Академический Документы
Профессиональный Документы
Культура Документы
training courses
2008-2009
from
Global
Pipeline
Monthly
supported by:
T HE COURSES described in this brochure continue represent some of the best-available
industry-based technical training courses for those working in the oil and gas pipeline
industry, both onshore and offshore. Ranging in length from one to five days, all are designed
to be both informative and intensive; some are well known and have been presented to
thousands of participants world-wide (the pipeline defect assessment course and the subsea
pipeline engineering course are examples of these), while some are still relatively new to
our programme. All, however, are presented by recognized industry experts, and all undergo
continuous development and improvement, based both on industry advances and participants’
feedback.
While each course can be considered as ‘stand-alone’, they all have been planned to fit into the
schematic shown opposite, with the intention of providing engineers and technical specialists
in this industry with a defined route for training and continuous professional development.
By following one or other of the various routes shown, an individual can be sure to receive an
intensive and complete overview of the different subjects involved, starting at the basic level
and progressing to an advanced understanding.
Clarion Technical Conferences and Global Pipeline Monthly are committed continuously to
update, revise, and augment this course programme, and for the latest information on what is
planned, readers are referred to www.clarion.org and www.pipeconferences.com.
Contents
Onshore Pipeline Engineering ................................................................... 6
Pipeline Pigging and In-line Inspection .................................................. 8
Introduction to In-Line Inspection of Pipelines . ................................... 9
Advanced In-Line Inspection of Pipelines . ........................................... 10
Defect Assessment in Pipelines . ..............................................................11
Direct Assessment Methods for Pipeline Integrity .............................. 13
Pipeline Mapping, GIS, and Data Integration .................................14
Excavation Inspection & Applied NDE for ILI/DA Validation
and Correlation ....................................................................................... 16
Pipeline Risk Management . ..................................................................... 17
Risk-based Management of Pipeline Integrity and Safety .................. 18
ILI Data Analysis for Pipeline Integrity Management . ....................... 20
Stress-Corrosion Cracking ......................................................................... 22
Microbiological Corrosion in Pipelines .................................................. 24
Pipeline Repair Methods/In-Service Welding . ...................................... 25
Performing Pipeline Rehabilitation......................................................... 26
Optimizing ILI Inspection Scheduling ............................................... ...28
DOT Pipeline Safety Regulations ............................................................ 29
2 Subsea Pipeline Engineering . .................................................................. 30 3
Subsea Production Systems Engineering ............................................... 32
Deepwater Riser Engineering .................................................................. 33
Administrative details
Course schedules........................................................................................ 4 - 5
Fees................................................................................................................ 36
Index by topic................................................................................................ 37
Index by title.................................................................................................. 38
Course dates and locations
Note: this information is subject to change please see www.clarion.org or www.pipeconferences.com for the latest details.
all dates 2009 except as shown
9-10 Feb
Excavation Inspection for ILI/DA Validation 20-21 Oct, 2008 9-11 Dec
26-28 Aug
10-Feb
Optimizing ILI Inspection Scheduling 9-Dec
26-Aug
9-10 Feb
Pigging & In-line Inspection 7-8 Dec
24-25 Aug
Pipeline Anomalies & Defects: Origins, Location, Sizing 20-21 Oct, 2008
9-10 Feb
Pipeline Mapping, GIS and Data Integration
26-27 Aug
9-10 Feb
Pipeline Repair Methods / In-Service Welding 20-21 Oct, 2008 16-18 Sept
25-27 Aug
9-10 Feb
Stress Corrosion Cracking in Pipelines
26-27 Aug
18-22 May
Subsea Pipeline Engineering 23-27 Feb
16-20 Nov
• Cracking mechanisms
have not received basic pipeline engineering training, and some staff are only exposed to specialized • Calculating corrosion rates
DAY 4
For fees, see areas. This course is a formal introduction to pipeline engineering. • Effect of flow on corrosion
External pipeline corrosion and its
page 36. • Water injection pipelines
prevention
Pipeline routing and construction
• External corrosion in soils
Who should attend and safety, and failure investigations in Europe, Asia,
• Coatings and their application
North America, and the Middle East. His previous • Basics of routing
• Field joints
work includes transmission pipeline projects, including • Classification schemes
• Engineers who are new to the pipeline business • Interaction of coatings and cathodic protection
surveilance projects, setting weld defect acceptance • Easements and rights of way
and those who wish to update their knowledge, • Monitoring of internal pipeline corrosion
levels for new oil and gas pipelines, routing of onshore • Legislation and permits
including: • Inhibition of corrosion
pipelines, material selection, risk analysis, and inspection • Routeing methodologies
• Biocide treatment of pipelines
and maintenance procedures. Phil has served on many • Pipeline construction
pipeline engineers, pipeline construction • Supplementary inspection techniques
national and international committees, including the
engineers, project managers, maintenance
British Standards Institution, the European Pipeline Group Project Exercise Part 1
engineers, contractors, supervisors, inspectors,
Research Group (co-chairman), the American Gas Group Project Exercise Part 2
operators, equipment suppliers, inspection and
Association’s Pipeline Research Committee, and the
quality engineers, pipeline design engineers.
DNV Pipeline Committee. He is currently chairman of
DAY 3
External pipeline corrosion and its
the executive committee of the ASME Pipeline Systems
• Engineers who need a wider appreciation of Pipeline project control prevention (cont’d)
Divison.
onshore pipeline engineering.
• Management • Cathodic protection
Dr Roger King has over 30 years’ experience of corrosion in • Scheduling and resource planning • How cathodic protection works
Documentation the oil, gas, civil, and nuclear industries. He has specialist • Execution • Monitoring of cp at test points
knowledge of sweet and sour corrosion and its prevention • Contracting strategies • Full line surveys with CIPS and instant of
• Included with the course fee is a detailed set by chemical inhibition, monitoring of corrosion, surveys
of lecture notes (700 pages, COLOR) and a microbiological corrosion, and the design of efficient Pipeline testing and operation • Coating surveys using Pearson and DCV
CD containing an additional 300 pages of text cathodic-protection systems for flowlines, structures, techniques
reference material. and seabed installations. He has been an independent • Hydrostatic testing • Interference from third party lines and AC/DC
consultant since September, 1989, and prior to this was • Operation systems
a founder member of the Corrosion and Protection • Inspection, maintenance and surveillance of
Lecturers Centre Industrial Service (CAPCIS) at the University of operational pipelines
Manchester Institute of Science and Technology (UMIST). DAY 5
Professor Phil Hopkins has more than 20 years’ experience Pipeline repair
in pipeline and marine engineering and is technical Pipeline integrity management
director with the Penspen Group. He has worked with
Continuing Education Units: 2.6 • Pipeline defects
most of the major oil, gas, and pipeline companies • Pressure reductions prior to repair • Risk and risk analysis
around the world providing consultancy on management, • Repair methods: grinding, weld deposition, • Integrity management methods:API 1160, ASM
business, design, maintenance, inspection, risk analysis sleeves, clamps, hot tapping, composite wraps B31.8S
• Class tutorial – risk analysis of three pipelines
Inspection using smart pigs
❖❖❖
• The history of internal inspection
• Why ‘pig’?
• Types of pig ❖❖❖
DAY 1
Pipeline engineering basics • Internally clad pipe
• New materials
• Introduction to oil and gas pipelines – their “Good experience and lots of knowledge for someone new to pipeline engineering
history Pipeline design
• Are pipelines safe? Their safety record and types
like me. All topics covered were very informative and thoroughly explained,
6 and causes of failures • Legislation and regulations regardless of time constraints. Dr. King and Prof. Hopkins did an excellent job. 7
• Basic pipeline and material parameters • Development of pipeline design codes Thanks to Clarion and GPM for this great course.”
• Detailed design: locating pipelines, design
Pipeline materials selection pressures, stresses, design factors
• Other design considerations: valves, bends, “A great course...I’m glad to have had the opportunity to attend”
• Steels used for line pipe crossings, leak detection
• Compositional limitations, mechanical
properties, grades “The instructors’ knowledge and experience are first rate.”
• Fabrication of linepipe – seamless, longitudinal
welded, ERW, spiral DAY 2
• Toughness and weldability “The course is great ... knowledgeable and experienced lecturers. What I liked most
• Improving corrosion resistance • Pipeline materials selection was the information from the presentation slides ... very useful to me.”
• Solid corrosion resistant alloy pipe • Pipeline welding
“Time well spent!! Very comprehensive
and detailed. Don’t change a thing!”
— J. Ryman, BP
“I came with very high expectations and was not disappointed. I have been
presenting adult education for 10yrs. Very professional from introduction
❖❖❖
to closing”
—D. Hennerbichler, ESSO DAY 1 Preparing the pipeline for an inspection
• Tool traps
DAY 1 DAY 2 Flaws and defects in pipelines • Pipeline cleaning
Pipeline safety and regulations Designing and implementing an in-line • Pipeline materials Overview of cleaning tools
• Brief history of pipeline failures and regulatory inspection (ILI) program • Types of pipeline Foam pigs
developments • Selecting an ILI tool • Geometric anomalies Bi-Di pigs
• Impact of recent legislation and regulations • Specific design considerations for running ILI • Metal loss Specialized tools
• Review of inspection and maintenance tools • Cracks and crack-like defects • Overview of caliper tools
compliance requirements and deadlines • Launch and receive trap design • Leaks
• What to expect in pending regulations • Bends, tees, and valves • Failure modes Performing the inspection
• Issuing an enquiry • Batching
Pigging for operation and maintenance • Schedule requirements Pipeline inspection • Tracking For dates and
• Pigging during construction • Preparation for ILI • Hydro- and stress testing • Safety locations, see
“Good speakers • Controlling operational parameters during the • In-line inspection • Launching, receiving, etc.
who know
• Pigging during operation pages 4-5.
inspection run • External inspection • Data check
their stuff.” • Strategy for contract development and
—I. King Utility pigs For fees, see
negotiations Non-destructive testing and ILI Reporting
ConocoPhillips • Cleaning pigs
• Developing a good specification • Magnetic-flux leakage tools • Data evaluation page 36.
• Sealing pigs
• Contingency planning for a stuck pig • Ultrasonics • Sample report
• Gauging pigs
• Offshore risers • Inertia or mapping tools • Feature localization
• Dual diameter pigs
8 • Magnetic cleaning pigs
• Onshore flowlines, gathering system main • Caliper tools • Assessing inspection data 9
sections or laterals • Introducing POF
• Designing a pipeline for pigging
ILI tools • MAOP
• Pig traps and pigging stations
• Free-swimming in-line inspection tools • Run comparison
• Location and tracking devices Post in-line inspection issues • Tethered and cable operated tools • Data management and archiving
• The inspection report • Overview of vendors
In-line inspection (ILI) tools - theory, • Responding to the inspection report The course also includes a workshop session
performance, and detection limits • Response prioritization and exercises covering the following
• Line pipe integrity threats • Validation of the inspection report DAY 2 topics:
• ILI tools available to the operator • Acceptance of the report
• Metal loss inspection • Re-assessment intervals - risk and probabilities Pipeline inspection procedures
• Planning an inspection • Which tool does what?
• Deformation tools • How to read tool data and defect specific.sheets
• Crack detection • The technical questionnaire
• Preparing an inspection project
• Movement and pipeline mapping ❖❖❖ • Data analysis and MAOP
“Surpassed my best expectations”
“Great Course
of Pipelines knowledgeable-
explained difficult
concepts very
well.”
For dates and
locations, see
pages 4-5.
T he course provides a broad introduction to the issue of pipeline inspection, to a level beyond
the introductory course (see page 7); it also covers aspects of external inspection as well as pipeline
protection methods. The course further includes an introduction to pipeline materials, typical failure
M any transmission pipelines are now over 30 years old. This is “middle aged” in pipeline
terms, and even the best-designed and -maintained pipeline will become defective as it progresses
through its design life. Therefore, operators need to be aware of the effect these defects will have on
modes, flaws, and defects in pipelines; the subjects of corrosion and cracks are also covered. The their pipeline, and — more importantly — be able to assess their significance in terms of the continuing
For fees, see syllabus includes an overview of in-line inspection technologies, although not covering the same integrity of the pipeline. The increasing use of high-technology maintenance (for example, intelligent
page 36. aspects discussed in the introductory course. Here, the emphasis is on such issues as verification of ILI pigs) is helping pipeline owners to assess the condition of their lines, and if these modern maintenance
data provided by vendors in the final report, and assessment of data covering integrity assessment and methods are combined with modern defect-assessment methods, they can provide a very powerful, and
fitness-for-purpose. Finally, the course discusses aspects of preparing a tender and evaluating a bid. The cost-effective, tool.
emphasis on bid evaluation is focused more on technical issues.
This course will present the latest defect-assessment methods to pipeline engineers and managers.
These methods will range from simple, quick, assessment methods, to the more-detailed —fitness for
Who should attend Lecturers purpose— analysis. The course is highly interactive and takes the form of lectures, workshops, and
case studies. The course will cover methods available to assess the significance of defects detected in
• Pipeline engineers, corrosion engineers, Dr Michael Beller is global marketing manager with NDT onshore and offshore pipelines. It will introduce simple analytical methods used to assess internal and
integrity specialists, consultants active in the Systems & Services of Stutensee, Germany. He holds a external corrosion, dents and gouges, cracks (e.g. SCC), weld defects, and fatigue. The course is unique
masters degree in mechanical engineering, and a PhD
fields of pipeline inspection and assessment, (Engineering) in fracture mechanics from the University as it is a holistic approach to defect assessment, and it ensures the student appreciates all aspects of
personnel from certification and regulatory of Karlsruhe, Germany. After a career with Preussag, the subject, including repair and risk management.
bodies involved with pipeline inspection and Pipetronix, and latterly with PII, he joined NDT Systems &
pipeline integrity. Services in July, 2001.
Who should attend Lecturers
Dr Konrad Reber studied physics at the University of Mainz,
Continuing Education Units: 1.2 with a focus on solid-state physics. His subsequent PhD Professor Phil Hopkins has more than 27 years’ experience
thesis at the material science department of the University • Pipeline engineers, designers and service in pipeline engineering, and is Technical Director with
of Erlangen involved work in the field of magnetic professionals who are involved with the Penspen Integrity and Visiting Professor of Engineering
Documentation materials, and in particular the measurement of material maintenance, inspection, and repair of at the University of Newcastle-upon-Tyne. He has worked
parameters using magnetic stray flux methods. He worked with most of the major oil and gas companies and pipeline
for Pipetronix, and then joined NDT Systems & Services,
pipelines.
• Participants will receive a full set of the course companies around the world.
where his focus is on defect assessment and general
notes and slides in ring-binder format. comparison methods of different inspection tools. Documentation Roland Palmer-Jones is a Consultant based in the Newcastle,
UK office of Penspen Integrity. He has 16 years’
• All participants will receive a detailed set of experience in the oil and gas industry. For more than
❖❖❖ lecture notes (700 pages in COLOR) plus a CD 11 years he has focused on pipeline structural integrity,
initially with British Gas Research, and since 1997 with
containing 500 pages of documents for further Andrew Palmer and Associates and Penspen Integrity.
DAY 1 reference.
“I appreciated the instructor’s ability to answer technical,
Inspection of special types of pipe Overview of in-line inspection methods metallurgical questions..it’s critical that the person teaching the
• Types of special pipe in the oil and gas industry • Metal loss Continuing Education Units: 1.6 course is able to do this, to expand on the concepts discussed
(clad pipe, flexible risers, martensitic pipe, etc.) • Cracking beyond the information presented in the slides. Phil did a great job
• Inspection challenges and solutions • Mapping of this.” For dates and
• Geometry tools • Note: This course is expanded when held
Loading conditions and pipeline materials • Leaks outside North America. See pages 4-5 for locations, see
“I thoroughly enjoyed the content and the presentation.
• Pipeline materials • Combo tools details. Hats off to Prof. Hopkins” pages 4-5.
• Loading due to pressure —A. Ellison
• Secondary stresses Verification of in-line inspection results Pipeline Integrity Coordinator
For fees, see
• How to find a defect? Centurion Pipeline L.P.
• Implications for defect formation DAY 1 page 36.
(indirect, direct flaws) • Verification methods (MP, TOFD, laser scanning)
• Correlating to the ILI report Introduction to basic pipeline engineering Introduction to fracture mechanics
Defects in the pipe wall and failure modes principles (handouts and notes only, no lecture)
• Flaws and defects in pipeline Assessment of defects based on ILI • Basic pipeline design principles • Basic theory
10 • Plastic collapse and fracture • Methods (metal loss, cracks) • Stresses in pipelines • Brittle and ductile fracture 11
• Corrosion and metal loss • Implications of ILI measurement errors • Routing of pipelines • K, J, and CTOD
• Cracks and crack-like features • Further conclusions • Basic pipeline operating and maintenance
parameters Fundamental pipeline defect failure
CP and its inspection Preparation of a tender and contract for ILI • Maintenance and inspection methods
• How to prepare a tender relationships
• CP systems
• Critical information • Why pipeline defects fail
• CP inspection methods Introduction to pipeline defects – why
• Contractual issues • Fundamental failure relationships
• Understanding the vendor pipelines fail • Explanation of key parameters
DAY 2 • How safe are pipelines?
The course will include a workshop session • How often do they fail?
External inspection methods with exercises based on the course • What causes pipelines to fail?
• Electromagnetic (SLOFEC, NoPig) material. • Pipeline risks
• Ultrasonic (guided-wave, etc.) • History of pipeline defect assessment continued overleaf
Defect Assessment in Pipelines (continued from page 11)
DAY 2 • What pigs can detect
Direct Assessment Methods for
• What operators want to detect
How to assess corrosion defects
• Setting intelligent pig inspection levels
Pipeline Integrity
• Introduction to basic theory Workshop: setting intelligent pig inspection
• Background, strengths and weaknesses levels
• Methods to assess corrosion
O
• ASME B31.G and RSTRENG methods
• DNV, BG, etc., methods
How to assess fatigue (handouts and notes N COMPLETION of the course, participants will have a solid understanding of the procedures,
only, no lecture) strengths, limitations, and applicability of various Direct Assessment technologies and methods as
• Interacting defects
• Why do pipelines fatigue?
• Universal curves for assessing corrosion defects.
• Basic fatigue theory they relate to pipeline inspection and integrity assessment for compliance with DOT regulations, and of
• Fatigue assessment – design the related industry codes and standards which will be reviewed and explained.
Workshop: corrosion assessment using • Fatigue assessment – service
fitness for purpose
Fracture propagation and arrest Who should attend Lecturer
How to assess gouges • Why fractures propagate
• Introduction to basic theory • Brittle and ductile propagation
• Methods to assess gouges • Fracture arrest • Pipeline engineers, designers and service Kurt Lawson is vice president of CC Technologies Systems,
• Additional problems and concerns with gouges • Calculating toughness requirements professionals who are involved with the Inc., a corrosion engineering and research firm
maintenance, inspection, and repair of specializing in corrosion, corrosion-control methods,
How to assess dents pipelines. research, failure analysis, and cathodic protection
• Introduction to basic theory DAY 3 monitoring, design, and construction. He has more than
• Methods to assess dents 15 years’ of field experience in the corrosion testing and
• Methods to assess dents containing gouges Pipeline repair and rehabilitation Documentation evaluation of buried structures, including reinforced
• Rock dents • Repair and rehabilitation strategy soil structures, pilings, reinforced-concrete structures,
• Problems with fatigue loadings • Response to discovering defects and cathodically-protected tanks and pipelines. Work on
• What are the cost implications? • Included with the course fee are detailed these structures has covered a wide range of techniques
• Repair methods: grinding, weld deposition, course notes in ring-binder format for including basic potential surveys, application of advanced
How to assess cracks sleeves, clamps, hot tapping, composite wraps
• Basic theory • Time to repair
reference. AC and DC electrochemical methods, advanced potential
• The problems with cracks in pipelines surveys utilizing digital-storage oscilloscopes, and complex
• Stress corrosion cracking (low and high ph) finite-element computer modelling of cathodic-protection
Risk and integrity management and analysis Continuing Education Units: 1.2 systems and their effectiveness.
• What is risk and risk analysis?
How to assess weld defects • Risk management around the world
• Welds in pipelines • Risk management in the USA
• Assessing defects in pipeline girth welds • Risk management methods – API 1160 and
• Assessing non planar defects in welds ASME B31.8
• The EPRG girth weld defect guidelines • Baseline and direct assessment – discussion item
• Fatigue design of girth welds • Integrity management programs ❖❖❖
• Prioritization schemes
Setting intelligent pig inspection levels
• Pigs — where they came from and what they can Workshop: setting priorities DAY 1 • Guidelines for determining the required number
do of direct examinations
• Basic theory
• Magnetic, ultrasonic pigs – their accuracy and General Post assessment
limitations. ❖❖❖ • Regulatory issues • Remaining life calculations
• NACE Standard • Reassessment intervals
• INGAA • Assessment of ECDA effectiveness
• ASME B31.8S • Feedback and improvements
• Records
External corrosion direct assessment (ECDA)
• NACE Standard RP0502-2002 For dates and
Indirect inspection methods locations, see
• Pre-assessment • Close interval surveys CIS
• Data collection • AC attenuation pages 4-5.
• ECDA feasibility for pipelines • DCVG and ACVG Surveys
• Indirect inspection tool selection • Pearson surveys For fees, see
The 2008 European Conference on • ECDA region identification
• Indirect examination
• Cell to cell surveys page 36.
• Selection of indirect selection tools
12 Evaluation and Rehabilitation of Pipelines • Data alignment and comparison
• Indication classification
Example of ECDA application
13
DAY 2
Prague • 20-24 October, 2008 Direct examination
• Prioritization Internal corrosion direct assessment (ICDA)
• Excavations and data collection • NACE standard prepared by TG 293
• Coating damage and corrosion depth • Pre-assessment
Details at www.piperehabconf.com measurements • Data collection
• Measurements • ICDA Feasibility for pipelines
• Remaining strength evaluation • ECDA Region identification
• Root cause analysis • Indirect examination
• Mitigation
• In-process evaluation continued at the foot of p14
• Reclassification and reprioritization
Pipeline Mapping, GIS, Pipeline Mapping, GIS, and Data Integration
(continued from page 14)
and Data Integration
Day 1 • Geocoding
For dates and
locations, see
pages 4-5.
D ESIGNED FOR pipeline company personnel in need of either a refresher or an introduction to
data management for pipeline-integrity and risk-analysis support, this course reviews data model
types, where to locate data, how to integrate data from different sources, and how to best make this data
• Background
•
•
Spatial analysis (geoprocessing)
Topology
• Why take a data management approach? • Establishing the data framework
work.
For fees, see • Why focus on mapping and GIS? • Core data - the framework
page 36. On completion of this course attendees will have: an understanding of the ways that data can be stored, • Project planning • Asset data
including a review of industry standard data models; will be able to identify possible data sources; and • Getting organized • Off-pipe spatial data
will have learned methods for review and acquisition of data. In addition, attendees will have powerful • Managing data • Links to external systems
insight into getting the most out of the vast amounts of data available to make better-informed decisions • Data storage • Integrating new data
regarding risk and integrity management. • Introduction to pipeline data models • Asset data
• Thinking spatially • Using GPS
Who should attend Continuing Education Units: 1.2 • What is a GIS? (and why do I need one?) • Field surveys
• Spatial data overview • Case study: ILI, GIS integration
• Pipeline-integrity managers, pipeline • Upon completion of the course, participants
• Fundamentals: coordinates and projections • Supercharged data - running analyses
engineers involved in assessment activities will be eligible to receive 1.2 Continuing
Education Units (CEUs). • Pipeline data in GIS • Applications to analyze data
including risk assessment, and anyone
requiring a general knowledge of pipeline data • Why GIS and not CAD? • Case Study: liquids HCA analysis
management. Lecturer • GIS vendor options • Accessing and sharing
• How should I use GIS? • Collaboration and feedback
Course notes Nick Park has 10 years of software product management • Pipeline mapping • Delivering data and analyses
experience, with more than five years specifically in the
pipeline industry. He is currently a consultant and was
• Data model templates (again) • Reports
• All delegates will receive a detailed set of previously vice president of technology for GeoFields • Making maps
lecture notes providing an invaluable reference Inc, and has an MS in geographic information systems.
• Future concepts
document. Nick has been involved in the design and implementation Day 2
of data-management systems for complex pipeline
operations, which are currently being used by thousands • GIS Boot Camp ❖❖❖
of individuals across a diverse client base.
• Centerline editing
• Posting station
continued at the top of p15 locations
• GAs and liquid operators, pipeline security of pipelines and other systems.
professionals that are involved with Internationally known as a specialist in these ❖❖❖
maintenance, inspection, and repair, fields, he is a Charter member of IASSAR
governmental regulators, decision-makers, (International Association on Structural Safety
human-resource managers, risk managers, and Reliability), USA; a member of ASME and
specialists in new technologies for pipeline of its Pipeline Systems Division Technical
integrity and safety, among others. Committees (operation and maintenance,
18 risk and reliability); a member of the API 19
Continuing Education Units: 2.6 1163 ILI Qualification Standard Work Group;
and a member of the Interstate (CIS) Science
& Engineering Council on High Reliability
Transmission Pipelines.
“The course was very informative in that it provided a wide variety of “The course was enjoyable and very thorough. I was initially
perspectives on Risk analysis and a comparison of the pros and cons concerned that there would be little applicability of the information
of each.” for me (offshore focus) but I was quite wrong.”
—J. Roberts —J. E.Hults, E.I.T.
GeoFields Senior Specialist, Risk & Integrity Management, Technip
ILI Data Analysis for Pipeline ILI Data Analysis for Pipeline Integrity Management
Integrity Management (continued from page 20)
Statistical predictive methods for dealing with uncertainty in ILI data DAY 1 corroboration of the ILI data
• Contractual criteria for defect reports
For dates and Introduction • ILI quality management
I N-LINE inspection (ILI) technology has been in existence for approximately 40 years and has • Cost/benefit analysis of ILI technology
locations, see
become the preferred method used by pipeline operators to ensure the integrity of their pipeline • Problems discovered during integrity
pages 4-5.
assets. However, as demonstrated world-wide by recent accidents on hazardous liquid and natural
management program (IMP) inspections and DAY 4
pipeline accident investigations
For fees, see gas pipeline systems, some pipelines, that were inspected by ILI devices and found safe for further Workshop # 1: Working examples of total
page 36. operation, continue to fail soon after (6-12 months) the inspection. Critical knowledge gaps in current ILI analysis of ILI data
technology
A telling quote from the US Department of Transportation: • Implementation of ILI analysis output in risk-
• Holistic analysis of ILI data – key element based pipeline IMPs
in successful pipeline integrity management
“The Pipeline and Hazardous Materials Safety Administration’s Office of Pipeline Safety (OPS) program Manual for the IMP manager: from holistic
has growing concerns with how operators are applying, interpreting, and evaluating data acquired • ILI data analysis terminology ILI data to IMP activities
• Defects: main threats and localities of pipeline
from in-line inspection devices, and how operators should be effectively integrating this data with loss of integrity • Assessment of rupture pressure (B31mod, Shell,
other information about the operator’s pipeline. OPS has become concerned with performance Battelle, DNV, etc.)
issues associated with in-line inspection devices and how the data acquired from these devices is Types and classification of pipeline defects • Defect-growth models
being used to characterize, discriminate, interpret, and evaluate… pipeline defects. • Corrosion
• Pipeline defects and remaining life • Stress corrosion
• Structural reliability and performance risk of • Low-cycle fatigue cracks
…OPS needs to determine if the problem resides in the technology or in the secondary and pipelines with defects • Interaction rules
tertiary stages of the ILI data evaluation – data characterization, validation, and mitigation, …and • Basics of ILI technology • Fitness-for-purpose assessment
to understand how the government, pipeline operators, standards organizations, and ILI vendors • Remaining lifetime
can help improve pipeline assessment using ILI technology.” DAY 2 • Planning the next ILI
ILI – most important single method of Real case studies: application of PRIMA
This pioneer training course, organized in association with the Science and Engineering Center’s pipeline diagnostics software
Reliability and Safety of Large Systems Division, Ural Branch, Russian Academy of Sciences,
• Contemporary methods of ILI Workshop # 2: Risk-based prioritization
Ekaterinburg, is aimed at answering the above questions. The course presents practical methods of of pipeline segments with defects for
• Four stages of ILI technology
risk-based ILI technology as applied to solution of pipeline integrity problems. The course is highly • Three possible outcomes of ILI maintenance/repair: making clever
interactive, and takes the forms of lectures, workshops, case studies, and discussions. • International ILI qualification standards: an decisions on actionable anomalies
overview
Role of the human factor in ILI technology
Comprehensive digest and analysis of
Objectives Who should attend existing international standards: DAY 5
• API 1163, NACE Standard RP 0102-2002, NACE Influence of ILI-induced human errors on
• The course is designed for professionals who • Gas and liquid operators, pipeline 35100, ASNT ILI- PQ 2005 pipeline safety and reliability
need to know the basics of acquiring and professionals that are involved with the ILI, • Selection of an ILI system (API 1163, RP 0102-
2002, RP 35100) • Personnel education, qualification, certification,
interpreting ILI data when assessing pipeline direct assessment, maintenance and repair, • Operational characteristics & constraints (API training and experience requirements (as per
integrity and safety. Participants will get governmental regulators, decision-makers, IMP 1163, NACE) ASNT ILI PQ requirements)
a working knowledge of the basics of the managers, human-resource managers, risk
engineering approach to ILI data extraction, managers, specialists in pipeline integrity and DAY 3 Existing approaches to quantitative
mining, fusion, and analysis. They will also get safety, among others. assessment of human factor/errors
essentials of the current international codes ILI system performance specification (API
1163) • Repeatability and reproducability of ILI and
that regulate ILI systems quality (API 1163, Lecturer • Basics of holistic ILI data acquisition, mining, field-verification measurements
NACE Standard RP 0102-2002, NACE 35100, analysis, and management • Interaction of pipeline operators, ILI vendors,
ASNT ILI-PQ 2005), and how to use them on a Professor Sviatoslav (Slava) Timashev is an acknowledged • ILI as a measurement system and regulatory bodies
international expert on oil and gas pipeline safety, and has • Main sources of variability in ILI measurements
20 daily basis.
over 25 years of experience in pipeline reliability, remnant • Typical ILI results Understanding ILI tool data submitted by 21
• Seven basic ILI performance quality metrics vendors
life, diagnostics, maintenance, safety, and security,
The course is unique, as it is offered to oil and working (among other clients) for the Russian oil and gas • Probability of true detection (PTD)
gas specialists for the first time, and is rich in • Probability of true location/positioning • Information exchange flow between operator
majors Gazprom and Transneft. He is currently director of
• Probability of true identification/discrimination and vendor before, during, and after ILI
content. It presents comprehensive analysis the Science and Engineering Centre at the Ural Branch of
(PTI) • Regulators and ILI quality
the Russian Academy of Sciences at Ekaterinburg.
of ILI data with respect to pipeline integrity • Defect sizing accuracy metrics • ILI tender issues
and safety assurance, providing for operational For his detailed profile, please see p16. • ILI system measurement and verification models
• Flow chart of holistic analysis of ILI results Conclusion: next steps and new horizons
excellence of pipelines and ILI technology.
• Solving the problem of missing and false ILI data
The course is self-contained. There is no need • Calibration of ILI tools and results of runs
to look for additional material to understand Continuing Education Units: 2.6
• Field verification of ILI data
the course. • Number of confirmatory digs needed for ❖❖❖
“The course was very informative. It was
a great learning experience and look
forward to future courses with Clarion.”
A
“ I was very lthough stress-corrosion cracking (SCC) is responsible for a very small percentage of pipeline Metallurgical factors • Hydrostatic testing
impressed with • Pipe grade • In-line inspection
failures each year, it continues to be a safety concern to pipeline operators, and it must be treated • Direct assessment
the depth and • Steel composition
quality of the in integrity management plans. This course will provide a detailed description of what is known • Mechanical properties
information about its appearance and causes, and it will discuss various approaches to mitigating and managing • Microstructure Mitigating SCC
presented. The the problem. Practical information on recognizing and dealing with SCC will be presented, along with • Manufacturer • Operating existing pipelines
presentation was descriptions of research results that have led to our current understanding of causes and methods of • Designing new pipelines
top notch. “ Mechanisms of SCC • Repair methods
—B.C. Mittelstadt management. • High-pH SCC
Senior Engineer • Near-neutral-pH SCC Integrity management plans
El Paso • Regulations
Pipeline Services Likely locations for SCC • Approaches
Who should attend of SCC, from which he identified the major factors that
• Geographical
cause high-pH SCC in pipelines. He also managed the
laboratory portion of that program from 1965 to 1982, • Proximity to compressor or pump stations SCC Direct Assessment technology
• Pipeline engineers, designers, and service which added significantly to an understanding of the • Proximity to other SCC demonstration
• Soil, terrain, moisture level
professionals who are involved with the phenomenon, and explored a number of possible solutions
• Gas versus liquid pipelines
maintenance, inspection, and repair of to the problem. For the past several years, he has been the
SCC consultant for GRI and PRCI. He recently completed
• Coating types and conditions
pipelines a comprehensive gap analysis on SCC, and he actively
• Pressure history
• Researchers who want to be aware of the participated in drafting the NACE Recommended Practice on
• Corrosion history ❖❖❖
• Pipe manufacturer
current understanding of SCC in pipelines SCC Direct Assessment.
Who should attend Course Program Who should attend of the odorization audit and expertise in regulatory
compliance, and evaluating damage-prevention programs.
His experience includes risk assessments for over 75 gas
• The course is especially designed for pipeline • Introduction • This course is designed for pipeline company utilities for AEGIS Insurance Services, membership on the
integrity engineers and inspection specialists, personnel in regulatory compliance, Damage Prevention Quality Action Team (Dig Safely), and
• Corrosion rates
ILI data analysts, and technical personnel operational, or engineering roles. as a staff member at the Transportation Safety Institute,
responsible for pipeline integrity assurance • Introduction to Inspection timing Pipeline Division. David has over 28 years’ experience
helping pipeline operators to assess and manage their
and corrosion control. • Deterministic approach Documentation risk and liability exposures. He is also a principal in
• Reliability approach ViaData LP, publisher of WinD.O.T., The Pipeline Safety
Documentation • Risk approach • Participants will receive a detailed set of Encyclopedia.
course notes for reference after the course. George Williamson is currently the manager of DOT
• All delegates will receive a detailed set of • Assessing ILI uncertainty
Regulatory Compliance and Process Safety Management
lecture notes providing an invaluable reference • Methods of assessing corrosion rates Continuing Education Units: 1.2 for BP America’s Onshore Business Unit. He oversees
document. the compliance program for approximately 12,000 miles
• Assessment of failure pressure
of buried piping. George has over 20 years’ of O&M and
• Miscellaneous topics integrity management experience. He is a registered
Continuing Education Units 0.6 • OPIS software tutorial Lecturers
professional engineer, as well as being a NACE-certified
corrosion and cathodic protection specialist.
• Regulatory requirements for pipeline integrity • Compliance options for company personnel and
management will be covered in detail. Technical contractors
and practical application aspects of the following
baseline assessment methodologies will be
reviewed: • Commercially available industry-wide
qualification alternatives
In-line inspection
Pressure testing • Interpretation and enforcement issues OQ2
Direct assessment
“This was an excellent overview course with a good
blend of technical and practical knowledge.”
Dr Ruxin Song has more than 15 years’ experience inrisers Dr Paul N. Stanton is vice president of the riser technology
and pipelines. He has been the lead engineer for some and well systems department of Technip Offshore, Inc. He
large well-known riser and pipeline projects in North has 36 years of experience in deepwater floating drilling
Sea , Gulf of Mexico, and offshore Brazil, including the research and engineering, subsea production research,
EMDC Kizomba Tower riser, Statoil’s Gullfaks pipeline and TLP and Spar well systems’ research and development,
riser bundles, BP’s Thunder Horse risers, and Petrobras’ and riser engineering management. Paul is active in
Roncador risers. Ruxin has published 30 technical papers in development of API and ISO standards for dynamic riser
international journals and conferences, and been actively systems.
involved in design code development. Currently Ruxin is
a principal associate in the riser technology department of Glenn Wald is a senior staff mechanical engineer with
Technip Offshore, Inc., Houston. Shell Oil. He has 25 years experience in the industry.
His primary area of expertise is design, procurement
and installation of Spar and TLP riser systems. This
includes concept evaluation, system design, component
design, interface management, and riser component
manufacturing.
❖❖❖
❖❖❖
14 - 24 September, 2009
Rio de Janeiro
details will be posted on:
www.clarion.org and www.pipeconferences.com
Course Fees Index of courses by topic
(Note: courses are arranged alphabetically in each category,
and numbers refer to page numbers in this catalogue)
The fees listed here are for budget estimates only. They are subject to change and will vary with locations.
Please visit www.clarion.org or call us on (+1) 713 521 5929 to confirm the latest rates.
Contact details
Clarion Technical Conferences Global Pipeline Monthly
❖❖❖
Suite 255, 3401 Louisiana PO Box 21
Houston, TX 77002, USA Beaconsfield HP9 1NS, UK
t: 713 521 5929 t: +44 (0)1494 675139
e: bjlowe@clarion.org e: jtiratsoo@pipemag.com
Index of courses by title
SUBSEA PIPELINE PIPELINE OPERATION SUBSEA PIPELINES PIPELINE RULES OF PIPELINE RULES OF
ENGINEERING, 2ND ED & MAINTENANCE & RISERS, 2ND EDITION THUMB HANDBOOK THUMB SOFTWARE
Andrew C. Palmer and M. Mohitpour, J. Szabo, Yong Bai 6TH EDITION W. Kent Muhlbauer
Roger A. King T. Van Hardeveld Summarizes the author’s E.W. McAllister Over 200 equations
Authored by two of the Addresses day-to-day 18 years research and Standard resource for built in for quick
world's most respected operations and maintenance engineering experience at any professional in the calculations. All of the
authorities in subsea of pipelines, valves and universities, design pipeline industry by articles (more than
pipeline engineering, this operators, hydrocarbon offices and classification providing quick 400) in the text edition
definitive reference book measurement, pump and societies and is suitable solutions to the available on CD with
covers the entire compressor stations, system as a textbook for graduate everyday pipeline keyword search
spectrum of subjects in automation, and reliability/ students and a reference problems that the capabilities.
the discipline. availability assessment. for practicing engineers. pipeline engineer faces.
OIL & GAS PIPELINES PRACTICAL MANUAL ON PEABODY'S CONTROL NACE CORROSION
IN NONTECHNICAL MICROBIOLOGICALLY OF PIPELINE ENGINEERS
LANGUAGE INFLUENCED CORROSION REFERENCE BOOK
Leffler Miesner CORROSION Edited by Ronald Bianchetti Edited by R. Baboian JOURNAL OF
Written for those not John G. Stoecker II, Editor Completely revised and Expanded and updated to PIPELINE ENGINEERING
directly involved in A perfect companion to updated to provide the include 136 new and 47 An independent, refereed,
pipeline operations — the first edition, Volume most thorough and revised items. New international quarterly
legal, supply, accounting, 2 uses the same format authoritative coverage of Sections have been added journal devoted to the
finance, and people who while providing new the prevention and to help in the evaluation subject of maintaining and
service and sell material and current control of pipeline of corrosion tests and improving pipeline
equipment to pipeline developments with an corrosion. data. integrity for oil, gas, and
companies. international influence. products pipelines.