Вы находитесь на странице: 1из 2

P.A.

College of Engineering, Mangalore


DEPARTMENT OF MECH Engg

Internal Assessment -Test 3


ACADEMIC YEAR 2014-15
Class: IIIrd Sem M2 Duration: 60
Minutes
Subject: Fluid Mechanics Max Marks: 25
Subject Code: 10ME36B Date: /11/2015

Note:
Answer any two full questions Draw neat diagrams wherever necessary.

1. a) Derive Darcy relation for turbulent flow through pipes [9.0Marks]


Find head lost due to friction in a pipe of diameter 300mm,length [3.5Marks]
b) 50m,through which water is flowing with a velocity of 3m/s using
Darcy formula

2. a) Derive Hagen-Poiseuille equation for flow through pipes [9.0Marks]


A crude oil of viscosity 0.97 poise and density 900kg/m3 is flowing [3.5Marks]
through a horizontal pipe of diameter 100mm & length 10m.Find
b)
pressure difference at the two ends of the pipe, if 100kg of oil is
collected in a tank in 30 seconds.

3. A horizontal pipe 40m long is connected to a water tank at one [6.5Marks]


end and discharges freely at the other end. For the first 25m of its
length from the tank ,the pipe is 150mm diameter and its diameter
a) is suddenly enlarged to 300mm.The height of water level in the
tank is 8m above the centre of pipe. Draw total energy line (TGL)
& hydraulic gradient line (HGL) for the flow arrangement. Assume
f=0.01
An oil of viscosity 10 poise flows between two parallel plates [ 06Marks]
which are kept at a distance of 50mm apart. Find the rate of flow
b)
of oil between the plates if drop of pressure for a length of 1.2 m is
0.3N/m2.The width of the plate is 200mm.

****************************************************************************

BEST OF LUCK
P.A. College of Engineering, Mangalore
DEPARTMENT OF MECH Engg

Internal Assessment -Test 1


ACADEMIC YEAR 2016-17
Class: Vth Sem M1 Duration: 60Min
Subject: Energy Engineering Max Marks: 25
Subject Code: 10ME53 Date: 02/09/2016

Note:
Answer any two full questions.
Draw neat diagrams wherever necessary.

1. a) Explain overfeed & underfeed stoker [6 Marks]


b) Explain Pneumatic ash handling system [6.5Marks]

2. a) With a neat sketch explain Velox boiler [ 08Marks]


b) What are super heaters & Reheater? [4.5Marks]

3. a) Explain hydraulic ash handling system [6.0Marks]


b) With a neat sketch explain Benson boiler [6.5Marks]

****************************************************************************

BEST OF LUCK

Вам также может понравиться