Академический Документы
Профессиональный Документы
Культура Документы
charger unit
REPLACEMENT INSTRUCTIONS
2004.10
Ver. 1.0
1050/1050P transfer/separation charger unit replacement instructions
(1) Purpose
To return to the normal operation as soon as possible when a decrease in the transfer or separation perfor-
mance is found due to the deterioration of the transfer/separation charger unit.
Sub
power
switch
1050fs5012z
Caution:
When conducting the replacement opera-
tions, be sure to turn OFF the main power
switch and the sub power switch and then
unplug the power cord from the wall outlet.
1050fs2001y
1
1050/1050P transfer/separation charger unit replacement instructions
1050fs2019c
2
1050/1050P transfer/separation charger unit replacement instructions
NOTE
When the transfer/separation charger unit is
equipped with a transfer assist sheet other
than the standard part, be sure to replace also
the connector [2].
The guide plate has been adjusted in high
precision before being assembled. So, when
removing the transfer/separation charger, be
sure to avoid holding the guide plate to pull it
up but hold the blocks provided at both sides.
Transfer
/separation unit 7. Loosen the 2 screws and remove the transfer/
separation unit.
8. When installing a new replacement part, see "(3)
Procedure for reinstallation" (on the next page).
Block Screw
Connector [1] Connector [2] 1050fs2020c
3
1050/1050P transfer/separation charger unit replacement instructions
NOTE
When the transfer/separation charger unit is
equipped with a transfer assist sheet other
than the standard part, be sure to replace also
the connector [2].
Transfer
/separation unit
Screw
Connector [1] Connector [2] 1050fs2020z
1050fs2019z
4
1050/1050P transfer/separation charger unit replacement instructions
NOTE
When the ADU is brought back to its original
position, be sure to lock the pull-out lever.
1050fs2001x
Sub
power
switch
1050fs5012z
5
1050/1050P transfer/separation charger unit replacement instructions
Blank page