Академический Документы
Профессиональный Документы
Культура Документы
A. Tools
Tools yang perlu disiapkan untuk koneksi ke switch :
1. RS232 Cable
a. Show Running-Config
Biasa digunakan untuk melihat konfigurasi switch dan dapat digunakan sebagai backup
Contoh :
show running-config
Building configuration...
!
vlan list 1
vlan list 200
vlan list 800
vlan list 802-803
vlan list 808-815
!
interface vlan 803------ > Digunakan untuk Alamat switch
ip address 10.31.29.52 255.255.255.192
out_index 27
description MNG-Switch
!
interface null1
Riyan Ardiya N Page 6
out_index 1
!
interface smartgroup1 --------- > Konfigurasi Group Vlan
out_index 28
description to-CRB_02N180
switchport mode trunk
switchport trunk native vlan 1
switchport trunk vlan 842
switchport trunk vlan 854-855
switchport trunk vlan 857-859
interface gei_1/21
out_index 23
hybrid-attribute copper --------- > Koneksi untuk Copper/Optic Cable
negotiation auto
switchport access vlan 1
switchport qinq normal
!
ip route 10.17.116.93 255.255.255.255 10.31.29.1
ip route 10.17.9.250 255.255.255.255 10.31.29.1
ip route 10.31.29.250 255.255.255.255 10.31.29.1
input 7708641 Bps, output 4196217 Bps ----------- > Max Traffic
Input:
Oversize :0 CRC-ERROR : 0
Dropped :0 Fragments : 0
Jabber :0 MacRxErr : 0
Output:
LateCollision: 0
Total:
Contoh :
An alarm 541 level 6 occurred at 02:21:08 10/01/2012 UTC sent by MCP %PORT-
SMARTGROUP% Interface inactive from smartgroup 1 on gei_1/15
An alarm 512 level 6 cleared at 02:20:15 10/01/2012 UTC sent by MCP %PORT% Interface
up on gei_1/15