Академический Документы
Профессиональный Документы
Культура Документы
1 (a) (i) +1 1
(ii) 2.8.1 1
(ii) 3
(ii) kerana
1
Total 10
Total 10
3 (a) 1. Strong acid is the acid that is completely dissociated in 1
water
2. produce higher concentration of hydrogen ions
1 2
TOTAL 10
Zinc nitrate 1
4 (a)
1 : Place a glowing splinter into the test tube. 1
(b) 2 : Glowing splinter is rekindled / relights. 1
(b)
Volume of gas
released / cm3
Experiment II
Experiment I
Time / s
(d) Use magnesium powder// add catalyst // use HCl with higher 1
concentration.
Total 10
6(a) CnH2n + 2 1
n = 1, 2, 3, .....
(b) | |
A : carbon-carbon double bond // - C = C 1
(c)
1
(d) (i) Butyl propanoate 1
TOTAL 10
BAHAGIAN B
7 (a)
Elements Carbon Hydrogen
Mass/g 85.7 100- 85.7 = 14.3 1
85.7 14.3 1
No of mole 12 1
= 7.14 =14.3
7.14 = 1 14.3 = 2 1
Mole ratio
7.14 7.14
Empirical formula CH2 1
=85.71 % = 81.82 %
1+1
6
( React P with water/steam 1
c Temperature 300 oC
) Pressure 60 atm any 2 2
Catalyst phosphoric acid 3
Total 20
8 (a) (i) A mixture of two or more elements 1
with a certain fixed composition in which the major component is a 1
metal. 2
(ii) 1. Improve the appearance
2. Improve the strength and hardness 1+1
3. Increase the resistance to corrosion
2
[Any two corrections]
(b) (i) Bronze is harder than copper. 1
(ii) 1. Pure copper is made up of same type of atoms and are of the same
size. 1
2. The atoms are arranged in an orderly manner.
3. The layer of atoms can slide over each other. 1
4. Bronze is made up of atoms of different size// 1
In bronze, tin atoms and copper atoms are of different size.
5. The atoms are not orderly arranged// The presence of tin atoms 1
disturb the orderly arrangement of copper atoms.
6. This reduces/prevents the layer of copper atoms from sliding. 1
1
Max5
(iii) Pure copper:
Copper atom
[minimum 3 3 layers ] 1
Bronze:
Tin atom
3
(c) (i) Sulphur trioxide is dissolved in concentrated sulphuric acid to form 1
oleum. 1
Oleum is diluted with water to produce sulphuric acid.
1
7
Total 20
BAHAGIAN C
10 [Table showing the above with volume of acid fixed and time 1
recorded ]
max 12
Total 20
10.
(a) Ion-ion yang hadir dalam larutan NaCl cair ialah Na+, H+, Cl-dan OH-. (1)
Ion Na+ dan ion H+ bergerak ke katod. (1)
H+ dipilih untuk menyahcas kerana ia berada lebih bawah dalam Siri
Elektrokimia. (1)
2H+ + 2e
H (1)
2
Maka, gas hidrogen dihasilkan di katod.
Ion Cl-dan ion OH- bergerak ke anod. Ion hidroksida dipilih untuk
menyahcas kerana ia berada lebih bawah dalam Siri Elektrokimia. (1)
4OH-
2H O + O + 4e (1)
2 2
Dalam larutan NaCl pekat, kepekatan ion Na+ dan ion Cl- tinggi.
Pada anod kepekatan ion klorida yang tinggi menghalang OH- daripada
sampai ke anod. (1)
Maka ion Cl- akan menyahcas membentuk gas klorin. (1)
2Cl - Cl2 + 2e (1)
Kepekatan ion Na+ tinggi. Tetapi ion H+ yang kecil boleh menembusi lapisan ion Na+ untuk
sampai ke katod untuk menyahcas. (1)
+
2H + 2e
H2 (1)
Kayu uji menyala dibawa mendekati mulut tabung yang mengandungi gas yang tidak diketahui.
Jika bunyi pop yang kedengaran, maka gas itu ialah hidrogen. (1)
Kayu uji berbara dibawa mendekati mulut tabung yang mengandungi gas yang tidak diketahui.
Jika kayu uji itu menyala semula, maka gas itu ialah oksigen (1)
Kertas litmus lembap diletakkan dalam tabung uji yang mengandungi gas yang tidak diketahui.
Jika ia adalah klorin, ia akan menukarkan kertas litmus biru kepada merah dan kemudian
melunturkan warnanya. (1)
(b) Takat lebur aluminium oksida tulen ialah lebih kurang 2050oC.
Kriolit akan merendahkan takat leburnya kepada lebih kurang 900oC. (1)
Apabila campuran itu dipanaskan ia melebur.
heat
Al2O3(p) 2Al3+(c) + 3O2-(c) (1)
Ion aluminium bergerak ke katod dan menyahcas dengan menerima 3 elektron.
Al3+ + 3e
Al (1)
Leburan aluminium akan termendak di bawah bekas dan disingkirkan. (1)
Ion oksida bergerak ke anod dan menyahcas dengan membebaskan dua elektron.
O2-
O + 2e
2O2-
O + 4e (1)
2
Gas oksigen bertindak balas dengan grafit untuk menghasilkan gas
karbon dioksida. (1)
Maka anod perlu digantikan dari masa ke masa.