Академический Документы
Профессиональный Документы
Культура Документы
Multi-stage
Pumps - 60 Hz.
PVM - Cast Iron
PVMI - 304 Stainless Steel
PVMX - 316 Stainless Steel
Flow
Models GPM
Series HP Range
PVM/PVMI/PVMX 2 1/2 5 1 20
PVM/PVMI/PVMX 4 1/2 7.5 3 40
PVM/PVMI/PVMX 8 3/4 15 5 65
PVM/PVMI/PVMX 16 5 25 8 115
PVM 32 3 40 15 215
PSI
8 stage, 2 HP
156 360
100
139 320 7 Stage, 2 HP
121 280
6 Stage, 1-1/2 HP
80
104 240
5 Stage, 1-1/2 HP
87 60 200
Head - ft
Head - m
4 Stage, 1 HP
PSI
69 160
3 Stage, 3/4 HP
40
52 120
35 80
20
17 40
0 0 0
0 2 4 6 8 10 12 14 16 18
Capacity - US gpm
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
Capacity - m3/h
2
PVM (I/X) 2 SERIES
Performance Curves PVM (I/X) 2 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 360 PSI
389 900
250 18 Stage, 5 HP
350 800
17 Stage, 5 HP
16 Stage, 5 HP
700
300 15 Stage, 5 HP
200
14 Stage, 5 HP
600
13 Stage, 3 HP
250
12 Stage, 3 HP
500 11 Stage, 3 HP
150
200 10 Stage, 3 HP
PSI
9 Stage, 3 HP
400
150
100
300
100
200
50
50
100
0 0 0
0 2 4 6 8 10 12 14 16 18
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
3
PVM (I/X) 2 SERIES
Single Stage Performance Data PVM (I/X) 2 Series
22 50 100
14
90
17 12 40 80
70
10
13 30 60
Efficiency - %
Head - ft
Head - m
8
50
PSI
9 6 20 40
30
4
4 10 20
2
10
0 0 0 0
0.4
0.3
Power - hp
0.2
Power - kW
0.2
0.1
0.1
0.0 0.0
9 6 20
NPSHr - ft
NPSHr - m
4
4 10
PSI
0 0 0
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0
Capacity - US gpm
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0
Capacity - m3/h
4
PVM2 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 1.2 GPM
C C
FLOW RANGE: 1.2 20 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 30/2 - 60 145 PSI
70 - 180 220 PSI
1/4" NPT
Gauge Tap MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb A E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 1-1/4" Flange 1/4" NPT
Gauge Tap MOTOR OPTIONS: TEFC or ODP
1-1/4"
NPT CONSTRUCTION MATERIALS: See Page 16.
9-7/8" 10"
3-15/16" 3-15/16"
3-1/16"
3-7/8"
1/2" Dia. 4 Places 5-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Weight may vary from published information.
5
PVM2 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 1.2 GPM
C C
FLOW RANGE: 1.2 20 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 30/2 - 60 145 PSI
70 - 180 220 PSI
1/4" NPT
Gauge Tap MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb A E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 1-1/4" Flange 1/4" NPT
Gauge Tap MOTOR OPTIONS: TEFC or ODP
1-1/4"
NPT CONSTRUCTION MATERIALS: See Page 16.
9-7/8" 10"
3-15/16" 3-15/16"
3-1/16"
3-7/8"
1/2" Dia. 4 Places 5-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Weight may vary from published information.
6
PVM (I/X) 2 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 1.2 GPM
C C
FLOW RANGE: 1.2 20 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
MAXIMUM INLET PRESSURE:
Vent Plug
behind 30/2 - 60 145 PSI
Coupling Guard 70 - 180 220 PSI
MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb A E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 1-1/4" Flange
1-1/4" MOTOR OPTIONS: TEFC or ODP
Victaulic
CONSTRUCTION MATERIALS: See Page 16.
3" 3-7/8"
9-7/8" 8-1/4"
3-15/16" 3-15/16"
2-1/8"
5-1/2"
8-3/16" 7-3/32" 8-3/16"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
7
PVM (I/X) 2 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 1.2 GPM
C C
FLOW RANGE: 1.2 20 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
MAXIMUM INLET PRESSURE:
Vent Plug
behind 30/2 - 60 145 PSI
Coupling Guard 70 - 180 220 PSI
MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb A E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 1-1/4" Flange
1-1/4" MOTOR OPTIONS: TEFC or ODP
Victaulic
CONSTRUCTION MATERIALS: See Page 16.
3" 3-7/8"
9-7/8" 8-1/4"
3-15/16" 3-15/16"
2-1/8"
5-1/2"
8-3/16" 7-3/32" 8-3/16"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
8
PVM (I/X) 4 SERIES
Performance Curves PVM (I/X) 4 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 360 PSI
173 400
120
8 Stage, 3 HP
156 360
6 Stage, 3 HP
121 280
80
87 60 200
4 Stage, 1-1/2 HP
Head - ft
Head - m
PSI
69 160
3 Stage, 1-1/2 HP
40
52 120
2 Stage, 3/4 HP
35 80
20
2/1 Stage, 1/2 HP
17 40
0 0 0
0 5 10 15 20 25 30 35 40 45 50
Capacity - US gpm
0 1 2 3 4 5 6 7 8 9 10 11
Capacity - m3/h
9
PVM (I/X) 4 SERIES
Performance Curves PVM (I/X) 4 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 360 PSI
350 800
16 Stage, 7 1/2 HP
720
15 Stage 7 1/2 HP
300
200 14 Stage, 5 HP
640
13 Stage, 5 HP
250
560 12 Stage 5 HP
11 Stage, 5 HP
150
480
10 Stage, 5 HP
200
9 Stage, 5 HP
400
PSI
150
100
320
240
100
50 160
50
80
0 0 0
0 5 10 15 20 25 30 35 40 45 50
0 1 2 3 4 5 6 7 8 9 10 11
10
PVM (I/X) 4 SERIES
Single Stage Performance Data PVM (I/X) 4 Series
22 50 100
14
90
17 12 40 80
70
10
13 30 60
Efficiency - %
Head - ft
Head - m
8
50
PSI
9 6 20 40
30
4
4 10 20
2
10
0 0 0 0
0.8
0.6
Power - hp
0.4
Power - kW
0.4
0.2
0.2
0.0 0.0
6 15
4
NPSHr - ft
NPSHr - m
3
3 8
2
PSI
1
0 0 0
0 10 20 30 40 50
Capacity - USgpm
0 1 2 3 4 5 6 7 8 9 10 11
Capacity - m3/h
11
PVM4 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 3 GPM
C C
FLOW RANGE: 3 40 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 20 90 PSI
30 - 80/7 145 PSI
1/4" NPT
Gauge Tap 80 - 160 220 PSI
E ANSI 250 lb A E MAXIMUM AMBIENT TEMPERATURE: 104 F
A 1-1/4" Flange 1/4" NPT
Gauge Tap LIQUID TEMPERATURE RANGE: +5 F to +250 F
1-1/4"
NPT MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 16.
3" 1-1/4" ANSI. 250 lb. 4-Bolt Flange
9-7/8" 10"
3-15/16" 3-15/16"
3-1/16"
3-7/8"
1/2" Dia. 4 Places 5-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
12
PVM4 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 3 GPM
C C
FLOW RANGE: 3 40 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 20 90 PSI
30 - 80/7 145 PSI
1/4" NPT
Gauge Tap 80 - 160 220 PSI
E ANSI 250 lb A E MAXIMUM AMBIENT TEMPERATURE: 104 F
A 1-1/4" Flange 1/4" NPT
Gauge Tap LIQUID TEMPERATURE RANGE: +5 F to +250 F
1-1/4"
NPT MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 16.
3" 1-1/4" ANSI. 250 lb. 4-Bolt Flange
9-7/8" 10"
3-15/16" 3-15/16"
3-1/16"
3-7/8"
1/2" Dia. 4 Places 5-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
13
PVM (I/X) 4 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 3 GPM
C C
FLOW RANGE: 3 40 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 20 90 PSI
behind
Coupling Guard 30 - 80/7 145 PSI
80 - 160 220 PSI
E ANSI 250 lb A E MAXIMUM AMBIENT TEMPERATURE: 104 F
A 1-1/4" Flange
1-1/4" LIQUID TEMPERATURE RANGE: +5 F to +250 F
Victaulic
MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 16.
3" 3-7/8"
9-7/8" 8-1/4"
3-15/16" 3-15/16"
2-1/8"
5-1/2"
8-3/16" 7-3/32" 8-3/16"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
14
PVM (I/X) 4 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 3 GPM
C C
FLOW RANGE: 3 40 GPM
MINIMUM SUCTION PIPE SIZES:
1-1/4 Nominal Diameter, Schedule 40 Pipe
B F F B
MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 20 90 PSI
behind
Coupling Guard 30 - 80/7 145 PSI
80 - 160 220 PSI
E ANSI 250 lb A E MAXIMUM AMBIENT TEMPERATURE: 104 F
A 1-1/4" Flange
1-1/4" LIQUID TEMPERATURE RANGE: +5 F to +250 F
Victaulic
MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 16.
3" 3-7/8"
9-7/8" 8-1/4"
3-15/16" 3-15/16"
2-1/8"
5-1/2"
8-3/16" 7-3/32" 8-3/16"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
15
PVM (I/X) 2 & 4 SERIES
Construction Materials
Description Cast Iron 304 Stainless Steel 316 Stainless Steel Optional Accessories
Shaft AISI 316 SS AISI 316 SS AISI 316 SS
Impellers, Diffuser Chambers,
Pump Sleeve,
Suction Interconnector,
and Shaft Seal Parts AISI 304 SS AISI 304 SS AISI 316 SS
Suction/discharge Class 30 Cast Iron 304 SS 316 SS
Motor bracket Class 30 Cast Iron Class 30 CI or 316 SS Class 30 CI or 316 SS
Motor Couplings Class 30 Cast Iron Class 30 Cast Iron Class 30 Cast Iron
Intermediate Chamber Aluminum Oxide Aluminum Oxide Aluminum Oxide
Bearings Ceramic Ceramic Ceramic
Bearing Ring Tungsten Carbide Tungsten Carbide Tungsten Carbide
O-Rings EPDM EPDM EPDM Viton or Buna
Wear Rings Teflon Teflon Teflon
Sleeve O-Rings EPDM EPDM EPDM Viton or Buna
Shaft Spacers AISI 316 SS AISI 316 SS AISI 316 SS
Top Spring AISI 316 SS AISI 316 SS AISI 316 SS
Coupling Guard AISI 302 SS AISI 302 SS AISI 302 SS
Staybolts, Nuts & Washers Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel
Mechanical Seal
(High Pressure)
Stationary Face Tungsten Carbide Tungsten Carbide Tungsten Carbide
Rotating Face Tungsten Carbide Tungsten Carbide Tungsten Carbide
O-Rings EPDM EPDM EPDM Viton or Buna
Upper and Lower Drivers AISI 316 SS AISI 316 SS AISI 316 SS
Spring AISI 316 SS AISI 316 SS AISI 316 SS
16
PVM (I/X) 8 SERIES
Performance Curves PVM (IX) 8 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F
Maximum Working Pressure: 360 PSI
173 400
120
156 360
100 6 Stage, 5 HP
139 320
121 280
5 Stage, 5 HP
80
104 240
4 Stage, 3 HP
87 60 200
Head - ft
Head - m
PSI
3 Stage, 3 HP
69 160
40
52 120
2 Stage, 1-1/2 HP
35 80
20
2/1 Stage, 3/4 HP
17 40
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Capacity - US gpm
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Capacity - m3/h
17
PVM (I/X) 8 SERIES
Performance Curves PVM (I/X) 8 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 360 PSI
1,000
300
400
900
16 Stage, 15 HP
250
350 800 15 Stage, 15 HP
14 Stage, 10 HP
700 13 Stage, 10 HP
300
200
12 Stage, 10 HP
600
11 Stage, 10 HP
250
10 Stage, 7.5 HP
150 500
9 Stage, 7.5 HP
200
8 Stage, 7.5 HP
PSI
400
7 Stage, 5 HP
150
100
300
100
200
50
50
100
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
18
PVM (I/X) 8 SERIES
Single Stage Performance Data PVM (I/X) 8 Series
31 72 100
20 90
27 63
80
23 54
70
15
19 45
60
Efficiency - %
Head - ft
Head - m
16 36 50
PSI
10
40
12 27
30
8 18
5
20
4 9
10
0 0 0 0
1.00
0.60 0.75
Power - hp
Power - kW
0.40 0.50
0.20 0.25
0.00 0.00
6 15
4
NPSHr - ft
NPSHr - m
3
3 8
2
PSI
1
0 0 0
0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0
Capacity - US gpm
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0
Capacity - m3/h
19
PVM8 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 5.3 GPM
C C
FLOW RANGE: 5.3 65 GPM
MINIMUM SUCTION PIPE SIZES:
B B 2 Nominal Diameter, Schedule 40 Pipe
F F
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 40 90 PSI
1/4" NPT 50 - 160 145 PSI
1/4" NPT Gauge Tap
Gauge Tap MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 2" Flange A
2" NPT MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 29.
3-1/2"
2" ANSI. 250 lb. 8-Bolt Flange
11-13/16" 12-5/64"
5-1/8" 5-1/8"
4-1/16"
5"
17/32" Dia. 4 Places 6-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
20
PVM8 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 5.3 GPM
C C
FLOW RANGE: 5.3 65 GPM
MINIMUM SUCTION PIPE SIZES:
B B 2 Nominal Diameter, Schedule 40 Pipe
F F
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 40 90 PSI
1/4" NPT 50 - 160 145 PSI
1/4" NPT Gauge Tap
Gauge Tap MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 2" Flange A
2" NPT MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 29.
3-1/2"
2" ANSI. 250 lb. 8-Bolt Flange
11-13/16" 12-5/64"
5-1/8" 5-1/8"
4-1/16"
5"
17/32" Dia. 4 Places 6-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
21
PVM (I/X) 8 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 5.3 GPM
C C
FLOW RANGE: 5.3 65 GPM
MINIMUM SUCTION PIPE SIZES:
B B 2 Nominal Diameter, Schedule 40 Pipe
F F
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 40 90 PSI
50 - 160 145 PSI
MAXIMUM AMBIENT TEMPERATURE: 104 F
ANSI 250 lb
E 2" Flange E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A A
2" Victaulic
MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 29.
3-1/2"
5"
11-13/16" 10-1/4"
5-1/8" 5-1/8"
4-13/32"
9-5/8" 8-1/2" 9-5/8" 6-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
22
PVM (I/X) 8 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 5.3 GPM
C C
FLOW RANGE: 5.3 65 GPM
MINIMUM SUCTION PIPE SIZES:
B B 2 Nominal Diameter, Schedule 40 Pipe
F F
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 20/1 - 40 90 PSI
50 - 160 145 PSI
MAXIMUM AMBIENT TEMPERATURE: 104 F
ANSI 250 lb
E 2" Flange E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A A
2" Victaulic
MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 29.
3-1/2"
5"
11-13/16" 10-1/4"
5-1/8" 5-1/8"
4-13/32"
9-5/8" 8-1/2" 9-5/8" 6-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
23
PVM (I/X) 16 SERIES
Performance Curves PVM (I/X) 16 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F
Maximum Working Pressure: 360 PSI
173 400
120
156 360
5 Stage, 10 HP
100
139 320
80
104 240
3 Stage, 7.5 HP
87 60 200
Head - ft
Head - m
PSI
69 160
3/2 Stage, 5 HP
40
52 120
35 80
20
17 40
0 0 0
0 25 50 75 100 125
Capacity - US gpm
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Capacity - m3/h
24
PVM (I/X) 16 SERIES
Performance Curves PVM (I/X) 16 Series
Nominal RPM: 3450
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 360 PSI
1,000
300
400
900
12 Stage, 25 HP
250
350 800
11 Stage, 25 HP
700 10 Stage, 20 HP
300
9 Stage, 20 HP
600
250
8 stage, 15 HP
7 Stage, 15 HP
150 500
200
PSI
6 Stage, 15 HP
400
150
100
300
100
200
50
50
100
0 0 0
0 25 50 75 100 125
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
25
PVM (I/X) 16 SERIES
Single Stage Performance Data PVM (I/X) 16 Series
35 80 100
31 72 90
20
27 64 80
24 56 70
15
21 48 60
Efficiency - %
Head - ft
Head - m
17 40 50
PSI
14 10 32 40
10 24 30
7 5 16 20
3 8 10
0 0 0 0
2.4
1.6
1.8
Power - hp
1.2
Power - kW
0.8 1.2
0.4 0.6
0.0 0.0
17 12 40
NPSHr - ft
NPSHr - m
8
9 20
PSI
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
Capacity - US gpm
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
Capacity - m3/h
26
PVM16 SERIES
Cast Iron Construction
FLANGED
Allow Space
THREADED
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 8.5 GPM
C C
FLOW RANGE: 8.5 115 GPM
MINIMUM SUCTION PIPE SIZES:
B B 2 Nominal Diameter, Schedule 40 Pipe
F F
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 30/2 - 30 90 PSI
1/4" NPT 40 - 120 145 PSI
1/4" NPT Gauge Tap
Gauge Tap MAXIMUM AMBIENT TEMPERATURE: 104 F
E ANSI 250 lb E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A 2" Flange A
2" NPT MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 29.
3-1/2"
2" ANSI. 250 lb. 8-Bolt Flange
11-13/16" 12-5/64"
5-1/8" 5-1/8"
4-1/16"
5"
17/32" Dia. 4 Places 6-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
27
PVM (I/X) 16 SERIES
304 SS and 316 SS Construction
FLANGED
Allow Space
VICTAULIC
Technical Information
to Remove
D Motor D MINIMUM PUMPING RATES: 8.5 GPM
C C
FLOW RANGE: 8.5 115 GPM
MINIMUM SUCTION PIPE SIZES:
B B 2 Nominal Diameter, Schedule 40 Pipe
F F
3/4" NPT MAXIMUM INLET PRESSURE:
Vent Plug 30/2 - 30 90 PSI
40 - 120 145 PSI
MAXIMUM AMBIENT TEMPERATURE: 104 F
ANSI 250 lb
E 2" Flange E LIQUID TEMPERATURE RANGE: +5 F to +250 F
A A
2" Victaulic
MOTOR OPTIONS: TEFC or ODP
CONSTRUCTION MATERIALS: See Page 29.
3-1/2"
5"
11-13/16" 10-1/4"
5-1/8" 5-1/8"
4-13/32"
9-5/8" 8-1/2" 9-5/8" 6-1/2"
* Measurements represent the largest number possible for each model using standard efficiency motors.
Includes PMVI models constructed of 304 Stainless Steel and PVMX models constructed of 316 Stainless Steel.
28
PVM (I/X) 8 & 16 SERIES
Construction Materials
Description Cast Iron 304 Stainless Steel 316 Stainless Steel Optional Accessories
Shaft AISI 431 SS AISI 431 SS AISI 316 SS
Impellers, Diffuser Chambers,
Pump Sleeve,
Suction Interconnector,
and Shaft Seal Parts AISI 304 SS AISI 304 SS AISI 316 SS
Suction/discharge Class 30 Cast Iron 304 SS 316 SS
Motor bracket Class 30 Cast Iron Class 30 CI or 316 SS Class 30 CI or 316 SS
Motor Couplings Class 30 Cast Iron Class 30 Cast Iron Class 30 Cast Iron
Intermediate Chamber Aluminum Oxide Aluminum Oxide Aluminum Oxide
Bearings Ceramic Ceramic Ceramic
Bearing Ring Tungsten Carbide Tungsten Carbide Tungsten Carbide
O-Rings EPDM EPDM EPDM Viton or Buna-N
Wear Rings Teflon Teflon Teflon
Sleeve O-Rings EPDM EPDM EPDM Viton or Buna-N
Shaft Spacers AISI 316 SS AISI 316 SS AISI 316 SS
Top Spring AISI 316 SS AISI 316 SS AISI 316 SS
Coupling Guard AISI 302 SS AISI 302 SS AISI 302 SS
Staybolts, Nuts & Washers Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel
Mechanical Seal
(High Pressure)
Stationary Face Tungsten Carbide Tungsten Carbide Tungsten Carbide
Rotating Face Tungsten Carbide Tungsten Carbide Tungsten Carbide
O-Rings EPDM EPDM EPDM Viton or Buna-N
Upper and Lower Drivers AISI 316 SS AISI 316 SS AISI 316 SS
Spring AISI 316 SS AISI 316 SS AISI 316 SS
29
PVM32 SERIES
Performance Curves PVM32 Series
3520 RPM*
3450 RPM
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 230 PSI
195 450
PVM32-5 20HP*
PVM32-5-2 20HP*
120
156 360
PVM32-4 15HP*
100
PVM32-4-2 15HP*
117 270
80 PVM32-3 15HP*
Head - ft
Head - m
PSI
PVM32-3-2 10H P
60
78 180
PVM32-2 7.5H P
PVM32-2-1 7.5H P
PVM32-2-2 7.5H P
40
39 90 PVM32-1 5H P
PVM32-1-1 3H P
20
0 0 0
0 20 40 60 80 100 120 140 160 180 200 220
Capacity - US gpm
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
Capacity - m3/h
30
PVM32 SERIES
Performance Curves PVM32 Series 3520 RPM*
3450 RPM
Based on Fresh Water @ 68 F.
Maximum Working Pressure: 435 PSI
434 1,000
PVM32-9 40HP*
PVM32-9-2 40HP*
303 700
211 PVM32-8 30HP*
PVM32-8-2 30HP*
Head - ft
Head - m
PVM32-7-2 25HP*
161
PVM32-6 25HP*
216 500
PVM32-6-2 25HP*
173 400
111
130 300
87 61 200
0 20 40 60 80 100 120 140 160 180 200 220
Capacity - US gpm
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
Capacity - m3/h
31
PVM32 SERIES
Single Stage Performance Data PVM32 Series
43 100
30
39 90
4.646 in 36 50 60
25 67
35 80 70
71
30 70 71
70
20
26 60 67
3.948 in
Head - ft
Head - m
60
PSI
22 15 50
17 40 50
10
13 30
36
9 20
5
4 10
0 0 0
6
4
Power - hp
Power - kW
3 4.646 in
2 3
3.948 in
1
0 0
17 12 40
NPSHr - ft
NPSHr - m
8
PSI
9 20
4
0 0 0
0 20 40 60 80 100 120 140 160 180 200 220 240
Capacity - US gpm
0 5 10 15 20 25 30 35 40 45 50
3
Capacity - m /h
32
PVM32 SERIES
Cast Iron Construction
D
6-11/16" Technical Information
C MINIMUM PUMPING RATES:
11-1/16"
Up to 175 F - 15 GPM
9-7/16" 175 F to 250 F - 35 GPM
FLOW RANGE: 15 215 GPM
B
MINIMUM SUCTION PIPE SIZES:
F ANSI 300# 2-1/2" 8-Bolt Flange 2-1/2" Nominal Diameter, Schedule 40 Pipe
(6-11 Stage Pumps) MAXIMUM AMBIENT TEMPERATURE: 104 F
7/8"
Priming, Drain and Vent LIQUID TEMPERATURE RANGE: +5 F to +250 F
Plugs Threaded E MOTOR OPTIONS: TEFC or ODP
ISO 228-G 1/2 A
Vent 5-7/8" Single or Three Phase
Plug Priming Port For other options, consult factory.
A 7-1/2"
CONSTRUCTION MATERIALS: See Page 34.
(2)Drain Plugs Rear
(2)Drain Plugs Front
Front Plugs Tapped ANSI 150# 2-1/2" 4-Bolt Flange
1/4" NPT for Gauges (1-5 Stage Pumps)
3/4"
4-1/8
5.50"
12-5/8 7.00"
* Measurements represent the largest number possible for each model using standard efficiency motors.
33
PVM32 SERIES
Materials of Construction
Description Material Description Material
Shaft AISI 431 SS Lower Shaft
Stabilizer Bearing Tungsten Carbide
Impellers
Diffuser Chambers, O-Rings EPDM opt:Viton, Buna-N
Pump Sleeve
Split Cones and Neck Rings Teflon
Split Cone Nuts,
and Suction Coupling Guard AISI 304 SS
Interconnector AISI 304 SS
Staybolts, Nuts & Washers Zinc Plated Steel
Motor Stool Class 30 Cast Iron
Mechanical Seal
Suction/discharge, Stationary Face Tungsten Carbide
Pump Head, Rotating Face Tungsten Carbide
and Motor Couplings 80-55-06 Ductile Iron O-Rings EPDM opt:Viton, Buna-N
Upper and Lower Drivers AISI 304 SS or Better
Intermediate Bearings Leadless Tin Bronze Spring AISI 316 SS
270
230 240
1 to 5 210
Stages
180
150
120
90
60
30
0 0 to100 120 140 160 180 200 220 240 260 280
212 250
Temperature in Degrees F
34
PVM SERIES
Bypass Orifice Sizing
476 1100
433 1000
D
390 900
A B C
346 800
303 700
Head at Orifice (FT)
260 600
PSI
216 500
173 400
130 300
A - 1/8" Orifice
B - 3/16" Orifice
87 200
C - 1/4" Orifice
43 100
D - 5/16" Orifice
0 0
0 5 10 15 20 25 30 35 40 45 50
Capacity (USGPM)
35
AURORA LIMITED WARRANTY
Aurora warrants to the original consumer purchaser (Purchaser) of its products that they are free from
defects in material or workmanship.
If within twelve (12) months from the date of installation or twenty-four (24) months from the date of man-
ufacture any such product shall prove to be defective, it shall be repaired or replaced at Auroras option,
subject to the terms and conditions set forth below.
General Terms and Conditions
Purchaser must pay all labor and shipping charges necessary to replace product covered by this warran-
ty. This warranty shall not apply to products which, in the sole judgement of Aurora, have been subject to
negligence, abuse, accident, misapplication, tampering, alteration; nor due to improper installation, oper-
ation, maintenance or storage; nor to other than normal application, use or service, including but not lim-
ited to, operational failures caused by corrosion, rust or other foreign materials in the system, or operation
at pressures in excess of recommended maximums.
Requests for service under this warranty shall be made by contacting the installing Aurora/Wicor dealer as
soon as possible after the discovery of any alleged defect. Aurora will subsequently take corrective action
as promptly as reasonably possible. No requests for service under this warranty will be accepted if
received more than 30 days after the term of the warranty.
The warranty on all three phase submersible motors is void if three-leg overload protection of recom-
mended size is not used.
This warranty sets forth Auroras sole obligation and purchasers exclusive remedy for defective products.
AURORA SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAM-
AGES WHATSOEVER.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WAR-
RANTIES. IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND
BEYOND THE DURATION OF THE APPLICABLE EXPRESS WARRANTIES PROVIDED HEREIN.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations
on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Aurora Pump, 800 Airport Road, North Aurora, IL 60542
Aurora Pump 800 Airport Road North Aurora, IL 60542 630-859-7000 www.aurorapump.com
2006 Aurora Pump, North Aurora, IL