2Dl
17-101
Counter Description
The counter provides the number of TB that eNB schedules one second retransmittion TB
for DL data.
Triggering Point
When eNB schedules one second retransmittion
TB for DL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one second retransmittion
TB for DL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.13 C373454812
Counter Name
Total Packets of UL TB Three Times Retransmission
Short Name
TB.ReTran3Ul
Counter Description
The counter provides the number of TB that eNB schedules one third retransmittion TB for
UL data.
Triggering Point
When eNB schedules one third retransmittion
TB for UL data.
Refer to .
17-102
Update Description
The counter is incremented by 1 when eNB schedules one third retransmittion
TB for UL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.14 C373454813
Counter Name
Total Packets of DL TB Three Times Retransmission
Short Name
TB.ReTran3Dl
Counter Description
The counter provides the number of TB that eNB schedules one third retransmition TB for
DL data.
Triggering Point
When eNB schedules one third retransmittion
TB for DL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one third retransmittion
TB for DL data.
Counter Type
Accumulated value
Sampling Period
15 min
17-103
Unit
unit
17.6.3.15 C373454814
Counter Name
Total Number of UL TB Remained Error Packets
Short Name
TB.RestUl
Counter Description
The counter provides the number of TB that eNB discards the TB for UL data.
Triggering Point
When eNB discards the
TB for UL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB discards the
TB for UL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.16 C373454815
Counter Name
Total Number of DL TB Remained Error Packets
Short Name
TB.RsetDl
17-104
Counter Description
The counter provides the number of TB that eNB discards the TB for DL data.
Triggering Point
When eNB discards the
TB for DL data.
Refer to .
Update Description
The counter is incremented by 1 when eNB discards the
TB for DL data.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.17 C373454818
Counter Name
Total Number of DL TBs that include RRC Release Msg
Short Name
TB.RrcRel.TotNbrDl
Counter Description
After the eNodeB sends a transmission block including the RRCConnectionRelease
message to the UE, it will receive HARQ feedback information from the UE. No matter
the HARQ feedback is ACK,NACK or DTX, it is added to the counter.
Triggering Point
When eNodeB schedules a TB for DL data and the RRCConnectionRelease message is
included in the TB
Refer to .
17-105
Update Description
The counter is incremented by 1 when eNodeB schedules a TB for DL data and the
RRCConnectionRelease message is included in the TB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.18 C373454819
Counter Name
Error Number of DL TBs that include RRC Release Msg
Short Name
TB.RrcRel.ErrNbrDl
Counter Description
After the eNodeB received a transport block including the RRCConnectionRelease
message from the UE, it will reply HARQ feedback information to the UE. If the HARQ
feedback is NACK or DTX, it is added to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE and the
RRCConnectionRelease message is included in the TB
Refer to .
Update Description
The counter is incremented by 1 when eNodeB receives a NACK or DTX indicating a faulty
receiption of TB by UE and the RRCConnectionRelease message is included in the TB.
Counter Type
Accumulated value
Sampling Period
15 min
17-106
Unit
unit
17.6.3.19 C373454820
Counter Name
Total Number of DL TBs that include RRC Reconfig Msg in HO
Short Name
TB.HoRrcRecfg.TotNbrDl
Counter Description
After the eNodeB sends a transmission block including the
RRCConnectionReconfiguration message for handover to the UE, it will receive HARQ
feedback information from the UE. No matter the HARQ feedback is ACK,NACK or
DTX, it is added to the counter.
Triggering Point
When eNodeB schedules a TB for DL data and the RRCConnectionReconfiguration
message for handover is included in the TB
Refer to .
Update Description
The counter is incremented by 1 when eNodeB schedules a TB for DL data and the
RRCConnectionReconfiguration message for handover is included in the TB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.20 C373454821
Counter Name
Error Number of DL TBs that include RRC Reconfig Msg in HO
17-107
Short Name
TB.HoRrcRecfg.ErrNbrDl
Counter Description
After the eNodeB received a transport block including the RRCConnectionReconfiguration
message for handover from the UE, it will reply HARQ feedback information to the UE. If
the HARQ feedback is NACK or DTX, it is added to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE and the
RRCConnectionReconfiguration message for handover is included in the TB
Refer to .
Update Description
The counter is incremented by 1 when eNodeB receives a NACK or DTX indicating a faulty
receiption of TB by UE and the RRCConnectionReconfiguration message for handover is
included in the TB.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.21 C373454837
Counter Name
Number of DL TBs with RI=1
Short Name
-
Counter Description
This counter counts the number of downlink RANK1 TBs transmitted by the cell, including
retransmitted TBs. When the eNodeB schedules downlink TBs, this counter is updated.
17-108
Triggering Point
When the eNodeB schedules downlink TBs, this counter is updated.
Refer to .
Update Description
This counter counts the number of downlink RANK1 TBs transmitted by the cell, including
retransmitted TBs. When the eNodeB schedules downlink TBs, this counter is incremented
by the number of corresponding TBs.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.6.3.22 C373454838
Counter Name
Number of DL TBs with RI=2
Short Name
-
Counter Description
This counter counts the number of downlink RANK2 TBs transmitted by the cell, including
retransmitted TBs. When the eNodeB schedules downlink TBs, this counter is updated.
Triggering Point
When the eNodeB schedules downlink TBs, this counter is updated.
Refer to .
Update Description
This counter counts the number of downlink RANK2 TBs transmitted by the cell, including
retransmitted TBs. When the eNodeB schedules downlink TBs, this counter is incremented
by the number of corresponding TBs.
17-109
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
Counter Name
Maximum DL User Number Scheduled Per TTI
Short Name
SAE.UEScheMax.DL
Counter Description
The value is obtained by sampling at a 1ms interval, the number of scheduled user on the
downlink and then taking the maximum.
17-110
Triggering Point
The eNodeB DL sheduler collects the number of sheduled UEs in DL per TTI.
Refer to .
Update Description
The counter is replaced with the current value when the current active state UEs is larger
than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
unit
17.7.3.2 C373384341
Counter Name
Maximum UL User Number Scheduled Per TTI
Short Name
SAE.UEScheMax.UL
Counter Description
The value is obtained by sampling at a 1ms interval, the number of scheduled user on the
uplink and then taking the maximum
Triggering Point
The eNodeB UL sheduler collects the number of sheduled UEs in UL per TTI.
Refer to .
Update Description
The counter is replaced with the current value when the current active state UEs is larger
than the prior at sampling point.
Counter Type
Maximum value
17-111
Sampling Period
1 ms
Unit
unit
17.7.3.3 C373384350
Counter Name
Total Number of UL Scheduled User
Short Name
-
Counter Description
The value is obtained by sampling at a 1ms interval, the total number of UL scheduled
user on the uplink and then taking the sum.
Triggering Point
The eNodeB UL sheduler collects the total number of sheduled UEs in UL.
Refer to .
Update Description
The counter is updated by accumulating all the sample active state UEs.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
unit
17.7.3.4 C373384351
Counter Name
Total Number of DL Scheduled User
17-112
Short Name
-
Counter Description
The value is obtained by sampling at a 1ms interval, the total number of DL scheduled
user on the downlink and then taking the sum.
Triggering Point
The eNodeB DL sheduler collects the total number of sheduled UEs in DL.
Refer to .
Update Description
The counter is updated by accumulating all the sample active state UEs.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
unit
17.8 CQI
17.8.1 Flow Charts and Sampling Points
CQI reporting is very fundamental in LTE AMR algorithm. CQI classes reported by UE are
CQI 0-15. The section offers the statics per CQI.
A subband is a set of k contiguous PRBs where k is a function of system bandwidth. Note
the last subband in set S may have fewer than k contiguous PRBs depending on NRBDL. The
number of subbands for system bandwidth given by NRBDL is defined by N=[NRBDL/k].The
subbands shall be indexed in the order of increasing frequency and non-increasing sizes
starting at the lowest frequency.
67 NA
810 2
1126 2
17-113
2763 3
64110 4
17-114
17-115
17-116
Counter Name
Number of CQI0 Be Used
Short Name
RRU.CQI0Mean
Counter Description
The counter provides the number of CQI0 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 0 from the UE feedback.
Refer to .
17-117
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI0 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.2 C373434701
Counter Name
Number of CQI1 Be Used
Short Name
RRU.CQI1Mean
Counter Description
The counter provides the number of CQI1 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 1 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
Counter Type
Accumulated value
Sampling Period
15 min
17-118
Unit
unit
17.8.3.3 C373434702
Counter Name
Number of CQI2 Be Used
Short Name
RRU.CQI2Mean
Counter Description
The counter provides the number of CQI2 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 2 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI2 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.4 C373434703
Counter Name
Number of CQI3 Be Used
Short Name
RRU.CQI3Mean
17-119
Counter Description
The counter provides the number of CQI3 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 3 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI3 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.5 C373434704
Counter Name
Number of CQI4 Be Used
Short Name
RRU.CQI4Mean
Counter Description
The counter provides the number of CQI4 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 4 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI4 Feedback information on the PUCCH from UE.
17-120
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.6 C373434705
Counter Name
Number of CQI5 Be Used
Short Name
RRU.CQI5Mean
Counter Description
The counter provides the number of CQI5 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 5 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI5 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-121
17.8.3.7 C373434706
Counter Name
Number of CQI6 Be Used
Short Name
RRU.CQI6Mean
Counter Description
The counter provides the number of CQI6 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 6 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI6 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.8 C373434707
Counter Name
Number of CQI7 Be Used
Short Name
RRU.CQI7Mean
Counter Description
The counter provides the number of CQI7 reported by UE.
17-122
Triggering Point
When the eNodeB receives the CQI value equal to 7 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI7 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.9 C373434708
Counter Name
Number of CQI8 Be Used
Short Name
RRU.CQI8Mean
Counter Description
The counter provides the number of CQI8 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 8 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI8 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
17-123
Sampling Period
15 min
Unit
unit
17.8.3.10 C373434709
Counter Name
Number of CQI9 Be Used
Short Name
RRU.CQI9Mean
Counter Description
The counter provides the number of CQI9 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 9 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI9 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.11 C373434710
Counter Name
Number of CQI10 Be Used
17-124
Short Name
RRU.CQI10Mean
Counter Description
The counter provides the number of CQI10 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 10 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI10 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.12 C373434711
Counter Name
Number of CQI11 Be Used
Short Name
RRU.CQI11Mean
Counter Description
The counter provides the number of CQI11 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 11 from the UE feedback.
Refer to .
17-125
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI11 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.13 C373434712
Counter Name
Number of CQI12 Be Used
Short Name
RRU.CQI12Mean
Counter Description
The counter provides the number of CQI12 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 12 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
Counter Type
Accumulated value
Sampling Period
15 min
17-126
Unit
unit
17.8.3.14 C373434713
Counter Name
Number of CQI13 Be Used
Short Name
RRU.CQI13Mean
Counter Description
The counter provides the number of CQI13 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 13 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI13 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.15 C373434714
Counter Name
Number of CQI14 Be Used
Short Name
RRU.CQI14Mean
17-127
Counter Description
The counter provides the number of CQI14 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 14 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI14 Feedback information on the PUCCH from UE.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.16 C373434715
Counter Name
Number of CQI15 Be Used
Short Name
RRU.CQI15Mean
Counter Description
The counter provides the number of CQI15 reported by UE.
Triggering Point
When the eNodeB receives the CQI value equal to 15 from the UE feedback.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB receives the
CQI15 Feedback information on the PUCCH from UE.
17-128
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.17 C373434716
Counter Name
Average CQI of Suband 0
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 0.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 0.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 0 CQI reported
by UEs within the measurement granularity period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17-129
17.8.3.18 C373434717
Counter Name
Average CQI of Suband 1
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 1.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 1.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 1 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.19 C373434718
Counter Name
Average CQI of Suband 2
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 2.
17-130
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 2.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 2 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.20 C373434719
Counter Name
Average CQI of Suband 3
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 3.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 3.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 3 CQI reported
by UEs within the measurement period.
Counter Type
Average value
17-131
Sampling Period
15 min
Unit
N/A
17.8.3.21 C373434720
Counter Name
Average CQI of Suband 4
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 4.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 4.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 4 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.22 C373434721
Counter Name
Average CQI of Suband 5
17-132
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 5.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 5.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 5 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.23 C373434722
Counter Name
Average CQI of Suband 6
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 6.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 6.
Refer to .
17-133
Update Description
The counter is obtained by computing the average value of the sub-band 6 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.24 C373434723
Counter Name
Average CQI of Suband 7
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 7.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 7.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 7 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17-134
17.8.3.25 C373434724
Counter Name
Average CQI of Suband 8
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 8.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 8.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 8 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.26 C373434725
Counter Name
Average CQI of Suband 9
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 9.
17-135
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 9.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 9 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.27 C373434726
Counter Name
Average CQI of Suband 10
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 10.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 10.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 10 CQI reported
by UEs within the measurement period.
Counter Type
Average value
17-136
Sampling Period
15 min
Unit
N/A
17.8.3.28 C373434727
Counter Name
Average CQI of Suband 11
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 11.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 11.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 11 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.29 C373434728
Counter Name
Average CQI of Suband 12
17-137
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 12.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 12.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 12 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.30 C373434729
Counter Name
Average CQI of Suband 13
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 13.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 13.
Refer to .
17-138
Update Description
The counter is obtained by computing the average value of the sub-band 13 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.31 C373434730
Counter Name
Average CQI of Suband 14
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 14.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 14.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 14 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17-139
17.8.3.32 C373434731
Counter Name
Average CQI of Suband 15
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 15.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 15.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 15 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.33 C373434732
Counter Name
Average CQI of Suband 16
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 16.
17-140
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 16.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 16 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.34 C373434733
Counter Name
Average CQI of Suband 17
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 17.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 17.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 17 CQI reported
by UEs within the measurement period.
Counter Type
Average value
17-141
Sampling Period
15 min
Unit
N/A
17.8.3.35 C373434734
Counter Name
Average CQI of Suband 18
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 18.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 18.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 18 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.36 C373434735
Counter Name
Average CQI of Suband 19
17-142
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 19.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 19.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 19 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.37 C373434736
Counter Name
Average CQI of Suband 20
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 20.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 20.
Refer to .
17-143
Update Description
The counter is obtained by computing the average value of the sub-band 20 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.38 C373434737
Counter Name
Average CQI of Suband 21
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 21.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 21.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 21 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17-144
17.8.3.39 C373434738
Counter Name
Average CQI of Suband 22
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 22.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 22.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 22 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.40 C373434739
Counter Name
Average CQI of Suband 23
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 23.
17-145
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 23.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 23 CQI reported
by UEs within the measurement period.
Counter Type
Average value
Sampling Period
15 min
Unit
N/A
17.8.3.41 C373434740
Counter Name
Average CQI of Suband 24
Short Name
-
Counter Description
The counter provides the average value of CQI reported by UE for sub-band 24.
Triggering Point
When the eNodeB receives the CQI value from the UE feedback in sub-band 24.
Refer to .
Update Description
The counter is obtained by computing the average value of the sub-band 24 CQI reported
by UEs within the measurement period.
Counter Type
Average value
17-146
Sampling Period
15 min
Unit
N/A
17.8.3.42 C374027200
Counter Name
Number of RANK2 CQI0 Be Used
Short Name
RRU.Rank2CQI0Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI0 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI0 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI0 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.43 C374027201
Counter Name
Number of RANK2 CQI1 Be Used
17-147
Short Name
RRU.Rank2CQI1Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI1 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI1 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI1 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.44 C374027202
Counter Name
Number of RANK2 CQI2 Be Used
Short Name
RRU.Rank2CQI2Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI2 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI2 (RI = 2) from the UE, this counter is updated.
Refer to .
17-148
Update Description
When the eNodeB receives CQI2 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.45 C374027203
Counter Name
Number of RANK2 CQI3 Be Used
Short Name
RRU.Rank2CQI3Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI3 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI3 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI3 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-149
17.8.3.46 C374027204
Counter Name
Number of RANK2 CQI4 Be Used
Short Name
RRU.Rank2CQI4Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI4 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI4 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI4 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.47 C374027205
Counter Name
Number of RANK2 CQI5 Be Used
Short Name
RRU.Rank2CQI5Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI5 (RI = 2) from the
UE.
17-150
Triggering Point
When the eNodeB receives CQI5 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI5 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.48 C374027206
Counter Name
Number of RANK2 CQI6 Be Used
Short Name
RRU.Rank2CQI6Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI6 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI6 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI6 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
17-151
Sampling Period
15 min
Unit
unit
17.8.3.49 C374027207
Counter Name
Number of RANK2 CQI7 Be Used
Short Name
RRU.Rank2CQI7Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI7 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI7 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI7 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.50 C374027208
Counter Name
Number of RANK2 CQI8 Be Used
17-152
Short Name
RRU.Rank2CQI8Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI8 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI8 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI8 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.51 C374027209
Counter Name
Number of RANK2 CQI9 Be Used
Short Name
RRU.Rank2CQI9Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI9 (RI = 2) from the
UE.
Triggering Point
When the eNodeB receives CQI9 (RI = 2) from the UE, this counter is updated.
Refer to .
17-153
Update Description
When the eNodeB receives CQI9 (RI = 2) from the UE, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.52 C374027210
Counter Name
Number of RANK2 CQI10 Be Used
Short Name
RRU.Rank2CQI10Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI10 (RI = 2) from
the UE.
Triggering Point
When the eNodeB receives CQI10 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI10 (RI = 2) from the UE, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-154
17.8.3.53 C374027211
Counter Name
Number of RANK2 CQI11 Be Used
Short Name
RRU.Rank2CQI11Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI11 (RI = 2) from
the UE.
Triggering Point
When the eNodeB receives CQI11 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI11 (RI = 2) from the UE, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.54 C374027212
Counter Name
Number of RANK2 CQI12 Be Used
Short Name
RRU.Rank2CQI12Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI12 (RI = 2) from
the UE.
17-155
Triggering Point
When the eNodeB receives CQI12 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI12 (RI = 2) from the UE, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.55 C374027213
Counter Name
Number of RANK2 CQI13 Be Used
Short Name
RRU.Rank2CQI13Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI13 (RI = 2) from
the UE.
Triggering Point
When the eNodeB receives CQI13 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI13 (RI = 2) from the UE, this counter is incremented by
one.
Counter Type
Accumulated value
17-156
Sampling Period
15 min
Unit
unit
17.8.3.56 C374027214
Counter Name
Number of RANK2 CQI14 Be Used
Short Name
RRU.Rank2CQI14Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI14 (RI = 2) from
the UE.
Triggering Point
When the eNodeB receives CQI14 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI14 (RI = 2) from the UE, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.57 C374027215
Counter Name
Number of RANK2 CQI15 Be Used
17-157
Short Name
RRU.Rank2CQI15Mean
Counter Description
This counter counts the number of times that the eNodeB receives CQI15 (RI = 2) from
the UE.
Triggering Point
When the eNodeB receives CQI15 (RI = 2) from the UE, this counter is updated.
Refer to .
Update Description
When the eNodeB receives CQI15 (RI = 2) from the UE, this counter is incremented by
one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.58 C374027216
Counter Name
DL Scheduled Number of CQI0
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI0. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI0, this counter is updated.
Refer to .
17-158
Update Description
When the eNodeB schedules users by using downlink CQI0, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.59 C374027217
Counter Name
DL Scheduled Number of CQI1
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI1. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI1, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI1, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
17-159
Unit
times
17.8.3.60 C374027218
Counter Name
DL Scheduled Number of CQI2
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI2. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI2, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI2, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.61 C374027219
Counter Name
DL Scheduled Number of CQI3
Short Name
-
17-160
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI3. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI3, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI3, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.62 C374027220
Counter Name
DL Scheduled Number of CQI4
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI4 The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI4, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI4, this counter is incremented
by one.
17-161
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.63 C374027221
Counter Name
DL Scheduled Number of CQI5
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI5. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI5, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI5, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-162
17.8.3.64 C374027222
Counter Name
DL Scheduled Number of CQI6
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI6. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI6, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI6, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.65 C374027223
Counter Name
DL Scheduled Number of CQI7
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI7. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
17-163
Triggering Point
When the eNodeB schedules users by using downlink CQI7, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI7, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.66 C374027224
Counter Name
DL Scheduled Number of CQI8
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI8. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI8, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI8, this counter is incremented
by one.
Counter Type
Accumulated value
17-164
Sampling Period
15 min
Unit
times
17.8.3.67 C374027225
Counter Name
DL Scheduled Number of CQI9
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI9. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI9, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI9, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.68 C374027226
Counter Name
DL Scheduled Number of CQI10
17-165
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI10. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI10, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI10, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.69 C374027227
Counter Name
DL Scheduled Number of CQI11
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI11. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI11, this counter is updated.
Refer to .
17-166
Update Description
When the eNodeB schedules users by using downlink CQI11, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.70 C374027228
Counter Name
DL Scheduled Number of CQI12
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI12. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI12, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI12, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
17-167
Unit
times
17.8.3.71 C374027229
Counter Name
DL Scheduled Number of CQI13
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI13. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI13, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI3, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.72 C374027230
Counter Name
DL Scheduled Number of CQI14
Short Name
-
17-168
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI14. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI14, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI14, this counter is incremented
by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.73 C374027231
Counter Name
DL Scheduled Number of CQI15
Short Name
-
Counter Description
This counter counts the total number of times that the eNodeB schedules users by using
CQI15. The CQIs (RI != 1) are mapped to CQIs (RI = 1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI15, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI15, this counter is incremented
by one.
17-169
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.8.3.74 C374027232
Counter Name
DL Scheduled RB Number of CQI0
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI0. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI0, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI0, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-170
17.8.3.75 C374027233
Counter Name
DL Scheduled RB Number of CQI1
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI1. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI1, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI1, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.76 C374027234
Counter Name
DL Scheduled RB Number of CQI2
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI2. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
17-171
Triggering Point
When the eNodeB schedules users by using downlink CQI2, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI2, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.77 C374027235
Counter Name
DL Scheduled RB Number of CQI3
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI3. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI3, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI3, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
17-172
Sampling Period
15 min
Unit
unit
17.8.3.78 C374027236
Counter Name
DL Scheduled RB Number of CQI4
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI4. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI4, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI4, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.79 C374027237
Counter Name
DL Scheduled RB Number of CQI5
17-173
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI5. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI5, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI5, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.80 C374027238
Counter Name
DL Scheduled RB Number of CQI6
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI6. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI6, this counter is updated.
Refer to .
17-174
Update Description
When the eNodeB schedules users by using downlink CQI6, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.81 C374027239
Counter Name
DL Scheduled RB Number of CQI7
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI7. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI7, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI7, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
17-175
Unit
unit
17.8.3.82 C374027240
Counter Name
DL Scheduled RB Number of CQI8
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI8. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI8, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI8, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.83 C374027241
Counter Name
DL Scheduled RB Number of CQI9
Short Name
-
17-176
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI9. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI9, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI9, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.84 C374027242
Counter Name
DL Scheduled RB Number of CQI10
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI10. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI10, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI10, this counter is incremented
to the number of RBs allocated to users.
17-177
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.85 C374027243
Counter Name
DL Scheduled RB Number of CQI11
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI11. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI11, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI11, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-178
17.8.3.86 C374027244
Counter Name
DL Scheduled RB Number of CQI12
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI12. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI12, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI12, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.87 C374027245
Counter Name
DL Scheduled RB Number of CQI13
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI13. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
17-179
Triggering Point
When the eNodeB schedules users by using downlink CQI13, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI13, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.88 C374027246
Counter Name
DL Scheduled RB Number of CQI14
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI14. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI14, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI14, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
17-180
Sampling Period
15 min
Unit
unit
17.8.3.89 C374027247
Counter Name
DL Scheduled RB Number of CQI15
Short Name
-
Counter Description
This counter counts the total number of RBs that the eNodeB schedules users by using
CQI15. The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm.
Triggering Point
When the eNodeB schedules users by using downlink CQI15, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI15, this counter is incremented
to the number of RBs allocated to users.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.8.3.90 C374027248
Counter Name
DL Scheduled TB Size of CQI0
17-181
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI0.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI0, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI0, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.91 C374027249
Counter Name
DL Scheduled TB Size of CQI1
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI1.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI1, this counter is updated.
Refer to .
17-182
Update Description
When the eNodeB schedules users by using downlink CQI1, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.92 C374027250
Counter Name
DL Scheduled TB Size of CQI2
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI2.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI2, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI2, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
17-183
Unit
Kbit
17.8.3.93 C374027251
Counter Name
DL Scheduled TB Size of CQI3
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI3.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI3, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI3, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.94 C374027252
Counter Name
DL Scheduled TB Size of CQI4
Short Name
-
17-184
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI4.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI4, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI4, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.95 C374027253
Counter Name
DL Scheduled TB Size of CQI5
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI5.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI5, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI5, this counter is incremented
to the scheduled data volume.
17-185
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.96 C374027254
Counter Name
DL Scheduled TB Size of CQI6
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI6.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI6, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI6, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17-186
17.8.3.97 C374027255
Counter Name
DL Scheduled TB Size of CQI7
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI7.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI7, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI7, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.98 C374027256
Counter Name
DL Scheduled TB Size of CQI8
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI8.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
17-187
Triggering Point
When the eNodeB schedules users by using downlink CQI8, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI8, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.99 C374027257
Counter Name
DL Scheduled TB Size of CQI9
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI9.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI9, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI9, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
17-188
Sampling Period
15 min
Unit
Kbit
17.8.3.100 C374027258
Counter Name
DL Scheduled TB Size of CQI10
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI10.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI10, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI10, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.101 C374027259
Counter Name
DL Scheduled TB Size of CQI11
17-189
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI11.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI11, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI11, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.102 C374027260
Counter Name
DL Scheduled TB Size of CQI12
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI12.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI12, this counter is updated.
Refer to .
17-190
Update Description
When the eNodeB schedules users by using downlink CQI12, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.103 C374027261
Counter Name
DL Scheduled TB Size of CQI13
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI13.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI13, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI13, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
17-191
Unit
Kbit
17.8.3.104 C374027262
Counter Name
DL Scheduled TB Size of CQI14
Short Name
-
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI14.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI14, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI14, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17.8.3.105 C374027263
Counter Name
DL Scheduled TB Size of CQI15
Short Name
-
17-192
Counter Description
This counter counts the total TB size that the eNodeB schedules users by using CQI15.
The CQIs (RI != 1) are mapped to CQIs (RI=1) by the algorithm
Triggering Point
When the eNodeB schedules users by using downlink CQI15, this counter is updated.
Refer to .
Update Description
When the eNodeB schedules users by using downlink CQI15, this counter is incremented
to the scheduled data volume.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
Kbit
17-193
Counter Name
Number of UL Init TBs with QPSK Modulation
Short Name
-
Counter Description
The counter provides the number of init transport blocks based on QPSK modulation
schedule on the uplink.
Triggering Point
When the eNodeB schedule a init transport block based on QPSK modulation schedule
on the uplink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a init transport block based
on QPSK modulation schedule on the uplink.
17-194
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.2 C373454826
Counter Name
Number of UL Init TBs with 16QAM Modulation
Short Name
-
Counter Description
The counter provides the number of init transport blocks based on 16QAM modulation
schedule on the uplink.
Triggering Point
When the eNodeB schedule a init transport block based on 16QAM modulation schedule
on the uplink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a init transport block based
on 16QAM modulation schedule on the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-195
17.9.3.3 C373454827
Counter Name
Number of UL Init TBs with 64QAM Modulation
Short Name
-
Counter Description
The counter provides the number of init transport blocks based on 64QAM modulation
schedule on the uplink.
Triggering Point
When the eNodeB schedule a init transport block based on 64QAM modulation schedule
on the uplink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a init transport block based
on 64QAM modulation schedule on the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.4 C373454828
Counter Name
Number of Successful Transported UL Init TBs with QPSK Modulation
Short Name
-
17-196
Counter Description
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE,
this counter counts the number of initial QPSK TBs successfully received by the cell.
Triggering Point
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE,
this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE and
QPSK is used, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.5 C373454829
Counter Name
Number of Successful Transported UL Init TBs with 16QAM Modulation
Short Name
-
Counter Description
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE,
this counter counts the number of initial 16QAM TBs successfully received by the cell.
Triggering Point
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE,
this counter is updated.
Refer to .
17-197
Update Description
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE and
16QAM is used, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.6 C373454830
Counter Name
Number of Successful Transported UL Init TBs with 64QAM Modulation
Short Name
-
Counter Description
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE,
this counter counts the number of initial 64QAM TBs successfully received by the cell.
Triggering Point
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE,
this counter is updated.
Refer to .
Update Description
When the eNodeB uplink scheduler feeds HARQ ACK back for the initial TB to the UE and
64QAM is used, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
17-198
Unit
unit
17.9.3.7 C373454831
Counter Name
Number of DL Init TBs with QPSK Modulation
Short Name
-
Counter Description
The counter provides the number of init transport blocks based on QPSK modulation
schedule on the downlink.
Triggering Point
When the eNodeB schedule a init transport block based on QPSK modulation schedule
on the downlink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a init transport block based
on QPSK modulation schedule on the downlink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.8 C373454832
Counter Name
Number of DL Init TBs with 16QAM Modulation
Short Name
-
17-199
Counter Description
The counter provides the number of init transport blocks based on 16QAM modulation
schedule on the downlink.
Triggering Point
When the eNodeB schedule a init transport block based on 16QAM modulation schedule
on the downlink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a init transport block based
on 16QAM modulation schedule on the downlink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.9 C373454833
Counter Name
Number of DL Init TBs with 64QAM Modulation
Short Name
-
Counter Description
The counter provides the number of init transport blocks based on 64QAM modulation
schedule on the downlink.
Triggering Point
When the eNodeB schedule a init transport block based on 64QAM modulation schedule
on the downlink.
Refer to .
17-200
Update Description
The counter is incremented by 1 When the eNodeB schedule a init transport block based
on 64QAM modulation schedule on the downlink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.10 C373454834
Counter Name
Number of Successful Transported DL Init TBs with QPSK Modulation
Short Name
-
Counter Description
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE,
this counter is updated, this counter counts the number of initial QPSK TBs successfully
sent by the cell.
Triggering Point
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE,
this counter is updated
Refer to .
Update Description
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE
and QPSK is used, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
17-201
Unit
unit
17.9.3.11 C373454835
Counter Name
Number of Successful Transported DL Init TBs with 16QAM Modulation
Short Name
-
Counter Description
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE,
this counter is updated, this counter counts the number of initial 16QAM TBs successfully
sent by the cell.
Triggering Point
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE,
this counter is updated
Refer to .
Update Description
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE
and 16QAM is used, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.12 C373454836
Counter Name
Number of Successful Transported DL Init TBs with 64QAM Modulation
17-202
Short Name
-
Counter Description
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE,
this counter is updated, this counter counts the number of initial 64QAM TBs successfully
sent by the cell.
Triggering Point
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE,
this counter is updated
Refer to .
Update Description
When the eNodeB downlink scheduler receives HARQ ACK for the initial TB from the UE
and 64QAM is used, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.13 C373515500
Counter Name
Number of DL TBs with QPSK Modulation
Short Name
TB.QPSK.DL
Counter Description
The counter provides the number of transport blocks based on QPSK modulation schedule
on the downlink.
Triggering Point
When the eNodeB schedule a transport block based on QPSK
17-203
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on QPSK modulation schedule on the
downlink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.14 C373515501
Counter Name
Number of DL TBs with 16QAM Modulation
Short Name
TB.16QAM.DL
Counter Description
The counter provides the number of transport blocks based on 16QAM modulation
schedule on the downlink.
Triggering Point
When the eNodeB schedule a transport block based on 16QAM
modulation schedule on the downlink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on 16QAM modulation schedule on
the downlink.
17-204
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.15 C373515502
Counter Name
Number of DL TBs with 64QAM Modulation
Short Name
TB.64QAM.DL
Counter Description
The counter provides the number of transport blocks based on 64QAM modulation
schedule on the downlink.
Triggering Point
When the eNodeB schedule a transport block based on 64QAM
modulation schedule on the downlink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on 64QAM modulation schedule on
the downlink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-205
17.9.3.16 C373515503
Counter Name
Number of UL TBs with QPSK Modulation
Short Name
TB.QPSK.UL
Counter Description
The counter provides the number of transport blocks based on QPSK modulation schedule
on the uplink.
Triggering Point
When the eNodeB schedule a transport block based on QPSK
modulation schedule on the uplink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on QPSK modulation schedule on the
uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.17 C373515504
Counter Name
Number of UL TBs with 16QAM Modulation
Short Name
TB.16QAM.UL
17-206
Counter Description
The counter provides the number of transport blocks based on 16QAM modulation
schedule on the uplink.
Triggering Point
When the eNodeB schedule a transport block based on 16QAM
modulation schedule on the uplink.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on 16QAM modulation schedule on
the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.9.3.18 C373515505
Counter Name
Number of UL TBs with 64QAM Modulation
Short Name
TB.64QAM.UL
Counter Description
The counter provides the number of transport blocks based on 64QAM modulation
schedule on the uplink.
Triggering Point
When the eNodeB schedule a transport block based on 64QAM
modulation schedule on the uplink.
Refer to .
17-207
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on 64QAM modulation schedule on
the uplink.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
10 C373515593 Scheduled Number of PDSCH with TM4 RI=1 and Tx-Div Mode
17-208
13 C373515596 Scheduled Number of PDSCH with TM6 RI=1 and Tx-Div Mode
Counter Name
Scheduled Number of PDSCH with TM1 Mode
Short Name
TB.TM1
Counter Description
The counter provides the number of transport blocks based on TM1 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM1
MIMO mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM1 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
17-209
Unit
unit
17.10.3.2 C373515507
Counter Name
Scheduled Number of PDSCH with TM2 Mode
Short Name
TB.TM2
Counter Description
The counter provides the number of transport blocks based on TM2 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM2
MIMO mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM2 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.3 C373515508
Counter Name
Scheduled Number of PDSCH with TM3 Mode
17-210
Short Name
TB.TM3
Counter Description
The counter provides the number of transport blocks based on TM3 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM3
MIMO mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM3 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.4 C373515509
Counter Name
Scheduled Number of PDSCH with TM4 Mode
Short Name
TB.TM4
Counter Description
The counter provides the number of transport blocks based on TM4 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM4
17-211
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM4 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.5 C373515510
Counter Name
Scheduled Number of PDSCH with TM5 Mode
Short Name
TB.TM5
Counter Description
The counter provides the number of transport blocks based on TM5 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM5
MIMO mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM5 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
17-212
Sampling Period
15 min
Unit
unit
17.10.3.6 C373515511
Counter Name
Scheduled Number of PDSCH with TM6 Mode
Short Name
TB.TM6
Counter Description
The counter provides the number of transport blocks based on TM6 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM6
MIMO mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM6 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-213
17.10.3.7 C373515512
Counter Name
Scheduled Number of PDSCH with TM7 Mode
Short Name
TB.TM7
Counter Description
The counter provides the number of transport blocks based on TM7 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM7
MIMO mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM7 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.8 C373515591
Counter Name
Scheduled Number of PDSCH with TM3 RI=1 Mode
Short Name
TB.TM3.RI1
17-214
Counter Description
The counter provides the number of transport blocks based on TM3 RI=1 mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM3
RI=1 mode in PDSCH channel..
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM3 RI=1 mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.9 C373515592
Counter Name
Scheduled Number of PDSCH with TM3 RI=2 Mode
Short Name
TB.TM3.RI2
Counter Description
The counter provides the number of transport blocks based on TM3 RI=2 mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM3
RI=2 mode in PDSCH channel.
Refer to .
17-215
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM3 RI=2 mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.10 C373515593
Counter Name
Scheduled Number of PDSCH with TM4 RI=1 and Tx-Div Mode
Short Name
TB.TM4.RI1TxDiv
Counter Description
The counter provides the number of transport blocks based on TM4 RI=1 Tx-DIV mode in
PDSCH channel.
Triggering Point
When the eNodeB schedule a transport block based on TM4
RI=1 Tx-DIV mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on TM4 RI=1 Tx-DIV mode in PDSCH
channel.
Counter Type
Accumulated value
17-216
Sampling Period
15 min
Unit
unit
17.10.3.11 C373515594
Counter Name
Scheduled Number of PDSCH with TM4 RI=1 and SM Mode
Short Name
TB.TM4.RI1SM
Counter Description
The counter provides the number of transport blocks based on TM4 RI=1 SM mode in
PDSCH channel.
Triggering Point
When the eNodeB schedule a transport block based on TM4
RI=1 SM mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on TM4 RI=1 SM mode in PDSCH
channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-217
17.10.3.12 C373515595
Counter Name
Scheduled Number of PDSCH with TM4 RI=2 Mode
Short Name
TB.TM4.RI2
Counter Description
The counter provides the number of transport blocks based on TM4 RI=2 mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM4
RI=2 mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM4 RI=2 mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.13 C373515596
Counter Name
Scheduled Number of PDSCH with TM6 RI=1 and Tx-Div Mode
Short Name
TB.TM6.RI1TxDiv
17-218
Counter Description
The counter provides the number of transport blocks based on TM6 RI=1 mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM6
RI=1 mode in PDSCH channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a
transport block based on TM6 RI=1 mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.14 C373515597
Counter Name
Scheduled Number of PDSCH with TM6 RI=1 and SM Mode
Short Name
TB.TM6.RI1SM
Counter Description
The counter provides the number of transport blocks based on TM6 RI=1 SM mode in
PDSCH channel.
Triggering Point
When the eNodeB schedule a transport block based on TM6
RI=1 mode in PDSCH channeWhen the eNodeB schedule
a transport block based on TM6 RI=1 SM mode in PDSCH
channel.
17-219
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule
a transport block based on TM6 RI=1 SM mode in PDSCH
channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.15 C373515598
Counter Name
Scheduled Number of PDSCH with TM8 Mode
Short Name
TB.TM8
Counter Description
The counter provides the number of transport blocks based on TM8 MIMO mode in PDSCH
channel.
Triggering Point
When the eNodeB schedule a transport block based on TM8 MIMO mode in PDSCH
channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a transport block based on
TM8 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
17-220
Sampling Period
15 min
Unit
unit
17.10.3.16 C373515601
Counter Name
Scheduled Number of PDSCH with TM8 RI=1 Mode
Short Name
TB.TM8
Counter Description
The counter provides the number of transport blocks based on TM8 RI=1 MIMO mode in
PDSCH channel.
Triggering Point
When the eNodeB schedule a transport block based on TM8 RI=1 MIMO mode in PDSCH
channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a transport block based on
TM8 RI=1 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.10.3.17 C373515602
Counter Name
Scheduled Number of PDSCH with TM8 RI=2 Mode
17-221
Short Name
TB.TM8
Counter Description
The counter provides the number of transport blocks based on TM8 RI=2 MIMO mode in
PDSCH channel.
Triggering Point
When the eNodeB schedule a transport block based on TM8 RI=2 MIMO mode in PDSCH
channel.
Refer to .
Update Description
The counter is incremented by 1 When the eNodeB schedule a transport block based on
TM8 RI=2 MIMO mode in PDSCH channel.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
Search space
UE-specific 1 6
2 12
4 8
8 16
17-222
Common 4 16
8 16
Counter Name
Number of CCE Aggregation Level 1
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 1 for PDCCH.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 1 for PDCCH
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 1 for PDCCH.
17-223
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.11.3.2 C373424644
Counter Name
Number of CCE Aggregation Level 2
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 2 for PDCCH.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 2 for PDCCH.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 2 for PDCCH.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-224
17.11.3.3 C373424645
Counter Name
Number of CCE Aggregation Level 4
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 4 for PDCCH.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 4 for PDCCH.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 4 for PDCCH.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.11.3.4 C373424646
Counter Name
Number of CCE Aggregation Level 8
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 8 for PDCCH.
17-225
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 8 for PDCCH.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 8 for PDCCH.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.11.3.5 C373424672
Counter Name
DTX Number of CCE Aggregation Level 1
Short Name
-
Counter Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, it means that DTX is detected. This counter counts the number of times
that DTX is detected when CCE aggregation level 1 is used. This counter includes the
number of times that CCE aggregation level 1 is used by uplink DCI0 and downlink DCI,
but does not include that of SIB.
Triggering Point
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is updated.
Refer to .
Update Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is incremented by one.
17-226
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.11.3.6 C373424673
Counter Name
DTX Number of CCE Aggregation Level 2
Short Name
-
Counter Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, it means that DTX is detected. This counter counts the number of times
that DTX is detected when CCE aggregation level 2 is used. This counter includes the
number of times that CCE aggregation level 2 is used by uplink DCI0 and downlink DCI,
but does not include that of SIB.
Triggering Point
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is updated.
Refer to .
Update Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
17-227
Unit
times
17.11.3.7 C373424674
Counter Name
DTX Number of CCE Aggregation Level 4
Short Name
-
Counter Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, it means that DTX is detected. This counter counts the number of times
that DTX is detected when CCE aggregation level 4 is used. This counter includes the
number of times that CCE aggregation level 4 is used by uplink DCI0 and downlink DCI,
but does not include that of SIB.
Triggering Point
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is updated.
Refer to .
Update Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.11.3.8 C373424675
Counter Name
DTX Number of CCE Aggregation Level 8
17-228
Short Name
-
Counter Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, it means that DTX is detected. This counter counts the number of times
that DTX is detected when CCE aggregation level 8 is used. This counter includes the
number of times that CCE aggregation level 8 is used by uplink DCI0 and downlink DCI,
but does not include that of SIB.
Triggering Point
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is updated.
Refer to .
Update Description
For a DCI sent by the eNodeB, if the UE does not reply with ACK or NACK, or does not
send uplink data, this counter is incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12 TA
17.12.1 Flow Charts and Sampling Points
Upon reception of a timing advance command, the UE shall adjust its uplink transmission
timing for PUCCH/PUSCH/SRS. The timing advance command indicates the change of
the uplink timing relative to the current uplink timing as multiples of 16Ts.
In case of random access response, 11-bit timing advance command [8], TA, indicates NTA
values by index values ofTA = 0, 1, 2, ..., 1282, where an amount of the time alignment is
given by NTA = TA x 16.
17-229
17-230
Counter Name
Report Times of TA Value in the range of 0 to 1
Short Name
TA.Range1
Counter Description
The counter provides the number of TA value which ranges between 0 and 1 in message2
transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 0 and 1.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 0 and 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.2 C373556401
Counter Name
Report Times of TA Value in the range of 1 to 3
Short Name
TA.Range2
17-231
Counter Description
The counter provides the number of TA value which ranges between 2 and 3 in message2
transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 2 and 3.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 2 and 3.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.3 C373556402
Counter Name
Report Times of TA Value in the range of 3 to 5
Short Name
TA.Range3
Counter Description
The counter provides the number of TA value which ranges between 4 and 5 in message2
transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 4 and 5.
Refer to .
17-232
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 4 and 5.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.4 C373556403
Counter Name
Report Times of TA Value in the range of 5 to 7
Short Name
TA.Range4
Counter Description
The counter provides the number of TA value which ranges between 6 and 7 in message2
transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 6 and 7.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 6 and 7.
Counter Type
Accumulated value
Sampling Period
15 min
17-233
Unit
times
17.12.3.5 C373556404
Counter Name
Report Times of TA Value in the range of 7 to 9
Short Name
TA.Range5
Counter Description
The counter provides the number of TA value which ranges between 8 and 9 in message2
transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 8 and 9.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 8 and 9.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.6 C373556405
Counter Name
Report Times of TA Value in the range of 9 to 11
Short Name
TA.Range6
17-234
Counter Description
The counter provides the number of TA value which ranges between 10 and 11 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 10 and 11.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 10 and 11.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.7 C373556406
Counter Name
Report Times of TA Value in the range of 11 to 13
Short Name
TA.Range7
Counter Description
The counter provides the number of TA value which ranges between 12 and 13 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 12 and 13.
Refer to .
17-235
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 12 and 13.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.8 C373556407
Counter Name
Report Times of TA Value in the range of 13 to 20
Short Name
TA.Range8
Counter Description
The counter provides the number of TA value which ranges between 14 and 20 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 14 and 20.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 14 and 20.
Counter Type
Accumulated value
Sampling Period
15 min
17-236
Unit
times
17.12.3.9 C373556408
Counter Name
Report Times of TA Value in the range of 20 to 27
Short Name
TA.Range9
Counter Description
The counter provides the number of TA value which ranges between 21 and 27 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 21 and 27.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 21 and 27.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.10 C373556409
Counter Name
Report Times of TA Value in the range of 27 to 34
Short Name
TA.Range10
17-237
Counter Description
The counter provides the number of TA value which ranges between 28 and 34 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 28 and 34.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 28 and 34.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.11 C373556410
Counter Name
Report Times of TA Value in the range of 34 to 40
Short Name
TA.Range11
Counter Description
The counter provides the number of TA value which ranges between 35 and 40 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 35 and 40.
Refer to .
17-238
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 35 and 40.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.12 C373556411
Counter Name
Report Times of TA Value in the range of 40 to 50
Short Name
TA.Range12
Counter Description
The counter provides the number of TA value which ranges between 41 and 50 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 41 and 50.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 41 and 50.
Counter Type
Accumulated value
Sampling Period
15 min
17-239
Unit
times
17.12.3.13 C373556412
Counter Name
Report Times of TA Value in the range of 50 to 81
Short Name
TA.Range13
Counter Description
The counter provides the number of TA value which ranges between 51 and 80 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 51 and 80.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 51 and 80.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.14 C373556413
Counter Name
Report Times of TA Value in the range of 81 to 129
Short Name
TA.Range14
17-240
Counter Description
The counter provides the number of TA value which ranges between 81 and MAX in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 81 and Max.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 81 and Max.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.15 C373556414
Counter Name
Maximum of TA Value
Short Name
TA.Max
Counter Description
When the eNodeB sends the message2 to the UE, the TA value is includes in the
message2. The counter provides the maximum of TA value in message2.
Triggering Point
When the eNodeB sends the message2 to the UE
Refer to .
17-241
Update Description
The counter is replaced with the current value when the current TA value is larger than the
prior at sampling point.
Counter Type
Maximum value
Sampling Period
15 min
Unit
16Ts
17.12.3.16 C373556415
Counter Name
Report Times of TA Value in the range of 129 to 179
Short Name
TA.Range15
Counter Description
The counter provides the number of TA value which ranges between 129 and 179 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 129 and 179.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 129 and 179.
Counter Type
Accumulated value
Sampling Period
15 min
17-242
Unit
times
17.12.3.17 C373556416
Counter Name
Report Times of TA Value in the range of 179 to 256
Short Name
TA.Range16
Counter Description
The counter provides the number of TA value which ranges between 179 and 256 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 179 and 256.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 179 and 256.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.18 C373556417
Counter Name
Report Times of TA Value in the range of 256 to 384
Short Name
TA.Range17
17-243
Counter Description
The counter provides the number of TA value which ranges between 256 and 384 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 256 and 384.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 256 and 384.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.19 C373556418
Counter Name
Report Times of TA Value in the range of 384 to 512
Short Name
TA.Range18
Counter Description
The counter provides the number of TA value which ranges between 384 and 512 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 384 and 512.
Refer to .
17-244
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 384 and 512.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.20 C373556419
Counter Name
Report Times of TA Value in the range of 512 to 640
Short Name
TA.Range19
Counter Description
The counter provides the number of TA value which ranges between 512 and 640 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 512 and 640.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 512 and 640.
Counter Type
Accumulated value
Sampling Period
15 min
17-245
Unit
times
17.12.3.21 C373556420
Counter Name
Report Times of TA Value in the range of 640 to 769
Short Name
TA.Range20
Counter Description
The counter provides the number of TA value which ranges between 640 and 769 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 640 and 769.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 640 and 769.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.22 C373556421
Counter Name
Report Times of TA Value in the range of 769 to 897
Short Name
TA.Range21
17-246
Counter Description
The counter provides the number of TA value which ranges between 769 and 897 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 769 and 897.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 769 and 897.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.23 C373556422
Counter Name
Report Times of TA Value in the range of 897 to 1025
Short Name
TA.Range22
Counter Description
The counter provides the number of TA value which ranges between 897 and 1025 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 897 and 1025.
Refer to .
17-247
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 897 and 1025.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.12.3.24 C373556423
Counter Name
Report Times of TA Value in the range of 1025 to 1153
Short Name
TA.Range23
Counter Description
The counter provides the number of TA value which ranges between 1025 and 1153 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 1025 and 1153.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 1025 and 1153.
Counter Type
Accumulated value
Sampling Period
15 min
17-248
Unit
times
17.12.3.25 C373556424
Counter Name
Report Times of TA Value in the range of 1153 to 1282
Short Name
TA.Range24
Counter Description
The counter provides the number of TA value which ranges between 1153 and 1282 in
message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Triggering Point
When the eNodeB sends the message2 to the UE and the TA absolute value therein ranges
between 1153 and 1282.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the message2 to the UE and
the TA absolute value therein ranges between 1153 and 1282.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.13 Msg2/Msg3
17.13.1 Flow Charts and Sampling Points
No chart.
17-249
Counter Name
Number of Successful Msg3 Checked by ENB
Short Name
-
Counter Description
The counter provides the number of successful msg3 checked by eNodeB.
Triggering Point
When the eNodeB checks the msg3 successfully.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB checks the msg3 successfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
17-250
17.13.3.2 C373444756
Counter Name
Number of Lossed Msg3 Checked by ENB
Short Name
-
Counter Description
The counter provides the number of lossed msg3 checked by eNodeB.
Triggering Point
When the eNodeB checks the msg3 unsuccessfully.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB checks the msg3 unsuccessfully.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
17.13.3.3 C373444759
Counter Name
Number of Sended Msg2 by ENB
Short Name
-
Counter Description
The counter provides the number of the message2 transmitted by eNodeB to UE.
Triggering Point
When the eNodeB sends the messag2 to the UE
17-251
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the messag2 to the UE.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
17.14 NI
17.14.1 Flow Charts and Sampling Points
No chart.
17-252
17-253
17-254
17-255
17-256
17-257
17-258
Counter Name
RB0 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.2 C373586701
Counter Name
RB1 Maximum NI
Short Name
-
17-259
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.3 C373586702
Counter Name
RB2 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-260
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.4 C373586703
Counter Name
RB3 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-261
17.14.3.5 C373586704
Counter Name
RB4 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.6 C373586705
Counter Name
RB5 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-262
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.7 C373586706
Counter Name
RB6 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-263
Sampling Period
1 ms
Unit
dBm
17.14.3.8 C373586707
Counter Name
RB7 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.9 C373586708
Counter Name
RB8 Maximum NI
17-264
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.10 C373586709
Counter Name
RB9 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-265
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.11 C373586710
Counter Name
RB10 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-266
Unit
dBm
17.14.3.12 C373586711
Counter Name
RB11 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.13 C373586712
Counter Name
RB12 Maximum NI
Short Name
-
17-267
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.14 C373586713
Counter Name
RB13 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-268
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.15 C373586714
Counter Name
RB14 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-269
17.14.3.16 C373586715
Counter Name
RB15 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.17 C373586716
Counter Name
RB16 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-270
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.18 C373586717
Counter Name
RB17 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-271
Sampling Period
1 ms
Unit
dBm
17.14.3.19 C373586718
Counter Name
RB18 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.20 C373586719
Counter Name
RB19 Maximum NI
17-272
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.21 C373586720
Counter Name
RB20 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-273
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.22 C373586721
Counter Name
RB21 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-274
Unit
dBm
17.14.3.23 C373586722
Counter Name
RB22 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.24 C373586723
Counter Name
RB23 Maximum NI
Short Name
-
17-275
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.25 C373586724
Counter Name
RB24 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-276
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.26 C373586725
Counter Name
RB25 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-277
17.14.3.27 C373586726
Counter Name
RB26 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.28 C373586727
Counter Name
RB27 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-278
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.29 C373586728
Counter Name
RB28 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-279
Sampling Period
1 ms
Unit
dBm
17.14.3.30 C373586729
Counter Name
RB29 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.31 C373586730
Counter Name
RB30 Maximum NI
17-280
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.32 C373586731
Counter Name
RB31 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-281
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.33 C373586732
Counter Name
RB32 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-282
Unit
dBm
17.14.3.34 C373586733
Counter Name
RB33 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.35 C373586734
Counter Name
RB34 Maximum NI
Short Name
-
17-283
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.36 C373586735
Counter Name
RB35 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-284
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.37 C373586736
Counter Name
RB36 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-285
17.14.3.38 C373586737
Counter Name
RB37 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.39 C373586738
Counter Name
RB38 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-286
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.40 C373586739
Counter Name
RB39 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-287
Sampling Period
1 ms
Unit
dBm
17.14.3.41 C373586740
Counter Name
RB40 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.42 C373586741
Counter Name
RB41 Maximum NI
17-288
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.43 C373586742
Counter Name
RB42 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-289
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.44 C373586743
Counter Name
RB43 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-290
Unit
dBm
17.14.3.45 C373586744
Counter Name
RB44 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.46 C373586745
Counter Name
RB45 Maximum NI
Short Name
-
17-291
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.47 C373586746
Counter Name
RB46 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-292
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.48 C373586747
Counter Name
RB47 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-293
17.14.3.49 C373586748
Counter Name
RB48 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.50 C373586749
Counter Name
RB49 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-294
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.51 C373586750
Counter Name
RB50 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-295
Sampling Period
1 ms
Unit
dBm
17.14.3.52 C373586751
Counter Name
RB51 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.53 C373586752
Counter Name
RB52 Maximum NI
17-296
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.54 C373586753
Counter Name
RB53 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-297
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.55 C373586754
Counter Name
RB54 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-298
Unit
dBm
17.14.3.56 C373586755
Counter Name
RB55 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.57 C373586756
Counter Name
RB56 Maximum NI
Short Name
-
17-299
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.58 C373586757
Counter Name
RB57 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-300
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.59 C373586758
Counter Name
RB58 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-301
17.14.3.60 C373586759
Counter Name
RB59 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.61 C373586760
Counter Name
RB60 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-302
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.62 C373586761
Counter Name
RB61 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-303
Sampling Period
1 ms
Unit
dBm
17.14.3.63 C373586762
Counter Name
RB62 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.64 C373586763
Counter Name
RB63 Maximum NI
17-304
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.65 C373586764
Counter Name
RB64 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-305
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.66 C373586765
Counter Name
RB65 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-306
Unit
dBm
17.14.3.67 C373586766
Counter Name
RB66 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.68 C373586767
Counter Name
RB67 Maximum NI
Short Name
-
17-307
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.69 C373586768
Counter Name
RB68 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-308
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.70 C373586769
Counter Name
RB69 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-309
17.14.3.71 C373586770
Counter Name
RB70 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.72 C373586771
Counter Name
RB71 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-310
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.73 C373586772
Counter Name
RB72 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-311
Sampling Period
1 ms
Unit
dBm
17.14.3.74 C373586773
Counter Name
RB73 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.75 C373586774
Counter Name
RB74 Maximum NI
17-312
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.76 C373586775
Counter Name
RB75 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-313
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.77 C373586776
Counter Name
RB76 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-314
Unit
dBm
17.14.3.78 C373586777
Counter Name
RB77 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.79 C373586778
Counter Name
RB78 Maximum NI
Short Name
-
17-315
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.80 C373586779
Counter Name
RB79 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-316
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.81 C373586780
Counter Name
RB80 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-317
17.14.3.82 C373586781
Counter Name
RB81 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.83 C373586782
Counter Name
RB82 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-318
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.84 C373586783
Counter Name
RB83 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-319
Sampling Period
1 ms
Unit
dBm
17.14.3.85 C373586784
Counter Name
RB84 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.86 C373586785
Counter Name
RB85 Maximum NI
17-320
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.87 C373586786
Counter Name
RB86 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-321
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.88 C373586787
Counter Name
RB87 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-322
Unit
dBm
17.14.3.89 C373586788
Counter Name
RB88 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.90 C373586789
Counter Name
RB89 Maximum NI
Short Name
-
17-323
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.91 C373586790
Counter Name
RB90 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
17-324
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.92 C373586791
Counter Name
RB91 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17-325
17.14.3.93 C373586792
Counter Name
RB92 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.94 C373586793
Counter Name
RB93 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
17-326
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.95 C373586794
Counter Name
RB94 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
17-327
Sampling Period
1 ms
Unit
dBm
17.14.3.96 C373586795
Counter Name
RB95 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.97 C373586796
Counter Name
RB96 Maximum NI
17-328
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.98 C373586797
Counter Name
RB97 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-329
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.99 C373586798
Counter Name
RB98 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
17-330
Unit
dBm
17.14.3.100 C373586799
Counter Name
RB99 Maximum NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is replaced with the current value when the current NI of RBx(x=0,1,,99) is
larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
1 ms
Unit
dBm
17.14.3.101 C373586800
Counter Name
RB0 Average NI
Short Name
-
17-331
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.102 C373586801
Counter Name
RB1 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-332
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.103 C373586802
Counter Name
RB2 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-333
17.14.3.104 C373586803
Counter Name
RB3 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.105 C373586804
Counter Name
RB4 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-334
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.106 C373586805
Counter Name
RB5 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-335
Sampling Period
1 ms
Unit
dBm
17.14.3.107 C373586806
Counter Name
RB6 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.108 C373586807
Counter Name
RB7 Average NI
17-336
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.109 C373586808
Counter Name
RB8 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-337
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.110 C373586809
Counter Name
RB9 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-338
Unit
dBm
17.14.3.111 C373586810
Counter Name
RB10 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.112 C373586811
Counter Name
RB11 Average NI
Short Name
-
17-339
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.113 C373586812
Counter Name
RB12 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-340
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.114 C373586813
Counter Name
RB13 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-341
17.14.3.115 C373586814
Counter Name
RB14 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.116 C373586815
Counter Name
RB15 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-342
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.117 C373586816
Counter Name
RB16 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-343
Sampling Period
1 ms
Unit
dBm
17.14.3.118 C373586817
Counter Name
RB17 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.119 C373586818
Counter Name
RB18 Average NI
17-344
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.120 C373586819
Counter Name
RB19 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-345
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.121 C373586820
Counter Name
RB20 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-346
Unit
dBm
17.14.3.122 C373586821
Counter Name
RB21 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.123 C373586822
Counter Name
RB22 Average NI
Short Name
-
17-347
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.124 C373586823
Counter Name
RB23 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-348
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.125 C373586824
Counter Name
RB24 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-349
17.14.3.126 C373586825
Counter Name
RB25 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.127 C373586826
Counter Name
RB26 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-350
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.128 C373586827
Counter Name
RB27 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-351
Sampling Period
1 ms
Unit
dBm
17.14.3.129 C373586828
Counter Name
RB28 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.130 C373586829
Counter Name
RB29 Average NI
17-352
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.131 C373586830
Counter Name
RB30 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-353
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.132 C373586831
Counter Name
RB31 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-354
Unit
dBm
17.14.3.133 C373586832
Counter Name
RB32 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.134 C373586833
Counter Name
RB33 Average NI
Short Name
-
17-355
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.135 C373586834
Counter Name
RB34 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-356
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.136 C373586835
Counter Name
RB35 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-357
17.14.3.137 C373586836
Counter Name
RB36 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.138 C373586837
Counter Name
RB37 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-358
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.139 C373586838
Counter Name
RB38 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-359
Sampling Period
1 ms
Unit
dBm
17.14.3.140 C373586839
Counter Name
RB39 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.141 C373586840
Counter Name
RB40 Average NI
17-360
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.142 C373586841
Counter Name
RB41 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-361
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.143 C373586842
Counter Name
RB42 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-362
Unit
dBm
17.14.3.144 C373586843
Counter Name
RB43 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.145 C373586844
Counter Name
RB44 Average NI
Short Name
-
17-363
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.146 C373586845
Counter Name
RB45 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-364
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.147 C373586846
Counter Name
RB46 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-365
17.14.3.148 C373586847
Counter Name
RB47 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.149 C373586848
Counter Name
RB48 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-366
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.150 C373586849
Counter Name
RB49 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-367
Sampling Period
1 ms
Unit
dBm
17.14.3.151 C373586850
Counter Name
RB50 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.152 C373586851
Counter Name
RB51 Average NI
17-368
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.153 C373586852
Counter Name
RB52 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-369
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.154 C373586853
Counter Name
RB53 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-370
Unit
dBm
17.14.3.155 C373586854
Counter Name
RB54 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.156 C373586855
Counter Name
RB55 Average NI
Short Name
-
17-371
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.157 C373586856
Counter Name
RB56 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-372
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.158 C373586857
Counter Name
RB57 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-373
17.14.3.159 C373586858
Counter Name
RB58 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.160 C373586859
Counter Name
RB59 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-374
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.161 C373586860
Counter Name
RB60 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-375
Sampling Period
1 ms
Unit
dBm
17.14.3.162 C373586861
Counter Name
RB61 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.163 C373586862
Counter Name
RB62 Average NI
17-376
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.164 C373586863
Counter Name
RB63 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-377
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.165 C373586864
Counter Name
RB64 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-378
Unit
dBm
17.14.3.166 C373586865
Counter Name
RB65 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.167 C373586866
Counter Name
RB66 Average NI
Short Name
-
17-379
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.168 C373586867
Counter Name
RB67 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-380
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.169 C373586868
Counter Name
RB68 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-381
17.14.3.170 C373586869
Counter Name
RB69 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.171 C373586870
Counter Name
RB70 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-382
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.172 C373586871
Counter Name
RB71 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-383
Sampling Period
1 ms
Unit
dBm
17.14.3.173 C373586872
Counter Name
RB72 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.174 C373586873
Counter Name
RB73 Average NI
17-384
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.175 C373586874
Counter Name
RB74 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-385
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.176 C373586875
Counter Name
RB75 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-386
Unit
dBm
17.14.3.177 C373586876
Counter Name
RB76 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.178 C373586877
Counter Name
RB77 Average NI
Short Name
-
17-387
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.179 C373586878
Counter Name
RB78 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-388
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.180 C373586879
Counter Name
RB79 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-389
17.14.3.181 C373586880
Counter Name
RB80 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.182 C373586881
Counter Name
RB81 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-390
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.183 C373586882
Counter Name
RB82 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-391
Sampling Period
1 ms
Unit
dBm
17.14.3.184 C373586883
Counter Name
RB83 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.185 C373586884
Counter Name
RB84 Average NI
17-392
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.186 C373586885
Counter Name
RB85 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-393
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.187 C373586886
Counter Name
RB86 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-394
Unit
dBm
17.14.3.188 C373586887
Counter Name
RB87 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.189 C373586888
Counter Name
RB88 Average NI
Short Name
-
17-395
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.190 C373586889
Counter Name
RB89 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
17-396
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.191 C373586890
Counter Name
RB90 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17-397
17.14.3.192 C373586891
Counter Name
RB91 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.193 C373586892
Counter Name
RB92 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
17-398
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.194 C373586893
Counter Name
RB93 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
17-399
Sampling Period
1 ms
Unit
dBm
17.14.3.195 C373586894
Counter Name
RB94 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.196 C373586895
Counter Name
RB95 Average NI
17-400
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.197 C373586896
Counter Name
RB96 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
17-401
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.198 C373586897
Counter Name
RB97 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
17-402
Unit
dBm
17.14.3.199 C373586898
Counter Name
RB98 Average NI
Short Name
-
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.14.3.200 C373586899
Counter Name
RB99 Average NI
Short Name
-
17-403
Counter Description
When the eNodeB receives the UL data from the UE, PHY detect the NI of
RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the sampling value.
Triggering Point
When the eNodeB receives the UL data from the UE.
Refer to .
Update Description
The counter is updated by accumulating all the sampling NI of RBx(x=0,1,,99), and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1 ms
Unit
dBm
17.15 ICIC
17.15.1 Flow Charts and Sampling Points
No chart.
17-404
17-405
Counter Name
Average Number of Cell Edge Users
Short Name
-
Counter Description
The active state indicates the user is always active if the short DRX is configured to UE.
And if the long DRX is configured to UE, the user is active when having traffic and DRX high
level.Otherwise the user is inactive.The counter provides the average value of all sampling
point in the measurement period.
17-406
Triggering Point
The eNodeB sheduler collects the number of UEs which is "active state" at sampling time
in cell edge.
Refer to .
Update Description
The counter is updated by accumulating all the sample active state UEs, and then dividing
the sum by the measurement period.
Counter Type
Average value
Sampling Period
100 ms
Unit
unit
17.15.3.2 C373566451
Counter Name
Average Throughput of DL PHY on Edge Area
Short Name
-
Counter Description
Downlink PHY Traffic on the Sampling Point = the size of TBs.That includes retransmission
TBs.The counter takes the average value of all sampling granularities in the statistical
period.
Triggering Point
When the eNodeB physical layer sends data to the air in cell edge.
Refer to .
Update Description
The counter is updated by accumulating all the sampling physical layer volume, and then
dividing the sum by the measurement period.
17-407
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
17.15.3.3 C373566452
Counter Name
Average Throughput of UL PHY on Edge Area
Short Name
-
Counter Description
Uplink PHY traffic on the sampling point = the size of TBs. That includes retransmission
TBs.The counter takes the average value of all sampling granularities in the statistical
period.
Triggering Point
When the eNodeB physical layer receives data from the air in cell edge.
Refer to .
Update Description
The counter is updated by accumulating all the sampling physical layer volume, and then
dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
1s
Unit
Kbps
17-408
17.15.3.4 C373566453
Counter Name
PRB Number of PDSCH for Cell Edge Users
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for PDSCH on the downlink in cell
edge..
Triggering Point
When eNodeB downlink scheduler schedule TB and assign the PRB in PDSCH channe in
cell edge..
Refer to .
Update Description
The counter is increased by the PRB number used for PDSCH
channel at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.15.3.5 C373566454
Counter Name
PRB Number of PUSCH for Cell Edge Users
Short Name
-
Counter Description
It is all available PRBs that eNodeB have assigned for PUSCH on the uplink in cell edge..
17-409
Triggering Point
When eNodeB uplink scheduler schedule TB and assign the PRB in PUSCH channel in
cell edge.
Refer to .
Update Description
The counter is increased by the assigned PRB number for PUSCH at sampling point.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.15.3.6 C373566455
Counter Name
Number of CCE Aggregation Level 1 on Edge Area
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 1 for PDCCH in cell edge.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 1 for PDCCH in cell
edge
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 1 for PDCCH in cell edge.
Counter Type
Accumulated value
17-410
Sampling Period
15 min
Unit
times
17.15.3.7 C373566456
Counter Name
Number of CCE Aggregation Level 2 on Edge Area
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 2 for PDCCH in cell edge.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 2 for PDCCH in cell
edge
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 2 for PDCCH in cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.8 C373566457
Counter Name
Number of CCE Aggregation Level 4 on Edge Area
17-411
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 4 for PDCCH in cell edge.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 4 for PDCCH in cell
edge
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 4 for PDCCH in cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.9 C373566458
Counter Name
Number of CCE Aggregation Level 8 on Edge Area
Short Name
-
Counter Description
The counter provides the number of CCE aggregation level 8 for PDCCH in cell edge.
Triggering Point
When the eNodeB DL scheduler allocates the CCE aggregation level 8 for PDCCH in cell
edge
Refer to .
17-412
Update Description
The counter is incremented by 1 when the eNodeB DL scheduler allocates the CCE
aggregation level 8 for PDCCH in cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.10 C373566459
Counter Name
Number of DL TBs on Edge Area
Short Name
-
Counter Description
After the eNodeB send a transport block to the UE, it will receive HARQ feedback
information from the UE. If the HARQ feedback is NACK or DTX in cell edge, it is added
to the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE in cell
edge.
Refer to .
Update Description
The counter is incremented by 1 when eNB receives a NACK or DTX HARQ feedback in
cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
17-413
Unit
unit
17.15.3.11 C373566460
Counter Name
Error Number of DL TBs on Edge Area
Short Name
-
Counter Description
After the eNodeB send a transport block to the UE, it will receive HARQ feedback
information from the UE. No matter the HARQ feedback is ACK,NACK or DTX in cell
edge, it is added to the counter.
Triggering Point
When eNodeB schedules a TB for DL data in cell edge.
Refer to .
Update Description
The counter is incremented by 1 when eNB schedules one TB for DL data in cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.15.3.12 C373566461
Counter Name
Number of UL TBs on Edge Area
Short Name
-
17-414
Counter Description
After the eNodeB received a transport block from the UE, it will reply HARQ feedback
information to the UE. If the HARQ feedback is NACK or DTX in cell edge, it is added to
the counter.
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE in cell
edge.
Refer to .
Update Description
The counter is incremented by 1 when eNB detectes a CRC
error TB in cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.15.3.13 C373566462
Counter Name
Error Number of UL TBs on Edge Area
Short Name
-
Counter Description
After the eNodeB received a transport block from the UE, it will reply HARQ feedback
information to the UE. No matter the HARQ feedback is ACK,NACK or DTX in cell edge,
it is added to the counter.
Triggering Point
When eNodeB schedules a TB for UL data in cell edge.
Refer to .
17-415
Update Description
The counter is incremented by 1 when eNB schedules one TB
for UL data in cell edge.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.15.3.14 C373566463
Counter Name
Percentage of RNTP beyond the Threshold in the range of 0 to 5
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (0% to 5%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 0% to 5%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
17-416
Unit
times
17.15.3.15 C373566464
Counter Name
Percentage of RNTP beyond the Threshold in the range of 6 to 10
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (6% to 10%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 6% to 10%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.16 C373566465
Counter Name
Percentage of RNTP beyond the Threshold in the range of 11 to 15
17-417
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (11% to 15%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 11% to 15%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.17 C373566466
Counter Name
Percentage of RNTP beyond the Threshold in the range of 16 to 20
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (16% to 20%) that exceeds the threshold.
17-418
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 16% to 20%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.18 C373566467
Counter Name
Percentage of RNTP beyond the Threshold in the range of 21 to 25
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (21% to 25%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 21% to 25%, the counter is
incremented by 1.
17-419
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.19 C373566468
Counter Name
Percentage of RNTP beyond the Threshold in the range of 26 to 30
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (26% to 30%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 26% to 30%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-420
17.15.3.20 C373566469
Counter Name
Percentage of RNTP beyond the Threshold in the range of 31 to 35
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (31% to 35%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 31% to 35%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.21 C373566470
Counter Name
Percentage of RNTP beyond the Threshold in the range of 36 to 40
Short Name
-
17-421
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (36% to 40%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 36% to 40%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.22 C373566471
Counter Name
Percentage of RNTP beyond the Threshold in the range of 41 to 45
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (41% to 45%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
17-422
Update Description
When the being 1 percentage of RNTP bitmap is in range of 41% to 45%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.23 C373566472
Counter Name
Percentage of RNTP beyond the Threshold in the range of 46 to 50
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (46% to 50%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 46% to 50%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
17-423
Unit
times
17.15.3.24 C373566473
Counter Name
Percentage of RNTP beyond the Threshold in the range of 51 to 55
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (51% to 55%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 51% to 55%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.25 C373566474
Counter Name
Percentage of RNTP beyond the Threshold in the range of 56 to 60
17-424
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (56% to 60%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 56% to 60%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.26 C373566475
Counter Name
Percentage of RNTP beyond the Threshold in the range of 61 to 65
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (61% to 65%) that exceeds the threshold.
17-425
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 61% to 65%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.27 C373566476
Counter Name
Percentage of RNTP beyond the Threshold in the range of 66 to 70
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (66% to 70%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 66% to 70%, the counter is
incremented by 1.
17-426
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.28 C373566477
Counter Name
Percentage of RNTP beyond the Threshold in the range of 71 to 75
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (71% to 75%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 71% to 75%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-427
17.15.3.29 C373566478
Counter Name
Percentage of RNTP beyond the Threshold in the range of 76 to 80
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (76% to 80%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 76% to 80%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.30 C373566479
Counter Name
Percentage of RNTP beyond the Threshold in the range of 81 to 85
Short Name
-
17-428
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (81% to 85%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 81% to 85%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.31 C373566480
Counter Name
Percentage of RNTP beyond the Threshold in the range of 86 to 90
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (86% to 90%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
17-429
Update Description
When the being 1 percentage of RNTP bitmap is in range of 86% to 90%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.32 C373566481
Counter Name
Percentage of RNTP beyond the Threshold in the range of 91 to 95
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (91% to 95%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 91% to 95%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
17-430
Unit
times
17.15.3.33 C373566482
Counter Name
Percentage of RNTP beyond the Threshold in the range of 96 to 100
Short Name
-
Counter Description
If the Relative Narrowband Tx Power (RNTP) IE is received in the LOAD INFORMATION
message, it indicates, per PRB, whether downlink transmission power is lower than the
value indicated by the RNTP Threshold IE. The counter provides the number of the RNTP
percentage (96% to 100%) that exceeds the threshold.
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of RNTP bitmap is in range of 96% to 100%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.34 C373566483
Counter Name
Percentage of HII in the range of 0 to 5
17-431
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (0% to
5%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 0% to 5%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.35 C373566484
Counter Name
Percentage of HII in the range of 6 to 10
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
17-432
for the concerned PRBs. The counter provides the number of the HII percentage (6% to
10%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 6% to 10%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.36 C373566485
Counter Name
Percentage of HII in the range of 11 to 15
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (11% to
15%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
17-433
Update Description
When the being 1 percentage of HII bitmap is in range of 11% to 15%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.37 C373566486
Counter Name
Percentage of HII in the range of 16 to 20
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (16% to
20%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 16% to 20%, the counter is
incremented by 1.
Counter Type
Accumulated value
17-434
Sampling Period
15 min
Unit
times
17.15.3.38 C373566487
Counter Name
Percentage of HII in the range of 21 to 25
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (21% to
25%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 21% to 25%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-435
17.15.3.39 C373566488
Counter Name
Percentage of HII in the range of 26 to 30
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (26% to
30%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 26% to 30%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.40 C373566489
Counter Name
Percentage of HII in the range of 31 to 35
Short Name
-
17-436
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (31% to
35%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 31% to 35%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.41 C373566490
Counter Name
Percentage of HII in the range of 36 to 40
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (36% to
40%).
17-437
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 36% to 40%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.42 C373566491
Counter Name
Percentage of HII in the range of 41 to 45
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (41% to
45%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 41% to 45%, the counter is
incremented by 1.
17-438
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.43 C373566492
Counter Name
Percentage of HII in the range of 46 to 50
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (46% to
50%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 46% to 50%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-439
17.15.3.44 C373566493
Counter Name
Percentage of HII in the range of 51 to 55
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (51% to
55%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 51% to 55%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.45 C373566494
Counter Name
Percentage of HII in the range of 56 to 60
Short Name
-
17-440
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (56% to
60%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 56% to 60%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.46 C373566495
Counter Name
Percentage of HII in the range of 61 to 65
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (61% to
65%).
17-441
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 61% to 65%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.47 C373566496
Counter Name
Percentage of HII in the range of 66 to 70
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (66% to
70%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 66% to 70%, the counter is
incremented by 1.
17-442
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.48 C373566497
Counter Name
Percentage of HII in the range of 71 to 75
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (71% to
75%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 71% to 75%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-443
17.15.3.49 C373566498
Counter Name
Percentage of HII in the range of 76 to 80
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (76% to
80%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 76% to 80%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.50 C373566499
Counter Name
Percentage of HII in the range of 81 to 85
Short Name
-
17-444
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (81% to
85%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 81% to 85%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.51 C373566500
Counter Name
Percentage of HII in the range of 86 to 90
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (86% to
90%).
17-445
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 86% to 90%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.52 C373566501
Counter Name
Percentage of HII in the range of 91 to 95
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (91% to
95%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 91% to 95%, the counter is
incremented by 1.
17-446
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17.15.3.53 C373566502
Counter Name
Percentage of HII in the range of 96 to 100
Short Name
-
Counter Description
If the UL High Interference Indication IE is received in the LOAD INFORMATION message,
it indicates, per PRB, the occurrence of high interference sensitivity, as seen from the
sending eNB. The receiving eNB should try to avoid scheduling cell edge UEs in its cells
for the concerned PRBs. The counter provides the number of the HII percentage (96% to
100%).
Triggering Point
When the eNodeB sends the LOAD INFORMATION message to other eNodeBs
Refer to .
Update Description
When the being 1 percentage of HII bitmap is in range of 96% to 100%, the counter is
incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
17-447
17.15.3.54 C373566503
Counter Name
NI exceeds a threshold Time
Short Name
-
Counter Description
The eNodeB collet the NI of all RBs at sampling time and get the average NI about all RB.
If the average NI is larger the threshold,the counter is incremented by the sampling period.
Triggering Point
When the NI of RBs detected by eNodeB exceed the threshold
Refer to .
Update Description
When the NI of RBs detected by eNodeB exceed the threshold, the counter is incremented
by the sampling period.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
ms
17.15.3.55 C373566534
Counter Name
Average Active User Number of Heavy Load Cell Edge
Short Name
-
17-448
Counter Description
When the cell edge user quantity in Active state is equal to or greater than 50% of total
active user quantity in a cell, this cell is called a heavy-load cell. This counter counts the
number of cell edge users in Active state of a heavy-load cell.
Triggering Point
This counter counts the number of cell edge users in Active state of a heavy-load cell.
Refer to .
Update Description
This counter counts the average value of all the samples in a statistical period.
Counter Type
Average value
Sampling Period
15 min
Unit
unit
17.15.3.56 C373566535
Counter Name
UL Average Throughput of Heavy Load Cell Edge
Short Name
-
Counter Description
When the cell edge user quantity in Active state is equal to or greater than 50% of total
active user quantity in a cell, this cell is called a heavy-load cell. This counter counts the
uplink cell edge throughput of a heavy-load cell.
Triggering Point
This counter counts the uplink cell edge throughput of a heavy-load cell.
Refer to .
Update Description
This counter counts the average value of all the samples in a statistical period.
17-449
Counter Type
Average value
Sampling Period
15 min
Unit
Kbps
17.15.3.57 C373566536
Counter Name
DL Average Throughput of Heavy Load Cell Edge
Short Name
-
Counter Description
When the cell edge user quantity in Active state is equal to or greater than 50% of total
active user quantity in a cell, this cell is called a heavy-load cell. This counter counts the
downlink cell edge throughput of a heavy-load cell.
Triggering Point
This counter counts the downlink cell edge throughput of a heavy-load cell.
Refer to .
Update Description
This counter counts the average value of all the samples in a statistical period.
Counter Type
Average value
Sampling Period
15 min
Unit
Kbps
17-450
Counter Name
Number of TTI Bundling Activation Request
Short Name
-
Counter Description
The counter provides the number of TTI bundling activation requests.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message due to activate
the TTI bundling.
Refer to .
17-451
Update Description
The counter is increased by 1 when the eNodeB sends the
RRCConnectionReconfiguration message due to activate the TTI bundling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
17.16.3.2 C373424689
Counter Name
Number of TTI Bundling Activation Completed
Short Name
-
Counter Description
The counter provides the number of completed TTI bundling activations.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message for
TTI bundling activation completing.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message for TTI bundling activation
completing.
Counter Type
Accumulated value
Sampling Period
Event triggered
17-452
Unit
times
17.16.3.3 C373424690
Counter Name
Number of TTI Bundling Deactivation Request
Short Name
-
Counter Description
The counter provides the number of TTI bundling deactivation requests.
Triggering Point
When the eNodeB sends the RRCConnectionReconfiguration message due to deactivate
the TTI bundling.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB sends the
RRCConnectionReconfiguration message due to deactivate the TTI bundling.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
17.16.3.4 C373424691
Counter Name
Number of TTI Bundling Deactivation Completed
Short Name
-
17-453
Counter Description
The counter provides the number of completed TTI bundling deactivations.
Triggering Point
When the eNodeB receives the RRCConnectionReconfigurationComplete message for
TTI bundling deactivation completing.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB receives the
RRCConnectionReconfigurationComplete message for TTI bundling deactivation
completing.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
17.16.3.5 C373424692
Counter Name
Data Volume of Scheduled UE within the Threshold
Short Name
-
Counter Description
The counter provides the total volume of the scheduled UE within the threshold.
Triggering Point
When the eNodeB schedule a UE within the threshold.
Refer to .
Update Description
The counter is increased by the size of data volume when the eNodeB schedule a UE
within the threshold.
17-454
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
Kbit
17.16.3.6 C373424693
Counter Name
Number of Scheduled UE within the Threshold
Short Name
-
Counter Description
The counter provides the scheduled number of the UE within the threshold.
Triggering Point
When the eNodeB schedule a UE within the threshold.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB schedule a UE within the threshold.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
times
17-455
17.16.3.7 C373424694
Counter Name
Number of TTI Bundling Scheduled UE within the Threshold
Short Name
-
Counter Description
The counter provides the TTI bundling scheduled number of the UE within the threshold.
Triggering Point
When the eNodeB schedule a UE within the threshold in TTI bundling mode.
Refer to .
Update Description
The counter is increased by 1 when the eNodeB schedule a UE within the threshold in TTI
bundling mode.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
times
17.16.3.8 C373424695
Counter Name
Error Number of TB within the Threshold
Short Name
-
Counter Description
The counter provides the error number of the transport block within the threshold.
17-456
Triggering Point
When eNodeB receives a NACK or DTX indicating a faulty receiption of TB by UE within
the threshold.
Refer to .
Update Description
The counter is increased by 1 when eNodeB receives a NACK or DTX indicating a faulty
receiption of TB by UE within the threshold.
Counter Type
Accumulated value
Sampling Period
1 ms
Unit
unit
17.16.3.9 C373424696
Counter Name
Total Number of TB within the Threshold
Short Name
-
Counter Description
The counter provides the total number of the transport block within the threshold.
Triggering Point
When eNodeB schedules a TB for DL data within the threshold.
Refer to .
Update Description
The counter is increased by 1 when eNodeB schedules a TB for DL data within the
threshold.
Counter Type
Accumulated value
17-457
Sampling Period
1 ms
Unit
unit
17.17 Satisfaction
17.17.1 Flow Charts and Sampling Points
No chart.
Counter Name
Numerator of DL GBR Satisfaction for Edge User
17-458
Short Name
-
Counter Description
The GBR satisfaction of an LCH is a ratio of the actual transmission rate (correctly received)
to the configured GBR when the LCH is established. For an LCH, if the ratio of the actual
transmission rate to the configured GBR is higher than a threshold, the LCH satisfies the
GBR requirement. Otherwise, the LCH does not satisfy the GBR requirement. This counter
counts the number of LCHs that satisfy the GBR requirement, and is the numerator used
for calculating the GBR satisfaction of cell edge users.
Triggering Point
This counter counts the number of LCHs that satisfy the GBR requirement, and is the
numerator used for calculating the GBR satisfaction of cell edge users.
Refer to .
Update Description
This counter is incremented by the number of LCHs that satisfy the GBR requirement.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.2 C373596940
Counter Name
Denominator of DL GBR Satisfaction for Edge User
Short Name
-
Counter Description
This counter counts the number of LCHs of all the cell edge users that require GBR, and
is the denominator used for calculation the GBR satisfaction of cell edge users.
17-459
Triggering Point
This counter counts the number of LCHs of all the cell edge users that require GBR, and
is the denominator used for calculation the GBR satisfaction of cell edge users.
Refer to .
Update Description
This counter is incremented by the number of LCHs of all the cell edge users that require
GBR.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.3 C373596941
Counter Name
Numerator of DL PBR Satisfaction for Edge User
Short Name
-
Counter Description
The PBR satisfaction of an LCH is a ratio of the actual transmission rate (correctly received)
to the configured PBR when the LCH is established. For an LCH, if the ratio of the actual
transmission rate to the configured GBR is higher than a threshold, the LCH satisfies the
PBR requirement. Otherwise, the LCH does not satisfy the PBR requirement. This counter
counts the number of LCHs that satisfy the PBR requirement, and is the numerator used
for calculating the PBR satisfaction of cell edge users.
Triggering Point
This counter counts the number of LCHs that satisfy the GBR requirement, and is the
numerator used for calculating the PBR satisfaction of cell edge users.
Refer to .
17-460
Update Description
This counter is incremented by the number of LCHs that satisfy the PBR requirement.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.4 C373596942
Counter Name
Denominator of DL PBR Satisfaction for Edge User
Short Name
-
Counter Description
This counter counts the number of LCHs of all the cell edge users that require PBR, and
is the denominator used for calculation the PBR satisfaction of cell edge users.
Triggering Point
This counter counts the number of LCHs of all the cell edge users that require PBR, and
is the denominator used for calculation the PBR satisfaction of cell edge users.
Refer to .
Update Description
This counter is incremented by the number of LCHs of all the cell edge users that require
PBR.
Counter Type
Accumulated value
Sampling Period
15 min
17-461
Unit
unit
17.17.3.5 C373596943
Counter Name
Numerator of DL QCI1 GBR Satisfaction
Short Name
-
Counter Description
For Kn (a number) LCHs when QCI = n, the GBR satisfaction is calculated for each LCH. If
SatfyQCIn (a number) LCHs satisfy the GBR requirement, GbrSfyQCIn (GBR satisfaction
of QCIn LCHs) = SatfyQCIn/Kn. This counter counts the number of QCI1 LCHs that satisfy
the GBR requirement, and is the numerator used for calculating the GBR satisfaction of
QCI1 LCHs.
Triggering Point
This counter counts the number of QCI1 LCHs that satisfy the GBR requirement, and is
the numerator used for calculating the GBR satisfaction of QCI1 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI1 LCHs that satisfy the GBR requirement.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.6 C373596944
Counter Name
Denominator of DL QCI1 GBR Satisfaction
17-462
Short Name
-
Counter Description
This counter counts the number of QCI1 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI1 LCHs.
Triggering Point
This counter counts the number of QCI1 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI1 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI1 LCHs that require GBR.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.7 C373596945
Counter Name
Numerator of DL QCI2 GBR Satisfaction
Short Name
-
Counter Description
For Kn (a number) LCHs when QCI = n, the GBR satisfaction is calculated for each LCH. If
SatfyQCIn (a number) LCHs satisfy the GBR requirement, GbrSfyQCIn (GBR satisfaction
of QCIn LCHs) = SatfyQCIn/Kn. This counter counts the number of QCI2 LCHs that satisfy
the GBR requirement, and is the numerator used for calculating the GBR satisfaction of
QCI2 LCHs.
17-463
Triggering Point
This counter counts the number of QCI2 LCHs that satisfy the GBR requirement, and is
the numerator used for calculating the GBR satisfaction of QCI2 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI2 LCHs that satisfy the GBR requirement.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.8 C373596946
Counter Name
Denominator of DL QCI2 GBR Satisfaction
Short Name
-
Counter Description
This counter counts the number of QCI2 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI2 LCHs.
Triggering Point
This counter counts the number of QCI2 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI2 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI2 LCHs that require GBR.
Counter Type
Accumulated value
17-464
Sampling Period
15 min
Unit
unit
17.17.3.9 C373596947
Counter Name
Numerator of DL QCI3 GBR Satisfaction
Short Name
-
Counter Description
For Kn (a number) LCHs when QCI = n, the GBR satisfaction is calculated for each LCH. If
SatfyQCIn (a number) LCHs satisfy the GBR requirement, GbrSfyQCIn (GBR satisfaction
of QCIn LCHs) = SatfyQCIn/Kn. This counter counts the number of QCI3 LCHs that satisfy
the GBR requirement, and is the numerator used for calculating the GBR satisfaction of
QCI3 LCHs.
Triggering Point
This counter counts the number of QCI3 LCHs that satisfy the GBR requirement, and is
the numerator used for calculating the GBR satisfaction of QCI3 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI3 LCHs that satisfy the GBR requirement.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-465
17.17.3.10 C373596948
Counter Name
Denominator of DL QCI3 GBR Satisfaction
Short Name
-
Counter Description
This counter counts the number of QCI3 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI3 LCHs.
Triggering Point
This counter counts the number of QCI3 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI3 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI3 LCHs that require GBR.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.11 C373596949
Counter Name
Numerator of DL QCI4 GBR Satisfaction
Short Name
-
Counter Description
For Kn (a number) LCHs when QCI = n, the GBR satisfaction is calculated for each LCH. If
SatfyQCIn (a number) LCHs satisfy the GBR requirement, GbrSfyQCIn (GBR satisfaction
17-466
of QCIn LCHs) = SatfyQCIn/Kn. This counter counts the number of QCI4 LCHs that satisfy
the GBR requirement, and is the numerator used for calculating the GBR satisfaction of
QCI4 LCHs.
Triggering Point
This counter counts the number of QCI4 LCHs that satisfy the GBR requirement, and is
the numerator used for calculating the GBR satisfaction of QCI4 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI4 LCHs that satisfy the GBR requirement.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17.17.3.12 C373596950
Counter Name
Denominator of DL QCI4 GBR Satisfaction
Short Name
-
Counter Description
This counter counts the number of QCI4 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI4 LCHs.
Triggering Point
This counter counts the number of QCI4 LCHs that require GBR, and is the denominator
used for calculating the GBR satisfaction of QCI4 LCHs.
Refer to .
Update Description
This counter is incremented by the number of QCI4 LCHs that require GBR.
17-467
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
17-468
18.1 Paging
18.1.1 Flow Charts and Sampling Points
Figure 18-1 Paging
l Sampling Point 1: When the eNodeB receives the Paging message from the MME.
18-1
Counter Name
Number of Paging Records Received by the eNodeB
Short Name
PAG. TotalNbr
Counter Description
Reception of a S1AP PAGING message from MME,the eNodeB can be queued. When
each paging occasion reach, the paging will be transmitted. The repeat paging is included
to the counter.
Triggering Point
When the eNodeB receives the paging message from the MME.
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB receives the paging message from the
MME.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
18.1.3.2 C373394401
Counter Name
Number of Paging Records Discarded at the eNodeB
Short Name
PAG. DiscardedNbr
18-2
Counter Description
Reception of a S1AP PAGING message from MME,the eNodeB can be queued. When
each paging occasion reach, the paging will be transmitted. If the paging is discarded by
eNodeB at paging occasions,the counter records.
Triggering Point
When the eNodeB sends the paging message failures
Refer to .
Update Description
The counter is incremented by 1 when the eNodeB sends the paging message failures.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
18.1.3.3 C373394402
Counter Name
Number of Paging Records Congested at the eNodeB
Short Name
PAG. CongestedNbr
Counter Description
Reception of a S1AP PAGING message from MME,the eNodeB can be queued. When
each paging occasion reach, the paging will be transmitted. If the paging is congested by
eNodeB at paging occasions,the counter records.
Triggering Point
When the paging records that are congested at the eNodeB for paging occasions.
Refer to .
Update Description
The counter is incremented by 1 when the paging record congested for paging occasions.
18-3
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
18.1.3.4 C373394403
Counter Name
Number of Paging Records Send from eNodeB
Short Name
PAG. SendNbr
Counter Description
This counter counts the number of paging messages sent on the air interface, this counter
is updated.
Triggering Point
When the eNodeB sends a paging message on the air interface.
Refer to .
Update Description
When the eNodeB sends a paging message on the air interface, this counter is
incremented by one.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
18-4
18.1.3.5 C373394404
Counter Name
Paging Channel Capacity
Short Name
PAG. CapNbr
Counter Description
Based on the paging channel capacity table, the theoretical air interface paging channel
capacity in a cell equals the number of paging sub-frames times 16, where 16 is the
maximum paging number in each paging sub-frame specified by 3GPP and the number of
paging sub-frames = nB x 0.1 x total number of sub-frames in a statistical period.
Triggering Point
This counter counts the theoretical air interface paging channel capacity in a cell.
Refer to .
Update Description
This counter is updated to the latest theoretical air interface paging channel capacity in a
cell when being reported.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
unit
18-5
18-6
19-1
Counter Name
IP Pair Sending Maximum Throughput
Short Name
ENB.IpLinkSendThrouMax
Counter Description
At sampling time, the eNodeB collects the transport volume to assigning IP Pair on the
uplink from the previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Triggering Point
When the data is transmitted on the transmission layer IP pairs of eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current throughput of ip pair
transmitted by transport layer is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.1.3.2 C373840001
Counter Name
IP Pair Receiving Maximum Throughput
Short Name
ENB.IpLinkRecvThrouMax
19-2
Counter Description
At sampling time, the eNodeB collects the transport volume to assigning IP Pair on the
downlink from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Triggering Point
When the data is received on the transmission layer IP pairs of the
eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current received throughput in ip
pair is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.1.3.3 C373840002
Counter Name
IP Pair Sending Average Throughput
Short Name
ENB.IpLinkSendThrouMean
Counter Description
At sampling time, the eNodeB collects the transport volume to assigning IP Pair on the
uplink from the previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When the data is transmitted on the transmission layer IP pairs of
the eNodeB.
19-3
Refer to .
Update Description
The counter is updated by accumulating all the sample transmitted throughput in ip pair,
and then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.1.3.4 C373840003
Counter Name
IP Pair Receiving Average Throughput
Short Name
ENB.IpLinkRecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport volume to assigning IP Pair on the
downlink from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the data is received on the transmission layer IP pairs of the
eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample received throughput in ip pair, and
then dividing the sum by the measurement period.
Counter Type
Average value
19-4
Sampling Period
10 s
Unit
Mbps
19.1.3.5 C373840004
Counter Name
IP Pair Sending GTPU Average Throughput
Short Name
S1.OutNbrOctGtpU
Counter Description
At sampling time, the eNodeB collects the GTPU volume to assigning IP Pair on the uplink
that includes the IP header.The counter provides the average value of all sampling point
in the measurement period.
Triggering Point
When the data is transmitted on the transmission layer IP pairs of
the eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample transmitted throughput in ip pair,
and then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Kbps
19-5
19.1.3.6 C373840005
Counter Name
IP Pair Receiving GTPU Average Throughput
Short Name
S1.IncNbrOctGtpU
Counter Description
At sampling time, the eNodeB collects the GTPU volume to assigning IP Pair on the
downlink that includes the IP header.The counter provides the average value of all
sampling point in the measurement period.
Triggering Point
When the data is received on the transmission layer IP pairs of the
eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample received throughput in ip pair, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Kbps
19-6
Counter Name
IP Pair Vlan Sending Maximum Throughput
Short Name
ENB.IpVlanSendThrouMax
Counter Description
At sampling time, the eNodeB collects the UL transport volume to assigning Vlan on IP
Pair from the previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Triggering Point
When the data is transmitted on the current VLAN of the transmission
layer IP pairs of the eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current throughput of ip pair
transmitted by transport layer is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
19-7
Unit
Mbps
19.2.3.2 C373900001
Counter Name
IP Pair Vlan Receiving Maximum Throughput
Short Name
ENB.IpVlanRecvThrouMax
Counter Description
At sampling time, the eNodeB collects the DL transport volume to assigning Vlan on IP
Pairfrom the previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Triggering Point
When the data is received on the current VLAN of the transmission
layer IP pairs of the eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the the current received throughput
in ip pair is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.2.3.3 C373900002
Counter Name
IP Pair Vlan Sending Average Throughput
19-8
Short Name
ENB.IpVlanSendThrouMean
Counter Description
At sampling time, the eNodeB collects the UL transport volume to assigning Vlan on IP
Pair from the previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When the data is transmitted on the current VLAN of the transmission
layer IP pairs of the eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample transmitted throughput in ip pair,
and then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.2.3.4 C373900003
Counter Name
IP Pair Vlan Receiving Average Throughput
Short Name
ENB.IpVlanRecvThrouMean
Counter Description
At sampling time,the eNodeB collects the DL transport volume to assigning Vlan on IP Pair
on the downlink from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
19-9
Triggering Point
When the data is received on the current VLAN of the transmission
layer IP pairs of the eNodeB.
Refer to .
Update Description
The counter is updated by accumulating all the sample received throughput in ip pair, and
then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19-10
Counter Name
Dscp Sending Maximum Throughput
Short Name
ENB.IpDscpSendThrouMax
Counter Description
At sampling time, the eNodeB collects the UL transport volume to assigning DSCP on IP
Pair from the previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Triggering Point
When the data is transmitted on the current DSCP of the transmission
layer IP pairs of the eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the current throughput of ip pair
transmitted by transport layer is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.3.3.2 C373850001
Counter Name
Dscp Receiving Maximum Throughput
Short Name
ENB.IpDscpRecvThrouMax
19-11
Counter Description
At sampling time, the eNodeB collects the DL transport volume to assigning DSCP on IP
Pairfrom the previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Triggering Point
When the data is received on the current DSCP of the transmission
layer IP pairs of the eNodeB.
Refer to .
Update Description
The counter is replaced with the current value when the the current received throughput
in ip pair is larger than the prior at sampling point.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.3.3.3 C373850002
Counter Name
Dscp Sending Average Throughput
Short Name
ENB.IpDscpSendThrouMean
Counter Description
At sampling time, the eNodeB collects the UL transport volume to assigning DSCP on IP
Pair from the previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When the data is transmitted on the current DSCP of the transmission
layer IP pairs of the eNodeB.
19-12
Refer to .
Update Description
The counter is updated by accumulating all the sample transmitted throughput in ip pair,
and then dividing the sum by the measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.3.3.4 C373850003
Counter Name
Dscp Receiving Average Throughput
Short Name
ENB.IpDscpRecvThrouMean
Counter Description
At sampling time,the eNodeB collects the DL transport volume to assigning DSCP on IP
Pair on the downlink from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the data is received on the current DSCP of the transmission
Update Description
The counter is updated by accumulating all the sample received throughput in ip pair, and
then dividing the sum by the measurement period.
Counter Type
Average value
19-13
Sampling Period
10 s
Unit
Mbps
19-14
Counter Name
Control Plane Sending S1 Average Throughput
Short Name
ENB.TotCPS1SendThrouMean
Counter Description
At sampling time, the eNodeB collects the transport UL volume sent to the MME on SCTP
link from the previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB sends the signaling message in sctp link to the MME.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
19-15
Sampling Period
10 s
Unit
Mbps
19.4.3.2 C373930001
Counter Name
Control Plane Receiving S1 AverageThroughput
Short Name
ENB.TotCPS1RecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport DL volume received from the MME
on SCTP link from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB receives the signaling in sctp link from the MME.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.3 C373930002
Counter Name
Control Plane Sending X2 Average Throughput
19-16
Short Name
ENB.TotCPX2SendThrouMean
Counter Description
At sampling time, the eNodeB collects the transport UL volume sent to the target eNodeB
on SCTP link from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB sends the signaling in sctp link to another eNodeB.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.4 C373930003
Counter Name
Control Plane Receiving X2 Average Throughput
Short Name
ENB.TotCPX2RecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport DL volume received from the target
eNodeB on SCTP link from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB receives the signaling in sctp link from another eNodeB.
19-17
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.5 C373930004
Counter Name
Control Plane Sending OAM Average Throughput
Short Name
ENB.TotOAMSendThrouMean
Counter Description
At sampling time, the eNodeB collects the transport volume sent to the OMC from the
previous sampling time to the current sampling time. The counter provides the average
value of all sampling point in the measurement period.
Triggering Point
When the eNodeB sends the message to the OMC.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
19-18
Sampling Period
10 s
Unit
Mbps
19.4.3.6 C373930005
Counter Name
Control Plane Receiving OAM Average Throughput
Short Name
ENB.TotOAMRecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport volume received from the OMC on
SCTP link from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB receives the message from the OMC.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.7 C373930006
Counter Name
Control Plane Sending S1 Maximum Throughput
19-19
Short Name
ENB.TotCPS1SendThrouMax
Counter Description
At sampling time, the eNodeB collects the transport UL volume sent to the MME on SCTP
link from the previous sampling time to the current sampling time.The counter provides the
maximum value in the measurement period.
Triggering Point
When the eNodeB sends the signaling message in sctp link to the MME.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.8 C373930007
Counter Name
Control Plane Receiving S1 Maximum Throughput
Short Name
ENB.TotCPS1RecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport DL volume received from the MME
on SCTP link from the previous sampling time to the current sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the signaling in sctp link from the MME.
Refer to .
19-20
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.9 C373930008
Counter Name
Control Plane Sending X2 Maximum Throughput
Short Name
ENB.TotCPX2SendThrouMax
Counter Description
At sampling time, the eNodeB collects the transport UL volume sent to the target eNodeB
on SCTP link from the previous sampling time to the current sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB sends the signaling in sctp link to another eNodeB.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19-21
19.4.3.10 C373930009
Counter Name
Control Plane Receiving X2 Maximum Throughput
Short Name
ENB.TotCPX2RecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport DL volume received from the target
eNodeB on the downlink from the previous sampling time to the current sampling time.The
counter provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the signaling in sctp link from another eNodeB.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.11 C373930010
Counter Name
Control Plane Sending OAM Maximum Throughput
Short Name
ENB.TotOAMSendThrouMax
19-22
Counter Description
At sampling time, the eNodeB collects the transport volume sent to the OMC from the
previous sampling time to the current sampling time.The counter provides the maximum
value in the measurement period.
Triggering Point
When the eNodeB sends the message to the OMC.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.12 C373930011
Counter Name
Control Plane Receiving OAM Maximum Throughput
Short Name
ENB.TotOAMRecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport volume received from the OMC on
the downlink from the previous sampling time to the current sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
When the eNodeB receives the message from the OMC.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
19-23
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.13 C373930012
Counter Name
User Plane Sending S1 Average Throughput
Short Name
ENB.TotUPS1SendThrouMean
Counter Description
At sampling time, the eNodeB collects the transport traffic volume sent to the SGW on the
uplink from the previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Triggering Point
When there are user plane data transmitted from The eNodeB to the SGW.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19-24
19.4.3.14 C373930013
Counter Name
User Plane Receiving S1 Average Throughput
Short Name
ENB.TotUPS1RecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport traffic volume received from the SGW
on the downlink from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement period.
Triggering Point
When The eNodeB receives the user plane data from the SGW.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.15 C373930014
Counter Name
User Plane Sending X2 Average Throughput
Short Name
ENB.TotUPX2SendThrouMean
19-25
Counter Description
At sampling time, the eNodeB collects the transport traffic volume sent to the target
eNodeB on the uplink from the previous sampling time to the current sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When there are user plane data transmitted from the source eNodeB to the target eNodeB.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.16 C373930015
Counter Name
User Plane Receiving X2 Average Throughput
Short Name
ENB.TotUPX2RecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport traffic volume received from the target
eNodeB on the downlink from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the measurement period.
Triggering Point
When The eNodeB receives the data from another eNodeB.
Refer to .
19-26
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.17 C373930016
Counter Name
User Plane Sending Other Average Throughput
Short Name
ENB.TotUPOtherSendThrouMean
Counter Description
At sampling time, the eNodeB collects the transport other volume from the previous
sampling time to the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Triggering Point
When the eNodeB sends other data, which are not included in the S1/X2/OAM data.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
19-27
Unit
Mbps
19.4.3.18 C373930017
Counter Name
User Plane Receiving Other Average Throughput
Short Name
ENB.TotUPOtherRecvThrouMean
Counter Description
At sampling time, the eNodeB collects the transport other volume received on the downlink
from the previous sampling time to the current sampling time. The counter provides the
average value of all sampling point in the measurement period.
Triggering Point
When the eNodeB receives other data, which are not included in the S1/X2/OAM data.
Refer to .
Update Description
The counter is updated by calculating the average value of all of samling point in
measurement period.
Counter Type
Average value
Sampling Period
10 s
Unit
Mbps
19.4.3.19 C373930018
Counter Name
User Plane Sending S1 Maximum Throughput
Short Name
ENB.TotUPS1SendThrouMax
19-28
Counter Description
At sampling time, the eNodeB collects the transport volume sent to the SGW on the uplink
from the previous sampling time to the current sampling time.The counter provides the
maximum value in the measurement period.
Triggering Point
When there are user plane data transmitted from The eNodeB to the SGW.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.20 C373930019
Counter Name
User Plane Receiving S1 Maximum Throughput
Short Name
ENB.TotUPS1RecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport volume received from the SGW on
the downlink from the previous sampling time to the current sampling time.The counter
provides the maximum value in the measurement period.
Triggering Point
When The eNodeB receives the user plane data from the SGW.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
19-29
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.21 C373930020
Counter Name
User Plane Sending X2 Maximum Throughput
Short Name
ENB.TotUPX2SendThrouMax
Counter Description
At sampling time, the eNodeB collects the transport traffic volume sent to the target
eNodeB on the uplink from the previous sampling time to the current sampling time.The
counter provides the maximum value in the measurement period.
Triggering Point
When there are user plane data transmitted from The eNodeB to The eNodeB.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19-30
19.4.3.22 C373930021
Counter Name
User Plane Receiving X2 Maximum Throughput
Short Name
ENB.TotUPX2RecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport traffic volume received from the target
eNodeB on the downlink from the previous sampling time to the current sampling time.The
counter provides the maximum value in the measurement period.
Triggering Point
When The eNodeB receives the data from another eNodeB.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.23 C373930022
Counter Name
User Plane Sending Other Maximum Throughput
Short Name
ENB.TotUPOtherSendThrouMax
19-31
Counter Description
At sampling time, the eNodeB collects the transport other volume sent from the previous
sampling time to the current sampling time.The counter provides the maximum value in
the measurement period.
Triggering Point
When the eNodeB sends other data, which are not included in the S1/X2/OAM data.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.24 C373930023
Counter Name
User Plane Receiving Other Maximum Throughput
Short Name
ENB.TotUPOtherRecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport other volume received on the downlink
from the previous sampling time to the current sampling time.The counter provides the
maximum value in the measurement period.
Triggering Point
When the eNodeB receives other data, which are not included in the S1/X2/OAM data.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
19-32
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.25 C373930024
Counter Name
Maximum UL Total Throughput on Transport Layer
Short Name
ENB.TotUPSendThrouMax
Counter Description
At sampling time, the eNodeB collects the transport volume sent on the uplink from the
previous sampling time to the current sampling time.The counter provides the maximum
value in the measurement period.
Triggering Point
When The eNodeB receives the user plane data from the SGW
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19-33
19.4.3.26 C373930025
Counter Name
Maximum DL Total Throughput on Transport Layer
Short Name
ENB.TotUPRecvThrouMax
Counter Description
At sampling time, the eNodeB collects the transport volume received on the downlink
from the previous sampling time to the current sampling time.The counter provides the
maximum value in the measurement period.
Triggering Point
When there are user plane data transmitted from The eNodeB to
the SGW.
Refer to .
Update Description
The counter is replaced by the the current value when it is larger than the counter.
Counter Type
Maximum value
Sampling Period
10 s
Unit
Mbps
19.4.3.27 C373930026
Counter Name
DL Transport Bandwidth
Short Name
ENB.TransBandwidthDL
Counter Description
This counter indicates the configured Ethernet downlink transmission bandwidth.
19-34
Triggering Point
This counter indicates the configured Ethernet downlink transmission bandwidth.
Refer to .
Update Description
This counter is updated to the latest Ethernet downlink transmission bandwidth.
Counter Type
Current value
Sampling Period
10 s
Unit
Mbps
19.4.3.28 C373930027
Counter Name
UL Transport Bandwidth
Short Name
ENB.TransBBandwidthUL
Counter Description
This counter indicates the configured Ethernet uplink transmission bandwidth.
Triggering Point
This counter indicates the configured Ethernet uplink transmission bandwidth.
Refer to .
Update Description
This counter is updated to the latest Ethernet uplink transmission bandwidth.
Counter Type
Current value
Sampling Period
10 s
19-35
Unit
Mbps
Counter Name
Disconnection Times Per SCTP Link
Short Name
ENB.SctpLink.Down
Counter Description
The peirod heartbeat message will be send in the SCTP link.If the heartbeat is detected
abnormally, the eNodeB will report the link fault and statics the disconnection.
19-36
Triggering Point
When the SCTP link is detected breakdown.
Refer to .
Update Description
The counter is incremented by 1 when the SCTP link is detected breakdown.
Counter Type
Accumulated value
Sampling Period
Event triggered
Unit
times
19.5.3.2 C373920001
Counter Name
Sctp Link Service Time
Short Name
ENB.SctpLink.SrvTime
Counter Description
The sampling rule of SCTP link service time is as follows:
When the eNodeB successfully setup the SCTP link, record the start time; When the
eNodeB detect the SCTP link abnormal, record the end time.The SCTP link service time
is equal to the interval from the start time to the end time.
Triggering Point
The eNodeB collects the SCTP link service time at sampling time according to
"Explanation".
Refer to .
Update Description
The counter is incremented by the SCTP link service time at sampling point.
19-37
Counter Type
Accumulated value
Sampling Period
15 min
Unit
s
19.5.3.3 C373920002
Counter Name
Sctp Link Sending Data
Short Name
SIG.SctpDataChunkSent
Counter Description
The eNodeB transport layer sends the data chunk,but exclude retransmission data chunk.
Triggering Point
When the eNodeB sends a message to the MME or another eNodeB on sctp link
Refer to .
Update Description
When the eNodeB sends a message to the MME or another eNodeB on sctp link,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
19-38
19.5.3.4 C373920003
Counter Name
Sctp Link Receiving Data
Short Name
SIG.SctpDataChunkReceived
Counter Description
The eNodeB transport layer receives the data chunk.
Triggering Point
When the eNodeB receives a message from the MME or another eNodeB on sctp link
Refer to .
Update Description
When the eNodeB receives a message from the MME or another eNodeB on sctp link,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
19.5.3.5 C373920004
Counter Name
Sctp Link ReSending Data
Short Name
SIG.SctpDataChunkReSent
Counter Description
The eNodeB transport layer again send the data chunk,refering in particular to
retransmission data chunk.
19-39
Triggering Point
When the eNodeB again sends a DataChunk
Refer to .
Update Description
When the eNodeB again sends a message to the MME or another eNodeB on sctp link,the
counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
19.5.3.6 C373920005
Counter Name
Sctp Link Congestion Duration
Short Name
SIG.SctpCongestionDuration
Counter Description
The eNodeB transport layer detect the SCTP link congestion time.
Triggering Point
The eNodeB accumulate the SCTP link congestion time during measurement period.
Refer to .
Update Description
The eNodeB accumulate the SCTP link congestion time during measurement period.
Counter Type
Accumulated value
19-40
Sampling Period
15 min
Unit
s
19.5.3.7 C373920006
Counter Name
Sctp Link Congestion Times
Short Name
SIG.NbrSctpCongestion
Counter Description
The eNodeB transport layer detect the SCTP link congestion.
Triggering Point
When the eNodeB detects the sctp link congestion
Refer to .
Update Description
When the eNodeB detects the sctp link congestion,the counter is incremented by 1.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
times
19-41
disconnection times and the normal service time is reflected by the available time of OAM
link.
Counter Name
Disconnection Times Per OAM Link
Short Name
ENB.OAMLink.Down
Counter Description
The peirod heartbeat message will be send in the link between eNodeB and OMC. If
the heartbeat is detected abnormally, the eNodeB will report the link fault and statics the
disconnection.
Triggering Point
When the link between the eNodeB and the OMC is detected breakdown by eNodeB.
Refer to .
Update Description
The counter is incremented by 1 when the link between the eNodeB and the OMC is
detected breakdown by eNodeB.
Counter Type
Accumulated value
Sampling Period
Event triggered
19-42
Unit
times
19.6.3.2 C373950431
Counter Name
OAM Link Service Time
Short Name
ENB.OAMLink.SrvTime
Counter Description
The OAM link refer to the link from the eNodeB to the OMC.
Triggering Point
When the eNodeB successfully setup the OAM link, record the start time; When the
eNodeB detect the OAM link abnormal, record the end time.The OAM link service time is
equal to the interval from the start time to the end time.
Refer to .
Update Description
The counter is incremented by the OAM link service time at per measurement period.
Counter Type
Accumulated value
Sampling Period
15 min
Unit
s
19-43
19-44
Counter Name
Peak CPU Utilization Rate of ENB CC Board
Short Name
EQPT.MeanProcessorUsage.CCBoard
20-1
Counter Description
The CPU utilization rate refers to the ratio of the time of main cpu running and the total
time. The eNodeB collects the cpu usage at per sampling time. The counter provides the
maximum value in the measurement period.
Triggering Point
The eNodeB collects the cpu usage at sampling time.
Refer to .
Update Description
The counter is replaced with the new value when the CPU
utilization rate in a sampling point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
percent
20.1.3.2 C373940401
Counter Name
Average CPU Utilization Rate of ENB CC Board
Short Name
EQPT.PeakProcessorUsage.CCBoard
Counter Description
The CPU utilization rate refers to the ratio of the time of main cpu running and the total
time. The eNodeB collects the cpu usage at per sampling time. The counter provides the
average value of all sampling point in the measurement period.
Triggering Point
The eNodeB collects the cpu usage at sampling time.
Refer to .
20-2
Update Description
The counter is updated by the mean of CPU
utilization rate in measurement period.
Counter Type
Average value
Sampling Period
2s
Unit
percent
20.1.3.3 C373940402
Counter Name
Duration When CPU Load Is Higher Than Threshold
Short Name
EQPT.CpuOverLoadTime.CCBoard
Counter Description
The CPU utilization rate refers to the ratio of the time of main cpu running and the total
time. The eNodeB collects the cpu usage at per sampling time and compare it with the
threshold. If it is higher than the threshold, the counter is incremented by the sampling
period.
Triggering Point
When the CPU load is higher than the threshold at sampling time.
Refer to .
Update Description
The counter is incremented by time when the CPU load is higher.
Counter Type
Accumulated value
Sampling Period
2s
20-3
Unit
s
Counter Name
Peak Memory Utilization Rate of ENB CC Board
Short Name
EQPT.MeanMemoryUsage.CCBoard
Counter Description
The memory utilization rate refers to the ratio of the number of used memory and the total
number of memory. The eNodeB collects the memory usage at per sampling time. The
counter provides the maximum value in the measurement period.
Triggering Point
When the memory of eNodeB CC board runs.
Refer to .
20-4
Update Description
The counter is replaced with the new value when the memory utilization rate in a sampling
point is larger than the counter.
Counter Type
Maximum value
Sampling Period
2s
Unit
percent
20.2.3.2 C373940404
Counter Name
Average Memory Utilization Rate of ENB CC Board
Short Name
EQPT.PeakMemoryUsage.CCBoard
Counter Description
The memory utilization rate refers to the ratio of the number of used memory and the total
number of memory. The eNodeB collects the memory usage at per sampling time. The
counter provides the average value of all sampling point in the measurement period.
Triggering Point
When the memory of eNodeB CC board runs.
Refer to .
Update Description
The counter is updated by the mean of memory
utilization rate in measurement period.
Counter Type
Average value
Sampling Period
2s
20-5
Unit
percent
20.2.3.3 C373940405
Counter Name
Duration When Memory Load Is Higher Than Threshold
Short Name
EQPT.MemoryOverLoadTime.CCBoard
Counter Description
The memory utilization rate refers to the ratio of the number of used memory and the total
number of memory. The eNodeB collects the memory usage at per sampling time and
compare it with the threshold. If it is higher than the threshold, the counter is incremented
by the sampling period.
Triggering Point
When the memory load is higher than the threshold.
Refer to .
Update Description
The counter is incremented by time when the memory load is higher threshold.
Counter Type
Accumulated value
Sampling Period
2s
Unit
s
20-6
II
III