Академический Документы
Профессиональный Документы
Культура Документы
AUTOMOBILE TECHNOLOGY
1. Preparation 100
2. Repair engine to start and run 200
Diagnosis Engine Control System by Scan Tool and jumper
3. 250
cable
4. Checks and measure EFI Components 200
5. Use of the exhaust gas analyser 250
Task Total 1000
LKS Tingkat Provinsi Jawa Barat Bidang Lomba Automobile Technology -Cibinong 2017 1
LOMBA KETERAMPILAN SISWA
SEKOLAH MENENGAH KEJURUAN
TINGKAT PROVINSI JAWA BARAT
TAHUN 2017
ATTENTION
This Vehicle ( Toyota Avanza) on problem condition (Engine can not run).
1. Found this problem and repair so engine can to run.
After engine can to run , found problem on Engine Control System by scan tool
2. and read engine check lamp blinking.
You may use tools and equipment you have, and is provide for you to diagnose
3. and repair problems found.
Ask the judge for repair-parts needed and show him what you have found.
4.
Check the exhaust emission using the Emission Analyzer and record your
7. findings.
LKS Tingkat Provinsi Jawa Barat Bidang Lomba Automobile Technology -Cibinong 2017 2
LOMBA KETERAMPILAN SISWA
SEKOLAH MENENGAH KEJURUAN
TINGKAT PROVINSI JAWA BARAT
TAHUN 2017
Performance
No Items Components
Good Bad
1. Fuel Injector Inspection
Resistance Injector __________ Ohm
2. Throttle Position Sensor
Terminal 1 - 2 __________ Ohm
Terminal 3 - 2 __________ Ohm
3. Water Temp Sensor / 20C __________ Ohm
4. Camshaft Sensor __________ Ohm
5. Crankshaft Sensor __________ Ohm
6. Knock Sensor __________ Ohm
7. Reading Current Data
Intake Air Temperature ___________C
Coolant Temperature ___________C
9. Exhaust Emission Test
Idling Speed
CO reading ________________ %
CO2 reading ________________ %
Lamda reading ________________
HC reading ________________ ppm
10. At 2,500 rpm
CO reading ________________ %
CO2 reading ________________ %
Lamda reading ________________
HC reading ________________ ppm
LKS Tingkat Provinsi Jawa Barat Bidang Lomba Automobile Technology -Cibinong 2017 3