Академический Документы
Профессиональный Документы
Культура Документы
A1011 HSLAS GR 55
Dimensions
Grade Product Type Thickness Width
(Inches) (Inches)
HSLAS Grade 55 Class 1 Coils 0.079- 0.229 39.4- 73.2
1)
Inquire availability.
Mechanical Properties
Tensile testing is performed in the longitudinal direction.
Grade Product Type Thickness Yield Strength Tensile Strength Elongation in 2 1)
(Inches) (min ksi) (min ksi) (min %)
HSLAS Grade 55 Coils 0.079- 0.229 55 70 20
Class 1
1)
For thicknesses from 0.097 in. down to 0.079, the minimum Elongation is 18%
Chemical Composition
(Heat analysis, wt. %. maximum, unless indicated)
Grade C Mn P S Ti 1) V 1) Cb 1) Ni Mo Cu 2) Cr
(wt %) (wt %) (wt %) (wt %) (min wt (min wt (min wt (wt %) (wt %) (min wt (wt %)
%) %) %) %)
HSLAS 0.25 1.35 0.04 0.04 0.005 0.005 0.005 0.20 0.06 0.20 0.15
Grade 55
Class 1
1)
One or more of Cb, V, and Ti may be added. When added the min for that element applies, if not added then there is no minimum requirement
2)
Copper steel with 0.20% minimum Cu.
Contact Information
www.ssab.com/contact
For referenced ASTM standards, visit the ASTM website, www.astm.org. The information contained herein is only intended to provide guidance relative to SSABs capability to
supply products complying with the requirements of the referenced ASTM standards. The information contained herein is in no way a guarantee or warranty of SSAB product. In
the event of an order, the specifications as stated in the purchase order and any subsequent order acknowledgment establish the basis for any product specifications, require-
ments and/or guarantees.