Академический Документы
Профессиональный Документы
Культура Документы
When you are doing upgrade, there is always a small risk that something goes wrong and you
will lose this router, I mean it will fall out of management. To minimize such risk, you can
use the command in question.
<labnario>display startup
MainBoard:
Configured startup system software: cfcard:/v200r001c02spc300.cc
Startup system software: cfcard:/v200r001c02spc300.cc
Next startup system software: cfcard:/v200r002c00spc300.cc
Startup saved-configuration file: cfcard:/vrpcfg.cfg
Next startup saved-configuration file: cfcard:/vrpcfg.cfg
Startup paf file: default
Next startup paf file: default
Startup license file: default
Next startup license file: default
Startup patch package: cfcard:/v200r001sph005.pat
Next startup patch package: cfcard:/v200r002sph008.pat
SlaveBoard:
Configured startup system software: cfcard:/v200r001c02spc300.cc
Startup system software: cfcard:/v200r001c02spc300.cc
Next startup system software: cfcard:/v200r002c00spc300.cc
Startup saved-configuration file: cfcard:/vrpcfg.cfg
Next startup saved-configuration file: cfcard:/vrpcfg.cfg
Startup paf file: default
Next startup paf file: default
Startup license file: default
Next startup license file: default
Startup patch package: cfcard:/v200r001sph005.pat
Next startup patch package: cfcard:/v200r002sph008.pat
<labnario>reboot
By default, the version rollback function is disabled. Before restarting ATN 950B, during the
upgrade, you can run the upgrade rollback enable command to specify the period, from the
time when the system software is restarted to the time when ATN 950B performs the rollback.
During the specified period, if you dont telnet to ATN 950B or run the undo upgrade
rollback command, by connecting the PC to ATN 950B through the serial port, ATN 950B
will perform the rollback.
After the upgrade rollback enable command is run to enable the version rollback function for
ATN 950B, you can disable the function after telneting to ATN 950B:
As you can see, version rollback has been automatically disabled, after you had entered the
router by telnet.
If you log in to ATN 950B through a serial port, you need to run the undo upgrade rollback
command to disable the function. Otherwise, the router will perform the rollback.