Академический Документы
Профессиональный Документы
Культура Документы
Electromechanical Materials
-
Testing Machines EM1 series
MICROTEST
MICROTEST, S.A.
8
Instruments and Equipments for Materials Testing
(+34) 91 796 33 32 www.microtest-sa.com
Electromechanical Materials Testing Machines EM1 MICROTEST
8
Electromechanical Materials Testing Machines EM1 MICROTEST
8
High stability, mainly at low speed or long term tests (corrosion under tension tests, creep
tests, etc.).
Capability of keeping the load during long intervals, with error under 0.1% of the applied
force, or even better (< 0,01%) in the case of calibration by comparison force standard
machines or high stability of load tests .
Electromechanical machines can be operated at speeds ranging from a minimum of
0.0001mm to a maximum of 200 or 1000 mm/min, depending on the model, which
accommodates a wide range of materials and specimens.
Minimum maintenance: They do not need oil, filter or joints replacement.
They do not need extra space for hydraulic power source and they do not need any pipe or
external fittings to transmit the mechanical power.
Very low noise in comparison with hydraulic systems and without the risk of leakage of oil.
Low consumption of energy and no need of expensive cooling systems.
Moreover, the displacement of the moving MICROTEST EM1/FR machines have ever
crosshead allows the application of the load shown a very good behavior in long term
without impact, in a continuous way, tests, where it is necessary to keep the load
disregarding the state of cleanliness of or the position during long time at a high
electro-valves or servo-valves needed in level of stability.
hydraulic systems.
MICROTEST can provide a great variety of grips and accessories, depending on the material or test.
Among others:
Compression platens.
Pneumatic or manual grips for tensile tests with different jaws.
Bend fixtures.
Other test fixtures (shear, friction, tear, peel, etc)
Extensometers, furnaces, climatic chambers, etc.
This flexibility makes EM1 machines very suitable in most of the standardized axial tests,
where the force to be applied is under the load capacity of the machine, in tensile test or
compression tests in the same single test zone.
Among others, with the suitable fixture, the following tests can be done:
Tensile tests on metal samples: standard shapes, ribbons, springs, screws, fasteners,
washers, wires, cables, elastomeric samples, etc
High temperature creep tests
Corrosion under tension tests.
Tensile tests on polymers, composites, rubbers, textiles, ropes, webs, wood, etc.
Tensile tests on standardized steel samples.
Tensile, shear or bending tests on aluminium samples or profiles.
Compression tests on concrete, mortars, ceramics, foams, wood, rocks, etc.
Friction tests, peel tests. Shear, etc.
Bending tests on mortars, concrete, ceramics, wood, paving tiles, etc.
CBR and Marshall test.
Calibration of force transducers (EN ISO 376).
LOWER CHASSIS
It contains the electromechanical driving The base plate of this frame has also the nuts
system, composed by: motor, gearbox, and bearing units to allow the soft movement
pulleys, ball screws, bearings, etc. and of the moving crosshead when the screw is
electric elements to control the machine. actuated by the driving system.
Over this lower structure the load frame The dimensions of this chassis can be
stands. modified under demand.
- The control and measurement is performed by MICROTEST. This electronic board provides
by the SCM3000 electronic board developed a closed loop control of the machine and
analogue to digital conversion for at least 8 SCM3000 software helps the user to
channels. The control includes digital automate his operations, providing a
input/output lines connected with the powerful Method and Result Editor, with the
machine and motor driver covering the rest possibility of exportation of data to Excel
of the control and security functions of the or ASCII files that allows the generation of
control system. The machine control can be customized reports. The test curves can also
monitored by means of a computer via USB be rescale, recall and re-plot by a Graphics
connection. The software SCM3000 allows Editor
also the recording of the different quantities
data during the test. The control system also includes: software
selectable servo-control by force or by
EM1/FR machines make use of this SCM3000 displacement (or other quantity), displays for
software that enhances the features of the the configured channels, digital zeroing of
machine for any kind of test or material, any channel, fully configurable channels,
allowing the user the full control of any of the calculated channels, configurable alarms,
functionalities of the machine. Its a very digital recording of every configured quantity,
reliable and adaptable system. The selectable sampling, automation of the tests
description of the SCM3000 software (tests methods and complex sequences of
specifications is shown apart. All database movement or load), definition of test
and controlled parameters are managed parameters, calculations, graphical display of
using a computer (included) with the recorded data and test results, etc.
MICROTEST SCM3000 software (English
version).
Technical Specifications
EM1/250 EM1/100/R EM1/200/R
MODEL EM1/20 EM1/50 EM1/100 EM1/200
EM1/300 (reinforced) (reinforced)
FORCE
kN 20 50 100 200 250-300 100 200
CAPACITY
MOVING 150 200 350 200 200
CROSSHEAD mm
TRAVEL (typ.) Other values under request
Columns 2 columns
Crosshead 100
Max. Speed
mm/min 200
(typ. values in
bold) 1000 500
0.0001 0.0001 0.0005 0.0005
Crosshead min.
mm/min 0.001 0.001 0.001 0.001
Speed
0.005 0.005 0.005 0.005
Position
mm <0.0001
resolution
Horizontal test
mm 350-500 450-700
space
Max. Vertical 950-1250-
mm 700-1000 880-1250-1600
Test space (**) 1600
1/Stiffness
mm/N <5.10-6 <5.10-6 <4.10-6 <4.10-6 <4.10-6 <1.5.10-6
Std.
Typical H(mm) 1420 2070 2360-2560 2950
Dimensions W(mm) 700 900-1150 990-1250 1200
HxWxD (*) D(mm) 415 500-600 500-600 600
150kg(table top)
Weight (*) kg 400kg 570kg 600kg 650kg
400kg(floor standing)
Accuracy class typ.
0.5 0.5 0.5 0.5 0.5 0.5 0.5
ISO 7500
Typical Main Force PB2/20 PB2/50 PB2/100 PB2/200 PBF/250 PB2/100 PB2/200
transducer x Resolution X0.5N x1N x2N x5N x10N x2N x5N
Typical secondary Force
TSC1/2kN TSC1/5kN PB2/20 PB2/20 PB2/50 PB2/20 PB2/20
transducer x Resolution
X0.05N X0.1N X0.5N X0.5N x1N X0.5N X0.5N
(***)
Std. Nominal
230Vac 230Vac 230Vac 230Vac 230Vac 230Vac 230Vac
Supply Voltage VAC
1phase 1phase 1phase 1phase 1phase 1phase 1phase
(*)
Std. Power
Rating kW 0.7 1 1.5 2 2.5 2 2
Continuous (*)
(*) Dimensions, weights and supply voltage can be adapted to the customers needs. They are only approximate
and dependant on the specific technical proposal.
MICROTEST, S.A.
microtest@microtest-sa.com http://www.microtest-sa.com