COLLEGE OF ENGINEERING ELECTRONICS ENGINEERING DEPARTMENT
RIP Routing Version 2
SALIPOT, RENEE ADRIANNE P.
201310712
DATA COMMUNICATIONS LAB
MONDAY (7:00-10:00AM)
ENGR. JOAN DEL ESPIRITU-STA.ANA
INSTRUCTOR I. INTRODUCTION
RIP or Routing Information Protocol presents a way for routers to share
information about how to route traffic among networks. Each router in RIP has routing table wherein all the networks it can reach is listed. There are two versions of this routing protocol. First is RIP Version 1 which is a classful routing protocol and it does not support VLSM (Variable Length Subnet Masking) therefore it only supports the networks which are not subnetted. RIPv1 does not send subnet mask information with their routing updates. Another version is RIPv2. This version is a Hybrid Routing Protocol and is a classless type of routing therefore supporting VLSM and allows it users to use subnetted networks. In addition to their differences, in RIPv1 updates are broadcasted and has no authentication support on the other hand RIPv2 routing updates are multicated and supports authentication
II. TOPOLOGY III. IP ADDRESSES
NAME NO. OF NETWORK BROADCAST UIP SNM
HOSTS ADDRESS ADDRESS (100.100.-) LAN A 100 100.100.0.0 100.100.0.127 0.1-0.126 255.255.255.0 LAN B 90 100.100.0.128 100.100.0.255 0.129-0.254 255.255.255.0 LAN D 62 100.100.1.0 100.100.1.63 1.1-1.62 255.255.255.128 LAN C 20 100.100.1.64 100.100.1.95 1.65-1.94 255.255.255.128 WAN A 2 100.100.1.96 100.100.1.99 1.97-1.98 255.255.255.252 WAN B 2 100.100.1.100 100.100.1.103 1.101-1.102 255.255.255.252 WAN C 2 100.100.1.104 100.100.107 1.105-1.106 255.255.255.252 WAN D 2 100.100.1.108 100.100.1.111 1.109-1.110 255.255.255.252 WAN E 2 100.100.1.112 100.100.1.115 1.113-1.114 255.255.255.252
ROUTER INTERFACE IP ADDRESS SUBNET MASK
LAN A fa0/0 100.100.0.1 255.255.255.128 RA WAN A se0/0/0 100.100.1.97 255.255.255.252 WAN D se0/0/1 100.100.1.110 255.255.255.252 RB LAN B fa0/0 100.100.0.129 255.255.255.128 WAN A se0/0/1 100.100.1.98 255.255.255.252 WAN B se0/0/0 100.100.1.101 255.255.255.252 WAN E se0/1/0 100.100.1.114 255.255.255.252 RC LAN C fa0/0 100.100.1.65 255.255.255.224 WAN B se0/0/1 100.100.1.102 255.255.255.252 WAN C se0/0/0 100.100.1.105 255.255.255.252 RD LAN D fa0/0 100.100.1.1 255.255.255.192 WAN C se0/0/1 100.100.1.106 255.255.255.252 WAN D se0/0/0 100.100.1.109 255.255.255.252 RE SERVER fa0/1 200.200.1.1 255.255.255.0 WAN E se0/0/0 100.100.1.113 255.255.255.252
END DEVICE IP ADDRESS DEFAULT GATEWAY SUBNET MASK
PC A 100.100.0.2 100.100.0.1 255.255.255.128 PC B 100.100.0.130 100.100.0.129 255.255.255.128 PC C 100.100.1.66 100.100.1.66 255.255.255.224 PC D 100.100.1.2 100.100.1.1 255.255.255.192 SERVER 200.200.1.2 200.200.1.1 255.255.255.0 IV. SYNTAX FOR ROUTER A FOR ROUTER B FOR ROUTER C FOR ROUTER D FOR ROUTER E V. CONCLUSION
The outcome of this activity is to be able to send and receive packets
coming from different routers to another through the use of RIPv2 with static routing. This method of information protocol is an efficient way for it has many advantages and is user-friendly. To ensure the success of sending packets from router to router as it supports VLSM and allows its users to use subnetted network. In addition to this, routing updates is being multicasted through the network. VI. REFERENCES
RIP V2. (n.d.). Retrieved September 17, 2017, from https://www.sqa.org.uk/e-
learning/NetInf104CD/page_40.htm Routing Information Protocol Version 2. (n.d.). Retrieved September 17, 2017, from https://www.ciscoforall.com/routing-information-protocol-version-2/ What is difference between RIPv1 and RIPv2? (n.d.). Retrieved September 17, 2017, from https://www.ciscoforall.com/what-is-difference-between-ripv1-and-ripv2/