Академический Документы
Профессиональный Документы
Культура Документы
2
Before connecting to a vehicle,
select your diagnostic interface under
Tools / Select Com Link.
1 7 1
Select the Parameter Upgrade After Process Request is complete Select Recover.
tab and follow highlighted screen and status shows downloaded,
prompts for key cycles. return to Campaigns tab to
complete update.
2
2 8 Select the associated VIN.
Enter associated Select Flash Blank Module and
case file number. follow highlighted screen prompts for
key cycles.
SECTION 3 | BLANK MODULE FLASHING (NavKal Pro ONLY) SECTION 4 | PROCESS REQUEST SECTION 6 | PROGRAMMING VERIFICATION CODE (PVC)
Note: Blank module flashing should be performed only when replacing a module. Note: All pending process requests include blank module flashing, parameter changes, Note: After programming is complete, status will show pending PVC.
PVC creation and upload history. Request type and status are displayed for each
VIN... if applicable.
1 1 Select Process Requests tab and follow Select Process Requests to 2 1
Select Blank Module Flashing Select the Process
tab and follow highlighted screen highlighted screen prompts for key cycles. complete all pending requests.
Requests tab to send
prompts for key cycles. history and create a
Programming Verification
2 If applicable, input associated case file
Code (PVC). A PVC will
be generated against the
VIN, chassis, miles, hours and fuel.
associated VIN number.
3 2
Select Save Request and follow highlighted
Select View PVC to
screen prompts for key cycles.
view or print PVC.
4 5
Select Select module
Engine Platform. being replaced.