Вы находитесь на странице: 1из 8

DX 50

The Forklift With Proven Ability.

P N E U MATI C TI R E FO R K LI FT
15,40 0 18,000 LBS. CAPACITY | DIESEL
"Reducing Total Operating Costs" with
Komatsu Innovative Technologies

KOMATSU
Komatsu's Hydraulic System and the NEW Diesel Engine Reduce Fuel Consumption EXCLUSIVE

In order to minimize engine loading, the new DX50 Komatsu's Unique OLMS Hydraulic System
has adopted Komatsu's unique open-center load
moderating (OLMS) hydraulic system, and the
Contributes To Lower Fuel Consumption
compact 3.3-liter diesel engine to achieve superior The Hydraulic
As engine speedsloadchange,
is automatically
the enginedetected and onlycontrol
RPM sensing the appropriate
pump detects engine
amount
revs andofthen
oil iscontrols
supplied
thevia
oilafeed
variable displacement
to reduce the load pump.
on the This system
engine. This unique
performance and up to a 20% reduction in fuel eliminates the loss of hydraulic oil and reduces the engine load.
hydraulic system offers optimized balancing of traveling and loading work, while
consumption. delivering increased hydraulic efficiencies in the most demanding applications.

Optimally controlled hydraulic oil results in;


Optimized balancing of traveling and loading work
Fuel Consumption Lower fuel consumption with OLMS and the new

20% savings
compact 3.3 liter diesel engine.
Max. Variable
Accelerating Lightly Loaded displacement pump
Engine
RPM Control
Engine sensing valve
pump

Power Supply to Traction


Hydraulic Optimized Oil Feed
oil tank

Variable
Lifting Power Supply to Hydraulics displacement pump
Previous NEW DX50
Engine
Diesel Engine FD70-10
RPM Control
Engine sensing valve
Komatsu tested data, comparison with FD70-8. pump
The results may vary depending on conditions.

Hydraulic
oil tank

Greatly Reduced Total Operating Costs


The standard sealed wet disc brake system is
designed to withstand 10,000* hours of operation NTotal operating cost (*Image)
without maintenance, thereby eliminating downtime
and the added maintenance costs of frequent brake
shoe replacement. The engine oil replacement interval
has been extended to 500 hours, which reduces oil Total operating cost
costs. The reduced maintenance costs and significant
fuel savings provides a total operating cost reduction
of about 14% over eight years of usage. Previous
Approx. 14% savings
ni>
*A periodic check and oil replacement are necessary.

NRunning cost (Accumulated costs for 8 years)


Komatsu tested data,
Assuming FD70-8 as 100%; comparison with FD70-8 model.
Operation hours: 5 h/day,
25 days/month (Total: Approx. 1500 h/year),
max. Maintenance intervals to manufacturers recommendation.
LFuel costs NEW DX50 The results may vary depending on conditions.
20% savings Diesel Engine FD70-10

LBrake max.
maintenance 14% savings
costs

max. 1st year 2nd year 4th year 8th year


LEngine oil
costs 73% savings
2
KOMATSU
Advanced Technology Offers Reduced CO2 Emissions EXCLUSIVE

The new DX50 Series feature the SAA4D95LE-5-A compact A technologically advanced Diesel Engine that
3.3 liter engine in combination with Komatsu's efficient OLMS
hydraulic system to enable the reduction of CO2 emissions by Conforms to the Latest EPA Emission Regulations
approximately 7.8 tons annually. Low fuel consumption and low environmental impact are enabled by
elimination of excess combustion and the use of the combined technologies of
the high pressure common rail system, electronic control system,
Annual CO2 emissions new combustion system and air to air charge air cooling system.

About 7.8 tons reduction EPA Tier 3 / EU Stage IIIA Emission Compliant

CO2 CO2
78,100 lbs.-CO2 62,480 lbs.-CO2

SAA4D95LE-5-A
Previous NEW DX50 Displacement:
Diesel Engine FD70-10 3.3 liter
Rated Output:
Komatsu tested data, comparison with FD70-8 model. 92.5 HP @ 2,250 rpm
The results may vary depending on conditions.
Maximum Torque:
253 lb.-ft. @ 1,600 rpm

3
Superior "Productivity" and "Reliability"
Satisfy Demanding Operational Needs
KOMATSU
Durable Wet Disc Brakes to Withstand Severe Conditions EXCLUSIVE

The wet disc brake system is sealed with oil to block dust A Cooling System to Achieve
penetration, providing durable, water resistant and fade resistant
characteristics. Smooth, stable braking provides Productivity
Increased Braking Stability
and Reliability in demanding operations. The oil in the wet disc brake system is circulated through the brake oil
cooler. This mechanism ensures stable braking under a heavy work load
and prevents deterioration of the braking force that could be caused by
raised oil temperatures.

Brake oil cooler

Wet disc brake

Oil pump

NSteady braking is always achieved.


NOverheating of the brakes is prevented.
NDowntime and maintenance costs are reduced.

First-class Productivity is Achieved

First-class Cycle Time Fully Hydrostatic Power Steering


The new DX50 Series utilizes a technologically advanced, for Superb Maneuverability
compact 3.3-liter engine in conjunction with Komatsu's The FHPS (Fully Hydrostatic Power Steering) system facilitates
advanced OLMS hydraulic system. This advanced design fully stationary steering as well as switchback operations using
achieves high productivity and first class cycle times. the small diameter steering wheel. The system has a superior
response capability so that the operator can maneuver easily
The NEW DX50 Series achieves high productivity with a load even in a tight area.
equivalent to the previous DX20 Series.

Cycle time NEW DX50


Displacement
The 18,000 lb model offers a significant size
3.33 reduction
Diesel Engine FD70-10
The 18,000 lb. model features a shorter wheelbase and swift
Displacement Lifting Speed mobility while maintaining the power and speed capable of
achieving high productivity. The DX50 18,000 lb. model is an
ideal choice for confined spaces.

Previous Komatsu tested data, LLength


Displacement
5.93 Fuel consumption
comparison with
FD70-8 model.
The results may vary
193 in.
depending on conditions. 201 in. [Previous 18,000 lb. model]
LWidth
81 in.
EW

83 in. [Previous 18,000 lb. model]


LLifting Speed (Loaded) LTraveling Speed (Unloaded)
N

Diesel Engine FD70-10 Diesel Engine FD70-10


LTurning radius
88.5 fpm 19.3 mph 136 in.
142 in.
[Previous 18,000 lb. model]
4
Excellent Durability To Handle Demanding Work Cycles

Rugged Design with High Rigidity Engine Protection Systems To Keep


The high rigidity mast, frame, front and rear axles ensure the Engine in the Best Operating Condition
outstanding reliability even when performing heavy-duty work. The electronic engine controls upgrade the performance of
[Mast] the engine protection (fail-safe functions).
A heavy mast rail profile for excellent rigidity.
LTrouble diagnosis:
[Frame] Engine malfunctions are automatically detected and
The successful high rigidity structure of previous models is adopted. an alarm lamp blinks.
[Front axle] LOverheating prevention:
New field proven design adopted from Komatsu Wheel Leader The engine output and RPMs are reduced when
the coolant temperature exceeds limits.
Construction Equipment.
LAutomatic engine warm-up:
[Rear axle] The RPMs are accelerated to warm up the engine at Engine failure indicator
The durability of the power steering cylinder is improved. low temperatures.
LAutomatic air pre-heating:
The engine is automatically pre-heated when starting at low temperatures.
Improved Reliabilities for the Hydraulic and
Electrical Systems
The main hydraulic pipe connectors are face-sealed using
O-rings. Waterproof connectors are provided to the main
harnesses and the system controller in order to provide
higher resistance to water and dust.
Hydraulic and electrical piping systems
are in separate configurations to
improve the reliability and servicing.

Careful Designs Make Serviceability Easier

Filter Layout Optimized Easy Radiator Cleaning Wide Opening Engine Hood
for Improved Serviceability with a Lock for Easy Servicing
A fully-opening floor plate.
Fuel
pre-filter

Locking engine
hood provides
Relay and fuse boxes are protection while
Main fuel filter servicing 5
conveniently located.
Advanced Design in Pursuit of
"Safety and Comfort"
Effective Risk Reduction Systems

KOPS Plus - "Komatsu Operator Presence System"   


& )
!"#   $ $$ %$ $  & 
$  &  '  &     
   '
   (   () (
  & '$      
 '*  ))   $    

)  & ' (!"#    
+)  ) $ '
*The traveling interlocking function only disengages traction and does not automatically apply the brakes.
*KOPS Plus - Komatsu Operator Presence System ISO3691-1 compliant

A Neutral Safety Function To Prevent


an Inadvertent Start
+    ,- )
  $ '
   
 
 

Parking Brake Alarm


$   $ + (
 )  '
* +
 $+ & 
$ &   

ISO-Compliant Enhanced
Overhead Guard for Operator's Protection

Greater Operator Comfort and Reduced Fatigue In Even The Toughest Applications

Full Suspension Seat and Floating Cab Structure Comfortable Braking with the Organ-type Pedal
Absorb Vibrations   $$ ) 
 8  $    $ & &+  $   + 
         + '+  + )
  +  ++       '
  ++      
&+      
     '
&   $ 
$       '
Low Noise Design
s Six-step reclining backrest
s 6.7 slide distance
)   $   
backward and forward $  &   $ '
s Seat cushion adjustment dial
s Retractable seat belt
6
DX50 Series Specifications
GENERAL FD70T-10 FD80T-10
)  $  >    
$  $  = ) )
<$ L=C'9@##;  N + '9; A >"(C##9H(###; >?(###9?(###;
  , *8< , , '9; C =A9"?"; ="9@A";
G+  '9; " F#'@9=(A##; F#'@9=(A##;
WEIGHT
 &)9  =   ' Q  ; + '9; @ =#(A?#9F(=C"; =C(#"#9>#(F>#;
  ,  + '9; H A>("F#9>C(AA#; A@("=#9>@("@";
- + '9; ? C(==#9>(F>"; "(>H#9=(AC";
*8 
T  ,  + '9; F ?(=>#9A(H="; F(C>#9C(=H#;
- + '9; ># >=(>H#9"("=#; >C(@C#9@(@C#;
TIRE
  $  >>  
  U(   >= ?'=">">C-9; ?'=">">?-9;
  U(    >A ?'=">">C-9; ?'=">">?-9;
+ )( W  8Y & >C C8W= C8W=
  9   ; ,  '9; >" "H'F9>(CH#; @#'@9>("C#;
- '9; >@ @C'@9>(@C#; @C'@9>(@C#;
DIMENSIONS
(= 9,Z;  ( ) W+)  ' >H @W>= @W>=
[ ()  9=   ' ; '9; >? >#>'?9=("?"; >#@'H9=(H>#;
, 9=   ' ; '9; >F ?'H9==#; ?'H9==#;
[ (8  9=   ' ;\ '9; =# >H>'A9C(A"#; >H>'A9C(A"#;
[8 9=   ' ;NN '9; => >>?9A(###; >>?9A(###;

&    '9; == F@'>9=(CC#; F@'>9=(CC#;


() ',  '9; =A >??'C9C(H?"; >F='"9C(?F#;
 9=  ; '9; =C >C#'C9A("@"; >CC'"9A(@H#;
& ) ( &  9 ; '9; =" H?9>(F?#; ?#'H9=(#"#;
,  ( 8) 8 ' =@ ='@8"'F8C? ='@8@'H8C?
,  ( 8) 8  =H @"8>"#8>(==# @"8>H#8>(==#
< ) W*< '9; =? @@'"9>(@F#;WZ H#'F9>(?##;WZ
]   (    '9; =F ?'H9==#; F'A9=A";
]   ( )+  '9; A# >>'@9=F"; >>'@9=F";
-  \\ '9; A> >"C'F9A(FA"; >@#'?9C(#?";
    (   '9; A= >A>'F9A(A"#; >A"'?9A(C"#;
PERFORMANCE
 & $ ( ) (  > W=  $9W; AA @'?W>?9>>W=F; @'?W>@'=9>>W=@;
 & $ ( ) (  > W=  $9W; AC H'"W>F'A9>=WA>; H'"W>F'A9>=WA>;
 $ (  W  9=  ; $9W ; A" ?F9C"#;WF?9"##; HF9C##;W?F9C"#;
)  $ (  W  9=  ; $9W ; A@ FC9C?#;WF?9"##; F>9C@#;WF?9"##;
[8 )+ $(   + '9; AH F(?F#9CC; F(?F#9CC;
[8  + ^ A? =F'# =C'#
 &+ ($ W   AF ,W
 ,W

 + ($ W   C#
 W[
 W[
 ( $  C> ,
 ,

J WZW<$ "   ZW* C= =CW"= =CW"=
DRIVE
`[  W`   CA  **CF"`"*  **CF"`"*
- $9*`;
9G;L $ CC FA9@F;L=(="# FA9@F;L=(="#
[8 %9*`; +9;L $ C" ="A9ACA;L>(@## ="A9ACA;L>(@##
'   W  $ ''9A; C@ CW>FF9A(=@#; CW>FF9A(=@#;
,$  T'' 9 ; CH AH9>C#; AH9>C#;
OTHER
-$   (8 $ 9+ ; C? =(@##9>?>; =(@##9>?>;
     CF -a,G -a,G
`b[ &  ) $+    '  (  & +)  `  $  +       )'
$     +    ) %$$ ( )    $  '
  $c       8  $c  ) (   $ $  $$)   U   '
N$  ( (     (       ) $ '<   U   '
NN   &+'[***        '<   U   '
\  C?9>(==#; +  '<   U   '
\\*  $  
Dimensions Load capacity curve
=@9); FD70 FD80
15,400 18,000
(7000) (8000)
<$ +9;

<$ +9;

13,200 15,400
=" =? >" >@ (6000) (7000)
11,000 13,200
(5000) (6000)

A=
8,800 11,000
(4000) (5000)
6,600 8,800
>H (3000) (4000)
,G J
24 39 55 71 24 39 55 71
(600) (1000) (1400) (1800) (600) (1000) (1400) (1800)
=#
  9;   9;
=>
>?
==

>F =@9;

=F A#
C "
=@9; =C
=A 7
Building on our 80 year history of superior
engineering, the DX50 Series delivers on
productivity, reliability, and lower life-cycle costs
while working your most demanding applications.

DX50 Series
PNEUMATIC TIRE FORKLIFT

STRONG CUSTOMER SATISFACTION


Komatsu Forklift has a strong corporate commitment to produce,
deliver and support quality products, and we have always made
customer satisfaction our top priority. We will work to the best of
our ability to help you maximize your operations productivity while
minimizing costs.
KOMATSU DEALER NETWORK
QUALITY PRODUCTS & SERVICES Komatsu Forklift has over 195
dealer locations throughout the
Komatsu Forklift offers an expanding product line of over 120 electric
United States, Canada, Mexico,
and internal combustion engine forklift models with capacities from the Caribbean, and Central and
2,000 to 35,000 pounds. We back them with a complete warranty South America. Komatsu dealers
program, superior service, and genuine OEM parts. are staffed with dedicated teams
of professionals who are trained
CONTACT YOUR DEALER TODAY to meet your forklift needs.
Your nearby Komatsu Forklift dealer is ready to assist you. Ask about
nancing and leasing programs that can be tailored to your business
plan. Forklifts for your specic applications and workplace are waiting
for you now.

THE KOMATSU HERITAGE


As part of the Komatsu family, we have a proud heritage of
excellence in equipment design and manufacturing. Since
1921 Komatsu has been a global leader in the construction
and mining equipment industry. And since 1945, we have
built upon that heritage by producing innovative, high-
quality, durable forklifts to meet and exceed the needs of
our customers.

KOM93-01 2011 Komatsu America Corp. Printed in USA D07(500)CCI 7/11 (EV-1)

www.KomatsuAmerica.com Komatsu America Corp. is an authorized licensee of Komatsu Ltd.


Materials and specications are subject to change without notice.
www.KomatsuForkliftUSA.com Photos may include optional equipment.
is a registered trademark of Komatsu Ltd., Japan

Вам также может понравиться