Академический Документы
Профессиональный Документы
Культура Документы
,Ltd
At present, wearable castings have been widely used in mining, cement, electricity, road
construction machinery and refractory materials. Wearable castings are difficult to
machine because of the irregular surface, uneven hardness, a large number of hard spots
and other reasons. In addition, when machining the wear-resistant parts, it will produce a
greater cutting force and cutting heat, which will resulting in greater vibration and shock,
will accelerate the wear of the tool, if use ordinary carbide cutting tools, it will often chip,
which will result in processing costs increasing. In view of this phenomenon, We
recommend to use cbn inserts, especially BN-K1.
www.halnncbn.com
Halnn Superhard Materials Co.,Ltd
The cutting data: cutting depth will be less than 2mm, and the feed rate will be
0.05~0.4mm/r, cutting speed will be 80m/min.
Need to note that: youd better use dry cutting, because cbn insert will react with the water
vapor in the high temperature with 1000. If using cutting fluid, you need to use oil cold
method.
4. Conclusion
Cubic boron nitride Insert has become a special tool for machining nickel-chrome chilled
cast iron, high-chromium cast iron and already widely used for the wear resistant casting.
Practice has proved that CBN Insert processing efficiency, long tool life, low processing
costs, to solve the processing problems of wearable castings, material cutting is a
technological innovation. In addition, the application of CBN Insert to promote the
development of the coal mill industry, worthy of application promotion.
www.halnncbn.com