Академический Документы
Профессиональный Документы
Культура Документы
GTM Gearbox
High Precision, In-Line Planetary Gearbox
GTE Gearbox
Economy, In-line Planetary Gearbox
GTMR Gearbox
High Precision, Right-Angle Gearbox
GTS Gearbox
Planetary Gearbox With Spur Gears
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTM Rigid Design
Rigid Design
The GTMs compact housing provides high
rigidity, which helps to resist high axial and
radial loads.
Using the largest possible tapered roller
bearings in the available space, greater
bearing surfaces are created. This
translates into longer life and more load
capacity for the gearbox.
The output shaft and planet carrier is of one-
piece construction.
A backlash-free torque transmission is
obtained by using a solid compression
coupling
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTM Rigid Design
The fused sungear and input coupling provide
up to 1000 emergency stops without loss of
precision. The competition does not attempt
to make this claim after even one E-stop.
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTM Lubricated for Life
Patented CC tapered-roller-
bearing construction Lubrication
The unique construction of the tapered roller
bearings provides the added benefit of
assuring adequate lubrication. The bearing
movement distributes the oil with a pumping
action throughout the gearbox.
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTM Lubricated for Life
A special coating on the ring gear assists in
the lubrication of the planetary set.
Viton seals
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTM Compact Design
Compact Design
Small INTERNAL cavities
Runs quieter
Smaller internal cross-sectional areas and specially-
designed teeth make the GTM up to 10 dB quieter
than the GTP and GTS.
The small internal cavity reflects less noise.
Theoretically-optimized gear shaping contributes to
noise reduction.
Drops-in to alpha applications
External dimensions were intentionally made larger to
match the alpha SP-series to allow for easy
replacement.
Wider base The patented CC design allows higher
radial loads on the output simultaneously
Same EXTERNAL dimensions taking up less space near the output.
as the GTS Notice the wider base for distribution of the radial
loads.
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTM Viton Seals
Viton Seals
Input seal Run cooler
The seals were kept to the smallest diameter possible
giving them lower surface speed. Result:
Efficiencies 2% higher than the GTS
97% vs 95%
Temperatures 10 C below the GTS
Allow higher speeds continuously
Up to 10,000 rpm S1-operation is allowed!
Have continuous operation as standard
There is no need to order a derated version.
Provide IP65 protection
The seals keep the oil in.
Output seal
They keep contaminants out.
The GTS provides only an IP64 rating!
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTE An Economical Solution
Introducing the GTE gearbox
Our low-cost, in-line planetary
Has a NEMA-type C-face
5 sizes similar in torque to GTM060 - GTM140
Ratios 3, 4, 5, 7, 8, 9 and 10:1 plus
12, 15, 16, 20, 25, 35, 40, 50, 70, 100
More to follow soon
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTMR Standard Features
Six Sizes - 90, 115, 140, 170, 215 and
Hypoid (up to 15:1) 260mm output flange
Torque from 25 to 1440 Nm continuous
Planetary Input speeds up to 6000 rpm continuous
(over 30:1)
Tight backlash
< 4 arcmin standard
< 2 arcmin reduced (+10%)
Rated for 30,000 hours of life
High efficiency throughout speed range
96% for ratios 3:1 through 10:1
93% for ratios 12:1 & 15:1
92% for ratios 30:1 and higher
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.
GTMR Standard Features
Tapered Roller Bearings
Allow high radial and axial forces
Synthetic Oil
Maintenance free
Metal-Bellows Coupling on Input
Allows for shaft misalignment
Allows for thermal expansion
2007 Bosch Rexroth Corp. All rights reserved by Bosch Rexroth Corporation, even and especially in cases of proprietary rights applications.
We also retain sole power of disposal, including all rights relating to copying, transmission and dissemination.