Вы находитесь на странице: 1из 3

Examen de Evaluacin API 572

1.-Out of the many methods of inspection ___________ is considered the most important and
the most universally accepted method of inspection.
Radiographic examination

Careful visual inspection.

Ultrasonic thickness measurement.

Hammer testing.
2.-Several different methods are used to construct pressure vessels. Most pressure vessels
are constructed today using _________ construction.
Welded

Hot forged.

Riveted

Multilayer.
3.-the most common material used to construct pressure vessels is:
Titanium

Austenitic stainless steel.

Monel.

Carbon steel.
4.-Construction codes are periodically revised as the designs of pressure vessels improve and
as new construction materials become available. A pressure vessel should be maintained
according to the:
Requirements under which it was designed and constructed.

Standards and specifications of the owner/user.

Principles and specifications of the jurisdiction.

Guidelines of the NBIC.


5.-The basic reasons for inspection are:
To meet the prerequisites of the ASME Code.

To fulfill the provisions of the API 510.


To satisfy the requirements of OSHA.
To determine the physical condition of the vessel and to determine the type, rate, and
causes of deterioration.
6.-The external inspection of a pressure vessel should start with:
Vessel foundation and anchor bolts

Ladders, stairways, platforms, or walkways connected or bearing on the vessel.

Nozzles and connecting piping.

Protective coatings and insulation


7.-What API standard is used for air cooled heat exchangers?
945

510

574

661
8.-Which of the following are causes of faulty fabrication?
Improper fit

Poor welding

Improper heat treatment

All the above.


9.-External inspections of pressure vessels should start with which of the following:
Ladders, stairways

Ladders, foundations

Guy wires, supports.

Nozzles, anchor bolts


10.-the most important conditions to check when examining metallic linings are:
That there is no corrosion

That no holes or cracks exist

That linings are properly installed.

All the above.


11.-Where water is used as a cooling or condensing medium they are generally made of tubes
copper based alloy
stainless steels
monel based alloy

iron.
12.-Pressure vessels constructed out of nonmetallic materials are usually made from FRP and
can be more resistant to some
corrosive services

caustic services

H2S servicies

water services

Вам также может понравиться