Академический Документы
Профессиональный Документы
Культура Документы
OBJECTIVES:
To provide better understanding of power system analysis through digital simulation
LIST OF EXPERIMENTS:
1. Computation of Parameters and Modelling of Transmission Lines
2. Formation of Bus Admittance and Impedance Matrices and Solution of Networks.
3. Load Flow Analysis - I : Solution of load flow and related problems using Gauss-Seidel Method
4. Load Flow Analysis - II: Solution of load flow and related problems using Newton Raphson Method.
5. Fault Analysis
6. Transient and Small Signal Stability Analysis: Single-Machine Infinite Bus System
7. Transient Stability Analysis of Multi machine Power Systems
8. Electromagnetic Transients in Power Systems
9. Load Frequency Dynamics of Single- Area and Two-Area Power Systems
10. Economic Dispatch in Power Systems.
TOTAL : 45 PERIODS
OUTCOMES:
Ability to understand and analyze power system operation, stability, control and protection.
EE6711 POWER SYSTEM SIMULATION LABORATORY
INDEX
CYCLE I
1. Computation of Parameters and Modelling of Transmission Lines
2. Formation of Bus Admittance and Impedance Matrices and
Solution of Networks.
3. Load Flow Analysis - I : Solution of load flow and related problems
using Gauss-Seidel Method.
4. Load Flow Analysis - II: Solution of load flow and related problems
using Newton Raphson Method.
5. Fault Analysis
CYCLE II
6. Transient and Small Signal Stability Analysis: Single-Machine
Infinite Bus System
7. Transient Stability Analysis of Multi machine Power Systems
8. Electromagnetic Transients in Power Systems
9. Load Frequency Dynamics of Single- Area and Two-Area Power
Systems
10. Economic Dispatch in Power Systems
COURSE OBJECTIVES:
1 To model transmission lines
2 To formulate Bus Admittance and Bus Impedance matrix
3 To analyse faults in Power systems using MATLAB
4 To analyse transient stability of Multi machine Power systems
COURSE OUTCOMES:
SNO DESCRIPTION PO(1..12) PSO(1,2)
MAPPING MAPPING
At the end of the course the students can able to
C407.1 Compute the parameters of transmission lines PO1, PO2, PO3, PO4, PSO1,
PO5, PO6, PO7, PO9, PSO2
PO10, PO12
C407.2 Solve load flow problems PO1, PO2, PO3, PO4, PSO1,
PO5, PO6, PO7, PO9, PSO2
PO10, PO12
C407.3 Apply steady state stability analysis of single, two and multi machine system PO1, PO2, PO3, PO4, PSO1,
PO5, PO6, PO7, PO10, PSO2
PO12
C407.4 Solve transient stability problem PO1, PO2, PO3, PO4, PSO1,
PO5, PO6, PO7, PO12 PSO2
C407.5 Model LFC , AGC and AVR for single and two area power systems PO1, PO2, PO3, PO4, PSO1,
PO5, PO6, PO7, PO8, PSO2
PO9, PO11, PO12
COURSE OVERALL PO/PSO MAPPING: PO1, PO2, PO3, PO4, PO5, PO6, PO7, PO8, PO9, PO10, PO11, PO12/ PSO1, PSO2