Академический Документы
Профессиональный Документы
Культура Документы
WMD3K2
WMD3K2 multi digital
desoldering station
with soldering irons
WD1000AU
WD1 digital soldering station with
WP80 soldering iron
e - denotes USA/Germany stock requiring freight lead times. 2
Product depictions are not to scale. “Broken shelf packs attract a 5% Surcharge”
SOLDERING STATIONS
WHS40D T0056828599 1
Soldering Station - 40W/230V - Digital
• 2mm straight nickel tip
• The new electronically controlled
soldering station WHS40D operates
with a temperature range of 150°C -
450°C.
• The precise soldering tip temperature
shows on the digital read-out (pre-set
and real value).
• This soldering station is suitable for
delicate soldering tasks on temperature
sensitive components.
• LED to monitor the heater is integrated
in the display.
• The temperature adjusts via buttons.
• Consists of power unit, soldering iron
with “Longlife” tip 2.0mm and support.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 3
SOLDERING STATIONS
WESD51DAU WESD51DAU 1
Ideal for production, rework and repair of
through hole SMT boards, some ground
planes and multi-layer boards.
• Digital microprocessor temperature control
with LED display ESD SAFE
WD1AU WD1AU 1
80W Power Unit with Digital Display - Single
port
• 3 “radio buttons” allows to pre-set
frequently used temperature settings
• Extensive Special Functions menu ESD SAFE
allows you to utilize access features
• Setback, lockout, temp. window, F/C
switching, standby, auto-off time
• Large high contrast LCD display
displays more information at a glance
• Compatible with WP80 and WMP
soldering pencils
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant
WD1MAU WD1MAU 1
80W High Performance Power Unit - Single
port
• 3 “radio buttons” allows to pre-set
frequently used temperature settings
• Extensive Special Functions menu
allows you to utilize access features ESD SAFE
4 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
SOLDERING STATIONS
WD1000AU WD1000AU 1
A new concept in soldering iron design.
• Digital temperature control
• Temperature lockout
• Automatic shut off
• Unique miniature pencil ESD SAFE
WD1001AU WD1001AU 1
• Similar to WD1000AU with WMP
soldering tool and WDH20 holder.
ESD SAFE
WD1000MAU WD1000MAU 1
Micro Digital Rework Soldering Station,
• Designed for fine pitch, high density
SMT soldering and rework
• 3 “radio buttons” allows pre-set of
frequently used temp settings
• Setback, lockout, temp. window, F/C ESD SAFE
switching, standby, auto-off time
• Large high contrast LCD display
displays more information at a glance
• The heating element is contained in the
tip for fast heat-up
• WMRP Pencil is made of aluminum
with chrome plating and weighs just 75g
• The pencil powers down when placed
in the holder to extend tip life
• The “tip to grip” distance is 45mm,
placing you close to the work
• The antistatic design of the safety rest
has got four different settings
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant
• Max. Power Output 80W; Consists of
WMRP 40W Micro Soldering Pencils
with RT3 Tip and WDH50 Holder
WD1000HPT WD1000HPTAU 1
W The WD 1000HPT station features Weller’s
NE new 120 W soldering iron, the WP 120. This
iron is ideal for soldering on difficult circuit
boards with heat sinks that cause dissipation
in heat transfer. Target applications include
high density circuit boards, High Frequency / ESD SAFE
Radio Frequency applications, and solar panel
production.
The Weller WD1000HPT station is specifically
designed for soldering operations which need
a combination of high energy and maximum
precision.
The WD1000 HPT consists of-
• The WD120 Soldering Iron
XT Series Tips, refer page 29
• The WD1M Power Unit
• WDH10T Stop + Go Iron Safety Rest
• Dimensions (L x W x H mm):
134 x 108 x 147
• Mains voltage supply: 230V / 120V /
50/60 Hz
• Power: 160W
• Safety class: I (power unit),
III (soldering iron)
• Temperature control: 50°C - 450°C
• Temperature accuracy: ± 9°C
• Temperature stability: ± 5°C
• Soldering tip leakage resistance:
< 2 Ω (tip-to-ground)
• Soldering tip leakage current:
< 2 mV (tip-to-ground)
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 5
SOLDERING STATIONS
WD2MAU WD2MAU 1
160W Power Unit with Digital Display
- 2 Port
• 3 “radio buttons” allows to pre-set
frequently used temperature settings
• Extensive Special Functions menu ESD SAFE
WD2000AU WD2000AU 1
Dual Channel Digital Soldering Station
• Mircroprocessor-controlled soldering
station in a modern ergonomic design
for Weller soldering tools up to 150 W
• Temperature control 50°C-450°C ESD SAFE
(150°C-550°C with WSP 150)
• Big LCD display
• Three fixed temperatures can be
assigned with the temperature buttons
• The following settings are possible
without any accessory unit: custom-
designed calibration function,
programmable temperature decrease
(setback), interlock functions and
remote ID for ISO applications
• The antistatic design of the safety rest
has got four different setting
• Protection class I (controll unit),
protection class III (soldering iron)
• Max. Power Output 160W; RoHS &
WEEE Compliant; consists of 2 x WP80
80W Soldering Pencil with LTB Tips,
2 x WDH10 Stand
WD2001AU WD2001AU 1
Dual Channel Digital Soldering Station
• Mircroprocessor-controlled soldering
station in a modern ergonomic design
for Weller soldering tools up to 150 W
• Temperature control 50°C-450°C ESD SAFE
(150°C-550°C with WSP 150)
• Big LCD display
• Three fixed temperatures can be
assigned with the temperature buttons
• The following settings are possible
without any accessory unit: custom-
designed calibration function,
programmable temperature decrease
(setback), interlock functions and
remote ID for ISO applications
• The antistatic design of the safety rest
has got four different settings
• Protection class I (controll unit),
protection class III (soldering iron)
• Output 160W; RoHS & WEEE
Compliant; consists of 1 x WP80 80W
Soldering Pencil with LTB Tip & WDH10
Holder, 2 x WMP 65W Soldering
Pencils with Tips & 2 x WDH20 Stands
6 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
SOLDERING STATIONS
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 7
SOLDERING
WD 3000HPT Soldering Station 420STATIONS
W
New
function
Protection class: I
• WMRT Micro Tweezers, 80W 10.75 xx40W)
9.25 x 4.02 inches
(2 50°C
Temperature control: – 450°C (150°F – 850°F)
Mains voltage:
• WMRTH Safety Rest with Stop230 V+/ Go50/60 Hz; 120 V / 50/60 Hz
Temperature accuracy: ± 9°C (± 17°F)
Power input:
function max. 420 W
Temperature stability: ± 5°C (± 9°F)
New
Protection class: Data:
Technical I
Tip-to-ground resistance: <2Ω
• Dimensions
Temperature control: (L x W x H): 237 x 235
50°C x (150°F – 850°F)
– 450°C
102mm,
Temperature 10.75 x 9.25 x 4.02
accuracy: ± inches
9°C (± 17°F)
Potential-free plug (factory set hard grounded)
• Mains
Temperature voltage: 230V / 50/60
stability: Hz (± 9°F)
± 5°C
• Powerresistance:
Tip-to-ground input: max. 420W < 2 Ω
• Protection class: 1
WD 3002HPT Soldering Station 420 W • Temperature
Potential-free control:set
plug (factory 50°C-450°C
hard grounded)
(150°F-850°F)
• Temperature accuracy: ± 9°C (± 17°F)
One station, two High-Power Soldering Pencils for WD 3002HPT Soldering
• Temperature stability:Station
± 5°C (± 9°F)
WDdifferent
3002HPT Soldering
applications Station
or parallel work. 420 W Order-No. 230 V: resistance: < 2 Ω
• Tip-to-ground 005 33 746 99
Three channels with High-Speed-Regulation for all Order-No. 120 V:plug (factory set hard grounded) WD3002HPT
Potential-free
Micro-Tools and High-Power Soldering Pencil WP 120.
One station, two High-Power Soldering Pencils for WD 3002HPT Soldering Station
Scope of supply:
different applications or parallel work. Order-No. 230 V:
WD3002HPT 005 33 746 99WD3002HPTAU 1
Three channels with High-Speed-Regulation for all Order-No. 120 V: Soldering Station 420W, 230V WD3002HPT
WDWD3002HPT
3M Power Unit
Micro-Tools and High-Power Soldering Pencil WP 120.
WPOne
120station, two High-Power Soldering
High-Power Pencils
Soldering Pencil, 120 W 2x
W Scope of
forsupply:
different applications or parallel
Rest withwork.
NE
WDH 10T Safety Stop + Go function 2x
Three channels with High-Speed-Regulation
WD 3M for all Micro-ToolsPower
and High-Power
Unit Soldering
WP 120Pencil WP 120. High-Power Soldering Pencil, 120 W 2x
Includes:
WDH 10T Safety Rest with Stop + Go function 2x
• WD 3M Power Unit
• WP120 High-Power Soldering Pencil,
120W 2x
• WDH 10T Safety Rest with Stop + Go
function 2x
New 9
8 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
ACCESSORIES
HAP200
DS80UNC
TC201B
Station
WHPS80
WSB150
WSP150
WSP80
WST82
WP120
WTA50
DSX80
PRS50
WMRP
PES51
WMRT
TC201
WP80
WMP
WTCPT t
WTCPTD t
WES50D t
WES51D t
WESD51D t
WSD81 t t t t t t t t
WSL t t t t t t t t
WSD151 t t t t t t t t t t
WSD161 t t t t t t t t t t
WMRS t t t t t t t t t t
WD1000AU t t t t t t t t
WD1001AU t t t t t t t t
WD2000AU t t t t t t t t t
WD2001AU t t t t t t t t t
WD2002AU t t t t t t t t t t
WD1000MAU t t t t t t t t t t t
WD2000MAU t t t t t t t t t t t
WD1AU t t t t t t t t t
WD2AU t t t t t t t t t t t
WD1MAU t t t t t t t t t t t
WD2MAU t t t t t t t t t t t t t
WD3MAU t
WMD1 t t t t t t t t t t t t
WMD1A t t t t t t t t t t t t
WMD1D t t t t t t t t t t t t
WMD3 t t t t t t t t t t t t t t
WMD3K2 t t t t t t t t t t t t t t
WR3M t t t t t t t t t t t t t t t t t t
WR3000M t t t t t t t t t t t t t t t t t t
Optional Accessories
www.weller.eu April 29, 2008
Description Material No. Shelf
Pack
NEW: WD 1000HPT WP80 80 Watt Soldering Pencil with Short T0052918099 1
Tip-To-Grip
• Compatible with WD1 and WD2
Soldering Stations, and WRS Rework
Stations
The New Generation • New WP80 offers 80 watts of power
with short tip-to-grip (40 mm)
of High Power Tools • New WP80 has same performance
characteristics as the WSP80
• Perfect for Lead Free solder
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant
• See page 26 for LT tips, Accessories
and Spares
• Spare element NOT available
www.weller.eu (sealed to handle) April 29, 2008
NEW: WD 1000HPT
Weller Info No. 15 ®
WP80 Set T0052918199 1
• Consists of:
• WP80 soldering pencil
• WDH10 support
• ROHS & WEEE Compliant
The New Generation • See page 26 for LT Tips
of High Power Tools The WD 1000HPT station features Weller®'s new 120 W High
Power Tool, our new
WP80 WP for
Barrel 120 soldering
WP80 Pencil iron. This iron is ideal for
T005874484 1
soldering on challenging circuit boards with heat sinks and big
soldering joints that cause large dissipation in heat transfer.
The Weller® WD 1000HPT station is specifically designed for your
soldering operations which need a combination of high energy
WP120 Soldering Iron T0052919399 1
and maximum• Twice
precision.
as much power and efficiency
W in a small and ergonomic pencil
NE
Weller Info No. 15 ® design
• Powerful heating element with a
The WD 1000HPT comprises
replaceable soldering- tip
The WP 120 Soldering Iron
• Best life cycle cost at dynamic
The new WP 120 performance
High Power Tool offers twice as much power and
• The rapid transfer of heat into the
The WD 1000HPTefficiency station small
in a features and
soldering tip ergonomic
Weller ®
's new
is quickly and120pencil
W High
precisely design. Combining a
Power Tool, compact,
our new powerful
WP 120 heating
controlled with element
soldering Thiswith
sophisticated
iron. aisreplaceable
electronics
iron ideal for soldering tip
soldering on thechallenging
WP 120 guarantees• Designboards
circuit copesbestwith
with bigheat
life and difficult
cycle cost
sinks andat dynamic
big performance.
solder joints even at barely
soldering joints
The that cause
rapid transfer large dissipation
of heat
accessible into the
joints in soldering
heat transfer.tip is quickly and precisely
®
WD 1000HPT
The Wellercontrolled with•station is for
specifically
sophisticated
Also ideal designed
electronics
HF shield plates for your
which
or solar allows the WP 120's
soldering operations whichpanel need a combination of high energy
manufacturing
compact design to cope with big and difficult solder joints even at
and maximum precision.
barely accessible WP120 SetAlso ideal for HF shield plates or
joints. solar
T0052919499 1
W
NE
panel manufacturing. • Consists of:
• WP120 soldering pencil
The WD 1000HPT comprises -
• WDH10T Stop + Go Stand
The WP 120 Soldering Iron• ROHS & WEEE Compliant
The new WP The120WD High1M Power
Power Tool
• See offers
Unit
page 29 fortwice
XT tips as much power and
efficiency inOura small
well and ergonomic
established pencil design. Combining
microprocessor controlledaWD 1M has a number
compact, powerful heating element with a replaceable soldering tip
of in built special functions as preset temperatures, individual settings
the WP 120 guarantees best life cycle cost at dynamic performance.
WDH10T for setback,
The rapid transfer of heatUSB connectivity,
into the soldering tipwhich make
is quickly and itprecisely
ideally suited for use in
controlled production, rework
with sophisticated and laboratory
electronics which allows environments.
the WP 120's
compact designFromtonow copeon webigequip
with all WDsolder
and difficult 1Ms'joints
additionally
even at with new advanced
software
barely accessible specially
joints. Also ideal designed for thisplates
for HF shield new WP 120 High Power Tool.
or solar
Note: Some of the above items may require a freight leadpanel manufacturing.
time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 9
ACCESSORIES
10 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
ACCESSORIES
EW
80 Watt Desoldering Pencil
N • Temperature range 50°C-450°C
• RPHS & WEEE Compliant
See page 33 for DX tips
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 11
ACCESSORIES
WSB80 T0052704099 1
80 Watt Solder Bath is a very useful
rework preparation tool. The solder bath is
temperature controlled continuously between
50°C to 450°C via an existing 80W power
source (WSD81, WMD series). The solder bath
can be used to tin wire ends and leads of all
extraneous solder particles in preparation for
reworking.
• 150x120x65mm
• Warm up time (approx) 7 minutes
• ROHS & WEEE Compliant
WSB150 T0052704299 1
150 Watt Solder Bath. Accessory for WD2, and
WD2M Power Units.
• For tin coating and preparation of
electronics components and leads
• Also used to clean excess solder from
component leads
• Compatible with lead free solders
12 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
ACCESSORIES
Tool Stands
PH1201 Tool Stand for TCP, TC, EC and SP PH1201 1
WDH20
WDH20 Support for WMP T0051512299 1
with four different settings
WDH10
WDH50
WDH20T WMP Stop-N-Go T0051516299 1
AK20
WMRTH
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 13
ACCESSORIES
PH12100
WDH10T
WDH20T
PH1201
PH1260
WDH10
WDH20
WDH30
WDH40
WDH50
Tools
AK20
AK51
PH50
AKV
TCP
TC
EC
SP
EC1302B
PES50
PES51
WSP80
WSP150
WP80
WMP
WMRP
WMRT
WVP
WTA-50
HAP1
HAP200
DS80UNC /DSV
DSX80
W60D
W100D
Soldering Aids
W101CH Miniature temperature controlled W101CH 1
solder bath (330°C) with horizontal stand.
100W 230V Consists of:
• 100W Solder Bath with Insert
• Support for Solder Bath
ESF-120ESD T0051502699 1
Printed circuit board holder
• Adjustable to Eurocard size
• Suitable for holding irregular shaped cards
• Component support
WPBI Polishing Bar WPBI 1
• Rejuvenates tips without damage to the
plated surface
De-Soldering Pump
WDS De-Soldering Pump WDS Refer Hardware
• High Suction Power, Lightweight Cat.
• Ideal for PC Board Repairing
• Clean the cylinder occasionally
14 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
ACCESSORIES & PORTABLE SOLDERING TOOLS
WCB2 T0053118099 1
As for WCB1 with the following additional
features:
• Thermo couple input for automatic
calibration.
• RS232 output
BP860MPA BP860MPA 5
Dual Heat Battery Powered Cordless Soldering
Iron
• Perfect tool for light duty soldering jobs
where portability is necessary
• Solders up to 180 solder joints per
battery charge
• Medium Duty - 8 to 11 Watts
• Dual Heat gives two different working
tempeatures - 450°C and 500°C
BP10
BP10 Conical Tip
BP11 Chisel Tip BP11
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 15
PORTABLE & BUTANE POWERED SOLDERING IRONS
Weller® Pyropen
WPA2 WPA2 1
Piezo ignition (self) lighting.
Kit includes:
• 1 x WPT-2 soldering tip
• 1 x WHC-52 hot blow tip
• Metal kit box
See page 32 for tip selection
WSTA3 WSTA3 1
Soldering, hot blow and torch flame facilities.
kit includes:
• 1 x soldering tip
• 1 x hot blow tip
• torch ejector tightening bar
• Metal Kit box
See page 32 for tip selection
WSTA6 WSTA6 1
Junior pocket size with auto ignition
• Fitted with pocket clip
• Suitable for soldering and hot blow
applications
• 1 x WPT-01 tip
See page 31 for tip selection
WSTA5 WSTA5 1
Jumbo, (self igniting)
Kit includes:
• Soldering Tip 72-01-02
• Hot Blow Tip 72-01-52
• Metal kit box
See page 31 for tip selection
Weller® Portasol
PSI100K PSI100K 1
Piezo ignition (self lighting).
Kit includes
• 1 x soldering, hot blow and cutting tip
• Torch flame facility
Tips Include:
• PSI - 6. PSI - 8, PSI - 9, PSI - 10
See page 32 for Portasol tip selection
BR200 BR200 12
Weller Butane Gas refill, 200 grams.
Suitable for all above irons.
16 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
REWORK STATIONS
Repair/Rework Stations
All Weller repair and rework stations feature automatic tool recognition and will accept any Weller temtronic tool including the WTA50, desoldering
tweezers, WSB80 and WSB150 solder baths and WST20 thermal strippers. These stations have a built in pump to supply vacuum for desoldering and
air for hot air soldering and desoldering. Special desoldering heads for SMD components removal are available. A finger switch control on
the desoldering tool handle and hot air pencil will operate the air pump. SMD components can be lifted off with the vacuum of the desolder head.
The hot air pencil (HAP1) is used for reflowing with solder paste or desoldering. Smaller components can be removed with the standard nozzle. Larger components can
be desoldered with a suitable nozzle.
WMD1D T0053333599 1
A multipurpose station to handle all rework
and repair requirements.
• Digital microprocessor provides
complete accuracy and reliability
• Self contained air & vacuum
• Programmable temperature, hot air flow
and automatic set-back
• Operator lock out prevents
unauthorised changes ESD SAFE
• Temperature range, hot air 50°C-550°C,
solder and desolder 50°C-450°C
• Idle temperature set-back, 5-60
minutes
• Large range of optional tools
• Made in Germany
Station consists of:
• WMD1S Power uni
• DSX80 desoldering tool
• ROHS & WEEE Compliant
WMD1A T0053330699 1
A multipurpose station to handle all rework
and repair requirements.
• Digital microprocessor provides
complete accuracy and reliability
• Self contained air & vacuum
• Programmable temperature, hot air flow
and automatic set-back
• Operator lock out prevents
unauthorised changes
• Temperature range, hot air 50°C-550°C, ESD SAFE
solder and desolder 50°C-450°C
• Idle temperature set-back, 5-60
minutes
• Large range of optional tools
• Made in Germany
Station consists of:
• WMD1S Power unit
• HAP1 hot air pencil
• ROHS & WEEE Compliant
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 17
REWORK STATIONS & HOT AIR STATIONS
Repair/Rework Stations
Description Material No. Shelf
Pack
WR3M T0053366699 1
Package includes:
• WR 3M repair station
• Adapter for HAP200 hot-air pencil
• CD with USB software
• USB cable
Technical data:
• Dimensions L x W x H (mm):
237 x 235 x 102
• Weight: approx. 6.7 kg
• Mains supply voltage: 230 V, 50 Hz ESD SAFE
(120 V, 60 Hz)
• Power consumption: 420 W
• Safety class: I and III, housing antistatic
• Fuse: Overcurrent release 2 A (4 A)
• Temperature control Soldering and
Desoldering iron stepless of channels:
50°C-550°C
• Controllable temperature range is tool-
dependent
• Temperature accuracy: ± 9°C
• Temperature stability: ± 2°C
• Pump (periodic duty (30/30) s): Max.
vacuum 0.7 bar
• Max. delivery rate 18 l/min
• Hot air max. 15 l/min
• Additional Pump: Max. vacuum 0.5 bar
• Max. delivery rate 1.7 l/min
• Equipotential bonding: Via 3.5 mm pawl
socket on back of device
WR3000MAU WR3000MAU 1
Rework Set
Package includes:
• WR3M
• HAP200 Hot-air pencil with WDH30
Safety rest
• DSX80 Desoldering iron with WDH30
Safety rest
• WP80 Soldering iron with WDH10 Stop
+ go Safety rest
• WVP Vacuum pick up ESD SAFE
18 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
HOT AIR STATIONS
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 19
HOT AIR STATIONS
WBH T0053316499 1
PCB Holder
• Holds circuit boards up to 310 x 320
mm in the x-y direction
• The WHP3000 heating plate can be slid
under the PCB holder
• Same as WBH3000S but without
pivoting hot air tool holder
WHA900 T0053171699 1
Hot air station 700W with built-in turbine
Low cost hot air station for less complex
repair tasks and hot air applications suck as
shrinking. The in-built turbine provides hot air
and variable temperatures. The temperature of
the hot air is electronically controlled.
• Analogue temperature adjustment
• Temperature range 50°C-550°C
• Air Volume 5-50 l/min (ESD Safe)
• Two rotary potentiometers to set air ESD SAFE
20 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
REPAIR/REWORK BGA/QFP STATIONS
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 21
REPAIR/REWORK BGA/QFP STATIONS
EW
Weller’s next-generation repair and rework station combines a completely
N new design with state-of-the-art split optic camera technology to provide
users with absolute reliability, optimum process control and enhanced ease
of use.
Weller’s next-generation repair and rework • Advanced
The system design for enhanced
was engineered to bring precision
station combines a completely new design togetherThe WQB4000SOPS
a finely is modularly
tuned balance of auto-built with a slide platform,
advanced patented systems and materials of the highest quality to
with state-of-the-art split optic camera mated technology for component
guarantee industrial pick-up
reliability and long-lasting durability.
technology to provide users with absolute and positioning
• Heating with
from aabove:
semi-automated
selective and sensitive
reliability, optimum process control and rework cycle
The hot– opening
gas heaterupwith
newpatented
possibili-
nozzle system, coupled with
enhanced ease of use. digital control in
ties and applications electronics
repair and for rework.
temperature monitoring and regulation
of the air flow rate, facilitates the finely metered supply of heat to
the components. A temperature sensor placed directly in the hot
Well considered
gas nozzle detail, high-precision
prevents thermal overload of the component and
results and an outstanding
efficiently price-perfor-
regulates the top heater, providing maximum process
mance ratio promise to make this new
control.
system •from
Heating fromthe
Weller below:
first rapid
choiceandamong
homogeneous
discerningTheusers.
temperature-regulated two-zone infrared bottom heater
provides rapid, yet precisely controlled warm-up at homogeneous
substrate temperatures.
• Streamlined technology
The new WQB4000SOPS enables users to work with a standard
PC via a USB 2.0 port. Additional appliances or interface cards are
not required. Technical Data
• Monitoring software: comprehensive functions Dimensions (L x W x H):
The monitoring software determines temperature profiles and approx. 630 x 630 x 650 mm
facilitates definition of the optimal soldering process. Dynamic dimensions:
• Teach-in feature: fast, effective parameter identification approx. 1030 x 630 x 650 mm
Advanced design for enhanced Repeatable results can only be achieved by a process cycle that Power supply voltage: 230V, 50/60 Hz
considers all the parameters of the repair operation. The ‘Teach-in’ Mains fuse: T10A
precision feature provides a quick and easy method of determining process
The WQB 4000SOPS is modularly Power: 2300W
cycle parameters and identifying critical points - without the need
built with a slide platform, advanced for in-depth operator knowledge. The software includes a library of Top heater: 700W
patented systems and materials of the soldering profiles, i.e. general and specific parameters enabling Bottom heater:
highest quality to guarantee industrial repeatable use. New profiles can be edited easily by the user and large 1600W (260 x 260) mm
added to the library. small 400W (120 x 120) mm
reliability and long-lasting durability. • Perfect component/circuit board alignment Compressed-air supply:
With the split optic camera, live images of a component and a 400-600 kPa purified, dry compressed air
circuit board can be aligned independently of each other using the Compressed-air converter:
x, y and theta axis fine adjustment drives.
1. Component size & theta axis vacuum 60 kPa
2. Align y axis Temperature control:
3. Align x axis infinitely variable 50°C - 400°C
4. Component aligned! control precision ± 10°C
• Removal (desoldering) of the defective component Flow control:
The ability to preheat the circuit board and a temperature/time infinitely variable 5-50 l/min.
controlled process are critical for good reflow of the solder joints. Air consumption: 60-100 l/min. (4 bar)
At the end of the reflow cycle, to avoid damage to the solder pads,
a vacuum lift automatically removes the component from the board Total weight: approx. 40kg
with minimum force and exact temperature control.
s • Cleaning of the circuit board
Residual solder should be removed from the board with a
desoldering iron or desolder wick. Residual contaminants can be
Heating from above: selective removed with a suitable solvent spray.
and sensitive • Positioning of the new component
The hot gas heater with patented nozzle The new WQB4000SOPS station’s split optic camera placement
system ensures precise positioning of a wide range of components
system, coupled with digital control elec- - from BGA to fine pitch SMT.
It is a comprehensive,
tronics for user-friendly
temperature system
monitoring and • Component soldering
for the removal and soldering of BGA
components,regulation of risk
without the theofairthermal
flow rate, facilitates Reflow of the replaced component is essentially a repeat of the
damage tothe thefinely metered
component supply
or circuit of heat to the
board. removal process, without the vacuum lift being initiated at the end
components. A temperature sensor placed of the profile. An extensive range of hot gas nozzles and adapters
are available to cater for the many body sizes of BGA devices or
directly in the hot gas nozzle prevents Heating QFP
fromand below:
PLCC packages. Optimized ease of use
thermal overload of the component and rapid and homogeneous
• Temperature profiling Everything about the new WQB 4000SOPS
efficiently regulates the top heater, provi- An eight-step temperature
The temperature-regulated two-zoneprofile enables has soldering and coolingand designed for
been engineered
ding maximum process control. that areheater
infrared bottom perfectly tailored
provides to specific requirements.
rapid, ease of use and superb results – from its
• Split Optics for perfectly
yet precisely controlled warm-up at accurate positioning
advanced, user-friendly software all the way
The new SOPS (Split Optic Positioning System) with the high-
homogeneous substrate
resolution temperatures.
2 Mpix CMOS USB 2.0 camera enablesthroughaccurate
to its many supportive details, such
as the SoftStart
positioning of the components following desoldering. feature.
It works with
a single camera and two-colour lighting for exact positioning.
Superb image quality at high dynamics and very low image noise
ensure precise, ergonomic component mounting.
• An ever expanding field of applications
The new WQB4000SOPS is optimally equipped to take on repair
and rework in mobile communications, research and general BGA.
QFP work. Specifically, with PBGA, CBGS, CCGA, CSP’s, Micro
BGA, QFN, PLCC, SOP and PGA components.
1. Components without direct access to the solder joint
2. Leaded components with external solder joints
3. A wide variety of special modules.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 23
TIPS & NOZZLES
24 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
TIPS & NOZZLES
ET SERIES
Suits EC1000/2000 WES50, WES51, WESD51 stations fitted with EC1201A, WSP50 and WSP51, PES50 & PES51 soldering pencils.
Blunt ETLB 1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 25
TIPS & NOZZLES
W K111 Type K
NE Thermocouple Weld, LTB
T0054441799 LT Adapter
26 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
TIPS & NOZZLES
Soldering Tips
Chisel Tip 0.8mm 0.4mm 8.4mm NTH
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 27
TIPS & NOZZLES
WSP150 SERIES
28 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
TIPS & NOZZLES
Soldering tip.100
Screwdriver, leakage
x 390L resistance:< 2 Ω (tip-to-ground)
*MT602 1
Soldering tip leakage
Screwdriver, .200 x 350L
current: < 2 mV (tip-to-ground)
*MT610 1
Surface Mount Tips PLCC’S Quad PLCC-44, .70 SQ., Flex Leg MT1203F 1
ScopeQuad
ofPLCC-68,
delivery1.000 soldering
SQ., Flex Leg kit WD 1000HPT
MT1208F 1
Published by
Author:
Marketing,
Published Besigheim
by
Contact:
Author:
Stephan
Marketing, Hofmann
Besigheim Phone: +49 (0) 7143 580 145
Global Product Manager Electronic Fax: +49 (0) 7143 580 113
Contact: Stephan.Hofmann@CooperIndustries.com
Stephan Hofmann Phone: +49 (0) 7143 580 145
Cooper Tools GmbH
Global Product Manager Electronic Fax: +49 (0) 7143 580 113
Carl Benz Str. 2 Stephan.Hofmann@CooperIndustries.com
D-74354 Besigheim
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 29
Cooper Tools GmbH Copyright © 2008, Cooper Tools GmbH
TIPS & NOZZLES
WTA-2 1808-1812, SOD87, SOT23, SOD89 3.0 11.0 WTA-2 T0054414699 1pr
WTA-11
10 x 10 11 x 11 T0058754967 1
12 x 12 13 x 13 T0058747848 1
15 x 11 16 x 12 T0058747893 1
18 x 18 20 x 20 T0058747833 1
21 x 21 23 x 23 T0058754770 1
22 x 22 24 x 24 T0058754820 1
25 x 25 27 x 27 T0058747764 1
27 x 23 29 x 25 T0058747993 1
27 x 27 29 x 29 T0058747850 1
29 x 29 31 x 31 T0058747927 1
28 x 32 30 x 34 T0058747999 1
33 x 33 35 x 35 T0058747906 1
35 x 35 37 x 37 T0058754887 1
37 x 37 39 x 39 T0058747753 1
42 x 42 44 x 44 T0058747874 1
45 x 11 47 x 13 T0058754903 1
45 x 26 47 x 28 T0058754905 1
46 x 46 48 x 48 T0058747763 1
47 x 47 49 x 49 T0058747916 1
49 x 49 51 x 51 T0058747941 1
57 x 18.5 59 x 20 T0058747985 1
55 x 45 57 x 47 T0058755749 1
Adaptor T0058747770 1
30 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
TIPS & NOZZLES
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 31
TIPS & NOZZLES
Taper - WPT1 1
32 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
TIPS & NOZZLES
DS SERIES TIPLETS Suit DS102, DS651, DS1201, Tools and DS650 Station/DS80UNC/DSV80
DS118 DS118 1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 33
TIPS & NOZZLES
005 42 507 99 CT2 EX7 Chisel tip bent 370°C 7,0 mm 16,90
005 42 508 99 CT2 EX8 Chisel tip bent 425°C 7,0 mm 16,90
005 42 517 99 CT2 FX7 Chisel tip bent 370°C 10,0 mm 16,90
34 Note: Some of the above items may require a freight lead time. Product depictions are not to scale.
005 42 518 99 CT2 FX8 Chisel tip bent 425°C 10,0 mm Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
16,90
TIPS & NOZZLES
F04
F06 Flat Nozzle 12 x 1.5mm T0058727772 1
D08
D06 Nozzle 10 x 13mm T0058727782 1
Many NEW stock sizes available. Also adaptors to suit all Weller and some other brand desoldering tools.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 35
TIPS & NOZZLES
S.M.T. TIPLETS suits WTCPS/T and EC Stations with EC1201 pencils WES50D and WSP80 Stations
Adaptors
36 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
FUME EXTRACTION
Fume Extraction
Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and
the environment. Most people thought that the move to lead-free soldering would be more nature friendly. In reality lead-free soldering smoke emissions contain
Zero-Smog® System
more breathable fine dust particles. More and smaller particles are produced due to the higher working temperatures required and because more flux is used in the
soldering process.
Zero-Smog® System
In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects
on people and machines.
It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get
caught more easily and block the alveoli in the lungs.
Volume Extraction
Volume Extraction
Volume Extraction
Volume Extraction
More suitable for applications involving, for example, solder baths, hot air
soldering, micro solders and gluing work. Weller® offers various mobile
systems that purify the air at up to a maximum of 8 workplaces.
Filter Technology
Filter
Filter Technology
Technology
Weller® Zero-Smog® Systems are specifically 1. The hazardous substances are efficiently Filter Class Recommended Application
WellerZero-Smog
Weller ®
Zero-Smog®Systems
®
are specifically
Systems are specifically
designed for continuous operation in industrial
® 1. The hazardous
1. captured
The hazardous substances
by thesubstances
nozzle andare areefficiently
are absorbed
designed for continuous operation in industrial efficiently captured by the nozzle and FFilter
5 Class Recommended
for Application
standard applications
Filter Technology
designed for continuous operation in industrial
environments. Care and attention at the design
environments. Care and attention at the design
captured
into by the nozzle and are absorbed
the filter.
are absorbed into the filter. F5 for standard applications
environments. Care and attention at the design
stage plus careful component choice and a
stage plus careful component choice and a high 2.
into theparticles
. Bigger filter. get
Bigger particles get caught
caughtin inthe
thepre-
pre- F7 for applications with high
stage plus careful component choice and a
high quality manufacturing process have given
quality manufacturing process have given Weller® . filter
Bigger
filter particles
and
and smallerget
smaller caughtget
particles
particles in the
get pre-in
caught
caught F7 for applications with high
® Zero-Smog® Systems are specifically
flux content
Weller
Weller
®
high quality manufacturing process have given
extraction systems a world wide
extraction systems a world wide reputation for 1. The
filter
the
in hazardous
and
HEPA
the HEPA(High substances
smaller particles
Efficiency
(High are efficiently
getParticulate
caughtAir)
Particulate
Efficiency in Filter Class Recommended Application
flux content
designed for continuous operation in industrial
Weller® extraction systems a world wide
reputation for reliability and longevity.
reliability and longevity. captured
filter.by
the HEPA
filter.
Air) the Efficiency
(High nozzle andParticulate
are absorbedAir) FH12
5 / H13 for standard applications
filter for clean rooms
environments. Care and attention at the design
reputation for reliability and longevity. . into
3. The the filter.
Wide
filter.
The Wide BandGas
Band GasFilter
Filterremoves
removes
H12 / H13 filter for clean rooms
Weller have a three stage fumes and adhesives. 1000 – 100
Weller®Zero-Smog
Zero-SmogSystems
® ®
stage plus careful component choice and a
®
Systems have a three .
. Bigger
The Wideparticles
Band
fumes and adhesives. get
Gas caught
Filter in the pre-
removes F7 for applications with high
filter system for removing small particles, fumes 1000 – 100
high quality manufacturing process have given
Weller filter
stage ®
Zero-Smog Systems have a three
system for removing small
® filter
fumesand
andsmaller particles get caught in
adhesives. flux content
and gases that are produced in different working End product – clean air – is re-circulated into the
Weller extraction systems a world wide
stage®filter system for removing small
particles, fumes and gases that are produced the HEPA (High Efficiency Particulate Air)
End product – clean air – is re-circulated into
processes: workplace.
reputation for reliability and longevity.
particles, fumes and gases that are produced
in different working processes: filter.
End product – clean air – is re-circulated into
the workplace. H12 / H13 filter for clean rooms
in different working processes: . The Wide Band Gas Filter removes
the workplace. 1000 – 100
Weller® Zero-Smog® Systems have a three fumes and adhesives.
stage filter
particle size:system for removing small medium filtration efficiency Em %
particles, fumes and gases that are produced
particle size: against
mediumparticle
End product – clean air – is re-circulated into size
filtration 0,12 µm:Em %
efficiency
in different working processes:
0,5 µm e.g. viruses the workplace. against particle size 0,12 µm:
100
0,5 µm e.g. viruses 90
100
5 µm e.g. bacteria, pigments
80
90
5 µm e.g. bacteria, pigments
10 µm size:
particle e.g. fibres, pollen 70
80
medium filtration efficiency Em %
10 µm e.g. fibres, pollen 60
against
70 particle size 0,12 µm:
0,5 µm e.g. viruses 50
60
100
40
50
90
5 µm e.g. bacteria, pigments
30
40
80
100 µm e.g. fog, hair 20
30
10 µm e.g. fibres, pollen 70
100 µm e.g. fog, hair 10
20
60
10
50
Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13
40
Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13
30
Filter Class F5, F7: Fine dust filter as per EN 779
100Class
µm F5,e.g.
Filter F7:fog,
Finehair
dust filter as per EN 779 20
Filter Class F5, F7: Fine dust filter as per EN 779
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter 10
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
1. Fine dust filter
Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13
For standard applications with a small amount of flux
1. Fine dust filter
and pollution gases with high solid content, Weller
For standard applications with a small amount of flux ®
Filter Process
Filter Class F5, F7: Fine dust filter as per EN 779 offers filter classes F or F7.
and pollution gases with high solid content, Weller ®
Filter Process
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
WFE 0D, WFE S,
offers filter classes F or F7.
0D,
WFE S, WFE8S,
WFE S,
Filter Process .
1. Compact
1. Fine dust
Fine dust
filter consisting of:
filter
filter
WFE, WFE P WFE X S, WFE
WFE ES, WFE8S,
CS HEPA
. filter filter
ForCompact
standard consisting
applications withof:
a small amount of
WFE, WFE P WFE X WFE ES, WFE CS For standard applications with a small amount of flux
Filters particles up to 0,3 μm. Weller offers HEPA (High
HEPA
flux andfilter
pollution gases with high solid content, ®
and pollution gases with high solid content, Weller
Filter Process Efficiency Particulate Air) filters of class H1 and H1,
Filters particles up to 0,3 μm. Weller offers HEPA (High
Weller® offers filter classes
offers filter classes F or F7. F5 or F7.
WFE 0D, WFE S, medium filtration efficiency 99,5 % / 99,95 %.
Efficiency Particulate Air) filters of class H1 and H1,
.+. 1. S, WFE 8S,
WFE medium filtration efficiency 99,5 % / 99,95 %.
2.Compact
. Compact filter
filter consisting
consisting of: of:
.+.WFE P
WFE, WFE X 1. ES, WFE CS
WFE Wide
HEPAband filtergas filter
HEPA filter
For cleaning harmful fumes and vapours. The Weller
Wide
Filtersband gas up
particles filter
to 0.3 µm. Weller offers HEPA
Filters particles up to 0,3 μm. Weller offers HEPA (High
wide band gas filter consists of 0 % active
For cleaning harmful fumes and vapours. The Weller
(High Efficiency Particulate Air) filters carbon
of class H12
Efficiency Particulate Air) filters of class H1 and H1,
and 0 % Puratex. Harmful gases with a high mole-
wide band gas filter consists of 0
H13, % active carbon
medium filtration efficiency 99,5 % / 99,95 %. /
and medium filtration efficiency 99.5%
cular weight are cleaned by the active carbon. Puratex
99.95%.% Puratex. Harmful gases with a high mole-
and 0
.+. 1. is suitable for absorbing gases of lower molecular
cular weight are cleaned by the active carbon. Puratex
. or . . or . Wide band gas filter
weight. Because of its composition, Puratex is able
is suitable for absorbing gases of lower molecular
Wide band gas filter
. or . . or . For cleaning harmful fumes and vapours. The Weller
to convert a large number of chemical pollutants by
weight. Because of its composition, Puratex is able
For cleaning harmful fumes and vapours.
wide band gas filter consists of 0 % activeThe
carbon
means of molecular modification into non-polluting
to convert a large number of chemical pollutants by
Weller wide band gas filter consists of 50% active
and 0 % Puratex. Harmful gases with a high mole-
gases.
means of molecular modification into non-polluting
carbon and 50% Puratex. Harmful gases with
cular weight are cleaned by the active carbon. Puratex
1. gases.
a high molecular weight are cleaned by the active
is suitable for absorbing gases of lower molecular
1. . or . . or . . Gas filter
carbon. (option)
Puratex is suitable for absorbing gases of
weight. Because of its composition, Puratex is able
The gas filter is used for extracting adhesive fumes
. Gasmolecular
lower filter (option)
weight. Because of its composition,
to convert a large number of chemical pollutants by
and solvents. Experience has shown that filtering
The gas filter is used for extracting adhesive fumes
Puratex is able to convert a large number of
means of molecular modification into non-polluting
suspended particles is not so vital in this respect.
and solvents. Experience has shown that filtering
chemical pollutants by means of molecular
gases.
The gas filter is filled with 0 % gases.
active carbon and
suspended particles is not so vital in this respect.
modification into non-polluting
1.
0 % Puratex. The HEPA H12 and H13 is omitted.
The gas filter is filled with 0 % active carbon and
. Gas filter (option)
0 % Puratex. The HEPA H12 and H13 is omitted.
3. Gas filter (option)
filter drawings not true to original The gas filter is used for extracting adhesive fumes
The gas filter is used for extracting adhesive
and solvents. Experience has shown that filtering fumes
filter drawings not true to original
and solvents. Experience has shown that filtering
suspended particles is not so vital in this respect.
suspended particles is not so%vital
The gas filter is filled with 0 in this
active respect.
carbon and
The%gas
0 filter is filled with 50% active carbon
Puratex. The HEPA H12 and H13 is omitted.
and 50% Puratex. The HEPA H12 and H13 is
filter drawings not true to original omitted.
38 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
(50 % active carbon, 50 % Puratex)
es the WFE a genuine Air consumption 30 l/min
Fine dust filter F7
lter-lift system allows Height 200 mm (7.8 in)
cartridge replace-
Diameter 140 mm (5.5 in) Order No. 0V 005 36 402 99
Tip Extraction
ction) soldering irons
HEPA filter H13
he unit – additional Weight 2,7 kg / 5.9 lb Order No. 10V WFE
TIP FUME EXTRACTION
and
wide band gas filter
WFE P Attributes
Solder
Small, Fume electrically
portable, Extractingdriven
Unit
fume extraction unit The Weller® WFE P is a line voltage fume Up to FE soldering irons can be
Description Material No. Shelf
extraction unit designed to run with one or two connected
Pack
Fine dust pre-filter F7 FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce the
de band gas filter
atex) WFE WFEP2
has an electric, long-life, soundproofed vacuum
The Weller WFE P2 is a line voltage fume
® required Attributes
T0053624599
vacuum 1
Small, portable, compressed air pump to produce the required vacuum – it does
driven extraction unit designed to run with one or power stages for higher extraction
two FE (Fume Extraction) soldering irons. The
The fume extraction unit WFE requires clean Up to FE soldering irons can be
05 36 402 99 fume extraction unit WFE P2 has an electric, long-life, soundproofed perfomance with FE soldering irons
not need a compressed air supply. The vacuum
WFE pump to produce the required vacuum Portable unitconnected
and oil-free compressed air. The vacuum is ge-
pump has two power settings which can be se-
vacuum for stand alone applications
-nerated by a maintenance-free compressed air
it does not need a compressed air supply. Maintenance-free compressed air
lected by means of rocker switches depending
The vacuum pump has two power settings
Attributes
converter. The contaminated air is purified by a
which can be selected by means of rocker
on the number of FE soldering irons connected converter
switches depending on the number of FE
pre-filter and main filter system. A compressed
to the unit. This saves energy. The motor is
soldering irons connected to the unit. This Portable unit for stand alone applicatio
e voltage fume Up to FE soldering irons can be air cleaning filter removes additional odours
saves energy. The motor is maintenance-free
maintenance-free and has a thermal over load
o run with one or two connected and has a thermal over load to protect the unit.
caused by the compressed air. This highly
to protect the unit. The filter lift system allows
The filter lift system allows fast and convenient
ering irons. The WFE P Electric vacuum pump to produce the main filter replacement. FE soldering irons are HEPA filter H13
oundproofed vacuum required vacuum
efficient filter system makes the WFE a genuine
fast and convenient main filter replacement.
connected directly to unit - additional leads and
uired vacuum – it does power stages for higher extraction air recovery system. The filter-lift system allows
FE soldering irons are connected directly to unit
are not required.
r supply. The vacuum perfomance with FE soldering irons • Up to 2 FE soldering irons can be
fast and convenient filter cartridge replace- wide band gas filter
– additional leads are not required.
connected
ings which can be se- Portable unit for standESD
alone
safe applications
low sound level
•ment. The FE (Fume Extraction) soldering irons
Electric vacuum pump to produce the
switches depending required vacuum HEPA filter H13
ering irons connected •are connected directly to the unit – additional
2 power stages for higher extraction and
rgy. The motor is Technical Data leads are not required.
performance with 2 FE soldering irons
s a thermal over load
• Portable unit for stand alone wide band gas filter
Maximum capacity 2 FE soldering irons Scope of supplyapplications.
er lift system allows ESD safe low sound level Scope of supply includes:
Sound level HEPA filter H13
< 45 db (A) at 1 m distance • WFE P Fume extraction unit
filter replacement. WFE P Fume extraction unit
and • Compact filter
nected directly to unit Operating voltage 230 V / 50 Hz
Technical
wide band gas filter
Data
Compact filter Scope
Consists ofof: HEPA filter H13, wide band
supply Fine dust pre-filter F7
required. Power input 70 W gas filter (50% active carbon,
Consists of: HEPA filter H13, wide band gas filter
Characteristics
Maximum vacuum Maximum capacity
30.000 Pa 2 FE soldering irons 50% Puratex)
(50 % active carbon, 50 % Puratex)
• Fine
WFE Fume extraction unit
dust filter F7
Height Fine dust filter F7
Sound level 295 mm (11.6 in) < 39 db (A) at 1 m distance Technical Data:
Compressed air cleaning filter
Two operating modes: Maximum capacity 2 FE soldering irons
Diameter Maximum vacuum
140 mm (5.5 in) 20.000 Pa Order No. 0V Compact filter
Mode 0: Vacuum regulated to 1.000 Pa Sound level <45005 36 386 99
db (A) at 1m distance Fine dust pre-filter F
Operating pressure
Mode 1: Extraction
Weight 4 kg / 8.8 lb can 3,5 - 6 bar
performance Consists of: HEPA filter H13, wide band gas filter
Operating voltage 230V/50Hz
Order No. 10V WFE2P
be set between 0 %Fine dust pre-filter F7
– 100 % with the Power (50 % active carbon, 50 % Puratex)
input 70W
Air consumption 30 l/min
Maximum vacuum 30.000 Pa
de band gas filter 0 control buttons. Fine dust filter F7
Height 200 mm (7.8 in) Height 295mm (11.6in)
atex) Electronic filter check (LED) through Diameter 140mm (5.5in)
differentialDiameter
pressure measurement. 140 mm (5.5 in) Order4kg/8.8lb
Weight No. 0V 005 36 402 99
005 36 386 99 Weight
If the specified degree of contamination 2,7 kg / 5.9 lb Order No. 10V WFE
WFE2P is exceeded, the unit switches off.
Electronic filter operation status display.
WellerFor ® WFE20D
better management of filter change
ically
it
WFE P
intervals – the filter operating hours Characteristics
Attributes
Small, portable,
can be pre-specified. The needelectrically
for filter driven WFE20D T0053647699 1
change isfume
indicated in good time
extraction allowing
unit Two operating modes: The Weller
Solder ®
WFE P is a line voltage fume
fume extraction unit with built-in Up to FE soldering irons can be
adequate time for filter procurement and turbine for up to 20FE soldering irons
extraction unit designed to run with one or two connected
replacement. Interface RS for remote
Mode 0: Vacuum regulated
Consists of:
to 1.000 Pa
Mode 1: Extraction FE (Fume Extraction) soldering irons. The WFE P
performance can Electric vacuum pump to produce the
monitoring or remote control. • Extraction Unit
Remote control available as accessory. be set between has an electric, long-life, soundproofed vacuum
0 % – 100
• Fine Dust filter F7 % with the required vacuum
control buttons. •pump to produce the required vacuum – it does
Compact filter power stages for higher extraction
Electronic filter•not need a compressed air supply. The vacuum
check
Wide (LED)
Band Gas through
filter perfomance with FE soldering irons
differential pressure (50% Active measurement.
Carbon, 50% Puratex)
pump has two power settings which can be se- Portable unit for stand alone applicatio
rs and filter conta- Attributes If the specified•lected by means of rocker switches depending
ROHS & WEEE
degree compliant
of contamination
corded electronically. is exceeded, the unit switches off.
a filtration rate of Up to 0 FE soldering irons can be WFEon the number of FE soldering irons connected
20D Mobile Fume Extraction Unit
Electronic filter The operation
WFE 20D hasstatus display.for fume extraction direct from the soldering tip. Up to 5 Weller FE soldering
been designed
with a particle size of connected to the unit. This saves energy. The motor is
irons
For better management can be connected
of filter directly.
changeThe capacity is 20 FE soldering irons with the optional DN 40 tubing system.
Electric driven, maintenance free turbine The powerful maintenance free electronically controlled turbine provides a maximum vacuum of 12.000 Pa.
intervals – the maintenance-free and has a thermal over load
filter operatingalso hours
produces the required vacuum The microprocessor ensures detection of operating hours and the status of filter absorbency. The three-
wheels to allow easy movement can be to protect the unit. The filter lift system allows
pre-specified.
stage filterThe
systemneed for filter
is suitable for use with soldering fumes. The filter system consists of a fine particulate
airfast and convenient main filter replacement.
filter F5 and a combined submicron particulate air filter H13 plus wide band gas filter (50 % AKF, HEPA filter H13
50 %
of the unit change is indicated in good time allowing
Mobile unit for central and stand alone
Puratex). and
adequate time FE soldering irons are connected directly to unit
for filter
It removes procurement
99,95 and up to 0,12 µm according to EN 1822.
% of contaminants
applications replacement.Characteristics:
Interface RS for remote
wide band gas filter
– additional leads are not required.
• Two operating modes:
Central installation for pipe systems upESD safe low sound level
monitoring or Mode
remote control.
0: Vacuum regulated to 12.000 Pa
to 00 m (787 in) Mode 1: Extraction performance can be set between 20% - 100% with the control buttons.
Remote control available as accessory.
• Electronic filter check (LED) through differential pressure measurement. If the specified degree
low sound level Technical Data of contamination is exceeded, the unit switches off.
• Electronic filter operation status display. For better management of filter change intervals -
Maximum capacity 2 FE soldering irons Scope
the filter of supplyhours can be pre-specified. The need for filter change is indicated in good
operating
Sound level < 45 db (A) at 1 m distance time allowing adequate time for filter procurement and replacement. Interface RS 232 for remote
ction) soldering controlled. Operating hours and filter conta- Attributes monitoring or remote control.
WFE P Fume extraction unit
to the fume Fine dust pre-filter F5
Operating voltage 230 V / 50 Hz
mination level are also recorded electronically. • Remote control available as accessory.
Compact filter
Attributes: Fine dust pre-filter F
the Pipe System The filter system achieves a filtration rate of
Power input 70 W Up to 0 FE soldering irons can be
• UpConsists of: HEPA filter H13, wide band gas filter
to 40 FE soldering irons can be connected
o 40 FE solde- 99,95 % as per EN 1822 with a particle size of
Maximum vacuum 30.000 Pa connected • Electric driven, maintenance free turbine produces the required vacuum
(50 % active carbon, 50 % Puratex)
• 4 wheels to allow easy movement of the unit
Fine dust filter F7
the unit. The 0,12 μm. Height 295 mm (11.6 in)Electric driven, maintenance
• Mobile freeand
unit for central turbine
stand alone applications
bine generates Diameter 140 mm (5.5 in) produces the •required
Central vacuum
Order No. 0Vfor pipe systems
installation up to 200 m (7874 in)
005 36 386 99
lectronically HEPA filter H13 4 kg / 8.8 lb wheels to allow Technical easy Data: movement
Weight Maximum Ordercapacity
No. 10V 40 FE solderingWFE2P
irons
and of the unit Sound level <51 db (A) at 1m distance
de band gas filter 0 wide band gas filter Mobile unit Operating
for central voltage
and 230V/50Hz
stand 120V/60Hz
alone
Power input 630VA
atex) applications Maximum vacuum 12.000 Pa
Central installationMax. delivery for pipe systems
rate 100 m3/h up
to 00 m (787 Dimensions
in) (L x W x H) 450 x 450 x 695 mm, 17.7 x 17.7 x 27.3 in
05 36 476 99 Weight 45kg/99lb
WFE20D
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 39
Tip Extraction
TIP FUME EXTRACTION
40 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Weight 2,7 kg / 5.9 lb Order No. 10V WFE
Extraction
WFE P Attributes
VOLUME
Small, portable,FUME EXTRACTION
electrically driven
Volume Extraction fume extraction unit The Weller® WFE P is a line voltage fume
extraction unit designed to run with one or two
Up to FE soldering irons can be
connected
FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce th
Weller® WFE2X has an electric, long-life, soundproofed vacuum required vacuum
t pump to produce the required vacuum – it does
Description Material No. power Shelf
stages for higher extractio
places Attributes
WFE 2X not need a compressed air supply. The vacuum perfomancePack with FE soldering iron
Mobile fume extraction unit
Mobile fumeAttributes WFE2X
extractionpump has two power settings which can be se-
unit purifies air WFE2XAU Portable unit 1 for stand alone applic
purifies air up to two workplaces
at up to workplaces Mobile lected by means of rocker switches depending
fume extraction unit purifies air up to
two workplaces.
Electronic filter Mobile on the number of FE soldering irons connected
fume extraction
control and easyunit purifies air
at The
up toWFE2X is a fume
workplaces extraction unit and is
Attributes filter exchange Electronic
to the unit. This saves energy. The motor is
suitablefilterfor applications
control and with
easy a high demand
Wireless remote forcontrol
filter gas and with
exchange particle alarm
maintenance-free and has a thermal over load
filtration, e.g. soldering,
Mobile fume extraction unit purifies air function adhesives,
Wireless remote clean roomwith
control work and laser.
alarm
to protect the unit. The filter lift system allows
Extra noise damped It can be
function placed
metal on a trolley and be moved
housing HEPA filter H13
at up to workplaces Extra
easily fast and convenient main filter replacement.
noise damped
between metal housing
different work places.
Quick and simple installation and
Electronic filter control and easy Quick FE soldering irons are connected directly to unit
and
Variable simple
speed installation
and the alarm function for
Trolley available Trolleyasavailable
filter accessory
exchange ascan
accessory
be set via the remote wide band gas fi
filter exchange Minimized – additional leads are not required.
foot print
ESD safe Minimized
low sound foot print For
level control. applications which produce a
Wireless remote control with alarm Switching power
Switching power supply fits for all global
supply
large quantity fitsof for all global
particles, e.g. lead-free
voltages
function voltages soldering,
Optimized an external
lifetime filter pre-filter can be fitted
Extra noise dampedTechnical metal housing
Data Optimized lifetime to increase
filter the lifetime of the main filter. To
makeScope installation easier, the WFE2X can be
Quick and simple installation Maximum capacity 2 FE soldering irons of supply
suspended under the work table with special
Trolley available asSound level accessory < 45 db (A) at 1 m distance fittings. An RS 232 interface makes it possible
WFE P Fume extraction unit
Minimized foot print Operating voltage 230 V / 50 Hz to integrate the software with other process
Compact filter
equipment. Fine dust pre-filte
Switching power supply fits for all global70 W
Power input
Technical Consists of: HEPA filter H13, wide band gas filter
Data:
voltages ESD safe
Maximum vacuum
low sound level
30.000 Pa Maximum (50 % active carbon, 50 % Puratex)
capacity 2 work plces
Optimized lifetime Height filter 295 mm (11.6 in) Maximum Fine dust filter F7
extraction rate 140 m3/h
Sound level <52 db (A) at 1m distance
Diameter
The WFE 2X is a fume extraction unit and is 140 mm (5.5 in) Order No. 100-240V/50/60Hz
0V 005 36 386 99
suitable for applications with a high demand
low sound level
Operating
WFE 2X Kit
voltage
Weight 4 kg / 8.8 lb Order100W
Power input No. 10V WFE2P
for gas and particle filtration, e.g. soldering,
adhesives, clean room work and laser. Maximum vacuum 2.300 Pa
0 Optimized lifetime Dimensions (L x W x H)
unit and is filter
It can be placed on a trolley and be moved 210 x 460 x 660 mm
high demand
easily between different work places. Vari- WFE 2X Kit 8.3 x 18.1 x 26 in
g. soldering, HEPA filter H13 and
able speed and the alarm function for filter Weight 15kg/33lb
wide band gas filter
laser. exchange can be set via the remote control.
For applications which produce a large quantity Optimized lifetime
of particles, e.g. lead-free soldering, an external filter
be moved
pre-filter can be fitted to increase the lifetime
aces. Vari-
of the main filter. To make cleaning easier, the Mobile fume extraction kit
WFE 2X can be suspended under the work table HEPA filter H13 and
on for filter
with special fittings. An RS 232 interface makes wide band gas filter
ote control.
it possible to integrate the software with other
a large quantity WFE 2X Kit
process equipment.
Scope of supply
WFE2X KIT 1 WFE2XKIT1AU 1
ing, an external 005 36 588 99 WFE 2X Fume extraction
Mobile fume extraction kit
unit 100-240 V / 50/60 Hz
e the lifetime Scope of supply Includes:
005 36 579 99 KIT 1 WF 60 Sloped stativ
time Technical Data
ng easier, the extraction arm for volume extraction
Mobile fume extraction kit
Maximum capacity 2 work places •consists of:
2X Fume extraction unit
WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
r the work table
Maximum extraction rate 140 m3/h Compact filter
100-240V / 50/60Hz
005 36 598 99 Stativ extraction arm
•005 36 573 99 Funnel nozzle
KIT 1 WF60 Sloped stativ extraction
nterface makes
Sound level < 52 db (A) at 1 m distance Consists of: HEPA filter H13, wide band gas filter
005 36 574 99 Stop valve
Operating voltage 100 – 240 V / 50/60 Hz (50 % active carbon / 50 % Puratex) arm for volume extraction consists of:
3 and Power input
ware with other 005 365 75 99 Bench mounting bracket
Scope of supply 005 36 576 99 Extraction hose
100 W Stativ extraction arm
s filter Maximum vacuum 2.300 Pa
Accessories for WFE 2X see on page 16.
Funnel nozzle
Dimensions (L x W x H) 210 x 460 x 660 mm 005 36 588 99 WFE 2X Fume extraction
Stop valve
8.3 x 18.1 x 26 in Order No. 0V plug 005 36 588 99 unit 100-240 V / 50/60 Hz
Order No. 230V
Bench mounting005 36 589 99
bracket
Weight 15 kg / 33 lb Order No. 10V plug WFE2X 005 36 579 99 KIT 1 WF 60 Sloped stativ
Scope of supply Extraction hose
extraction arm for volume extraction
laces10 consists of:
WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
h Mobile fume extraction kit
Compact filter
005 36 598 99 Stativ extraction arm
005 36 573 99 Funnel nozzle
(A) at 1 m distance Consists of: HEPA filter H13, wide band gas filter
005 36 574 99 Stop valve
0 V / 50/60 Hz (50 % active carbon / 50 % Puratex)
005 365 75 99 Bench mounting bracket
005 36 576 99 Extraction hose
Accessories for WFE 2X see on page 16.
Scope of supply
0 x 660 mm
005 36 588 99 WFE 2X Fume extraction
1 x 26 in Order No. 0V plug 005 36 588 99 Order No. 230V 005 36 589 99
unit 100-240 V / 50/60 Hz
3 lb Order No. 10V plug WFE2X
005 36 579 99 KIT 1 WF 60 Sloped stativ
extraction arm for volume extraction
consists of:
Hz
005 36 598 99 Stativ extraction arm
005 36 573 99 Funnel nozzle
005 36 574 99 Stop valve
005 365 75 99 Bench mounting bracket
005 36 576 99 Extraction hose
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 41
Air consumption 30 l/min
Fine dust filter F7
Height 200 mm (7.8 in)
Diameter 140 mm (5.5 in) Order No. 0V 005 36 402 99
Weight 2,7 kg / 5.9 lb Order No. 10V WFE
Tip Extraction
absorbency. filter is fitted as
Noise damped metal housing automatic soldering, laser or other major dust emitting
standard and is easy to replace, consisting
applications. It acts as a first stage in the filter process
of a fine particulate air filter and combined
Quick and simple installation increasing the lifetime of the main filter units. The pre-
submicron particulate air filter + wide band
filter can be fixed directly to the top of the WFE 4S or in
gas filter. The WFE 4S centralized system is
supplied complete with oneconjunction with the WFE 2S and WFE 2X as an external
pipe connector
(three optional) and is easilypart of the fume extraction system.
connected to the
pipe system. A wide range Scopeof pipeofaccessories
supply
including arms with conical nozzle,
Filter boxflat nozzle
small vent, extraction hood and tray provide for
2 x hose connections 75
maximum flexibility. Filters must be ordered separately
• ROHS & WEEE compliant
WFE 4S
Mobile fume extraction Technical Data WFE 4S: Pre-filter to extend capacity of
unit purifies
WFE
Dimensions Attributes 450 x 450 x 650 mm (L x W x H)
air up to 8 soldering workplaces
ESD safe
WFE 2S, WFE 4S, WFE 2X
low sound level
F5 Fine particulate air filterOrder No.
(10 pack) 005 87 358 62
T0058735837 Attributes 1
Weight Small,
Mobile fume21 kg portable, compressed air driven
extraction unit purifies air
Mains
up to 8 workplaces
The fume extraction system WFE 4S is user-
fume
The 230V
adjustable extraction
/ 50Hz
pressure control gua-unit
The powerful maintenance free variable speed The fume extraction unit WFE requires clean Up to FE soldering irons can be
friendly with quick and simple installation and
Power rantees optimal air flow regulation for
Absorption 450VA turbine is electronically controlled and has a and oil-free compressed air. The vacuum is ge- connected
each working place independent of the
filter exchange. It has a low noise emission
Sound Level connected51 db(A) maximum capacity of 615 m /h. It has 3 opera- 3
workplaces
level and is small and convenient to locate
Electronic filter control and easy filter ting modes:
nerated by a maintenance-free compressed air Fine dust pre-filter F7
Maintenance-free compressed air
Max. Vacuum exchange 2.800 Pa
within the work area. 1. Standard speed control – selected by the user converter. The contaminated air is purified by a converter
Max. Conveyance wheels 615 m3/h
to allow easy movement
F7 Fine main air filter (10 pack) T0058735836
of the unit
Max. Capacity Remote control Max.with 6 work places
alarm function
irrespective of the load on the system.
The pre-filter is recommended for use with solder bath,
pre-filter and main filter system. A compressed Portable unit1for stand alone applicatio
The high quality components used in the
Standard Noise damped metal housing
connector DN 70 2. Speed limiting control – the pump speed is
automatic soldering, laser or other major dust emitting
applications. It acts as a first stage in the filter process air cleaning filter removes additional odours
Quick and simple installation
3WFE 4S result in low servicing requirements automatically varied to match the load on
increasing the lifetime of the main filter units. The pre-
operating modes
and long system life. To increase filter lifetime
filter can be fixed directly to the top of the WFE 4S or in
the system.
conjunction with the WFE 2S and WFE 2X as an external
caused by the compressed air. This highly
(Normal-/ ECO-/ Regelmode)
and save on energy, the WFE 4S is fitted with
part of the fume extraction system.
Scope3. Economy control – the rate of fume
of supply
efficient filter system makes the WFE a genuine HEPA filter H13
LED for filter control
an automatic airflow speed control - depending Filter box
RS 232 interface for remote control
absorption is maintained at a constant value.
2 x hose connections 75 air recovery system. The filter-lift system allows and
on the number of connected workplaces. To The operating hours and the filter condition
Filters must be ordered separately
fast and convenient filter cartridge replace- wide band gas filter
extend the capacity an external pre-filter can
ESD safe low sound level
are recorded for maintenance purposes.
Order No. 005 87 358 62
H13 + Wide Band Gas Filter T0058735838 1
be fixed directly to the WFE 4S.
ment. The FE (Fume Extraction) soldering irons
(50% Active Carbon, 50% Puratex)
HEPA filter H13
The fume extraction system WFE 4S is user- The powerful maintenance free variable speed
are connected directly to the unit – additional
friendly with quick and simple installation and turbine is electronically controlled and has a
Adhesive Fumes Filter + Wide Band and
filter exchange. It has a low noise emission maximum capacity of 615 m3/h. It has 3 opera-
leads are not required.
Gas Filter T0058735835 1
level and is small and convenient to locate
within the work area.
ting modes:
1. Standard speed control – selected by the user
Fine dust pre-filter F7
(50% Active Carbon, 50% Puratex) wide band gas filter
irrespective of the load on the system.
The high quality components used in the 2. Speed limiting control – the pump speed is ESD safe low sound level
WFE 4S result in low servicing requirements
Technical
automatically varied to match the load on
Data Scope of supply
and long system life. To increase filter lifetime the system.
Maximum capacity
and save on energy, the WFE 4S is fitted with 8 workplaces
3. Economy control – the rate of fume HEPA filter H13 Pre-filter box T0058735862 1
Pre-filter to extend capacity of
an automatic airflow speed control - depending absorption is maintained at a constant value. WFE 4S Fume extraction unit 230/120 V / 50/60 Hz
and Scope
The of supply
pre-filter is recommended for use with
Maximum extraction rate
WFE 2S, WFE 4S, WFE 2X
on the number of connected workplaces. To Technical 615 m³/hData
The operating hours and the filter condition Compact filter
wide band gas filter
extend the capacity an external pre-filter can
solder bath, automatic soldering, laser or other
Sound level are recorded for maintenance purposes.
51 db (A) at 1 m distance
Maximum capacity Consists of: HEPA filter H13, wide band gas filter
2 FE soldering irons
be fixed directly to the WFE 4S. major dust emitting applications. It acts as a
Standard connection pipe system 75 (50 % active carbon, 50 % Puratex) WFE Fume extraction unit
first Option: WFE S with gas filter
stage in the filter process increasing the
purifies air Sound level < 39 db (A) at 1 m distance
Fine dust pre-filter F7 lifetime of the main filter Compact filter for adhesive fumes, consists of: Wide band
Compressed air cleaning filter
units. The pre-filter
Operating voltage 230/120 V / 50/60 Hz
can gas filter (50 % active carbon, 50 % Puratex)
be fixed directly to the top of the WFE4S or
Power input Maximum vacuum
450 VA 20.000 Pa Compact filter
trol Technical
gua- Data Scope of supply
Fine dust filter F7
in conjunction with the WFE2S and WFE2X as
Consists of: HEPA filter H13, wide band gas filter
Fine dust pre-filter F
Volume Extraction
Maximum capacity
Maximum vacuum
8 workplaces
Operating pressure
2.800 Pa 3,5 - 6 bar an external part of the fume extraction system.
ulation for
Maximum extraction rate
WFE 4S Fume extraction unit 230/120 V / 50/60 Hz
615 m³/hDimensions (L x W x H) 450 x 450 x 650 mm Order No. 0V (50 % active carbon, 50 % Puratex)
• Filter box
005 36 256 99 Order No. 0V 005 36 496 99
Air consumption
Compact filter
30 l/min
dentSound level
of the
Standard connection
51 db (A) at 1 m distance
pipe system 75
Consists of: HEPA filter H13, wide band gas filter
17.7 x 17.7 x 25.6 in
(50 % active carbon, 50 % Puratex) Option: WFE S Order
with gasNo.
filter10V • 2 Fine dust filter F7
WFE4S x hose connections 75Order No. 10V WFE4S
Operating voltage 230/120 V / 50/60 Hz Height
Fine dust pre-filter F7 200 mm (7.8 in)
Compact filter for adhesive fumes, consists of: Wide band Filters must be ordered separately
Weight 21 kg / 46.3 lb gas filter (50 % active carbon, 50 % Puratex)
Power input 450 VA
easyMaximum vacuum
filter 2.800 Pa
Diameter 140 mm (5.5 in)
Fine dust filter F7
Order No. 0V 005 36 402 99
Dimensions (L x W x H) 450 x 450 x 650 mm
17.7 x 17.7 x 25.6 in
Weight
Order No. 0V
Order No. 10V
005 36 256 99
WFE4S
2,7 kg / 5.9 lb
Order No. 0V
Order No. 10V
005 36 496 99
WFE4S
Order No. 10V WFE
ement
Weight 21 kg / 46.3 lb
Exploding Drawing for WFE2P Installation Option for a Central System with WFE P
KH E
Stop + Go-support
WDD 161V
WFE P
soldering
iron
desoldering
iron
Installation Option for a Central and Stand Alone System with WFE 20D
right angle
pipe 50 pipe 50 T-piece 50 pipe 50 branch 50
005 36 322 99 005 36 323 99 005 36 344 99 005 36 323 99 005 36 321 99
end seal 50
extraction hose 5 mm 005 36 324 99
pipe clamps 50
> 2,5 m bis max. 10 m connecting nipple 005 36 329 99
005 25 410 00 double socket 50 for extraction hose
WSD 81 connecting element 40-50 005 36 319 99 5 mm
005 36 415 99 connecting nipple pipe 50
005 36 338 99 for hose 17
connecting 005 36 323 99
element 40-50 005 36 358 65
005 36 415 99
WMD 3
end seal 50
ESD
SAF
E
005 36 324 99
extraction
hose 40
005 36 414 00
extension hose 17
005 36 326 99
adapter 17
005 36 343 99
WFE 20D
RS 232 cable (2 m)
005 31 191 99
remote control
005 87 359 09
44 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
FUME EXTRACTION
lation Options
Installation Option for a Central System with WFE 2S
Total pipe length 15m
ion option for a central system Kit1 WF Sloped 60 Kit1 WF Funnel 60
nstallation Options
005 36 572 99 005 36 571 99
E 2S
rubber hose
005 87 627 52 rubber hose rubber hose
connecting piece extraction hose 60 005 87 627 52 005 87 627 52
e length 1 m (0. in) 005 87 627 51
O-ring 3m
connecting piece
005 87 627 51 pipe 50 mm
connecting piece
005 87 627 51
rubber hose
005 87 627 52
stallation option for a central system 005 87 627 53 005 36 576 99 O-ring O-ring connecting piece
Kit1 WF Sloped 60 005 87 627 53 T piece 50 mm 005 87 627 53 005 87 627 51 Kit1 WF Funnel 60
005 36extraction
572 99 arm 60 O-ring 005 36 571 99
ith WFE 2S bench mounting bracket 60
005 36 578 99
WD 1000T
005 87 627 53
extraction arm 60
005 36 574 99 rubber hose
005 87 627 52 nozzle sloped rubber hose rubber hose 005 36 578 99
connecting piece 005 36 577 99extraction hose 60 005 87 627 52 005 87 627 52
otal pipe length 1 m (0. in) 005 87 627 51
O-ring
005 87 627 53
3m
005 36 576 99
connecting piece
005 87 627 51
O-ring
connecting piece
pipe 50 mm 005 87 627 51
O-ring
rubber hose
005 87 627 52
connecting piece WF nozzle funnel
rubber hose
005 87 627 52 005 87 627 53 T piece 50 mm 005 87hose
extraction 627 53
60 005 87 627 51 005 36 573 99
extraction arm 60 O-ring WR3M
connecting piece 3m
damper WFV 60 005 36 578 99 005 87 627 51 hose connection 005 87 627 53
WD 1000TO-ring 50 90 005 36 576 99
005 36 574 99 bench mounting bracket 60
005 87 627 53 005 87 358 48 extraction arm 60
005 36 574 99
nozzle sloped hose connection 50 damper WFV 60 005 36 578 99
005 36 577 99 005 87 358 47 005 36 574 99
extraction hose 60
sold by meter
rubber hose
005 87 627 52 005 87 354 27
pipe system suitable for
connecting piece WFE 2S / WFE 2ES
005 87 627 51 RS 232 cable (2 m)
O-ring 005 31 191 99 and WFE 2X
005 87 627 53
extraction hose 60
sold by meter remote control
WSD 81 rubber hose
005 87 627 52 005 87 354 27 005 87 359 09
connecting piece
metal exhaust hood
005 87 627 51 RS 232 cable (2 m)
O-ring 005 87 358 45 005 31 191 99
005 87 627 53
remote control
WSD 81 005 87 359 09
rubber hose
ion option for a central and
Installation
hose connection 50
Option005for
005 87 627 52
a Central and Stand Alone System with WFE
87 358 47
4S
connecting piece
Kit WF Funnel 60
005 36 571 99
005 87 627 51
one system with WFE 4S hose connection 70 90
005 87 358 33
O-ring
005 87 627 53
Total pipe length 30m rubber hose damper WFV 60
WF extraction arm 60
005 36 578 99
stallation option for a central and hose connection 50
005 87 358 47
005 87 627 52
005 36 574 99 Kit WF Funnel 60
eand
length 0system
m (1181.10
with in)
connecting piece 005 36 571 99
005 87 627 51 WF nozzle funnel
alone WFE 4S hose connection 70 90
005 87 358 33
O-ring
005 87 627 53
005 36 573 99
WF extraction arm 60
damper WFV 60 005 36 578 99
rubber hose pre-filter box 005 36 574 99
end seal 75
WD 2000M 005 87 358 55
WFE 8S
RS 232 cable (2 m)
005 31 191 99
bench mounting bracket 60
005 36 574 99
RS 232 cable (2 m) damper WFV 60
005 31 191 99
005 36 574 mounting
bench 99 bracket 60
remote control 005 36 574 99
005 87 359 09
damper WFV 60
remote control
005 87 359 09
005 36 574 99
1
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 45
FUME EXTRACTION
P/code P/code
SYS50 SYS75
Tube Reductions
Exhaust Assembly
DN100 90° bow with socket for WFE10 and WFE35 T0053635399
Exhaust flange for DN100 tube (only for use with T0058735919
WFE10)
Exhaust flange for DN100 tube (only for use with T0058735840
WFE4S)
46 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Volume Extraction
Accessories When soldering, gluing or working with The Weller® 60 mm (2.36 in) flexible extraction
solvents it is important to place the nozzle arms allow the quiet and efficient capture of
005 87 358 48 Hose connection 50, 90° for WFE 2S and WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.
005 87 358 48 Hose Extraction Hose,
connection 50, 90° for WFE40mm
2S and WFE DIA. Sold
4S, e.g. for byconnection
the direct the metre.
of T0053641400
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.
005 87 358 33 Hose connection 75, 90° for WFE 2S and WFE 4S, e.g. for connection to a stand alone
005 87 358 33 system75,
Hose connection by90°
means of 75
for WFE mmWFE
2S and (2.95
4S,in)
e.g.pipe or 75 mmto(2.95
for connection in)alone
a stand extraction hose. Plastic, black.
system by means of 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
Extraction Hose, 60mm (2.36 in), for connection to T0053657699
pipe system 50. 3m (118.11 in). Plastic, grey/black,
0051387 353 13 Extraction hose 75,in),øfor
75connection
mm (2.95toin),
pipefor connection to pipe system 75.
005 87 353 flexible.
Extraction hose 75, ø 75 mm (2.95 system 75.
Sold
Sold by metre. by metre.
Plastic, Plastic,
grey/black, grey/black, flexible.
flexible.
005 36 576 99 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
005 36 576
3 m99 Extraction
(118.11 in). hose flexible.
Plastic, grey/black, 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Extraction
3 m (118.11Hose, 60mm
in). Plastic, (2.36
grey/black, in), for connection to
flexible. T0058735427
pipe system 50. Sold by metre. Plastic, grey/black,
005 87 354 27 flexible.
Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Sold by metre. Plastic, grey/black, flexible.
005 87 354 27 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Sold by metre. Plastic, grey/black, flexible.
005 87 358 79 Hose clamp 50 – 70 mm, (1.96 - 2.75 in), 2 units, for securing extraction hose 50.
Connection Cone for Extraction Hose T0053641599
005 87 358 79 Hose clamp 50 – 70 mm, (1.96 - 2.75 in), 2 units, for securing extraction hose 50.
005 87 358 31 Hose clamp 70 – 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75.
005 87 358 31 Hose clamp 70 – 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75.
17mm DIA x 5m Extension Hose. Used where fume T0053632699
1 extraction iron is further than 2.5m from pipe system.
1
Adaptor from DN17 to 5mm suction hose T0053634399
(M8 x 1)
005 87 358 32 Hose connection 75 for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
P/code P/code
50mm 75mm
005 87 358 48 Hose connection 50, 90° for WFE 2S and WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 47
FUME EXTRACTION
Extraction table, active surface 600 x 350mm connectable from sides or below for T0053637099
tube system DN40, especially for the extraction of diagreeable solvent or adhesive
smells.
Metal table extraction hood 200 x 100mm connectable to the DN40 tube system. T0058735845
Suitable for the extraction of solder fume in hot air applications or for
work at small circuit boards.
One joint extraction arm, flexible, for bench assembly Ø 50mm, includes clamp holder, T0058735849
air flow adjustable, ESD Safe
W Stativ extraction arm, 60mm diameter, flexible extraction arm with articulated joint T0053659899
NE
with articulated joint and airflow control valve and bench clamp. ESD safe.
arm.
WFAN 50 Extraction arm Ø 50 mm, flexible, with nozzle Ø 50 mm, ESD safe, needs300 mm 300 mm
200 mm
T0053637499
WFFMP 50 seal
100 mm 100 mm 100 mm
150 mm 150 mm 150 mm
0 mm 0 mm 0 mm
100 mm 100 mm
200 mm 200 mm
300 mm 300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
0 mm
0 mm
0 mm
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.
WFAF 50 Extraction arm Ø 50 mm, flexible, with slot 210 x 20 mm, ESD safe, needs T0053637299
100 mm
200 mm
300 mm
WFFMP 50 seal
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
soldering operations uses extraction hose 60.
005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
005 36 578 99 Flexiblelength
Maximum extraction arm,
1 m (39.37 in),60ESD
mmsafe.
(2.36 in)1diameter, for sloped and funnel nozzles.
Maximum length 1 m (39.37 in), ESD safe.
EW
OrderNNo. Flexible Extraction arm, 60mm (2.36 in) diameter, for sloped and funnel nozzles.
Description T0053657899
Maximum length 1m (39.37 in), ESD Safe
005 36 598 99 Stativ extraction arm, 60 mm diameter, flexible extraction arm 300 mm 300 mm 300 mm
005 36 577 99
005 36 577 99
with articulated joint and airflow control valve and bench clamp. ESD safe.
WF 60 sloped nozzle for flexible and stativ extraction arm.
WF 60 sloped nozzle for flexible and stativ extraction arm. 150 mm
200 mm
300 mm
100 mm
200 mm 150 mm
200 mm
300 mm
100 mm
200 mm 150 mm
200 mm
300 mm
100 mm
200 mm
ESD SAFE
0 mm 0 mm 0 mm
100 mm 100 mm 100 mm
W
100 mm 100 mm
005 36WF60
598 99sloped
Stativ extraction
60mmarm, 60 mm diameter, flexible extraction
stativarm
NE nozzle, diameter, for flexible and extraction arm. T0053657799
300 mm 300 mm
200 mm 200 mm
300 mm
200 mm 300 mm
100 mm
100 mm
200 mm
300 mm 200 mm
300 mm
200 mm 300 mm
100 mm
100 mm
200 mm
300 mm 200 mm
300 mm
200 mm 300 mm
100 mm
100 mm
200 mm
300 mm 200 mm
0 mm
0 mm
0 mm
300 mm 300 mm
with articulated joint and airflow control valve and bench clamp. ESD safe.
200 mm
100 mm
100 mm
300 mm
200 mm
100 mm
100 mm
300 mm
200 mm
100 mm
100 mm
300 mm
0 mm
0 mm
0 mm
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.
Extraction arm, can be mounted directly to work bench, ESD Safe 100 mm
200 mm
T0053634899
100 mm
005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
300 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm 200 mm
005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
Maximum
Extraction arm,length
flexible, 1 ESD
m (39.37 in),useESD
Safe, metal blacksafe. T0058735853
300 mm
200 mm
100 mm
100 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
0 mm
0 mm
0 mm
100 mm 100 mm
1
200 mm 200 mm
1
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm,
300 mm100 mm (3.93 in) diameter. 300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
0 mm
0 mm
0 mm
W WF funnel nozzle 60, for flexible and stativ extraction arm, T0053657399
NE 100mm (3.93 in) diameter.
100 mm
200 mm
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
soldering operations uses extraction 100 mm
hose 60.
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
005 36 380 99 WFDD 50 Extraction plate with 1 m (39.37 in) flexible hose, 300 x 210 mm
(11.81 x 8.26 in), for adhesive and solvent fume extraction. ESD safe.
005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
48 Note: Some of the abovesoldering operations
items may require a freightuses
leadextraction
time. Producthose 60. are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
depictions
Accessories
FUME EXTRACTION
Order No. Description
Accessories for Tip Suction 005 36 574 99 WFV 60 Stop valve. Table connector for 60 mm (2.36 in) flex arm and extraction tube
including air flow valve.
The following products are suitable for 50mm Diameter. When using a 75mm Diameter Hose, a tube reducer will be required (see page 42)
Volume Extraction
Description Material No.
005 36 575 99 Bench mounting bracket. Maximum width of clamp 100 mm (3.93 in).
100 mm (3.93 in) diameter. Metal, black.
Extraction hood PE transparent, 296 x 248 mm (11.65 x 9.75 in) T0053634999
Accessories
WFFMP 50 seal,Extraction
locking adjustable T0053637199
Volume Extraction
005 36 348 99 arm, can be mounted directly to work bench, ESD safe.
Order No. Description
005 36 574 99 WFV 60 Stop valve. Table connector for 60 mm (2.36 in) flex arm and extraction tube
including air flow valve.
Accessories for WFE 2X Trolley for fume extraction unit WFE2X. T0053659299
Remote control 005 87Order
627 50No. 60/50 Adapter
Description
for applications using the 60 mm (2.36 in) extraction system
Order No. Description
for tip and volume 005 36 591connected
99 to the former
Hanging 50WFTB
device forand WFFMP50.
table mounting for fume extraction unit WFE 2X.
005 87 359 09 Remote control for fume extraction units WFE 20D, WFE 2S, WFE 4S and WFE 8S.
extraction units Remote
005 87 627 53control for O-ring,
Silicone tip and 50 volume
mm (1.96 in)extraction
diameter. units
Switching unit on/off, speed setting (only WFE 2S / WFE 4S), filter status display.
Seal for 60 mm (2.36 in) flex arm directly on WFE 2S and WFE 2ES.
Remote control for fume extraction units WFE20D, WFE2S, WFE4S and WFE8S. T0058735909
Switching
005 36 593 99005
005 87
36 358
592 99
Remote unit on/off,
53control
Trolley speed
Extraction arm,setting
forextraction
for fume fume (only
flexible,
extraction
unit WFE 2XWFE2S/WFE4S),
ESD
unitsafe,
WFE2metal
with 2X. black.
m (78.74 filter status display.
in) cable.
Remote control for fume extraction unit WFE2X with 2m (78.74 in) cable.
Interface cable RS 232, 2m (78.74 in) for remote monitoring by PC (type 1:1). T0053659399
Accessories for WFE 2X 005 31 Order
191 99No. Interface cable RS 232, 2 m (78.74 in) for remote monitoring by PC (type 1:1).
Description T0053119199
005 36 591 99 Hanging device for table mounting for fume extraction unit WFE 2X.
005 36 349 99 Extraction hood PE transparent, 296 x 248 mm (11.65 x 9.76 in).
005 87 627 50 60/50 Adapter for applications using the 60 mm (2.36 in) extraction system
Spare filter for WFE8S:
Order No. Spare filter WFE 8S: Order No. WFE 2X: to the former
Spare filter forconnected Order50WFTB
No. and WFFMP50.
Spare filter for WFE 4S:
Replacement pre-filter T0053659499
005 36 594 99 Replacement pre-filter 005 36 590 99 Replacement compact filter 005 87 358 37 Fine dust filter F5 (10 pieces)
Replacement compact filter (4 pieces in one pack) Consists of: HEPA filter H13, wide T0053659599
005 36 595 99 Replacement compact filter Consists of: HEPA filter H13, 005 87 358 36 Fine dust filter F7 (10 pieces)
band gas filter (50% active
wide band gas filter (50 %
carbon, 50% Puratex)
005 87 358 38 Compact filter
(4 pieces in one pack)
1
Consists of: HEPA filter H13, active carbon, 50 % Puratex) Consists of: HEPA filter H13,
wide band gas filter (50 % Spare filter for WFE2X: wide band gas filter (50 %
active carbon, 50 % Puratex) Replacement compact filter active carbon, 50 % Puratex) T0053659099
Consists of: HEPA filter H13, wide band gas
005 87 358 35filter (50%Adhesive
Option: active fume
carbon,
filter 50% Puratex)
(50 % active carbon, 50 %
Accessories for WFE 2X Order No. filter for
Spare Description
WFE4S: Puratex)
Fine
005 dust99filter F5
36 591 (10 pieces)
Hanging device for table mounting for fume extraction unit WFE 2X. T0058735837
Fine dust filter F7 (10 pieces) T0058735836
Compact filter T0058735838
Consists of: HEPA filter H13, wide band gas filter (50% active carbon, 50% Puratex)
Order No. Spare filter for WFE 2S: Order No. Spare filter for WFE
Option: fume2ES: Order No. carbon,Spare filter WFE 2S/WFE 4S:
005 36 592Adhesive
99 Trolley filter
for fume(50% active
extraction unit WFE 2X.50% Puratex)
005 87 358 84 Fine dust filter F5 (10 pieces) 005 87 627 01 Fine dust filter F5 (10 pieces) 005 87 358 60 Filtering ash F7 for large T0058735835
005 87 358 85 Fine dust filter F7 (10 pieces) Compact filter quantities of dust
005 87 358 83 Compact filter Consists of: HEPA filter H12, 005 87 359 24 Filtering fine dust for sticky of
Spare filter for WFE2S:
Consists of: HEPA filter H13,
Finewide
dustband gas filter
filter F5 (10 pieces) arrears (e.g. large quantities of
T0058735884
wide band gas filter (50 % active (10 % active carbonate foam) liquid flux)
Fine dust filter F7 (10 pieces) T0058735885
carbon, 50 % Puratex)
Compact filter T0058735883
005 87 358 95 Option: Adhesive fume filter
Consists of: HEPA filter H13, wide band gas filter (50% active carbon, 50% Puratex)
(50 % active carbon, 50 %
1 Puratex)
Option: Adhesive fume filter (50% active carbon, 50% Puratex)
T0058735895
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 49