Академический Документы
Профессиональный Документы
Культура Документы
DIL contactors
PKZ motor-protec-
tive circuit-breakers
MSC motor-starters
DS 4 softstarters
DF & DV Drives
Rapid Link
http://catalog.moeller.net Contents 1
Moeller NK2100-1171GB
DILMP contactors
Page
DILMP contactors
AC and DC contactor system xStart
Industry and trade expect clear progress in 4 pole DILMP contactor up to 200 A Ordering
electronics so that processes can be more - Identical frame sizes for AC and DC operated
efficiently designed - from planning via contactors simplify the engineering Basic devices up to 200 A 2
- Minimised heat dissipation allows a higher packing
engineering to mounting and installation. The density in the control panel Auxiliary contact modules 4
4 pole DILMP contactor fulfills these demands - Higher wiring safety due to double box terminals Suppressors 6
- Less intermediate relays because contactors up to
completely with its optimised dimensioning and 45 A can be directly actuated from the PLC
Accessories 7
innovations in termination and actuation. - Simple engineering due to integrated suppressors Actuating voltages 8
in the DC operated contactors
Engineering
Typical application areas of the DILMP contactor - Two-way mechanical interlock can be mounted
without extra distance between contactors
are: - Uniform accessories for 3 pole and 4 pole
Characteristic curves for DC switching 9
- Mains disconnection and mains changeover contactors Technical data 10
- Switching of heating systems Page 2
Dimensions 13
- 4 pole load switching
2 Ordering Ordering 3
Basic units up to 200 A Basic units up to 200 A
DILMP 4 pole Moeller NK2100-1171GB http://catalog.moeller.net http://catalog.moeller.net Moeller NK2100-1171GB DILMP 4 pole
AC operation DC operation
Rated operational current 50 – 60 Hz open Conventional Contact sequence Can be combined with auxiliary Part no. Price Part no. Price Std. pack Notes
thermal current contact Article no. see price Article no. see price
Ith = Ie AC-1 list list
AC-1 Open
40 °C 50 °C 60 °C Ith = Ie
A A A A
DILMP Contactors
DILMP Contactors
DILMP contactors
22 21 20 20 A1 1 3 5 7 DILM32-XHI(C)... DILMP20(230V50HZ) DILMP20(24VDC) 1 off
DILA-XHI(V)(C)... 276970 276985
A2 2 4 6 8
Connection technique Conventional Contacts Contact Can be Part no. Price Std. pack
thermal current sequence combined with Article no. see price
Ith = Ie basic unit list
AC-1 at 60 °C
Open N/O = Normally open,
Ith = Ie N/OE = Normally open (early make contact)
N/C = Normally closed
A N/CL = Normally closed (late break contact)
DILMP Contactors
16 – 2 N/C 51 61 DILA-XHI02
276420
52 62
16 – 4 N/C 51 61 71 81 DILA-XHI04
276424
52 62 72 82
DILMP Contactors
Auxiliary contact modules
With positively driven contacts; except XHIV and XHICV
Screw 2 pole 16 2 N/O – 13 23 DILMP63 DILM150-XHI20 5 off
terminals DILMP80 277945
14 24
DILMP125
16 1 N/O 1 N/C 13 21
DILMP160 DILM150-XHI11
DILMP200 277946
14 22
16 – 4 N/C 11 21 31 41 DILM150-XHI04
277952
12 22 32 42
10 1 N/OE 1 N/CL 17
48
25
36
DILMP160 DILM1000-XHIV11-SI
47 35
DILMP200 278426
18 26
10 1 N/O 1 N/C 53
84
61
72
DILM1000-XHI11-SA
83 71
278427
54 62
6 Ordering
Suppressors
DILM...-XSP Moeller NK2100-1171GB http://catalog.moeller.net
Voltage For use with Contact sequence Part no. Price Std. pack Notes
Us Article no. see price
list
V
Suppressors
RC suppressors
DILMP Contactors
Links
DILMP20 – DILMP80 DILM32-XVB 50 off For mechanically arranging contactors in
DILMP Contactors
281227 combinations. Distance between contactors 0 mm
Mechanical interlocks
DILMP20 DILM12-XMV 1 off For two contactors with AC or DC operation arranged
281196 vertically or horizontally
Distance between contactors 0 mm, including
contactor connector
DILMP32 – DILMP45 DILM32-XMV Mechanical lifespan 2.5 x 106 operations.
281197 Additional auxiliary contact module possible
a page 4.
DILMP63 – DILMP80 DILM65-XMV DILM150-XMV comes with mounting plate for
281198 contactors.
DILMP125 – DILMP200 DILM150-XMV
240081
Article no.1) Article no.1) Article no.1) Article no.1) Article no.1) Article no.1) Article no.1) Article no.1)
Standard voltages Price Price Price Price Price Price Price Price
see price list see price list see price list see price list see price list see price list see price list see price list
DILMP Contactors
Standard voltages Price Price Price Price Price Price Price Price
see price list see price list see price list see price list see price list see price list see price list see price list
Non-standard voltages 2) Price Price Price Price Price Price Price Price
see price list see price list see price list see price list see price list see price list see price list see price list
Standard voltages Price Price Price Price Price Price Price Price
see price list see price list see price list see price list see price list see price list see price list see price list
24V DC 276985 – – – – – – –
RDC 247) – 109811 109840 109869 109898 109910 109920 109930
DC Article no.1) Article no.1) Article no.1) Article no.1) Article no.1) Article no.1) Article no.1) Article no.1)
Non-standard voltages 2) Price Price Price Price Price Price Price Price
see price list see price list see price list see price list see price list see price list see price list see price list
Notes 1) The article number is a combination of part no. and operating voltage
2) For non-standard voltages, state the actuating voltage selected from the range (…–…V) shown.
3) Minimum order quantity: 10 off
4) 24 V 50/60 Hz
5) 100 – 120 V 50/60 Hz
6) 190 – 240 V 50/60 Hz
7) 24 – 27 V DC
Engineering 9
Characteristic curves for DC switching
http://catalog.moeller.net Moeller NK2100-1171GB DILMP20 ... DILMP200
Switching conditions for 4 pole, non-motor loads
AC-1/400 V
Breaking current A
Operating characteristics
Non inductive and slightly inductive loads
200 DILMP200
Electrical characteristics:
DILMP Contactors
Switch on: 1 ⫻ Rated current
Switch off: 1 ⫻ Rated current
160 DILMP160 Utilization category
100 % AC-1
Typical applications:
125 DILMP125 Electric heat
80 DILMP80
63 DILMP63
45 DILMP45
32 DILMP32
22 DILMP22
Switching of DC currents
1 pole
2 pole
10 Technical Data
Contactors
DILMP20 … DILMP200 Moeller NK2100-1171GB http://catalog.moeller.net
General
Standards IEC/EN 60947, VDE 0660, UL, CSA
Lifespan, mechanical
DILMP Contactors
90
30˚ 30˚
90
°
180°
DILMP Contactors
Rated insulation voltage Ui V AC 690
Rated operational voltage Ue V AC 690
Safe isolation to EN 61140
between coil and contacts V AC 400 440
between the contacts V AC 400 440
Making capacity (cos v to IEC/EN 60947) Up to 690 V A 144 238 350 560 700 1120 1330 1800
Breaking capacity
220/230 V A 120 180 250 400 500 800 950 1150
380/400 V A 120 180 250 400 500 800 950 1150
500 V A 100 180 250 400 500 800 950 1150
660/690 V A 70 120 144 250 296 650 750 800
Short-circuit rating
Short-circuit protection maximum fuse
Type “2” coordination
400 V gG/gL 500 V A 20 35 35 63 80 160 160 250
690 V gG/gL 690 V A 20 35 35 50 63 160 160 200
Type “1” coordination
400 V gG/gL 500 V A 35 63 100 125 160 250 250 250
690 V gG/gL 690 V A 25 50 50 80 80 200 200 200
AC
AC-1 duty
conv. therm. current 3 pole 50 – 60 Hz
open
at 40 °C Ith A 22 32 45 63 80 125 160 200
at 50 °C Ith A 21 30 41 60 76 116 150 188
at 60 °C Ith A 20 28 39 54 69 108 138 172
enclosed Ith A 18 27 36 50 64 100 128 160
Conventional free air thermal current, 1 pole
open Ith A 60 84 117 162 207 325 415 516
enclosed Ith A 54 76 105 146 186 292 373 464
Motor rating
AC-1 230 V kW 8 12 16 23 29 45 58 72
AC-1 240 V kW 9 13 18 25 32 49 63 79
AC-1 380/400 V kW 14 20 28 39 50 78 100 125
AC-1 415 V kW 15 22 31 43 55 85 109 137
AC-1 440 V kW 16 23 33 46 58 90 116 145
AC-1 500 V kW 18 26 37 52 66 103 132 165
AC-1 690 V kW 24 35 49 68 87 136 174 217
AC-3 duty
Rated operational current AC-3 open, 50 – 60 Hz, 3 pole
220/230 V Ie A 12 18 25 40 50 80 95 115
240 V Ie A 12 18 25 40 50 80 95 115
380/400 V Ie A 12 18 25 40 50 80 95 115
415 V Ie A 12 18 25 40 50 80 95 115
440 V Ie A 12 18 25 40 50 80 95 115
500 V Ie A 10 18 25 40 50 80 95 115
660/690 V Ie A 7 12 15 25 32 65 80 93
Motor rating
220/230 V P kW 3.5 5 7.5 12.5 15.5 25 30 37
240V P kW 4 5.5 8.5 13.5 17 27.5 33 40
380/400 V P kW 5.5 7.5 11 18.5 22 37 45 55
415 V P kW 7 10 14.5 24 30 48 57 70
440 V P kW 7.5 10.5 15.5 25 32 51 60 75
500 V P kW 7 12 17.5 28 36 58 70 85
660/690 V P kW 6.5 11 14 23 30 63 75 90
12 Technical Data
Contactors
DILMP20 … DILMP200 Moeller NK2100-1171GB http://catalog.moeller.net
DC
Rated operational current, open
DC-1 operation
DILMP Contactors
2 x M4
60
18
45
68
DILMP Contactors
36 3.2 35
45 6.5
75
117
DILMP32
DILMP45
2 x M4
75
60.4
71
38
85
35
58 4.5
6.5
distance at side to earthed parts: 6 mm
97.4
138
Contactors
DILMP63
DILMP80
2 x M4
105
86.4
104
115
57
74 4.7 45
85 6.9 distance at side to earthed parts: 6 mm
114
132.1
147
DILMP125
DILMP160
DILMP200
4 x M6
170
156
156
57
122 82.5
133 85.5 70
142 distance at side to earthed parts: 10 mm
160
175
Moeller addresses worldwide:
www.moeller.net/address
E-Mail: info@moeller.net
Internet: www.moeller.net
Xtra Combinations
It provides:
■ Flexibility and simplicity
■ Great system availability
■ The highest level of safety