Академический Документы
Профессиональный Документы
Культура Документы
This update gives you a listing of all Australian Standards, draft standards, amendments and other
publications issued in January 2017.
To help you identify publications of interest, there are three separate listings:
Standards Australia publications grouped according to subject, based on the International
Classification System.
Standards Australia publications, by type, listed in numerical order.
Publications from SAI Global, listed in numerical order.
For full details of each document, click on link provided or, if you are working off a paper copy, go to
infostore.saiglobal.com/store and key in the reference number.
> Click for further information Gate valves for waterworks purposes - Metal
seated
03 - SERVICES. COMPANY ORGANIZATION,
MANAGEMENT AND QUALITY. ADMINISTRATION.
> Click for further information
TRANSPORT. SOCIOLOGY
DR AS/NZS 2638.2:2011 Amd 1:2017 CP
DR AS/NZS IEC 61078:2017 CP Gate valves for waterworks purposes - Resilient
Reliability block diagrams seated
> Click for further information
Page 1
25 - MANUFACTURING ENGINEERING DR AS/NZS 60076.3:2017
Power transformers - Insulation levels, dielectric
AS/NZS 62841.2.11:2017
tests and external clearances in air
Electric motor-operated hand-held tools,
transportable tools and lawn and garden
> Click for further information
machinery - Safety - Particular requirements for DR AS/NZS 61882:2017 CP
hand-held reciprocating saws Hazard and operability studies (HAZOP studies) -
Applies to reciprocating saws such as jig saws and
Application guide
sabre saws.
Page 2
AS/NZS 60335.2.11:2017 AS/NZS 60335.2.90:2017
Household and similar electrical appliances - Household and similar electrical appliances -
Safety - Particular requirements for tumble Safety - Particular requirements for commercial
dryers (IEC 60335-2-11 Ed 7.2, MOD) microwave ovens
Deals with the safety of electric tumble dryers intended Deals with the safety of microwave ovens with a cavity
for household and similar purposes, their rated voltage door intended for commercial use, their rated voltage
being not more than 250 V for single-phase appliances being not more than 250 V for single-phase appliances
and 480 V for other appliances. connected between one phase and neutral and 480 V
> Click for further information for other appliances.
> Click for further information
AS/NZS 60335.2.25:2011/Amdt 2:2017
Household and similar electrical appliances - AS/NZS 62841.2.11:2017
Safety - Particular requirements for microwave Electric motor-operated hand-held tools,
ovens, including combination microwave ovens transportable tools and lawn and garden
> Click for further information machinery - Safety - Particular requirements for
hand-held reciprocating saws
AS/NZS 60335.2.25:2011 (IEC TEXT)/Amdt Applies to reciprocating saws such as jig saws and
2:2017 sabre saws.
Household and similar electrical appliances -
> Click for further information
Safety - Particular requirements for microwave
ovens, including combination microwave ovens AS/NZS 62841.3.10:2017
Electric motor-operated hand-held tools,
> Click for further information peripheral gaps, if any, not exceeding 10 mm and with
a rated no-load speed not exceeding a peripheral speed
AS/NZS 60335.2.75:2013/Amdt 2:2017 of the wheel of 100 m/s with the maximum wheel
Household and similar electrical appliances - diameter and a wheel diameter range of 250 mm to
Safety - Particular requirements for commercial 410 mm.
dispensing appliances and vending machines
> Click for further information
Page 3
AS 1679.2-2005 AS 3632-1993
Reusable all-glass or metal-and-glass syringes for Powered rotary lawnmowers - Blades and blade
medical use - Design, performance requirements mounting attachments
and tests AS 3638-1993
AS 1737-1975 Test sieving procedures
Dimensions of scarifier share mountings AS 3703.1-1989
AS 1794-1975 Long-span corrugated steel structures - Materials
Commercial tolerances on finished parts of and manufacture
fluorocarbon AS 3836-1998
AS 1886-1991 Rack conveyor washers for health care facilities
Glossary of terms relating to plastics AS 4057-1992
AS 1886 Supp 1-1994 Powered walk-behind and hand-held lawn
Glossary of terms relating to plastics - Plastics trimmers and lawn edge trimmers - Mechanical
recycling terminology (Supplement to AS 1886- safety requirements and test methods
1991) AS 4178-1994
AS 1946-2002 Electromagnetic door holders
Sterile hypodermic needles for single use AS 4608-2004
AS 2145-2002 Dispute management systems
Stainless steel needle tubing for manufacture of AS 4820-2006
medical devices Bonded abrasive products - Permissible
AS 2182-1998 unbalances of grinding wheels as delivered -
Sterilizers - Steam - Benchtop Static testing
AS 2192-2002 AS 4863.1-2000
Sterilizers - Steam - Downward-displacement Particle size analysis - Laser diffraction methods -
AS 2437-1987 General Principles
Flusher/sanitizers for bed pans and urine bottles AS 4931-2000
AS 2582.13-2006 Industrial wire screens - Technical requirements
Complete, filled transport packages - Methods of and testing
test - Rolling test AS 4932.2-2002
AS 2582.17-2006 Representation of results of particle size analysis
Complete, filled transport packages - Methods of - Calculation of average particle sizes/diameters
test - Vertical random vibration test and moments from particle size distributions
AS 2625.1-2003 AS 5009.2-2003
Mechanical vibration - Evaluation of machine Determination of particle size distribution by
vibration by measurements on non-rotating parts centrifugal liquid sedimentation methods -
- General guidelines Photocentrifuge method
AS 2625.4-2003 AS 5012-2003
Mechanical vibration - Evaluation of machine Determination of particle size distributions -
vibration by measurements on non-rotating parts Electrical sensing zone method
- Industrial machines with nominal power above AS 5037-2005
15 kW and nominal speeds between 120 r/min Knowledge management - a guide
and 15 000 r/min when measured in situ AS ISO/IEC 6523.1-2005
AS 2710-1984 Information technology - Structure for the
Screw gauges - Verification identification of organizations and organization
AS 2775-2004 parts - Identification of organization identification
Mechanical vibration and shock - Mechanical schemes
mounting of accelerometers AS ISO/IEC 6523.2-2005
AS 2829-1986 Information technology - Structure for the
British Association (BA) screw threads and identification of organizations and organization
associated gauges and gauging practice parts - Registration of organization identification
AS 2853-1986 schemes
Enclosures - Temperature-controlled - AS ISO/IEC 9075.1-2005
Performance testing and grading Information technology - Database languages -
AS 2929-1990 SQL - Framework (SQL/Framework)
Test methods - Guide to the format, style and AS ISO/IEC 9075.2-2005
content Information technology - Database languages -
AS 2945(Int)-2002 SQL - Foundation (SQL/Foundation)
Batch-type washer/disinfectors for health care AS ISO/IEC 9075.3-2005
facilities Information technology - Database languages -
AS 3528-1988 SQL - Call-Level Interface (SQL/CLI)
Cylindrical screw threads - Vocabulary AS ISO/IEC 9075.4-2005
AS 3562-1990 Information technology - Database languages -
Lighting equipment for bicycles SQL - Persistent Stored Modules (SQL/PSM)
Page 4
AS ISO/IEC 9075.5-2005 AS ISO/IEC 13249.5-2005
Information technology - Database languages - Information technology - Database languages -
SQL - Host Language Bindings (SQL/Bindings) SQL multimedia and application packages - Still
AS ISO/IEC 9075.9-2005 image
Information technology - Database languages - AS ISO/IEC 13249.6-2005
SQL - Management of External Data (SQL/MED) Information technology - Database languages -
AS ISO/IEC 9075.10-2005 SQL multimedia and application packages - Data
Information technology - Database languages - mining
SQL - Object Language Bindings (SQL/OLB) AS ISO/IEC 15418-2006
AS ISO/IEC 9075.11-2005 Information technology - EAN/UCC Application
Information technology - Database languages - Identifiers and Fact Data Identifiers and
SQL - Information and Definition Schemas Maintenance
(SQL/Schemata) AS ISO/IEC 15424-2006
AS ISO/IEC 9075.13-2005 Information technology - Automatic identification
Information technology - Database languages - and data capture techniques - Data Carrier
SQL - SQL Routines and Types Using the JavaTM Identifiers (including Symbology Identifiers)
Programming Language (SQL/JRT) AS ISO/IEC 15452-2005
AS ISO/IEC 9075.14-2005 Information technology - Specification of data
Information technology - Database languages - value domains
SQL - XML-Related Specifications (SQL/XML) AS ISO/IEC 15459.1-2006
AS ISO 10555.1-2002 Information technology - Unique identifiers -
Sterile, single-use intravascular catheters - Unique identifiers for transport units
General requirements AS ISO/IEC 15459.2-2006
AS ISO/IEC 11179.1-2005 Information technology - Unique identifiers -
Information technology - Metadata registries Registration procedures
(MDR) - Framework AS ISO/IEC 15459.3-2006
AS ISO/IEC 11179.2-2005 Information technology - Unique identifiers -
Information technology - Metadata registries Common rules for unique identifiers
(MDR) - Classification for data elements AS ISO/IEC 15459.4-2006
AS ISO/IEC 11179.3-2005 Information technology - Unique identifiers -
Information technology - Metadata registries Unique identifiers for supply chain management
(MDR) - Registry metamodel and basic attributes AS ISO/IEC 15944.1-2005
AS ISO/IEC 11179.4-2005 Information technology - Business agreement
Information technology - Metadata registries semantic descriptive techniques - Business
(MDR) - Formulation of data definitions operational aspects of Open-edi for
AS ISO/IEC 11179.5-2005 implementation
Information technology - Metadata registries AS ISO/IEC 15961-2006
(MDR) - Naming and identification principles for Information technology - Radio frequency
data elements identification (RFID) for item management - Data
AS ISO/IEC 11179.6-2005 protocol: application interface
Information technology - Metadata registries AS ISO/IEC 15962-2006
(MDR) - Registration Information technology - Radio frequency
AS EN 12470.2-2004 identification (RFID) for item management - Data
Clinical thermometers - Phase change type (dot protocol: data encoding rules and logical memory
matrix) thermometers functions
AS EN 12470.3-2004 AS ISO/IEC 15963-2006
Clinical thermometers - Performance of compact Information technology - Radio frequency
electrical thermometers (non-predictive and identification for item management - Unique
predictive) with maximum device identification for RF tags
AS EN 12470.4-2004 AS ISO/IEC 18047.3-2006
Clinical thermometers - Performance of electrical Information technology - Radio frequency
thermometers for continuous measurement identification device conformance test methods -
AS ISO/IEC 13249.1-2005 Test methods for air interface communications at
Information technology - Database languages - 13.56 MHz
SQL multimedia and application packages - AS ISO/IEC 18047.4-2006
Framework Information technology - Radio frequency
AS ISO/IEC 13249.2-2005 identification device conformance test methods -
Information technology - Database languages - Test methods for air interface communications at
SQL multimedia and application packages - Full- 2.45 GHz
Text AS ISO/IEC 18047.7-2006
AS ISO/IEC 13249.3-2005 Information technology - Radio frequency
Information technology - Database languages - identification device conformance test methods -
SQL multimedia and application packages - Test methods for active air interface
Spatial communications at 433 MHz
Page 5
AS ISO/IEC 19762.1-2006 MP 91-2000
Information technology - Automatic identification Dynamic approaches to healthcare risk
and data capture (AIDC) techniques - management
Harmonized vocabulary - General terms relating MP 15.6-1990
to AIDC Standards Australia Style Manual - Drafting and
AS ISO/IEC 19762.2-2006 interpretation of standards from a legal
Information technology - Automatic identification perspective
and data capture (AIDC) techniques - MP 2-1938
Harmonized vocabulary - Optically readable Report on the standardization of minimum
media (ORM) requirements for sewerage by-laws
AS ISO/IEC 19762.3-2006 HB 49.1-1993
Information technology - Automatic identification Sporting Facilities Manual - Sports lighting
and data capture (AIDC) techniques - HB 144:1999
Harmonized vocabulary - Radio frequency Guidance for forestry organisations in the use of
identification (RFID) environmental management system standards
AS ISO/IEC 20943.1-2005 HB 49.2-1993
Information technology - Procedures for Sporting Facilities Manual - Sporting surfaces
achieving metadata registry content consistency - HB 18.58:1993
Data elements Guideline for third-party certification and
AS ISO/IEC 20943.3-2005 accreditation - Guide 58 - Calibration and testing
Information technology - Procedures for laboratory accreditation systems - General
achieving metadata registry content consistency - requirements for operation and recognition
Value domains HB 107-1998
AS ISO/IEC 21000.3-2004 Understanding Standards
Information technology - Multimedia framework HB 24-1992
(MPEG-21) - Digital Item Identification Symbols and abbreviations for building and
AS 60355-2004 construction
An appraisal of the problems of accelerated HB 18.22:2003
testing for atmospheric corrosion Guidelines for third-party certification and
MP 53-2004 accreditation - General criteria for supplier's
Personal financial planning - Part 1: Definitions, declaration of conformity
processes and practices; Part 2: Requirements HB 23-1992
for competence of a Personal Financial Planner; TACT, Thesaurus of Australian construction terms
Part 3: Ethics and experience HB 18.43.1:1998
TR 61340.5.2-2005 Guidelines for third-party certification and
Electrostatics - Protection of electronic devices accreditation - Guide 43 - Proficiency testing by
from electrostatic phenomena - User guide interlaboratory comparisons - Part 1:
RUL ML.1-2008 Development and operation of proficiency testing
Rulings to metal Standards - Cathodic protection schemes
interference levels (Ruling to AS 2832.1-2004) HB 18.43.2:1998
HB 314-2006 Guidelines for third-party certification and
BizDex - A national framework accreditation - Guide 43 - Proficiency testing by
HB 189-2004 interlaboratory comparisons - Part 2: Selection
Knowledge Management Terminology and and use of proficiency testing schemes by
Readings - An Australian Guide laboratory accreditation bodies
Page 6
AS/NZS 60335.2.11:2017
Household and similar electrical appliances - Safety - Particular requirements for
tumble dryers (IEC 60335-2-11 Ed 7.2, MOD)
AS/NZS 60335.2.25:2011/Amdt 2:2017
Household and similar electrical appliances - Safety - Particular requirements for
microwave ovens, including combination microwave ovens
AS/NZS 60335.2.25:2011 (IEC TEXT)/Amdt 2:2017
Household and similar electrical appliances - Safety - Particular requirements for
microwave ovens, including combination microwave ovens
AS/NZS 60335.2.75:2013 (IEC TEXT)/Amdt 2:2017
Household and similar electrical appliances - Safety - Particular requirements for
commercial dispensing appliances and vending machines
AS/NZS 60335.2.75:2013/Amdt 2:2017
Household and similar electrical appliances - Safety - Particular requirements for
commercial dispensing appliances and vending machines
AS/NZS 60335.2.90:2017
Household and similar electrical appliances - Safety - Particular requirements for
commercial microwave ovens
AS/NZS 62841.2.11:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Particular requirements for hand-held reciprocating saws
AS/NZS 62841.3.4:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Particular requirements for transportable bench grinders
AS/NZS 62841.3.10:2017
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Particular requirements for transportable cut-off machines
Drafts
DR AS/NZS 1576.3:2015 Amd 1:2017
Scaffolding - Prefabricated and tube-and-coupler scaffolding
DR AS/NZS 1802:2017
Electric cables - Reeling and trailing - For underground coal mining
DR AS 1940:2017 CP
The storage and handling of flammable and combustible liquids
DR AS/NZS 2638.1:2011 Amd 1:2017 CP
Gate valves for waterworks purposes - Metal seated
DR AS/NZS 2638.2:2011 Amd 1:2017 CP
Gate valves for waterworks purposes - Resilient seated
DR AS 4349.2:2016 Inspection of buildings - Common areas of group titled properties
DR AS/NZS ISO 15489.1:2017 CP
Information and documentation - Records management - Concepts and principles
DR AS ISO 18565:2017 CP
Document management - AFP/Archive
DR AS ISO 19005.3:2017 CP
Document management - Electronic document file format for long-term
preservation - Use of ISO 32000-1 with support for embedded files (PDF/A-3)
DR AS ISO 24517.1:2017 CP
Document management - Engineering document format using PDF - Use of PDF 1.6
(PDF/E-1)
DR AS/NZS 60076.3:2017
Power transformers - Insulation levels, dielectric tests and external clearances in air
DR AS/NZS IEC 61078:2017 CP
Reliability block diagrams
DR AS/NZS 61882:2017 CP
Hazard and operability studies (HAZOP studies) - Application guide
Page 7
Global Publishing Alliance
10010 V3 The Plumbing (gas fitting) Safe Work Method Statement
Safe Work Method Statement - Asbestos (SWMS) is a comprehensive document outlining the
(licensed removal) safety steps involved with gas fitting
The Asbestos (licensed removal) Safe Work Method
> Click for further information
Statement (SWMS) is a comprehensive document
outlining the safety steps for working with and removal 10121 V5
of friable or non-friable asbestos greater than 10 m2 in Safe Work Method Statement - Glass (cutting
area (licence required). onsite)
> Click for further information The Glass (cutting onsite) Safe Work Method Statement
(SWMS) is a comprehensive document outlining the
10023 V3 safety steps with cutting glass to size on site.
Safe Work Method Statement - Brick Cleaning
> Click for further information
The Brick Cleaning Safe Work Method Statement
(SWMS) is a comprehensive document outlining the 10149 V5
safety steps for cleaning brickwork using a petrol- Safe Work Method Statement - Jackhammer
operated high pressure cleaner outdoors at ground The Jackhammer Safe Work Method Statement (SWMS)
level, using cold water and hydrochloric acid/water is a comprehensive document outlining the safety steps
solution. for the operation of petrol, pneumatic or electric
> Click for further information powered jackhammers.
> Click for further information
10038 V5
Safe Work Method Statement - Cabinet 10154 V3
(commercial - domestic) Installation Safe Work Method Statement - Turf Laying
The Cabinet (commercial - domestic) Installation Safe (residential)
Work Method Statement (SWMS) is a comprehensive The Turf Laying (residential) Safe Work Method
document outlining the safety steps for the installation Statement (SWMS) is a comprehensive document
of cabinets (wood, laminate and stainless steel) in outlining the safety steps for the preparation and laying
kitchens, bathrooms, laundries, bedrooms, shops and of turf. This includes preparing sub grade, manual
offices. This SWMS includes installation works on handling, working adjacent to mobile plant.
construction sites and existing premises, both domestic
and commercial.
> Click for further information
> Click for further information general hazardous conditions found on a fire line. This
SWMS does not cover wildfire operations.
10105 V5
> Click for further information
Safe Work Method Statement - Fencing (timber)
The Fencing (timber) Safe Work Method Statement 10186 V4
(SWMS) is a comprehensive document outlining the Safe Work Method Statement - Paving
safety steps with building timber fences (approx. The Paving Safe Work Method Statement (SWMS) is a
1800mm high) on construction sites or residential comprehensive document outlining the safety steps for
areas. Covered in this SWMS is the delivery of the preparation and laying of pavers. This includes
materials, line clearing (earthworks), installation of preparing sub grade, manual handling, working
posts, attachment of palings, and hang gates. adjacent to mobile plant and the safe use of associated
10117 V2
> Click for further information
10119 V3
> Click for further information
Page 8
10236 V3 Covered in this SWMS is the delivery of materials, line
Safe Work Method Statement - Security Guard clearing (earthworks), installation posts, attach panels,
(construction sites) construct and hang gates.
The Security Guard (construction sites) Safe Work
> Click for further information
Method Statement (SWMS) is a comprehensive
document outlining the safety steps for security guard 10378 V3
activities at sites under construction. Safe Work Method Statement - Synthetic Grass
> Click for further information installation of PVC pipework. This SWMS does not cover
civil road allotment drainage or sub-division drainage
10361 V3 systems.
Safe Work Method Statement - Plumbing (pump-
valve) Installation
> Click for further information
10403 V3
10375 V3
Safe Work Method Statement - Landscaping
Safe Work Method Statement - Fencing (sheet
(irrigation)
metal)
The Landscaping (irrigation) Safe Work Method
The Fencing (sheet metal) Safe Work Method
Statement (SWMS) is a comprehensive document
Statement (SWMS) is a comprehensive document
outlining the safety steps for the installation of
outlining the safety steps for the installation of sheet
metal fencing at construction sites and properties.
Page 9
irrigation systems into commercial and domestic The Plumbing (water jetting drains) Safe Work Method
landscape areas on public and private property. Statement (SWMS) is a comprehensive document
> Click for further information outlining the safety steps for the use of an airless spray
unit.
10418 V3
> Click for further information
Safe Work Method Statement - Shade Sail
Installation (residential) 10556 V1
The Shade Sail Installation (residential) Safe Work Safe Work Method Statement - Construction
Method Statement (SWMS) is a comprehensive Labourer
document outlining the safety steps for the installation The Construction Labourer Safe Work Method
of shade sails. This SWMS covers planning, working Statement (SWMS) is a comprehensive document
with machinery, power tools, public safety and outlining the safety steps for the general safety issues
hazardous manual handling. concerned with a labourer working on construction
Page 10
Amendments
With a handful of exceptions, Amendments to Australia Standards are free of charge if downloaded from
the SAI Global Infostore. Use this archive to check if a current Standard has been amended.
Copyright Information
Australian Standards is the registered trade mark of Standards Australia Limited. Australian Standards
standards and other publications are distributed by SAI Global under licence.
Buying Information
Web infostore.saiglobal.com/store
Phone 131 242 (Overseas +612 8206 6010)
Fax 1300 65 49 49 (Overseas +612 8206 6020)
Mail SAI Global Ltd, GPO Box 5420, Sydney NSW 2001, Australia
Sales Outlet
85 Buckhurst Street, South Melbourne VIC 3205
Page 11