Академический Документы
Профессиональный Документы
Культура Документы
1 Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1
has sent a SYN message to begin session establishment. What happens next?
Host1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2.
Host1 sends a segment with the ACK flag = 1, SYN flag = 0 to Host2.
Host1 sends a segment with the ACK flag = 1, SYN flag = 1 to Host2.
Host2 sends a segment with the ACK flag = 0, SYN flag = 1 to Host1.
Host2 sends a segment with the ACK flag = 1, SYN flag = 0 to Host1.
*Host2 sends a segment with the ACK flag = 1, SYN flag = 1 to Host1.
3 Refer to the exhibit. What two pieces of information can be determined from the output that
is shown? (Choose two.)
*The local host is using three client sessions.
*The local host is using web sessions to a remote server.
The local host is listening for TCP connections using public addresses.
The local host is using well-known port numbers to identify the source ports.
The local host is performing the three-way handshake with 192.168.1.101:1037.
5 During a TCP communication session, if the packets arrive to the destination out of order,
what will happen to the original message?
The packets will not be delivered.
The packets will be retransmitted from the source.
*The packets will be delivered and reassembled at the destination.
The packets will be delivered and not reassembled at the destination.
6 Which OSI model layer is responsible for regulating the flow of information from source to
destination, reliably and accurately?
application
presentation
session
*transport
network
8 With TCP/IP data encapsulation, which range of port numbers identifies all well-known
applications?
0 to 255
256 to 1022
*0 to 1023
1024 to 2047
49153 to 65535
9 What mechanism is used by TCP to provide flow control as segments travel from source to
destination?
sequence numbers
session establishment
*window size
acknowledgments
10 Based on the transport layer header shown in the diagram, which of the following
statements describe the established session? (Choose two.)
This is a UDP header.
*This contains a Telnet request.
This contains a TFTP data transfer.
The return packet from this remote host will have an Acknowledgement Number of 43693.
This is a TCP header.
11 Which transport layer protocol provides low overhead and would be used for applications
which do not require reliable data delivery?
TCP
IP
*UDP
HTTP
DNS
12 Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being
performed?
*session establishment
segment retransmit
data transfer
session disconnect
13 Which information is found in both the TCP and UDP header information?
sequencing
flow control
acknowledgments
*source and destination port
16 Which three features allow TCP to reliably and accurately track the transmission of data
from source to destination? (Choose three.)
*flow control
urgent pointer
best effort delivery
*session establishment
connectionless services
*numbering and sequencing
18 After a web browser makes a request to a web server that is listening to the standard port,
what will be the source port number in the TCP header of the response from the server?
13
53
*80
1024
1728
19 What are two features of the User Datagram Protocol (UDP)? (Choose two.)
flow control
*low overhead
*connectionless
connection-oriented
sequence and acknowledgements
20 Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the
download process, Server 1 does not receive an acknowledgment from Host A for several
bytes of transferred data. What action will Server 1 take as a result?
create a Layer 1 jam signal
*reach a timeout and resend the data that needs to be acknowledged
send a RESET bit to the host
What actions will occur after RouterA loses connectivity to network 114.125.16.0? (Choose two.)
**RouterB will include network 123.92.76.0 and 136.125.85.0 in its update to RouterA.
During the next update interval, RouterB will send a RIP update out both ports that includes the inaccessible
network.
During the next update interval, RouterC will send an update to RouterB stating that network 114.125.16.0 is
accessible in 2 hops.
**Router C will learn of the loss of connectivity to network 114.125.16.0 from RouterB.
RouterB will include network 123.92.76.0 and 136.125.85.0 in its update to RouterC.
2
What does a router running RIP do first with a new route that is received from an advertisement?
3
Refer to the exhibit. If all routers are using RIP, how many rounds of updates will occur before all routers know all
networks?
1
2
**3
4
5
6
4
Which of the following methods does split horizon use to reduce incorrect routing information?
Refer to the exhibit. The routers in this network are running RIP. Router A has not received an update from
Router B in over three minutes. How will Router A respond?
The Holddown timer will wait to remove the route from the table for 60 seconds.
**The Invalid timer will mark the route as unusable if an update has not been received in 180 seconds.
The Update timer will request an update for routes that were learned from Router B.
The Hello timer will expire after 10 seconds and the route will be flushed out of the routing table.
The graphic shows a network that is configured to use RIP routing protocol. Router2 detects that the link to
Router1 has gone down. It then advertises the network for this link with a hop count metric of 16. Which routing
loop prevention mechanism is in effect?
split horizon
error condition
hold-down timer
**route poisoning
count to infinity
7
Which two statements describe EIGRP? (Choose two.)
8
Which event will cause a triggered update?
uses a broadcast to update all other routers in the network every 60 seconds
uses a multicast address to update other routers every 90 seconds
**will send out an update if there is a failure of a link
updates only contain information about routes that have changed since last update
10
Which two statements are true regarding the function of the RIPv1 routing updates? (Choose two).
updates are broadcast only when there are changes to the topology
**updates are broadcast at regular intervals
broadcast are sent to 0.0.0.0
**broadcasts are sent to 255.255.255.255
updates contain the entire network topology
only changes are included in the updates
11
A network administrator is evaluating RIP versus EIGRP for a new network. The network will be sensitive to
congestion and must respond quickly to topology changes. What are two good reasons to choose EIGRP instead
of RIP in this case? (Choose two.)
12
Which two conditions are most likely to cause a routing loop? (Choose two.)
random jitter
implementation of classful addressing
**inconsistent routing tables
**incorrectly configured static routes
a network converging too quickly
13
What metric does the RIP routing protocol consider to be infinity?
0
15
**16
224
255
14
What does the RIP holddown timer do?
Refer to the exhibit. What path will packets from the 192.168.1.0/24 network travel to reach the 10.0.0.0/8
network if RIP is the active routing protocol?
The path will be router A -> router B -> router C -> router E.
**The path will be router A -> router D -> router E
Router A will load balance between the router A -> router D -> router E and router A -> router B -> router C ->
router E path
Packets will alternate paths depending on the order they arrive at router A.
16
Three routers running a distance-vector routing protocol lost all power, including the battery backups. When the
routers reload, what will happen?
They will share all routes saved in NVRAM prior to the power loss with their directly connected neighbors.
They will multicast hello packets to all other routers in the network to establish neighbor adjacencie
**They will send updates that include only directly connected routes to their directly connected neighbor
They will broadcast their full routing table to all routers in the networ
17
What is a routing loop?
a packet bouncing back and forth between two loopback interfaces on a route
a condition where a return path from a destination is different from the outbound path forming a "loop
**a condition where a packet is constantly transmitted within a series of routers without ever reaching its intended
destinatio
the distribution of routes from one routing protocol into another
18
Which statement is true regarding cisco’s RIP_JITTER variable?
It prevents the synchronization of routing updates by buffering the updates as they leave the router interface
**It prevents the synchronization of routing updates by subtracting a random length of time ranging from 0% to
15% of the specified interval time from the next routing update
It prevents the synchronization of routing updates by causing the router to skip every other scheduled update tim
It prevents the synchronization of routing updates by forcing the router to listen when its time for other updates on
the lines before sending it
19
Which three routing protocols are distance vector routing protocols? (Choose three).
**RIPv
**EIGR
OSP
IS-I
**RIPv
20
Which of the following can exist in a distance vector network that has not converged? (Choose three).
**routing loops
**inconsistent traffic forwarding
no traffic forwarding until system converges
**inconsistent routing table entries
routing table updates sent to wrong destinations
21
What is the purpose of the TTL field in the IP header?
Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose
two.)
The local host is using well-known port numbers to identify the source ports.
**A termination request has been sent to 192.135.250.10.
**Communication with 64.100.173.42 is using HTTP Secure.
The local computer is accepting HTTP requests.
192.168.1.101:1042 is performing the three-way handshake with 128.107.229.50:80.
2 After a web browser makes a request to a web server that is listening to the standard port, what will be the
source port number in the TCP header of the response from the server?
13
53
**80
1024
1728
3 Which information is found in both the TCP and UDP header information?
sequencing
flow control
acknowledgments
**source and destination
Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process,
Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will
Server 1 take as a result?
create a Layer 1 jam signal
**reach a timeout and resend the data that needs to be acknowledged
send a RESET bit to the host
change the window size in the Layer 4 header
Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being performed?
**session establishment
segment retransmit
data transfer
session disconnect
7
Refer to the exhibit. The initial TCP exchange of data between two hosts is shown in the exhibit. Assuming an
initial sequence number of 0, what sequence number will be included in Acknowledgment 2 if Segment 6 is lost?
2
3
6
1850
**3431
3475
9 During a TCP communication session, if the packets arrive to the destination out of order, what will happen to
the original message?
The packets will not be delivered.
The packets will be retransmitted from the source.
**The packets will be delivered and reassembled at the destination.
The packets will be delivered and not reassembled at the destination.
10 With TCP/IP data encapsulation, which range of port numbers identifies all well-known applications?
0 to 255
256 to 1022
**0 to 1023
1024 to 2047
49153 to 65535
11 Which transport layer protocol provides low overhead and would be used for applications which do not require
reliable data delivery?
TCP
IP
**UDP
HTTP
DNS
12 What are two features of the User Datagram Protocol (UDP)? (Choose two.)
flow control
**low overhead
**connectionless
connection-oriented
sequence and acknowledgements
13 What mechanism is used by TCP to provide flow control as segments travel from source to destination?
sequence numbers
session establishment
**window size
acknowledgments
17 Which three features allow TCP to reliably and accurately track the transmission of data from source to
destination?
encapsulation
**flow control
connectionless services
**session establishment
**numbering and sequencing
best effort delivery
18 Which OSI model layer is responsible for regulating the flow of information from source to destination, reliably
and accurately?
application
presentation
session
**transport
network
19
Based on the transport layer header shown in the diagram, which of the following statements describe the
established session? (Choose two.)
This is a UDP header.
**This contains a Telnet request.
This contains a TFTP data transfer.
The return packet from this remote host will have an Acknowledgement Number of 43693.
**This is a TCP header.
21
Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN
message to begin session establishment. What happens next?
Host1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2.
Host1 sends a segment with the ACK flag = 1, SYN flag = 0 to Host2.
Host1 sends a segment with the ACK flag = 1, SYN flag = 1 to Host2.
Host2 sends a segment with the ACK flag = 0, SYN flag = 1 to Host1.
Host2 sends a segment with the ACK flag = 1, SYN flag = 0 to Host1.
**Host2 sends a segment with the ACK flag = 1, SYN flag = 1 to Host1.
_______
CCNA1 Chapter 4
1. Based on the transport layer header shown in the diagram, which of the following
statements describe the established session? (Choose two.)
This contains a Telnet request.
This is a TCP header.
2. With TCP/IP data encapsulation, which range of port numbers identifies all well-known
applications?
0 to 1023
3. Why are port numbers included in the TCP header of a segment?
to enable a receiving host to forward the data to the appropriate application
4. Which OSI model layer is responsible for regulating the flow of information from source
to destination, reliably and accurately?
transport
5. Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During
the download process, Server 1 does not
receive an acknowledgment from Host A for several bytes of transferred data. What action
will Server 1 take as a result?
reach a timeout and resend the data that needs to be acknowledged
6. Why is flow control used for TCP data transfer?
to prevent the receiver from being overwhelmed by incoming data
7. Which two options represent Layer 4 addressing? (Choose two.)
identifies the communicating applications
identifies multiple conversations between the hosts
8. Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being
performed?
session establishment
9. Refer to the exhibit. What two pieces of information can be determined from the output
that is shown? (Choose two.)
A termination request has been sent to 192.135.250.10.
Communication with 64.100.173.42 is using HTTP Secure.
10. Refer to the exhibit. The initial TCP exchange of data between two hosts is shown in the
exhibit.
Assuming an initial sequence number of 0, what sequence number will be included in
Acknowledgment 2 if Segment 6 is lost?
3431
11. What is dynamically selected by the source host when forwarding data?
source port
12. What are two features of the User Datagram Protocol (UDP)? (Choose two.)
low overhead
connectionless
13. What mechanism is used by TCP to provide flow control as segments travel from source
to destination?
window size
14. Which transport layer protocol provides low overhead and would be used for applications
which do not require reliable data delivery?
UDP
15. Which information is found in both the TCP and UDP header information?
source and destination
16. Which three features allow TCP to reliably and accurately track the transmission of data
from source to destination? (Choose three)
flow control
session establishment
numbering and sequencing
17. During a TCP communication session, if the packets arrive to the destination out of order,
what will happen to the original message?
The packets will be delivered and reassembled at the destination.
18. Which is an important characteristic of UDP?
minimal delays in data delivery
19. After a web browser makes a request to a web server that is listening to the standard port,
what will be the source port number in the TCP header of the response from the server?
80
20. Which event occurs during the transport layer three-way handshake?
TCP initializes the sequence numbers for the sessions.