Академический Документы
Профессиональный Документы
Культура Документы
contents
Major Sections
FRAME & CHASSIS ........................... 4 WHEELS & TIRES ............................ 36
SUSPENSION & DRIVELINE.............. 6 ENGINE........................................... 39
STEERING ....................................... 20 EXHAUST ........................................ 68
With a 15-year run through the heart of changing times, the Shark
generation witnessed a move from raw towards refined. Tri-carbs,
big-blocks and track worthy suspensions dropped off dealer order
forms. Chrome bumpers yielded to urethane caps. Fastbacks replaced
www.zip-co
Order toll-free
Subject Index
1-800-962-9632 or 804-746-2290
orvette.com
Locks set....................................... 99
Luggage rack.............................. 166
Manuals...................................... 178
Manual transmission .............. 78-79
Master cylinder ............................ 30
Rocker moldings ........................ 164
Seat belts.................................... 145
Seat ..................................... 142-144
Shifter, automatic transmission... 75
Shifter, manual transmission.. 80-81
Sunvisors .................................... 147
Suspension, front........................ 6-9
Suspension, performance ............ 19
Suspension, rear ..................... 10-14
Suspension rebuild kits...... 6, 10, 19
Water pump ................................. 64
Weatherstrip ....................... 175-177
Wheels..................................... 36-37
Wheel bearings, front.................... 9
Wheel bearings, rear ................... 14
Mirrors, outside ......................... 166 Shifter tunnel insulation........ 77, 92 Suspension tools .......................... 14 Window regulator...................... 100
Mirrors, inside............................ 151 Shock absorbers................. 9, 10, 19 TCS solenoid ................................ 77 Windshield frame......................... 89
Mufflers ........................................ 71 Side exhaust................................. 70 T-top.................................... 172-173 Windshield moldings, interior... 151
Neutral safety switch ................... 75 Side marker lights...................... 134 Tachometer ................................ 155 Windshield washer ............. 102-103
Oil fill tube & dipstick.................. 57 Sill plates .................................... 139 Tachometer cable......................... 59 Wipers ........................................ 103
Oil pan & filter........................ 56-57 Smog pump ................................. 46 Taillights ..................................... 135 Wiper door.......................... 104-105
Paints.......................................... 182 Spare tire...................................... 38 Temperature sender ............ 52, 122 Wiring harnesses ................ 120-127
Park brake ............................... 34-35 Spark plugs & wires ..................... 61 Thermostat housing .................... 49
Park brake console..................... 153 Speed nut kit.............................. 169 Tie rod end................................... 25
Park lights .................................. 134 Speedometer.............................. 155 Tie strap kits............................... 128
Power brake ................................. 31 Speedometer cable ...................... 76 Timing chain & cover .................. 53
Power steering........................ 26-27 Speedometer driven gear............ 76 Tires.............................................. 38
Power window ........................... 100 Spindle, rear................................. 14 Trailing arms ........................... 12-14
Quarter panels, interior ............. 147 Splash shields.......................... 91-92 Transistor ignition........................ 59
Radiator...................................... 106 Spoiler, stock.............................. 165 Transmission, automatic .............. 74
Radiator hoses ........................... 107 Springs, front ................................. 8 Transmission, manual ............. 78-79
Radiator shroud .................. 110-111 Springs, rear................................. 11 Transmission mount..................... 77
Radiator support................. 108-109 Starter .......................................... 48 Trim ring ...................................... 36
Radio & speaker ......................... 156 Steering box................................. 24 Turn signal switch................... 20-22
Rally wheel ................................... 36 Steering column ..................... 20-23 Universal joints ............................ 18
Rear storage compartment ....... 148 Steering linkage ........................... 25 Vacuum advance .......................... 59
Rear window & trim .................. 149 Steering wheel........................ 20-23 Vacuum system .......................... 131
Restoration supplies .................. 182 SteeroidsTM rack & pinion ............ 24 Valve covers & bolts ............... 54-55
Rivets ............................................ 89 Stereo systems .................... 156-157 Vapor canister .............................. 52
Ring & pinion............................... 15 Strut rods ..................................... 10 Voltage regulator......................... 44
order anytime!
narrow by price
multiple views
drop-down menus
Chassis Components
Frame Crossmembers Front Crossmember Repair Tool
BU-446 68 Front bumper V support........................... (1)
219.95 Designed by a fellow Corvette
BU-318 69-72 Front bumper V support........................... (1)
199.95 enthusiast, tool slides up inside front
BU-354 68-72 Front bumper support mount bolts, crossmember and gently pulls dented
327 & 350, A headmark (24 pcs)........... 16.50 kit section out to its original shape. No
BU-358 68-72 Front bumper support mount bolts, cutting, welding or heating required.
427 & 454, A headmark (30 pcs)........... 18.50 kit Instructions included.
M-2771 68-79 #2 transmission crossmember, 4-speed (A)... 345.00
M-2772 68-79 #2 transmission crossmember, Automatic (A) 345.00 TL-146 68-82 Front crossmember repair tool .................... 149.95
BL-502 68-82 #2 transmission crossmember mount bolts... 8.50 set
M-2513 68-79 #3 differential front crossmember, includes
differential front support bracket (A)....... 375.00
M-2627 68-79 #3 crossmember differential support
M-3724 68-79
bracket, included on M-2513 (A)..............
#4 crossmember, above rear axle (A)..........
62.50
195.00
Chassis Restoration Kit (sample kit shown)
SU-317 68-79 Rear end support crossmember w/new Includes custom frame stencil,
cushions installed (A) ................................ 419.00 white spray stencil ink, paint
SU-7 68-79 Rear end support crossmember cushion, crayons for shim, frame and
4 diameter (2 per car) (A) ....................... 64.95 each engine marks, 6-8 inspection
SU-916 68-79 Rear end support crossmember cushions, paints, shim tape and technical
4 diameter (pair) (A) ............................... 119.95 pair bulletins. No Discount.
SU-609 68-79 Rear end support crossmember to frame
mount bolts & washers (A) ....................... 3.00 set
SU-350 68-79 Rear end support cushion receiver, welds CR-300 68 Chassis restoration kit .................................. 136.95
to frame, receives mount bolt (A) ............ 36.50 each CR-301 69 Chassis restoration kit .................................. 136.95
M-3296 68-70 Rear frame crossmember (A) ....................... 109.50 CR-302 70 Chassis restoration kit .................................. 136.95
M-3299 71-74 Rear frame crossmember (A) ....................... 109.50 CR-303 71 Chassis restoration kit .................................. 136.95
CR-304 72 Chassis restoration kit .................................. 136.95
M-3481 68-72 Chassis crayon marker set (4) ...................... 12.95
MG-113 68-72 White stencil spray ink ................................. 10.95
SU-609 Note: Frame stencil requires car serial number and other information call your Zip
sales representative for details. Kit cannot be shipped by air.
rear frame
crossmember
A6
frame rail
repair section #4 crossmember A8
A7
A11
A5
#4 body mount bracket
receiver
B A4
cushion
rear end support
Frame Rail Repair Section crossmember
#3 crossmember
A3 mount bolt & washer
Frame Repair
M-3280 68-82 #1 crossmember lower repair (A1).............. 145.00
Frame Rail Repair
(1)
M-2660 ZM-2511 Zip has many other frame-related repair components listed in their respective
sections within this catalog including shock mount brackets, brake line brackets,
park brake cable brackets and motor mounts. Reference applicable sections for
descriptions and availability.
Whether or not your chassis requires rust repair, you will want to strip and refinish it during a comprehensive restoration. There are various
methods for removing paint, undercoating, rust, and other surface contaminants including abrasive blasting, chemical stripping and electro-
chemical immersion. With electro-chemical immersion the chassis is placed in a large vat of liquid and subjected to an electric current. The
chemical bath and current together completely strip the chassis inside and out. This is the most thorough method of stripping, but it must be
done by a specialty shop with the right equipment and requires that the inside of the chassis be coated as well as the outside to prevent future
rust problems. Chemical stripping is effective but not recommended because it is very difficult to prevent the stripper from getting into the
areas between overlapping metal. Abrasive blasting is the most popular stripping method because its relatively inexpensive and very effective.
The coarse surface texture it leaves behind provides excellent grip for the new coatings you will apply, but it is important to thoroughly clean
out all traces of the blast media to prevent it from clogging the chassis water drain holes.
For the ultimate in authenticity, refinish your chassis with the original asphalt-based paint; but, for maximum durability and corrosion
protection, use a two-part epoxy paint or have it powder coated. For the best of both worlds use epoxy primer and sealer undercoats with
old-fashioned asphalt based topcoats.
ZSU-67
ZSU-576 ZSU-68
SU-1135
Polyurethane Bushings
Rubber bushings can rot, deform or
simply wear-out. Poly replacements
last virtually forever plus deliver
quicker response along with more
predictable handling. Graphite
impregnated to prevent squeaks.
SU-309 68-82 Control arm bushings, polyurethane........... 74.95 car
Zip Products
SU-1135 68-69 Front suspension kit, reproduction.............. 579.95 set www.corvettepartsblog.com
SU-1136 70-82 Front suspension kit, reproduction.............. 579.95 set
SU-765 SU-757
SU-347
ZSU-506 SU-737 SU-1119
SU-995
SU-616
SU-608 SU-729
bushing
front mount bolt SU-611
nut plate
A SU-340 WS-4527
(4) (2) SU-346
Control Arm Mounting
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 SUSPENSION & DRIVELINE 7
68-82_26_006-019_Susp&Driveline_priced 6/11/10 2:11 PM Page 8
SU-1150
SU-653 SU-1150 68-82 Front sway bar end link bushings (8).......... 25.95 set
SU-1223 68-72 Front sway bar 3/4 frame bushings ........... 24.95 pair
SU-1225 73-74 Front sway bar 13/16 frame bushings ....... 24.95 pair
SU-1226 68-79 Front sway bar 7/8 frame bushings ........... 24.95 pair
SU-653 68-82 Front sway bar kit, 1................................... (1)
139.95 kit SU-1224 68-72 Front sway bar 15/16 frame bushings ....... 24.95 pair
SU-652 68-82 Front sway bar kit, 1 1/4 ............................ (1)
179.95 kit SU-1227 68-82 Front sway bar 1 frame bushings .............. 24.95 pair
SU-1228 68-82 Front sway bar 1 1/8 frame bushings........ 24.95 pair
SU-1147 68-82 Front shock upper grommets (4) ................ 13.95 set
Shocks
SU-88F 68-82 Shock, Delco gas-charged (C)...................... 41.95 each
SU-1160 68-82 Shock, replacement ...................................... 32.95 each spindle
arm dust shield
MF-266 68-79 Shock absorber decals, STD, includes
(2) EK & (2) EM decals ....................... 6.00 set seal
upper
MF-267 68-79 Shock absorber decals, F41, includes mount SU-558
(2) EN & (2) EP decals ........................ 6.00 set bolt SU-559
SU-612 68-82 Shock mount lower bolts (4) ....................... 3.50 car
SU-996 68-82 Shock mount upper nuts (C) ....................... 1.00 pair inner
wheel
SU-1192 68-82 Shock upper bushings, rubber (1 shock)..... 8.50 pair bearing
SU-1147 68-82 Shock upper bushings (restoration poly)
rotor
(4 pcs) ........................................................ 13.95 car
SU-1187 68-82 Shock upper retainer washer, correct (C) ... 4.50 each spindle
washer
inner bearing seal hub nut
Shock Mount
upper nut axle
C retainer washer grease
cup
upper mount kit bushing
outer
wheel
D bearing
Front Spindles
U-121 68 Spindle, reconditioned (D) .......................... Call
U-280 69-82 Spindle, reconditioned (D) .......................... Call
shock
U-122 68 Spindle arm, steering, reconditioned,
specify PWR (LH or RH) (D) ...................... Call
coil spring
U-234 69-82 Spindle arm, steering, reconditioned,
specify PWR (LH or RH) (D) ...................... Call
SU-613 68 Spindle arm mount bolts w/nuts (4)........... 5.75 car
MF-266 ZSU-667 69-82 Spindle arm mount bolts w/nuts (4)........... 6.00 car
SU-415 68-76 Spindle dust shield, silver (LH or RH) (D) ... 29.50 each
SU-416 77-82 Spindle dust shield, gold (LH or RH) (D) .... 29.50 each
SU-998 68-82 Spindle dust shield upper mount bolts (D) 15.75 pair
ZSU-319 68 Spindle dust shield to spindle seals (D) ...... 5.50 pair
AC-Delco Shock Absorbers ZSU-643 69-82 Spindle dust shield to spindle seal (D)........ 2.50 each
Smooth-riding AC-Delco shocks are the SU-561 68 Spindle hub nuts & cotter keys (D) ............. 6.50 set
perfect replacement for your Corvettes SU-560 68 Spindle hub nut washer (D) ........................ 2.00 each
factory hydraulic dampers. Lifetime SU-558 69-82 Spindle hub nut (D) ..................................... 6.50 each
warranty. Sold each or in car set. SU-559 69-82 Spindle hub nut washer (D) ........................ 5.00 each
SU-998
SU-415
Replacement Shocks
Built by Sachs the original equipment ZSU-643
(2)
supplier of shocks for the C5 and C6
Corvette. Enjoy superior ride control Wheel Bearings & Rotor
without sacrificing ride quality. Sold
each or in car set. SU-380 68 Axle grease cup, w/dimple (D) .................... 16.95 each
SU-379 69-82 Axle grease cups (D) .................................... 7.50 each
SU-1160 68-82 Replacement gas shock, front...................... 32.95 each M-3041 68-82 Static collector, under grease cup ............... 16.75 each
SU-1161 68-82 Replacement gas shock, rear ....................... 32.95 each DB-561 68-82 Rotor w/rivet holes (D) ................................ (1)
59.95 each
SU-1174 68-82 Replacement gas shocks package ................ 119.95 car DB-481 68-82 Rotor to hub rivets (10) ............................... 6.00 set
SU-76 68 Inner wheel bearing (D) .............................. 12.50 each
SU-80 68 Inner wheel bearing seal (D) ....................... 12.50 each
SU-77 68 Outer wheel bearing (D).............................. 12.50 each
SU-78 69-82 Inner wheel bearing (D) .............................. 12.50 each
Front Wheel Bearing Kit SU-645
ZSU-81
SU-79
69-82
69-82
Inner wheel bearing seal (D) .......................
Outer wheel bearing (D)..............................
7.50
12.50
each
each
Zip has made the job of replacing front
wheel bearings a little easier by assembling SU-380 SU-379 M-3041
a complete kit. Includes inner and outer (2) (2)
Timken bearings and inner seal.
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST SUSPENSION & DRIVELINE 9
68-82_26_006-019_Susp&Driveline_priced 8/2/10 11:26 AM Page 10
lower nut
lower mount
grommet E
Rear Shock
tall nut
mount
bracket
lip washer
HD Shock Mount Tool
Left-hand (LH) = drivers side; right-hand
Use this heavy-duty breaker along with an bracket bolt
(RH) = passenger side lip
air hammer to remove frozen shock mounts. SU-824 washer
Available with .401 or .498 shank. strut rod
F camber bolt
SU-824 HD shock mount removal tool, .498 shank............... 54.95
Rear Strut Rod
SU-824A HD shock mount removal tool, .401 shank............... 54.95
ZSU-93
All hardware needed to rebuild rear suspension: new strut rods and
camber bolts, shock mounts, trailing arm mounts and shims, differential SU-388
cushions, spring outer mounts and bolts, and half shaft bolts with locks.
SU-1000 SU-470
(4) WS-438
Rear Spring
ZSU-59 68-75 Spring, 7-leaf HD (G) ................................... (4)
139.95
SU-1134 68-75 Spring, 7-leaf HD, reproduction (G)............ (4)
239.95 outer bolt outer mount kit
ZSU-63 68-77 Spring, 9-leaf STD (G) .................................. (4)
139.95
flat washer
SU-1234 68-77 Spring, 9-leaf, reproduction (G) .................. (4)
239.95
cushion
SU-1235 68-77 Spring, 9-leaf HD, reproduction (G)............ (4)
239.95
ZSU-515 78-82 Spring, 9-leaf (steel) (G) .............................. (4)
149.95
SU-1236 78-82 Spring, 9-leaf (steel), reproduction (G)....... (4)
289.95
Note: Check width of original spring before ordering, 68-77 springs are 2 1/4 wide; spring
78-82 springs are 2 1/2 wide.
SU-94 68-82 Spring center bolt w/nut, holds spring
leaves together .......................................... 4.00 cup
SU-82 68-77 Spring center mount plate (G) .................... 19.50
SU-540 78-79 Spring center mount plate (G) .................... 19.50 cushion
center center mount
U-520 80-82 Spring center mount plate........................... Call G mount bolt
SU-771 77-79 Spring center mount plate spacers, FE7...... 11.50 pair plate
Rear Spring & Mount
SU-833 68-75 Spring center mounting bolts, 7-leaf
spring, 9/16x 3 5/16, WB headmark,
black phosphate (4) (G)............................ 12.50 car
SU-832 68-77 Spring center mounting bolts, 9-leaf
spring, 9/16x 3 9/16, WB headmark,
black phosphate (4) (G)............................ 12.50 car Composite Rear Spring
ZBL-350 78-79 Spring center mounting bolts, Ready to take your Corvette
7/16x 3 1/4 (4)....................................... 10.50 car to a new level? Hypercos
ZBL-420 80-82 Spring center mounting bolts (3)................ 12.50 car composite spring elevates
SU-92 68-77 Spring liner, order (5) for 7-leaf spring cornering ability, road feel
& (7) for 9-leaf spring ............................... 7.75 each and initial response all while maintaining a comfortable ride. Epoxy
SU-1121 68-77 Spring liner kit (7 pcs) ................................. 44.50 matrix leaf is 70% lighter than steel yet provides extraordinary strength
WS-454 68-82 Spring outer cushions, rubber (4) (G)......... 11.95 car and extended service life. Maintains factory stance.
SU-307 68-82 Spring outer cushions, polyurethane (4) (G) 16.95 car SU-1074 68-82 Hyperco composite spring, 330 lb............... 329.95
SU-430 68-82 Spring outer cushion cup, mounts on SU-1075 68-82 Hyperco composite spring, 360 lb............... 329.95
trailing arm or spring (G) ......................... 2.50 each
SU-999 68-82 Spring outer bolt flat washer
(4 per car) (G) ........................................ 3.00 each
BL-484 68-82 Spring outer bolt nut & cotter pin .............. 2.00 pair
SU-392
SU-56 68-82 Spring outer mount kit, rubber (G)............. 29.95 car
SU-555 68-82 Spring outer mount kit, polyurethane (G).. 39.95 car SU-1230 68-82 Differential front cushions ........................... 15.95 pair
SU-392 68-82 Rear sway bar end link bushings, includes
steel shell as original (4) ........................... 49.95 set
Fiberglass Rear Spring SU-1221 68-74 Rear sway bar 9/16 frame bushings .......... 24.95 pair
Reduces unsprung weight, delivers an improved ride and wont SU-1223 68-72 Rear sway bar 3/4 frame bushings ............ 24.95 pair
wear out. Includes differential mount bolts, heat shield, and 7 1/4 SU-1222 75-82 Rear sway bar 7/16 frame bushings .......... 24.95 pair
adjustable outer spring bolts with rubber cushions. SU-1146 68-82 Rear shock lower grommets ........................ 7.95 pair
SU-1151 68-82 Rear spring outer cushions (4) .................... 32.95 set
SU-693 68-77 Fiberglass rear spring, 315 lb....................... 339.95
SU-694 68-77 Fiberglass rear spring, 340 lb....................... 339.95
SU-695 68-77 Fiberglass rear spring, 355 lb....................... 339.95
SU-696 78-79 Fiberglass rear spring, 315 lb....................... 339.95 Zip Gift Cards!
SU-697 78-79 Fiberglass rear spring, 340 lb....................... 339.95
SU-698 78-79 Fiberglass rear spring, 355 lb....................... 339.95
SU-699 80-82 Fiberglass rear spring, 340 lb....................... 339.95
SU-700 80-82 Fiberglass rear spring, 355 lb....................... 339.95
SU-398 63-82 Outer spring mount kit, adjustable,
8 long bolt for greater adjustment ......... 36.95 set
SU-693
bolt kit
frame bumper
Rear Sway Bar Kit
Keeps your Corvette flat during spirited driving. Also a cost effective
alternative if replacing a tired factory bar. Includes heavy-duty sway bar,
bolt
stabilizer links, mount brackets and poly bushings.
bushing
M-3295
SU-651 WS-640
(2)
shim pin
WS-440 shim
SU-651 68-82 Rear sway bar kit, 3/4................................. (1)
124.95 kit (2)
SU-650 68-82 Rear sway bar kit, 7/8................................. (1)
129.95 kit I
Trailing Arm Mount
SU-135 68-82 Trailing arm mounting kit, rubber TL-106 68-82 Trailing arm bushing installation tool ......... 54.95
bushings (2 per car) .................................. 32.95 side
SU-1002 68-82 Trailing arm mounting kit, polyurethane
bushings (car set) ...................................... 99.95 car
Left-hand (LH) = drivers side; right-hand (RH) = passenger side
See inside back cover for special freight charges (1), (3) and (4)
12 SUSPENSION & DRIVELINE Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_006-019_Susp&Driveline_priced 6/11/10 2:11 PM Page 13
SU-118 68-82 Trailing arm, w/bushings (LH or RH) .......... 199.95 each Zip Products ALL-NEW Offset Trailing Arms
Bolt-on assemblies use all-new parts including 2 offset, heavy-duty
trailing arm (1/4 jig-welded C-channel steel with gloss black
powder coat finish), spindle bearing support, caliper mount bracket,
wheel bearings, polyurethane bushings, seals, shims, spacer, rotor,
Offset HD Trailing Arms dust shield, park brake shoes and stainless hardware, and park brake
2 offset allows use of wider tires backplate. Outright purchase, no core required.
on stock rims, or upsize to plus SU-1085 68-76 ALL-NEW offset trailing arm (LH or RH) ...... (1)
929.95 each
size wheel/tire combinations. SU-1086 77-82 ALL-NEW offset trailing arm (LH or RH) ...... (1)
929.95 each
1/4 jig-welded C-channel steel
with installed polyurethane
bushings. Made in the USA.
park brake
washer deflector backplate
support stud
Rear Wheel Bearings Kit
Zip has made the time consuming job of
replacing rear wheel bearings a bit easier
by assembling a complete kit. Includes
rotor inner and outer Timken bearings with
support spindle inner and outer seals.
outer
seal
SU-511
M-3899
M-3899 68-82 Timken wheel bearings kit (J) ...................... 39.95 side
spacer outer
bearing
TL-121 Rear spindle press ...................................................... 209.95 TL-117 Rear spindle bearing puller ....................................... 139.95
Differential
68-79 Differential Internal & Front Yoke Ring & Pinion Gears
SU-690 68-79 Carrier center pin (K) ................................... 41.50 Revive your factory rear, or upgrade for
SU-689 68-79 Carrier center pin lock bolt.......................... Call some newfound performance, with a fresh
SU-1049 68-79 Carrier center pin thrust washer (K) ........... 20.00 pair set of ring & pinion gears from Zip
SU-688 68-79 Carrier preload plate (K) .............................. 14.50 each Products. Gears are matched sets to
SU-691 68-79 Carrier preload plate springs (4 per car) (K) 5.50 each eliminate noise and whine.
SU-686 68-79 Clutch disc guide (K).................................... 7.50 each SU-626 68-79 Ring & pinion gears, 3.08 ............................ 379.95
SU-471 68-70 Front yoke w/deflector, 3 27/32, includes SU-719 68-79 Ring & pinion gears, 3.36 ............................ 469.95
U-bolts, hardware & pinion nut................ 139.95 SU-627 68-79 Ring & pinion gears, 3.55 ............................ 289.95
SU-957 68-70 Front yoke w/deflector, 3 27/32, billet SU-628 68-79 Ring & pinion gears, 3.70 ............................ 289.95
replacement............................................... 199.95 SU-629 68-79 Ring & pinion gears, 3.90 ............................ 429.95
SU-472 68-79 Front yoke w/deflector, 4 5/16 .................. Call SU-625 68-79 Ring & pinion gears, 4.11 ............................ 489.95
SU-731 68-79 Front yoke deflector ..................................... 11.50
SU-709 68-79 Front yoke pinion nut .................................. 6.50 Note: SU-625 4.11 gear set requires use of a 4-series carrier.
SU-1194 68-82 Front yoke pinion nut washer...................... 8.75 SU-860 80-82 Ring & pinion gears, 3.07 ............................ 349.95
SU-95 68-79 Pinion seal..................................................... 9.50 SU-781 80-82 Ring & pinion gears, 3.54 ............................ 229.95
SU-711 80-82 Ring & pinion gears, 3.73 ............................ 229.95
SU-846 80-82 Ring & pinion gears, 4.11 ............................ 249.95
SU-471 SU-688
(2)
SU-731
4.11 or 4.33 Gear Sets for 3-series Carrier
Zip Products has new 4.11 and 4.33 gear sets custom designed to
work in your Corvettes factory 3-series carrier. Extra thick ring gear
eliminates the need for spacers or other modifications.
SU-859 68-79 Ring & pinion gears, 4.11 ............................ 399.95
SU-690 SU-920 68-79 Ring & pinion gears, 4.33 ............................ 429.95
K thrust
washer
SU-941 68-79 NEW assembled 3-series carrier ................... 599.95
springs
SU-942 68-79 NEW assembled 4-series carrier ................... 599.95
preload plate SU-957
SU-84 SU-133
deflector
side yoke
cover
U-bolt
mount bolt
SU-917
upper cushion
bracket to housing bolt SU-510 SU-132 SU-510 SU-556
WS-4530
SU-738 SU-704
(2) (2)
Differential Rear Cover
SU-740
SU-53 68-77 Cover, w/HD bolt reinforcements (L) .......... (1)
105.95 SU-776 (4)
SU-718 78-79 Cover, w/HD bolt reinforcements................ (1)
109.95
SU-705
Note: Verify spring width before ordering rear end cover many times this (4)
80-82 Differential Side Yoke
part has been replaced with a universal-application GM part. 68-77 Corvettes
used a 2 1/4 wide rear spring; 78-79 used a 2 1/2 wide spring.
U-112 80-82 Cover & rear end support, reconditioned
w/good cushions ....................................... Call Reconditioned Side Yokes SU-521
SU-802 80-82 Cover & rear end support cushions, If your Corvette suffers from excessive
polyurethane ............................................. 33.95 set tire wear or posi clutch chatter, worn
BL-405 68-79 Cover mount bolts w/washers, side yokes are most often the cause.
double-circle headmark w/lock Zips reconditioned yokes are made of
washers (L) ................................................ 9.00 set heat treated through-hardened steel
SU-53A 68-79 Cover to housing gasket .............................. 5.50 to resist wear and eliminate need for
SU-573 80-82 Cover to housing gasket .............................. 9.50 frequent rear end alignments.
BL-404 68-79 Cover to crossmember bolts & washers (L) 4.50 set
SU-136 68-79 Cover vent .................................................... 3.95 each
SU-521 68-79 Side yoke (stub axle), STD ........................... 89.95 each
SU-557 68-79 Side yoke (stub axle), HD............................. 89.95 each
SU-53 SU-802 SU-591 80-81 Side yoke, Automatic (LH or RH)................. 109.95 each
SU-592 80-82 Side yoke, 80-81 4-speed & 82 (LH or RH).. 109.95 each
Note: Side yokes sold on exchange. Add $25.00 refundable core charge per side
for 68-79 or $45.00 per side for 80-82 if rebuildable cores do not accompany order.
SU-908 SU-901
MG-213 LSII limited slip additive, 6 oz. .................................. 12.95
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 SUSPENSION & DRIVELINE 17
68-82_26_006-019_Susp&Driveline_priced 6/11/10 2:11 PM Page 18
french U-bolt
lock
U-Joints M-272 68-79 Half shaft outer flange bolt french locks
(4), stainless (M)........................................ 12.50 car
Corvettes left the assembly plant M-3861 68-79 Half shaft outer flange bolt french locks
with non-greasable U-joints. Zip (4), steel (M).............................................. 8.50 car
stocks correct originals, replace-
ment U-joints with grease
fittings, and heavy-duty U-joints SU-130
without grease fittings.
ZSU-108
ZSU-108A
Non-Greasable BL-200 SU-208
SU-656
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST SUSPENSION & DRIVELINE 19
68-82_26_020-027_Steering_priced 6/11/10 3:24 PM Page 20
spring
SPR-147 plastic spring ZSC-650 SC-45 SC-347
collar spacer SC-624 SC-300
ZSC-35
lower
clamp
A
SC-352 68 Lower Column
turn contact tele lock
signal spring ring stand
lever & pin hub spacer lock ring screw
screw
Steering Wheel & Hub
SC-749 68 Hub, w/Tele (C) ............................................ 57.50
SC-344 68 Hub nut & washer (B)(C)............................. 1.50
ZSC-351 68 Steering wheel mount screws (6) (B)(C) .... 3.00 set
hub nut
cancelling & washer shim button horn
Telescopic Components cam star stand button
ZSC-58 68 Tele lock ring center screws (C)................... 2.00 pair 68 Tele Column
SC-395 68 Tele lock ring center star screw (C) ............. 24.50
SC-350 68 Tele stop rod................................................. 6.00
Turn Signal Components
68 Standard Column & Cover SC-47 68 Cancelling cam, w/o Tele, includes horn
contact (ZSC-35) (B)(C) ............................ 29.00
mount screw
B SC-591 68 Cancelling cam, w/Tele, includes horn
lower contact emblem
contact (ZSC-35) (B)(C) ............................ 29.00
spring & pin retainer SC-555 68 Traffic hazard knob short design ............. 19.00
SC-387 68 Turn signal lever (C)..................................... 19.50
cancelling ES-210 68 Turn signal switch......................................... 82.95
cam SC-365 68 Turn signal switch plastic cover (B) ............. 7.00
SC-645 68 Turn signal switch screws............................. 1.50 pair
SC-387 SC-365
horn
button
cover button stand
upper cover
hub nut
lower cover & washer
SC-47 SC-591
ES-210 SC-555
Upper Column
I-707 68 Column lower cover, 2-piece
(paint to match) (B) .................................... 84.95
SC-301 68 Column upper cover, 2-piece
(paint to match) (B) .................................... 99.95
68 Steering Wheel
SC-539 68 Column upper bearing ................................. 35.00 Simulated walnut reproduction
plastic wheel features OE-correct SC-660
grain, finger grips and brushed
stainless spokes. Prefer real teak?
Reproduction wheel is authentic to
factory teak steering wheel found in
65-66 Corvettes. Includes brushed
stainless spokes with a stepped
design to fit 68 hub.
D cancelling cam
upper spring hub nut & washer
adapter
washer Horn Button
lower spring SC-300 69-75 Horn button, complete, includes outer
wire clip bezel, emblem & retainer (E).................... 48.50
SC-375 77-79 Horn button cap........................................... Call
bearing shield SC-372 76-79 Horn button emblem ................................... 26.95
SC-46 69-75 Horn button stand/contact (E) .................... 26.50
lower bearing ZSC-346 69-79 Horn button stand screws (3)...................... 1.50 set
SC-590 69-79 Horn button stand repair rivets (3)............. 2.50 set
ZSC-35 69-79 Horn button stand lower contact spring
& pin kit (E) ............................................... 7.00 kit
SC-46
SC-555
Steering Wheel & Hub SC-556
lower bearing
SC-714 77-79 Steering wheel, silver spoke ........................ 209.95 H inner seal
I
SC-715 80-82 Steering wheel, black spoke ........................ 209.95
SC-716 82 Steering wheel, Collector Edition ................ 209.95
bracket
seal
SC-780 68-82 Coupler rag joint kit, reproduction ............. 27.50 kit
ZSC-524 68-82 Coupler rag joint kit, replacement .............. 12.95 kit Ignition Lock & Switch
ES-303 69-82 Ignition switch, electrical, w/Tele ................ 24.50
ES-302 69-79 Ignition switch, electrical, w/o Tele............. 22.00
LK-315 69-77 Ignition lock cylinder w/keys ....................... 23.95
LK-314 78-82 Ignition lock cylinder w/keys ....................... 23.95
SC-337 ES-305 LK-306 67-82 Key, square head A ................................... 3.95 each
LK-307 67-82 Key, round head B .................................... 3.95 each
SC-393 LK-308 68-82 Key, square head C ................................... 3.95 each
LK-309 68-82 Key, round head D .................................... 3.95 each
LK-310 68-82 Key, square head E.................................... 3.95 each
LK-311 68-82 Key, round head H .................................... 3.95 each
LK-312 68-82 Key, square head J..................................... 3.95 each
SC-388 LK-313 68-82 Key, round head K .................................... 3.95 each
LK-303 68 Lock set: Ignition & rear storage ................. 49.95 set
Turn Signal Components ZLK-300 69-77 Lock set: Ignition, doors & rear storage...... 59.95 set
Steering Box
Steering Box & Mount Steering Box Rebuild
SC-787 68-69 Steering box, new assembly ........................ 399.95 Your original steering box can be returned to as-new condition, or, if
SC-788 70-82 Steering box, new assembly ........................ 399.95 youre in a hurry Zip has rebuilt boxes in stock. All are disassembled,
SC-573 68-82 Steering box to frame bolt kit ..................... 15.00 set cleaned and painted. Rebuild includes all-new bearings, races, seals and
adjustment to OE specs. Additional costs apply if worm gear or pitman
Individual Rebuild Components shaft gear is damaged. Add $125.00 for 68-69 or $75.00 for 70-82
SC-694* 68-82 Concave plug for end of steering box......... 2.00 refundable core charge if rebuildable core does not accompany order.
SC-380* 68-82 Cover gasket (J) ............................................ 3.00 SC-532 68-69 Steering box, rebuilt .................................... 189.95
ZSC-70* 68-82 Jam nut for lash adjuster (J)......................... 1.00 SC-531 70-82 Steering box, rebuilt .................................... 189.95
SC-747* 68-82 Pitman shaft bushing set (3 pcs) (J) ............ 27.50 set
SC-76* 68-82 Pitman shaft seal (J) ..................................... 13.50
SC-72* 68-82 Shim kit for lash adjuster (J) ........................ 7.50 set
SC-748* 68-82 Worm gear bearing & race (2 per car)........ 19.00 each
SC-759*
SC-82*
68-82
68-82
Worm gear recirculating balls (56)..............
Worm gear seal (J) .......................................
15.00
6.50
set Steering Box Lubricant
Probably the most commonly
*Included in SC-638 steering box rebuild kit. overlooked fluid to replace
when servicing your Corvette is
the steering box lubricant.
GM-issue chassis grease is
jam nut correct for use in all steering boxes. 10 oz. cartridge. Screw-in fitting
makes frequent greasings to ensure longevity of box quick and easy.
SC-601 68-82 GM steering box lubricant ........................... 16.95
SC-765 68-82 Steering box greasing tool .......................... 18.50
shaft
SC-531 SC-573 bushing
shim kit
Pitman Arm
pitman SC-703 68-82 Pitman arm w/PWR steering (K) ................. 59.95
cover kit shaft
gear SC-781 68-82 Pitman arm to box nut & washer (K).......... 7.50
BL-212 68-82 Pitman arm to relay rod castle nut.............. 7.50 each
gasket
bearing race
worm gear
bearing SC-703
worm gear pitman shaft pitman
seal bushing arm
Steering Linkage
Vibration Dampener
Idler Arm
SU-106 68-82 Idler arm, replacement (L)........................... 49.50 M
SU-1024 68-82 Idler arm, correct reproduction ................... 84.95 dampener
SU-764 68-82 Idler arm bracket, welds to frame ............... 15.50 relay rod
bracket
SU-991 68-82 Idler arm boot .............................................. 9.50
BL-398 68-82 Idler arm mount bolt & nut set (4 pcs) (L) 6.50 set
reinforcements
SU-621 68-82 Idler arm plastic & rubber bushings ............ 4.50 pair
BL-212 68-82 Idler arm to relay rod castle nut.................. 7.50 each
hardware
kit
tie rod end tie rod end
BL-398 clamp w/bolt
sleeve
Steering Dampener
SU-98 68 Vibration shock dampener (M).................... 125.00
idler arm
SC-321 68 Dampener to relay rod bracket (M) ............ 27.50
bolt & nut set SC-568 68 Dampener to relay rod bracket hardware,
mounts dampener & bracket to rod (M) 6.00 set
SC-320 68 Dampener to frame bracket (M) ................. 27.50
SC-589 68 Dampener to frame bracket inner frame
reinforcements w/nuts & washers (M)..... 10.50 set
sleeve
L relay rod
Idler Arm
SC-589
SU-137
SC-729
SC-328
327 & 350 Pump Mounting
adjusting brace
N
lower bracket
rear
bracket mount
& pump stud
mount kit belt
guard pump
SC-594 pulley
mount adjusting
Rebuilt Power Steering Renew Kit stud brace
Alternator Brackets & Mount Kit 427 & 454 Pump Mounting
Adding power steering to your big-block and need all the associated M-2363 68-74 Pump adjusting brace (P) ............................ 63.50
alternator brackets for a factory installation? Complete kit includes all M-2452 68-74 Pump adjusting brace stud (P) .................... 4.50
(5) brackets plus mount hardware and exhaust manifold stud. M-2365 68-74 Pump bracket (P) ......................................... 51.50
SC-632 68-74 Pump bracket mount kit (P) ........................ 3.50 set
M-3618 68-69 427 w/PS alternator bracket kit................... 209.95 BL-375 68-74 Pump bracket & brace mount kit, includes
M-3693 70-74 454 w/PS alternator bracket kit................... 209.95 hardware for power steering pump
& alternator brackets ................................ 16.50 set
Pump Pulley
SC-406 68-74 Pump pulley, 68 300 hp & 350 w/AC, Power Steering
69-74 350 w/AC, steel replacement (P).... 54.50
SC-764 68-74 Pump pulley, 68 300 hp & 350 w/AC, nut Q
& cotter
69-74 350 w/AC, steel reproduction (P)... 64.50 pin
SC-407 68-74 Pump pulley, 68 327 w/Hi-Perf, 69-74 350 retract reinforcement
w/o AC, cast iron....................................... 94.50 boot ram hose
SC-404 68-74 Pump pulley, 427 & 454, double groove (P) 107.50 extend mount
SC-405 75-82 Pump pulley.................................................. 51.50 hose bracket
SC-536 68-74 Pump pulley mount nut (P) ......................... 2.50 bushing
SC-664 68-74 Pump pulley woodruff key ........................... 1.50
washer
boot
retract
hose
end nut
extend spacer
hose
valve pinch bolt
SC-406 SC-405 SC-407 SC-404 strap
dust cap
SC-308 SU-91
SC-311 SC-312 SC-753 SC-589 ZSC-324 68-82 Ram rebuild kit ............................................. 14.95 kit
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 STEERING 27
68-82_26_028-035_Brakes_priced 6/11/10 4:45 PM Page 28
DB-486 68-76 Deluxe brake kit, STD brakes, rebuilt Deluxe Brake Overhaul Kit
calipers w/original seal.............................. (4)
639.95 kit
DB-484 68-76 Deluxe brake kit, PWR brakes, rebuilt
calipers w/original seal.............................. (4)
639.95 kit DB-486
DB-485 77-82 Deluxe brake kit, rebuilt calipers
w/original seal ........................................... (4)
639.95 kit
DB-646 68-76 Deluxe brake kit, STD brakes, rebuilt
calipers w/O-ring seal ............................... (4)
699.95 kit
DB-647 68-76 Deluxe brake kit, PWR brakes, rebuilt
calipers w/O-ring seal ............................... (4)
699.95 kit
DB-655 77-82 Deluxe brake kit, rebuilt calipers
w/O-ring seal ............................................. (4)
699.95 kit
Note: Rebuilt calipers sold on exchange. Add $60.00 per wheel refundable core
charge if rebuildable cores do not accompany order.
DB-649 68-76 Deluxe brake kit, STD brakes, NEW
calipers w/original seal.............................. (4)
899.95 kit
DB-650 68-76 Deluxe brake kit, PWR brakes, NEW
calipers w/original seal.............................. (4)
899.95 kit
DB-656 77-82 Deluxe brake kit, NEW calipers
w/original seal ........................................... (4)
899.95 kit Original-Style vs. O-Ring Seal
DB-743 68-76 Deluxe brake kit, STD brakes, NEW Lip seal piston seals were factory installed in Shark-era calipers, and if
calipers w/O-ring seal ............................... (4)
979.95 kit youre wanting to keep your Corvette 100% correct they are the way to
DB-744 68-76 Deluxe brake kit, PWR brakes, NEW go. However, be aware that prolonged inactivity and/or worn brake
calipers w/O-ring seal ............................... (4)
979.95 kit components are the enemy of the lip seal design. If you enjoy exercising
DB-745 77-82 Deluxe brake kit, NEW calipers your Corvette heartily, or, conversely, your pride and joy often sits for
w/O-ring seal ............................................. (4)
979.95 kit extended periods, O-ring seals are the better choice. Superior in design
all-around, O-rings offer the best sealing possible.
Brake Fluid
DB-25 All Brake fluid, silicone, gallon .......................... 62.95
DB-21 All Brake fluid, silicone, quart ........................... 24.95
DB-460 All Brake fluid, DOT 3, quart ............................. 7.95
DB-347 DB-348
(4) (4)
ZDB-456 SU-335
DB-331
(4)
Rotors DB-19
(2)
DB-561 68-82 Rotor, front, w/rivet holes ........................... (1)
59.95 each
DB-562 68-82 Rotor, rear, w/rivet holes ............................. (1)
59.95 each
DB-481 68-82 Rotor rivets, front or rear rotor (10 pcs)..... 6.00 set ZDB-40
(6)
ZDB-16
(2)
DB-694 68-72 Master cylinder, STD (#5455509), DB-372 68-76 Master cylinder rebuild kit, STD .................. 25.50 kit
1 bore, DC stamp, dual bleeders ......... 109.95 DB-371 68-76 Master cylinder rebuild kit, PWR ................. 25.50 kit
DB-693 68-72 Master cylinder, PWR (#5460346), DB-370 77-82 Master cylinder rebuild kit ........................... 25.50 kit
1 1/8 bore, PG stamp, dual bleeders... 109.95
DB-730 73-74E Master cylinder, STD (#5455509),
DB-731 73-74E
1 bore, dual bleeders, no stamp .............
Master cylinder, PWR (#5460346),
109.95
Brake Fluid
1 1/8 bore, dual bleeders, no stamp ...... 109.95 DB-25 All Brake fluid, silicone, gallon .......................... 62.95
DB-729 74L-76 Master cylinder, STD (#5455509), DB-21 All Brake fluid, silicone, quart ........................... 24.95
1 bore, no bleeders or stamp.................. 109.95 DB-460 All Brake fluid, DOT 3, quart ............................. 7.95
DB-695 74L-76 Master cylinder, PWR (#5460346),
1 1/8 bore, no bleeders or stamp ........... 109.95
DB-696 77-82 Master cylinder (#5460346),
DB-25 DB-460 DB-21
1 1/8 bore, no bleeders or stamp ........... 109.95
Zip Products
DB-380 DB-654 DB-577 ZDB-43 DB-462
www.corvettepartsblog.com
B
DB-535 M-3370 CL-115 68-79 Brake Pedal
master
cylinder
seal
Brake Pedal Pad
mount nut stop light
& washer switch striker WS-4610 68-72 Pedal pad, Manual, GM (B) ......................... 9.50
WS-604 68-79 Pedal pad, Manual, replacement (B) ........... 6.00
WS-4457 80-81 Pedal pad, Manual........................................ 9.50
WS-605 68-79 Pedal pad, Automatic ................................... 7.50
WS-4459 80-82 Pedal pad, Automatic ................................... 9.50
WS-604A 68-79 Pedal pad stainless trim, Manual (B)........... 7.50
Motive POWER BLEEDERTM WS-605A 68-79 Pedal pad stainless trim, Automatic ............ 6.50
Brake Lines
All lines are TBW (Tinned Bundy Weld) steel or stainless steel tubing
with double inverted flares. Pre-bent to original shape some have Brake Line Kit
spiral armor as original. All lines required for listed applications. Rubber hoses, blocks and clips
are listed elsewhere in this section.
Front Brake Line Z-396 68 Steel lines, full car, STD................................ (3)
119.95 kit
Z-309 68 Front crossover line (C)................................ 28.00 CZ-396SS 68 Stainless lines, full car, STD.......................... (3)
149.95 kit
Z-309SS 68 Front crossover line (stainless) .................... 32.50 Z-379 68 Steel lines, full car, PWR............................... (3)
124.95 kit
Z-332 69 Front crossover line (C)................................ 28.00 CZ-379SS 68 Stainless lines, full car, PWR......................... (3)
149.95 kit
Z-332SS 69 Front crossover line (stainless) .................... 32.50 Z-385 69 Steel lines, full car, STD................................ (3)
119.95 kit
Z-338 70-73 Front crossover line (C)................................ 35.50 CZ-385SS 69 Stainless lines, full car, STD.......................... (3)
145.95 kit
Z-338SS 70-73 Front crossover line (stainless) .................... 47.50 Z-380 69 Steel lines, full car, PWR............................... (3)
119.95 kit
Z-392 74-82 Front crossover line (C)................................ 35.50 CZ-380SS 69 Stainless lines, full car, PWR......................... (3)
149.95 kit
Z-392SS 74-82 Front crossover line (stainless) .................... 47.50 Z-386 70-73 Steel lines, full car, STD................................ (3)
119.95 kit
Z-308 68 Left front brake line (C) ............................... 10.00 CZ-386SS 70-73 Stainless lines, full car, STD.......................... (3)
159.95 kit
Z-308SS 68 Left front brake line (stainless).................... 15.00 Z-381 70-73 Steel lines, full car, PWR............................... (3)
119.95 kit
Z-335 69 Left front brake line (C)(E) .......................... 13.50 CZ-381SS 70-73 Stainless lines, full car, PWR......................... (3)
159.95 kit
Z-335SS 69 Left front brake line (stainless).................... 17.50 Z-398 74 Steel lines, full car, STD................................ (3)
129.95 kit
Z-339 70-73 Left front brake line (C)(E) .......................... 13.50 Z-398SS 74 Stainless lines, full car, STD.......................... (3)
159.95 kit
Z-339SS 70-73 Left front brake line (stainless).................... 17.50 Z-399 74 Steel lines, full car, PWR............................... (3)
129.95 kit
Z-391 74-82 Left front brake line (C) ............................... 17.50 Z-399SS 74 Stainless lines, full car, PWR......................... (3)
159.95 kit
Z-391SS 74-82 Left front brake line (stainless).................... 22.00 Z-394 75 Steel lines, full car, STD................................ (3)
129.95 kit
CZ-394SS 75 Stainless lines, full car, STD.......................... (3)
159.95 kit
Z-395 75-82 Steel lines, full car, PWR............................... (3)
129.95 kit
Z-391 CZ-395SS 75-82 Stainless lines, full car, PWR......................... (3)
159.95 kit
U clip U clip
right rear block
center clip
clips
brake hose
copper
washer
mount right rear block
bolt
support bracket
U clip
master cylinder lines clips
proportioning valve
clip bolts
brake
clip hose
ZDB-16
(2)
ZDB-17
(2)
68 Proportioning Valve
ZDB-40
(6)
left front SU-710 SU-1026
brake line
valve bracket
mount
master
cylinder to
bolt U clip
Complete Brake Hose Kit
block lines Original-style rubber hoses with U clips and copper washers. Same as
proportioning E factory installed on Shark Corvettes. Made in the USA from Goodyear
valve
69-73 Proportioning Valve
Rubber Company hose. Set of 4. DOT approved.
DB-543 68-82 Rubber brake hoses ...................................... 46.95 set
Park Brake
68-82 Cable Pulley
Park Brake Handle
center
DB-733 70-76 Park brake handle assembly, correct G mount bolt
pulley
reproduction (F) ........................................ 144.95
DB-356 77-82 Park brake handle assembly, replacement pulley
bearing
for 68-76 models (F) .................................. 112.95
frame bracket handle assembly
PB-200 68-82 Handle to floor mount bolts (F) .................. 2.00 pair
I-641 68-76 Handle plastic slide/seal............................... 5.50
ES-472 68-82 Park brake warning light switch .................. 24.00 mount bolt
See page 153 for park brake console and related parts
DB-356 I-641
front cable
ES-472
return spring
Reproduction Handle
Includes original-style handle frame nut
bracket
with correct grip and tool equalizer
needed for installation. Must
DB-644
use original floor bracket.
F
DB-644 68-69 Reproduction park brake handle ................. 82.95 kit 68-82 Front Cable & Handle
DB-642 70-76 Reproduction park brake handle ................. 82.95 kit
DB-464
DB-707
PB-232 68-82 Cable bracket, on rear trailing arm (H)....... 12.50 pair nylon guide
PB-268 68-82 Cable bracket, on front trailing arm (H) ..... 11.50 pair frame bracket
ZDB-45 68-82 Cable Mickey Mouse clip, stainless front bracket
(4 per car) (H) ........................................... 1.50 each
DB-466 68-82 Cable nylon guide (2 per car) (H) ............... 1.50 each
DB-351 68-82 Equalizer, rear cable (F) ............................... 8.00
SPR-136 68-82 Underbody return spring, stainless (F)........ 7.50
dust boot
cable clip
cable clip
DB-18A
SU-412
DB-46
DB-48
PB-248
PB-261 ZPB-250
(2) ZPB-249 (2)
(2)
DB-46 68-82 Rear park brake cable, stainless steel
w/stainless outer sheath, includes
(4) clips (ZDB-45) ...................................... 59.95 kit
DB-557 68-82 Rear park brake cable, stainless steel Brake Shoes Hardware
w/black outer sheath, includes Corvettes left the assembly
(4) clips (ZDB-45) ...................................... 44.95 kit plant with steel park brake
shoes hardware. These springs
and retainers deteriorate over
time and often break leaving
you with a non-working brake.
Zips all-stainless hardware kit
includes everything youll need
when replacing your original park brake shoes.
DB-14 68-82 Park brake shoe hardware kit ...................... 49.95 kit
Zip Products
blog technical articles www.corvettemagazine.com www.corvettepartsblog.com
H-423
H-384
H-445
P02 Wheel Covers
H-388 69-82 Rally wheels set, stainless trim rings ........... (4)
759.95 car
H-389 69-82 Rally wheels set, OE-style trim rings............ (4)
919.95 car
Rally Wheel Caps & Trim Rings
H-309 68-82 Rally wheel center cap ................................. 74.95 each
SF-320 68-82 Rally wheel center cap screws, attach Steel Wheels
ornament to cap (4).................................. 6.00 whl H-107 68-82 Lug nuts ........................................................ .75 each
H-304 68-82 Trim ring, original 4-clip design................... 84.95 each H-383 68 Rally wheel, 15x 7 (powder coated) ........ 109.95 each
H-387 68-82 Trim ring set, original 4-clip design............. 299.95 car H-301 69-82 Rally wheel, 15x 8 (powder coated) ........ 109.95 each
H-313 69-82 Trim ring, multi-clip replacement, chrome ZMG-54 68-82 Rally wheel paint, argent silver, 12 oz......... 7.95 each
plated stainless steel ................................. 23.50 each H-339 68-82 Tire valve stems w/caps (5) ......................... 8.00 car
H-386 69-82 Trim ring set, multi-clip replacement, H-338 68-82 Tire valve stem caps, reproduction (5)........ 3.50 car
chrome plated stainless steel .................... 84.95 car H-445 68-73 Tire valve stem extensions (5), use w/P02
H-681 68-82 Trim ring clip, replacement clip for wheel cover................................................ 8.50 car
original-style trim ring (4 per ring) .......... 5.50 each H-112 68-82 Wheel lock kit, includes (4) locks & key ...... 22.00 car
H-229 68-82 Wheel stud.................................................... 1.75 each
H-304
H-313
H-301
H-309
H-383 H-301
H-112
H-637 68-82 Rally wheel cap set, replacement ................ 129.95 car
H-339
H-338
H-327 H-382
H-472
H-328 H-351
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 WHEELS & TIRES 37
68-82_26_036-038_Wheels&Tires_priced 6/11/10 4:59 PM Page 38
front
bolt
washer
H-511 H-518
mount
roll pin bolt
bracket rivet
nut
spacer
bracket lock
bracket
bolt rubber
front cover
lock bolt support
bolt lower
tub
TR-168 68-74 Spare tire lock bolt assembly ....................... 42.95 set
TR-174 75-77 Spare tire lock bolt assembly ....................... 42.95 set
TR-175 78-82 Spare tire lock bolt assembly ....................... 44.95 set
For the enthusiast who insists on superior handling, B.F. Goodrich classic
design radials are perfect for chrome bumper Sharks. Constructed of TR-86
polyester and steel belts with an all-season tread for predictable TR-111
handling in any weather. Available with 3/8 red line or T/A raised white TR-130
letter sidewall. Size 215/70R15 only. S speed rated. No Discount.
H-744 68-72 Red line radial tire ........................................ (1)
199.95 each
H-745 68-72 T/A raised white letter radial tire ................ (1)
89.95 each
LK-206
TR-110
TR-112 WS-452
Production records for all Corvettes built in the Bowling Green assembly plant still exist but precise assembly dates for C3s assembled in the
St. Louis plant are not known. You can however, determine their approximate assembly day with a fair degree of accuracy. For nearly all
months of production the final serial number car assembled on the last working day of the month is known and therefore the total production
for each month is known. Using this information and your cars VIN you can determine which day your car was built. For example, if the final
VIN for February was 11,000 and the final VIN for March was 12,600 and your car is VIN 11,786, then you know your car was made in March.
You also know they made 1,600 cars in March. Divide that number by the total number of working days in the month and you have
approximately how many cars were produced each working day and the VIN range for each of those days. Plug your VIN in and you know
which day your car was made give or take a day or two for slight irregularities in daily output.
Once you have the assembly date for your car in-hand you can evaluate the correctness of all of its dated components. All component
manufacturing dates have to precede the final assembly of the car and the generally accepted rule of thumb is that they should not precede it
by more than 6 months. For example, if your car was assembled on May 8th all of its dated components, such as the alternator, radiator,
wheels, engine, differential, transmission and body glass, will be dated earlier than May 8th but no later than about November 8th of the
previous year if in fact those components are original. Reading manufacturing dates on most components is pretty straightforward. Typically
a single number represents the year, a letter represents the month with A being January, B being February, and so on, and one or two
additional numbers represent the day. For example, an alternator dated 9B21 was made February 9, 1969. In addition to reading date codes it
is also important to evaluate the part numbers on major components. All major cast parts, including the engine block, cylinder heads, intake
and exhaust manifolds, and transmission case, have a casting number. Most other significant parts, such as the radiator, alternator, starter,
distributor, carburetor and wheels, have either a stamped-in part number or a part number tag.
base
air horn gasket
stud
AC-208
AC-45
M-2300
M-2389
AC-59 AC-23
AC-46
C
68-72 1x4 Open Element Air Cleaner AC-52
MF-171 MF-169
MF-177
MF-181
MF-172 MF-173
base
73-75 Air Cleaner
air horn gasket Air Cleaner
crankcase stud
AC-155 73-74 Air cleaner assembly, 350 (E) ....................... 359.95
hose clamp AC-159 75 Air cleaner assembly (E)............................... 359.95
crankcase PCV valve Note: Air cleaner assemblies include base, filter element and lid do not include
vent elbow flange seal or crankcase filter.
grommet
grommet
AC-156 73-74 Air cleaner base (E) ...................................... 205.00
AC-160 75 Air cleaner base (E) ...................................... 205.00
AC-98 73-74 Air cleaner filter, Delco................................. 12.95
AC-99 75 Air cleaner filter, Delco................................. 12.95
AC-157 73-75 Air cleaner lid, black (E) ............................... 54.95
AC-216 73-75 Air cleaner lid, chrome ................................. 39.95
AC-119 73-75 Air cleaner lid wing nut (black) (E) ............. 3.50
AC-117 WS-601 73-75 Air cleaner seal (correct length) (E) ............ 55.00
AC-154 73-74 Air cleaner seal flange, 350 (E) .................... 69.50
AC-158 75 Air cleaner seal flange (E) ............................ 69.50
PCV & Crankcase Vent CZ-952 73-75 Air horn gasket ............................................. 3.50
AC-42 73-74 Carburetor to air cleaner stud (E) ............... 7.50
AC-50 70-72 Crankcase vent tube 90 elbow, 454 ........... 12.00 AC-141 75 Carburetor to air cleaner stud (E) ............... 5.50
M-2367 70-72 Crankcase vent tube hose, 454 .................... 15.50
AC-65 70-72 Crankcase vent tube 90 elbow, 350 (D) ..... 10.50 PCV & Crankcase Vent
AC-64 70-72 Crankcase vent tube hose, 350 (D) ............. 12.50
M-2389 70-72 PCV valve (D) ............................................... 7.50 M-2314 73-75 Crankcase vent tube, 350 (E) ....................... 18.00
M-2300 70-72 PCV valve hose w/90 end ........................... 13.50 M-2769 73-74 Crankcase vent tube, 454............................. 17.50
ZHC-333 70-72 PCV hose clamps (D).................................... 1.50 pair AC-92 73-75 Crankcase vent tube filter w/clip (E)........... 4.75
M-2942 73-75 Crankcase vent tube hose (E) ...................... 4.00
M-2596 73-74 PCV valve, 73-74 454 (E) .............................. 8.00
M-2367 AC-65 M-2952 73 PCV valve, 350 (E) ........................................ 5.00
M-2679 74-75 PCV valve, 350 L48 (E) ................................. 5.50
M-2389
M-2677 74-75 PCV valve, 350 L82 (E) ................................. 8.50
ZHC-333 M-3913 73-75 PCV valve hose w/clamps ............................ 12.50
ZHC-333 73-75 PCV hose clamps .......................................... 1.50 pair
AC-50 AC-64
AC-92
M-2314 M-2769
Air Cleaner Decals
MF-179 70 Air cleaner lid 454 decal............................... 4.25
MF-174 71 Air cleaner lid 270 hp decal (A) ................... 3.75
MF-184 71 Air cleaner lid Turbo-jet 365 hp decal...... 4.25
MF-189 71 Keep your GM car ... decal ....................... 3.75
M-2942
MF-190 72 Keep your GM car ... decal ....................... 3.75
MF-184
M-2677 M-2952 M-2596 M-2679
MF-174 MF-179
Air Cleaner Decal
MF-191 73 Keep your GM car ... decal ....................... 3.75
MF-192 74 Keep your GM car ... decal ....................... 3.75
MF-193 75 Keep your GM car ... decal ....................... 3.75
MF-189
stud
hose
hose clamp
flex duct
filter
crankcase vent tube
air intake
center duct
H
flex duct
air
PCV & Crankcase Vent intake
fender
M-2768 76-81 Crankcase vent tube (F) ............................... 20.00 duct
AC-92 73-81 Crankcase vent tube filter w/clip (F) ........... 4.75
M-2942 73-81 Crankcase vent tube hose (F) ...................... 4.00
EH-449 76-81 Heat stove hose, air cleaner to RH
exhaust manifold cover, metal hose (F) ... 11.50
EH-502 76-81 Heat stove hose clamps (F).......................... 7.50 pair air intake
M-2679 76-81 PCV valve, 350 L48 & 81 All......................... 5.50 center duct
M-2677 76-80 PCV valve, 350 L82 ....................................... 8.50 flex duct
M-3913 76-81 PCV valve hose w/clamps ............................ 12.50
ZHC-333 68-70 PCV hose clamps .......................................... 1.50 pair
EH-449
82 Air Cleaner
Air Cleaner
AC-63 82 Air cleaner filter (2 per car), Delco.............. 11.95 each
AC-105 82 Sensor, inside air cleaner ............................. 62.50
M-2768 M-2677 M-2679 M-2942 AC-92
AC-111 82 Air horn gaskets ........................................... 10.00 pair
M-2678 82 PCV valve ...................................................... 6.00
Air Cleaner Decal
MF-194 76 Keep your GM car ... decal ....................... 3.75
MF-195 77 Keep your GM car ... decal ....................... 3.75
MF-196 78 Keep your GM car ... decal ....................... 3.75 AFE Performance Air Filter
MF-197 79 Keep your GM car ... decal ....................... 3.75 Looking for more horsepower and miles
MF-198 80 Keep your GM vehicle ... decal................. 3.75 per gallon? Swap your stock filter for a
MF-199 81 Keep your GM vehicle ... decal................. 3.75 high-flow aFe unit. Increases airflow up
to 57% and lasts virtually forever.
Washable and reusable up to 50,000
miles between cleanings! Recharger kit
AC-207
includes filter cleaner and fresh oil.
MF-198 MF-194 MF-196 AC-207 68-72 AFE Performance filter, open element......... 49.95
AC-204 70-72 AFE Performance filter, closed element....... 54.95
AC-206 76-81 AFE Performance filter ................................. 49.95
AC-212 Air filter recharger kit ................................................ 10.95 kit
pulley
pivot bolt
M-2262 mounting
sleeve
mount
bolt mount bolt
lower bracket
pivot bolt
M-3492 M-2546 M-2547
M-2361
diverter valve
EFE actuator EH-525
injector pipe mount bolt (1)
adjusting brace
bracket
injector pipe
M EH-352 EH-342
(4)
68-79 A.I.R. System
EH-346 69-74 Diverter valve, 350 (M) ................................ Call EH-388 EH-328
EH-526 69-76 Diverter valve elbow .................................... Call
EH-339 69-79 Diverter valve gasket (2 per car) ................. 5.50 each
EH-463 80-82 Diverter valve gasket (2 per car) ................. 2.00 each
ZEH-409
ZHC-610
Emission Decal
Vacuum Hose Kit Reproduction decals are reproduced using original GM blueprints
and specifications. Decals show engine tune-up and emission
N specifications. 68-Early decal is located on radiator; 68-Late
through 79 decals are located on cowl above master cylinder. 80-82
EFE TVS fitting decals are located under left lower side of hood.
MF-200 68 Emission decal, 300, 390 & 400 hp
Automatic, B........................................... 5.75
EGR valve MF-201 68 Emission decal, 300 hp Manual, T............ 5.75
MF-202 68 Emission decal, 350 hp U.......................... 5.75
MF-203 68 Emission decal, 390 hp F .......................... 5.75
MF-204 68 Emission decal, 400 & 435 hp Manual, M 5.75
MF-205 68 Emission decal, L88 V................................ 5.75
MF-206 69 Emission decal, 300 & 350 hp CF ............. 5.75
MF-207 69 Emission decal, 390 & 400 hp CJ .............. 5.75
MF-208 69 Emission decal, 435 hp/L88 CN................ 5.75
EFE actuator
MF-209 70 Emission decal, 300 hp CB........................ 5.75
EGR TVS fitting MF-210 70 Emission decal, 350 hp AX........................ 5.75
hose kit
MF-211 70 Emission decal, 370 hp CT........................ 5.75
MF-212 70 Emission decal, 390 hp DQ ....................... 5.75
MF-213 71 Emission decal, 270 hp AR........................ 5.75
MF-214 71 Emission decal, 330 hp AX........................ 5.75
Emission Hoses Kit MF-215 71 Emission decal, 365 hp AV........................ 5.75
Includes all (as required) connectors and correct-color hoses to MF-216 71 Emission decal, 425 hp AZ........................ 5.75
properly connect distributor vacuum advance control, carburetor MF-218 72 Emission decal, 350 base LJ ...................... 5.75
choke vacuum control, smog pump diverter valve, EGR valve and MF-219 72 Emission decal, LT-1 LP ............................. 5.75
fitting, EFE valve and fitting, spark controls, carburetor idle control, MF-220 72 Emission decal, 454 LZ.............................. 5.75
air cleaner vacuum diaphragm, and clean air and choke tubes. MF-221 73 Emission decal, L48 WJ ............................. 5.75
ZVA-301 68-69 Vacuum hose kit, 3x2 ................................... 10.50 set MF-222 73 Emission decal, L82 WK ............................ 5.75
ZVA-302 68-69 Vacuum hose kit, 1x4 ................................... 6.50 set MF-223 73 Emission decal, 454 WN ........................... 5.75
ZVA-303 70 Vacuum hose kit, 300 & 350 hp ................... 7.50 set MF-224 74 Emission decal, L48 ZB.............................. 5.75
ZVA-304 70 Vacuum hose kit, 390 hp.............................. 8.50 set MF-225 74 Emission decal, L82 ZF .............................. 5.75
ZVA-305 70 Vacuum hose kit, LT-1................................... 10.50 set MF-226 74 Emission decal, 454 ZJ .............................. 5.75
ZVA-306 71 Vacuum hose kit, LT-1................................... 10.50 set MF-227 74 Emission decal, 454 ZH ............................. 5.75
ZVA-307 71 Vacuum hose kit, 270 hp.............................. 6.50 set MF-228 75 Emission decal, L48 AS.............................. 5.75
ZVA-308 71 Vacuum hose kit, 365 hp.............................. 6.50 set MF-229 75 Emission decal, L48 Calif. DR.................... 5.75
ZVA-309 71 Vacuum hose kit, 425 hp.............................. 10.50 set MF-230 75 Emission decal, L82 AU ............................. 5.75
ZVA-310 72 Vacuum hose kit, 200 hp.............................. 6.50 set MF-231 76 Emission decal, L48 XX ............................. 5.75
ZVA-311 72 Vacuum hose kit, LT-1................................... 10.50 set MF-232 76 Emission decal, L48 Calif. XZ .................... 5.75
ZVA-312 72 Vacuum hose kit, 270 hp.............................. 10.50 set MF-233 76 Emission decal, L82 XY ............................. 5.75
ZVA-313 73 Vacuum hose kit, 350 Manual ...................... 11.50 set MF-234 77 Emission decal, L48 AY.............................. 5.75
ZVA-314 73 Vacuum hose kit, 350 Automatic ................. 14.50 set MF-235 77 Emission decal, L48 Calif. AZ .................... 5.75
ZVA-315 73 Vacuum hose kit, 454 Manual ...................... 12.50 set MF-236 77 Emission decal, L48 high altitude CB ....... 5.75
ZVA-316 73 Vacuum hose kit, 454 Automatic ................. 16.50 set MF-237 77 Emission decal, L82 CA ............................. 5.75
ZVA-317 74 Vacuum hose kit, L48 Manual ...................... 12.50 set MF-238 78 Emission decal, L48 DU............................. 5.75
ZVA-318 74 Vacuum hose kit, L48 Automatic ................. 13.50 set MF-239 78 Emission decal, L48 Calif. WA................... 5.75
ZVA-319 74 Vacuum hose kit, L82 Manual ...................... 11.50 set MF-240 78 Emission decal, L48 high altitude DY....... 5.75
ZVA-320 74 Vacuum hose kit, L82 Automatic ................. 12.50 set MF-241 78 Emission decal, L82 DW............................ 5.75
ZVA-321 74 Vacuum hose kit, 454 Manual ...................... 12.50 set MF-366 79 Emission decal, L82 X6 ............................. 10.75
ZVA-322 74 Vacuum hose kit, 454 Automatic ................. 15.50 set MF-367 79 Emission decal, L48 CJ .............................. 10.75
ZEH-300 75 Vacuum hose kit ........................................... 20.50 set MF-368 79 Emission decal, L48 high altitude CM ...... 10.75
ZEH-301 76 Vacuum hose kit, L48 except Calif. .............. 20.50 set MF-369 79 Emission decal, L48 Calif. CR .................... 10.75
ZEH-302 76 Vacuum hose kit, L82 & L48 NB2................. 24.50 set MF-370 80 Emission decal, L48 Automatic CX ........... 10.75
ZEH-303 77 Vacuum hose kit, L48 except Calif. .............. 22.50 set MF-371 80 Emission decal, L82 Automatic ADN ........ 10.75
ZEH-304 77 Vacuum hose kit, L82 & L48 NB2 or NA6 .... 26.50 set MF-372 80 Emission decal, 305 Calif. DR ................... 10.75
ZEH-305 78 Vacuum hose kit, L48 except Calif. .............. 24.50 set MF-373 80 Emission decal, 350 L48 4-speed 32......... 10.75
ZEH-306 78 Vacuum hose kit, L48 NA6 ........................... 30.50 set MF-375 81 Emission decal, Automatic AUD ............... 10.75
ZEH-307 78 Vacuum hose kit, L82 & L48 NB2................. 32.50 set MF-376 81 Emission decal, 4-speed AUF .................... 10.75
ZEH-310 79 Vacuum hose kit, L48 except Calif. .............. 34.50 set MF-377 81 Emission decal, Automatic, Calif. AUH ..... 10.75
ZEH-308 79 Vacuum hose kit, L48 NA6 ........................... 32.50 set MF-378 81 Emission decal, 4-speed, Calif. AUJ........... 10.75
ZEH-309 79 Vacuum hose kit, L82 & L48 NB2................. 34.50 set MF-379 82 Emission decal, CCW................................. 10.75
MF-380 82 Emission decal, Calif. CCX ........................ 10.75
Oxygen Sensor MF-217 71 Emission decal on vapor canister CB........ 5.75
Zip has a full selection of EGR valves for 73-82 Corvettes in stock and
ready to ship. When ordering, supply production number stamped on
original valve. If production number is unknown, provide a complete
application description including year of car, engine and transmission
type, and federal or non-federal emissions. Call your Zip Products sales
MF-373
representative for pricing on individual EGR valves.
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 ENGINE 47
68-82_26_039-067_Engine_priced 6/12/10 9:26 AM Page 48
E-562
M-2910 M-2912
E-579
Starter Mount
BL-378 68-69 Starter bolts, 327 & 350 (O) ........................ 6.50 pair
BL-379
BL-379
68-74
70-81
Starter
Starter
bolts, 427 & 454...............................
bolts, 350 Manual (O)......................
6.50
6.50
pair
pair Starter Heat Shield
BL-382 70-82 Starter bolts, 350 Automatic........................ 6.50 pair Wrap your Corvettes starter in this
BL-380 68-72 Starter bolt shim kit ..................................... 5.00 kit ceramic cloth-like insulation to help
M-2246 68-74 Starter brace, 427 & 454 except L88 (P) ..... 10.50 eliminate hard starts due to heat soak
M-2405 68-69 Starter brace, L88 ......................................... 16.50 from the exhaust system. 7x 24; trim
M-2407 68-69 Starter brace, 350 (O) .................................. 13.50 to exact length needed.
M-2641 70-82 Starter brace, 350 w/o LT-1 (O)................... 8.50
M-2642 70-72 Starter brace, LT-1 ........................................ 10.00 X-1701 Starter heat shield...................................................... 27.95
BL-409 68-82 Starter brace bolt (O)(P).............................. 1.50
M-3265 68-82 Starter brace nut .......................................... 1.00
10% off
Restorers Discount
M-2246
M-2407 M-2641 BL-379 BL-378 BL-380
O P
solenoid
shield nut
Zip Products
www.corvettepartsblog.com
Intake Manifold
Intake Manifold Bolts Intake Manifold Gaskets
BL-343 68-74 Intake manifold bolts, 427 & 454, (16) A Made from correct Koremetal material. 68-72 feature round tab
headmark bolts, zinc plated...................... 19.50 car ends as original (not found on aftermarket gaskets). Set includes pair of
BL-203 68-74 Intake manifold bolts, 427 & 454, (16) M side gaskets, front and rear end seal, and distributor gasket.
headmark bolts, zinc plated...................... 18.50 car
BL-303 68 Intake manifold bolts, 427, (16) FP
headmark bolts, zinc plated...................... 17.50 car
BL-361 68-70 Intake manifold bolts, 327 & 350, (11) M
& (1) double circle headmark,
black phosphate ........................................ 19.50 car
BL-527 68-70 Intake manifold bolts, 327 & 350, (11) zinc
& (1) black, TR headmark bolts............. 21.50 car
BL-353 71-82 Intake manifold bolts, 350, (10) M
M-3130
& (2) double circle headmark bolts,
black phosphate ........................................ 22.50 car
BL-459 68-82 Intake manifold bolt washers, helps M-3132 68 Intake gaskets, 327....................................... 28.50 set
protect aluminum intake manifolds from M-3128 69-72 Intake gaskets, 350....................................... 26.00 set
bolt head (not originally used by GM)..... 5.50 set M-3133 73-81 Intake gaskets, 350....................................... 14.50 set
SF-718 68-81 Intake manifold underpan rivet set ............. 3.50 set M-3130 68-71 Intake gaskets, big-block w/square ports.... 26.50 set
M-3129 68-72 Intake gaskets, big-block w/round ports..... 22.50 set
Thermostat Housing
M-196 68-82 Thermostat, 180 .......................................... 7.95
M-3476 68-82 Thermostat, 160 .......................................... 7.95
M-3025 68-69 Thermostat housing, cast iron, correct
BL-343 BL-361 BL-353 BL-459 #3827369, L88 ........................................... 56.50
M-224 68-73 Thermostat housing, cast iron
Intake Manifold Fittings replacement for aluminum housing, All
except L88.................................................. 16.50
M-2223A 68-72 327 & 350 4-speed ....................................... 13.50 M-3024 68-73 Thermostat housing, cast aluminum,
73 L48 & LS4...................................................... 13.50 correct #3877660, All except L88.............. 51.50
M-2223B 68-69 327 or 350 w/AC or Automatic.................... 13.50 M-3751 74-81 Thermostat housing, cast aluminum,
68-69 390 hp w/AC................................................. 13.50 correct #469519 w/2 TVS openings.......... 39.50
73 L48 Automatic .............................................. 13.50 M-2799 82 Thermostat housing w/2 TVS openings ...... 23.50
M-2223D 68-69 327 or 350 w/PB & AC or Automatic........... 13.50 BL-363 68-69 Thermostat housing bolts, L88,
69 350 w/PB ...................................................... 13.50 TR headmark .......................................... 6.50 pair
69 390 hp w/Automatic & PB ........................... 13.50 BL-364 68-73 Thermostat housing bolts, aluminum
M-2223E 68-69 390 hp w/AC & PB ....................................... 17.50 housing, TR & WB headmarks............ 6.50 pair
68 327 w/PB & Automatic................................. 17.50 BL-531 68-74 Thermostat housing stud, 3/8 stud on
M-2223F 68-69 400 hp w/AC................................................. 21.00 both ends................................................... 5.00 each
68-69 400 & 435 hp w/Automatic ......................... 21.00 M-3750 74-81 Thermostat housing bolts, TR headmark 3.50 pair
M-2223G 68 327 w/PB ...................................................... 18.50 BL-526 74-77 Thermostat housing plug, plugs unused
68-69 400 & 435 hp w/PB ...................................... 18.50 TVS hole..................................................... 4.50
M-2223H 68-69 400 hp w/PB & Automatic ........................... 21.00 M-2794 68-82 Thermostat housing gasket ......................... 2.00
68-69 400 hp w/PB & AC ....................................... 21.00 M-2301 68-69 Thermostat housing spacer, aluminum, L88 27.50
M-2223J 69 350 w/PB & Automatic................................. 21.00
69 350 w/PB, AC & 4-speed .............................. 21.00
M-2223K 70-72 350 Automatic .............................................. 22.00 M-196 M-2301
M-2223L 70 LS5 or LS6 ..................................................... 22.00
70-72 LT-1 w/4-speed & PB .................................... 22.00
M-2223M 71-73 LS5 ................................................................ 18.50
73 LS4 Automatic .............................................. 18.50
M-2223N 70 LS5 w/Automatic & PB................................. 21.00
BL-364 M-3025 M-2798 M-3024
M-2223P 74-75 All Automatic, 2 ports .................................. 12.00
M-2223R 73-78 All Manual, 1 port ........................................ 12.50
M-3187 76-82 All with 4 ports ............................................. 12.50 Engine Lift Brackets
M-3752 68-69 Engine lift bracket, 427 3x2 ......................... 11.00
M-2223R M-2223P M-2223N M-2223M M-2223L M-2223K M-2223J M-345 68-74 Engine lift brackets, 427 1x4 & 454............. 22.50 pair
M-2702 68-70 Engine lift brackets, 327 & 350.................... 22.50 pair
M-2700 71-82 Engine lift brackets, 350............................... 22.50 pair
M-2702 M-3752
M-2223H M-2223G M-2223F M-2223E M-2223D M-2223B M-2223A M-2700 M-345
Accelerator Pedal
WS-600 68-72E Accelerator pedal, w/o trim......................... 8.00
CZ-791 SPR-114 CZ-1063
WS-652 72L-82 Accelerator pedal ......................................... 8.50
WS-600A 68-72 Accelerator pedal trim ................................. 7.50
SPR-114 68-82 Accelerator pedal spring .............................. 5.50
WS-600 CL-122 68-82 Accelerator pedal rod pin ............................ 3.00
M-2766 CZ-1071
WS-652
Note: Engine gasket sets include intake manifold (oval port), distributor and
thermostat gaskets, head gaskets, valve stem seals, timing cover, water pump and
fuel pump gaskets, exhaust manifold gaskets, oil pan and oil pan drain gaskets,
oil pump shaft retainer and rear main bearing.
Evaporator Canister
Vapor Canister
GT-380 70-74 Fuel vapor separator, plastic can mounting
on LH side of tank ..................................... 50.00
M-2586 70-73 Vapor canister (U) ........................................ 107.50
M-2691 74-77 Vapor canister (U) ........................................ Call
EN-156 EN-157 M-2590 78-80 Vapor canister, w/o high altitude ................ 102.50
M-3598 M-3599 M-2589 78-79 Vapor canister, w/high altitude ................... Call
M-2592 81 Vapor canister............................................... 115.00
vapor canister
M-2586
Crankshaft Pulley
M-2969 68 Crank pulley, 327 w/o AC (#987) ................ 149.00
M-2970 68E Crank pulley, 327 w/AC (#838).................... 110.00
M-2978 68L-74 Crank pulley, 327 or 350 w/AC (#013) ........ 110.00
M-2756 69-74 Crank pulley, 327 or 350 w/o AC................. 51.50
M-2754 68-69E Crank pulley, 427, cast iron.......................... 175.00
Note: M-2754 fits 69-Early up to serial number 24000.
TC-109 TC-114 TC-123
M-2762 69L-74 Crank pulley, 427 & 454, steel ..................... 51.50
M-2754 71 Crank pulley, 454 LS6 ................................... 175.00
M-2756 74-80 Crank pulley, 350 w/o AC, 6 5/8 TC-112 TC-113 BL-316
diameter, double groove .......................... 51.50
M-2787 75-82 Crank pulley, 75-80 w/AC & 81-82 All,
7 3/4 diameter, double groove ............... Call
M-3388 68 Power steering add-on pulley, 327,
deep groove............................................... 90.00
M-2755 68-74 Power steering add-on pulley, 327 & 350 ... 50.00
M-2786 75-82 Power steering add-on pulley, single .......... 50.00 Timing Chain & Gear
M-2356 68-82 Timing gear set, 327 & 350 ......................... 27.95 set
EN-153 68-74 Timing gear set, 427 & 454 ......................... 42.95 set
Idler Pulley
M-3207 68 Idler pulley assembly, 427 w/AC.................. 225.00
M-2337 69-74 Idler pulley assembly, 427 & 454 w/AC (V) 139.50
M-2313 68-74 Idler pulley upper adjusting stud (V) .......... 14.50
M-2453 68-74 Idler pulley lower mount kit, includes
bolt & spacer, w/PS ................................... 15.00 set
M-2977 M-2756 M-2755
M-2454 68-74 Idler pulley lower mount kit, includes
bolt & spacer, w/o PS (V).......................... 16.50 set
Crankshaft Pulley Mount
BL-387 68 Crank pulley mount bolts, 327,
M-2337 69-74 w/o PS Idler Pulley
E headmark (3)....................................... 7.00 set
BL-463 68 Crank pulley mount bolts, 327, M-2453
V upper
S headmark (3) ...................................... 7.50 set adjusting stud
BL-414 69-82 Crank pulley mount bolts, 350, LE
headmark w/washers (3) .......................... 9.00 set
BL-336 68-69E Crank pulley mount bolts, 427, TR
headmark w/washers (3) .......................... 6.00 set
BL-415 69L-74 Crank pulley mount bolts, 427 & 454,
TR headmark w/washers (3).................. 6.00 set
idler
BL-336 71 Crank pulley mount bolts, 454 LS6, pulley
TR headmark w/washers (3).................. 6.00 set lower mount kit
M-2313
T-323
Zip Products
www.corvettepartsblog.com
427 & 454 Valve Covers Valve Cover Grommets & Oil Cap
WS-494 68-74 Valve cover grommet, vent tube ................. 4.00 each
Valve Covers WS-490 68-74 Valve cover grommet, PCV valve ................. 4.00 each
VC-207 68-74 Valve covers, 427 & 454, chrome, includes M-2358 68-70 Valve cover oil cap, chrome reproduction
PB slant & drippers, replacement ............. 119.95 pair w/S logo on rivet ................................... 15.00
VC-315 70-74 Valve covers, 454, unpainted, includes WS-629 71-74 Valve cover oil rubber cap, Oil,
PB slant & drippers, replacement ............. 129.95 pair push-in style............................................... 6.00
VC-303* 68E Valve covers, 427, chrome ........................... 499.00 pair
VC-304* 68L-69 Valve covers, 427, chrome ........................... 489.00 pair
Note: 68 first design valve covers were used through January of 1968.
VC-301* 70-71E Valve covers, 454, chrome ........................... 499.00 pair
VC-320* 71L Valve covers, 454, unpainted ....................... 379.00 pair
Note: 71 first design valve covers used until VIN number 4000. M-2358 WS-490 WS-494 WS-629
VC-302* 72-74 Valve covers, 454, unpainted ....................... 379.00 pair
*High-quality reproduction covers designed to meet judging standards. Include 427 & 454 Spark Plug Wire Supports
drippers, spot welds, power brake slants and plug wire bracket locations as original. IS-226A 68-74 Plastic wire support, 4-wire w/stand ........... 3.50 each
IS-226C 68-74 Plastic wire support, 2-wire w/stand ........... 3.50 each
IS-370 69L-74 Metal wire support, RH valve cover ............ 18.50
VC-207
IS-226A IS-226C
IS-370 (2) (2)
VC-304
VC-302
W engine mount
X engine mount
OP-144
shim
OP-147
block bolt
to frame shield
bolt
block
frame bolt
bracket frame bolt
frame bracket
Oil Pump
M-3484 BL-395
OP-100 63-82 Oil pump, 327 & 350 w/hydraulic cam ....... 55.00
OP-101 70-72 Oil pump, LT-1 w/solid lifters....................... 66.50
OP-104 68-69 Oil pump, 427/435 hp & L88 ....................... 97.50
OP-102 68-74 Oil pump, 427 & 454 w/o Hi-Perf................ 72.00
OP-103 70-74 Oil pump, 454 Hi-Perf .................................. 79.50
OP-150 68-82 Oil pump attaching bolt, 327 & 350............ 4.00
OP-167 68-74 Oil pump attaching bolt, 427 & 454............ 3.00
M-3289 BL-394 M-2494 OP-151 68-79 Oil pump pick-up & screen,
replacement pan........................................ 29.50
OP-105 68-82 Oil pump pick-up & screen, 327 & 350 ....... 29.50
OP-106 68-74 Oil pump pick-up & screen, 427 & 454 ....... 25.00
OP-116 OP-123
OP-129
OP-119 M-2205
M-3575
insert
fitting
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 ENGINE 57
68-82_26_039-067_Engine_priced 6/12/10 9:27 AM Page 58
Distributor
68-74 Tach Drive Distributor
68-74 Tach Drive Distributor
Z
Distributor *points screw cap
M-199 68-74 Distributor, tach drive, single point *condenser screw
w/vacuum advance, 327 & 350
base motor................................................. 419.95 condenser
points
M-199H 68-74 Distributor, tach drive, single point
*spring
w/vacuum advance, Hi-Perf ...................... 419.95
M-3198 68-71 Distributor, T.I., complete ............................ 769.95 ground breaker
wire plate
M-2496 68-69 Hold down w/bolt, wire style ...................... 10.50
M-3046 68-74 Hold down w/bolt, flat ................................ 10.50
*screw
M-2341 68-74 Base gasket ................................................... 2.00 vacuum
advance
M-199 *felt seal rotor
*plastic seal
drive gear
HEI Tach Drive Distributor shim
Includes all-new distributor cap, points, rotor, condenser and plug wires. condenser screw, vacuum advance
M-3019 68-74 Ignition rebuild kit ....................................... 89.95 kit screws, breaker plate retention spring,
felt washer, plastic seal, cam drive
gear pin & lead wire grommet (Z) ........... 9.50 set
M-3448 68-74 Tach drive cross shaft gear (improved) (Z) 27.95
M-3447 68-74 Tach drive cross shaft gear washer (Z)........ 2.50
M-2342 M-3442
M-2544 68-74 Tach drive cross shaft gear button,
plastic (Z)................................................... 2.00
M-3414 M-215 68-74 Tach drive cross shaft gear brass
M-2347 M-1134 coupling (Z) ............................................... 18.50
M-2342 68-74 Vacuum advance, base motor (Z)................ 12.50
M-2352 68-74 Vacuum advance, Hi-Perf (Z) ....................... 12.50
SF-562 68-74 Vacuum advance mount hardware
(4 pcs) (Z) .................................................. 1.00 set
M-3606 68-74 Vacuum advance spring & weight kit (Z).... 10.50 set
M-215 M-216
M-3448 Distributor Internal Rebuild
M-1112 68-74 Tach drive gear set screw, eliminates Transistor Ignition Harness
excessive end play in tach gear ................ 1.50
TL-101 68-74 Set screw tap guide insert tool.................... 8.00 E-860 68E Transistor ignition amplifier extension
TL-102 68-74 Set screw threaded drill guide..................... 8.50 harness, 1st design, wiring coming out
M-307 68 Tachometer drive cable................................ 18.50 of amplifier ................................................ 34.00
M-334 69-74 Tachometer drive cable................................ 18.50 E-903 68L-71 Transistor ignition amplifier extension
M-2782 68-74 Tach cable adapter, 90 w/grease fittings harness, 2nd design, internal circuit
(prevents broken cables)........................... 39.95 board to auxiliary harness connector ....... 50.00
E-539 68E Transistor ignition wiring harness ............... 125.00
E-488 68L Transistor ignition wiring harness ............... 125.00
E-488 69-71 Transistor ignition wiring harness ............... 125.00
M-334
Note: Transistor ignition wiring harness connects distributor to amplifier.
E-902 68-71 Transistor ignition conversion kit ................ 9.00
M-2782
Note: T.I. conversion kit includes terminal and connectors same as used by factory
M-307 to convert engine and dash harnesses to accept transistor ignition. Kit is included
with E-539 and E-488 harnesses.
E-487 69-71 Transistor ignition extension wire,
ignition switch to T.I. harness ................... 16.00
Distributor Rebuild M-3444
Distributor continued
75-82 HEI Distributor Flame-ThrowerTM Kit
Includes everything needed for
Distributor stock HEI distributor: street/strip
M-2643 75-80 Distributor, HEI, rebuilt & blueprinted, module and coil combination,
replacement, w/vacuum advance ............. 169.95 rotor and cap, Flame-Thrower
M-2341 75-82 Base gasket ................................................... 2.00 coil cover, vacuum advance,
M-3046 75-82 Hold down w/bolt, flat ................................ 10.50 wiring harness, capacitor and
installation hardware.
75-82 HEI Distributor M-3753 75-80 Flame-Thrower tune-up kit .......................... 124.95
retainer
a
pole piece coil cover
washer
tang Ignition Coil
drive gear M-2338 68-74 Coil, STD ignition (replacement) ................. 27.50
M-2328 68-71 Coil, T.I. ignition (replacement)................... 89.50
E-484 68-71 Coil capacitor w/bracket (#01947452) ........ 21.50
ES-543 72-74 Coil capacitor w/bracket (#01852715) ........ 34.50
Internal Distributor Components MF-263 68-71 Coil decal, T.I. ignition ................................. 4.00
M-2561 75-82 Cap, HEI ignition (a) .................................... 25.00 M-3256 68-74 Coil terminal nuts, washers & retainer........ 11.00 set
E-400 75-81 Coil, HEI ignition (a)..................................... 84.50 IS-321 68-74 Coil bracket w/pinch screw, 427 1x4........... 17.50
M-2645 82 Coil, HEI ignition .......................................... 71.50 IS-328 68-69 Coil bracket w/pinch screw, 427 3x2........... 22.00
E-1115 75-82 HEI coil wiring harness pigtail ..................... 9.95 IS-321 68-74 Coil bracket w/pinch screw, 327 & 350....... 17.50
M-2657 75-80 Coil capacitor, 75-79 All & 80 L48 (a).......... 7.50 M-2605 68-74 Coil bracket mount bolts, Anchor
M-2650 75-82 Coil cover (a) ................................................ 12.00 headmark ................................................... 4.50 pair
M-2651 75-82 Coil cover screw ........................................... 5.50 SF-563 68-74 Coil bracket pinch screw .............................. 1.50
M-2647 75-82 Coil cover seal (a)......................................... 8.50 Note: See Internal Distributor Components section at left for 75-82 HEI coils.
M-2658 75-78 Ground wire (a)............................................ 3.50
M-2659 78-82 Ground wire (a)............................................ 3.50 M-2338 IS-321 IS-328
ES-353 75-80 Ignition module, HEI (a) .............................. 44.95
ES-352 81 Ignition module, HEI .................................... 59.95
ES-351 82 Ignition module, HEI .................................... 67.95
M-2347 75-82 Main drive gear (on bottom) (a)................. 35.00
M-3605 75-82 Main drive gear attaching pin ..................... .75
M-2655 75-82 Main drive gear lower washer tang (a)....... 3.50 M-2328
M-2649 75-80 Pole piece (a)................................................ 39.50
M-2648 81 Pole piece ..................................................... 45.00
M-2646 82 Pole piece ..................................................... 47.50
M-2656 75-82 Pole piece retainer (a).................................. 6.00 M-2605 MF-263 M-3256 E-484
M-2560 75-82 Rotor, HEI ignition (a) .................................. 9.50
M-2668 75-80 Small parts kit, includes drive gear pin,
felt washer, plastic seal, vacuum advance
screws & retention spring ......................... 9.50 set Correct Part Number Coil
M-2652 75-82 Terminal block w/capacitor (a).................... 27.50 New reproduction coils licensed by
M-2653 81-82 Terminal block to module wire .................... Call GM. Embossed with original part
M-3849 75-82 Tach filter, filter between distributor number and features Delco Remy logo
& tachometer............................................. 29.95 on tower. Available in standard and
transistor ignition. For NCRS or
M-2561 M-2648 E-400 Bloomington judging, call your Zip
sales representative for information.
M-2560
M-3095 68-72 Ignition coil #1115270, STD......................... 89.95
M-3096 68-72 Ignition coil #1115287, STD......................... 89.95
M-3089 68 Ignition coil #1115207, transistor................ 139.95
M-3093 68-71 Ignition coil #1115263, transistor................ 139.95
M-3094 68-71 Ignition coil #1115272, transistor................ 139.95
ES-353
M-3908 E-551
M-3907 68-74 Spark plug wires, 327 & 350 (b).................. 44.95 c
M-3909 75-77 Spark plug wires, HEI ................................... 49.95 set
M-3908 78-82 Spark plug wires ........................................... 49.95
IS-218 68-74 Spark plug wires, 427 & 454, braided (c).... 125.00
4-hole
SF-573 68-74 Spark plug wire to distributor shield grommet
grounding nuts (c) .................................... 1.50 pair
4-wire
support IS-207B
2-wire support
IS-301 IS-329
427 & 454 Shielding Kit
Includes distributor surround,
IS-408
brackets with grommets, and
wing bolts to fasten shields to
engine block. Kit does not
include inner plug heat shields
IS-382
and lower V wire shields.
d surround top e distributor cover IS-408 68-70 Ignition shield set, 1x4................................. 149.95 kit
IS-409 68-69 Ignition shield set, 3x2................................. 149.95 kit
wing
bolt IS-410 71-74 Ignition shield set......................................... 74.95 kit
grommet
surround
wing
bolt
4-hole
grommet 327 & 350 Shielding Kit
Includes outer shields, brackets with grommets, and wing bolts to fasten
shields to engine block. Kit does not include inner plug heat shields
and lower V wire shields.
cover cover
bracket bracket
4-hole grommet
IS-345
Plug Shields
IS-330 70-74 Plug tube shields, 454 (8 per car)................ 6.00 each
IS-330
(8)
Zip Gift Cards! IS-417 68 Ignition shield set, 327................................. 399.95 kit
IS-416 69 Ignition shield set, 350................................. 399.95 kit
IS-345 70E Ignition shield set, 350................................. 399.95 kit
IS-346 70L-72 Ignition shield set, 350................................. 259.95 kit
IS-384 73-74 Ignition shield set, 350................................. 259.95 kit
IS-415 75-77 Ignition shield set......................................... 259.95 kit
J-nut
distributor cover lower V shield right rear shield
surround wing bolt
top
IS-316
right rear shield left front shield
IS-315 IS-212
WP-122 68-70 Basic water pump rebuild kit, 327 & 350 .... 42.50 kit
WP-121 68-69 Basic water pump rebuild kit, 427 ............... 65.00 kit
WP-116 68-70 Deluxe water pump rebuild kit, 327 & 350 65.00 kit
ZWP-109
WS-501
M-2218 M-2599
M-3536
Zip Products
www.corvettepartsblog.com
M-2529 M-3580
M-2527 M-2526
10% off
Restorers Discount
10% off
Restoration Club
82 Fan Belts
FB-441 82 Air condition belt (#9433916) ..................... 26.00
FB-439 82 Alternator belt, w/70 amps (#9433761)...... 26.00
FB-438 82 Alternator belt, w/o 70 amps (#9433760) .. 26.00
FB-442 82 Smog pump belt (#9433613)....................... 26.00
FB-440 82 Power steering belt (#9433622) .................. 26.00
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 ENGINE 67
68-82_26_068-073_Exhaust_priced 6/13/10 8:35 AM Page 68
Muffler Hangers
EX-326 68-72 Muffler hanger kit ........................................ 26.95 car
EX-394 73 Muffler hanger kit ........................................ 34.95 car
front
EX-330 74 Muffler hanger kit ........................................ 32.95 car front hanger
BL-486 68-72 Muffler hanger mount bolts, WB hanger clamp bracket clamps
bracket
headmark bolts w/washers & nuts ........... 9.50 car
EX-326
EX-330 EX-394 A B
68-74 Manual Trans Hanger 68-74 Automatic Trans Hanger
EX-426
EX-388
See inside back cover for special freight charges (2) and (4)
Side Exhaust
69 Side Exhaust
Side Exhaust Covers
EX-384 69 Side exhaust covers, includes LH & RH E front molding
mount
screw
shield assemblies, front braces & mount rear molding
screws (ND) (E) .......................................... 2,250.00 pair center molding
EX-2067 69 Cover front molding (LH or RH) (ND) (E) ... 215.00 each
front
EX-2066 69 Cover center molding (LH or RH) (ND) (E) (1)259.00 each brace
EX-2068 69 Cover rear molding (LH or RH) (ND) (E) ..... 185.00 each
EX-389 69 Cover front brace w/mounting screws
& rivets (LH or RH) (E) .............................. 38.50 each
EX-574 69 Cover mount screws w/retainers, correct
screws with original-style retainers (E)..... 13.00 car
EX-329 69 Cover rear support bracket (LH or RH) (E) 18.50 each
muffler
to frame
hanger kit
EX-575
EX-576
Fiberglass Covers
EX-731 68-74 Side exhaust package, 327/350 ................... (4)
829.95
EX-732 68-69 Side exhaust package, 427........................... (4)
829.95
EX-733 70-74 Side exhaust package, 454........................... (4)
829.95
Reproduction Covers
EX-734 68-74 Side exhaust package, 327/350...................(4)2,599.95
EX-735 68-69 Side exhaust package, 427 ..........................(4)2,599.95
EX-736 70-74 Side exhaust package, 454 ..........................(4)2,599.95
www.zip-corvette.com order toll-free: 1-800-962-9632
Mufflers
Aluminized Mufflers Muffler Application Chart
Exact replica of factory-original muffler in appearance, fit and Year Application Size Oval Round
sound. Features aluminized case, end caps and 14-gauge (.70 wall) 68 327 & 427 ............................... 2 1/2 EX-422
inlet and outlet pipes. Hand-jigged and MIG welded for a precise fit. 69 350 & 427 ............................... 2 EX-421
Uses single mount bracket for installation as original. Zip Products 70-72 350 w/o LT-1 .......................... 2 EX-421
3-YEAR LIMITED WARRANTY AGAINST CORROSION. Warranty does 70-72 LT-1 & 454 .............................. 2 1/2 EX-422
not cover damage due to out-of-time backfires. 68-72 mufflers are 73 350 L48 ................................... 2 EX-468
correct low-profile ovals and use a single mount bracket as original; 73 350 L82 & 454 ........................ 2 1/2 EX-476
73-77 have correct round appearance; 78-82 are low-profile ovals 74 350 L48 ................................... 2 EX-437 EX-474
with welded turndown outlets. 74 350 L82 & 454 ........................ 2 1/2 EX-438 EX-473
EX-421 68-72 Muffler w/2 inlet (LH or RH)...................... 69.95 each 75-77 All............................................ 2 1/4 EX-439 EX-475
EX-422 68-72 Muffler w/2 1/2 inlet (LH or RH) ............... 69.95 each 78 L48 .......................................... 2 1/4 EX-439
EX-468 73 Muffler, 2 inlet (LH or RH) ......................... 72.95 each 78 L82 .......................................... 2 1/2 EX-440
EX-476 73 Muffler, 2 1/2 inlet (LH or RH)................... 72.95 each 79-82 All............................................ 2 1/2 EX-440
EX-474 74 Muffler, 2 inlet (LH or RH) ......................... 72.95 each
EX-473 74 Muffler, 2 1/2 inlet (LH or RH)................... 72.95 each
EX-475 75-77 Muffler, 2 1/4 inlet (LH or RH)................... 72.95 each Muffler Hangers
EX-439 78 Muffler w/2 1/4 inlet (LH or RH) ............... 69.95 each EX-326 68-72 Muffler hanger kit (F) .................................. 26.95 car
EX-440 78-82 Muffler w/2 1/2 inlet (LH or RH) ............... 69.95 each EX-394 73 Muffler hanger kit ........................................ 34.95 car
EX-2075 68-72 Off-Road Muffler stamp kit ...................... 21.50 EX-330 74 Muffler hanger kit ........................................ 32.95 car
EX-331 75-77 Muffler hanger kit ........................................ 28.95 car
EX-332 78-82 Muffler hanger kit (G).................................. 36.95 car
EX-422 BL-486 68-72 Muffler hanger mount bolts, WB
headmark bolts w/washers & nuts ........... 9.50 car
BL-495 73-77 Muffler hanger mount bolts, M
headmark bolts w/washers & nuts ........... 5.50 car
BL-506 78-82 Muffler hanger mount bolts, bracket
EX-475 to frame mount ......................................... 2.50 car
Tuck-Under Mufflers
Replacement for OE round-shaped mufflers on 74-77 Corvettes.
Zips low-profile tuck-under oval mufflers have welded turndown
outlets and feature fully aluminized cases, end caps and inlet and
outlet pipes.
EX-437 74 Muffler w/2 inlet (LH or RH)...................... 69.95 each
EX-438 74 Muffler w/2 1/2 inlet (LH or RH) ............... 69.95 each
EX-439 75-77 Muffler w/2 1/4 inlet (LH or RH) ............... 69.95 each
Exhaust Bezels
EX-737 68-69 Rear exhaust bezels, die cast chrome.......... 74.95 pair
EX-472 68-69 Rear exhaust bezels, stainless ...................... 87.95 pair
EX-738 70-73 Rear exhaust bezels, die cast chrome.......... 74.95 pair
EX-471 70-73 Rear exhaust bezels, stainless ...................... 87.95 pair
ZSF-336 68-69 Rear exhaust bezel screws w/J-nuts............. 6.50 car
ZSF-337 70-73 Rear exhaust bezel screws w/J-nuts............. 6.50 car
BL-488 68-73 Rear exhaust panel nut plates w/rivets,
includes (4) plates & (8) rivets.................. 13.00 car muffler
muffler hanger kit
BL-489 68-73 Rear exhaust panel bolt & nut kit (14 pcs) 13.50 car
hanger kit
F G
EX-472
68-72 Muffler Hanger 78-82 Muffler Hanger
BL-488
EX-385
EX-706
EX-705
EX-723 EX-724
EX-565
EX-220
EX-566
BL-205C BL-205D
327 & 350 Exhaust Manifold Hardware
EH-401 80-81 Oxygen sensor .............................................. 34.95 EX-565 68-80 Manifold gasket set, 327 & 350 ................... 9.50 car
EH-415 82 Oxygen sensor .............................................. 29.95 EX-566 68-74 Manifold gasket set, 427 & 454 ................... 14.50 car
Note: Exhaust manifold gaskets were not originally used on Corvettes.
EX-121
M-173
10% off
Restoration Club
Zip Resto Tip: Exhaust Manifolds
Cast iron exhaust manifolds will begin to rust at the first sign of
moisture, leaving your engine compartment looking decidedly less
than Best of Show. Begin removing the manifolds by first liberally
spraying all bolts with penetrating oil. Repeat this step at least three
or four times over the next hour. The last thing you want is studs
twisted off into the base of your manifold have patience and take
your time with the following steps. Once all bolts are well soaked,
loosen the three manifold to pipe stud nuts. With a wire brush,
clean the stud under the nut and apply more penetrating oil. Now
you can slowly remove the nuts. Next unbolt the manifolds from the
head (these bolts are grade 8 and rarely cause problems). Bead
blast or wire brush the manifolds to clean off all traces of rust, then HOW IT WORKS If youre planning major repairs or a complete
wipe them down using a small amount of lacquer thinner. Do not ground-up rebuild, our Restoration Club discount is unbeatable.
wash the manifolds as cast iron absorbs water. Youll get 10% savings on an initial purchase of $2,000.00 or more
from this catalog or Zips Web store, then additional 10% discounts
After cleaning, apply Calyx manifold dressing. The secret to applying on subsequent orders of $50.00 or more for the next 12 months!
this cream is to slowly rub it into the manifold, working it down Some restrictions apply, call your sales representative for details.
into the pores of the cast iron. Dont use too much, as you only
want to change the color of the piece. Reinstall the freshly restored
manifolds, step back and admire the results!
Automatic Transmission
Flex Plate & Mounting Automatic Rebuild Kit TM-178
BL-596 68-81 Transmission to block bolts (6).................... 9.50 set Includes everything needed to
TM-143 68-77 Flex plate, TH 400, replacement (A)............ 49.50 return transmission to original
TM-142 75-81 Flex plate, TH 350, replacement (A)............ 49.50 level of performance: gaskets,
CL-157 68-69 Flex plate & converter underpan (A)........... 31.50 bushings, seals, washers,
CL-158 70-74 Flex plate & converter underpan (A)........... 43.50 clutch discs, O-rings, clutch
CL-159 75-82 Flex plate & converter underpan (A)........... 40.00 brake band and filter kit.
BL-508 68-74 Flex plate & converter underpan TM-178 68-77 Transmission rebuild kit, TH 400 ................. 169.95 kit
bolts (4) (A) ............................................... 4.50 set TM-179 75-79 Transmission rebuild kit, TH 350 ................. 189.95 kit
TM-180 80-81 Transmission rebuild kit, TH 350 ................. 179.95 kit
Flex Plate & Underpan TM-181 82 Transmission rebuild kit, 700R4 ................... 199.95 kit
block bolt
A
Transmission Filter & Dipstick
M-2551 68-77 Transmission filter & gasket kit, TH 400...... 12.00 kit
M-2552 75-81 Transmission filter & gasket kit, TH 350...... 12.00 kit
M-2553 82 Transmission filter & gasket kit, 700R4 ....... 23.50 kit
M-2896 68-73 Transmission fluid dipstick ........................... 14.50
M-2895 74-81 Transmission fluid dipstick ........................... 14.50
M-2890 68-73 Transmission fluid fill tube ........................... 18.50
flex plate
M-2888 74-77 Transmission fluid fill tube, TH 400 ............. Call
underpan bolt
M-2887 78-81 Transmission fluid fill tube ........................... Call
M-2891 68-77 Transmission fluid fill tube seal.................... 3.50
underpan
M-2892 78-82 Transmission fluid fill tube seal.................... 3.50
TM-303 68-77 Transmission oil pan, TH 400 ....................... 95.00
TM-304 75-81 Transmission oil pan, TH 350 ....................... 50.00
Transmission Cooler TM-305 82 Transmission oil pan, 700R4......................... 28.00
Z-601 68 Radiator cooler pipe (2 per car) (B) ............ 12.50 each M-2896
TM-127 69-82 Radiator cooler outlet pipe (B) .................... 12.50
TM-128 69-72 Radiator cooler inlet pipe, 350 (B) .............. 12.50 M-2551
TM-129 69-75 Radiator cooler inlet pipe, 69-72 427
& 454 & 73-75 All (B) ................................ 14.50
TM-130 76-82 Radiator cooler inlet pipe (B) ...................... 12.00
TM-306 68-82 Transmission cooler hoses w/clamps (B)..... 15.50 set
HC-225M 68-71 Transmission cooler hose clamps (B)........... 12.50 set
CZ-604 68-69 Transmission cooling lines, stainless
w/C clips, 327 & 427 (B)........................ 64.50 pair TM-303
CZ-602 70-79 Transmission cooling lines, stainless
w/C clips, 350 (B) .................................. 64.50 pair Transmission Detent Control
CZ-603 70-74 Transmission cooling lines, stainless M-2885 76-80 Transmission detent control cable............... 24.00
w/C clips, 454 (B) .................................. 89.50 pair M-2884 81 Transmission detent control cable............... 25.00
CZ-1098 68-82 Transmission cooling line clamps & screws
to frame crossmember (B) ........................ 4.75 set Note: Transmission detent cables run from carburetor to transmission.
CZ-1038 68-82 Transmission line C clips, holds lines M-2893 76-82 Transmission detent cable seal, for use
together (3) (B) ......................................... 7.50 set w/M-2885 & M-2884 ................................. 3.50
SU-420
Shifter
Automatic Transmission Auto Shifter Rebuild Kit
Everything needed to return your
Shifter original shifter to crisp performance
ST-384 68-76 Shifter, rebuilt, rechromed shaft is included in Zips rebuild kit: new
w/new knob & button (C) ........................ 159.95 shifter ball, button, upper spring,
ST-385 77-82 Shifter, rebuilt, rechromed shaft lower spring, neutral safety switch
w/new knob & button............................... 159.95 screws, handle to lower shaft
ST-382 68-82 Ball, black...................................................... 16.50 bushings, and shifter shaft retainer.
ST-383 68-82 Ball chrome push button ............................. 10.50 ST-492 68-82 Shifter rebuild kit ......................................... 31.95 kit
SPR-142 68-82 Ball push button spring................................ 4.50
WS-635 68-76 Lower shifter seal, mounts to tunnel (C) .... 18.00
BL-509 68-76 Lower shifter seal screws (12) (C) ............... 6.50 set
Automatic Neutral Safety Switch
ES-466 68 Neutral safety switch (D) ............................. 54.95
WS-635 ES-467 69-72 Neutral safety switch (D) ............................. 54.95
WS-638 ES-468 72-73 Neutral safety switch (D) ............................. 54.95
ES-469 74-75 Neutral safety switch (D) ............................. 54.95
ES-307 76-82 Neutral safety switch (D) ............................. 54.95
ST-384
SF-645 68-82 Neutral safety switch mount screws (D) ..... 2.50 pair
Note: Automatic neutral safety switch mounts directly to shifter.
See page 124 for 77-78 neutral safety switch extension harness
ST-396 ST-382
ST-383 SPR-142
mount screw
neutral
safety switch
U clip floorboard
screw E clip
interlock cable shifter
cable clip cable retainer ZDB-45 ST-337
(2)
seal screw
lever pin
lower shifter seal
control cable
U clip cable transmission bracket
C Shifter Interlock
Shifter Interlock
ST-337 69-76 Column interlock cable, transmission to
steering column, includes correct
steel outer sheath as original (C) ............. 42.50
ZDB-45 69-76 Column interlock cable clip (2 per car) (C).. 1.50 each
upper
cable
transmission mount
ES-476
mount bracket
Cruise Control Components
M-3225 77-81 Cruise control pedal release switch ............. Call
M-3226 82 Cruise control pedal release switch ............. 26.50
M-2557 77 Cruise control servo (H) ............................... Call
mount to bracket bolts M-2556 78-79E Cruise control servo, metal (H) ................... Call
M-2558 79L-81 Cruise control servo, plastic (H) .................. Call
bracket to crossmember bolts M-2559 82 Cruise control servo (H) ............................... Call
M-3103 77-80 Cruise control transducer, rebuilt (H) ......... 134.95
M-3104 81-82 Cruise control transducer, rebuilt (H) ......... 134.95
WS-647
WS-459 TM-302
Transmission Mount
Tunnel Insulation
tunnel
insulator
rivet
M-3226
M-3103
M-2558
clip Cruise Control Components
foam collar
M-255A
M-236 (2)
(2)
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 TRANSMISSION & SHIFTER 77
68-82_26_074-083_Trans&Shifter_priced 6/13/10 9:08 AM Page 78
TM-247
TM-251
Mainshaft
TM-212 68-74 Mainshaft rear bearing (I6) ......................... 23.50
TM-240 68-74 Mainshaft reverse sliding gear (I17) ........... 105.00
TM-226 68-74 Mainshaft roller & cage set (I3) .................. 25.00
TM-212
TM-216
Transmission Rebuild Small Parts Kit
TM-226
TM-211
TM-210
TM-223
Zip Gift Cards! See page 18 for driveshaft U-joint straps and bolts
TM-241 TM-131
Zip Products
www.corvettepartsblog.com
www.zip-corvette.com order toll-free: 1-800-962-9632
I16
I18
** *
*
** I7
I5
I4 I15
* *
I8
I10
I12
I11 * I9
I10 I14
I14
I10
I13
I14 *
*
* I14
I20
I10 I21
I9
I19
I
68-74 4-speed Muncie Transmission Components
Gears
TM-237 68-74 Gear, 1st, 36 teeth (I16) .............................. 135.00
TM-238
TM-232
TM-233
TM-230
68-71
68-74
68-71
68-74
Gear, 1st, 36 teeth, M22 only (I16).............
Gear, 2nd, 30 teeth (I12).............................
Gear, 2nd, M22 only (I12) ...........................
Gear, 3rd, 27 teeth (I11) .............................
209.00
115.00
209.00
85.00
10% off
Restorers Discount
TM-231 68-71 Gear, 3rd, M22 only (I11)............................ 209.00
TM-243 68-74 Idler gear front washer (I19)....................... 11.50
TM-244 68-71 Idler gear, front, M22 only........................... 129.00
TM-245 68-74 Idler gear, rear (I20) .................................... 98.00
TM-252 68-74 Gear shift fork, Muncie
(2 per transmission) (I21)......................... 49.50 each
TM-207 75-81 Gear shift fork, Borg-Warner
(2 per transmission) .................................. 35.00 each
TM-235
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST TRANSMISSION & SHIFTER 79
68-82_26_074-083_Trans&Shifter_priced 6/29/10 5:40 PM Page 80
ST-415
10% off
Restoration Club
ST-412
ST-415
ST-414
68
69-73
74-76
Shifter
Shifter
Shifter
&
&
&
linkage
linkage
linkage
kit .....................................
kit .....................................
kit .....................................
249.95
249.95
249.95
kit
kit
kit
ST-413 77-81 Shifter & linkage kit ..................................... 249.95 kit
Shifter Repair
ST-310 68-76 T-handle w/lock-out rod, 8 rod (J) ............. 15.95
ST-315 77-81 T-handle w/lock-out rod, 9 rod .................. 15.95
SPR-143 68-75 T-handle reverse lock-out spring ................. 3.95
SPR-144 76-81 T-handle reverse lock-out spring ................. 3.95
Shifter Linkage
69-73 Shifter & Linkage ST-210 68 Linkage set.................................................... 69.95 set
rear bracket ST-311 69-73 Linkage set (J)............................................... 69.95 set
J clevis pin ST-399 74-76 Linkage set.................................................... 69.95 set
ST-398 77-81 Linkage set.................................................... 69.95 set
cable knob
clip T-handle Note: Linkage sets include all necessary transmission levers, rods, clevis and
w/lockout
front bracket hardware for connecting shifter to transmission.
seal
ST-406 68-81 Linkage adjusting tool.................................. 3.00
shifter screws ZST-129 68-81 Linkage clevis pin wire G clip (J) .............. 1.25 each
ST-517 69-76 Linkage clevis pin w/clip (j) ......................... 1.50
ST-483 68 Transmission lever, 1st to 2nd (J) ................ 10.75
ST-484 68 Transmission lever, 3rd to 4th (J) ................ 10.75
ST-485 68 Transmission lever, reverse (J) ..................... 10.75
interlock
cable lower ST-486 68 Transmission lever mount nut (3) ............... 1.50 set
shifter ST-501 69-73 Transmission lever, 1st to 2nd or
seal
3rd to 4th (J).............................................. 10.75
ST-500 69-73 Transmission lever, reverse (J) ..................... 15.50
mount bolts 1st to shifter ST-499 69-73 Transmission lever mount bolt & nut
2nd lever mount
bracket set (9 pcs) (J) ............................................. 3.50 set
3rd to reverse lever linkage
G clip ST-498 74-76 Transmission lever, 1st to 2nd or
4th lever
3rd to 4th................................................... 10.75
ST-497 74-76 Transmission lever, reverse .......................... 10.75
ST-495 77-81 Transmission lever, 1st to 2nd ..................... 10.75
Shifter Interlock ST-494 77-81 Transmission lever, 3rd to 4th ..................... 10.75
ST-493 77-81 Transmission lever, reverse .......................... 10.75
ST-324 69-75 Column interlock cable, transmission to ST-496 74-81 Transmission lever mount bolt & nut
steering column, includes correct set (9 pcs) .................................................. 1.50 set
steel outer sheath as original (J)............... 42.50
ZDB-45 69-76 Column interlock cable clip (2 per car) (J) .. 1.50 each Note: Zip stocks all parts available for repairing your original shift linkage.
ST-373 69-75 Cable transmission front bracket (J)............ 8.50 If youre in need of an individual clevis, rod or lever, call your Zip Products sales
ST-397 69-75 Cable transmission rear bracket (J) ............. 10.00 representative for more information.
ST-406
ST-397 ST-373
ZDB-45 ST-324
ST-311
Back-Up Light Switch
ES-444 68-78 Back-up light switch, reproduction (K) ....... 62.95
ES-445 79-80E Back-up light switch, reproduction.............. 62.95
ES-515 80L-81 Back-up light switch, reproduction.............. 69.95
E-873 78 Back-up light switch extension harness,
L48 engines w/4-speed transmission........ 19.00
ST-229 68-73 Back-up light switch bracket (K).................. 12.50
ST-508 74-81 Back-up light switch bracket........................ 22.00
ST-330 68-74 Back-up light switch rod w/clips (K) ........... 8.00
Linkage Set
ST-491 75-81 Back-up light switch rod w/clips.................. 11.00
ST-487 68-74 Back-up light switch rod clips (2) (K) .......... .75 pair Upper Shifter Boot
ZST-332 75-81 Back-up light switch rod clips (2) ................ 1.25 pair ST-503 68E Upper shift boot, rubber (1 fold) ................ 34.50
ST-334 68-81 Back-up light switch screws & washers (K) 1.50 set WS-657 68L-69 Upper shift boot, rubber (2 fold) ................ 34.50
ST-230 68-73 Back-up light switch shield (K) .................... 8.00 WS-637 70-76 Upper shift boot, leather ............................. 27.95
ST-505 70-76 Upper shift boot, leather (colors)................ 29.95
Back-Up Light Switch Note: 70-76 leather shift boots will fit 68-69 Corvettes.
rod clip
back-up light
switch ST-229
ST-503 WS-657 WS-637 WS-638
shield
Zip Products
rod
ST-230
www.corvettepartsblog.com
switch screws
ES-444 ST-330
CL-227
(casting detail)
CL-198 BL-412
Fork Components
CL-101 68-81 Fork, includes bearing retainer (M)............. 84.50
CL-175 68-81 Fork repair kit, includes throw-out
bearing clip w/rivet ................................... 7.50 kit
CL-102 68-81 Fork to bellhousing ball stud (M) ................ 10.00
ZWS-404 68-81 Fork bellhousing rubber boot (M)............... 10.00
WS-4611 68-81 Fork bellhousing rubber boot (GM) (M)..... 16.00
CL-117 CL-106 68-81 Fork push rod (M) ........................................ 16.50
M-2231 68-81 Push rod anti-rattle spring (2 per car) (M) 3.50 each
CL-104 68-81 Push rod to fork attaching pin (M) ............. 3.00
ZST-129 68-81 Push rod to cross shaft wire G clip (M) ... 1.25 each
CL-162 68-81 Throw-out bearing (M) ................................ 22.00
E-579
CL-162 CL-106
CL-154 M-2231
CL-101 (2)
82 TRANSMISSION & SHIFTER Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_074-083_Trans&Shifter_priced 6/13/10 9:08 AM Page 83
M-3313
WS-604
WS-604A
throw-out
fork bearing
fork boot fork pin retaining clip bushings
ball stud
CZ-426
A plate gasket
plate
gasket
mount
bolt
plate bolt
CZ-1114
BL-357 CZ-1027
CZ-436
CZ-1022
CZ-444
Fuel Flex Hose
Replacement Fuel Pump Connects frame fuel line to fuel pump or gas tank. Includes correct
New replacement unit has overall appearance of a factory-original clamps for installation.
pump but does not have AC casting on main body. Z-806 68-69 Fuel pump to frame line hose...................... 6.00
Z-423 68-69 Replacement fuel pump, 427 ....................... 34.95 CZ-804 70-82 Fuel pump to frame line hose,
CZ-443 68-69 Replacement fuel pump, 327 & 350 ............ 34.95 molded S (B) .......................................... 12.00
CZ-424 70-72 Replacement fuel pump, LT-1 ...................... 34.95 CZ-807 68-82 Fuel pump vapor return line hose, fits
Z-433 70-76 Replacement fuel pump, 350 ....................... 34.95 68-82 except 3x2 & L88, 70-72 LT-1 (B) ... 9.00
CZ-432 70-74 Replacement fuel pump, 454 ....................... 34.95 ZGT-271 68-69 Tank to frame line hose................................ 6.00
Z-434 77-81 Replacement fuel pump ............................... 34.95 Z-979 70-74 Tank to frame line hose (C) ......................... 6.00
CZ-1062 82 Fuel pump, electric ....................................... 67.50 Z-978 69-74 Tank to vapor return line hose (C) .............. 6.00
ES-511 82 Fuel pump relay, electrical ........................... 32.50 ZM-2570 70-77 Vapor canister to frame line hose................ 5.50
ZHC-515 68-82 Fuel system hose clamps, includes
(2) 1/2, (2) 9/16, (2) 5/8 & (2) 3/4
Z-423 Z-433 spring clamps (B)(C) ................................. 4.00 kit
clamp C
vapor
return
Z-979 hose
ZHC-515
Z-434 CZ-1062 clamp
frame line hose
CZ-804
ES-511 vapor
clamp return
hose
Zip Products
www.corvettepartsblog.com
B clamp
68-69 300 & 350 hp Fuel Line 68-69 3x2 Fuel Line
clip bolt
D fuel line E clip
clip
hose kit
GF432
filter
filter ZDB-342
bracket fuel line kit
fuel line
tank to pump
clip bolt
clip CZ-144
RH vent line
CZ-152
F clip
CZ-1120
68-77 Tank to Pump Fuel Lines
CZ-706
Z-980
Left-hand (LH) = drivers side; right-hand (RH) = passenger side CZ-1012 CZ-1013
See inside back cover for special freight charge (3)
G
unleaded fuel decal Locking Gas Cap
Protect your Corvette from fuel
theft or gas tank vandalism with
door
a locking gas cap. Original-style
door emblem ABS plastic or chrome plated
metal with positive locking X-206-3 X-206-2
acorn nut
action. Includes pair of keys.
door to X-206-2 68-74 Locking gas cap, chrome.............................. 37.95
hinge screw X-206-3 75-82 Locking gas cap, ABS.................................... 13.95
hinge spring retainer pin bushing
door
bumper
hinge pin Overflow Hose
GT-265 68-82 Overflow hose (H) ........................................ 6.00
GT-264 68-82 Overflow hose nipple (H) ............................ 4.00
MF-364 GT-308 68-74 Overflow hose black T-shaped strap (H) ..... 2.50
SPR-150 68-74 Overflow hose support spring (H)............... 7.00
bezel
T-328 T-316
T-326
T-307 T-327
WS-4403 68-74 Overflow hose kit ......................................... 20.00 kit
Gas Tank
GT-322 68-69E Gas tank, 400 & 435 hp, unvented,
no tubes, w/logo ....................................... (1)
229.95 Tank Installation Kit
GT-394 68-69E Gas tank, 400 & 435 hp, unvented, Includes tank straps with anti-squeak pads, strap bolts and tank lower
no tubes ..................................................... (1)
199.95 support anti-squeak pads. 68-74 kit also includes filler neck screws.
GT-323 68-69E Gas tank, 300, 350 & 390 hp, unvented, GT-383 68-74 Gas tank installation kit................................ 49.95
RH fuel return, w/logo .............................. (1)
229.95 GT-382 75-77 Gas tank installation kit................................ 39.95
GT-395 68-69E Gas tank, 300, 350 & 390 hp, unvented, GT-381 78-81 Gas tank installation kit................................ 39.95
RH fuel return ............................................ (1)
199.95
GT-326 69L-70 Gas tank, 69 400 & 435 hp, 70 LT-1 w/o
EEC, vented, no tubes, w/logo ................. (1)
229.95
GT-396 69L-70 Gas tank, 69 400 & 435 hp, 70 LT-1 w/o Tank Mounting
EEC, vented, no tubes ............................... (1)
199.95 U-228 68-74 Tank lower support, reconditioned (J) ........ Call
GT-327 69L-70 Gas tank, 69-70 300, 350 & 390 hp, w/o GT-320 68-82 Tank lower support bolts, replacement (J).. 3.50 set
EEC, vented, RH fuel return, w/logo ........ (1)
229.95 BL-583 68-82 Tank lower support bolts, correct................ 6.00 set
GT-397 69L-70 Gas tank, 69-70 300, 350 & 390 hp, w/o ZGT-254 68-77 Tank lower support anti-squeak pads (J)..... 4.00 pair
EEC, vented, RH fuel return ...................... (1)
199.95 ZGT-242 78-82 Tank lower support anti-squeak pads.......... 4.50 pair
GT-325 70-72 Gas tank, 70 LT-1 w/EEC & 71-72 LT-1, GT-319 71-74 Tank rear plastic shield................................. 19.50
vented, LH fuel return, w/logo ................. (1)
229.95 GT-356 68-74 Tank straps (I)(J)........................................... 28.50 pair
GT-398 70-72 Gas tank, 70 LT-1 w/EEC & 71-72 LT-1, GT-359 75-77 Tank straps.................................................... 28.50 pair
vented, LH fuel return ............................... (1)
199.95 GT-357 78-82 Tank straps.................................................... 28.50 pair
GT-324 70-74 Gas tank, 70-72 w/o LT-1 & 73-74 All, ZGT-258 68-77 Tank strap anti-squeak pads (I) ................... 4.00 pair
vented, LH & RH fuel returns, w/logo (I).. (1)
229.95 GT-299 68-77 Tank strap mount bolt (2 per car) ............... 2.00 each
GT-399 70-74 Gas tank, 70-72 w/o LT-1 & 73-74 All,
vented, LH & RH fuel returns (I) ............... (1)
199.95
70-74 Fuel Tank
Note: Vent is located in top of tank. 68-69-Early tanks include small round side
strap
indentations; 69-Late-74 include large rectangular side indentations. I Z-978
GT-349 75-77 Gas tank, does not include rubber liner...... (2)
219.95
gas tank GT-380
GT-387 78-82 Gas tank, does not include liner .................. (2)
249.95
GT-380 70-74 Gas tank vapor separator, plastic can
mounting on LH side of tank (I) ............... 50.00 return
hose
Zips reproduction tanks match the factory unit in shape, indents, welds, anti-squeak
pads
connections and internals. Rust-resistant .032 Ni-Terne steel twice
leak tested to ensure total satisfaction and performance. Available with vapor separator
or without authentic O.L. Anderson stamped logo as original.
vent
support gasket
anti-squeak pad bolt
strainer
sending unit
GT-327
strap tank cam
support
J K
68-74 Tank Strap 68-74 Sending Unit
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 FUEL 87
68-82_26_088-105_Body&Fiberglass_priced 6/14/10 4:08 PM Page 88
M-2920 M-2601
M-3099 M-2660
ZM-2684 M-3727
Body Reinforcements
M-300 M-3099 68-82 Body mount #1 reinforcement
(LH or RH) (A) ........................................... 6.50 each
M-3898 68-82 Body mount #1 reinforcement backplate.... 10.50 each
M-2601 68-82 Body mount #4 reinforcement
(LH or RH) (A)(C) ...................................... 48.50 each
M-302
Body Mount Kits
Body Cushions & Shims
M-2947 73-82 Body mount cushion, rubber, includes
upper & lower (B) ..................................... 19.50 each ZM-2568
SU-386 73-82 Body mount cushions, polyurethane ........... 59.95 car (2)
BL-554 73-82 Body mount bolt & shim kit ........................ 42.95 kit
ZM-2511 68-82 Body mount square nut (A) ......................... 6.50 pair ZM-2569
M-2510 68-82 Body mount nut cage w/rivets, #4 (A)(C)... 8.00 each (2)
ZM-2567
M-225 68-82 Body mount square metal shim (A)(B) ....... 1.75 each (2)
M-3661 68-82 Body mount U-shaped shim (A) .................. 2.00 each
#4 bracket #4
reinforcement
shim B
#3 bracket
#1
reinforcement
shim
metal
shim shim
#2 bracket
cushion
#1 bracket shim
#1 body
mount
#2 body mount
Body Structure
E
upper header
corner
D access plate M-3293
Body Mount Access side post
M-3662
lower
Body Lift Kit center
Body Assembly Rivets Hidden rust in third generation Corvettes can be found in the birdcage rocker
Correct rivets used in complete body assembly and attachment of channels especially the #2 and #3 body mounts. Zips repair components include
body reinforcements. Large flat head rivet is correct soft aluminum a front insert (mounts into #2 position), a rear insert (#3 position and rear pillar),
with concentric rings on underside of head. and a center sleeve that fits under the existing rocker channel. Depending on the
amount of rust evident, you may find it best to use all three pieces. Rocker channel
ZM-2682 68-79 Large flat head aluminum rivet, repair requires body removal and cutting/welding.
3/16 diameter x 5/8 long (50 pack)...... 8.50 set
M-236 68-79 Large flat head aluminum rivet,
3/16 diameter x 5/8 long ...................... .50 each
M-3663 68-79 Large flat head aluminum rivet,
3/16 diameter x 3/8 long (50 pack)...... 8.50 set
Windshield Frame
M-3664 68-79 Large flat head aluminum rivet, A common condition in Shark
3/16 diameter x 3/8 long ...................... .50 each Corvettes is rusted windshield
frames. Water collects under the
frame moldings and in the
TL-148 ZM-2682 channels, causes rust-through,
which then allows water to leak
directly into the interior compartment. Zips package includes the upper
header, upper corners (LH and RH) and frame side posts.
M-3739 68-82 Windshield frame package........................... 559.95 set
Floor Pans
M-3437 75-77 Floor pan (LH or RH).................................... (4)
269.95 each
M-3897 78-82 Floor pan (LH or RH).................................... (4)
269.95 each
Body Rivet Setting Tool Note: M-3897 fits all 78-82 Corvettes except 81-82 LH with power seat.
Designed for Shark Corvettes, this handy tool (shown above) greatly
simplifies the job of installing body rivets. Includes bucking bar with
dual cut-outs one designed for corner rivets and a double-ended
setter featuring one end for standard rivets and the other for rivets that
use a reinforcing #10 washer.
TL-148 68-82 Body rivet setting tool ................................. 34.95
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST BODY & FIBERGLASS 89
68-82_26_088-105_Body&Fiberglass_priced 7/20/10 11:54 AM Page 90
Hood
PFG-472 68-69 Hood, 327 & 350 (pm) .................................. 1,059.00 truck
PFG-473 70-72 Hood, 350 (pm) ............................................. 1,059.00 truck
HFG-071 68-72 Hood, 327 & 350 (hl).................................... 669.95 truck
HFG-073 F-542
F-558 68-72 Hood, LT-1, 427 & 454 (pm) (ND) ................ 1,395.00 truck
HFG-072 68-72 Hood, LT-1, 427 & 454 (hl) ........................... 669.95 truck
PFG-471 68-69 Hood, L88 (pm) (ND) .................................... 1,395.00 truck
HFG-061 68-69 Hood, L88 w/o air chamber (hl) .................. 669.95 truck
F-618 68-69 L88 design fresh air chamber (hl) ................ 139.95
HFG-076 73-75 Hood (hl)....................................................... 697.95 truck
HFG-086 76 Hood (smc) .................................................... 699.95 truck
HFG-096 77-79 Hood (smc) .................................................... 699.95 truck
Hi-Rise Hood
Complete 1-Piece Front End
F-583 68-72 Hood, L88 design, long version ................... 759.95 truck
Complete 1-Piece Front End F-618 68-72 L88 design fresh air chamber (hl) ................ 139.95
Hand laid, 1-piece front ends reduce restoration time and ensure F-584 73-76 Hood, L88 design ......................................... 759.95 truck
seamless body lines. High-quality construction results in a ripple free F-585 77-82 Hood, L88 design ......................................... 759.95 truck
finish. Includes jig-aligned headlamp support bar and riveted F-619 73-82 L88 design fresh air chamber (hl) ................ 139.95
bumper/nose bar as original. Does not include lower valance panel. Note: L88-design hoods provide approximately 2 1/4 additional clearance.
Ships truck freight collect ($20.00 crate fee). No Discount. F-582 68-76 Hood, 80-style hi-rise design ....................... 759.95 truck
HFG-063 68-69 1-piece stock front end, door to door ......... 1,389.95 F-581 77-82 Hood, 80-style hi-rise design ....................... 759.95 truck
HFG-073 70-72 1-piece stock front end, door to door ......... 1,389.95
HFG-081 73-74 1-piece stock front end, door to door ......... 1,389.95 Zip recommends fitting hood to car before priming or painting. Note it may
HFG-091 75-79 1-piece stock front end, door to door ......... 1,389.95 be necessary to adjust hood surround to ensure proper alignment.
HFG-102 80-82 1-piece stock front end, door to door ......... 1,389.95
Complete your Corvettes front end installation with fresh inner skirts. Skirts are Front Lower Valance Panel
low-pressure molded (lpm) resulting in a smooth surface on both sides. A perfect GR-331 68-72 Valance panel (pm) (F).................................. (1)
172.50
alternative to costly press molded inner skirts. F-586 68-72 Valance panel (hl) (F) ................................... (1)
107.50
F-574 68-72 Inner skirt (LH or RH) (lpm).......................... (1)
249.00 each F-545 68-72 Valance panel w/bonding strips (hl)............ (1)
155.00
F-572 73-79 Inner skirt (LH or RH) (lpm).......................... (1)
249.00 each PFG-351 68-72 Valance panel bonding strip (LH or RH) (F) 39.50 each
F-573 80-82 Inner skirt (LH or RH) (lpm).......................... (1)
249.00 each WS-4475 68-72 Valance panel rear seal................................. 15.50
GR-336 68-72 Valance panel rear seal retainer (pm) .......... 82.50
As a cost savings option, Zip offers 1-piece front ends for driver cars. Be aware ZSF-475 68-72 Valance panel rear seal staples (25) ............ 4.50 set
there is a drawback to this approach: the resale value of your Corvette is likely GR-327 73-79 Valance panel (smc) ...................................... (1)
69.50
to be lower than had you installed correct press molded or SMC panels. While cost BL-515 73-79 Valance panel mount bolt kit....................... 8.00 kit
and labor for the right pieces will be more expensive than going with a 1-piece, M-3736 73-79 Valance panel reinforcement (LH or RH) (G) 22.00 each
it will still be less than the probable loss suffered at the day of sale. For the highest M-3737 73-79 Valance panel reinforcement rivets (6) ........ 2.00 set
quality product with the greatest resale potential, Zip recommends installing GR-332 80-82 Valance panel, fiberglass (hl) ....................... (1)
109.50
press molded panels or a pre-assembled press molded front end.
HAND LAID PANELS Replacement fiberglass panels are built by layering fiberglass mat and resin into a single mold. Construction of each
piece begins with the spraying of gelcoat into a female mold. Once cured, alternating layers of fiberglass matting and resin are hand rolled to
eliminate air pockets and ensure an overall uniform thickness. Once popped from the mold, panels are hand trimmed and ground to final
shape. Hand laid (hl) panels have a smooth exterior and a rough fiberglass/resin underside.
SMC PANELS 73-82 Corvettes were assembled of panels made from a sheet molded composite (SMC). SMC panels are formed by
a high-pressure mold compressing a mix of fiberglass, resin, catalyst and release agent. SMC pieces are smoother than press molded fiberglass
panels and have a marbled appearance typically gray in color. Note SMC panels require special adhesives for bonding.
Inner Skirts
68-72 Front End PFG-301 68 Inner fender skirt, LH (pm) ........................... (1)
345.00
PFG-302 69-72 Inner fender skirt, LH (pm) ........................... (1)
345.00
F PFG-303 68-72 Inner fender skirt, RH (pm)........................... (1)
345.00
F-574 68-72 Inner fender skirt (LH or RH) (lpm).............. (1)
249.00 each
PFG-304 73-79 Inner fender skirt (LH or RH)
hood surround
(pm) (gray) (G)(H) ...................................... (1)
345.00 each
F-572 73-79 Inner fender skirt (LH or RH) (lpm) (G)(H).. (1)
249.00 each
PFG-306 80-82 Inner fender skirt (LH or RH) (smc).............. (1)
389.95 each
F-573 80-82 Inner fender skirt (LH or RH) (lpm).............. (1)
249.00 each
bonding strip
PFG-388 70-72 Inner fender skirt extension (LH or RH) (pm) 43.50 each
HFG-544 68-72 Inner fender skirt air condition line duct
reinforcement on RH inner skirt (hl) ................................. 45.00
bonding strip
plenum panel O
Door & Rocker Area cowl upper
bonding strip
HFG-542 68 Door skin (LH or RH) (hl) ............................. 355.00 each
HFG-543 69-82 Door skin (LH or RH) (hl) ............................. 355.00 each ZM-317
PFG-367 68-82 Door hinge pillar cover (LH or RH) (pm) (M) 71.50 each
PFG-358 68-75 Door lock pillar cover, Conv.
(LH or RH) (pm) (M) .................................. 169.50 each
F-595 68-75 Door lock pillar cover, Conv. cowl upper
(LH or RH) (hl) (M) .................................... 99.50 each
plenum panel
PFG-357 68-77 Door lock pillar cover, Coupe,
77 1st design (LH or RH) (pm) .................. 132.00 each
F-594 68-77 Door lock pillar cover, Coupe,
77 1st design (LH or RH) (hl) .................... 99.50 each
PFG-385 77-82 Door lock pillar cover, Coupe,
77 2nd design (LH or RH) (pm) ................. 129.50 each tunnel
PFG-371 68-82 Door sill filler (LH or RH) (pm) (M) .............. 47.50 each insulation
PFG-360 68-82 Rocker panel (LH or RH) (pm) (M)............... 187.50 each
92 BODY & FIBERGLASS Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_088-105_Body&Fiberglass_priced 6/14/10 4:08 PM Page 93
R nut plate
rear deck panel
BL-488
BL-489
PFG-234 68-69
(LH or RH) (pm) .........................................
Quarter panel rear splash shield
102.50 each
Exhaust Panel Conversion
(LH or RH) (pm) ......................................... 71.50 each Factory under car exhaust for 68-73 exits between the rear exhaust
PFG-235 70-73 Quarter panel rear splash shield panel and quarter panel. If youre converting your Corvette to side
(LH or RH) (pm) ......................................... 71.50 each mount exhaust, Zip has a custom exhaust panel with a special ear to fill
PFG-236 74-82 Quarter panel rear splash shield the no-longer-needed hole in the fender panel. Hand laid.
(LH or RH) (hl) ........................................... 71.50 each F-601 68-69 Side exhaust conversion exhaust panel....... 169.00
F-602 70-73 Side exhaust conversion exhaust panel....... 159.00
Spray Gelcoat
Seals loose or exposed fiberglass strands in non-SMC panels plus
Spray Gelcoats unmatched sealing qualities prevent body filler from
bleeding through to ruin your perfect paint! Hardener included.
R-918 Spray Gelcoat, gallon.................................................. 99.95
R-917 Spray Gelcoat, quart................................................... 29.95 R-933
Bonding Adhesive
Unbeatable adhesion securing fiberglass to bonding strips grips
even in instances of expansion, contraction and vibration. Use Zips
R-932 SMC adhesive for bonding sheet molded composite panels. Fiberglass Mat
Hardener included. Not intended for use as a surface filler. 1.5-ounce Quality Grade mat is ideal weight
R-912 Bonding adhesive, gallon ........................................... 84.95 for repairing all non-SMC (sheet molded
R-911 Bonding adhesive, quart ............................................ 27.95 composite) fiberglass panels. Use with Zips
R-932 Bonding adhesive, formulated for SMC panels, R-915 resin for best results.
2-quart kit................................................................. 129.95 kit R-917 R-921 Fiberglass mat,
50 x 1 yard ........................ 12.95
Body Filler R-922 Fiberglass mat,
The best results are achievable only by using the best quality filler. 50 x 3 yards....................... 24.95
Virtually eliminates dreaded shrinkage, pinholing and bleed-through
when prepping fiberglass panels. Use Zips R-934 SMC filler for
sheet molded composite panels. Hardener included.
R-913 Body filler, quart ......................................................... 24.95
R-934 Body filler, formulated for SMC panels, quart........... 27.95
R-911
MEKP Hardener
Catalyst for polyester resins and gelcoats.
R-920 MEKP hardener, 11 cc ........... 5.00
Deck Lid
Alignment Wedges & Bumpers cable clip bolt brass stop
cable grommet bumper
CT-105 68-69 Deck lid alignment brass wedge.................. 35.00 each cable
WS-751 72-75 Deck lid seat bumper, mounts on leading clamp handle bumper bracket
screw
edge of deck lid for seat back................... 16.95 each
WS-752 68-75 Convertible top push-down bumper (U)..... 12.50 each side latch
CT-254 68-75 Convertible top bumper bracket (U)........... 12.50 each
side latch cable
SF-636 68-75 Convertible top bumper bracket bolts ........ 2.00 pair
catch spring
CT-254 CT-105 WS-751 WS-752
hinge
lower
Release Handle nut plate outer rod
outer U
U-168 68-75 Deck lid release handle, reconditioned (S).. Call rod clip
ZSF-399 68-75 Deck lid release handle screws (4) (U) ........ 3.50 set Deck Lid
SPR-151 68-75 Deck lid release handle spring (S) ............... 5.50 each
CT-222 68-75 Deck lid release center pivot (S).................. 9.00
CT-90 68-75 Deck lid release center pivot bolt (S) .......... 6.75 Hinge
CT-95 68-75 Deck lid release center rod, w/attaching CT-103 68-70 Deck lid hinge lower mount nut plate
clip & hardware (S) ................................... 12.50 (LH or RH) (U) ........................................... 32.00 each
CT-104 71-75 Deck lid hinge lower mount nut plate
(LH or RH) (U) ........................................... 32.00 each
CT-319 68-75 Deck lid hinge lower support repair piece,
release handle
includes sides & lower hook...................... 32.50 each
handle spring
CT-206 68-75 Deck lid hinge shim (U) ............................... 1.50 each
chrome
cover CT-47 68-75 Deck lid hinge spring (2 per car) (U) .......... 10.00 each
TL-158 68-75 Deck lid hinge spring install/remove tool ... 17.50
handle CT-318 68-75 Deck lid hinge spring lower hook................ 26.00 pair
spring
center rod gasket ZCT-69 68-75 Deck lid upper & lower hinge mount
outer rod outer rod bolts (6) ..................................................... 3.00 car
Hardtop Ferrel
HT-203 68-75 Deck lid bezel ............................................... 6.50 each
HT-383 68-75 Deck lid bezel rubber washers..................... 1.50 each
ZHT-307 68-75 Deck lid bezel plug, used to plug deck lid Side Latch & Striker
bezel when hardtop is not in use ............. 2.50 each CT-68 68-75 Deck lid catch, mounts on body (U)............ 22.00 each
CT-67 68-75 Deck lid catch screws, correct head (8)....... 8.50 set
CT-72 68-75 Deck lid catch anti-skid shims (4) ................ 22.00 set
CT-73 68-75 Deck lid catch striker plates, wear plates
Deck Lid Protector on body, stainless w/rivets........................ 12.50 pair
Clear film protector is die cut to fit contour CT-52 68-75 Deck lid side latch (2 per car) (U) ............... 48.50 each
of rear deck lid to protect your Corvettes ZCT-69 68-75 Deck lid side latch mount screws (6)........... 3.00 car
paint from damage caused by contact with CT-284 70-75 Deck lid side guide pins ............................... 34.95 pair
the soft top or auxiliary hardtop. Simple CT-87 70-75 Deck lid side guide pin bushing, on body... 3.00 each
stick-on/peel-off static cling installation. CT-258 70-75 Deck lid side rubber bumper ....................... 7.50 pair
CT-257 70-75 Deck lid side rubber bumper screws ........... 6.00 pair
X-414 68-75 Deck lid protector, soft top.......................... 26.95 CT-68 CT-52 CT-258
X-413 68-75 Deck lid protector, hardtop ......................... 26.95 CT-72 CT-73
ET-347 ET-478
M-3520
M-3521
Hood Release Cable
M-3711 68-76 Release cable w/bracket, correct wire
casing w/solid wire & handle (V) ............. 32.95
M-3713
M-3712 77-79 Release cable w/bracket, correct plastic
casing w/solid wire & handle.................... 35.95
M-315 80-82 Release cable w/bracket, correct plastic
casing w/cable wire & handle................... 35.95
M-3772 68-79 Hood release handle w/cable only .............. 21.95 M-328
M-3773 80-82 Hood release handle w/cable only .............. 21.95
ZM-2764 68-82 Release cable brass stop w/screw (V).......... 3.50 each M-2697
M-327
BL-498 68-82 Release cable to dash mount bolts (V)........ 2.00 pair
M-3098 68-76 Release cable firewall grommet (V)............. 7.50
M-3462 77-82 Release cable firewall grommet................... 7.50 Hood Hinge
M-318 68-82 Hinge (LH or RH) (W)(X) ............................. 23.50 each
ZBL-391 68-82 Hinge bolts (8) (W)(X)................................. 6.00 set
68-76 Hood Release M-3587 68-82 Hinge repair kit, includes rivet & special
M-3711 4-tanged spring washer ............................ 5.50 kit
V
bumper cap M-3702 68 Hinge/inner skirt reinforcement, LH ........... 67.50
M-3703 69-74 Hinge/inner skirt reinforcement, LH (W) .... 67.50
M-3704 75-82 Hinge/inner skirt reinforcement, LH (X) ..... 67.50
M-3705 68-73 Hinge/inner skirt reinforcement, RH ........... 67.50
M-3706 74-82 Hinge/inner skirt reinforcement, RH ........... 67.50
lock pin
adjusting M-3060 68-82 Hinge shim (W)(X) ....................................... 4.00 each
screw
lock spring
mount kit See page 89 for body rivets to install hinge/inner skirt reinforcements
retainer
seat
M-3703
brass stop cable
bolt
M-3705
firewall grommet
hood cable
releasing cam spring M-3587
M-318L M-318R
M-3060
(3)
hood cable
female
LH lock
lock bolt
retainer
Y
68-76 Female Hood Latch
a
Hood Grill & Insulation
M-3583 SPR-133
Underhood Lamp
SPR-134
E-803 77E Underhood lamp (w/alarm on fender) ....... 36.00
E-805 77L-79 Underhood lamp assembly .......................... 36.00
E-806 80-82 Underhood lamp assembly .......................... 36.00
M-3780 77-82 Underhood lamp housing only .................... 15.00
E-610 77-80 Underhood lamp ground wire ..................... 11.00
L-375 77-82 Underhood lamp bulb.................................. 2.50
E-1084 77-82 Underhood lamp mercury switch ................ 10.95
M-3582 M-282 M-3167 M-3495 M-3494 SF-695 77-79 Underhood lamp mount kit ......................... 4.50 set
BL-569 80-82 Underhood light mount kit.......................... 3.50 set
68-76 Male Hood Lock
BL-499 68-76 Male lock to firewall mount kit Hood Emblems
(12 pcs) (V)................................................ 3.50 set T-309 70-72 LT-1 hood decal, white ................................. 9.00 each
M-3494 68-69 Male lock pin (2 per car) (V) ....................... 12.50 each T-212 68-69 4-2-7 hood emblems w/speed nuts ......... 29.95 set
M-3495 70-76 Male lock pin (2 per car) (V) ....................... 12.50 each T-319 70-72 4-5-4 hood emblems w/speed nuts ......... 29.95 set
SPR-134 68-76 Male lock spring, LH releasing cam (V)....... 7.50 each SF-670 68-72 Hood emblem speed nut set (12)................ 3.00 set
SPR-133 68-76 Male lock pop-up spring (V) ........................ 6.00 each T-420 73-74 454 hood emblems ................................... 37.95 pair
M-3166 68-76 Male lock spring lower seat (V) ................... 8.50 each T-310 75-79 L82 hood emblems....................................... 49.95 pair
M-3167 68-76 Male lock spring upper retainer (V) ............ 5.00 each T-311 L48 hood emblems, reproduction ............... 17.95 pair
M-282 68-76 Bumper adjusting screws w/nuts (V) .......... 4.50 pair
WS-4515 68-76 Bumper rubber cap, correct See page 168 for individual hood numerals
reproduction (V)........................................ 4.00 pair
M-3312 68-76 Release cable firewall plug, removable
plug for manual hood release................... 3.00 pair
bumper
firewall spring
mount nut
Z
77-82 Hood Latch & Cable
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 BODY & FIBERGLASS 97
68-82_26_088-105_Body&Fiberglass_priced 6/14/10 4:09 PM Page 98
WS-713 WS-714
Interior Lock Knobs
I-417 68-77 Lock knob (b) ............................................... 12.00 each
I-899 78-82 Lock knob ..................................................... 6.00 each
I-322 68-77 Lock knob plastic backplate (b) ................... 2.00 each
ZDR-35 68-77 Lock knob clip (b)......................................... 1.00 each
WS-4512
DR-309
door
DR-594 ES-326 ES-345 ES-340 DR-380 handle
handle
Decal rod gasket
MF-298 73-75 Tire pressure decal, back of LH door ........... 3.75 swivel
MF-299 76-77 Tire pressure decal, back of LH door ........... 3.75 retainer
lock
Zip Products pawl
DR-607
Door Lock Rods
LK-335 grommet
LK-108S d opening control rod
LK-310
LK-305 LK-311
LK-316 grommet
LK-108R lock upper rod
LK-317 ZLK-323 rod clip
See page 124 for power door lock harnesses DR-313 DR-56
DR-597
E-529
ES-347 DR-425
DR-315 DR-592 DR-41
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST BODY & FIBERGLASS 99
68-82_26_088-105_Body&Fiberglass_priced 6/14/10 4:09 PM Page 100
access cover
mount
bolt DR-464 SF-552 E-528
mount bolt shim
lower hinge
DR-414 DR-644
Worn hinge pins and busted pin bushings are the usual causes for
sagging doors which in turn cause increased wear on the door lock
mechanism and striker. Zips hinge pins are cut to proper length and
include all-new bushings. Replacement hinge springs virtually guarantee
you never suffer another pinched leg! DR-514
DR-439
reveal molding
DR-410 69-82 Window anti-rattle bumper w/felt (g) ........ 10.50 each
DR-615 69-82 Window anti-rattle bumper w/felt (4) ........ 29.95 set
anti-rattle
bumpers
g
Outer Window Seal featured cars clubs www.corvettemagazine.com
i
71-74 Washer Jar
M-2319 71-74 Washer jar, includes cap, hose & filter (j) ... 21.95
WW-282 71-74 Washer jar cap (j) ......................................... 5.00
cap WW-281 71-74 Washer jar pick-up filter (nylon screen) ...... 4.00
WW-330 71-74 Washer jar pick-up filter (brass screen)....... 13.50
WW-355 71-74 Washer jar pick-up filter brass insert screen 3.00
M-313 WW-348 71-74 Washer jar pick-up hose ............................... 1.25
WW-309 71-72 Washer jar neck bracket (j) .......................... 25.00
washer M-3426 73-74 Washer jar neck bracket (j) .......................... 14.50
bag
M-3422 71-72 Washer jar bracket (j)................................... 26.50
pick-up WW-300 71-74 Washer jar bracket rivets (3) (j)................... 1.00 set
filter bag
bracket
M-314
M-2319
WW-300
68-70 Washer Jar (w/o AC)
M-3422 M-3426 WW-309
M-3145 68-69 Washer jar, black, reproduction................... 21.50
M-292 70 Washer jar, white, 68-69 replacement......... 10.95
M-3782 70 Washer jar kit, includes replacement jar,
cap, filter & pick-up hose .......................... 14.95 kit
WW-282 68-70 Washer jar cap .............................................. 5.00
WW-281 68-70 Washer jar pick-up filter (nylon screen) ...... 4.00
WW-330 68-70 Washer jar pick-up filter (brass screen)....... 13.50 75-82 Washer Jar
WW-355 68-70 Washer jar pick-up filter brass insert screen 3.00 M-2318 75-79E Washer jar, 5 square (k) ............................. 32.50
WW-348 68-70 Washer jar pick-up hose ............................... 1.25 M-2320 79L-82 Washer jar, 8 square ................................... Call
M-3480 68-69 Washer jar bracket ....................................... 12.00 M-2316 75-82 Washer jar cap (k) ........................................ 12.50
M-3422 70 Washer jar bracket ....................................... 26.50 M-2317 75-82 Washer jar neck extension (k) ..................... 13.00
WW-300 68-70 Washer jar bracket rivets (3)........................ 1.00 set M-2322 75-82 Washer pump (k).......................................... 34.50
M-2321 75-82 Washer pump nut & pick-up filter ............... Call
M-3145
M-292
75-79 Washer Jar
M-2318
k
M-2317
cap
neck
extension
WW-281 M-3480
WW-330 WW-282 M-3422 M-2321 M-2322 washer washer jar
pump
Washer Hoses 75-79E Washer Jar
WW-366 68 Washer nozzles............................................. 47.50 pair
ZWW-212 68 Washer hose set w/grommets, w/o AC....... 12.50 set
ZWW-213 68 Washer hose set w/grommets, w/AC.......... 12.50 set
ZWW-214 69-72 Washer hose set w/grommets, w/AC.......... 12.50 set
E-913
ZWW-215 69 Washer hose set w/grommets, w/o AC....... 12.50 set
ZWW-216 70 Washer hose set w/grommets, w/o AC....... 12.50 set
ZWW-217 71-72 Washer hose set w/grommets, w/o AC....... 12.50 set
ZWW-218 73-74 Washer hose set w/grommets ..................... 12.50 set
ZWW-219 75-76 Washer hose set w/grommets ..................... 12.50 set
ZWW-220 77-82 Washer hose set w/grommets ..................... 12.50 set ZWW-216
ZWW-283 68-82 Washer hose firewall grommet.................... 1.25 each
E-785 68-82 Tie strap, 5 T-shaped, black........................ 2.25 each
Washer Hose Set
E-786 68-82 Tie strap, 7 T-shaped, black........................ 2.25 each
E-913 68-82 Tie strap kit, includes (8) 7 T-shaped ties
for holding hoses & harness together ...... 10.00 set Left-hand (LH) = drivers side; right-hand (RH) = passenger side
102 BODY & FIBERGLASS Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_088-105_Body&Fiberglass_priced 6/14/10 4:09 PM Page 103
WW-350
stop bracket
w/cushion
wiper head
w/blade WW-307L
wiper arm
firewall seal
WW-200 WW-349
WW-347 WW-206
M-2321
bracket bushing
actuator adjusting nut
n
68-69E Door Activator
adjusting
nut mount
BL-417 bracket
actuator
BL-418 68-72 Wiper door hinge rivet w/bushings
(1 rivet & 2 bushings) ............................... 4.50 set WW-221
BL-417 68-72 Wiper door hinge rivet w/bushings
(16 rivets & 32 bushings).......................... 48.50 set
drive rivet
See page 131 for complete wiper system vacuum hose kits
ET-487
safety valve bracket
limit switch
limit switch ET-332
leads ET-420
plunger
p bolt q
Vacuum Safety Valve Door Limit Switch
ET-304
WW-336 WW-337
E-916
X-335 73-82 Wiper compartment cover ........................... 49.95
ES-350
24-hour fax line 804-730-7043 Order anytime! BODY & FIBERGLASS 105
68-82_26_106-119_Cooling_priced 6/29/10 5:45 PM Page 106
Radiator On the subject of Corvette replacement radiators, the term direct fit
often gets used rather loosely. By definition, one would expect it
Replacement Radiator
to drop right in and hook right up unfortunately, thats not necessarily
Cool your Corvette with a new radiator made of copper and brass
for efficient cooling. Replacement radiator fits into factory supports reality in a lot of cases. However, thats exactly the case with Zips
without any modifications to car. Direct Fit radiators!
M-2258 68-73 Radiator, 68-73 327 & 350 4-speed
w/o AC, uses expansion tank .................... (1)
389.95
RA-118 68 Radiator, 427 ................................................ (1)
389.95
RA-118 68 Radiator, 327 Automatic .............................. (1)
389.95
RA-105 69-72 Radiator, 350 Automatic .............................. (1)
399.95 Direct Fit Aluminum Radiator
RA-120 69-72 Radiator, 427 ................................................ (1)
399.95 Like the name says, our radiators are designed to bolt right in no
RA-106 69-72 Radiator, 69-72 350 w/4-speed & AC ifs, ands or buts. Every Direct Fit radiator is made in the USA and
& 70-72 LT-1 w/M21.................................. (1)
399.95 begins life as a double-row core furnace brazed for strength and
RA-121 73-76E Radiator, 27 1/2 core.................................. (1)
399.95 accuracy. Press formed end tanks are meticulously TIG welded by
RA-119 76L-79 Radiator, 2 core width ................................ (1)
319.95 real craftsmen to ensure leak-free performance and knockout looks.
RA-122 76L-79 Radiator, 2 5/8 core width ......................... (1)
399.95 Epoxy free. Have a work of art under your hood!
RA-123 80-82 Radiator, 2 core width ................................ (1)
319.95
RA-155 68-72 Direct Fit radiator, 327 & 350 4-speed,
w/o AC ....................................................... (1)
529.95
RA-175 68 Direct Fit radiator, 327 w/Automatic or AC (1)
499.95
RA-157 68 Direct Fit radiator, 427 4-speed ................... (1)
519.95
RA-175 68 Direct Fit radiator, 427 Automatic ............... (1)
499.95
RA-193 68-69 Direct Fit radiator, 427 L88 .......................... (1)
529.95
RA-161 69-72 Direct Fit radiator, 350 4-speed w/AC
& 70-72 LT-1 w/M21.................................. (1)
499.95
RA-162 69-72 Direct Fit radiator, 350 Automatic ............... (1)
499.95
RA-160 69-72 Direct Fit radiator, 427 & 454 Automatic .... (1)
499.95
RA-159 69-72 Direct Fit radiator, 427 & 454 4-speed ........ (1)
499.95
M-2258 RA-121 RA-164 73-76 Direct Fit radiator, Automatic, 27 1/2 core (1)
499.95
RA-163 73-76 Direct Fit radiator, 4-speed, 27 1/2 core ... (1)
499.95
Exact Reproduction Aluminum Radiator RA-166 77-82 Direct Fit radiator, Automatic, 2 5/8 core.. (1)
499.95
Features OE-design core, tank and top and bottom plates. Includes RA-165 77-81 Direct Fit radiator, 4-speed, 2 5/8 core ..... (1)
499.95
correct stamped GM part number and date code for your car. Specify
year, serial number and date code. Prepaid only. No Discount.
RA-124 68-73 Aluminum reproduction radiator, 68-73
327 & 350 4-speed w/o AC ....................... (1)
879.95
RA-125 68-69 Aluminum reproduction radiator, L88......... (1)
879.95
RA-157 RA-203
Radiator Cap & Drain Correct Part Number Upper Radiator Hose
ZM-1119 68-74 Overflow hose, 427 & 454 (ribbed)............. 6.00 M-2662 68 Upper, 327 Automatic or AC #3917670....... 32.00
M-2497 68-74 Overflow hose straps, 427 & 454 ................ 2.50 pair M-2423 68-72 Upper, 327/350 3-4-speed w/o AC or
M-2210 68-72 Radiator cap (RC15/15#) ............................. 29.95 w/aluminum radiator #3935466 ............... 26.00
M-320 68-72 Radiator cap, replacement ........................... 16.00 M-3031 69-72 Upper, 350 w/AC or Automatic or
M-322 73-82 Radiator cap, replacement ........................... 11.50 w/copper radiator #3946852 .................... 34.50
M-184 68-72 Radiator drain cock, aluminum .................... 16.50 M-2425 70-72 Upper, 70 ZR1 & 71-72 HD #3946011 ......... 32.50
M-3055 68-82 Radiator drain cock, brass ............................ 4.50 M-3031 73-76E Upper, 350 #3946852 ................................... 34.50
M-3030 76L-79E Upper, 350 #371443 ..................................... 36.50
See page 113 for expansion tank caps M-2436 79L-82 Upper, #14016075 ........................................ 32.50
Note: 79-Early radiators include 1 1/2 inlet; 79-Late have 1 1/4 inlet.
M-3029 68 Upper, 427 #3947866 ................................... 28.50
M-3028 69 Upper, 427 3x2 & 390 w/o PS #3947867 .... 38.50
M-3027 69-72 Upper, 427 w/PS & 70-72 454 #3967433 .... 32.50
M-2431 73-74 Upper, 454 #331876 ..................................... 31.50
ZM-1119 68-74 Overflow hose, 427 & 454 ........................... 6.00
M-184 M-3055
M-2210 M-320 M-322 M-2497 68-74 Overflow hose straps, 427 & 454 ................ 2.50 pair
Radiator Hoses
Correct Part Number Lower Radiator Hose
M-3278 68 Lower, 327 w/Automatic or AC #3917671 .. 32.00
M-2286 68 Lower, 327 4-speed w/o AC #3917669........ 31.50
M-2286 69-72 Lower, 350 w/aluminum radiator or
copper replacement, 4-speed w/o AC
#3917669 ................................................... 31.50 M-3031
M-2428 69-72 Lower, 350 Automatic or AC, large copper
radiator #3946854 ..................................... 29.50
M-2427 69-71 Lower, 427/454 w/HD radiator #3946012 .. 34.50
M-2429 73-76 Lower, 350, 76-Early #355347 ...................... 40.50
M-2430 76-82 Lower, 350, 76-Late #379933 ....................... 51.50
M-2285 68 Lower, 427 #3921908 ................................... 29.50
M-2434 69 Lower, 427 #3947868 ................................... 36.50 M-3027
M-2434 70-74 Lower, 70-73 454 w/o AC & 74 w/AC
#3947868 ................................................... 36.50
M-2935 70-73 Lower, front to radiator, 454 w/AC
#3969928 ................................................... 12.00
M-2936 70-73 Lower, rear to water pump, 454 w/AC
#3969929 ................................................... 20.00
M-2937 70-73 Lower hose coupler, 454 w/AC .................... 27.00
Radiator Relief
Get as much as a 30 drop in operating
temperature while cutting your warm-up
time in half. Perfect for small-blocks,
big-blocks, daily drivers and full-on racers.
M-2286 No mixing, simply pour a bottle in and
youre done!
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 COOLING 107
68-82_26_106-119_Cooling_priced 6/14/10 6:41 PM Page 108
radiator
bracket
rod
hardware
frame bolt
M-2408B
M-2408A side reinforcement
Radiator Support lower cushion B
hardware
Reinforcement Rod
Radiator Support Mount
ZBL-369 68-82 Radiator support mount kit, includes
6 bolts & 12 shims (A)............................... 9.00 set Radiator Brackets (Copper-Style Radiator)
M-2500 68-82 Radiator support to frame bolts, includes
WB headmark bolts & washers (A) ....... 5.50 set M-3057 68 Radiator upper bracket, 427 (LH or RH) ..... 16.50 each
M-3770 73-79 Radiator support to frame bracket .............. 14.00 each M-2690L 69-76E Radiator upper bracket, LH, All (C) ............. 16.50
M-3648 68-82 Radiator support to frame shim, 1/16 (A) .. 1.25 each M-2690R 69-76E Radiator upper bracket, RH, 27 core (C) ... 16.50
M-309 68-72 Front reinforcement rod to radiator M-3178 69-72 Radiator upper bracket, RH, 26 core (C) ... 16.50
support rod, w/hardware (B) ................... 19.00 M-2747 76L-78 Radiator upper bracket (LH or RH).............. 25.00 each
BL-512 68-72 Front reinforcement rod mount hardware, M-3745 79-82 Radiator upper bracket (LH or RH).............. 25.00 each
mounts rod to header and support (B).... 2.50 each M-3058 68 Radiator upper bracket hardware, 427 ....... 8.50 set
BU-323 73-79 Radiator support to header rod................... 14.00 M-3771 69-72 Radiator upper bracket hardware................ 8.50 set
BL-519 73-79 Radiator support to header rod hardware .. 2.50 set BL-592 73-76E Radiator upper bracket hardware (C) ......... 5.50 set
BL-587 76L-82 Radiator upper bracket hardware (C) ......... 7.50 set
BL-595 68-76 Radiator upper bracket star washers (3) ..... 3.50 set
M-3703 WS-498 68-76 Radiator upper & lower cushion,
U shaped (C) .......................................... 5.50 each
M-3705
WS-4586 68-76 Radiator upper & lower cushion set ............ 15.95 set
M-3742 76-80 Radiator upper & lower cushion set,
2 core width............................................. 17.50 set
M-3743 77-82 Radiator upper & lower cushion set,
2 5/8 core width ...................................... 17.50 set
BU-323
Copper Radiator Mount
ZBL-369 M-2500
C
bracket hardware
D
push-in fastener
Radiator Support to Hood Air Dam
Mounts to top of core support; seals between hood and support to
help prevent overheating. Seals are die cut from correct materials.
air dam
68 attaches with staples; 69-82 include self-adhesive as required or
attach with push-in fasteners. Number following part description
support seals
(# pif) is quantity of push-in fasteners needed.
ZS-400 68 Air dam, 327 ................................................. 21.50
ZS-401 68 Air dam, 427 ................................................. 21.50
ZS-402 69E Air dam, 350 ................................................. 6.00
ZS-403 69L-70 Air dam, 350 (3 pcs)..................................... 10.00 set
ZS-403 70-71E Air dam, LT-1 (3 pcs) .................................... 10.00 set
ZS-404 71L-72 Air dam, LT-1 (2 pif) ...................................... 21.50
support
seals ZS-405 71 Air dam, 350 (2 pif)....................................... 21.50
ZS-406 72 Air dam, 350 (2 pif) (D) ................................ 21.50
ZS-407 69 Air dam, L88, 70 ZR1 & 71 LS6, ZR1 & ZR2.. 25.00
lower baffle ZS-408 69E Air dam, 427 ................................................. 9.00
front seal lower baffle ZS-409 69L Air dam, 427 (2 pif)....................................... 10.00
rear seal
ZS-410 70 Air dam, 454 ................................................. 10.00
ZS-411 71 Air dam, 454 (2 pif)....................................... 21.50
ZS-412 72 Air dam, 454 (2 pif)....................................... 21.50
ZS-413 73 Air dam, 350 & 454 (2 pif)............................ 21.50
76L-82 Radiator Support Seals ZS-414 74-75 Air dam, 350 & 454 (2 pif)............................ 21.50
ZS-415 76-78 Air dam, 76-77 & 78 L48 (3 pcs) (2 pif) (E) 15.00 set
E air dam
support seals ZS-416 78-79 Air dam, 78 L82 & 79 All (3 pcs) (2 pif) ....... 15.00 set
ZS-417 80-81 Air dam (5 pcs)............................................. 19.00 set
ZS-418 82 Air dam (4 pcs)............................................. 17.00 set
SF-487 68-82 Push-in fastener (D)(E) ................................ 2.75 each
push-in
fastener
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST COOLING 109
68-82_26_106-119_Cooling_priced 6/14/10 6:41 PM Page 110
M-3741
bolt kit
Radiator Shroud & Extension support
shroud shroud H
F lower seal
Shroud Lower Brackets
MF-246 MF-247
MF-245
Radiator Support & Shroud Seals Set 68 327 Radiator Support & Shroud Seals
Complete sets feature all seals needed for sealing the radiator, radiator J
supports and shroud. Sets include radiator support seals, shroud seals
and a radiator support-to-hood air dam. Die cut from correct materials
and backed with pressure sensitive adhesive as required. Push-in
fasteners are available separately number following part description
(# pif) is quantity of push-in fasteners needed.
ZS-300 68 327 w/steel shroud (J).................................. 75.00 set
ZS-301 68 327 w/plastic shroud.................................... 59.00 set
ZS-302 68 427 w/steel shroud....................................... 75.00 set
ZS-303 68 427 w/plastic shroud.................................... 49.00 set
ZS-304 69E 350 w/steel shroud....................................... 49.00 set
ZS-305 69E 350 w/plastic shroud.................................... 47.00 set
ZS-307 69L 350 w/copper radiator & plastic
shroud (7 pif) ............................................. 52.00 set
ZS-308 69L 350 w/aluminum radiator & steel 74-75 Radiator Support & Shroud Seals
shroud (6 pif) ............................................. 55.00 set
ZS-309 69L 350 w/aluminum radiator & plastic K
shroud (6 pif) ............................................. 52.00 set
ZS-310 69E 427 (6 pif)...................................................... 40.00 set
ZS-311 69L 427 (6 pif)...................................................... 42.00 set
ZS-312 70 350 w/aluminum radiator & steel
shroud (6 pif) ............................................. 55.00 set
ZS-314 70 350 w/aluminum radiator & plastic
shroud (6 pif) ............................................. 52.00 set
ZS-313 70 350 w/copper radiator & plastic
shroud (6 pif) ............................................. 52.00 set
ZS-315 70 454 (7 pif)...................................................... 42.00 set
ZS-316 71 350 w/aluminum radiator & steel
shroud (8 pif) ............................................. 55.00 set
ZS-317 71 350 w/aluminum radiator & plastic
shroud (8 pif) ............................................. 52.00 set
ZS-318 71 350 w/copper radiator & plastic
shroud (9 pif) ............................................. 52.00 set
ZS-319 71 454 (9 pif)...................................................... 52.00 set
ZS-320 72 350 w/aluminum radiator & steel
shroud (8 pif) ............................................. 55.00 set
ZS-322 72 350 w/aluminum radiator & plastic
shroud (8 pif) ............................................. 52.00 set
ZS-321 72 350 w/copper radiator & plastic
shroud (9 pif) ............................................. 52.00 set
ZS-323 72 454 (9 pif)...................................................... 52.00 set
ZS-337 70 350 LT-1 (7 pif) .............................................. 52.00 set
ZS-338 71E 350 LT-1 (7 pif) .............................................. 52.00 set
ZS-339 71L-72 350 LT-1 (9 pif) .............................................. 45.00 set
ZS-324 73 350 & 454 (9 pif)........................................... 52.00 set 78 Radiator Support & Shroud Seals
ZS-325 74-75 w/o AC (9 pif) (K) ......................................... 52.00 set
ZS-326 74-75 w/AC (9 pif) (K) ............................................ 52.00 set L
ZS-327 76E w/o AC (9 pif) ............................................... 45.00 set
ZS-328 76E w/AC (9 pif)................................................... 45.00 set
ZS-329 76L-78 L48 w/o AC (9 pif) ........................................ 29.00 set
ZS-330 76L-77 L82 or AC (9 pif) ........................................... 29.00 set
ZS-331 78 L82 or AC (9 pif) (L)...................................... 29.00 set
ZS-332 79 L48 w/o AC ................................................... 29.00 set
ZS-333 79 L82 or AC ...................................................... 29.00 set
ZS-334 80-81 80 L48 w/o AC or 81 w/o HD radiator ........ 29.00 set
ZS-335 80-81 80 L82 or AC or 81 w/HD radiator .............. 29.00 set
ZS-336 82 All .................................................................. 32.00 set
SF-487 68-82 Push-in fastener (K)(L) ................................. 2.75 each
Heater Hoses
Air Condition Heater Hoses
Heater Hose Kit
M-2521 68-79 Heater hose kit, 68-79 w/o AC, ribbed M hose retainer
hoses, 3/4 hose w/red GM logo heater hose kit
& 5/8 hose w/white GM logo.............. 42.95 kit
M-3540 68-79 Heater hose kit, 68-79 w/o AC, ribbed
hoses w/o logo, 3/4 & 5/8 .................... 23.95 kit
M-2309 68-79 Heater hose kit, 68-79 w/o AC, w/o ribs or
logo, 3/4 & 5/8 hose ............................. 15.95 kit
M-2633 68-82 Heater hose kit, w/AC, non-ribbed hose
w/molded ends, 5/8 hose w/white
GM logo and 3/4 hose w/o logo (M) 49.95 kit
M-3235 68-82 Heater hose kit, w/AC, non-ribbed hose intake fitting
w/molded ends, w/o GM logo (M) .......... 26.95 kit compressor
hose bracket water pump fitting
M-2521
112 COOLING Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_106-119_Cooling_priced 7/10/10 11:21 AM Page 113
M-320
73-77E Recovery Tank
to radiator hose clamp
O
68-72 Expansion Tank cap
strap bolt
to radiator hose overflow
N hose
cap
expansion tank
clamp recovery
mount kit tank
strap decal
bracket
pick-up hose
rivet
overflow
hose
M-2457 M-2456
recovery
tank
Big-Block AC Expansion Tank clamp
Long-style reproduction tank for 427 and 454 with air condition. Brass
and copper construction as original. Available raw or in 2-part black to
epoxy coating with date code tag. Specify year of car and VIN number. radiator
hose
Note cap not included as pictured, must order separately.
AH-410
heater
hose bracket
Q
327 & 350 Compressor Brackets
AH-375 AH-324
AH-223
Compressor Brackets
Fits 327 and 350. Includes front
adjusting brace, front lower bracket,
lower mount bracket, rear bracket
Zip Products and shim, and hardware kit.
www.corvettepartsblog.com AH-424
rear brace S
spacer
adjusting bracket
lower bracket
front brace
Compressor Decal
MF-333 68 Compressor Frigidaire decal ........................ 5.75
MF-330 69 Compressor Frigidaire decal, 350 ................ 5.75
MF-336 MF-334
MF-330A MF-330
See inside back cover for special freight charge (1)
AH-435 AH-437
condenser inlet sleeve
bushing
drier
outlet 78-79 Condenser Liquid Line
tube
V
bracket condenser
bracket VIR inlet w/service block
mount kit
receiver drier
liquid line
AH-464
AH-409 68-72 POA valve update kit, R-12 .......................... 112.50 kit
AH-409A 68-72 POA valve update kit, R-134a....................... 112.50 kit
AH-383
(2)
Evaporator
BL-593 68-82 Evaporator case screws, hold halves
together ..................................................... 3.50 set AC/Heater Box Rebuild Kit
AH-431 68 Evaporator core ............................................ 299.95 Eliminates air drafts and improves
AH-355 69-72 Evaporator core (W)..................................... 299.95 efficiency of heat and AC systems.
AH-354 73-77 Evaporator core, w/VIR system (W) ............ 299.95 Includes all seals necessary to
AH-353 77-79 Evaporator core, w/CCOT system................ 299.95 completely disassemble and reseal
AH-352 80-82 Evaporator core ............................................ 289.95 heater and AC ductwork. Precision ZM-2536
AH-469 68-72 Evaporator core drain tube.......................... 9.50 die cut from correct materials.
ZAH-379 68-82 Evaporator core seal (W) ............................. 9.00 ZM-2539 68-79 Heater box seal kit, w/o AC ......................... 24.00 kit
ZAH-479 68-82 Evaporator core tube seals (W) ................... 5.00 pair ZM-2535 68-77 Heater box seal kit, w/AC ............................ 45.00 kit
ZM-2536 78-82 Heater box seal kit ....................................... 40.00 kit
Evaporator Core & Housing TL-154 68-82 Small rivet tool ............................................. 26.95
TL-165 68-82 Aero-Rivet tool.............................................. 79.95
W
tube seal
Air Condition Ducts
MF-320
AH-420 68-73 LH side duct w/lower diverter, new
evaporator core
plastic replacement ................................... 152.95
AH-491 74-77 LH side duct, new plastic replacement........ 99.95
AH-468 78-82 LH side duct (Y)............................................ 99.95
ZI-925 68-77 Side duct foam seals to vent ball housing... 3.50 pair
adapter outlet
seals
AH-333
diverter center deflector seal
AC deflector Y
78-82 Center & Side Duct
WW-239 SF-517
Heater Core
M-325
M-324
68-79
68-77
Heater core, w/o AC.....................................
Heater core, w/AC........................................
62.95
62.95
Vent Balls & Seals
M-2315 78-82 Heater core, w/AC........................................ 62.95 Zips reproduction chrome/black
dash vent balls include a full car
Heater & AC Box set of felt seals.
ZM-2574 68-82 Heater or AC box mount nut kit.................. 3.00 kit
SF-517 68-82 Heater box to firewall studs, w/rivets
& nuts, w/o AC (8 pcs).............................. 13.50 set
D-743 68-77 Vent balls w/seals ......................................... 29.95 car
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 COOLING 117
68-82_26_106-119_Cooling_priced 6/14/10 6:42 PM Page 118
ES-310 68 Blower switch ............................................... 28.00 Fully assembled and ready to install.
ES-308 69-76 Blower switch (Z) ......................................... 22.00 Includes new bezel, face plate, lens,
D-894 68 Control panel, heater & AC, new ................ 199.95 indicators, actuator pulleys, strings
D-895 69-71 Control panel, heater & AC, new ................ 199.95 and thumb wheels.
D-896 72-75 Control panel, heater & AC, new ................ 199.95
D-897 76 Control panel, heater & AC, new ................ 199.95
Note: Control panel is complete unit with new compressor and low blower switch.
Does not include AH-421 vacuum port, order separately.
D-622 68 Control panel face kit, w/o AC .................... 82.95 kit
SF-717 68-76 Control panel to console screws (2)............ 1.25 pair D-623 68 Control panel face kit, w/AC ....................... 82.95 kit
D-709 68-76 AC control panel switch, compressor D-624 69-71 Control panel face kit, w/o AC .................... 82.95 kit
cut-off on side of control panel (Z) .......... 10.00 D-625 69-71 Control panel face kit, w/AC ....................... 82.95 kit
AH-425 68-76 AC control panel switch, low blower D-626 72-75 Control panel face kit, w/o AC .................... 82.95 kit
switch on side of control panel (Z) .......... 13.00 D-627 72-75 Control panel face kit, w/AC ....................... 82.95 kit
AH-421 69-76 AC control panel vacuum port, mounts D-628 76 Control panel face kit, w/o AC .................... 82.95 kit
on LH side of control panel, 9-port (Z) .... 18.50
D-508 68 AC control panel lens ................................... 17.95
D-510 69-71 AC control panel lens (Z) ............................. 17.95
D-512 72-75 AC control panel lens (Z) ............................. 17.95 77-82 Heat & AC Control Panel
D-374 77-79 Control panel, heater & AC ......................... 139.95
D-846 80-82 Control panel, heater & AC ......................... 139.95
ES-357 77-82 Blower switch, w/AC .................................... 15.50
D-656 77-82 Control panel selector lever......................... 11.50
D-896 ES-308 ES-310
D-655 77-82 Control panel temperature lever ................. 11.50
D-832 77-79 Control panel face plate............................... 17.50
D-756 80-82 Control panel face plate............................... 17.50
D-372 77-82 Control panel clear lens ............................... 12.50
AH-305 77-82 Control panel vacuum switch ...................... 15.50
Note: 80-82 control panel faces include fan and defrost symbols.
AH-421
D-374 D-756
Z control
panel lens
blower switch
vacuum port
compressor
switch
D-656 D-655
D-900
Vacuum Actuator
AH-477 68 Air inlet plenum valve actuator ................... 46.95
AH-476 69-81 Air inlet plenum valve actuator (d)(e)......... 46.95 vacuum hose
AH-477 68-82 Air inlet RH kick panel valve plenum
actuator (b)(e)........................................... 46.95 valve
defroster actuator
AH-478 69-76 Defroster valve actuator (c)(e) .................... 46.95 actuator
vacuum hoses
b c Astro-Ventilation
defroster
valve I-1392 68-76 Astro-ventilation ball duct wing nut............ 1.50 each
actuator
ZET-331 68 Astro-ventilation door seal kit ..................... 13.50 kit
ZET-328 69-76 Astro-ventilation door seal kit, w/o AC (f) .. 19.50 kit
ZET-329 69-76 Astro-ventilation door seal kit, w/AC .......... 12.00 kit
Note: Astro-ventilation door seal kits seal vent doors on rear deck of car.
ZET-377 68-76 Rear deck vent seal fasteners (12) (f).......... 4.50 car
astro-ventilation seals
fastener
f
Astro-Ventilation Seal Kit
air inlet
plenum actuator
Fresh Air Vent Cables
D-540 68-76 Fresh air vent cable assembly, w/o AC (g) .. 20.00 each
SF-519 68-76 Fresh air vent cable push nuts (5) (g) ......... 1.50 set
d I-712A 68 Fresh air vent knobs, w/o AC, 1st design.... 27.95 pair
Air Inlet Plenum Valve Actuator I-712 68 Fresh air vent knobs, w/o AC, 2nd design .. 27.95 pair
I-1788 69-70 Fresh air vent knob, w/o AC smooth (g) 14.95 each
I-840 71-76 Fresh air vent knob, w/o AC (g) .................. 7.95 each
ZAH-302
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST COOLING 119
68-82_26_120-135_Electric_priced 6/26/10 9:51 AM Page 120
77-78 Harness Application Guide 15 = Temperature controlled spark (TCS) jumper harness
16 = Starter solenoid extension wire
77 1st design = Alarm switch located in fender 17 = Starter motor extension harness
77 2nd design = Alarm switch located in door 18 = Distributor to coil lead wire
78 1st design = Courtesy light timer located to left of steering column 19 = Hood scoop air door harness
78 2nd design = Courtesy light timer located to right of glove box 20 = Horn wire extension harness
ES-510 M-3415
ES-509
ES-508
122 ELECTRICAL Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_120-135_Electric_priced 6/26/10 9:51 AM Page 123
Forward Lamp Harness (Headlights & Park Lights) Fuel Tank Harness
E-319 68 Forward lamp harness w/fiber optics........... 289.00 E-697 75-77 Fuel tank sender harness.............................. 32.00
E-316 69 Forward lamp harness w/fiber optics........... 289.00 E-1086 78 Fuel tank sender harness.............................. 32.00
E-317 70 Forward lamp harness w/fiber optics (2) ..... 289.00
E-318 71 Forward lamp harness w/fiber optics (2) (E) 289.00 Heater Harness
Note: 68-71 forward lamp harnesses include fiber optic subassembly. E-456 75 Heater harness, w/o AC ............................... 55.00
E-359 72 Forward lamp harness (2)............................ 225.00 E-457 76 Heater harness, w/o AC ............................... 55.00
E-643 73 Forward lamp harness (2,19)....................... 225.00 E-582 77 Heater harness, w/o AC, 1st design ............ 55.00
E-360 74 Forward lamp harness (2,19,20) (F) ............ 225.00 E-583 77 Heater harness, w/o AC, 2nd design (L) ..... 55.00
E-328 75 Forward lamp harness (2,19,20).................. 225.00 E-584 78-79 Heater harness, w/o AC ............................... 55.00
E-644 76 Forward lamp harness (2,19,20).................. 225.00
E-510 77 Forward lamp harness, 1st design (2) ......... 225.00 Hood Scoop Air Door Harness
E-511 77 Forward lamp harness, 2nd design (2) ....... 225.00 E-335 73-75 Hood scoop air door harness....................... 19.00
E-896 78 Forward lamp harness (2)............................ 225.00
E-512 79 Forward lamp harness (2)............................ 225.00 Horn Extension Harness
E-645 80 Forward lamp harness, w/stereo tape......... 269.00 E-458 74-76 Horn wire extension harness, w/dual horns 16.00
E-646 80 Forward lamp harness, w/o stereo tape ..... 269.00 E-661 82 Horn wire extension harness
E-647 81 Forward lamp harness, w/stereo tape......... 269.00 (2 required per car)................................... 38.00
E-648 81 Forward lamp harness, w/o stereo tape ..... 269.00 E-898 82 Horn wire extension harness, RH side
E-649 82 Forward lamp harness, w/stereo tape......... 269.00 horn, All w/optional alarm........................ 17.00
E-650 82 Forward lamp harness, w/o stereo tape ..... 269.00
Note: 80-82 forward lamp harnesses vary depending on whether car came with or
without stereo tape player. E-458 E-678
Neutral Safety Switch E-528 68-82 Power window switch harness repair (H) ... 16.50 each
E-852 68-75 Power window motor conversion harness,
G adapts Type 3 motor to 68-75 harness..... 12.00 each
rod
rod clip
Power Window Harness
anti-theft
H switch
neutral
safety switch
ES-311
E-332
rear body harness
E-724 ES-476
ES-365 BL-514
K
Radio to Speaker Harness TCS Solenoid & Switch
ES-481 70 TCS intake solenoid, 350.............................. 85.00
Speed Warning Harness ES-478 70 TCS intake solenoid, 454.............................. 115.00
ES-480 72 TCS intake solenoid, 350.............................. 85.00
E-472 68-69 Speed warning harness ................................ 19.00 ES-479 73-74 TCS intake solenoid, 350 w/4-speed ........... 85.00
BL-514 70-74 TCS intake solenoid stud, used in place
of intake bolt when mounting solenoid ... 5.50
Zip Products
www.corvettepartsblog.com
Left-hand (LH) = drivers side; right-hand (RH) = passenger side
E-899 E-901
E-900
1st design T.I. amplifier box includes a connector mounted in box & hood open switches, set of 6 ................ 11.50 set
connecting to auxiliary harness. 2nd design has a pigtail coming out of
box and connecting to auxiliary harness.
Wiring Diagram
Underhood Lamp A must-have for Corvette
E-803 77E Underhood lamp, 1st design ....................... 36.00 owners who like to work on
E-805 77L-79 Underhood lamp assembly (M) ................... 36.00 their cars. Helpful reference
E-806 80-82 Underhood lamp assembly ......................... 36.00 when replacing a harness, or
M-3780 77-82 Underhood lamp housing only ................... 15.00 use to trace individual wires
E-610 77-80 Underhood lamp ground wire (M).............. 11.00 when diagnosing electrical
L-375 77-82 Underhood lamp bulb (M) .......................... 2.50 shorts. 17x 22 laminated.
E-1084 77-82 Underhood lamp mercury switch ................ 10.95
SF-695 77-79 Underhood lamp mount kit ......................... 4.50 set
BL-569 80-82 Underhood lamp mount kit ......................... 3.50 set
E-372 68 Wiring diagram ............................................ 12.50
E-373 69 Wiring diagram ............................................ 12.50
Underhood Lamp E-374 70 Wiring diagram ............................................ 12.50
E-503 71 Wiring diagram ............................................ 12.50
M E-375 72 Wiring diagram ............................................ 12.50
bulb underhood lamp
E-376 73 Wiring diagram ............................................ 12.50
ground wire E-377 74 Wiring diagram ............................................ 12.50
E-414 75 Wiring diagram ............................................ 12.50
E-415 76 Wiring diagram ............................................ 12.50
E-805
E-416 77 Wiring diagram ............................................ 12.50
E-417 78 Wiring diagram ............................................ 12.50
E-418 79 Wiring diagram ............................................ 12.50
E-419 80 Wiring diagram ............................................ 12.50
E-420 81 Wiring diagram ............................................ 12.50
E-421 82 Wiring diagram ............................................ 12.50
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 ELECTRICAL 127
68-82_26_120-135_Electric_priced 6/26/10 9:52 AM Page 128
E-876
ES-514
ES-374
E-486
E-913 M-3735
M-3734 E-871
Battery ButlerTM
Keep your Corvettes battery at
full charge during storage with
the Battery Butler. Floating
circuitry and regulated output
voltage means no overcharging.
Simply plug it in and never have
a dead battery again!
See page 123 for horn extension harness Note: Fiber optics harnesses are included with front and rear main wiring harnesses.
See Headlight & Forward Lamp Harness listing on page 123 and Rear Body
Harness listing on page 125.
M-3701 M-2438
I-1519 68-71 Console fiber optics front lens..................... 12.00
I-1520 68-71 Console fiber optics rear lens ...................... 10.50
I-703 68 Console fiber optics lens trim plate
(plastic) ...................................................... 26.95
I-741 69-71 Console fiber optics lens trim plate
(metal) ....................................................... 29.95
SF-720 68-71 Console fiber optics lens & trim plate
hardware.................................................... 2.50 set
E-494
L-516
L-390
10% off
Restorers Discount
M-3065
Reproduction Horns
New reproductions with Delco
Remy logo and part number.
Correct shape and attached
mount bracket as original. Set
includes (1) high and (1) low HOW IT WORKS Retail customers receive 10% savings on a
note horn. minimum purchase of $850.00 of any combination of parts and/or
accessories from this catalog or Zips Web store. Sorry, No Discount
(ND) items may be included in total value but are not eligible for
M-3678 68-71 Reproduction horns...................................... 134.95 set discount. Offer applies to a single order only and some restrictions
apply, call your Zip Products sales representative for details.
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST ELECTRICAL 129
68-82_26_120-135_Electric_priced 6/26/10 9:52 AM Page 130
Q
Battery Cables
positive
cable clamps battery cable P vent hoses
stud plate
negative
battery cable bolt
hold down
front bracket clamp
bracket reinforcement
bellhousing clamp
bracket reinforcement
Ground Straps
M-2780 68-77 Antenna ground strap.................................. 5.50
Replacement Cables M-3263 68-77 Antenna ground strap bolt & washer.......... 1.00
M-3640 68-70 Body to frame ground strap (sill plate)....... 7.75
E-323 80-82 Battery cable, positive EX-568 68-70 Exhaust hanger ground strap (2 per car) (R) 5.75 each
(70-79 replacement) (P)............................ 66.50 each
E-324 70-75 Battery cable, negative (P) .......................... 26.50 each
E-325 80-82 Battery cable, negative
(76-79 replacement) (P)............................ 24.50 each
SF-402
(2) E-579 Ground Strap Kit
Includes all required straps to
properly ground antenna,
motor mounts, exhaust, sill M-3080
plates and accelerator.
Battery Disconnect Switch
Turns off slow drains on your battery
to ensure you get maximum cranking
power at every start-up. Attaches to M-2686 68-70 Ground strap kit ........................................... 20.00 kit
negative post and disconnects circuit M-3080 71-72 Ground strap kit ........................................... 20.00 kit
with a simple twist of the knob. M-3079 73-74 Ground strap kit ........................................... 20.00 kit
M-3078 75-77 Ground strap kit ........................................... 20.00 kit
E-501 68-69 Battery disconnect, top post........................ 9.95 M-3203 78-80 Ground strap kit, w/o PWR antenna ........... 24.00 kit
E-527 69L-82 Battery disconnect, side post....................... 12.95 M-3204 78 Ground strap kit, w/PWR antenna .............. 24.00 kit
M-3205 79-80 Ground strap kit, w/PWR antenna .............. 24.00 kit
M-3074 81-82 Ground strap kit, w/PWR antenna .............. 24.00 kit
M-3073 81-82 Ground strap kit, w/o PWR antenna ........... 24.00 kit
M-2495 68-70 Ground strap hardware................................ 6.00 car
Headlights
Headlamps & Wiper Door Vacuum Hose Kit
Headlamps & Wiper Door Vacuum Hoses
override valve
Kit includes all hoses and T-connectors to restore ailing vacuum S
override valve on-off switch
systems. Features correct diameter hoses with raised ribs and colored
stripes as original (wiper actuator hoses have molded ends).
Illustrated vacuum diagram and complete instructions included.
ZHDL-214 68 Vacuum hose & T kit, 21 hoses ................ 59.95 kit wiper door
control
ZHDL-215 69 Vacuum hose & T kit, 23 hoses ................ 69.95 kit solenoid
ZHDL-216 70 Vacuum hose & T kit, 24 hoses (S)........... 79.95 kit wiper door
safety valve
ZHDL-217 71-72 Vacuum hose & T kit, 26 hoses ................ 79.95 kit
vacuum filter check valve
ZHDL-218 73-79 Vacuum hose & T kit, 15 hoses ................ 49.95 kit
ZHDL-219 80-82 Vacuum hose & T kit, 15 hoses ................ 49.95 kit relay
M-3099 M-3734
M-3735
Headlight Washer
T
nozzle
hardware ZHDL-243
Headlights continued
Headlight Housing
HDL-103 69-82 Housing (LH or RH) (U) ............................... 249.95 each bearing accordion dust boot
screw bearing
HDL-141 68-82 Housing nylon bearing w/plate (U)(W) ...... 8.00 each
HDL-255 68-82 Housing bearing to support mount screws .. 6.00 set
actuator
HDL-113 68-82 Housing pivot collar w/set screw
(4 per car) (U) ........................................... 4.75 each
M-331
HDL-257 68-82 Housing pivot collar set screw (4 per car) .. 1.00 each
HDL-337 68-69 Housing stop bracket ................................... 15.00 each
HDL-306 70-82 Housing stop bracket (LH or RH) (U) .......... 27.50 each
HDL-254 68-79 Housing stop adjusting screws & nuts mount bracket
(LH or RH) (U) ........................................... 7.50 each
HDL-137 68-74 Housing support frame (LH or RH) (U)(W).. 235.00 each clevis sleeve
HDL-139 75-82 Housing support frame (LH or RH) (U)(W).. 169.00 each pivot pin
bushing outer rod
BL-594 68-82 Housing support frame mount
bolts (10 pcs) ............................................. 7.00 set support
adjusting screw frame
HDL-336 68-82 Support inner rods (LH or RH) (U) .............. 10.50 each rear link
HDL-335 68-82 Support outer rods (LH or RH) (W)............. 10.50 each housing spring
bushing
rear pin
front link
link spring
U
HDL-224
Headlight Housing & Support HDL-246
Headlight Mechanism
HDL-135 68-82 Actuator rod to link clevis (W)..................... 12.50
HDL-145 68-82 Actuator rod to link clevis sleeve (W) ......... 3.00
HDL-127 68-82 Front link (W) ............................................... 10.50 HDL-226
HDL-125 68-82 Front link pivot bolt (W) .............................. 6.50 ZHDL-245
HDL-126 68-82 Front link pivot bolt bushing (W)................ 2.50 Protector Shields
HDL-131 68-82 Housing spring, stainless (W) ...................... 4.00
HDL-130 68-82 Link spring, stainless (W) ............................. 4.00
ES-312 68-77 Open warning switch, mounts on front
link (2 per car) (W).................................... 24.50 each
Actuator Repair Kit
HDL-134 68-82 Rear link (W)................................................. 29.50 Lazy headlights? The problem is likely an actuator leaking vacuum.
HDL-314 68-82 Rear link adjusting screw (W) ...................... 9.00 each Before purchasing a new unit, try replacing the actuator front seal first.
ZHDL-129 68-82 Rear link front pin (W)................................. 6.00 Zips repair kit includes everything needed to repair a single actuator:
HDL-340 68-82 Rear link front pin bushing (W)................... 3.00 actuator rod seal, retaining ring and outer accordion dust boot.
HDL-132 68-82 Rear link rear pin (W)................................... 6.00 HDL-291 68-82 Actuator repair kit ........................................ 22.95 kit
HDL-339 68-82 Rear link rear pin bushings, crescent (W) ... 2.75 each
HDL-144 68-82 Rear link pivot pin (W)................................. 4.00
HDL-340 68-82 Rear link pivot pin bushing (W) .................. 3.00
132 ELECTRICAL Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_120-135_Electric_priced 6/26/10 9:52 AM Page 133
ZHDL-112
M-3641
SF-579 HDL-333 68-82 Bulb replacement kit .................................... 129.95 kit
Headlight Assemblies
Zips 68-82 reproduction headlight
assemblies are absolutely complete
and ready to install. Each assembly
is built using all-new parts including
housing, frame and actuator. Paint HDL-312
to match.
HDL-312 68-74 Headlight assembly (LH or RH) ................... 649.95 each
HDL-313 75-82 Headlight assembly (LH or RH) ................... 649.95 each
blog technical articles www.corvettemagazine.com
L-386 X
L-344
retainer
nut
socket pigtail
Side Marker Lights
L-304 68 Front marker light (white) (X)..................... 34.50 each
L-305 69 Front marker light (amber) (X) ................... 34.50 each
L-308 68-69 Rear marker light (red) (Z) .......................... 31.50 each
Note: L-304, L-305 and L-308 include gasket, retainer and hardware.
ZWS-4427 68-69 Marker light body gaskets (4) (X)(Z) .......... 6.50 car gasket
park light park light
L-320 68-69 Marker light retainer (4 per car) (X)(Z) ...... 9.00 each extension
L-306 70-72 Front marker light, die cast front marker light
(LH or RH) (Y)............................................ 56.95 each
L-512 73-74E Front marker light, die cast (LH or RH)....... 56.95 each
L-307 74L-79 Front marker light, plastic (LH or RH)......... 56.95 each
L-309 70-74E Rear marker light (LH or RH)....................... 56.95 each park light extension
fiber optic lens & grommet speednut
L-310 74L-82 Rear marker light (LH or RH)....................... 58.95 each
SF-668 70-74E Marker light speednut set (8) (Y)................ 2.50 set
SF-669 74L-82 Marker light speednut set (8)...................... 2.50 set
L-510 80-82 Front marker lights....................................... 97.95 pair
L-322 80-82 Front marker front light bezel/retainer
socket
(LH or RH).................................................. Call pigtail
WS-4426 80-82 Front marker light seals ............................... 7.00 pair
L-387 68-82 Marker light socket pigtail (X)(Y)................ 13.00 each
L-382 80-82 Front marker light socket pigtail ................. 11.00 each
Zip Products
www.corvettepartsblog.com
Park Lights
backup light
gasket
L-342 L-477
75-79 Taillamps
68-73 Taillights & 69-73 Back-Up Lights a
housing bolt
L-516 68-71 Fiber optics lens, red (Z) .............................. 6.50 each
L-490 68-71 Fiber optics lens grommet ........................... 6.50 each
L-351 68-69 Taillight lens (Z) ........................................... 54.95 each
L-352 70-71E Taillight lens ................................................. 54.95 each
L-461 71L-73 Taillight lens ................................................. 54.95 each
L-348 69 Taillight lens w/back-up ............................... 54.95 each
L-349 70-71 Taillight lens w/back-up ............................... 54.95 each
L-462 72-73 Taillight lens w/back-up ............................... 54.95 each
ZL-353 68-73 Taillight lens felt wicks (4), prevents retainer mount screw
moisture build-up ...................................... 3.50 car
ZWS-667 68-73 Taillight lens gaskets .................................... 6.50 car plastic anchor taillight assembly
SF-486 68-69 Taillight lens screws (12).............................. 6.50 set
SF-484 70-73 Taillight lens screws (12).............................. 6.50 set
L-517 68 Taillight housing, inner (no fiber optic) (Z) 52.00 each
L-473 68 Taillight housing, outer (fiber optic) (Z) ..... 52.00 each
L-473
L-475
69-71
72-73
Taillight housing (fiber optic) ......................
Taillight housing ...........................................
52.00
52.00
each
each
68-79 Taillamp Sets
L-474 69-73 Taillight housing w/back-up (fiber optic).... 52.00 each Give your Corvette a showroom-fresh look 68-73 taillamp sets
ZWS-666 68-73 Taillight housing gaskets (4) (Z).................. 8.50 car include (4) new lenses with screws; 74-79 include (4) taillamp housings
with mount hardware. Back-up lamp lenses included as applicable.
See page 125 for rear body and taillamp harness L-519 68 Taillamp lens kit............................................ 189.95 kit
L-520 69 Taillamp & back-up lamp lens kit................. 189.95 kit
L-521 70-71 Taillamp & back-up lamp lens kit................. 189.95 kit
L-522 72-73 Taillamp & back-up lamp lens kit................. 189.95 kit
L-523 74 Taillamp & back-up lamp kit ........................ 174.95 kit
L-524 75-79 Taillamp & back-up lamp kit ........................ 189.95 kit
The best paint and shiniest chrome quickly lose luster when masking a worn interior. The cure?
Build your own interior package and save 10%! A same-order purchase of carpet,
door panels and seat covers triggers our Restorers Discount and once there the more dollars
spent mean the more dollars saved. From molded to cast to painted to polished, Zip stocks all
manner of correct components to return your Corvettes interior to assembly line new!
page 150
page 143
page 150
page 150
page 142
page 153
page 152
page 152
page 141
page 139
Restoration by JeffLilly.com
Add to your interior package and continue to save! Door pulls and armrests Door handle bezels Sill plates
Kick panels Reproduction floor mats Carpet underlayment Firewall insulation Seat foam
Seat backs and seat shells Seat hinges and upper seat trim Seat belts and belt boots Convertible
hardtop headliner T-top panels Rear roof panels Sunvisors Dome light Quarter panels Rear
storage compartment Jack Storage compartment decals Rear window trim and shade Dash pads
and bezels Map pocket Glove box Windshield moldings Mirror Shifter console Radio access
panels Console upper trim plate Ash tray
and lighter Park brake console Small gauges
Speedometer Tachometer Instrument cluster
bezel Radio knobs and speakers.
page 139
10% off
Restorers Discount
HOW IT WORKS Retail customers receive 10% savings on
a minimum purchase of $850.00 of any combination of parts
and/or accessories from this catalog or Zips Web store. Sorry,
No Discount (ND) items may be included in total value but are page 138
not eligible for discount. Offer applies to a single order only and
some restrictions apply, call for details.
Adhesion Promoter
The secret weapon pros use to make interior
dye really stick. Simply spray dye on top of
a fresh coat of adhesion promoter to
chemically bond dye to panel. Proper prep
ZSF-308 makes the difference! 11 oz. aerosol.
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 INTERIOR 137
68-82_26_136-157_Interior_priced 6/28/10 11:22 AM Page 138
pull insert
trim strip
armrest trim
lock knob plate
armrest trim
lock knob plate
comfortweave insert
armrest trim
lower trim
69 Deluxe Door Panel armrest trim
lock knob plate
lower carpet
WS-4556
I-647
I-857R I-740
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST INTERIOR 139
68-82_26_136-157_Interior_priced 6/28/10 11:22 AM Page 140
I-528 TL-147
80/20 Carpet Cut-Pile Carpet
Carpet Installation
WS-4582
68-77 Carpet
ZWS-418A
Floor Pan Plug Sets
Carpet Hardware
I-528 68-82 Carpet installation plugs (9 pcs).................. 15.00 set
TL-147 68-82 Carpet installation plug installation tool..... 7.50 MG-55 Spray adhesive ........................................................... 14.95 can
I-1381 68-69 Dimmer switch rubber grommet................. 10.00
ZWS-418A 68-76 Floor pan plug set (7 pcs) ............................ 7.50 car
WS-4582 77-82 Floor pan plug set (8 pcs) ............................ 18.50 car
I-1634
I-549
Firewall Insulation
Rubber-backed insulation mounts to interior compartment side of
firewall (behind dash). Pieces are precision cut and molded to fit
specific applications. I-1258 interior sound deadener is a single piece
of insulation that fits above firewall insulation.
M-3137 68 Firewall insulation ........................................ 189.95
M-3138 69 Firewall insulation ........................................ 189.95
M-3139 70-72 Firewall insulation (A) .................................. 189.95
M-3140 73-75 Firewall insulation ........................................ 189.95
M-3141 76-79 Firewall insulation ........................................ 189.95
M-3876 80-82 Firewall insulation ........................................ 189.95
M-2609C 68-82 Firewall insulation retaining plug, 68-72
(9) required & 73-82 (3) required (A) ...... 2.50 each
TL-147 68-82 Firewall insulation retaining plug
installation tool.......................................... 7.50
I-1258 68-75 Interior firewall sound deadener, fits
above firewall insulation (A) ..................... 51.50 each
Zip Products
www.corvettepartsblog.com
Seat Foam
I-121A 68-69 Seat foam (car set) ....................................... (1)
199.95 car
I-121B 70-74 Seat foam (car set) ....................................... (1)
199.95 car
I-121C 75 Seat foam (car set) ....................................... (1)
199.95 car
I-121D 76-78 Seat foam (car set) ....................................... (1)
199.95 car
I-876 78-82 Seat foam back cushion, 2 pleat ................ 79.95 each
I-853 78-82 Seat foam bottom cushion, 2 pleat ........... 79.95 each
I-2189 78-82 Seat foam set, 2 pleat................................. (1)
299.95 car
I-1422 78-82 Seat foam back cushion, 4 pleat ................ 79.95 each
I-1423 78-82 Seat foam bottom cushion, 4 pleat ........... 79.95 each
I-2190 78-82 Seat foam set, 4 pleat................................. (1)
299.95 car
79-82 Leather Covers 79-82 Mounted Covers Mounted Collector Edition I-1417 82 Seat foam back cushion, Collector .............. 104.95 each
I-1418 82 Seat foam bottom cushion, Collector.......... 104.95 each
I-2191 84 Seat foam set, Collector ............................... (1)
399.95 car
Original-Style Leather Seat Covers
Note: Collector Edition seat foam includes original-style pockets.
Reproduction covers feature correct grain, pattern and colors for
specific model years. 68-69 are 100% leather. 70-72 are all-leather
except for vinyl pull straps and vinyl insert beneath seat back release
button. 73-82 are leather panels with vinyl skirts. For 79-82 covers
specify 2 or 4 pleat (see illustration). Car set includes pair of
bottoms and pair of backs. Specify color.
I-181 68 Seat covers.................................................... 599.95 car I-121B
I-183 69 Seat covers.................................................... 699.95 car
I-185 70-71 Seat covers.................................................... 649.95 car
I-186 72 Seat covers.................................................... 649.95 car
I-187 73-74 Seat covers.................................................... 499.95 car
I-189 75 Seat covers.................................................... 499.95 car
I-191 76-78 Seat covers.................................................... 499.95 car
I-192 78-82 Seat covers, 78 Pace Car & 79-82 ................ 429.95 car
I-893 82 Seat covers, Collector Edition ...................... 589.95 car I-155
For (non-original) 100% leather 70-82 covers, add AL to appropriate Seat Cover Installation Kit
part number example: I-187AL. 70-78 car set is $699.95; 78 Pace Car
and 79-82 set is $549.95. Specify color. Seat Covers Installation
I-153 68-69 Seat cover installation kit............................. 33.95 car
I-154 70-78 Seat cover installation kit............................. 33.95 car
78-82 seats came in two styles of side to completely install new seat covers.
bolster. Using your original seat foam,
determine pleat size by first locating (A) I-2240 68-78 Seat cover installation S clip
end of horizontal pleats (A) on seat (18 required per seat) ............................... .50 each
back insert. Then locate center point of I-1667 68-82 Seat cover hog rings (25) ............................ 2.50 car
double-stitching line (B). Measure TL-143 68-82 Seat cover hog ring pliers, economy........... 7.95
distance between (A) and (B) it will be TL-142 68-82 Seat cover hog ring pliers, spring-loaded ... 19.95
either 2 or 4. Specify needed size TL-157 68-82 Seat cover clip installation tool, pulls
when ordering seat covers. clips through foam .................................... 10.00
142 INTERIOR Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_136-157_Interior_priced 6/28/10 11:23 AM Page 143
I-1516
I-1590
I-937 68-69
bottom .......................................................
Seat back release lever button.....................
12.50
10.50
each
each Seat Frame Repair I-1442
I-845 70-78 Seat back release button.............................. 10.00 each Lower frame plate repairs sagging seat
SF-659 70-78 Seat back release button screws (2) ............ 1.50 pair backs weld, or bolt-in using existing seat
I-848 70-78 Seat back release button bezel .................... 18.50 each hardware. Precut and includes threaded I-1045
SF-660 70-78 Seat back release button bezel screws ........ 3.00 set holes for seat bumpers and seat back strap.
I-1590 70-78 Seat back release strap w/lower bracket..... 52.95 each Zig-zag springs repair seat frame.
I-1595 70-78 Seat back release strap w/rivet.................... 24.00 each I-1442 70-78 Lower seat frame plate ................................ 25.00 each
I-2195 70-78 Seat back release strap to frame I-1045 68-78 Seat frame zig-zag spring (6 per seat) .... 5.50 each
plastic shims............................................... 5.00 pair
WS-751 72-75 Seat back deck lid bumper, Conv, mounts
on leading edge of deck lid ...................... 16.95 each
Armrest T Cushion
Give your elbow some relief! Vinyl or leather (leather has vinyl side
panels) both match correct seat cover pattern for model year. Does
not affect park brake operation. All original colors available.
I-253 68 Vinyl T cushion, basketweave ..................... 49.95
I-254 69-75 Vinyl T cushion, comfortweave................... 49.95
I-255 68-71 Leather T cushion ........................................ 54.95
I-921 I-256 72-78 Leather T cushion ........................................ 54.95
I-257 79-82 Leather T cushion ........................................ 54.95
68-78 Seat Hinge
I-921 68-74E Seat back hinge chrome rails
w/correct pivot bolts & washers............... 119.95 pair
I-2135 74L-78 Seat back hinge chrome rails w/correct
pivot bolts, bushings & washers ............... 119.95 pair
I-2196 68-78 Seat hinge upper mount bolts (12 pcs) ...... 8.50 car
I-130A 68-70E Seat hinge pivot bolt.................................... 3.50 each
I-1187 70E-73 Seat hinge pivot bolt.................................... 3.50 each
I-130C 74-78 Seat hinge pivot bolt.................................... 3.50 each I-254 I-255 I-253
I-918 74-78 Seat hinge pivot bolt bushings (2 per car).. 2.50 pair
I-1261 68-78 Seat hinge pivot bolt washers (4) ............... 3.50 set
I-1605
I-2201
Seat Hinge Cover
Black
Dark Blue
Red
Silver
I-955
I-1082
Rear Roof Panels
I-1191
T-Top Panel Repair
Velcro fasteners replace worn originals the likely cause behind loose
panels. Kit includes enough to do a pair of panels or a pair of T-tops.
I-1607 68-77 T-top panel Velcro fastener kit (16 pcs) ...... 21.95 set
I-1608 78-79 T-top panel Velcro fastener kit (18 pcs) ...... 27.95 set
I-1609 80-82 T-top panel Velcro fastener kit (10 pcs) ...... 16.95 set
I-1172 68-77 T-top panel Velcro lock oval ..................... 1.50 each
I-1426 I-2144 I-1192 I-1388 78-82 T-top panel Velcro lock round .................. 1.50 each
Sunvisor Hardware
I-1193 68 Sunvisor hardware kit, Conv., includes
rods, special screw/nut & washers ........... 54.95 car
quarter
I-1664 68 Sunvisor hardware kit, Coupe, includes panel
rods, special screw/nut & washers ........... 54.95 car retainer
extension
I-406 69-76 Sunvisor mount rods (4) .............................. 22.95 car
retainer extension screw
ZSF-469 69-76 Sunvisor rod to header screws (4)............... 3.00 car screw
I-413 77-82 Sunvisor mount rod, fits 77-79 LH quarter panel
w/o telescopic visor & 77-82 RH visor ...... 10.00 each
I-426 79-82 Sunvisor mount elbow, LH telescopic visor 15.00
I-878 79-82 Sunvisor mount elbow bushings, upper
& lower bushings inside elbow................. 9.00 pair
I-2242 77-82 Sunvisor elbow/rod mount kit, includes
tension spring & retainer .......................... 8.50 side
ZI-1389 77-82 Sunvisor rod access plug .............................. 2.00 each
I-1212
I-413 I-2242 I-878
(2)
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 INTERIOR 147
68-82_26_136-157_Interior_priced 6/28/10 11:23 AM Page 148
hinge support
I-1724
I-743
I-915 I-742
I-913
MF-297
MF-284
I-628
TR-56 clamp
lug wrench
TR-54 jack front bracket
spring bracket
bracket
reinforcement clamp
reinforcement
Reproduction Jack
Exact reproduction of factory Rear Window & Trim
jack installed in 68 Corvettes.
Does not include handle. 68-72 Pop-Out Rear Window
I-737 68-72 Rear window frame lower pin (2 per car)... 14.50 each
SF-711 68-72 Rear window frame lower pin screws ......... 1.50 set
TR-70 68 Reproduction jack......................................... 164.95 I-1604 68-72 Rear window frame pin plastic guide.......... 19.50 each
I-1518 69-72 Rear window latch........................................ 107.50 each
SF-715 68-72 Rear window latch bezel screws (4) ............ 2.50 set
Center Compartment I-726 68-72 Rear window lower trim, specify color........ 119.95
ZI-1277 68-72 Rear window lower trim screws (6)............. 2.50 car
ZI-692 68-76 Center liner assembly (E)(G) ....................... 19.95 ZI-1243 68-72 Rear window storage tray cushions............. 3.50 set
ZI-1404 77-79 Center liner assembly................................... 19.95 I-1108 68-71E Rear window storage tray handle bracket ... 20.00
Note: 68-76 center liner assembly includes provision for rear storage light. I-1209 68-71E Rear window storage tray handle................ 48.00
I-758 68-76 Light lens & bezel (E)(G) ............................. 11.75 BL-589 69-72 Rear window storage tray hinge bolts (8) .. 12.50 set
ES-364 68-76 Light switch w/harness & bulb (E)(G)......... 16.50 I-912 71L-72 Rear window storage tray latch................... 15.95
WS-634 68-72 Rear window weatherstrip........................... 35.00
ZWS-786 68-72 Rear window weatherstrip screws (4) ......... 2.50 set
Center Liner & Light
ZI-692
G 73-77 Rear Window
light switch
I plastic
anchor
bulb
I-737
light lens
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST INTERIOR 149
68-82_26_136-157_Interior_priced 6/28/10 11:23 AM Page 150
Dash Pad
68-77 Lower Dash Pad Reproduction Map Pocket
Exact reproduction. Includes factory mount brackets and clips for Exact reproduction with correct
instrument gauges. Available in all original factory colors and styles. stitching and grain. Available in all
For a complete, all-fresh installation Zip recommends replacing original factory colors. (Map pocket
map pocket and steering column lower cover at same time. shown installed does not include
I-1285 68 Lower LH dash pad....................................... 329.95 lower dash panel as pictured.)
I-1287 69 Lower LH dash pad....................................... 329.95
I-1289 70 Lower LH dash pad....................................... 329.95
I-1291 71-76 Lower LH dash pad, 71-73 All
& 74-76 w/o AC ......................................... 329.95 I-799 69-77 Dash pad map pocket, specify color............ 79.95
I-1293 74-76 Lower LH dash pad, w/AC ........................... 329.95 I-1269 69-77 Dash pad map pocket springs ..................... 8.50 pair
I-1294 77 Lower LH dash pad, w/AC ........................... 329.95
I-1295 77 Lower LH dash pad, w/o AC ........................ 329.95
I-1286 68 Lower RH dash pad ...................................... 329.95 68-77 Upper Dash Pad
I-1288 69 Lower RH dash pad ...................................... 329.95 Exact reproduction. Includes factory mount brackets and clips for
I-1290 70 Lower RH dash pad ...................................... 329.95 installation. 70-77 pads include speaker perforations. Available in all
I-1292 71-76 Lower RH dash pad ...................................... 329.95 original factory colors and styles.
I-1296 77 Lower RH dash pad ...................................... 329.95
I-707 68 Steering column lower cover, 2-piece ......... 84.95 I-339 68-69 Upper dash pad, specify color ..................... (1)
319.95
SC-301 68 Steering column upper cover, 2-piece......... 99.95 I-340 70-76 Upper dash pad, specify color ..................... (1)
369.95
I-718 68 Steering column to dash lower cover.......... 64.95 I-436 77 Upper dash pad, specify color ..................... (1)
369.95
I-826 68-77 Defroster outlet grill .................................... 31.00
Note: 68 Steering column covers are black paint to match interior color.
I-706 69-77 Steering column to dash lower cover,
specify color............................................... 59.95
ZSF-379 68-77 Dash pad & steering column lower cover
screws (10)................................................. 4.00 car
ZSF-464 68-82 Dash pad to door jamb screws (4) .............. 3.00 car
I-340
See page 117 for fresh air vent balls
See Body & Fiberglass and Electrical sections for knobs and switches I-2219
compartment
J
78-82 Glove Box
I-680
cover
I-679 LH I-679 RH MR-345 MR-314 MR-308 K
68-76 Inside Mirror Mount
Shifter Console
Shifter Lower Console trim plate screw data
I-422 68-69 Console lower trim assembly (L) ................. 169.95 plate
I-402 70 Console lower trim assembly (L) ................. 169.95
upper
I-403 71 Console lower trim assembly (L) ................. 169.95 trim
I-424 72-76 Console lower trim assembly (L) ................. 169.95 plate
I-1194 68-76 Console lower trim front reinforcement (L) 19.50 cover
I-1221 77 Console side trim panels, specify color ....... 79.95 pair cover clip
I-1220 78-81E Console side trim panels .............................. 32.00 pair tray cover guides
I-2212 81L-82 Console side trim panels .............................. 32.00 pair I-1039 ash tray
SF-666 77-82 Console side trim panel screws (4).............. 3.50 set
SF-665 77-82 Console side trim panel plastic anchors (4) 3.00 set reinforcement
Note: 77 console side trim panels are vinyl covered and available in all original ash tray housing
factory colors. 78-82 panels are fiberboard ready to be covered with carpet. Side
trim panel carpet strips are included in Zips front and full-car carpet sets.
L
I-1221 lower trim assembly
68-76 Lower Console & Trim Plate
152 INTERIOR Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_136-157_Interior_priced 7/1/10 12:04 PM Page 153
I-427A
Power Window
I-671 68-82 Power window switch .................................. 19.50
E-528 68-82 Power window switch plug only.................. 16.50 each
ZD-448 68-82 Instrument lens gasket kit (10 pcs) ............. 16.50 set
Clock Rebuild Service
Zip can make your original clock work good as new! Service includes
77-82 Instrument Cluster Bezel your choice of a factory electric movement or a new quartz movement.
I-761 77 Console gauge bezel .................................... 89.95 Allow 4-6 weeks for turnaround.
I-760 78-82 Console gauge bezel, w/clock ..................... 89.95 S-180 68-82 Clock rebuild service, standard.................... 129.95
I-759 81-82 Console gauge bezel, w/oil temp................ 89.95 S-153 68-82 Clock rebuild service, quartz........................ 129.95
I-2103 82 Console gauge bezel, Collector Edition....... 119.95
ZSF-373 77-82 Console gauge bezel screw set (9) .............. 4.50 set
I-759 I-760
M-344
D-444 D-306 D-309 D-445 D-321 D-323 D-830 D-829
D-473 D-474
KHE-300 Series
I-828 The perfect mix of old school looks and new school technology.
Forget loose cassettes
or CDs just plug your
I-749 MP3 or iPod right into
the face. Digital AM/FM
Speaker tuner with 16 presets
(12 FM) plus seek/scan,
I-895 70-82 Dash speaker, 4x 6, GM upgrade, auto stereo/mono mode
speaker for 4 ohm system ......................... 29.50 each and power antenna
I-896 70-82 Dash speaker, 4x 6, factory speaker for lead. Separate bass and
10 ohm system .......................................... 42.50 each treble controls, fader,
I-828 78-82 Dash speaker grill (LH or RH) ...................... 16.95 each dual auxiliary inputs,
I-894 78-82 Rear speaker, 6x 9, GM (M) ..................... 28.00 each quartz clock and LCD
I-822 78-82 Rear speaker grill (LH or RH) (M)................ 31.50 each illumination. 200 watts
I-825 78-82 Rear speaker & grill bracket (LH or RH) (M) 23.95 each (50 x 4) of power.
SF-710 78-82 Rear speaker grill & mount screws (12 pcs) 3.00 set
I-749 68-69 Kick panel speaker, correct reproduction,
w/mounting brackets (2 per car) ............. 27.50 each XR-179 68-76 KHE-300 series .............................................. 269.95
SF-381 68-69 Kick panel speaker screw set (1 speaker) .... 2.50 set XR-180 77-82 KHE-300 series .............................................. 269.95
See page 125 for radio power leads with connectors 68-76 Retro Radio
See page 126 for speaker harnesses Enjoy the benefits of modern electronics while maintaining your
Corvettes original look.
Chrome metal face
78-82 Rear Speaker with large push buttons
I-825
M
bracket is spot-on to factory
radio plus the shafts
accept OE knobs for an
authentic appearance
(knobs not included, must purchase separately). Features digital
speaker AM/FM tuner with LCD display, seek/scan, input for iPod or similar
player (rear extension cable), RCA pre-outs, CD changer compatible
and remote control. 180 watts (45 x 4) of power.
I-822 speaker XR-186 68-76 AM/FM Retro radio................................... 349.95
grill
XR-111
Stereo Speakers
Kenwood Receiver/CD Player Kenwood Receiver/CD Player Upgrade your Corvettes original speakers
Includes OE-style custom console bezel. The Includes OE-style custom console bezel. Simply with a pair of these rich sounding 4x 6
perfect way to add premium sound to your reinstall your factory gauges and crank up coaxial replacements. Fit factory dash and
Corvette without ruining your original the jams! AM/FM/CD player may not be kick panel openings with no modifications.
bezel. AM/FM/CD player is SIRIUS satellite, satellite ready or control your iPod but its 40 watts. Sold in pairs.
HD Radio and iPod ready. Features front a powerhouse. Features front panel auxiliary XR-111 70-76 Stereo speakers ........ 39.95
panel auxiliary input, 24 presets, seek/scan, input, 18 presets, seek/scan, bass/mid/treble
3-band equalizer, (2) RCA pre-outs, remote controls, (1) RCA pre-out, remote control,
control, detachable face, clock and blue detachable face, clock and red illumination.
illumination. 200 watts (50 x 4) of power. 200 watts (50 x 4) of power.
XR-153 68-76 Kenwood CD player XR-185 68-76 Kenwood CD player
w/gauge bezel....... 459.95 w/gauge bezel....... 389.95
XR-151 77-82 Kenwood CD player XR-188 77-82 Kenwood CD player
w/gauge bezel....... 429.95 w/gauge bezel....... 389.95
XR-128
XR-125
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 INTERIOR 157
68-82_26_158-169_ExteriorTrim_priced 6/26/10 10:32 AM Page 158
WS-483 crossmember
bracket
V crossmember
Replacement Bolt Kit
Includes all bolts needed to install
bolt
ZBU-215 front bumper and brackets.
ET-300 BU-350
license bezel
bumper
mount screw
inner
support rod
brace BU-359
bolt rear bumper
outer brace
Rechromed Bumpers
If your Corvettes bumpers are in otherwise good condition but have
bumper bolt
lost their luster, consider rechroming instead of replacement. For a
wallet-friendly $199.00 per front or rear, Zip can return your originals to
a Wow! shine. Call your Zip Products sales representative for details.
Rear Bumper Brace
BU-368 68-73 Rear bumper center brace, frame to brace
BU-367 68-73
(LH or RH) (C) ...........................................
Rear bumper center brace, brace to
19.50 each
Spoiler & Lower Valance
bumper (LH or RH) (C) ............................. 19.50 each
BU-321 68-73 Rear bumper outer brace (LH or RH) (C).... 25.50 each 68-72 Spoiler & Valance Panel
BU-351 68-73 Rear bumper brace to frame serrated X-217 68-72 Front spoiler ................................................. 38.95
washer........................................................ 1.50 each BL-359 68-72 Front spoiler mount kit (8 pcs).................... 7.95 kit
BU-316 68-73 Rear bumper inner support rod (C) ............ 15.00 each GR-331 68-72 Valance panel (pm) (D)................................. (1)
172.50
BU-366 72-73 Rear bumper outer support rod (LH or RH) 37.50 each F-586 68-72 Valance panel (hand laid) (D) ....................... (1)
107.50
F-545 68-72 Valance panel (hand laid), includes
bonding strips (D) ..................................... (1)
155.00
PFG-351 68-72 Valance panel bonding strip (LH or RH) ..... 39.50 each
BU-321
WS-4475 68-72 Valance panel seal (D).................................. 15.50
GR-336 68-72 Valance panel seal retainer, fiberglass (D) .. 82.50
BU-368 BU-316
ZSF-475 68-72 Valance panel seal staples (25) (D) ............. 4.50 set
X-217
BU-367 BU-366
BL-359
Reproduction Bumper Bolt Kit BU-353
bonding strip
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST EXTERIOR TRIM 159
68-82_26_158-169_ExteriorTrim_priced 6/26/10 10:32 AM Page 160
SFB-096
Fender Reinforcement
BU-393 73-74 Fender side lower reinforcement center retainer
(LH or RH) (F) ............................................ 21.50 each
upper retainer
BU-412 73-74 Fender side upper reinforcement lower
(LH or RH) (F) ............................................ 10.50 each reinforcement
SF-651 73-74 Fender side lower & upper reinforcement
rivets (6) (F)............................................... 3.00 set
outer
M-2637 73-74 Front end reinforcement, mounts to retainer
front of hood surround (F) ....................... (1)
109.50
BU-432 73-74 Front end upper surround panel
front bumper cover
support (E)................................................. 29.95
lower
reinforcement
spoiler mount
spoiler 74-79 Rear Bumper
Bumper Cover & Retainer
BU-377 76-79 Rear bumper cover, urethane (I) ................. (2)
499.95
SRB-077 74 Rear bumper cover, TruFlex, 1-piece
Bumper Support w/split & letter dimples ............................ (2)
349.95
SRB-084 75 Rear bumper cover, TruFlex, w/letter
BU-405 73-74 Front bumper outer brace (LH or RH) (E)... 109.50 each dimples (I) ................................................. (2)
349.95
BU-437 73-74 Front bumper outer brace extension (E)..... 11.50 each SRB-085 76E Rear bumper cover, TruFlex, w/plaque
WS-621 73-74 Front bumper brace inner skirt seals........... 8.50 pair indention (I) .............................................. (2)
349.95
ZSF-475 73-74 Front bumper brace seal staples (25).......... 4.50 set SRB-086 76L-79 Rear bumper cover, TruFlex (I) .................... (2)
349.95
BL-516 75-79 Rear bumper cover center mount bolt,
Lower Valance Panel behind license plate area (I) ..................... 2.00
GR-327 73-74 Valance panel (smc) (E) ................................ (1)
69.50 BU-345 74-79 Rear cover outer retainer (LH or RH) (I) ..... 22.00 each
BL-515 73-74 Valance panel mount bolt kit (E) ................. 8.00 kit BU-346 74-79 Rear cover upper retainer (LH or RH) (I) .... 22.00 each
M-3736 73-74 Valance panel reinforcement BU-372 74 Rear bumper center brace, rubber .............. 32.50 each
(LH or RH) (E) ............................................ 22.00 each BL-518 74 Rear bumper center brace to frame
M-3737 73-74 Valance panel reinforcement rivets (6) ....... 2.00 set hardware (4 pcs) ....................................... 3.50 set
reinforcement
Impact Bar & Support
BL-584 74 Rear bumper cover lower bolts (2 pcs) ....... 3.50 set GR-332
BL-579 74 Rear bumper impact bar bracket bolt ......... 7.50 each
BL-578 74 Rear bumper impact bar reinforcement
bolts (6 pcs) ............................................... 4.00 set
center retainer
BL-577 74 Rear bumper impact bar mount
upper retainer
bolts (8 pcs) ............................................... 5.00 set
BL-573 74 Rear bumper impact bar rivet kit (4 pcs)
(2 kits per car) .......................................... 3.50 set
BL-575 75-79 Rear bumper absorber to bumper
bolts (8 pcs) ............................................... 6.00 set
outer brace
BL-576 75-79 Rear bumper absorber to frame
bolts (5 pcs) ............................................... 6.50 set absorber
BL-586 75-79 Rear bumper to impact bar bolts (3 pcs) .... 4.50 set
BL-574 75-79 Rear bumper impact bar bracket side retainer
bolts (20 pcs) ............................................. 26.00 set front bumper cover
H
80-82 Front Bumper
73-82 Bumper Covers
All 74-82 Corvettes rolled out of the factory with urethane bumpers
(73 was front only). While a great choice due to its ability to bend and 80-82 Rear Bumper
stretch, with age and exposure to the sun urethane will shrink, ripple,
become brittle and eventually break into pieces. Before Flexi-glass, and Bumper Cover & Retainer
now TruFlex, the only substitute was a fiberglass replacement that was BU-390 80-82 Rear bumper cover, urethane ...................... (2)
499.95
vulnerable to the slightest impact. SRB-106 80-82 Rear bumper cover, TruFlex ......................... (2)
349.95
BU-345 80-82 Rear cover outer retainer (LH or RH) (I) ..... 22.00 each
Zips TruFlex bumpers are constructed of fiberglass and a revolutionary BU-346 80-82 Rear cover upper retainer (LH or RH) (I) .... 22.00 each
resin that make them 70% more flexible than fiberglass-only bumpers.
TruFlex features a black gelcoat finish that has the look and feel of
urethane and also adds to the fiberglass flexibility. Genuine TruFlex
bumpers will not shrink, warp or ripple, require no flexing agent when
painting, and will match the painted surface of your Corvette. Settle for
nothing less than the finest bumper available!
SRB-106
Stainless Cover Retainers
A great alternative to costly OE-correct
retainers or reusing rusty originals
73-82 License Mount
when installing a new bumper cover. Front License
100% stainless steel. Includes nuts and
integrated washers. BU-305 73-74 License bracket ............................................. 19.50
WS-483 73-79 License bracket bumper ............................... 1.50
ZBU-387
ZBU-215 73-79 License plate attaching bolt & nut kit ......... 2.50 pair
BU-350 73-82 License plate stainless trim .......................... 16.95
ZBU-386 73-74 Front bumper cover retainers (14) .............. 29.95 set
ZBU-387 75-79 Front bumper cover retainers (14) .............. 29.95 set Rear License
ZBU-388 80-82 Front bumper cover retainers (16) .............. 29.95 set WS-4581 73-79 License plate bumper ................................... 1.50
ZBU-389 74-82 Rear bumper cover retainers (18) ............... 29.95 set ZBU-215 73-82 License plate attaching bolt & nut kit ......... 2.50 pair
BU-350 73-82 License plate stainless trim .......................... 16.95
outside
upper
M grill bracket
inner lower bracket bracket bolt
bracket
speednut U-nut
outside
lower
bracket mount screw
lower molding grill
grill mount screw
U-nut
outer
inner bracket w/hardware bracket
69 Grill & Components
GR-300C 68-69 Grill, center................................................... 59.95
GR-300 68-69 Grill (LH or RH) (K) ...................................... 59.95 each 73-74 Grill & Components
GR-313 69 Grill inner brackets (K)................................. 49.95 pair
GR-301 69 Grill outer & park lamp support bracket GR-317 73 Grill (LH or RH)............................................. 89.95 each
(LH or RH) (K) ........................................... 34.50 each GR-315 74 Grill (LH or RH)............................................. 59.95 each
ZSF-324 68-69 Grill mount screw set (12) (K) ..................... 4.00 car Note: 73 and 74 reproduction grills are made of high-impact plastic. 73 grills
GR-365 68-69 Grill mount screw & U-nut set (24 pcs) (K) 9.00 car include chrome leading edge as original.
GR-302 68-69 Grill lower molding (LH or RH) (K) ............. 174.95 each ZSF-325 73-74 Grill mount screw set (12) ........................... 4.50 car
GR-362 68-69 Grill lower molding speednut set (10) (K) .. 2.50 set
GR-315
U-nut
inner bracket GR-308
speednut GR-317
outer 73-74 Grill 80-82 Grill
bracket
162 EXTERIOR TRIM Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_158-169_ExteriorTrim_priced 6/26/10 10:32 AM Page 163
Antenna
68 Manual Antenna Components Reproduction Power Antenna
A-206 68 Antenna body (O) ........................................ 25.00 New reproduction antenna for 78-82 Corvettes without factory CB.
A-214 68 Cable (O) ...................................................... 34.95 Correct plastic case for 81-82, and will install using factory brackets on
WS-402 68 Gasket (O) .................................................... 2.00 79-80. 78 antenna includes correct mounting brackets. Retracts when
A-210 68 Ground/mounting plate (O)........................ 22.50 radio is switched off or ignition is keyed off. Zip recommends A-364
M-2780 68 Ground strap ................................................ 5.50 install kit for complete installation includes correct coax cable, mount
M-3263 68 Ground strap bolt & washer ........................ 1.00 bracket and wiring harness from relay to antenna.
A-205 68 Mast & nut (O) ............................................. 12.00
A-208 68 Nut (O) ......................................................... 7.50
A-202 68 Nut spacer (O).............................................. 7.00
A-364
O antenna
mast
P
A-309
mast
retainer nut
nut nut
nut spacer A-374 78 Power antenna assembly ............................. 199.95
nut spacer A-309 79-82 Power antenna assembly (Q)....................... 169.95
gasket
gasket A-364 78-82 Power antenna install kit ............................. 47.95
ground rubber
plate bumper
ET-300
upper trim
SF-649
Side Louvers
ET-57 69 Side fender louver, GM, 4 louvers
molding mount kit
per side (LH or RH) (R) ............................. 74.95 each
ET-491 69 Side fender louvers set, reproduction ET-405
(LH or RH) (R)............................................ 99.95 side
SF-340 69 Side fender louver mount screws (16) (R) .. 12.50 car
ZSF-472 69 Side fender louver well nuts (8) (R) ............ 10.00 side
ET-326 70-72 Side fender louver (LH or RH) (S) ............... Call
ET-374 70-72 Side fender louver lower retainer (S).......... 8.50 each ET-424
ZSF-342 70-72 Side fender louver screws (4) (S) ................ 3.00 car
SF-653 70-72 Side fender louver screws (4), U-nuts (4)
& nut (2) kit (S) ......................................... 5.50 car
ET-514 80-82 Side fender louvers (reproduction) ............. 43.95 pair
ET-513 80-82 Side fender louvers, chrome ........................ 54.95 pair ET-322
ET-436
ET-321
lower
mount screw retainer louver
screw
R
louver
S louver Rocker Molding Repair
69 Side Louver 70-72 Side Louver An easy repair for broken, stripped or
missing rocker molding screws and
retainers. Simple bolt/nut combo
replaces original-style retainers.
Includes correct screws for attaching
Side Louvers Kit moldings.
Zip makes adding factory
option 69 fender louvers
simple! Full car set includes BL-305 70-77 Rocker molding repair kit ............................ 30.95 kit
rubber well nuts and correct
head screws as original.
Available in GM-issue or
replacement.
ET-428 69 Side fender louver set, GM .......................... 549.95 kit
ET-492 69 Side fender louver set, reproduction........... 209.95 kit
Left-hand (LH) = drivers side; right-hand (RH) = passenger side
See inside back cover for special freight charge (1)
spoiler
mount kit
spoiler
X
68-72 Front Spoiler
seal kit
vent grill
rivet ET-332 73-79 Front Lower Spoiler
metal shield
ET-420
drain tube
V ET-310 ET-304 BL-359 BL-360
molding clip
door grill
drive rivet
fender molding
Pace Car Spoilers
outside mirror
X-668
bracket mirror
screw
bracket
ET-372 screw
gasket
Y
Luggage Rack T-Top Carriers 68-79 Outside Mirror
OE-style brackets for mounting roof
panels to factory (dealer installed)
luggage rack. Includes front and
rear brackets plus harness strap for
holding tops in place. Mount using Outside Mirrors
rack alignment pins. Replace your Corvettes driver
MR-355
sport mirror
MR-354 68-74 Outside mirrors............................................. 99.95 set
MR-384 68-74 Outside mirrors, Made in USA ..................... 119.95 pair
MR-355 75-79 Outside mirrors............................................. 99.95 set
MR-385 75-79 Outside mirrors, Made in USA ..................... 119.95 pair
gasket
MR-318
Z
MR-363 77-82 Sport Mirror
Left-hand (LH) = drivers side; right-hand (RH) = passenger side
See inside back cover for special freight charge (1)
Rear Window
upper T-top center
HT-349 68-75 Hardtop rear window glass, tinted.............. Call molding molding
GL-304 68-72 Rear glass, Coupe ......................................... 219.95 screws
GL-335 68-72 Rear glass, Coupe (undated) ....................... 169.95
GL-305 73-77 Rear glass, Coupe ......................................... 219.95 upper
molding
GL-336 73-77 Rear glass, Coupe (undated) ....................... 179.95
GL-306 78-82 Rear glass...................................................... 699.95 truck
GL-337 78-82 Rear glass (undated) .................................... 599.95 truck
M-3852 82 Rear glass opening assist rod,
Collector Edition ........................................ 79.95 each
Note: 78-82 rear window glass does not fit 82 Collector Edition. molding
clip guide pin
bushing
Window Sticker
MF-360 68 Window sticker ............................................. 3.50
MF-361 69-72 Window sticker ............................................. 3.50
ET-440
Black-Out Paint Windshield Moldings Clips 78-82 Rear Moldings Clips
Use to return your 77-82 Corvettes chipped or
faded windshield and rear window moldings Rear Window Moldings
to like-new condition. 12 oz. aerosol.
ET-371 78-82 Rear window molding clip ........................... 2.50 each
ET-526 78-82 Rear window molding clips (21).................. 29.95 car
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 EXTERIOR TRIM 167
68-82_26_158-169_ExteriorTrim_priced 6/26/10 10:33 AM Page 168
T-328 T-316
T-326 T-308
T-330
T-430
T-324 T-306
Hood Emblems
T-405 70E LT-1 hood decal, black w/silver.................... 12.95 each
T-309 70L-72 LT-1 hood decal, white ................................. 9.00 each Side Scripts & Flags
T-212 68-69 4-2-7 hood emblems, w/speednuts.......... 29.95 set T-379 69-73 Side script, Stingray .................................. 45.00 each
T-319 70-72 4-5-4 hood emblems, w/speednuts.......... 29.95 set T-314 74-76 Side script, Stingray .................................. 45.00 each
SF-670 68-72 Hood emblem speed nut set (12)................ 3.00 set Note: 69-76 Stingray side scripts are high-quality reproductions with correct
T-420 73-74 454 hood emblems ................................... 37.95 pair black paint as original.
T-310 75-79 L82 hood emblems....................................... 49.95 pair
T-311 73-79 L48 hood emblems....................................... 17.95 pair T-334 80 Side fender emblem, L82.......................... 34.95 each
T-382 82 Side fender emblem, Cross-Fire ............... 54.95 each
Note: L48 hood emblems (similar to factory-installed L82 emblems) are not original T-315 77-79 Side flag ........................................................ 109.95 each
equipment; however, they make a nice addition to your 73-79 Corvette.
T-212 T-319
T-379 T-314
70-72 LT-1 Hood Stripe Stencil Kit Make your own factory emblems
for 327, 350, 383, 502, 572 or
Helpful guide to the correct layout and stripe spacing when repainting whatever! Chrome plated die cast
your LT-1 hood. Includes pair of front and rear stencils, squeegee and metal with red or black painted
instructions. Includes white LT-1 decals. recess. Attach with self-adhesive
tape. 1 3/8 x 5/8. Sold each.
T-423 T-428 T-423
Rear Emblem
T-301 68-73 Rear letter kit, C-O-R-V-E-T-T-E ................. 44.95 set
T-313 74-75 Rear letter kit, C-O-R-V-E-T-T-E ................. 44.95 set
T-321 76E Rear script, CORVETTE, 3/4 letters ......... Call
T-322 76L-79 Rear script, CORVETTE, 1 letters............. 44.95
T-332 80-82 Rear script, CORVETTE.............................. 48.95
ZSF-302
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST EXTERIOR TRIM 169
68-82_26_170-174_Hardtop&Conv_priced 7/13/10 10:49 AM Page 170
Convertible Top
Convertible Top Package
Includes all-new assembled frame with new canvas, pads, straps,
latches, weatherstrip and hardware. Fit frame to car before installing
top, latches and weatherstrip. Black, white or tan. No Discount.
CT-408 68-75 Convertible top complete............................(3)2,595.00
CT-371 68-75 Convertible top to body mount
bolts (correct)............................................ 10.50 set
Dated tops include correct manufacturers logo and date code stamped in window Convertible Top & Frame Restoration Kit
as original. Specify build date or serial number and year of car. Allow 3-4 weeks for Return your Sharks soft top to original condition. Zips convertible top
delivery. Note dated tops are not returnable. restoration kit uses correct, OE-style hardware and includes a new top,
stainless rear window trim tips, a frame hardware rebuild kit, deluxe
Convertible Top Installation pads and straps, tack strip material, weatherstrip and related hardware.
CT-78 68-75 Convertible top deluxe pads........................ 44.95 set Specify black, white or tan for undated top.
CT-59 68-75 Convertible top rear window trim tips,
spearhead, stainless w/screws............... 10.00 set
CT-45B 68-75 Rear window straps, black ........................... 19.00 pair
CT-311 68-75 Rear window strap retainers w/screws ....... 12.50 car CT-110
ZCT-54 68-75 Tack strip material, replacement vinyl......... 19.50 set
CT-267 68-75 Tack strip material, correct material............ 42.50 set
CT-59
CT-267
ZCT-54
CT-217
side rail front
ZSF-476 center
CT-292 303 Cleaning & Care Kit, vinyl top............................ 29.95 kit
CT-362 303 Aerospace Protectant.......................................... 16.95 A
CT-363 303 Cleaning & Care Kit, fabric top .......................... 32.95 kit Convertible Top Weatherstrip
CT-361 303 Fabric Guard........................................................ 16.95
CT-65
front rear metal bow
metal bow
rear
lower filler
Front Latch
HT-338 HT-361 header
CT-326
C trim
panel
adjustable bolt bracket
CT-34
CT-225
latch
CT-325 mount header
bolt front trim
latch panel
Front Latch & Guide Pins
latch cover
cover nut
CT-55 CT-33
T-Top
Front Guide Pins NEW Glass Tops
CT-21 68 Front guide pin bushings ............................. 5.00 pair Exact replacements for factory tops.
CT-31 69-82 Front guide pin bushing (2 per car) ............ 3.00 each Tempered LOF glass with mirror or
CT-273 68-82 Front guide pin mount bolts, black tint finish. OE-style components
12-point (4) (E).......................................... 5.00 set including latches and weatherstrip
ensure snug fit.
68-77 T-Top Latch X-207 78-82 Mirrored glass T-tops ................................... 1,129.95 pair
HT-390 68E Latch (left rear or right front) ..................... 56.00 each X-207B 78-82 Black tinted glass T-tops .............................. 1,129.95 pair
HT-389 68E Latch (left front or right rear) ..................... 56.00 each
HT-392 68L-76 Latch (left rear or right front) (E) ............... 56.00 each
HT-391 68L-76 Latch (left front or right rear) (E) ............... 56.00 each
HT-388 77 Latch, rear (LH or RH) .................................. 56.00 each
HT-421
HT-361
77
68
Latch, front (LH or RH) ................................
Latch adjustable bolt w/steel head .............
56.00
4.50
each
each
T-Top Locks
HT-338 69-76 Latch adjustable bolt w/rubber insert, Flush-mount key locks install in seconds
small head.................................................. 4.50 each with no modifications. Black finish.
WS-642 77-82 Latch adjustable bolt w/rubber insert,
large head.................................................. 4.50 each X-229 68-82 T-top locks .................................................... 39.95 pair
BL-498 68-77 Latch mount bolts (2) (E) ............................ 2.00 pair
WS-642
Luggage Rack T-Top Carriers
OE-style brackets for mounting roof panels
to factory (dealer installed) luggage rack.
HT-338 Includes front and rear brackets plus harness
strap for holding tops in place. Mount using
rack alignment pins.
68-76 T-Top Latches HT-369 68-77 Luggage rack T-top carriers ......................... 169.95 kit
latch
E front
guide pin
locator
78-82 T-Top Latch
shim HT-324 78-82 Latch, front (LH or RH) (F)........................... 56.00 each
WS-642 77-82 Latch adjustable bolt w/rubber insert,
alignment latch large head.................................................. 4.50 each
plate
plate
HT-316 78-82 Latch plastic cover (LH or RH) (F) ............... 11.50 each
screw HT-313 78-82 Lock rod bushing (F) .................................... 3.50 each
HT-318 78-82 Lock rod extension (F) ................................. 5.00 each
lock rear guide pin
housing guide
pin bolt 78-82 T-Top Latches
locating plate
F
latch
T-Top Center Lock
HT-417 68-76E Center alignment plate (4 per car) (E)........ 15.50 each bushing
HT-424 76L-82 Center alignment plate (4 per car) (F)........ 10.00 each shims
Note: HT-424 alignment plate can be used as a replacement for 68-76-Early when
alignment
attaching with SF-552 screws. plate
latch cover
SF-552 68-82 Center alignment plate screws (6) (E) ........ 4.50 set extension
HT-312 68-82 Center alignment plate shims (10) (E)(F) ... 9.00 each
HT-422 78-82 Center alignment plate plastic cover .......... 6.50 each
HT-418 68-82 Center bar lock housing w/bushing
(4 per car) (E) ............................................ 48.50 each
HT-437 68-82 Center bar lock housing plastic HT-311 HT-309 HT-308 HT-370
bushings, black (4) .................................... 10.50 set
HT-438 68-82 Center bar lock housing plastic
bushings, white (4) ................................... 10.50 set
SF-673 68-77 Center bar lock housing mount screws
(16 pcs) ...................................................... 6.50 set
T-Top Rear Guide Pins & Plates
HT-434 68-77 Rear guide triangle pin, polished
stainless (E) ................................................ 10.50 each
HT-311 68-77 Rear guide triangle pin (E) ....................... 8.00 each
HT-309 68-77 Rear guide pin locating plate, stainless
(LH or RH) (E)............................................ 11.50 each
HT-422 HT-424 HT-417 HT-418
HT-439 68-77 Rear locator nylon insert (E) ........................ 7.00 each
HT-312 ZSF-394 68-77 Guide pin plate screws (4) ........................... 2.50 set
HT-370 78 Guide pin locating lock plate (LH or RH) .... 21.50 each
HT-308 79-82 Guide pin locating lock plate (LH or RH) .... 21.50 each
Note: 78-82 guide pin locating plates include T-top lock pin bushing and alarm
switch. 78 plates are chrome plated; 79-82 are black painted.
172 HARDTOP & CONVERTIBLE Showroom sales 8:30 a.m. to 5:30 p.m. EST weekdays
68-82_26_170-174_Hardtop&Conv_priced 7/1/10 12:18 PM Page 173
T-Top Storage
HT-426 68-82 T-top storage footman loop, chrome .......... 5.00 each T-top
inner
SF-706 68-70 T-top storage footman loop hardware ........ 9.95 car weatherstrip
SF-707 71-75 T-top storage footman loop hardware ........ 16.95 car
SF-705 76-82 T-top storage footman loop hardware ........ 4.00 car inner
panel
ET-490 80-82 T-top carrier body nut .................................. 27.50 each
front latch
rear window
CT-31 BL-498 glass
adjustable I
bolt
Front Latch
HT-363
corner molding
HT-203 HT-105 HT-106 HT-111 ZHT-307 HT-200 HT-200A
rear bow
Rear Center Mount weatherstrip L
HT-203 68-75 Deck lid bezel (J) .......................................... 6.50 each Hardtop Rear Glass & Molding
HT-383 68-75 Deck lid bezel rubber washers (J)................ 1.50 each
ZHT-307 68-75 Deck lid bezel plug, used to plug deck lid
bezels when hardtop is not in use............ 2.00 each Hardtop Headliner
HT-200 68-75 Rear hold down bolt (J) ............................... 4.00 pair 68-75 headliners are perfectly contoured for an exact fit. 3-piece set
HT-384 68-75 Rear hold down bolt nuts & washers (J) ..... 1.50 car includes center section and left-hand and right-hand rear window
HT-200A 68-75 Rear hold down bolt nylon tip (J)................ 2.50 pair sections. Available in all original colors.
HT-385 68-75 Rear hold down bolt rubber washers (J) ..... 1.50 pair
HT-329 68-75 Headliner, specify color ................................ (3)
449.95 set
Rear Side Mount
HT-365 68 Rear hold down stud housing, 1/4 (K) ...... 49.50 each
HT-364
SF-617
69-75
68-75
Rear hold down stud housing, 3/8 (K) ......
Rear hold down stud housing
25.50 each Hardtop Wrench
screws (4) (K) ............................................ 4.50 set Correct reproduction of original
HT-300 69-75 Rear hold down stud (K) ............................. 12.50 each wrench supplied with Corvettes
HT-340 68-75 Rear hold down stud retainer (K)................ 9.50 each that left the assembly plant with
an installed hardtop.
housing
bezel screw Hardtop Mount Kit
bezel Includes deck lid bezels, rear hold
washer hold down stud retainer
bolt washer down bolts, side securing bolts,
side anchors with jam nuts and all
nut & washer
related hardware and gaskets.
Weatherstrip
68-82 Coupe Weatherstrip Coupe Body Weatherstrip Kit
Includes hood ledge, windshield post (68-72 with hinge pillar), door
Body Weatherstrip mains, door glass rear and T-tops weatherstrips. 68 and 69 kits include
WS-719 68-69E Door glass rear (LH or RH), 69 1st design correct inner and outer T-tops weatherstrips. Rear window weatherstrip
w/wedge & tab.......................................... 45.50 each included for 68-72 model years. Made in the USA.
WS-717 69 Door glass rear (LH or RH), 2nd design WS-4578 68 Body weatherstrip kit (12 pcs) .................... 449.95
w/square notch ......................................... 45.50 each WS-4579 69 Body weatherstrip kit (12 pcs) .................... 449.95
WS-612 69L-77 Door glass rear (LH or RH) .......................... 19.50 each WS-4467 70-72 Body weatherstrip kit (9 pcs) ...................... 359.95
WS-613 78-82 Door glass rear (LH or RH) (A) .................... 27.50 each WS-4469 73-77E Body weatherstrip kit (9 pcs) ...................... 299.95
WS-4591 78-82 Door glass rear, latex (A) ............................. 69.95 pair WS-4594 73-77E Body weatherstrip kit (9 pcs), latex ............ 429.95
SF-704 78-82 Door glass rear mount rivets (6 pcs) ........... 4.00 set WS-4587 77L Body weatherstrip kit (9 pcs) ...................... 299.95
WS-428 68-82 Hood ledge ................................................... 8.50 WS-4595 77L Body weatherstrip kit (9 pcs), latex ............ 429.95
WS-634 68-72 Rear window weatherstrip, removable WS-4470 78-82 Body weatherstrip kit (9 pcs) ...................... 309.95
rear window............................................... 35.00 WS-4596 78-82 Body weatherstrip kit (9 pcs), latex ............ 429.95
ZWS-786 68-72 Rear window weatherstrip screws (4) ......... 2.50 set
WS-4413 82 Rear window hatch weatherstrip................. 199.95
Door Weatherstrip
78-82 Body Weatherstrip WS-614 68 Door main (LH or RH) .................................. 47.50 each
door glass rear
A T-top WS-616 69-77 Door main (LH or RH) .................................. 47.50 each
weatherstrip WS-4589 69-77 Door main, latex........................................... 119.95 pair
WS-617 78-82 Door main (LH or RH) (A)............................ 44.50 each
windshield WS-4590 78-82 Door main, latex (A) .................................... 119.95 pair
post ZSF-452 68-82 Door main screws (10) ................................. 3.00 car
WS-4494 68 Door window outer seal rubber,
V shaped (LH or RH) .............................. 32.50 each
WS-674 68 Door window outer seals, replacement ........ 42.95 pair
WS-719
WS-721 69-82 Door window outer seals, replacement ........ 42.95 pair
WS-4508 69-82 Door window outer seals, reproduction........ 69.95 pair
SF-655 68-75 Door window outer seal screws (12) ............ 2.50 set
WS-717 door main
Windshield Post Weatherstrip
WS-612
WS-4486 73-82 Windshield lower filler (LH or RH) (E)......... 15.50 each
SF-712 73-82 Windshield lower filler screws (4) ............... 1.50 set
T-Top Panel Weatherstrip WS-649 68-72 Windshield post weatherstrip w/hinge
pillar (LH or RH) ........................................ 59.95 each
WS-644 68-69 T-top panel inner (LH or RH) ....................... 39.50 each WS-715 68-72 Windshield post hinge pillar only
WS-4577 68-69 T-top panel outer (LH or RH)....................... 52.50 each (LH or RH).................................................. 29.50 each
WS-645 70-77E T-top panel (LH or RH) (A)(B) ..................... 64.95 each WS-650 73-82 Windshield post weatherstrip
WS-4592 70-77E T-top panel, latex (A)(B) .............................. 179.95 pair (LH or RH) (A)(F)....................................... 29.95 each
WS-646 77L-82 T-top panel (LH or RH) (A)........................... 64.95 each WS-4588 73-82 Windshield post weatherstrip, latex............ 74.95 pair
WS-4593 77L-82 T-top panel, latex (A) ................................... 179.95 pair SF-601 68-82 Windshield post weatherstrip screws
WS-4628 70-77E T-top weatherstrip retainer (LH or RH) (B).. 37.50 each (12) (F)....................................................... 4.50 set
SF-455 70-82 T-top weatherstrip screws (8) (B) ................ 4.00 car ET-495 68-76 Windshield post weatherstrip retainer
Note: 77-Early T-top weatherstrips attach with separate retainer and 19 push pins; (LH or RH) (F) ............................................ 31.50 each
77-Late attach with internal retainer and 18 push pins. ET-494 77-82 Windshield post weatherstrip retainer
(LH or RH) (F) ............................................ 35.00 each
WS-4626 68-82 Windshield post weatherstrip retainer
T-Top Weatherstrip sealing strip (F).......................................... 7.50 pair
B WS-771 68-82 Windshield post upper glass clips (C) ......... 9.00 pair
WS-4432 77-82 Windshield post lower glass clips (D).......... 9.00 pair
SF-526 68-82 Windshield post clip mount rivets
(10) (C)(D)................................................. 3.00 car
upper lower
T-top weatherstrip glass glass
C clip D clip
Weatherstrip continued
68-75 Convertible Weatherstrip Convertible Body Weatherstrip Kit
Includes all weatherstrips attached to body: hood ledge, windshield
Body Weatherstrip posts with hinge pillar, door mains and deck lid. Made in the USA.
WS-781 68-75 Deck lid ......................................................... 34.00 WS-4465 68 Body weatherstrip kit (6 pcs) ...................... 229.95
WS-713 68-69E Door upper lock pillar (LH or RH) ............... 24.50 each WS-4466 69-72 Body weatherstrip kit (6 pcs) ...................... 229.95
WS-714 69L-75 Door upper lock pillar, fits under plastic WS-4468 73-75 Body weatherstrip kit (6 pcs) ...................... 179.95
wedge (LH or RH) (G) ............................... 24.50 each
WS-4512 69L-75 Door lock pillar plastic wedges (G) ............. 22.00 pair
SF-597 69L-75 Door lock pillar weatherstrip screws (G)..... 5.00 set
WS-428 68-75 Hood ledge (I) .............................................. 8.50 Door Weatherstrip
WS-614 68 Door main (LH or RH) (I)(J) ......................... 47.50 each
WS-718 69-75 Door main (LH or RH) (I)(J) ......................... 47.50 each
Windshield Post Weatherstrip ZSF-452 68-75 Door main weatherstrip screws (10) (J) ...... 3.00 car
retainer WS-4494 68 Door window seal outer rubber,
G sealing strip V shaped (LH or RH) .............................. 32.50 each
WS-674 68 Door window outer seals, replacement ...... 42.95 pair
WS-722 69-75 Door window outer seals, replacement (J) 42.95 pair
WS-4507 69-75 Door window outer seals, reproduction...... 69.95 pair
SF-655 68-75 Door window outer seal screws (12) (J)...... 2.50 set
screw
plastic wedge
lock pillar
weatherstrip outer window seal
screw
windshield post
weatherstrip
weatherstrip
screws door main screw
Weatherstrip Pillar
side rail front side rail center
windshield
H hinge pillar post
header side rail rear
hood rear bow
ledge
windshield post
windshield
post w/attached
hinge pillar
door main
I
68-72 Convertible Body Weatherstrip
Hardtop Weatherstrip
WS-726 68-75 Hardtop header (L) ...................................... 83.50
ZSF-476 WS-728 68-75 Hardtop rear bow (L) ................................... 99.50
WS-727 68-75 Hardtop side rail upper & rear
(LH or RH) (L) ............................................ 102.50 each
SF-594 68-75 Hardtop weatherstrip fastener kit, includes
(12) retainers w/screws............................. 21.50 set
weatherstrip
hardware
lower filler L
header
SF-594
ZWS-4421
Original-Style Latex Weatherstrip
Looking for GM weatherstrips but dont want to pay the extra cost?
ZWS-4420 68 Body seal kit (27 pcs) ................................... 35.50 set Zip has available select weatherstrips reproduced using a soft latex
ZWS-4421 69 Body seal kit (23 pcs) ................................... 33.50 set material for superior sealing. These weatherstrips are identical to those
ZWS-4422 70-72 Body seal kit (19 pcs) ................................... 27.50 set factory-installed on the Corvette assembly line!
ZWS-4471 73 Body seal kit (17 pcs) ................................... 25.50 set
ZWS-785 74-82 Body seal kit (9 pcs) ..................................... 8.50 set
Phone orders 8:30 a.m. to 8 p.m. EST, Friday til 5:30 WEATHERSTRIP 177
68-82_26_178-184_Books&Garage_priced 6/28/10 9:35 AM Page 178
Corvette Water Leak and Wind Noise Solutions NCRS Judging Manual
The most complete and informative book of its kind. Youll learn
If youre preparing for NCRS judging, or just want to know how
how to identify, diagnose and eliminate Corvette
your Corvette would have looked rolling off the
water leaks and wind noise. Whether you own
assembly line, heres the definitive source. The
a 57 with a wet trunk or a 77 with windshield
product of meticulous research by the most
frame rust, this book covers how to take
knowledgeable Corvette enthusiasts out there,
corrective action. Includes a review of tools and
each guide is a breakdown of correct finishes,
materials needed, plus easy to follow procedures.
casting numbers, part numbers and more.
Specify year. No Discount.
B-493 Corvette Water Leak and Wind Noise Solutions....... 19.95
B-455 NCRS Judging Manual................................................ 39.95
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST BOOKS & MANUALS 179
68-82_26_178-184_Books&Garage_priced 7/1/10 2:31 PM Page 180
To ensure your restoration projects are a success, Zip offers materials of only the
highest quality. Note hazardous and/or aerosol materials such as paint cannot be
shipped outside of the continental USA, or by air freight to any destination.
With a reputation for offering only the best parts Waxes & Sprays
and accessories for Americas Detail Spray
Perfect for between washes to remove light
best sports car, Zip is immersed dust and smudges. Leaves no streaks and
can be used to enhance depth and clarity of
in the best every day. And thats why we stock paint, chrome, glass, plastic and more. Also
an excellent clay bar lubricant.
Adams exclusively we feel they are simply the MG-123 Detail Spray, 16 oz. ............... 11.95
best car care products available. MG-124 Detail Spray, gallon refill....... 39.95
Buttery Wax
A blend of polymers, resins and natural
Carnauba, Buttery Wax delivers knock-out
reflection, gloss and depth. Contains no
cleaners or abrasives. Hides fine swirl marks
and will not stain plastic or rubber. Use
Revive Polish and clay bar before applying.
MG-131 Buttery Wax, 16 oz................ 19.95
Machine SuperWax
Essentials Detail Kit Leaves the shiniest shine imaginable! Seals
paint and leaves a durable gloss. Machine
We call it the Essentials kit for good reason and pack it all into a application only. Use clay bar and/or Adams
handy 4.25 gallon bucket for your convenience. Includes Car Wash, Fine Machine Polish before applying.
wash pad, microfiber drying towel, All-Purpose Cleaner, clay bar,
Detail Spray, V.R.T. vinyl, rubber and tire protectant, Swirl & Haze MG-177 Machine SuperWax, 16 oz. ... 24.95
Remover, Revive Polish, Buttery Wax, microfiber applicator pads and
polishing towels, detail sponges and an Adams instructional DVD.
MG-119 Adams Essentials detail kit......................................... 159.95
Polishes
Swirl & Haze Remover
Uses micro-compounds (less abrasive than
toothpaste) to gently remove swirls and haze
from clearcoat and painted surfaces.
MG-129 Swirl Remover, 16 oz............. 19.95
Revive Polish
Non-abrasive cleaner and shine enhancer
restores depth and clarity to paint. Removes
old wax and mild oxidation with minimal
effort. Contains no wax or polymer sealants.
MG-127 Revive Polish, 16 oz............... 19.95
Towels
Microfiber Drying Towel
Ultra-absorbent waffle weave is a whopping
24x 36. Dye-free white for softness.
MG-142 Microfiber Drying Towel ....... 14.95
MG-143 Towels, 2-pack ....................... 24.95
Cleaners
Car Wash
Step one in detailing your Corvette. Big suds
Basics Detail Kit
rinse streak-free even in direct sun. Great starter kit or the perfect gift for your favorite Corvette
enthusiast. Easy-carry box includes Car Wash, Detail Spray, Buttery
MG-121 Car Wash, 16 oz. ................... 10.95 Wax, V.R.T. vinyl, rubber and tire protectant, microfiber applicator
MG-122 Car Wash, gallon refill........... 27.95 pad and polishing towel, detail sponges and instructional DVD.
All-Purpose Cleaner MG-197 Adams Basics detail kit............................................... 64.95
Dressings
Leather Conditioner
UV-blocking agents and conditioners leave
leather soft and nourished. Rich cream.
MG-133 Leather Conditioner, 16 oz. .. 19.95
Zip is open Saturdays! 10:00 a.m. to 3:00 p.m. EST CAR CARE 183
68-82_26_178-184_Books&Garage_priced 6/28/10 9:36 AM Page 184
Sales Tax
Low Price Guarantee Any order being shipped to an address in the state of Virginia must
Zip works hard to make certain our prices are competitive. That said, have 5% added to the total parts order for sales tax.
its possible you may on occasion find cheaper merchandise
elsewhere. If it is the same brand part or accessory offered for a lower
price by another supplier, well match their published price. Note Liability Disclaimer
price must appear in a current magazine advertisement, Web site or Zip Products is not responsible for any damage, injury, loss or any
catalog to qualify. Dont sacrifice quality and customer service for other charges, caused by delays or incurred in the replacement of
the sake of a few dollars call Zip! any defective items. Zips liability is limited to the replacement and
the shipping cost of defective items only. Improper installation,
damage or injury resulting from the use of items sold by Zip
No Discount Products are the purchasers responsibility. Due to changes in the
An (ND) designation beside a part, group of parts or price indicates Corvette industry, part numbers, specifications, prices and
that No Discount is available on that part or group of parts. availability of parts can change. Consequently, there may be times
when parts are discontinued or prices increased. Changes may also
occasionally occur in our policies and terms. Call Zip during regular
Backorders business hours for up-to-date information.
Over 96% of orders ship complete; however, backorders do
occasionally occur. Most ship within 10 business days. For longer
delays, our policy is to ship orders up to 30 days old. Past 30 days
well call for authorization first. If you wish to cancel a backorder,
In-Store Shopping
please notify Zip as soon as possible. Zip strives to have all our parts and accessories available for
immediate pick-up at our showroom counter. Call before you come
and well have your order waiting. Showroom hours are 8:30 a.m. to
Receipt of Order Shortages 5:30 p.m. EST Monday-Friday and 10 to 3 Saturdays.
Inspect merchandise immediately upon receipt of order. Notify Zip
of any shortages or discrepancies in your order within seven (7) days When traveling in the Richmond, Virginia area, visit Zip Products in
from shipment date. No claims allowed after seven (7) days. Mechanicsville. Were just east of downtown Richmond, and only a
quick drive off interstates I-64, I-95 or I-295.
NPK
LE T
GRE
ately notify the carrier (UPS, truck freight company, etc.) and Zip. 64 A NIC
SVIL 638
M EC H
Keep all shipping materials (box, packing, etc.) intact until an
A T LE
95
195
MIDLO THIAN TN
PK 76
60
64 COL
E D H
LAN A R B OR
ROAD
Zip has over 20,000 parts A EET FA
ST
Y
POWHITE P ARK
W STR 156
LL
HU 295
and accessories in stock 360
O LD HUNDRED R
360
www.zip-corvette.com 64
64
81
95
85
Shipping Information Puerto Rico, Hawaii & Alaska: All Puerto Rico and Hawaii orders
can be sent UPS Ground, Next Day Air, 2nd Day Air, or through the
Zip Delivers! Post Office. Please specify shipping method preferred. Alaska is
Were proud that orders placed by 3:00 p.m. EST ship that same day divided into two UPS zones: Rural and Metropolitan. Orders to both
on in-stock items! Packages ship UPS Ground unless otherwise areas may be sent UPS Ground, 2ndSecond
DayDay
Air,Air,
or through
or through
thethe
PostPost
requested or unavailable due to location or size and weight of parts. Office. UPS Next Day Air is available only in Metropolitan areas.
Expected delivery is 1-6 business days within the continental USA.
Please provide complete street address to ensure delivery. Saturdays, A.P.O., F.P.O.: All orders going to these addresses must be sent
Sundays and holidays are not included in UPS delivery times. by the Post Office.
Canada: Orders must include full address with city and province.
All orders are shipped UPS Ground or Air unless otherwise specified
or UPS is unable to deliver to your location. To better serve our
customers, Zip is recognized as being in effect an agent of the
Canadian government, a status that allows us to collect all duties,
taxes and brokerage fees at the time your order is processed. This
arrangement means you know the exact cost to have parts delivered
to your door no hidden costs for your shipments!
CHEVROLET, the Chevrolet emblem, CORVETTE, Corvette emblems, GM and AC-Delco
are trademarks of General Motors Corporation.
2010 Zip Products, Inc. All rights reserved. No part of this publication may be reproduced
2009
without the prior written consent of Zip Products. Content is based on information believed
to be reliable, but cannot be guaranteed. Printed in the USA.
Zip Products
8067 Fast Lane
Mechanicsville, VA 23111
Zip Installs!
If turn-key sounds more appealing than do-it-yourself, Zips in-house installation facility means you can drive away with clean hands, a big
smile and confidence. Its manned by talented professionals, and all
work performed is backed by our customer satisfaction guarantee. With
30 years of Corvette experience behind our name, we recognize and
appreciate the value of your trust.