Академический Документы
Профессиональный Документы
Культура Документы
Lubricant Solutions
Filters Filter Heads Manifolds Kits Fuel Carts hP Filters and Heads DEF TRAP Accessories
DIESEL IS
As diesel travels from refinery
DIRTY.
to terminal locations to local bulk
storage and finally to your bulk
tank, it picks up contamination that
is deadly to todays engines.
BAD.
delivers diesel that meets or
exceeds fuel-industry standards
for cleanliness. This is not clean
enough for your equipment.
MORE.
ever touches your equipment,
youll eliminate costly downtime,
Keep Running and Achieve More.
SIZES OF FAMILIAR
PARTICLES IN MICRONS
100 m Grain of Table Salt
80 m Human Hair
40 m Lower Limit of Visibility
25 m White Blood Cell
10 m Talcum Powder
8 m Red Blood Cell
2 m Bacteria
<.5 m Silt
Donaldson Delivers
Water Protection Choosing the
Are your bulk fluids passing large amounts of free water
Ideal Filters for
downstream contaminating vehicles and equipment? Your System
Donaldsons water absorbing filter with super Doesnt Need to be
absorbent polymer media, DBB0248, will Complicated
stop flow if large amounts of free water are
detected in your ethanol-free fluids. Designing
systems with water absorbing filters requires
1 Select the right filter to achieve
targeted ISO cleanliness. Proper
careful sizing considerations. A Donaldson design of the system will help avoid
specialist will assist in configuring a system unnecessary costs.
that meets your specific needs for flow and
pressure drop. 2 Determine the working pressure
of the system and select the filter
line compatible with that pressure.
Donaldson Delivers
Clean. Protect.
Donaldson single-pass filtration on the inlet removes Water absorbing filters, T.R.A.P. Breathers and Reservoir
contamination before it can enter your storage tank Air Dryers reduce the risk of moisture and contaminants
and contaminate it. entering a bulk storage tank so fluids are kept clean and
dry. Used together, theyll help guard fluids from free
Compact and easy to replace, Donaldson filters are an
water, airborne contamination and microbial growth for
important line of defense in maintaining fluid quality and
as long as they stay in storage.
can be configured for high flow rates while minimizing
pressure drop.
P R OT E C
CLEAN T
POLISH
Polish.
Unstable fluids and the tank itself can be a source of
contamination. Final filtration on the outlet with Donaldson
filters ensures that targeted ISO cleanliness levels are
achieved before fluids are pumped into your system.
Achieve More.
These kits are easy to install on any fuel dispenser and come with
everything needed to filter out even the finest contaminants before
they can enter your equipments fuel system. With the included
easy-to-follow, step-by-step instructions, youll have effective,
efficient filtration in minutes.
COMPACT HIGH-CAPACITY
X011745 X011450
Parallel Filtration Parallel Filtration
For flow rates up to For flow rates up to
32 GPM / 121 LPM 125 GPM / 473 LPM
The Compact Clean Diesel The High Capacity Clean
Kit is designed for use on Diesel Kit includes a dual
mobile service trucks, slip head with two identical
tanks, D-tanks, inside fuel filters plumbed in parallel to
dispensers and other tight accommodate higher flow
locations. rates and usage volumes.
AC 12-Volt DC 24 -Volt DC
Clean Fuel Cart Clean Fuel Cart Clean Fuel Cart
Replacement Filter Elements DBB8666 Fuel Filter & DBB0248 Water Absorbing Filter
Pump Model Piusi Panther 56 Piusi Panther DC 12V Piusi Panther DC 24/12V
Working Pressure 23 psi / 160 kPa / 1.6 bar 22 psi / 150 kPa / 1.5 bar
FEATURES APPLICATIONS
Highly efficient, state-of-the-art filter media and design Single pass filtration for clean fluid transfers
Unsurpassed filter efficiency High efficiency kidney looping
Cleans to target ISO cleanliness in a single pass Inlet and outlet filtration at bulk storage tanks
Modular design can be configured for Dispenser polishing filtration on fuel pumps
virtually any flow rate or usage level and hose reels
Fast and easy to service Mobile and stationary applications
D.E.R.T.
Donaldson Electrostatic Reduction Technology
Electrostatic discharge can be created when diesel fuel or light oils pass
through filter media at high flow rates.
The fluid being filtered may have inadequate conductivity to dissipate the
charge generated by high flow filtration applications. The electrical charge
can build-up in the fluid until it discharges or sparks across the filter,
burning holes in the filter media and letting through harmful contaminants.
Donaldsons proprietary Electrostatic Reduction Technology neutralizes
Filter media damage from electrical charge and prevents damage to the filter media. This enables
Electrostatic Discharge (ESD). efficient single pass fuel filtration in high flow applications.
Transmission
Fluid Engine and Ethanol-free
All diesel fuels and
Compatibility gear oil fluids
hydraulic oil
Recommended
< 100 cSt < 500 cSt < 6000 cSt <1500 cSt
Viscosity Range
Working
350 psi / 2413 kPa / 24.1 bar
Pressure
Element Collapse
150 psi / 1034 kPa / 10.3 bar
Pressure
Rated Static
800 psi / 5516 kPa / 55.2 bar
Burst
Max. Flow
32 gpm / 121 lpm 65 gpm / 246 lpm
Range**
D.E.R.T.*** Yes No
-40 to
Operating
-40 to 245 F / -40 to 118 C 190 F / -40 to 245 F / -40 to 118 C
Temperature
-40 to 88 C
*
Select the proper filter by fluid type and OE recommended ISO code. Do not over-filter fluids. Doing so may result in the stripping of beneficial additive.
**
Actual flow rate varies based on fluid viscosity, pumping pressure and filter loading.
***
DERT Donaldson Electrostatic Reduction Technology prevents media damage during high flow fuel applications.
Filter Heads
Clean Solutions filter heads feature robust, aluminum construction
with steel inserts to minimize metal-to-metal galling between
the head and the filter, even when used with diesel fuel.
FEATURES APPLICATIONS
Steel inserts are safe to use with diesel fuel For use with Clean Solutions filters
Threads contain an O-ring to completely seal Compatible with all diesel fuels and lubricants
the clean side from the dirty side of the filter
Heads are pre-ported for optional pressure
gauges and service indicators
Filter Quantity* 1 1 2
125 gpm /
Max. Flow Range** 65 gpm / 246 lpm
473 lpm
39.1
[1.54] 0 0.0
73.2 0 20 40 60 80 100 120
[2.88]
Flow Rate (GPM)
19.1 [0.75]
SAE-20 O-RING
& 1 NPTF
P568583
0.6
300.7
[11.84]
127.8 203.2
[5.03] [8.00] 0.4
DIRECTION 0.2
0 0.0
0 20 40 60 80 100 120
3/8 -16 UNC
4-PLACES Flow Rate (GPM)
INDICATOR
PORT 57.7
[2.27]
50.8
[2.00] Single Filter Head Pressure Drop
91.4
[3.60]
Flow Rate (LPM)
0 100 200 300 400
12
0.8
1 1/2 19.05 [.75]
SAE 4-BOLT
CODE 61 FLANGE
0.6
Pressure Drop (BAR)
8
Pressure Drop (PSI)
0.4
Dual Head With
Parallel Flow Path 4
Manifolds
Clean Solutions Filter Manifolds expand capacity or increase flow
rate beyond the capability of a single or dual filter head. Two or
more manifolds can be plumbed together to accommodate even
larger flow rates.
Filter Quantity** 4 8 10 Up to 12
2" ANSI
Mounting Connection 4" ANSI 150 Flange
150 Flange
Accessories
Pressure Gauges 2 pcs 0-160 psi / 0-11 bar gauges included
Sold Separately
No external
Construction Painted carbon steel pipe with aluminum heads
aluminum
FEATURES APPLICATIONS
Fast, easy and safe to service Bulk fuel and lubricant filtration and water removal
Requires no electrical or air hook-ups High flow transfer into or out of tanks and dispensing equipment
Large capacity in small footprint Hard-to-filter high viscosity oils
Flexible mounting options (horizontal or vertical) Inline industrial filtration of gear oils and lubricants
Cost effective high capacity system Kidney loop applications
4 Filter Manifold
P561880 Manifold Pressure Drop
Flow Rate (LPM)
569.5 0 500 1000 1500 2000 2500
[22.42]
20
P561880
DOWNSTREAM 1.2
M16 X 2
DOWNSTREAM MINI MESS 16
M16 X 2 TEST PORT
MINI MESS 1
0.6
DIRECTION
8
OF FLOW
0.4
0 0
2 ANSI 150 2 ANSI 150 0 100 200 300 400 500 600 700
FLANGE FLANGE
Flow Rate (GPM)
accessories
ELECTRIC INDICATOR
PORT ANSI 150 FLANGE
2X M16X2 4" BORE
MINI MESS
TEST PORT
5.91
150
784.4
[30.88]
944.5 164.7 416.8 165.3 486.5 435.7
[37.18] 6.48 16.41 6.51 19.15 17.15
DIRECTION
OF FLOW
DIRECTION
OF FLOW
UPSTREAM DOWNSTREAM
M16 X 2 M16 X 2
MINI MESS MINI MESS
TEST PORT TEST PORT
UPSTREAM DOWNSTREAM
M16 X 2 M16 X 2
MINI MESS MINI MESS
TEST PORT TEST PORT
Service shops use high pressure pumps to force oil through long
lengths of piping and hose reels prior to dispensing into equipment.
Donaldson Bulk hP filters remove contaminants delivered in oil and
picked up in storage or delivery lines during final transfer. They
ensure the required ISO cleanliness level is met every time.
hP Single hP Head
Head with Bypass
Indicator Yes
Yes - 50 psi /
Bypass Valve No
345 kPa / 3.4 bar
Element Collapse
300 psi / 2068 kPa / 20.7 bar
Pressure
FEATURES APPLICATIONS
Up to 1000 psi / 6894 kPa / 68.9 bar working pressure Lube shops
Extended life filters with high dirt holding capacity Mobile service trucks
Easy disposal with recyclable can and incinerable element Other higher pressure single pass applications
Compact design requires only 1.5" / 38 mm
clearance for servicing
35.1
[1.38]
66.5
[2.62] 0 0
109.5 0 10 20 30 40 50
[4.31]
19.0
Flow Rate (GPM)
SAE-16
[.75] O-RING
Bulk hP Filters
P565184 | P565185 | P565183
94.1
[3.70]
250.8
[9.88]
CLEARANCE FOR
38.1 FILTER CHANGEOUT
[1.50]
The Donaldson DEF filter catches contaminants before they reach your
vehicle or equipment and the onboard DEF filter. Clean DEF ensures proper
function of the SCR and extends the life of the onboard DEF filter.
SCR
DEF
NOx Reduc
tion
DPF Pre-Filter
DEF Filter
0.1
0 0
0 2 4 6 8 10
Flow Rate (GPM)
2X 1/4 NPT
GAUGE PORT
18.2
63.5 [.72]
[2.50] 347.7
[13.69]
CLEARANCE FOR
20.1 FILTER CHANGEOUT
[.79] 25.4
[1.00]
2X 1 NPT
OR BSP
104.8
[4.13]
DEF IS HIGHLY CORROSIVE. All pipe fittings must be compatible with DEF.
Most plastics as well as stainless steel are acceptable. Carbon steel, zinc,
aluminum, brass, copper, etc. are not recommended due to undesirable
chemical reactions. If any of these materials are used in your system they
should be immediately replaced with a compatible material.
T.R.A.P. Breather
The Thermally Reactive Advanced Protection (T.R.A.P.) Breather
assembly protects the fluids in your storage tank from airborne
particulate moisture contamination and ambient moisture.
Keep your fluids clean and dry with a Donaldson T.R.A.P. Breather.
T.R.A.P.
Breather
Opens at 10 mbar /
Overflow Check Valve
4" H2O
-40 to 200 F /
Operating Temperature
- 40 to 93 C
ABS housing,
Construction
Urethane end caps
FEATURES
T.R.A.P. Breather Restriction
High efficiency air filtration Flow Rate (LPM)
Longer life and lower airflow restriction than typical 0 200 400 600 800 1000 1200 1400
8
silica gel breathers
Self-regenerating moisture adsorption 1.6
6
Easy to service
0.8
APPLICATIONS 2
T.R.A.P. Breather
X920006
176.5
[6.95]
D
MOIST AIR
RY
A IR
DR Y AIR
MOIST AIR
T.R.A.P TM
SEPERATES HERE
FOR SERVICING
When combined with a T.R.A.P. Breather, the complete system keeps moisture and
contamination out, even if fluid flow rate out of the tank surpasses the Reservoir Air
Dryer flow rate into the tank.
Inlet Air required @ 100 psi 0.8 scfm (22.7 slpm) maximum
The Reservoir Air Dryer is not recommended for use on gasoline holding tanks or for the head space of any flammable liquid (Flash Point of 100F/38C)
*
FEATURES
The clean, dry air sweep dehydrates the reservoir head space and removes
dissolved moisture from exposed oils and fuels*
Operates with standard plant air; instrument quality air is not required.
Sub-micron coalescing air filter collects oil and water droplets and fine
particles from inlet air
Automatic drain purges captured liquid with no intervention required
Visual indicator monitors filter condition
Membrane air dryer reduces plant air dew point by as much as 150 F (83 C)
Pressure regulator de-pressurizes the air and ensures that the proper flow
rate of air is introduced into the reservoir
APPLICATIONS
Lubricant system reservoirs
Diesel storage tanks
Oil storage tanks
Gear boxes
Hydraulic system reservoirs
The Reservoir Air Dryer is not recommended for use on
*
6.0 in ( 15.2 cm )
AIR OUTLET
1/4" NPT
AIR INLET
1/4" NPT
Accessories
PARTS
Part Number Description Application
DFF1005 I-12 Blanking Cap Blank off up to 6 orifices on I-12 manifold for flush mounting
P563107 4-Bolt Code 61 Flange to 1" NPT Adapter Adapts P568583 Dual Head to 1" NPT
P573642 Threaded Pipe Nipple 11/4" NPT, for connecting two P570330 single heads in series
Small oil tanks under 250 gal. / 1000 liters, 1" NPT,
P564669 ABS Breather, 3 Micron
splash containment for mobile applications
P574177 Visual Service Indicator 50 psi / 345 kPa / 3.45 bar For single heads and hP heads, industrial grade green to red
P165965 Visual Service Indicator 25 psi / 172 kPa / 1.72 bar For single heads and hP heads, industrial grade green to red
P573682 Upstream Pressure Gauge Adapter For single and dual heads, 1/8" NPT
For single and dual heads, 1/8" NPT, center back mount,
P573681 Pressure Gauge, 0 60 psi / 414 kPa / 4.1 bar
1" diameter, use with P573682 adapter
For single and dual heads, 1/8" NPT, center back mount,
P563296 Pressure Gauge, 0 -100 psi / 689 kPa / 6.89 bar
2" diameter, use with P573682 adapter
SAMPLING TOOLS
Part Number Description Application
P563212 Test Point Heads and Manifolds For all Clean Solutions manifolds, 1/8" NPT to M16 x 2
TEST KIT
Part Number Description Application
X009329 Patch Test Kit Test kit for measuring fluid cleanliness
P567869 0.8 Micron Membrane Filter Spares for Patch Test Kit, purchase in multiples of 100
P567868 5.0 Micron Membrane Filter Spares for Patch Test Kit, purchase in multiples of 100
P567865 Analysis Cards Spares for Patch Test Kit, purchase in multiples of 50
Accessories vary by geographical region. Consult your local Donaldson representative for more information.
The colder the fluid, the higher the viscosity, so the lowest potential
WATER HONEY
temperature of the fluid during filtration is the best measure for sizing
a bulk filtration system. Due to the high specific heat capacity of fluids, Temperature greatly impacts fluid
viscosity. Consider that ISO 32
the lowest ambient temperature may not be an accurate reflection of the oil at 104 F / 40 C has the same
actual fluid temperature. Avoid oversizing your system by using the stored viscosity as diesel fuel (similar to
water). When temperatures drop
fluid temperature and not the lowest ambient temperature, which tends to
to -4 F / -20 C, the viscosity
be lower than the temperature of the fluid in storage or transport. of that ISO 32 oil increases
dramatically to over 2,000
centistokes, which is similar to
honey at room temperature.
The chart below demonstrates the pressure drop experienced by a filter with
various viscosities and flow rates. The steeper the pressure drop curve, the more
filters that must be added to the system. Additional filters plumbed in parallel will
decrease the flow rate per filter, lowering the pressure drop and allowing existing flow
rates to be maintained.
2.0 250
32 1.5
cSt cSt
20
1.6
1.0
Less
1.2
Filters
0.8 10
Donaldson Company, Inc.
0.5
3
cSt 0.4
0 0 0.0
25 30 35 0 10 20 30 40 50 60
Flow Rate (GPM)
1 2
Define product flow rate, fluid type and Use the table on the page 26 to
pressure drop restriction. New systems determine fluid viscosity using the fluid
should ideally have less than 15 psi / 1 bar type and temperature.
pressure drop.
INFORMATION GATHERING
FLOW RATE:
FLUID TYPE:
PRESSURE DROP:
TEMPERATURE:
3 4
Select the appropriate filter based Determine the filter pressure drop using
on desired ISO cleanliness code and the flow rate and the fluid viscosity
working pressure (see pages 10 and 11). according to the appropriate chart on pages
30 31. Add the manifold pressure drop
using the flow rate on page 15 to calculate
total pressure drop.
(BAR)(BAR)
(BAR)
cSt 2.0
(PSI) (PSI)
(PSI) (PSI)
2.0
(BAR)
Drop (PSI)
Drop Drop
Drop Drop
Drop
20 20
150 cSt
Drop
90 20
Pressure cSt 1.5 cSt 1.61.5
Pressure
Pressure
20
Pressure
20
150
Pressure
1.0 20
Pressure
1.0
cSt 32 1.2
Pressure
Pressure
Pressure
Flow Rates and Pressure Drops
10 1.0 cSt
10 1.0
Inc.
320.8
Inc.
0.5 1010 cSt0.5
Company,
10
Company,
3
Donaldson
0 0.0 0 3 cSt 0.0
Donaldson
FUEL AND WATER ABSORBING FILTERS 0 10 20 30 40 50 60 0 (Diesel) 0 0
00 510 10 20 15 30 20 40 25 5030 60
35 0
0 0.0 0 0.0
Flow Rate (GPM) Flow Rate (GPM)
0 10 20 30 40 50 60 0 10 20 Flow Rate30(GPM) 40 50 60
Flow Rate (GPM) Flow Rate (GPM)
DBB8777--Compact
DBB5333 Winter Fuel Filter
Fuel Filter DBB8666--Heavy
DBB8664 Fuel Filter
Oil Filter
DBB8777 Flow
-Flow
Winter
Rate Fuel
(LPM)
Rate (LPM) Filter DBB8666
DBB8665 -Flow
Flow -Rate
Light
Rate Fuel
(LPM)
OilFilter
(LPM) Filter
00 20 50 40 10060 80150 100 200 120 0 0 50 50 100100 150 150 200 200
40
50 Flow Rate (LPM) 40 40 Flow Rate (LPM)
1500 750 250 Flow Rate (LPM)
0 50 cSt 100 150 200 1500 6000
750 250
cSt cSt 2.53.2 00 cStcSt
cSt
50
50
cSt
100
10090 150
150 60
200
200 2.5 2.5 0
40 40 cSt cSt
1500 40 40
750 cSt 250 1500 7503000 250 750
90
150 cSt 2.8 3000 1500 500 1500
40 cSt cSt 2.5 cSt 60
30 cSt
30 30
cSt cSt cStcSt cSt
cSt cSt
cSt 2.52.5 cSt
2.0 1500 750 500 2.0 2.0
2.4 cSt cSt 250
150 cSt cSt cSt
Drop (BAR)
30 32
Drop (BAR)
(PSI)
30 200
Drop (PSI)
(BAR)
(BAR)
20 32 1.5
20 cSt
(PSI)
DropDrop
cSt
Drop (BAR)
DropDrop
Drop(PSI)
90 cSt 1.51.5
Pressure
Pressure
Pressure
Pressure
20
Drop
20
Pressure
1.0 20
20 1.0 20
1.2 20
150 1.0
cSt
cSt
Pressure
32 cSt
Pressure
Pressure
Pressure
10
Pressure
1.0 10
10 1.01.0
Company, Inc.
0.8
Company, Inc.
(Diesel)0.5
3 cSt 0.50.5
Donaldson
0 0.0 0
00 3 cSt (Diesel)0.0 0.0
10 20 30 40 50 60 0 0
0
10 20 30 40 50 60
0 5 10 15 20 25 30 (Diesel) 35 0 10 20 30 40 50 60
Donaldson
0 Flow 0.0
FlowRate
Rate(GPM)
(GPM) 00 Flow Rate (GPM) 0.00.0 0
0 10 20 30 40 50 60 00 10
10 2020 Flow Rate (GPM)4040
3030 5050 6060 0
Flow Rate (GPM) Flow
Flow Rate
Rate (GPM)
(GPM)
cSt
Drop (PSI)
(BAR)
10
Drop (PSI)
(BAR)
250 0.8
Pressure
1.5
Pressure
20 1.5
Drop
10 20 cSt 1.5 20
Drop
1.6
Drop
20 32 cSt 20
150 0.4
Pressure
Pressure
Pressure
cSt
Pressure
5
Pressure
1.2 1.0
Pressure
Donaldson Company, Inc.
1.0
1.0 1.0
10 3 cSt 32 cSt 0.4 32 cSt 32
0.8 5 3 cSt 10 10
Donaldson Company, Inc.
(Diesel) cSt
Inc. Inc.
10
0.5 0.5
3 cSt 3 cSt
0 5 10 15 (Diesel) 20 (Diesel)3 cSt
(Diesel)
Donaldson
0 (Diesel)
00 Flow Rate (GPM) 00.0 0 0.0 0
Donaldson
35 0 0 60 0.0
0
10
5
20 30
10
40
15
50
20 00 10 20 30 40 50 60 0.0
0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Flow
Flow Rate
Rate (GPM)
(GPM) Flow Rate (GPM)
Flow Rate (GPM) Flow Rate (GPM)
St 2.0 2.0
320.8
(BAR)
cSt
(BAR)
(PSI)
10
90 cSt90 1.5 1.5
Drop
Drop
Drop
20 20
0 cSt
Pressure
Pressure
32 cSt
Pressure
1.0 1.0 5
Donaldson Company, Inc.
32 cSt32
10 cSt 10
Inc.Inc.
10 3 cSt
Donaldson Company, Inc.
0.5 3 cSt
Donaldson Company, Inc.
(Diesel) 0.5
Company,
3 cSt (Diesel)
0 0
3 cSt
(Diesel)
(Diesel)
Donaldson
0 0.0 0 5 10 15 20
0 0.0
Donaldson
0.0 0 0.0
0 10 20 30 40 50 60 0 10 20Flow Rate (GPM)
30 40 50 60
60 0 10 20 30 40 50 60
Flow Rate (GPM) Flow Rate (GPM)
Flow Rate (GPM)
DBB7733 DBB8666
- Compact Winter
- Fuel Fuel Filter
Filter
30 Clean Fuel & Lubricant
0
FlowSolutions
Rate (LPM)
Flow Rate (LPM)
20 40 60
MyCleanDiesel.com
0 50 100 150 200
20
40
250
1500 750 250 cSt 90 90 cSt
2.5 cSt cSt cSt cSt 60 1.2
2.5
3.2
cSt 2.5
2.8 3000 1500 750 500
40 cSt cSt
cSt cSt
30
0.8 10
0 0 0 0.0
0 5 10 15 20 25 30 35 0 10 20 30 40 50 60
LUBRICANT FILTERS
Flow Rate (GPM)
Flow Rate (GPM)
DBB5333 - Compact
DBB8665 - Light Oil FuelFilter
Filter DBB8664
DBB0248 - Heavy
- Water Oil FilterFilter
Absorbing
P565185
Flow -Rate
Rate
Flow
8(LPM)
Micron
(LPM)
hP Flow
FlowRate
Rate(LPM)
(LPM)
P565183 - 14 Micron hP
0 0 20 50 40 60
100 80 150 100 120
200 00 50
50 100
100 150
150 200
200
Flow Rate (LPM) Flow Rate (LPM)
50 40 4040
0
3000 10 20 30 40 50 60 6000 0 10 20 30 40 50 60
3.2 1500
40 cSt 2.5 cSt
cSt 40 2.5
5000 3000
1500 750
1500 750 500 500 250 5000 3000 1500 750 2.5 500
cSt cSt
cSt cSt
cSt cSt cSt cSt cSt 2.8
2.5 3000
750 1500 250750
cSt 150
cSt 500cSt cSt cSt 2.
40 cSt cStcSt cSt
200 cSt cSt cSt
30 3030
cSt 2.0 2.0
2.0
2.4
30 30
(BAR)
Pressure Drop (BAR)
2.0 2.
Drop(BAR)
30 2.0
Drop (PSI)
Drop
1.6
1.5 1.
cSt cSt
20 20 20
Pressure
Pressure
Pressure
1.0
1.2 1.0
1.0
32
10 1.0 cSt 1.
100 0.8 1010
Inc.
Company, Inc.
10 cSt 0.5 0.5
0.5 100
Company,
10 10
Donaldson Company,
3 cSt
Inc.
cSt 32 0.4
0.5 3 cSt 0.
cSt Company,
Donaldson (Diesel)
Donaldson
0 0 0 0.0 00 0.0
0.0 32cSt
0 0 5 10 10 20 15 30 20 4025 30
50 3560 00 10
10 20
20 30
30 40
40 50
50 60
60
Donaldson
0.0 0 0.
Flow Rate 8(GPM)
0 4 Flow Rate (GPM) 12 16 0 Rate
Flow
Flow Rate(GPM)
(GPM) 4 8 12 16
32
(BAR)
Pressure Drop (PSI)
2.0 30 2.0 2.
Pressure Drop (PSI)
(BAR)
Drop (PSI)
(BAR)
20
Drop
Pressure Drop (PSI)
(PSI)
20 250
20
Drop
Drop
DropDrop
1.5 cSt90 1.5 cSt 1.
1.5 cSt 1.5
Pressure
20 20 20 20
Pressure
Drop
1.0 20 1.0
Pressure
150
Pressure
Pressure
Pressure
100 100
cSt
32 cSt
Pressure
cSt cSt
Pressure
10 1.0 10 1.0 1.
1.0 100 1.0
Inc.
Inc.
0.5 32 0.5
3cSt
Company,
cSt
Company,
10 10 10 10 cSt
3 cSt 10 (Diesel)
Inc.
Inc.
Donaldson Company, Inc.
32 0.5
Inc.
32
(Diesel) 0.5 0.
Company,
cSt 0.5
Company,
cSt 0.5
Company,
Donaldson
Donaldson
0 0.0 0 0.0 32
3 cSt cSt
0 10 20 30 40 50 60 0 10 20 30 40 50 (Diesel)60
Donaldson
Donaldson
Donaldson
0 0 0.0
0.0 0 0.0 0.
Flow Rate 0 0.0
0 4 8 (GPM) 12 16 0 4 Flow
0 Rate
8 (GPM) 4 12 8 16 12 16
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Flow Rate (GPM) Flow Flow Rate (GPM)
Flow Rate (GPM) Flow Rate (GPM)
Rate (GPM)
30
Drop(BAR)
30 30 2.0
(PSI)
0.8
2.0 2.0
(BAR)
(PSI)(PSI)
30
3
10 0.20
Pressure Drop (BAR)
2.0 32
(BAR)
Drop
Drop
Pressure Drop (PSI)
P565184
Drop (BAR)
cSt
Drop
DropDrop
(PSI)
1.5
Pressure
Pressure
Pressure
Drop
20
250 0.15 20
Pressure
Pressure
Drop
2 32 cSt 20
100
cSt 1.5
0.4 cSt
cSt
20
Pressure
5
Pressure
1.0
Pressure
Pressure
Inc.
1.0
0.10 1.0
Company,
3 cSt
10 1 3 cSt 32 cSt 1.0 10
10
(Diesel)
Inc.
Inc.
Donaldson Company, Inc.
(Diesel) 0.05 32
Inc.
10 0 cSt
3 cSt 0.5
Company,
0 cSt
Inc.
0 (Diesel)
Donaldson
Donaldson
0 0.0
Donaldson
0 0 4 Flow Rate
8 (GPM) 12 32cSt 160.0 0 0 4 8 12 16 0.0
0 10 20 30 40 50 60
Donaldson
0 0.0 0 10 20 30 40 50 60
Flow Rate (GPM) Flow Rate (GPM)
0 4 8
Flow Rate (GPM) 12 16 Flow Rate (GPM)
Flow Rate (GPM)
hP Filters @ 32 cSt*
DBB7733 - Compact Winter Fuel Filter
2 Micron hP
Flow Rate (LPM) 0 10 20
Flow Rate (LPM)
30 40 50 60
donaldsonfilters.com
0 20
20
40
Flow Rate (LPM)
60 5 Clean Fuel & Lubricant Solutions 31
0 10 20 30 40 50 60
250 P565183 0.30
40 cSt 90 cSt
5000 3000 1500 750 1.2 4
cSt cSt cSt cSt 2.5
Global Presence with a Local Touch
At Donaldson, weve built a strong, flexible and responsive Logistics We work with a network of transportation and
distribution network to serve our customers around the world. logistics companies, consolidators and cross-docking facilities to
deliver products to distribution partners quickly and efficiently.
Localized Manufacturing It starts with 30+ manufacturing
locations around the world producing most filters in the regions Distribution Partners Weve built one of the largest,
where theyre used. strongest and most responsive distributor networks in the filter
industry meaning you can find the filters and support you need,
Primary Distribution Centers Filters then move to our nearly anywhere in the world.
regional warehouses and distribution center hubs meaning the
filters you need are never far away.