Академический Документы
Профессиональный Документы
Культура Документы
VALVES
AND
CHECK VALVES
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES A KNIFE GATE VALVES
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES AB KNIFE GATE VALVES
9 Any type of actuator available except manual lever. Rising or non rising
stem
9 Any type of soft sealing: Nitrile, Viton, Silicon etc. Metal or PTFE Not
available
9 All kind of accesories available: Deflector cone, Reinforced socket,
Diaphragm, Mechanical Limit Switches, Inductive Switches and
Positioners, Solenoid valves, Connection electrical boxes, electrical
wiring and pneumatic piping, Stroke limiting mechanical stops,
Mechanical locking device, Emergency manual actuator (hand wheel
/gear box)
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES C KNIFE GATE VALVES
9 Any type of soft sealing: Nitrile, Viton, Silicon, PTFE etc. Also
metal seat available
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES D KNIFE GATE VALVES
Quality Dossier:
All valves are hydrostatically tested at CMO with water and CMO material and
test certificates can be provided.
Body test pressure = Maximum rated pressure x 1,5
Seat test pressure = Maximum rated pressure x 1,
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES DT KNIFE GATE VALVES
Wafer style, unidirectional knife gate valve. This knife gate valve is recommended for
Cast body, composed by two bolted parts, Paper Industry and especially for rejects
with inside sliding guides to provide a handling (impurities contained in paper
smooth operation. fibres like metal clips, staples, wires and
Double gate design with two pneumatic others).
actuators that provides full bore when
opening.
High flow rates with low pressure drops.
Several seat and packing materials
available.
Face to face dimension according CMO
standard.
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES F KNIFE GATE VALVES
Wafer style, uni-directional knife gate valve. This knife gate valve is appropriate for
applications with dry products like dust,
One piece integral cast body with guides to powders and grain, and as general rule, it is
support the gate and seating wedges. used for dry solids in gravity feed applications.
High flow rates with low pressure drops. Designed for a wide range of applications such
Several seat and packing materials us:
available.
Face to face dimension according CMO - Mining.
standard. - Chemical plants.
Arrow in the body pointing the flow direction: - Food industry.
In this type of knife gate valve the arrow - Power plants.
points the flow direction in off seating
direction. This means that the flow forces
the gate to separate from the seat
Wafer style, uni-directional knife gate valve. This knife gate valve is appropriate for
One piece integral cast body with guides to applications with dry products like dust,
support the gate, seating wedges and bolted powders and grain containing air or gases.
bonnet As a general rule, it is used for dry solids in
High flow rates with low pressure drops. gravity feed applications containing also air
Several seat and packing materials or gases.
available.
Face to face dimension according CMO Designed for a wide range of applications
standard. such us:
Arrow in the body pointing the flow direction:
In this type of knife gate valve the arrow - Mining.
points the flow direction in off seating - Chemical plants.
direction. This means that the flow forces the - Food industry.
gate to separate from the seat. - Power plants.
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES GL KNIFE GATE VALVES
GM SERIES
Knife gate valve of double Cast Iron GG25 body
bolted construction, for slurry applications and lower
pressures.
From DN 50 to DN 125: 10 (kg/cm2)
DN 150: 8 (kg/cm2)
DN 200: 7 (kg/cm2)
From DN 250 to DN 300: 5 (kg/cm2)
From DN 350 to DN 400: 4 (kg/cm2)
From DN 450 to DN 600: 3 (kg/cm2)
From DN 700 to DN 1200: 2 (kg/cm2)
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES K KNIFE GATE VALVES
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES L KNIFE GATE VALVES
9 Any type of actuator available except manual lever. Rising or non rising
stem
9 Any type of soft sealing: Nitrile, Viton, Silicon etc. Metal or PTFE Not
available
9 Mirror Polished Gate, PTFE Lined Gate, Stellited gate, Scraper in the
packing, Air injection in the packing gland, Heating jacket, Flushing holes
in body , Mechanical Limit Switches, Inductive Switches and Positioners,
Solenoid valves, Connection electrical boxes, electrical wiring and
pneumatic piping, Stroke limiting mechanical stops, Mechanical locking
device, Emergency manual actuator (hand wheel /gear box), Triangular
(V-notch) and pentagonal diaphragm with indication rule
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES R CHECK VALVE
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES T KNIFE GATE VALVES
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES B KNIFE GATE VALVES
Wafer style, bidirectional knife gate valve. This knife gate valve is appropriate for liquids
Cast body, composed by two bolted parts, with a solids concentration
with inside sliding guides to provide a of maximum 8%.
Low concentration fluides like paper pulp
smooth operation. with low concentration, slurries,...
High flow rates with low pressure drops. Designed for a wide range of applications
Several seat and packing materials such us:
available.
Face to face dimension according CMO - Pulp and Paper.
standard. - Mining.
- Effluent handling plants.
- Chemical plants.
- Food and beverage.
- Bulk conveying.
- Sewage applications.
- Chemical plants.
Wafer style, unidirectional knife gate valve. High concentration flows and solids like
Cast body, composed by two bolted parts, granulated coal, also used for food applications
with inside sliding guides to provide a and animal waste applications.
smooth operation. If it is used for dry solids in gravity feed
High flow rates with low pressure drops. applications it is recommended to be installed
Several seat and packing materials with the arrow in the opposite direction to the
available. flow direction.
Face to face dimension according CMO Designed for a wide range of applications such
standard. us:
Arrow pointing in the flow direction in the
valve body - Pulp and Paper.
- Mining.
- Effluent handling plants.
- Food and beverage.
- Bulk conveying.
- Sewage applications.
- Chemical plants.
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es
SERIES 3V-4V DISTRIBUTION VALVES
PRODUCT DESCRIPTION
GENERAL APPLICATIONS
Paper stock distribution.
Actuators: Manual, pneumatic, electric ....
TECHNICAL DATA
C.M.O.
Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN)
Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / cmo@cmo.es http://www.cmo.es