Академический Документы
Профессиональный Документы
Культура Документы
1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
HEALTH, SAFETY & ENVIRONMENT IN PETROLEUM INDUSTRY
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
2. What is the major source of air pollutants from internal combustion engines? [ ]
A) NOx and CO B) CH4 C) O2 D) Propane & butane
3. To which threshold limit a worker can be exposed without experiencing irritation, chorionic or irreversible
tissue change, or work efficiency? [ ]
A) Reference dose (RfD) B) The threshold limit values-time weighted average (TLV-TWA)
C) The threshold limit values-short term exposure limit (TLV-STEL)
D) The threshold limit value-ceilings (TLV-C)
5. What is the impact of disposal of water based drilling wastes from onshore? [ ]
A) Lethal on inhalation B) Mostly damages the human organs
C) No serious threat to human health or to environment D) None
6. How the company can know the first aid procedures in the event of human exposure from certain
chemicals? [ ]
A)By getting the material safety data sheets from chemical suppliers B)They make their own procedures
C) They do R&D in their labs D) Use their experienced and skilled personnel
7. What is the method of removal of dissolved solids from waste water before any disposal method?
[ ]
A) Evaporation/distillation B) Filtration C)Percolation D)Incineration
8. At what pressure safety relief valve fitted on mud pumps connected to a drilling rig is to be set? [ ]
A) 05% excess of working pressure of the mud pumps
B) 10% excess of working pressure of the mud pumps
C) 25% excess of working pressure of the mud pumps
D) 50% excess of working pressure of the mud pumps
9. Which type of flammable liquid shall not be used for cleaning purposes without prior permission in writing
of the Manager or Installation Manager? [ ]
0 0
A) having a flash point less than 85 C B) having a flash point less than 75 C
C) having a flash point less than 650C D) having a flash point less than 550C
Cont...2
Code No: 117DP :2: Set No. 1
11. With respect to toxicity, high molecular weight paraffins in water are ____________________.
13. The current US environmental protection agency limits for discharge of hydrocarbons in water is 29 mg/l
where as in India it is ___________________.
14. The hydrocarbons that escape from various production equipments is called ___________________
15. Oil based muds are generally more expensive and greater potential for ___________________
16. When salty drilling muds were spread over soil the yield of ___________________ reduced.
18. ___________________ is the greatest volume of waste in drilling and production operations.
19. ___________________shall see when any drilling rig, work over rig and associated equipment
under shifting shall reach safely as per regulations.
20. Every storage tank shall be protected against lightning by suitable ___________________.
-oOo-
Code No: 117DP Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
HEALTH, SAFETY & ENVIRONMENT IN PETROLEUM INDUSTRY
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
2. What is the impact of disposal of water based drilling wastes from onshore? [ ]
A) Lethal on inhalation B) Mostly damages the human organs
C) No serious threat to human health or to environment D) None
3. How the company can know the first aid procedures in the event of human exposure from certain
chemicals? [ ]
A)By getting the material safety data sheets from chemical suppliers B)They make their own procedures
C) They do R&D in their labs D) Use their experienced and skilled personnel
4. What is the method of removal of dissolved solids from waste water before any disposal method?
[ ]
A) Evaporation/distillation B) Filtration C)Percolation D)Incineration
5. At what pressure safety relief valve fitted on mud pumps connected to a drilling rig is to be set? [ ]
A) 05% excess of working pressure of the mud pumps
B) 10% excess of working pressure of the mud pumps
C) 25% excess of working pressure of the mud pumps
D) 50% excess of working pressure of the mud pumps
6. Which type of flammable liquid shall not be used for cleaning purposes without prior permission in writing
of the Manager or Installation Manager? [ ]
A) having a flash point less than 850C B) having a flash point less than 750C
C) having a flash point less than 650C D) having a flash point less than 550C
8. What is the viscosity control agent or chemical in water based drilling fluids? [ ]
A) Barium sulfate (Barites) B) Bentonite clays C)Chromium D) Lignite
9. What is the major source of air pollutants from internal combustion engines? [ ]
A) NOx and CO B) CH4 C) O2 D) Propane & butane
10. To which threshold limit a worker can be exposed without experiencing irritation, chorionic or irreversible
tissue change, or work efficiency? [ ]
A) Reference dose (RfD) B) The threshold limit values-time weighted average (TLV-TWA)
C) The threshold limit values-short term exposure limit (TLV-STEL)
D) The threshold limit value-ceilings (TLV-C)
Cont...2
Code No: 117DP :2: Set No. 2
11. The hydrocarbons that escape from various production equipments is called ___________________
12. Oil based muds are generally more expensive and greater potential for ___________________
13. When salty drilling muds were spread over soil the yield of ___________________ reduced.
15. ___________________ is the greatest volume of waste in drilling and production operations.
16. ___________________shall see when any drilling rig, work over rig and associated equipment
under shifting shall reach safely as per regulations.
17. Every storage tank shall be protected against lightning by suitable ___________________.
18. With respect to toxicity, high molecular weight paraffins in water are ____________________.
20. The current US environmental protection agency limits for discharge of hydrocarbons in water is 29 mg/l
where as in India it is ___________________.
-oOo-
Code No: 117DP Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
HEALTH, SAFETY & ENVIRONMENT IN PETROLEUM INDUSTRY
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
2. What is the method of removal of dissolved solids from waste water before any disposal method?
[ ]
A) Evaporation/distillation B) Filtration C)Percolation D)Incineration
3. At what pressure safety relief valve fitted on mud pumps connected to a drilling rig is to be set? [ ]
A) 05% excess of working pressure of the mud pumps
B) 10% excess of working pressure of the mud pumps
C) 25% excess of working pressure of the mud pumps
D) 50% excess of working pressure of the mud pumps
4. Which type of flammable liquid shall not be used for cleaning purposes without prior permission in writing
of the Manager or Installation Manager? [ ]
0 0
A) having a flash point less than 85 C B) having a flash point less than 75 C
C) having a flash point less than 650C D) having a flash point less than 550C
6. What is the viscosity control agent or chemical in water based drilling fluids? [ ]
A) Barium sulfate (Barites) B) Bentonite clays C)Chromium D) Lignite
7. What is the major source of air pollutants from internal combustion engines? [ ]
A) NOx and CO B) CH4 C) O2 D) Propane & butane
8. To which threshold limit a worker can be exposed without experiencing irritation, chorionic or irreversible
tissue change, or work efficiency? [ ]
A) Reference dose (RfD) B) The threshold limit values-time weighted average (TLV-TWA)
C) The threshold limit values-short term exposure limit (TLV-STEL)
D) The threshold limit value-ceilings (TLV-C)
10. What is the impact of disposal of water based drilling wastes from onshore? [ ]
A) Lethal on inhalation B) Mostly damages the human organs
C) No serious threat to human health or to environment D) None
Cont...2
Code No: 117DP :2: Set No. 3
11. When salty drilling muds were spread over soil the yield of ___________________ reduced.
13. ___________________ is the greatest volume of waste in drilling and production operations.
14. ___________________shall see when any drilling rig, work over rig and associated equipment
under shifting shall reach safely as per regulations.
15. Every storage tank shall be protected against lightning by suitable ___________________.
16. With respect to toxicity, high molecular weight paraffins in water are ____________________.
18. The current US environmental protection agency limits for discharge of hydrocarbons in water is 29 mg/l
where as in India it is ___________________.
19. The hydrocarbons that escape from various production equipments is called ___________________
20. Oil based muds are generally more expensive and greater potential for ___________________
-oOo-
Code No: 117DP Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
HEALTH, SAFETY & ENVIRONMENT IN PETROLEUM INDUSTRY
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
2. Which type of flammable liquid shall not be used for cleaning purposes without prior permission in writing
of the Manager or Installation Manager? [ ]
0 0
A) having a flash point less than 85 C B) having a flash point less than 75 C
C) having a flash point less than 650C D) having a flash point less than 550C
4. What is the viscosity control agent or chemical in water based drilling fluids? [ ]
A) Barium sulfate (Barites) B) Bentonite clays C)Chromium D) Lignite
5. What is the major source of air pollutants from internal combustion engines? [ ]
A) NOx and CO B) CH4 C) O2 D) Propane & butane
6. To which threshold limit a worker can be exposed without experiencing irritation, chorionic or irreversible
tissue change, or work efficiency? [ ]
A) Reference dose (RfD) B) The threshold limit values-time weighted average (TLV-TWA)
C) The threshold limit values-short term exposure limit (TLV-STEL)
D) The threshold limit value-ceilings (TLV-C)
8. What is the impact of disposal of water based drilling wastes from onshore? [ ]
A) Lethal on inhalation B) Mostly damages the human organs
C) No serious threat to human health or to environment D) None
9. How the company can know the first aid procedures in the event of human exposure from certain
chemicals? [ ]
A)By getting the material safety data sheets from chemical suppliers B)They make their own procedures
C) They do R&D in their labs D) Use their experienced and skilled personnel
10. What is the method of removal of dissolved solids from waste water before any disposal method?
[ ]
A) Evaporation/distillation B) Filtration C)Percolation D)Incineration
Cont...2
Code No: 117DP :2: Set No. 4
11. ___________________ is the greatest volume of waste in drilling and production operations.
12. ___________________shall see when any drilling rig, work over rig and associated equipment
under shifting shall reach safely as per regulations.
13. Every storage tank shall be protected against lightning by suitable ___________________.
14. With respect to toxicity, high molecular weight paraffins in water are ____________________.
16. The current US environmental protection agency limits for discharge of hydrocarbons in water is 29 mg/l
where as in India it is ___________________.
17. The hydrocarbons that escape from various production equipments is called ___________________
18. Oil based muds are generally more expensive and greater potential for ___________________
19. When salty drilling muds were spread over soil the yield of ___________________ reduced.
-oOo-