. a) Derivean equation which gives the relation between sound
tensity level and sound pressure level. Show that as the
distance from a point source doubles, the sound intensity
level decreases by 6 ¢B.
) Explain the working of Sound Level Meter and Sound
Frequency Analyzer,
Explain in brief, following with respect to noise
4) Octava band analysis
ii) Noise standards and limits
iil) Noise control techniques
Roll No
MMMD/MMPD-205
M.E./M.Tech., II Semester
Examination, June-2013
Vibration And Noise Control
Time : Three Hours
Maximum Marks : 70
Note: Attempt any five questions
All questionss carry egucl marks
Assume buiiable data, if necessary.
L. a) Definethe flexibility and stiffness influence coefficients,
What isthe relation between them?
1) Find the natural frequencies and mode shapes of the
system shown in fig-1
fork; and,
fig
RGPVONLINE.COM
2. Determine the influence coefficients of the spring mass
system shown in fig-2 and hence find out the natural
frequencies using the method of matrix iteration»
»
‘A uniform beam fixed atone end and simpy suppomed at
the other is having tansverse vibrations. Derive the
suitable expression for frequency.
Determine the equation forthe natural frequencies ofa
‘uniform rod in torsional oscilation with ane end fixed
and the other end fre,
‘What is the purpose of Experimental Model Analysis?
Deseribe the use of frequency response function in
Model Analysis.
Write a shori oie 64 “Coalition Monitoring and
diagnosis”
What isthe difference vibration isolator and vibration
absorber? Explain the principle of working of an ua-
damped dynamic vibration absorber.
MuMonMPD.ons Pro
»
a
»
6)
‘Aheavy machine ofmassm is mounted through arent
system ona foundation. The resilient system comprises
fof a spring of stfiess ke and a viscous damper with
damping coefficient ¢, the machine produces an
excitation forwe F(t) =F, sin wt
Dative the formula for total froe transmitted to the
Foundation and prove that the forcing frequency should
bbe greater than > times the natural frequency ofthe
system in order 1 achieve vibration isolation,
‘Whats the souree of nonlinearity in Duffing's equation?
How isthe frequency ofthe solution of Dufing equation
{affected by thenature ofthe spring?
A single dopre of feedom shown in Fig-3 is subjected
to. force whose spectral density sa white noise S,(W)
,-Find the folowing,
|) Complex fequency response function ofthe system
ii) Power spectral density ofthe response
iil) Meansquare value ofthe response
ROPVONLINE;SOM
K a
si
se
x0
fia
aiaano0-205 Pro