Вы находитесь на странице: 1из 3

FORMAT PENYEDIAAN LAPORAN AKHIR

UNTUK PROJEK PENYELIDIKAN

1. Format tesis (Thesis Format)


- Halaman Judul (Title page)
- Halaman dedikasi/penghargaan ( Dedication)
- Abstrak B. Inggeris (Abstract in English)
- Abstrak B. Melayu (Abstract in Malay)
- Halaman Kandungan (Table of Contents)
- Halaman Senarai Jadual (List of Tables)
- Halaman Senarai Rajah (List of Figures)
- Halaman Senarai Simbol/Singkatan/Tatanama/Istilah (List of Symbols/ Abbreviations/ Notations/
Terminology)
- Halaman Senarai Lampiran (List of Appendices)
- Bab 1 Pengenalan (Chapter 1 - Introduction)
- Bab 2 Kajian Literatur (Chapter 2 - Literature Study)
- Bab 3 Metodologi (Chapter 3 – Methodology)
- Bab 4 Data & Perbincangan (Chapter 4 – Data & Discussion)
- Bab 5 Kesimpulan & Cadangan ( Conclusion & Suggestion)
- Rujukan (References)
- Lampiran (Appendices)
2. Contoh format kulit depan disertakan (Example of Cover enclosed)

3. Contoh format bagi halaman judul (halaman) disertakan. (Example of Title page enclosed)

4. Melengkapkan borang pengesahan laporan akhir penyelidikan. (UTM/RMC/F/0024(1998)) (Complete the

final report status validation form)

5. Hantar 1 salinan tanpa jilid ke RMC. (Submit 1 loose copy of final report)

6. Melengkapkan borang “Preliminary IP Screening & Technology Assessment

Form”(UTM/RMC/F/0014(1998)) (Complete the “Preliminary IP Screening & Technology Assessment

Form”)

7. Melengkapkan borang “End of Project” dan “Benefits Report” (IRPA/ Science fund sahaja). (Complete

the “End of Project” and “Benefits Report” (IRPA/ Science fund only))

© 2008 Universiti Teknologi Malaysia – All Rights Reserved


8. Soft copy .PDF laporan akhir (dalam bentuk CD 1 sahaja) ( 1 CD of final report in .PDF format)

9.1 Panduan Penyediaan Softcopy Laporan Akhir (Guidelines for preparing the final report in softcopy

form)

a) Laporan hendaklah disimpan dalam 1 fail (Report should be saved in one file)

b) Fail mesti dalam format PDF. (File must be in .PDF format)

9.2 Panduan Penamaan Softcopy Laporan Akhir (Naming the file)

Penamaan fail adalah seperti berikut:

No.Vot<space>Nama Ketua Projek<space>Fakulti<space>Status<space> Tahun.pdf

Contoh : 74100 Rosli bin Mohd Yunus FKKKSA TT 2004

Penerangan:

Status adalah status laporan akhir projek samada:

SU – sulit

TH- terhad

TT- tidak terhad

(The file should be named as follows:)

Vote No.<space>Name of Project Leader<space>Faculty<space>Status<space>Year.pdf

Example: 74100 Rosli bin Mohd Yunus FKKKSA TT 2004

Description:

Status is the final report status which is categorized under any of the following:

SU – confidential

TH- restricted

TT- open access

9. Melengkapkan borang maklumat penerbitan (Jurnal atau buku yang telah dihasilkan menggunakan vot

yang berkenaan). (Complete the publication form, journal or books published using this vote)

© 2008 Universiti Teknologi Malaysia – All Rights Reserved


GUIDELINES FOR PREPARING PROJECT ABSTRACTS

Abstract must reflect the research contribution to the new knowledge and technology or be of immediate interest
to the target group. In addition, information or data in the abstract must be correct.
Content:

1. DESCRIPTION OF PROJECT
Outline the scope, objective and nature of the project (e.g field data, lab data, computer modeling,
etc.)

2. APPLICATIONS
Describe the possible applications of the information / data provided by the project.

3. RESULTS, OBSERVATION AND CONCLUSIONS


Summarise the results and major conclusions and state how these differ from previous work or
project on the same subject. State whether new information / data will be revealed and whether
data have obtained from field, lab. Or computer work.

4. KNOWLEDGE OR TECHNOLOGY CONTRIBUTIONS


Describes the significance of the subject matter in the project by listing the contributions to the
technological data base of the industry/nation.

5. KEYWORDS

LENGTH: 200 – 300 words in Times 12 font.

© 2008 Universiti Teknologi Malaysia – All Rights Reserved

Вам также может понравиться