Академический Документы
Профессиональный Документы
Культура Документы
Fusetron
FRS-R
Dual-Element, Time-Delay Fuses -60A
Class RK5 600 Volt
Dimensional Data General Information:
Provides motor overload, ground fault and short-circuit pro-
5" ( 0.31)
tection. When used in circuits subject to surge currents such
.81" ( 0.008)
as those caused by motors, transformers and other inductive
A to 30A
components, these fuses can be sized close to full-load
amperes to give maximum overcurrent protection.
5.5" ( 0.31)
Permits the use of smaller and less costly switches. The time-
1.06" ( 0.008) delay feature makes it possible to use fuse ampere ratings
35A to 60A which are much smaller than those of non-time-delay fuses.
Considerable cost saving occurs by permitting the use of
smaller size switches, panels and fuses themselves.
Provides a higher degree of short-circuit protection (greater
current-limitation) in circuits in which surge currents or tempo-
rary overloads occur.
Catalog Symbol: FRS-R Helps protect motors against burnout from overloads.
Dual-Element, Time-Delay 10 second (minimum) at 500% Gives motor running back-up protection to motors without
rated current extra costs.
Current-Limiting Helps protect motors against burnout from single phasing on
Ampere Rating: to 60A three phase systems.
Voltage Rating: 600Vac (or less) Simplifies and improves blackout prevention (selective
Interrupting Rating: 200,000A RMS Sym. coordination).
dc Ratings (20,000AIC @ 250Vdc) Dual-element fuses can be applied in circuits subject to tem-
Agency Information: porary motor overloads and surge currents to provide both
UL Listed, Std. 248-12, Class RK5, Guide JDDZ, File E4273 high-performance, short-circuit and overload protection.
CSA Certified, C22.2 No. 248.12, Class 1422-02, File 53787 The overload element provides protection against low level
overcurrent of overloads and will hold an overload which is
Catalog Numbers five times greater than the ampere rating of the fuse for a
FRS-R- FRS-R-1 FRS-R-8 minimum of ten seconds.
FRS-R- FRS-R-2 FRS-R-9
FRS-R-fi FRS-R-2 FRS-R-10 Fuse Reducers For Class R Fuses
FRS-R- FRS-R-2 FRS-R-12 Desired Catalog Number
FRS-R- FRS-R-2 FRS-R-15 Equipment Fuse (Case) (Pairs)
Fuse Clips Size 600V
FRS-R- FRS-R-3 FRS-R-17
60A 30A No. 663-R
FRS-R- FRS-R-3 FRS-R-20
30A No. 216-R
FRS-R- FRS-R-3 FRS-R-25 100A
60A No. 616-R
FRS-R-fl FRS-R-4 FRS-R-30
200A 60A No. 626-R
FRS-R- FRS-R-4 FRS-R-35
FRS-R-1 FRS-R-5 FRS-R-40
FRS-R-1 FRS-R-5fl FRS-R-45
FRS-R-1 FRS-R-6 FRS-R-50
FRS-R-1 FRS-R-6 FRS-R-60
FRS-R-1 FRS-R-7
Recommended fuseblocks for
FRS-R-1fl FRS-R-7
Class R 600V fuses
Carton Quantity and Weight See Data Sheet: 1111
Ampere Carton Weight*
Ratings Qty. Lbs. Kg.
15 10 0.40 0.181
17.530 10 0.50 0.277
35-60 10 3.10 1.406
*Weight per carton.
Fusetron
FRS-R
Dual-Element, Time-Delay Fuses -60A
Class RK5 600 Volt
Time-Current Characteristic CurvesAverage Melt
AMPERE
15A
30A
60A
1 1.25
5 6.25
2 2.5 RATING
.2
.5
.6 .8
3.2 4
300
.15
1.6
AMPERE RATING
10
12
.1
.3
.4
8
300
100 100
10
TIME IN SECONDS
10
TIME IN SECONDS
.1
1
.01
.1
10
100
1,000
CURRENT IN AMPERES
.1
Current-Limitation Curves
AMPERE
B
RATING
400,000
INSTANTANEOUS PEAK LET-THROUGH
100,000
CURRENT IN AMPERES
.01
20
100
1,000
10,000
30,000
CURRENT IN AMPERES
60
30
10,000
15
1,000
200,000
100,000
10,000
1,000