Академический Документы
Профессиональный Документы
Культура Документы
Page 2 of 6
2042464 it has been mentioned. Therefore its data structures can only be activated
from support package SPS 1508 but in transaction KEA0 it is not adapted any more.
In a support package before 1508 changes unfortunately are still possible. However
changes should not be made. Do not delete or change it as it is a template operating
concern.
10. Some field length's in SAP S/4HANA have been increased to 40
characters. Why in CO-PA the characteristic length has not been
increased?
The maximum field length of the material number (MARA-MATNR) has been
extended to 40 from 18 characters in SAP S/4HANA, on-premise edition 1511. The
material number (ARTNR) in CO-PA is an exception as it is a fixed characteristic and
with a length of 40 from S/4HANA it is the only characteristic in CO-PA, on-premise
edition 1511. The maximum logical limit on length of CO-PA characteristic is 18
characters. Due to limitation of length of database table, the limit is set. On maximum
number of characteristics and value fields this has dependency that can be defined in
an operating concern. Therefore due to technical constraints an extension of this
length for other characteristics is impossible.
11. Why on the PA segment screen the characteristic 'SEGMENT' is
grayed out?
To be able to report on it in SFIN characteristic to the operating concern SEGMENT
was added as fixed characteristic. Directly from the profit center SEGMENT
characteristic is derived and hence on the PA segment screen it cannot be
changeable manually. Furthermore in the profitability segment a manual entry would
only be visible but from the CO-PA account assignment screen it would not be
returned to the document item to be posted (on the CO-PA account assignment
screen the only fields you can enter which are transferred back are the PRCTR,
FKBER and for one special case GSBER). Between FI and COPA this would result in
inconsistency for an important characteristic like SEGMENT and hence for manual
entry it is not open.
12. What is maximum no of characteristics available in S/4HANA
Financials?
Previously the limit was 50 and now the maximum no. of characteristics in an
operating concern has been increased to 60 in S/4HANA Financials.
13. What about the summarization levels (tcode KEDV), Are they
going to be use any longer?
Since the HANA DB is very fast in retrieving data so YES summarization levels are
obsolete in S/4 HANA.
There is only exception is the extraction of account-based data to BW.
14. Are G/L allocations like FAGLGA15 applicable to CO-PA ? What
are accredited PA segments ?
G/L allocations, usually dont post to CO-PA. For allocating costs to CO-PA you can
utilize the cost center allocation via transaction KEU5. The profitability segment is
written by transaction FAGLGA15, because of the reason that in S/4 HANA
(Finance), the "attributed" profitability segments can be determined for specific G/L
line items. Although this reason does not help in creating an account-based
document, however is only able to regulate the additional attributes for the G/L line
items which are written to ACDOA, which is the G/L line item table. This is all made
Page 3 of 6
possible through mapping all CO-PA fields of a G/L line item to their corresponding
CO-PA characteristics and calling out the CO-PA derivation tool. The result is then
written back to the equivalent fields of table ACDOCA.
This particular logic affects all the income statement items In S/4 HANA Finance
1503 and S/4 HANA OP 1511. Right from S/4 HANA Finance 1605 and S/4 HANA
OP 1610 are the only line items which are activated in customizing (IMG ->
Controlling -> Profitability Analysis -> Master Data -> Activate Derivation for
Items without Profitability Segment) and are the only such line items which carry a
true CO account assignment and are therefore considered. No more attributing
should take place from any G/L allocations, from these two releases because in G/L
allocations CO account assignments are not appropriate, except the ones listed as
attributes in table ACDOCA, however this is applicable only for a true or statistical
CO account assignment.
15. Why are 3 new fields (Functional Area, Segment and Cost Center)
added to the CE1XXXX table, After migration to S/4 HANA Finance?
The CO-PA characteristics- SEGMENT, COPA_KOSTL (cost center), and FKBER
(functional area) have all been introduced as fixed CO-PA characteristics from
release S/4 Hana Finance 1503 (sFIN 2.0). Therefore all these are a part of the
Operating Concern data structure and have been added to the CO-PA tables. If the
values have been populated in the coding block (COBL) by the source application,
these characteristics are all fixed characteristics, are all automatically filled.
16. In an Intercompany sales order, how is the customer derived?
The plant & sales org belong to separate different company codes, in an inter-
company sales order/contract.
For Instance:
Sales org S140 belongs to company code C140
Plant P010 belongs to company code C010
The segment number of the sales order item come with the internal view (with the
supplying company code) and due to this, it gets a different customer from SD
instead of the incoming sales order line item in CO-PA which portray the external
view (With the selling company code) and hence from the sales order it gets sold-to
party as customer value.
17. On the PA segment, why are few characteristics grayed out?
The present system design is in such a manner that field values which have been
taken over via TKEZU table into CO-PA are grayed out on the profitability segment
screen (even in case of initial value), and this done to ensure uniformity between SD
data and segment number. Please refer SAP Document 638097 is a workaround to
modify this behavior (by clearing the INPUT flag for allowing manual entries).
18. During retraction of data into COPA (tcode KELR), Is valuation
possible?
Yes, validation is possible incase you are retracting plan data the program to be
processed is ZXKKEU04. For actual data retraction use program ZXKKEU03.
19. When running a report in KE30 using ABC Analysis, why is
message no. KH-631 displayed?
Incase, positive and negatives values are present in a column, then and analysis
of ABC is not possible and the error KH-681 will be displayed. The ABC analysis is
Page 4 of 6
only meant for positive values. Upon selecting the column which contains only
positive values, then ABC analysis can be executed.
A call to the ABC analysis for values with negative and positive values cannot be
evaluated in the ABC analysis.
20. Can the default "PA transfer structure FI" for direct FI/MM
Postings be changed to a different structure?
No, the default structure for Direct FI/MM posting cannot be changed as it is
hardcoded in the system to refer to the PA transfer structure FI for record type B
posting in CO-PA. You will end up with the KF018 error during record type B (FI/MM
postings), Incase you do not have the Cost Element mapped in the PA transfer
structure.
21. How is the posting date resolute in CO-PA for a record type F
document?
The posting date in CO-PA is in principle from the invoice date (VBRK-FKDAT). In
case of KE4S we consider the same date and period from the original CO-PA
document for the reversal and the reposted CO-PA document. However, few
customers modify the standard behavior in KE4S using SD
exit USEREXIT_PRICING_PREPARE_TKOMK (Include RV60AFZZ)
22. How can you make entries in the generated check tables T25NN
for avoiding error KE0C133?
By using t-code KES1, you can populate the generated check tables T25NN.
23. Is KE4MS called during planning?
As listed in the SAP Document 842127 KE21S: Calling
module COPA_UPDATE_STANDARD_MEASURES in plan" in case of actual data,
KE4MS is only called for valuation. To have the same functionality as KE4MS in
planning the only option is to use user exit COPA0002.
24. What dos this mean: You receive the information message 'SQL
error: 443' in KEDU?
'SQL error: 443-' This is an information message which is at times raised
immediately after starting a job in transaction KEDU . These information messages
are forced by note 407312 (which is part of your SP) and can be left ignored as long
as RKETRERU can create the summarization levels with status 'Active'.
25. How to add a new characteristic? What database tables are
affected?
For adding new characteristic please check the documentation of CO-PA
customizing in transaction ORKE: -> Structures -> Define Operating Concern ->
Maintain Characteristics.
When a user add some new characterstics then a new field (column) also gets added
to CO-PA tables.
Now if the costing is based on COPA then the tables would be CE1XXXX,
CE2XXXX, CE3XXXX, CE4XXXX, CE4XXXX_ACCT,
CE4XXXX_KENC and CE4XXXX_FLAG (XXXX = operating concern).
If only classical account based is active then the tables would be CE4XXXX,
CE4XXXX_ACCT, CE4XXXX_KENC and CE4XXXX_FLAG (XXXX = operating
concern).
If the account based COPA in S/4 HANA besides the above then the table ACDOCA
is also affected.
Page 5 of 6
If only the combined CO-PA tables CE9XXXX_KENC and CE9XXXX_H gets affected
alongwith the tables of costing based CO-PA.
https://www.stechies.com/copa-issues-s4-hana-finance-sfin/
Page 6 of 6