Академический Документы
Профессиональный Документы
Культура Документы
1) Wall idealised as a propped cantilever ( i.e. pinned at top and fixed at base )
2) Wall is braced.
3) Maximum slenderness of wall is limited to 15, i.e [ 0.9*(He-Tb/2)/Tw < 15 ]
4) Maximum Ultimate axial load on wall is limited to 0.1fcu times the wall cross-sectional area
5) Design Span (Effective wall height) = He - (Tb/2)
6) -ve moment is hogging ( i.e. tension at external face of wall )
+ve moment is sagging ( i.e. tension at internal face of wall )
7) " Wall MT. " is maximum +ve moment on the wall.
8) Estimated lateral deflections are used for checking the P effect .
Force Lever arm Base MT. Wall MT. Reaction at Reaction at Estimated Elastic
Lateral Force (kN) to base (m) (kNm) (kNm) Base (kN) Top (kN) Deflection (mm)
PE = 26.98 0.78 -10.11 4.14 23.15 3.82 0.2
PS(GK) = 11.62 1.16 -4.68 2.54 8.50 3.13 0.2
PS(QK) = 11.62 1.16 -4.68 2.54 8.50 3.13 0.1
PL(GK) = 10.00 2.12 -3.32 4.48 3.69 6.31 0.1
PL(QK) = 7.50 2.12 -2.49 3.36 2.77 4.73 0.0
PW = 0.00 0.00 0.00 0.00 0.00 0.00 0.0
Total 67.73 -25.28 17.06 46.61 21.12 0.6
Vertical FORCES (kN) Lever arm (m) Moment (kNm) BEARING PRESSURE
Wall load = 100 1.49 148.75 0.00 (kN/m) 3.50
0
Wall (sw) = 14.31 1.49 21.29
Base = 29.40 0.00 0.00
50
Earth = 6.45 1.68 10.80
Water = 0.00 1.68 0.00
100
Surcharge = 1.50 1.68 2.51
Line load = 20.00 0.00 0.00
150
V= 171.66 Mv = 183.35
200
MOMENT due to LATERAL FORCES, Mo = -18.11 kNm
SLIDING AT BASE (using overall factor of safety instead of partial safety fa F.O.S = 1.50