Академический Документы
Профессиональный Документы
Культура Документы
Autograph
SHIMADZU UNIVERSAL TESTING INSTRUMENTS Series
"The quality of authentic products"
- becomes evident the more.
Shimadzu Autograph brings total ease of use with a comprehensive system that includes the testing
machine, jigs and software, based on the testing styles of our diverse users around the world.
These days testing styles have been rapidly changing and becoming more diversified, with an increas-
ing number of measurements and handling of various sizes of specimens required. The Autograph
AG-IS has been totally redesigned as a new system which satisfies all user requirements such as: "We
want to operate the testing machine at a 0.1mm pitch", "We want to efficiently carry out continuous test-
ing", "We want to use the machine with the utmost safety", and "We want enhanced efficiency by com-
bining the testing machine with a personal computer."
We promise that the new Autograph AG-IS is capable of satisfying all user needs. Please realize the
supreme quality of the highly renowned Shimadzu Universal Testing Instruments, which have
been the bestseller in the Japanese market since they were first launched in 1958.
Features
Controller with a high level of operability and safety
2
Series
3
By using the Smart Controller, basic operations such as starting and stopping the machine, can be easily per-
formed. Other operations that greatly influence the effectiveness of testing and operability, such as fine adjust-
ment of the jig position when setting the specimen and opening and closing of the air chuck, can also be easily
conducted at hand.
Color indicators and flashing
Test force and elongation display lights show the testing machine
This function is necessary for safety is in operation
checks. Test force and elongation can be
easily checked on the display in your The current state of the testing machine,
hands when setting the specimen, check- as well as the subsequent operations are
ing the initial test force, the position of the displayed by colors and lights for instanta-
crosshead, and setting micro test forces. neous safety check.
Manual dial
Testing machine monitor (PC display) The crosshead moves up and down in
It is also possible to check the operation response to turns of the dial. The intuitive
conditions and speed on the PC monitor. operation allows for minute adjustments
that are required when replacing the jigs,
mounting micro specimens, and applying
the initial force before starting the test.
Return switch
(with error prevention function) Options operation switches
The crosshead can be returned to its origi- The opening and closing of the air chuck
nal position. When the switch is pressed, and the operation of the automatic exten-
the direction of crosshead movement is dis- someter can be carried out.
played to prevent error before start.
4
Safety features
The testing machine stops automati-
cally when the change in the test
force exceeds a specified value dur-
ing manual operations such as sam- Controller
ple setting. (either can be chosen)
To carry out test conditions set-
tings and data processing using a
PC
Smart Controller for MS
Large space in the To carry out all operations using
working area the test machine main unit
Touch Panel Operation
The insides of column covers are
Unit for MO
planed off their it provides wide
space for the operator.
Saving space
The built-in control unit in the load-
ing frame saves floor space for the
machine.
5
TRAPEZIUM 2 (TRAPEZIUM 2 Single Software is included as standard.)
The Windows based TRAPEZIUM 2 software allows various testing operations from simple test control to complicated
control patterns created by the user. With its visual wizard settings and the industrys first operation navigation system,
data obtained from the test can be processed based on various standards.
Flexible operations such as re-testing and re-analysis, as well as many advanced functions, such as network transmission
of measurement data and screen customization, intelligently navigate various strength tests.
Japanese, English, Spanish, Chinese (both simplified and traditional) versions available. (Other languages available up
on request.)
Test starts
Automatic saving
Report printing
6
Visual and easy wizard system
Test parameters can be set easily by displaying the control pattern and data processing
items as images.
General items are already displayed. Desired User-defined data processing items can be easily
items can be selected by simply pressing the but- created using the User-defined formula
tons on the image. function.
7
Powerful sampling functions
6-channel input and display
Sampling intervals can be set by time, test force, or displacement
Test force automatic calibration function
Test force calibration can be conducted in one touch.
The highly functional built-in controller allows various control patterns.
Automatic test force and strain control
Control of the test force, such as keeping a constant test speed or test
force. Control of the strain, such as keeping a constant strain speed or
strain.
Break point detection
The specimen break point is automatically detected, upon which the testing
machine is automatically stopped or the crosshead is restored to its original
position.
Full auto test force range switching function
The test force range is automatically switched to always keep the optimal
range.
Specimen protection function
The load applied to the sample is automatically cancelled to prevent speci -
men damage before testing.
8
During the test, the state of the instrument is displayed on the monitor by colors and icons.
Set parameters such as the speed and break point can be checked at a glance.
For users conducting simple operations (only for the MO type) Analog recorder
There are two types of analog recorders: the XT-P for
TRAPEZIUM Lite (RS232C cable included)
creating the test force time/crosshead displacement
TRAPEZIUM Lite is recommended to cus-
curve and the XTY-P that also allows data input from
tomers who repeat the same tests using
the optional displacement gauge.
simple operations. TRAPEZIUM Lite
features automatic saving of test results
and a simple configuration, including for Model XT-P (AR-5422) XTY-P (AR-6422)
screens only (Test, Test parameters, Data Cat. No. 345-05842 345-05843
processing parameters and System).
9
The highly rigid frame assures long-lasting stability
The compact high-rigidity frame assures the detection of sudden changes to materials
and high-precision test force measurement.
10
The guaranteed test force measurement precision is
within 0.5% up to 1/500 of the load cell capacity *
Highly precise test force measurement is possible to conform to
world standards.
High-precision type: measuring precision within 0.5% of the specified test force
Conforms to the following standards
JIS B7721 Class 0.5, ISO7500/1 Class 0
EN 10002-2 Grade 0.5, BS 1610 Class 0.5
DIN 51221 Class 1, ASTM E4
Standard-precision type: measuring precision within 1% of the specified test force
Conforms to the following standards
JIS B7721 Class 1, ISO7500/1 Class 1
EN 10002-2 Grade 1, BS 1610 Class 1
DIN 51221 Class 1, ASTM E4
* Up to 1/250 of the load cell capacity for 250kN, 1N, 2N, and 5N load cells.
The 0.5% precision is guaranteed for 1kN to 250kN load cells. Load cells of capacity
below 1kN are not included in this precision guarantee.
11
The diverse lineup of accessories meets all user requirements.
Tensile tests
Combine grips and extensometers to the testing machine main unit to create a full array of testing methods.
Grips
Various types of grips are available depending on the type of specimen and the value of the test force.
Screw type flat grips <SCG> For Rubber Plastics Textiles Clothes Paper
Standard grip face Upper grip weight
Grip capacity Clearance Grip width Grip length Part No.
Grip face (kg)
(mm) (mm) (mm)
5kN 0~16 60 50 2 346-52326-04
File teeth
1kN 0~15 50 30 0.7 346-52327-04
50kN Flat 0~14 35 25 0.3 346-52328-04
Pneumatic flat grips <PFG> For Rubber Plastics Textiles Clothes Paper
Extensometers
The extensometers allow even more accurate measurement of elongation.
Strain gauge type one-touch extensometer Non-contact video extensometer DVE series
SSG-H series The DVE series extensometers assure a wide measuring
The SSG-H series extensometers conform to JIS B7741 range and high measuring precision by using two cameras.
Class 0.5 and JIS K7161 (SSG 50-10SH only). They can be GL50mm, maximum measuring range 30mm
fitted in one go. Absolute precision of indicated value 3 m
Model Gauge length (mm) Measuring range Part No. (JIS B7741 Class 1)
SSG25-50H 25 12.5, 6.25, 2.5, 1.24 346-52826-01 Relative precision 1%
SSG25-100H 25 25, 12.5, 5,2.5 346-52827-01 GL20mm, maximum measuring range 140mm
SSG50-10H 50 5, 2.5, 1, 0.5 346-52828-01 Absolute precision of indicated value 6 m
SSG50-10SH 50 5, 2.5, 1, 0.5 346-52828-21 (JIS B7741 Class 2)
The precision is JIS B7741 Class 0.5 or Class 1 depending on the conditions. Relative precision 1%
12
Compression test
Compression tests are possible by simply attaching the compression plate kit to the main unit.
The capacity and plate diameter can be selected depending on the type of the specimen.
Fixed type
Part No. 343-08224-29 343-08095 343-08224-17
Compression plate dimensions (mm) dia,X Thicness 50X25 100X25 200X40
Max. capacity 250kN
Upper plate weight (kg) 0.5 1.6 6.3
Temperature range () 0~40
With the spherical seat type, only the upper plate is spherical. The spherical seat
type compression plates provide contact flexibility for uniform load application.
Bending test
Bending tests are possible by simply attaching the bending test jig to the main unit. Various jigs are available
for various standards.
* For details of the test jigs that are not contained in this catalog, please refer to the separate accessories catalog.
Adhesion test
Adhesive tape peeling test device
The specimen table slides in accordance with the movement of the upper grip to maintain
the peeling angle at 90 degrees.
For Plastics Rubber
13
A variety of devices are available to test all types of specimens.
Grips Friction coefficient measuring devices Powder molding properties test devices
Adhesion test devices Plastic support strength test devices Environmental test devices
Shearing test devices Deep drawability test devices Displacement measuring devices
Burst test devices Devices to measure resistance when Test force measuring devices
Devices for needle insertion pulling out nails from lumber specimens Others
resistance measurement Lumber hardness test devices
Flow test devices Lumber cleavage test devices
Pneumatic automatic grips Pneumatic capstan type grips Spring tensile test jig Substrate 45-degree peeling
PWG series test jig
The air motor opens and closes the Specimens such as thread and cord The mechanical characteristics of Used for peeling tests of electronic
grips to shorten the time required for are held by the capstan. The initial tensile coil springs can be efficiently parts on a substrate.
testing. tensile force can be maintained. evaluated. Conforms to JIS B7738,
B2704, B2707 and B2708 standards.
Automatic extensometer Extensometer for soft materials Compression plate displace- Strain gauge type width sensor
MFN-A series SES-1000 ment measuring device
The MFN-A series extensometer Large elongation can be easily and Measures the displacement of the Measures the changes in the width
provides a wide measuring range accurately measured. compression plates during compres- of the specimen.
and high precision. sion tests.
JIS B7741 Class 1 accuracy guar-
anteed up to measuring range of
2mm. Accuracy within 1% of the indi-
cated value or within 0.05% of full
scale (whichever is the larger) for a
measuring range up to 500mm.
14
Jig for repeated bending Silicon chip (die) 3-point Long-span 4-point bending test PC card insertion and removal
tests of printed circuit board bending test jig device for wooden specimens test jig
This jig allows repeated bending Max. capacity 500N Capacity 100kN This jig allows for repeated insertion
tests of printed circuit board with Punch dimensions Tip R0.3 x 20mm Punch width 1320mm and removal of PC cards (memory
parts mounted. By combining this jig Support dimensions TipR0.3 x 20mm Punch distance 100 to 1350mm cards) and PC card adapters.
with the optional resistance meter, Span(Support dist.) 1 to 20mm Support width 1320mm
even more effective tests, such as Conforms to SEMI GXX-XXXX (Ex- Support distance 100 to 4000mm
detecting the internal damage and pected by xx/2002)
stopping the test, becomes possible.
Thermostatic chamber Bellow type long stroke Device for torsion test in Device for tensile test in
TCE series thermostatic chamber thermostatic chamber thermostatic chamber
The compact chamber enables test- Conforms to JIS K6263, ASTM D624 Temperature range -60 to +250 This is a special test device that
ing at a wide temperature range from and ISO 6914 standards. Torsion capacity 300N-m passes the crosshead through the
-70 to +280. Torsion speed 1 to 0.01rpm thermostatic chamber to assure a
long effective stroke.
15
Table-top type AG-IS specifications
Table-top type
1. Model name
AG-1NIS/2NIS/5NIS AG-10NIS/20NIS/50NIS AG-100NIS/500NIS AG-1kNIS AG-5kNIS
2. Capacity 1/2/5N 10/20/50N 100N/500N 1kN 5kN
3. Loading method Direct high-precision constant-rate strain control using non-backlash precision ball screw drive
Within 0.5% of displayed test force (for 1/1 to 1/500 of load cell rated capacity)
1/500 Not available Conforms to JIS B7721 class 0.5, JIS B7733 class 0.5, EN 10002-2 grade 0.5,
ISO 7500/1 class 0, BS1610 class 0.5, DIN 51221 class 1 and ASTM E4.
High-precision type
Within 0.5% of displayed test force (for 1/1 to 1/250 of load cell rated capacity)
1/250 Not available Conforms to JIS B7721 class 0.5, JIS B7733 class 0.5, EN 10002-2 grade 0.5,
ISO 7500/1 class 0, BS1610 class 0.5, DIN 51221 class 1 and ASTM E4.
Precision
Within 1% of displayed test force (for1/1 to 1/500 of load cell rated capacity)
4. Test force measurement 1/500 Not available Conforms to JIS B7721 class 1, JIS B7733 class 1, EN 10002-2 grade 1, ISO 7500/1 class 1,
BS1610 class 1, DIN 51221 class 1 and ASTM E4.
Standard-precision type
Within 1% of displayed test force (for 1/1 to 1/250 of load cell rated capacity)
1/250 Conforms to JIS B7721 class 1, JIS B7733 class 1, EN 10002-2 grade 1, ISO 7500/1 class 1, BS1610 class 1,
DIN 51221 class 1 and ASTM E4.
7. Crosshead speed and permissible 1/2/5N for all speeds 10/20/50N for all speeds 100/500N for all speeds 1kN for all speeds 5kN for all speeds
test force
8. Crosshead-table clearance Max. 1150mm Max. 1150mm Max. 1150mm Max. 1150mm Max. 1150mm
(tensile stroke) (*3) (850mm) (850mm) (840mm) (840mm) (780mm)
13. Ultrahigh-speed sampling function Sampling interval Max. 1.25msec. Normal sampling speed of 10msec.
Load cell For 1/2/5N For 10/20/50N For 100/500N For 1kN For 5kN
14. Accessories CAL. cable For 1/2/5N For 10/20/50N For 100/500N For 1kN For 5kN
Operation Unit 275 x 50 x 260 Fixed and removed at either the right or left side of the main unit (Model MO)
16
AG-10kNIS AG-20kNIST
10kN 20kN
Not available
Not available
Installation space (The dimensions for the left, right and back of the main unit are for maintenance.)
0.05500
Unit: mm
No settings Model MS
AG-1NIS to 10kNIS AG-20kNIST
550
600
600
0.5~500mm/min:20kN
10kN for all speeds
0.05~0.5mm/min:15kN
470
(600mm) (450mm)
510
(Front) (Front)
Model MO
AG-1NIS to 10kNIS AG-20kNIST
for model MS
Air chuck interlock unit (optional) operation
600
600
17
Table-top type AG-IS specifications
Floor type
1. Model name
AG-20kN IS AG-50kN IS AG-100kN IS AG-250kN IS
2. Capacity 20kN 50kN 100kN 250kN
3. Loading method Direct high-precision constant-rate strain control using non-backlash precision ball screw drive
Within 0.5% of displayed test force (for 1/1 to 1/500 of load cell rated capacity)
1/500 Conforms to JIS B7721 class 0.5, JIS B7733 class 0.5, EN 10002-2 grade 0.5, Not available
ISO 7500/1 class 0, BS1610 class 0.5, DIN 51221 class 1 and ASTM E4.
High-precision type
Within 0.5% of displayed test force (for 1/1 to 1/250 of load cell rated capacity)
1/250 Conforms to JIS B7721 class 0.5, JIS B7733 class 0.5, EN 10002-2 grade 0.5,
ISO 7500/1 class 0, BS1610 class 0.5, DIN 51221 class 1 and ASTM E4.
Precision
Within 1% of displayed test force (for 1/1 to 1/500 of load cell rated capacity)
4. Test force measurement 1/500 Conforms to JIS B7721 class 1, JIS B7733 class 1, EN 10002-2 grade 1, Not available
ISO 7500/1 class 1, BS1610 class 1, DIN 51221 class 1 and ASTM E4.
Standard-precision type
Within 1% of displayed test force (for 1/1 to 1/250 of load cell rated capacity)
1/250 Conforms to JIS B7721 class 1, JIS B7733 class 1, EN 10002-2 grade 1,
ISO 7500/1 class 1, BS1610 class 1, DIN 51221 class 1 and ASTM E4.
7. Crosshead speed and permissible 20kN for all speeds 50kN for all speeds 100kN for all speeds 250kN for all speeds
test force
8. Crosshead-table clearance Max. 1045mm Max. 1045mm Max. 1250mm Max. 1440mm
(tensile stroke) (*3) (640mm) (590mm) (760mm) (600mm)
13. Ultrahigh-speed sampling function Sampling interval Max. 1.25msec (when using TRAPEZIUM 2). Normal sampling speed from 10msec.
Load cell For 20kN For 50kN For 100kN For 250kN
14. Accessories CAL. cable For 20kN For 50kN For 100kN For 250kN
Main frame 1170 x 750 x 1912 1170 x 750 x 2162 1170 x 750 x 2412
16. Dimensions Measurement controller Housed in the main frame
(approx.)
W x D x H (mm) Smart Controller 80 x 50 x 250 Fixed and removed at the right of the main unit (Model MS)
Operation Unit 275 x 50 x 260 Fixed and removed at either the right or left side of the main unit (Model MO)
* The values in this catalog have been measured based on separately approved test standards.
18
Floor type (20kN, 50kN ) Model MS Floor type (100kN) Model MO
Installation space (The dimensions around the outside of the main unit are for maintenance.)
Model MS Model MO
600
750
750
500
500
4-M20 4-M20
LEVEL BOLTS 928 LEVEL BOLTS 928
600 1170 600 600 1170 600
Power requirement
Model name Weight (kg) with consumed power in () Installation site
AG-20kNIS Temp.: 5 to 40
500 Three phase200-230V 4kVA(1.2kVA)
AG-50kNIS Humidity: 20 to 80%(no condensation)
AG-100kNIS 800 Three phase200-230V 6.0kVA(1.6kVA) Voltage fluctuation: 10% max.
AG-250kNIS 900 Three phase200-230V 7.5kVA(2.0kVA) Vibration: Frequency 10Hz max, Amplitude 5 m max.
(NB) Grounding class D or above is required.
19
Extensions to the main unit
Wide-type series Large capacity series
Models with wider effective test width (975, 1100, and 1375mm) Models with the maximum capacity of 1000kN, 600kN, 500kN and
than the standard type (575mm) are also available for testing large- 300kN are also available for large-capacity testing conducted in
size actual object specimens. (Floor type only) heavy industry fields such as steel, construction and shipbuilding.
These are customized upon request.
Reinforced yoke series
Use this series when conducting tests between the crosshead and Extended column models
yoke. Models with extended columns (clearance between the yoke and
table extended by 250mm, 500mm, and 750mm) are also available.
Ultralow-speed crosshead model These are useful for testing with long tensile strokes.
The crosshead speed can be widened to an extremely low speed.
Ultralow-speed model
Speed range 0.00005 to 1000
(mm/min) (up to 500 with 250kN model)
Cat. No. 345-50522