In-line compressor evens The Dyna Comp is powered by one Run a cable from your guitar Rotate OUTPUT knob clockwise Input Impedance 1 M out your signal 9-volt battery (remove bottom plate to the Dyna Comps INPUT jack to increase overall volume of Output Impedance 10 k Especially useful for increased to install), a 9-volt AC adapter such and run another cable from the effect or counterclockwise to Nominal Input Level -5 dBV sustain with stable dynamics as the Dunlop ECB003/ECB003E, Dyna Comps OUTPUT jack to decrease it. Nominal Output Level -12 dBV or a DC Brick power supply. your amplifier. Rotate SENSITIVITY knob Nashville studio standard Noise Floor* 95 dBV Start with all controls at clockwise to increase sensitivity T.H.D 0.2% Typ. at -20 dBV, 1 kHz 12 oclock. (more compression) or counter- clockwise to decrease it (less Max Compression 36 dB Turn the effect on by depressing compression). Attack Time 5 ms the footswitch. Release Time 1s Bypass True Hardwire CONTROLS Current Draw 3.3 mA OUTPUT knob controls overall Power Supply 9 volts DC effect volume
SENSITIVITY knob sets *A-weighted compression ratio FOOTSWITCH toggles effect on/ bypass (red LED indicates on) SAMPLE SETTINGS